ATTACHING MOTION
Back out the accessory studs
ATTACHING MOTION
Place the motor on the drive shaft press down to compress the o-ring (if motor doesn’t drop in place, move the carriage slightly to align the shafts) Tighten the accessory studs to lock the motor in place
PLUG IN MOTOR
Align cable on the controller and plug in connector. For added security, fasten the retention screw to the controller
PREPARE FOR SHOOTING
Unlock carriage brake and you’re ready to start filming.
Note: Rhino Motion will not work if the brake is locked in place
POWER ON CONTROLLER
Press and hold the power button to turn on the Controller
BASIC FUNCTIONS
Push in the Controller wheel to select menu items and change values.
Use the back button to go back and exit menus
SELECT YOUR SLIDER
Choose the slider you are installing Rhino Motion on. Note: when changing sliders or rail lengths it is important to change your slider in settings
SELECT YOUR SLIDER
Choose the slider you are installing Rhino Motion on. Note: when changing sliders or rail lengths it is important to change your slider in settings
HOME
Live Motion, Time Lapse & Settings
LIVE MOTION
Select Turn Wheel to Slide or Create a Move
LIVE MOTION
Select Turn Wheel to Slide or Create a Move
CALIBRATE
Before entering modes, Rhino Motion will auto calibrate to set its end points
TURN WHEEL TO SLIDE
Turn wheel to adjust direction and speed. Press wheel in to stop
TURN WHEEL TO SLIDE
Turn wheel to adjust direction and speed. Press wheel in to stop
CREATE A MOVE
Program a move with in and out points, ramping, and looping
TIME LAPSE
Select Simple Time Lapse or Advanced Time Lapse (must use included cable)
TIME LAPSE
Select Simple Time Lapse or Advanced Time Lapse (must use included cable)
SIMPLE TIME LASPE
Choose your distance, direction, and duration
ADVANCED TIME LAPSE
Choose your exposure, duration, and playback time
ADVANCED TIME LAPSE
Choose your exposure, duration, and playback time
MOTOR DOCK
The Controller docks on the back of the motor for quick access
TRIPOD DOCK
The Controller also docks on the tripod for hands-free use
CHARGING
Using the included charger, Rhino Motion charges fully in about 3 hours. Under normal operation the battery will last about 7 hours. If you enable power saving mode in Settings, you can get up to 24 hours of battery in Advanced Time Lapse
TRIPOD DOCK
The Controller also docks on the tripod for hands-free use
CHARGING
Using the included charger, Rhino Motion charges fully in about 3 hours. Under normal operation the battery will last about 7 hours. If you enable power saving mode in Settings, you can get up to 24 hours of battery in Advanced Time Lapse
Thank You for purchasing Rhino Motion EVO.
If you have any questions or comments, please email: [email protected]
