GB
A. “Door open” indication
This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:
B. “Service” indication
C. “Water tap closed” indication
D. “Clean filter” indication
PROGRAMME CHART
C
D
G
A
B
H
E. Programme selector
F. “Start (Pause)” button
G. Programme sequence indicator
H. “Reset” button
E F
Programme
Care
Labels
Max.
Load
Type of wash / Notes
- respect the manufacturer's recommendations on the care label
Cotton with prewash
95 °C
Cotton
40 - 60 - 95 °C
Synthetics with prewash
60 °C
Synthetics
30 - 40 - 60 °C
Delicates
30 °C
Quick wash
30 °C
Wool
Cold - 40 °C
Handwash
30 - 40 °C
Rinse & Spin
Spin
Cotone
95 °C
Cotone
40 - 60 - 95 °C
Sintetici
60 °C
Sintetici
30 - 40 - 60 °C
Delicati
30 °C
Rapido
30 °C
Lana
Freddo - 40 °C
Lavaggio a mano
30 - 40 °C
Risciacquo &
Centrifuga
Centrifuga
–
– kg
5.0
5.0
2.5
2.5
1.5
3.0
1.0
Heavily soiled, long wearing and temperature stable textiles in cotton and linen (bed linen, table linen, underwear, shirts etc.).
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.
Heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide
(Perlon, Nylon) or blends with cotton.
1.0
Textiles made of linen, silk, wool and viscose marked as “handwashable”.
5.0
5.0
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide
(Perlon, Nylon) or blends with cotton.
Curtains and delicate clothing, dresses, skirts, shirts and blouses.
Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton.
Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.
Same as the last rinse and the final spin in the “Cotton” programme.
In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.
Gentle Spin
Drain
Centrifuga breve
Scarico acqua
–
–
1.0
In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.
–
Water is drained only without any spinning. Alternative method of terminating programme after
“Rinse Hold”.
1)
:
2) option / Yes : dosing required
Do not use liquid detergent in the main wash.
For improved garment care spin speed is restricted in this programme.
Detergents and Additives
Pre- wash
Main
Wash
Special options
Softener No spin Rinse hold
Esclusione centrifuga
Anti piega
Yes
–
Yes
–
–
–
–
–
–
–
–
–
Yes 1)
Yes
Yes 1)
Yes
Yes
Yes
Yes
Yes
–
–
–
–
–
–
–
–
–
–
–
Spin
Speed rpm max.
max.
max.
max.
max.
max.
max.
400 2) max.
max.
max.
–
Ignis is a registered trademark of Whirlpool Europe S.r.l.
5019 501 01006
CONSUMPTION DATA
Programme
Cotton
Cotton **
Cotton
Synthetics
Synthetics
Delicates
Quick wash
Wool
Handwash
Handwash
Temperature
(°C)
95
60
40
60
40
30
30
40
40
30
Load
(kg)
5.0
5.0
5.0
2.5
2.5
1.5
3.0
1.0
1.0
1.0
Water
55
45
45
45
50
40
(l)
49 *
44
44
50 *
Energy
(kWh)
1.90
0.95
0.60
0.70
0.55
0.50
0.40
0.60
0.60
0.50
Approx. Programme
Duration
(hours : minutes)
2:00
2:20
2:00
1:30
1:15
0:45
0:30
0:45
0:40
0:40
Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
* To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
** Reference Programme for Energy Label.
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
Add detergents as indicated on the front page and as described in your Instructions for Use. Close the door and turn the programme selector to the desired programme and temperature. The indication lamp next to the “Start/Pause” button blinks.
SELECT ANY DESIRED OPTION
Push the button(s) of any option(s) desired - the respective indication lamp lights up.
When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.
“No spin” button
• Especially for delicate garments to avoid wear
and tear caused by the spin.
Note: with the “Cotton” and “Synthetics”
programmes, a short spin cycle is provided in
any case, even if the “No spin” option has been
selected, in order to optimize rinsing results.
“Rinse hold” button
• The laundry remains in the last rinse water
without progressing to the final spin cycle to
avoid creasing and prevent colours from
changing.
• This option is particularly recommended for
the programmes “Synthetics” and “Delicates”.
• This function is particularly useful if you want
to postpone spinning to a later time, or if you
want to drain only.
• If you select “Rinse hold” do not leave items to
soak for too long.
Note: The programme stops to “Rinse hold”
at the time the “Rinse hold” light in the
programme sequence indicator is on.
The indication lamp next to the “Start/Pause”
button flashes.
Terminate the “Rinse hold” option:
• Press the “Start/Pause” button; the
programme will terminate automatically with
the final spin cycle for the present wash
programme.
• If you do not wish to spin the clothes, turn the
programme selector knob to the “Drain”
programme and press the “Start/Pause”
button.
PROGRAMME START
Open the tap and press the “Start/Pause” button. The indication lamp next to the “Start/
Pause” button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash,
Rinse, Spin/Drain.
When the programme phrase is finised, the corresponding indication goes out.
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the lamp lights to show the the door can be opened.
As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel
(Reset) a running programme before the end”.
RED INDICATIONS
“Service”
Lighting up of the “Service” indication can be caused by a fault in an electrical component.
Refer to the “Troubleshooting Guide” in your
“Instructions for Use”; if the fault persists, contact our After Sales Service.
“Water tap closed”
The appliance has no or insufficient water supply.
Open the water tap: if the indications still lights up, refer to the “Troubleshooting Guide” in the
Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned: in the latter case refer to the Instructions for Use (“Removing the Filter”).
PROGRAMME END
• All the lights of the programme sequence
indicator are off, and the “Door open”
indication lights up.
1. Turn the programme selector to the “Off/O”
position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OP-
TIONS AFTER PROGRAMME START
1. Press the “Start/Pause” button to pause the
programme. The light blinks.
2. Select the new programme (with temperature),
any options and another spin speed if you want.
3. Press the “Start/Pause” button again.
The new programme continues at the same
position where the previous programme was
interrupted.
Do not add detergent for this programme.
CANCEL (RESET) A RUNNING PRO-
GRAMME BEFORE THE END
The “Reset” button cancels a programme before the end.
• Press the “Reset” button for at least 3
seconds. Any existing water is drained out
before the door can be opened.
Ignis is a registered trademark of Whirlpool Europe S.r.l.
5019 501 01006
