Belkin PM01629 Quick Start Manual

Belkin PM01629 is a Conserve Energy-Saving Surge Protector with Remote Switch. It has two types of outlets: "Always On" and "Remote Switched". "Always On" outlets are for devices that need continuous power, such as digital video recorders, cordless phones, alarm clocks, and wireless routers. "Remote Switched" outlets are for devices that do not need constant power or go into standby mode, such as printers, chargers, DVD players, computer monitors, televisions, and stereo systems.

The remote switch allows you to turn off the power to the "Remote Switched" outlets when you're not using them, which can save energy. To turn off the power, simply press the "O" button on the remote switch. To turn the power back on, press the "|" button.

PDF

Dokumentas

Reklama

Wireless

Router

Cordless

Phone

Cordless

Phone

Computer

Monitor

Printer

Printers

Printer

Scanner

Step 1:

Plug equipment into “Always On” outlets.

These outlets are for devices that need continuous power, such as:

• Digital video recorders

• Cordless phones

• Alarm clocks

• Wireless routers

Wireless

Router

Computer

Cordless

Phone

Monitor Monitor

Printer

Step 2:

Scanner

These outlets are controlled by the remote switch and are for devices that do not need constant power or go into standby mode, such as:

• Printers

• Chargers

• DVD players

• Computer monitors

• Televisions

• Stereo systems

Step 3:

Plug Conserve power cord into the wall outlet.

Step 4:

Remove the remote switch and wall-mount from the box.

Mounting screws are not included; see User Guide for wall-mount installation.

Step 5:

Pull and remove the clear battery tab from the back of the remote switch.

Remove before using.

Pull

Step 6:

Firmly press and release the “|” button to turn ON the “Remote Switched” outlets.

Check to see if a green light flashes on the remote switch. This will indicate that the remote is working.

6 I = ON

O = OFF

Step 7:

Your equipment is now powered, surge-protected, and ready for use.

Step 8:

When finished using your equipment, turn off each device as you normally would.

HOW TO USE THE

CONSERVE REMOTE SWITCH

Step 9:

When your equipment is off, firmly press and release the “O” button on the remote switch.

Check to see if a green light flashes on the remote switch. This will indicate that you have eliminated standby power to Conserve’s

“Remote Switched” outlets. Devices plugged into the “Always On” outlets will remain powered.

I = ON

9 O = OFF

Step 10:

When ready to use your equipment again, firmly press and release the “|” button on the remote switch to activate the power to the “Remote

Switched” outlets.

Step 11:

Turn on and use your equipment as normal.

Repeat Step 8 when done.

For complete instructions, see the User Guide enclosed or visit www.belkin.com/conserve.

Sveiki! Aš esu AI pokalbių robotas, specialiai apmokytas padėti jums su Belkin PM01629 Quick Start Manual. Aš kruopščiai peržiūrėjau dokumentą ir galiu padėti jums rasti tikslią reikiamą informaciją arba paaiškinti turinį aiškiais ir paprastais terminais. Nesvarbu, ar ieškote patarimų dėl konkrečių funkcijų, trikčių šalinimo veiksmų ar bendro naudojimo, nedvejodami užduokite savo klausimus. Kuo daugiau informacijos pateiksite apie savo rūpesčius ar poreikius, tuo tiksliau ir efektyviau galėsiu jums padėti!