PRODUCT SHEET
Your new appliance is a combined ventilated, No-Frost fridgefreezer exclusively for domestic use.
Whirlpool Total-no-frost fridge freezers circulate chilled air around the storage areas, reducing humidity to prevent the formation of ice, thereby completely eliminating the need for defrosting. Frozen items don’t stick to the walls, labeling stays legible and storage space remains neat and clear. No-Frost’s temperature control helps keep food fresher for longer.
HOW TO OPERATE THE REFRIGERATOR
GB
For any optimum performance of the antibacterial filter, replace the filter every 6 months.
1.
Remove the filter and dispose as a whole (grate box + insert).
2.
Replace the filter and the grille with the new ones.
3.
The replacement procedure is attached to the filter.
Our After-sales Service can supply this type of filter.
A. Refrigerator Compartment
1.
Shelves / Shelf area
1a.
Plastic “Dual” shelf (depending on the model)
2.
Lighting
3.
Cooler compartment (depending on the model)
4.
Crisper drawers
5.
Door trays
6.
Removable bottle holder (depending on the model)
6a.
Separator (depending on the model)
7.
Bottle rack
8.
Rating plate
9.
Antibacterial filter (depending on the model)
10.
Air control (depending on the model)
B. Freezer Compartment
11.
Upper basket (freezing zone)
12.
Ice tray
13.
Shelves (depending on the model)
14.
Storage basket for frozen food items
15.
Freezer compartment door
16.
The freezer door trays for pizza or other frozen products with short storage time (depending on model)
C. Light switch off button (depending on the model)
D. Internal controls
Notes:
• The number of shelves and configuration of accessories may vary, depending on the model. All shelves and door racks are removable.
• The appliance accessories are not suitable for washing in a dishwasher.
• The internal temperatures of the appliance depend on the ambient temperature, frequency of opening the doors, as well as location of the appliance. Take these factors into consideration when setting the thermostat knobs.
The anti-bacterial filter helps trap and kill airborne microorganisms caught within it. Remove it from the box found in the crisper drawer
(item 4) and insert into the grille (item 9).
Starting up the appliance
• Insert the plug into the mains socket.
• The appliance will switch on automatically unless knob (2) is on position OFF .
• The inside light switches on when both doors are opened
To switch the appliance off, turn the knob (2) to OFF.
Attention:
• There is no need to adjust the thermostat knob as the temperature is factory set to ensure the correct storage temperature for fresh foods at ambient temperatures between +20°C and +25°C.
• After being switched on, the refrigerator needs approximately 2 hours to reach the correct temperature to store a typical volume of food in the refrigerator compartment
Vacation
This function turns the appliance to a warmer state if you are going away for some time. To select the function, turn the vacation symbol on both knobs. To turn the refrigerator back to setting point repeat this procedure.
Important: after activating this function, remove all perishable foodstuffs from the refrigerator compartment and leave the door closed, since the refrigerator maintains a suitable temperature to prevent the formation of unpleasant odours.
To adjust the temperature (if necessary):
Turn the thermostat control knob (2) :
- Towards position 1 , if the temperature inside the compartment is too cold
- Towards position 7 for colder temperatures
- To position OFF to switch the appliance off.
Recommended thermostat position is 3-4.
Notes:
In models without the cooler compartment, use control (4) to adjust air circulation in the lower part of the refrigerator.
HOW TO OPERATE THE COOLER COMPARTMENT
(depending on the model)
The appliance is equipped with a cooler compartment.
To adjust temperature (if necessary), rotate the air regulator ( 4 ):
• Towards position (+) for cooler temperatures
• Towards position (-) for less cool temperatures.
It is possible to remove the basket of the Cooler compartment.
HOW TO OPERATE THE FREEZER COMPARTMENT
REPLACING THE LIGHT BULB
Always disconnect the refrigerator from the power supply before replacing any light bulb. If the inside light is not working, it is necessary to:
1.
Remove the light cover: put the fingers into the side ventilation holes (1), stretch the cover gently and move it upwards.
2.
Remove the bulb pulling it out of the holder (do not rotate).
3.
Check the bulb and replace (if necessary) by pushing its terminals into the holder sockets until it stops.
4.
Put on the light cover.
The appliance is equipped with a special push-in light bulb.
This bulb is available only from our After-sales Service. The bulb should not exceed 15W .
Do not leave uncovered the bulb.
Care and Maintenance
When cleaning, especially with the light cover removed, take special safety precautions and do not touch the light bulb.
• When the appliance is plugged in, the freezer compartment switches on automatically.
Attention:
• There is no need to adjust the thermostat knob as it is factory set to ensure the correct storage temperature for frozen foods in the freezer compartment at ambient temperatures between +20°C and +25°C.
• After switching on, the freezer compartment takes approximately
3 hours to reach a suitable temperature for frozen food storage.
To adjust the internal temperature (if necessary):
Turn the thermostat control knob (1):
- Towards position 1 for less cold internal temperatures.
- Towards position 3 for colder temperatures.
- To position to use the fast freeze function.
Recommended thermostat position: 2-3.
How to freeze fresh food
1.
24 hours before freezing fresh food, turn the knob ( 1 ) to position
; when turning from 3 to pos. , the knob is slightly stiff and the yellow indicator (3) near the symbol lights up.
2.
Place food in the drawer, leaving enough space for air to circulate around packs.
3.
For more efficient freezing, turn the knob (2) to position 7 .
4.
Leave the fast freeze function activated for the next 24 hours.
5.
When freezing is complete, turn both knobs (1), (2) back to their recommended positions.
5019 637 01040
