EN PROGRAMME CHART
A. “Door open” indication
This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
J G
C
D
Programme
WHITE
95 °C
COTTON
CO INTELLIGENT
40 - 60 °C
MINI LOAD
30 °C
SYNTHETICS
40 - 60 °C
BLACK
30
DELICATES
30 - 40 °C
MIX MAGIC
40 °C
BIANCHI
95 °C
COTONE
CO INTELLIGENT
40 - 60 °C
MINI BUCATO
30 °C
SINTETICI
40 - 60 °C
NERI
30
DELICATI
30 - 40 °C
MAGIC MISTI
40 °C
Care
Labels i
–
Yes
Yes
20° i i
H i
–
–
–
–
–
A
B
I i i
E. Programme selector
F. “Start/Pause” button
G. Spin speed selector
H. Programme sequence indicator
I. “Reset” button
J. “Start delay” button
E F
Max.
Load kg
6.0
6.0
1.0
3.0
Type of wash / Notes
- respect the manufacturer's recommendations on the care label
Normally to heavily soiled and robust white cotton laundry. In case of heavy soiling or stains, you can add an oxygenbased bleach additive which can be used at 95°C.
This programme eliminates bacteria, ensuring sanitization of your laundry.
Normally to heavily soiled and robust laundry made of cotton and linen.
Automatically adapts programme duration and water consumption to the load size and thus allows economical washing of even small loads.
Cotton and/or synthetics laundry made of stable fabric types.
Ideal programme to wash a small load of lightly to normally soiled laundry in an economic way. Pre-treatment of stains recommended. Not appropriate for very delicate laundry.
Detergents and Additives
Pre- wash
Main
Wash
Softener Pre-
PRELA-
VAGGIO
Rapid
TURBO
Clean+
Special options
CLEAN+ A
FREDDO
RISCIACQUO
INTENSIVO
STIRO
FACILE
Spin
SILEN-
ZIO
CENTRI-
FUGA
Start delay
AVVIO
RITAR-
DATO i i
–
Yes
Yes
Yes i i i i i
–
– i
– i i
–
– i i i i i i i
– i i i i i i i i i i Yes i i i – – i i i i i
3.0
Normally soiled garments made of artificial fibres (like polyester, polyacryl, viscose etc.) or their blends with cotton.
i Yes i i i – i i i i i i
– i
– i i i i i i i
Max
Spin
Speed rpm
Max.
Max.
Max.
Max.
Max.
Max.
Max.
ANTI SMOG
30 °C
WOOL/
HANDWASH
Cold - 40 °C
COTTON
40°
60°
ANTI SMOG
30 °C
LANA/A MANO
Freddo - 40 °C
COTONE
40°
60°
Rinse & Spin
Spin
Drain
–
–
–
1.5
Curtains and delicate clothing, dresses, skirts, shirts and blouses.
3.0
3.0
1.0
6.0
Lightly to normally soiled robust laundry made of cotton, linen, artificial fibres and their blends. Effective one-hour programme. Make sure to wash only similar colours together in one wash load .
Briefly worn clothing made of cotton, artificial fibers and blends with cotton.
Refresh programme to remove airborne dust and to make your clothes smell fresh again.
Use lowest recommended detergent amount.
Woollens, labelled with the Woolmark and identified as machine washable, as well as textiles made of silk (keep to care label!), linen, wool and viscose marked as handwashable.
Normally soiled cotton laundry. At 40°C and 60°C standard cotton programme and most favourable programme in terms of combined water and energy consumption for washing cotton laundry. - Reference programme for the Energy Label.
6.0
Same as the last rinse and the final spin in the “Cotton” programme.
6.0
Intensive spin. Same as the spin cycle in the “Cotton” programme.
–
Drain only - no spinning. Alternative method of terminating programme after “Rinse hold”.
–
–
–
–
–
–
Yes
Yes
Yes
–
–
– i i i i
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
– i
– i
–
–
–
–
– i i
–
–
–
–
–
–
–
– i i i i
–
– i i i i i
– i i i i i i
Max.
Max.
Max.
Max.
Max.
– i : option / Yes : dosing required
Ignis is a registered trademark of Whirlpool USA.
5019 550 00209
CONSUMPTION DATA Power consumption in off-mode 0,16 W / in left-on mode 0,16 W
Programme
Temperature
(°C)
Load
(kg)
Water
(l)
Energy
(kWh) without “Rapid”
Approx. programme duration
(hours : minutes)
WHITE
COTTON
COTTON
MINI LOAD
SYNTHETICS
SYNTHETICS
DELICATES
DELICATES
MIX MAGIC
ANTI SMOG
WOOL/ HANDWASH
WOOL/ HANDWASH
COTTON 60° *
COTTON 60° *
COTTON 40° *
95
60
40
30
60
40
40
30
40
30
40
Cold
60
60
40
6.0
6.0
6.0
1.0
3.0
3.0
1.5
1.5
3.0
3.0
1.0
1.0
6.0
3.0
3.0
55**
46
52
22
46**
42
60
60
45
40
45
45
48
31
31
1.90
1.02
0.65
0.20
0.90
0.50
0.60
0.40
0.45
0.25
0.50
0.10
0.81
0.72
0.61
without “Rapid”
2:00
2:30
2:00
0:45
1:35
1:20
0:50
0:46
1:00
0:30
0:40
0:35
4:00
2:30 ***
2:30 *** with “Rapid”
-
1:35
1:15
-
1:14
0:59
-
-
-
-
-
-
-
-
-
%
68
44
68
62
Consumption values were measured in normalized conditions, in compliance with IEC/EN 60456. In the home, they may vary depending on the individual water supply pressure and temperature, the load and the type of wash. The consumption data indicated are based on an inlet water temperature of approx. 15°C through the cold fill valve as well as the hot fill valve (if available). If your washing machine has a hot fill valve, connection of this valve to hot water supply will lower the energy consumption by reduced heating times, depending on the individual hot fill inlet water temperature. Water and energy consumptions refer to the default setting of the programmes, with temperature and load as indicated in the table; selecting any options or changing the spin speed will also change the consumption data.
The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also “Troubleshooting
Guide” in your Instructions for Use).
Approximate remaining moisture content (%). After programme and spinning with maximum selectable spin speed, in default programme setting.
* Reference programmes for Energy Label. For reasons of energy saving, the real water temperature may deviate from the declared cycle temperature.
** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
*** Automatic adaptation of programme duration after detection of wash load
LOAD LAUNDRY, ADD DETERGENTS
AND SELECT THE PROGRAMME
Load the laundry, close the door and add detergents as indicated on the front page and as described in the chapter
“Detergent and Additives” in your Instructions for Use.
Turn the programme selector to the desired programme and temperature. The display shows the programme duration and the predefined spin speed. The indication lamp next to the “ Start/Pause ” button blinks.
If you do not start the programme soon after having made your choice, the washing machine will switch off automatically after about a quarter of an hour. Switch on the washing machine again by turning the programme selector back to “O” and then to the desired programme.
SELECT ANY DESIRED OPTION
Push the button of any option desired - the respective indication lamp lights up. If the combination of programme and additional option(s) is not possible, the indication lights switch off automatically.
“Prewash” button
• Adds a prewash cycle to the wash programme selected;
prolongs the programme by about a quarter of an hour.
• Recommended for heavily soiled laundry (e.g. with sand
or granular dirt).
• Do not use liquid detergent for the main wash when
activating the “Prewash” option.
“Rapid” button
• Enables quicker washing by shortening the
programme duration.
• Recommendable for only lightly soiled laundry.
• Not selectable for Cotton 95°C.
“Clean+” button
• Choose this option if you use an in-wash additive for
stain removal (powder, for example “Vanish”) - it will
optimize the additive’s efficiency to get better wash
performance and stain removal.
• Use with the maximum load.
• Add an appropriate amount of in-wash additive for
stain removal (powder) to the main wash chamber,
together with your detergent (only use powder
detergent with this option). Respect the
manufacturer’s dosing instructions.
• May prolong the programme by up to 15 minutes
• Appropriate for use of stain removers and bleaches
on oxygen basis. Chlorine or perborate bleaches
must not be used!
“Cold wash” button
• Saves energy used for water heating while maintaining
good wash result.
• Recommendable for lightly soiled laundry without
stains.
• Make sure that your detergent is suitable for cold
wash temperatures (15 or 20 °C).
• Mainly selectable on the lowest temperature step of
the programmes.
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with very
soft water, washing baby linen and helps people with
allergies.
“Easy ironing” button
• Reduces creasing by an increased water quantity and
a very gentle spin.
“Silence” button
• Press the button if you want to avoid the sund of
spinning - the laundry will remain in the last rinse
water, without progressing to the final spin cycle.
• Also useful to avoid creasing of your laundry if you
cannot unload it right after programme end.
• The programme stops when “Silence” indication
blinks; the “ Start/Pause ” indicator also blinks.
• To terminate the programme:
- by spinning the laundry: press “ Start/Pause ”; the
laundry will be spun with the default spin speed of the
programme selected
- by draining the rinse water: turn the programme
selector to the “Drain” programme and press “ Start/
Pause ” to start the draining.
• Do not leave the laundry to soak in the rinse water for
too long (wspecially silk!).
“Spin” button
• Every programme has a predefined spin speed.
• Press the button to set different spin speed.
• If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain during
rinse. The water is drained out only.
START DELAY
The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating “Start delay” option.
• Select programme, temperature and options.
• Press the “Start delay” button to select the desired
delay time up to 23 hours.
• Press the “ Start/Pause ” button.
On the display, the start delay symbol and the dot
between hours and minutes blink. The countdown of
the delay time begins.
• The time delay indication disappears when the
programme starts and it is replaced by the remaining
programme time.
• Once having pressed the “ Start/Pause ” button,
the delay time can be reduced by pressing again the
“Start delay” button.
To cancel the “Start delay”
...before you press the “Start/Pause” button:
• Turn the programme selector to another position or
press the “ Reset ” button.
...after having pressed the “Start/Pause” button:
• Press the “ Start/Pause ” button - the start delay time
disappears from the time display.
PROGRAMME START
Open the tap and press the “ Start/Pause ” button.
The indication lamp next to the “ Start/Pause ” button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain.
When the laundry load is detected or the programme duration is updated, the display shows an animation.
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the lamp lights to show the the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open.
In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.
FAILURE INDICATIONS
In case of any failures or irregularities, consult the
“Troubleshooting Guide” in your Instructions for Use.
“ Water tap closed ”: no or not sufficient inlet
water.
” Service ”: failure or malfunction of an electrical
component.
” Clean pump ”: waste water is not pumped out.
Spin speed on display blinks : unbalance during spinning.
PROGRAMME END
The “Door open” indicator lights up, and the display shows
“End”. After about a quarter of an hour, the washing machine will switch off completely to save energy.
1. Turn the programme selector to the “O” position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the “ Start/Pause ” button to pause the
programme. The light blinks.
2. Select the new programme, any options and another
spin speed if you want.
3. Press the “ Start/Pause ” button again.
The new programme continues at the same position
where the previous programme was interrupted.
Do not add detergent for this programme.
CANCEL (RESET) A RUNNING PROGRAMME
BEFORE THE END
The “Reset” button cancels a programme before the end.
• Press and hold the “ Reset ” button for a few seconds.
Any existing water is drained out. It may last
some time until the door can be opened.
Ignis is a registered trademark of Whirlpool USA.
5019 550 00209
