A. “Door open” indication
This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
Programme
Cotton
95 °C
Cotton
40 - 60 °C
Jeans
40 °C
Synthetics
30 - 40 - 60 °C
Delicates
30 - 40 °C
Daily load
40 °C
Quick wash 30´
30 °C
Wool/
Handwash cold - 40 °C
Cotton
40 - 60 °C
BAWEŁNIANE
95 °C
BAWEŁNIANE
40 - 60 °C
JEANS
40 °C
SYNTETYCZNE
30 - 40 - 60 °C
DELIKATNE
30 - 40 °C
40 °C
PROGRAM
SZYBKI 30´
30 °C
WEŁNIANE/
RÊCZNE zimna - 40 °C
BAWEŁNA
40 - 60 °C
Rinse & Spin
Spin
Drain i : option / Yes : dosing required
Care
Labels
–
–
–
G
J
C
D
H
E F
A
B
I
E. Programme selector
F. “Start /Pause” button
G. Spin speed selector
H. Programme sequence indicator and Start delay indication
I. “Reset” button
J. “Start delay” button
Acustic noise level :
Washing - 59 dB(A) / 1 pW
Spinning - 1200 rpm 75 dB(A) / 1 pW
- 1000 rpm 74 dB(A) / 1 pW
Max.
Load kg
Type of wash / Notes
- Respect the manufacturer's recommendations on the care label
6.0
6.0
5.0
3.0
Normally to heavily soiled and robust white cotton laundry. In case of heavy soiling or stains, you can add an oxygenbased bleach additive which can be used at 95°C.
This programme eliminates bacteria, ensuring sanitization of your laundry.
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.
Normally soiled cotton jeanswear and garments made of jeanslike material such as trousers and jackets.
Normally soiled garments made of artificial fibres (like polyester, polyacryl, viscose etc.) or their blends with cotton.
1.5
Curtains and delicate clothing, dresses, skirts, shirts and blouses.
3.0
3.0
Slightly to normally soiled robust laundry made of cotton, linen, artificial fibres and their blends. Effective one-hour programme. Make sure to wash only similar colours together in one wash load .
Shortly worn clothing made of cotton, polyester, polyamide and blends with cotton.
Brief 30-minutes programme to refresh your laundry.
1.0
Textiles made of wool, linen, viscose or silk (respect care label!) marked as handwashable or machine-washable.
6.0
Normally soiled cotton laundry. At 40°C and 60°C standard cotton programme and most favourable programme in terms of combined water and energy consumption for washing cotton laundry. - Reference programme for the Energy Label.
6.0
Same as the last rinse and the final spin in the “Cotton” programme.
6.0
–
In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.
Drain only - no spinning. Alternative method of terminating programme after “Rinse hold”.
Detergents and Additives
Pre- wash
Main
Wash
Softener Start delay
OPÓŹ-
NIENIE
STARTU
Rapid
SZYBKI
Special options
Prewash Cold wash
PRANIE
WSTÊPNE
PRANIE
NA ZIMNO
Rinse hold
STOP
P£UKANIE
Spin
WIRO-
WANIE
Max
Spin
Speed rpm i i i i i
–
–
–
–
–
–
–
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
–
–
– i i i i i i i i i i
–
– i i i i i i i i i i i i
– i i i
–
–
–
–
–
–
–
– i i i i i
–
–
–
–
–
–
–
– i i i i i i
– i
–
–
– i i i i i i i i i i
–
– i i i i i i i i i i i
–
Max.
Max.
Max.
Max.
1000
1)
Max.
Max.
1000
1)
Max.
Max.
Max.
–
5019 550 00013
CONSUMPTION DATA Power consumption in off-mode 0.16 W / in left-on mode 0.16 W
Programme
Cotton
Cotton
Cotton
Jeans
Synthetics
Synthetics
Delicate
Delicate
Daily load
Quick wash 30´
Wool/ Handwash
Wool/ Handwash
Cotton *
Cotton *
Cotton *
Temperature
(°C)
95
60
40
40
60
40
40
30
40
30
40 cold
60
60
40
Load
(kg)
6.0
6.0
6.0
5.0
3.0
3.0
1.5
1.5
3.0
3.0
1.0
1.0
6.0
3.0
3.0
Water
(l)
59**
49
54
69
50**
46
50
50
45
40
45
45
49
37
37
Energy
(kWh) without “Rapid”
1.90
1.02
0.65
0.63
0.70
0.50
0.65
0.50
0.45
0.30
0.60
0.10
0.78
0.69
0.58
Approx. programme duration
(hours : minutes) without
“Rapid”
2:00
2:30 with “Rapid”
-
1:35
2:00
2:15
1:35
1:20
0:50
0:46
1:00
0:30
0:40
0:35
4:00
2:20 ***
2:30 ***
1:15
1:30
1:14
0:59
-
-
-
-
-
-
-
-
-
Consumption values were measured in normalized conditions, in compliance with IEC/EN 60456. In the home, they may vary depending on the individual water supply pressure and temperature, the load and the type of wash. The consumption data indicated are based on an inlet water temperature of approx.
15°C through the cold fill valve as well as the hot fill valve (if available). If your washing machine has a hot fill valve, connection of this valve to hot water supply will lower the energy consumption by reduced heating times, depending on the individual hot fill inlet water temperature. Water and energy consumptions refer to the default setting of the programmes, with temperature and load as indicated in the table; selecting any options or changing the spin speed will also change the consumption data.
The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also
“Troubleshooting Guide” in your Instructions for Use).
* Reference programmes for Energy Label. For reasons of energy saving, the real water temperature may deviate from the declared cycle temperature.
** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
*** Automatic adaptation of programme duration after detection of wash load
LOAD LAUNDRY, ADD DETERGENTS
AND SELECT THE PROGRAMME
Load the laundry, close the door and add detergents as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use. Turn the programme selector to the desired programme and temperature. The indication lamp next to “ Start/Pause ” button blinks.
If you do not start the programme soon after having made your choice, the washing machine will switch off automatically after about a quarter of an hour. To switch the washing machine on again, turn the programme selector to “Off/O” and afterwards to the desired programme again.
SELECT ANY DESIRED OPTION
Push the button of any option desired - the respective indication lamp lights up. If the combination of programme and additional option(s) is not possible, the indication lights switch off automatically.
“Prewash” button
• Adds a prewash cycle to the wash programme
selected; prolongs the programme by about a
quarter of an hour.
• Recommended for heavily soiled laundry (e.g. with
sand or granular dirt).
• Do not use liquid detergent for the main wash
when activating the “Prewash” option.
“Cold wash” button
• Saves energy used for water heating while maintaining
good wash result.
• Recommendable for lightly soiled laundry without
stains.
• Make sure that your detergent is suitable for cold
wash temperatures (15 or 20 °C).
• Mainly selectable on the lowest temperature step of
the programmes
“Rinse hold” button
• The laundry remains in the last rinse water
without pregressing to the final spin cycle to avoid
creasing and prevent colours from changing.
• It is particularly useful if you want to postpone
spinning to a later time, or if you want to drain only.
• The programme stops to “Rinse hold” at the time
the “Rinse hold” lights in the preogramme
sequence indication is on. The indication lamp next
to the “Start/Pause” button blinks.
Terminate the “Rinse hold” option:
• Press the “Start/Pause” button; the programme
will terminate automatically with the final spin
cycle for the present wash programme.
• If you do not wish to spin the clothes, turn the
programme selector to the “Drain” programme
and press the “Start/Pause” button.
“Spin” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain
during rinse. The water is drained out only.
“Rapid” button
• Enables quicker washing by shortening the
programme duration.
• Recommendable for only lightly soiled laundry.
• Not selectable for Cotton 95°C.
START DELAY
The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating “Start delay” option.
• Select programme, temperature and options.
• Press the “Start delay” button to select the delay
time by 1, 3, 6, 9 or 12 hours.
• Press the “Start/Pause” button.
The indication next to the “Start delay” button blinks
and the countdown of the delay time begins.
• The time delay indication disappears when the
programme starts and it is replaced by the
programme sequence indication.
• Once having pressed the “ Start(Pause) ” button,
the delay time can be reduced by pressing again
the “Start delay” button.
To cancel the “Start delay”
..before you press the “Start/Pause” button:
• Turn the programme selector to another position
or press the “Reset” button.
..after having pressed the “Start/Pause” button:
• Press the “ Start(Pause) ” button - the light of the
selected start delay goes off.
PROGRAMME START
Open the tap and press the “Start/Pause” button.
The indication lamp next to the “Start/Pause” button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Drain/Spin.
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the lamp lights to show the the door can be opened.
As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset)” a running programme before the end”.
FAILURE INDICATIONS
In case of any failures or irregularities, consult the
“Troubleshooting Guide” in your Instructions for Use.
“ Water tap closed ”: no or not sufficient inlet
water.
” Service ”: failure or malfunction of an electrical component.
” Clean pump ”: waste water is not pumped out.
Spin speed indication blinks : unbalance during spinning.
PROGRAMME END
The “Door open” indicator lights up. After about a quarter of an hour, the washing machine will switch off completely to save energy.
1. Turn the programme selector to the “Off/O” position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the “Start/Pause” button to pause the
programme. The light blinks.
2. Select the new programme, any options and another
spin speed if you want.
3. Press the “Start/Pause” button again. The new
programme continues at the same position where the
previous programme was interrupted.
Do not add detergent for this programme.
CANCEL (RESET) A RUNNING PROGRAMME
BEFORE THE END
The “Reset” button cancels a programme before the end.
• Press and hold the “ Reset ” button for a few
seconds. Any existing water is drained out. It may
last some time until the door can be opened.
5019 550 00013
