60105059GB.fm Page 1 Thursday, June 30, 2011 5:16 PM
GB
A. “Door open” indication
This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
Programme
Mixed
Cotton
Temperature
20 - 60 °C
20 - 95 °C
Care
Labels
PROGRAMME CHART
Max.
Load
J
L K
M
Type of wash/Notes
G
C
D
H
E F
A
B
I
E. Programme selector
F. “Start (Pause)” button
G. “Spin” button
H. Programme sequence indicator
I. “Reset/Drain” button
J. “Start delay” button
K. “Temperature” button
L. “Child lock” button combination
M. “Detergent overdosage” indication
Detergents and additives
Prewash
Main wash
Softener Clean + Start delay
Special options
Prewash
Intensive rinse
Easy ironing
Rinse hold
Spin
Max
Spin
Speed rpm kg - Respect the manufacturer’s recommendations on the care label
6.0
Slightly to normally soiled robust laundry made of cotton, linen, artificial fibres and their blends.
Effective one-hour program. Make sure to wash only similar colours together in one wash load. If soil level requires, add oxygen-based stain removers.
— Yes ❉ — ❉ — ❉ ❉ ❉ ❉ max.
9.0
Normally to heavily soiled towels, underwear, table and bed linen etc. made of cotton and linen.
❉ Yes ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ max.
Synthetics
20 - 60 °C 3.5
Normally soiled blouses, shirts, overalls, etc. made of polyester (Diolen, Trevira), polyamide (Perlon,
Nylon) or blends with cotton.
❉ Yes ❉ ❉ ❉ ❉ ❉ ❉ ❉ ❉ max.
Delicates
Wool/Handwash
White
20 - 40 °C
20 - 40 °C
20 - 60 °C
2.5
Curtains and delicate clothing, dresses, skirts, shirts and blouses.
2.0
Woollens, labelled with the Woolmark and identified as machine washable, as well as textiles made of silk, linen, wool and viscose marked as handwashable.
This programme is tested and approved by The Woolmark Company for machine- and handwashable wool.
Select spin speed according to the manufacturer’s recommendations on the care label.
9.0
Normally to heavily soiled and robust white cotton laundry.
Save energy by selecting a lower wash temperature and adding an oxygen-based bleach product, in addition to your detergent.
❉ Yes ❉ — ❉ ❉ — — ❉ ❉
1000 1)
— Yes ❉ — ❉ — — — ❉ ❉
1000
1)
— Yes ❉ ❉ ❉ — — — ❉ ❉ max.
Light colours
20 - 60 °C 6.0
White and pastel shaded garments made of delicate fabrics.
Gentle wash program to avoid graying or yellowing of your laundry. Use heavy duty detergent, if necessary also stain removers or bleaches on oxygen basis. Do not use liquid detergent.
— Yes ❉ — ❉ — — — ❉ ❉
1000 1)
Dark
SuperEco
AquaEco
Speed 15
Eco Cotton
Rinse & Spin
20 - 60 °C
20 - 60 °C
20 - 40 °C
20 - 30 °C
60 °C
— —
6.0
9.0
3.0
3.0
9.0
9.0
Black and dark garments made of cotton, cotton blends and polyester.
Special program to reduce colour fading and local discolouration. Prefer to use a liquid detergent for dark garments with this program.
Normally to heavily soiled and robust underwear, table and bed linen, towels and shirts made of cotton and linen.
Offers highest economy in energy consumption by prolonged washing duration. Ideal to be run overnight to additionally profit from the more favourable energy rates. To avoid noise of spinning at night, set spin speed to “0” and start spin programme in the morning, or define programme start with “Start delay” accordingly.
Lightly soiled laundry made of synthetic fibres, or synthetics mixed with cotton garments.
Saving programme with a very low water consumption. Use liquid detergent and the lowest recommended amount for 3kg laundry. Do not use softener.
Briefly worn clothing made of cotton, artificial fibers and blends with cotton.
Refresh program. Use lowest recommended detergent amount.
Heavily soiled and robust laundry washable at 60°C such as bed linen, table linen towels etc.
The extended programme duration enables economic energy and water consumption while maintaining good washing results.
Rinse and intensive spin programme.
Same as the last rinse and the final spin in the “Cotton” programme.
— Yes ❉ — ❉ — ❉ — ❉ ❉
1000
1)
— Yes ❉ — ❉ — ❉ — ❉ ❉ max.
— Yes — — ❉ — — — ❉ ❉ max.
— Yes ❉ — ❉ — — — ❉ ❉ max.
— Yes ❉ — ❉ — ❉ — ❉ ❉ max.
— — ❉ — ❉ — ❉ — ❉ ❉ max.
Spin — — 9.0
Intensive spin programme.
Same as the final spin in the “Cotton” programme.
❉ : optional / Yes : dosing required
For improved garment care, spin speed is restricted in this programme.
— — —
The Wool/Handwash cycle has been tested and approved and approved by The Woolmark Company for the washing of
Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the instructions on the garment label and those issued in this programme chart. M0702
— ❉ — — — — ❉ max.
5019 601 05059
Black process 45,0° 150,0 LPI
60105059GB.fm Page 2 Thursday, June 30, 2011 5:16 PM
CONSUMPTION DATA
Programme
Mixed
Cotton
Cotton
Dark
***
Cotton
Synthetics
Synthetics
Delicates
Wool/Handwash
White
Light colours
SuperEco
AquaEco
Temperature
(°C)
40
95
60
40
60
40
30
40
40
40
40
60
40
Load
(kg)
6.0
9.0
9.0
9.0
3.5
3.5
2.5
2.0
9.0
6.0
6.0
9.0
3.0
Water
(l)
73
87
64
82
46
**
**
42
60
45
82
70
49
80
19
Energy
(kWh)
0.60
2.60
1.53
0.80
0.85
0.50
0.40
0.60
0.90
0.50
0.60
1.08
0.45
Approx. Programme Duration
(hours : minutes)
1:00
2:20
2:30
2:15
1:35
1:20
0:45
0:40
2:30
1:20
1:40
4:00
1:00
*
Speed 15
Eco Cotton
30
60
3.0
9.0
30
64
0.20
1.17
0:15
4:00
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
*
**
The time indicated on the display can deviate from the values in the table, because it takes into account the operation conditions applicable at that time.
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
*** Reference Programme for Energy Label (with separator in detergent dispenser removed for use of powder detergent).
“Prewash” button
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
Load your laundry, close the door properly and add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use (remove separator in detergent dispenser for use of powder detergent if necessary).
1.
Turn the programme selector to the desired programme. The display shows the programme duration in hours and minutes as well as the predefined temperature. The “Start (Pause)” button
2.
The temperature can be altered by pressing the
“Temperature” button.
3.
The indication lamp of the predefined spin speed lights up; in case you want to set another spin speed, press the “Spin” button .
SELECT ANY DESIRED OPTION
Push the button(s) of any option(s) desired - the respective indication lights up.
When the combination of programme and option is not possible, the lights switch off automatically. Unsuitable combinations of options are deselected automatically.
“Clean +” button
• Choose this option if you use an in-wash additive for stain removal
(powder, for example “Vanish”) - it will optimize the additive’s efficiency to get better wash performance and stain removal.
• Choose temperature of 30 or 40°C and use with maximum load.
• Add an appropriate amount of in-wash additive for stain removal (powder) to the main wash chamber, together with your detergent (only use powder detergent with this option).
Respect the manufacturer’s dosing instructions.
• Prolongs the programme by approx. 10 to 15 minutes.
• Appropriate for use of stain removers and bleaches on oxygen basis. Chlorine or perborate bleaches must not be used!
• Only for heavily soiled loads (for example sand, granular dirt).
Increases the cycle time by approximately 15 min.
• Do not use liquid detergent for the main wash when activating the Prewash option.
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with very soft water, washing baby linen and helping people with allergies.
“Easy ironing” button
• Reduces creasing by an increased water quantity and a very gentle spin.
“Rinse hold” button
• Press the button if you want to postpone spinning to a later time or if you want to drain only.
• The laundry will remain in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.
• Do not leave the laundry to soak in the “Rinse hold” for too long.
• The washing machine stops to rinse hold as soon as the “Rinse hold” light in the programme sequence indicator blinks; the
“Start (Pause)” button also blinks.
To terminate the “Rinse hold”:
• If you want to drain only without spinning: Press the “Start
(Pause)” button to start the drain process.
• If you want to spin your laundry: Press the “Spin” button to select the desired spin speed and then “Start (Pause)” to start the spin cycle.
“Spin” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If you select spin speed “0”, the final spinning is cancelled and the water is drained out only. However, intermediate spin phases remain during the rinse.
START DELAY
The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating the “Start delay”.
• Select programme, temperature and options.
• Press the “Start delay” button to select a delay time up to 23 hours; the light of the “Start (Pause)” button blinks.
• Press the “Start (Pause)” button ; the countdown of the delay time begins. The light of the “Start (Pause)” button stops blinking and is on; the light of the start delay button will keep blinking until the programme starts.
• As soon as the programme starts, the start delay on the display is replaced by the remaining programme time, and the light of the “Start delay” button goes off.
• Once having pressed the “Start (Pause)” button , the number of hours preselected can be changed by pressing and holding the “Start delay” button.
To cancel the “Start delay”
..before you press “Start (Pause)” :
• Turn the programme selector to another position or press the
“Reset/Drain” button .
..after having pressed “Start (Pause)” :
• Press “Start (Pause)” - the delay time disappears from the display; press “Start (Pause)” again to start the selected programme immediately.
PROGRAMME START
Open the tap and press “Start (Pause)” ; the light stops blinking and is on. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain.
The display shows the remaining programme time. Due to variations in load and temperature of inlet water, the remaining time is newly calculated in certain programme phases. If this is the case, an animation appears on the display .
CHILD LOCK
Activating the child lock prevents children from starting a wash cycle or changing the settings of a running programme. The child lock cannot be activated or deactivated when the programme selector is in the “Off/O” position. To activate the child lock:
• Turn the programme selector to a programme position, or run a programme as usual.
• Press the 2 buttons marked with the key symbol simultaneously for at least 3 seconds; a key-like symbol will shortly appear on the display to indicate that the child lock is active.
Any time you try to change a programme setting with active child lock, the display will briefly show a key-like symbol. The programme setting cannot be changed anymore; the only change possible is to switch the washer off by turning the programme selector to the “Off/O” position. To deactivate the child lock:
• Press again the 2 buttons marked with the key symbol simultaneously for at least 3 seconds.
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the lamp lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Reset a running programme before the end”.
RED INDICATIONS
“Service”
Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your
Instructions for Use; if the fault persists, contact our After Sales Service.
“Water tap closed”
The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting
Guide” in the Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the
Instructions for Use (“Removing the Filter”).
PROGRAMME END
• The display shows “End” and the “Door open” indication lights.
1. Turn the programme selector to the “Off/O” position.
2. Close the water tap.
3. Open the door and unload the machine.
• Leave the door ajar to allow the drum to dry.
DETERGENT OVERDOSAGE INDICATION
In case you used too much detergent, a small vertical bar will light next to the overdosage symbol on the right of the display when the wash programme is finished; use less detergent next time. Too much foam by detergent overdosing can also lead to interruption of a wash cycle; in this case the display shows “Fod” - follow the recommendations in the “Troubleshooting Guide” in your
Instructions for Use to solve the problem.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1.
Press “Start (Pause)” to pause the programme; the light blinks.
2.
Select the new programme, temperature, any options and another spin speed if you want.
3.
Press “Start (Pause)” again. The light is on, and the programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.
RESET A RUNNING PROGRAMME BEFORE
THE END
The “Reset/Drain” button cancels a programme before the end.
• Press the “Reset/Drain” button for at least 3 seconds; “rES” appears on the display. The water is drained out; it may last some time until the door can be opened.
5019 601 05059
Black process 45,0° 150,0 LPI
