Hard Reset ECOVACS DEEBOT OZMO U2

If your ECOVACS DEEBOT OZMO U2 often stops cleaning or can't return to the charging station try to Hard Reset it according to our instructions. Learn how to restore defaults on ECOVACS DEEBOT OZMO U2. This is the best method to restore settings on ECOVACS DEEBOT OZMO U2. How to reconnect Wi-Fi on ECOVACS DEEBOT OZMO U2.

First method:

1. To start your ECOVACS DEEBOT OZMO U2 needs to be properly turned on by setting Power Switch to I position.

2. Find the Reset Button beside the Power Button.

3. Click and hold ECOVACS vacuum Reset Key for 3 seconds, you will need to use a toothpick or of ce clip to do that.

4. Short sounds will be played and Wi-Fi led indicator will start blinking.

5. Close the cover and give DEEBOT OZMO U2 robot some time to reboot.

6. Good Job! Now all ECOVACS DEEBOT OZMO U2 settings are set to its defaults.