advertisement
UC-C100-Z-WM and UC-C100-Z-L-WM Quick Start
Crestron Flex Video Conference System Integrator Kit with a Wall Mounted Control Interface for Zoom
Rooms™ Software
The UC-C100-Z-WM and UC-C100-Z-L-WM Crestron Flex integrator kits provide customizable video conference solutions for use with Zoom
Rooms™ software. They support single or dual video displays and feature a wall mount touch screen and a UC bracket assembly.
The latest firmware must be loaded onto the touch screen prior to operation. Refer to the touch screen's product page (resources tab) to download the latest device firmware. The latest UC-C100-Z-WM and
UC-C100-Z-L-WM firmware is installed using the auto update feature.
Minimum Requirements:
l
A certified USB Camera
l
A certified, AEC-enabled USB speakerphone or DSP device
l
A video display (not included) connected to the UC Engine. A second display is optional.
l
A Zoom Rooms account or activation code
2
2
1
2
1
2
1
1
1
4
Anchor, Drywall, Plastic, 3/8 in. x 1/2 in. (9.5 mm x
12.7 mm) (2052565)
EDID passthrough (2055728)*
Key, Anchor (4529654)
Screw, 8-AB x 1-1/2 in. (38.1 mm), Pan Head, Combo
(2052567)
Tie Wrap (2047935)
Additional Items
PoE injector (6502429)
Cable, CAT5e, RJ-45 - RJ-45, 7 ft (2.1 m) (6509924)
Cable, DisplayPort™ to HDMI, 6 ft (1.8 m) (6508282)
Cable, HDMI, 20 ft (6.1 m) (6503567)
Cable, HDMI, 6 ft (1.8 m) (6503565)
*EDID passthroughs are not included in the UC-C100-Z-L-WM system.
1
1
In the Box
Wall Mount Touch Screen
10.1 in. Wall Mount Touch Screen (6510814)
Mounting hardware
UC Bracket Assembly
UC Bracket Assembly with UC Engine and HDMI® content ingest (UC-BRKT-200-S-Z-ASSY, 6511479 or
UC-BRKT-200-S-Z-L-ASSY, 6512031)
1
UC-C100-Z-WM and UC-C100-Z-L-WM Quick Start
Crestron Flex Video Conference System Integrator Kit with a Wall Mounted Control Interface for Zoom
Rooms™ Software
Mount Devices
Mount the UC Bracket Assembly
Mount the UC Bracket Assembly to VESA® compliant display devices, a wall, or other building structure. Anchors and screws are supplied for installation on walls 3/8 in. (9.5 mm) to 3/4 in. (19 mm) thickness.
CAUTION: Preinstalled screws may protrude from the back of the UC
Bracket Assembly. Exercise caution when handling the UC Bracket
Assembly to avoid scratching or damaging surfaces.
NOTE: The integrated cable tie wraps are reusable. Avoid damaging the cable tie wraps.
Mount the Touch Screen
Mount the included touch screen according to the TSW-1070 Quick
Start (Doc. 8552).
2
UC-C100-Z-WM and UC-C100-Z-L-WM Quick Start
Crestron Flex Video Conference System Integrator Kit with a Wall Mounted Control Interface for Zoom
Rooms™ Software
Connect
Identify the UC Engine
The UC Engine is available in two models. Identify the model included with your Crestron Flex system. Tap or click the corresponding image below to navigate to the appropriate connection instructions.
ASUS® Mini PC (UC-C100-Z-WM)
Lenovo® M920Q ThinkSmart™ Edition Tiny (UC-C100-Z-L-WM)
3
UC-C100-Z-WM and UC-C100-Z-L-WM Quick Start
Crestron Flex Video Conference System Integrator Kit with a Wall Mounted Control Interface for Zoom
Rooms™ Software
System Overview (UC-C100-Z-WM)
for detailed connection instructions.
4
UC-C100-Z-WM and UC-C100-Z-L-WM Quick Start
Crestron Flex Video Conference System Integrator Kit with a Wall Mounted Control Interface for Zoom
Rooms™ Software
Make Connections (UC-C100-Z-WM)
1. Make UC Engine and touch screen connections as shown in the following illustration.
5
UC-C100-Z-WM and UC-C100-Z-L-WM Quick Start
Crestron Flex Video Conference System Integrator Kit with a Wall Mounted Control Interface for Zoom
Rooms™ Software
2. Connect a USB audio source (accessory) and displays to the UC Engine. Connect the EDID passthroughs to the displays.
6
UC-C100-Z-WM and UC-C100-Z-L-WM Quick Start
Crestron Flex Video Conference System Integrator Kit with a Wall Mounted Control Interface for Zoom
Rooms™ Software
3. Remove the screw from the connector cover (located below the UC Engine) using a Philips #1 screwdriver (not included). Open the connector cover and retain the screw.
4. Connect a camera (not included) to the UC Engine as shown in the image below. Do not connect the camera to any of the other USB ports.
7
UC-C100-Z-WM and UC-C100-Z-L-WM Quick Start
Crestron Flex Video Conference System Integrator Kit with a Wall Mounted Control Interface for Zoom
Rooms™ Software
5. Reattach the connector cover using the screw removed in step 3.
6. Connect a laptop to the content ingest device (HD-CONV-USB-200).
7. Bundle the cables to the bracket assembly with the integrated cable tie wraps. The cable tie wraps are reusable.
8
UC-C100-Z-WM and UC-C100-Z-L-WM Quick Start
Crestron Flex Video Conference System Integrator Kit with a Wall Mounted Control Interface for Zoom
Rooms™ Software
System Overview (UC-C100-Z-L-WM)
for detailed connection instructions.
9
UC-C100-Z-WM and UC-C100-Z-L-WM Quick Start
Crestron Flex Video Conference System Integrator Kit with a Wall Mounted Control Interface for Zoom
Rooms™ Software
Make Connections (UC-C100-Z-L-WM)
1. Make touch screen network connections.
10
UC-C100-Z-WM and UC-C100-Z-L-WM Quick Start
Crestron Flex Video Conference System Integrator Kit with a Wall Mounted Control Interface for Zoom
Rooms™ Software
2. Make USB audio (accessory) and network connections to the top of the UC Engine. Connect the bracket assembly's integrated power supply to an AC power outlet.
11
UC-C100-Z-WM and UC-C100-Z-L-WM Quick Start
Crestron Flex Video Conference System Integrator Kit with a Wall Mounted Control Interface for Zoom
Rooms™ Software
3. Connect displays to the UC Engine.
12
UC-C100-Z-WM and UC-C100-Z-L-WM Quick Start
Crestron Flex Video Conference System Integrator Kit with a Wall Mounted Control Interface for Zoom
Rooms™ Software
4. Connect a laptop to the content ingest device (HD-CONV-USB-200).
5. Bundle the cables to the bracket assembly with the integrated cable tie wraps. The cable tie wraps are reusable.
13
UC-C100-Z-WM and UC-C100-Z-L-WM Quick Start
Crestron Flex Video Conference System Integrator Kit with a Wall Mounted Control Interface for Zoom
Rooms™ Software
Configure
Apply Power
Press the power button on the bottom of the UC Engine and apply power to all of the other devices in the system.
Log In to the Zoom Rooms Service
1. Tap Touch Here to Enable a Specific Application on the bottom of the screen. A list of applications is displayed.
2. Tap Zoom Rooms and then tap Confirm. The touch screen will reboot.
3. Enter the pairing code shown on the display to pair the touch screen with the UC Engine. The Zoom Rooms controller app is displayed.
4. Log in to the Zoom Rooms service with an activation code or Zoom
Rooms Credentials (email and password).
l
Activation Code:
a. Tap Enter Activation Code.
b. Enter the 16-digit activation code provided by the administrator to activate the Zoom Room that is assigned to the activation code. The Zoom Rooms Conference Room screen is shown on the display.
l
Sign In:
a. Tap Sign In.
b. Enter the Zoom Room credentials and tap Sign In.
c. Select the conference room name from the list and tap Next.
The Zoom Rooms Conference Room screen is shown on the display.
5. Tap Settings. If a password is required, enter the password (the default password is "1234"). The Settings screen is displayed.
6. Tap Microphone and select the as the source.
7. Tap Speaker and select the as the source.
8. Tap Meet Now to exit.
Configure the System
Connect a USB keyboard and mouse (sold separately) to a USB port on the UC Engine to configure system features. For detailed information on using Zoom Rooms, refer to the Zoom Rooms Help Center .
14
UC-C100-Z-WM and UC-C100-Z-L-WM Quick Start
Crestron Flex Video Conference System Integrator Kit with a Wall Mounted Control Interface for Zoom
Rooms™ Software
Visit the Product Page
Scan the QR code to visit the product page.
UC-C100-Z-WM www.crestron.com/model/6511934
UC-C100-Z-L-WM www.crestron.com/model/6512193
Additional Information
Original Instructions
The U.S. English version of this document is the original instructions.
All other languages are a translation of the original instructions.
Crestron product development software is licensed to Crestron dealers and Crestron
Service Providers (CSPs) under a limited nonexclusive, nontransferable Software
Development Tools License Agreement. Crestron product operating system software is licensed to Crestron dealers, CSPs, and end-users under a separate End-User License
Agreement. Both of these Agreements can be found on the Crestron website at www.crestron.com/legal/software_license_agreement .
The product warranty can be found at www.crestron.com/warranty .
The specific patents that cover Crestron products are listed at www.crestron.com/legal/patents .
Certain Crestron products contain open source software. For specific information, visit www.crestron.com/opensource .
Crestron and the Crestron logo are either trademarks or registered trademarks of
Crestron Electronics, Inc. in the United States and/or other countries. ASUS is either a trademark or registered trademark of ASUSTeK Computer Inc. in the United States and/or other countries. HDMI is either a trademark or registered trademark of HDMI
Licensing LLC in the United States and/or other countries. Lenovo and ThinkSmart are either trademarks or registered trademarks of Lenovo in the United States and/or other countries. DisplayPort and VESA are either trademarks or registered trademarks of
Video Electronics Standards Association in the United States and/or other countries.
Zoom Rooms is either a trademark or registered trademark of Zoom Video
Communications, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography.
©2021 Crestron Electronics, Inc.
Doc. 8939B
06/09/21
15
advertisement