Brief Guide

ver1.1

PN-L703B/L603B

Connect with computer and turn on power

1.

Connect with computer by USB cable.

Via computer cable

[Notice] You can connect from side.

2.

Connect with computer by Video cable.

④

⑤

⑥

①D-Sub input

②Display Port input

① ② ③

③HDMI input

④D-Sub input

⑤HDMI input

⑥HDMI input

3.

Turn on display main power.

4.

Press POWER button in left bottom.

POWER button / TOUCH MENU

5.

Turn on Computer power.

*You need to install “Touch panel setting tool”

and “SHARP Pen software” to computer.

6.

Change and select input I/F of this computer.

You can select by touching “TOUCH MENU” button.

7.

Touch input I/F of this computer.

Start up “White board”

1.

Double click “Pen Software” icon on desktop. *twice quickly.

2.

Then “White board” start up.

1

Draw character on “White board”

You can draw character by touching display

(White board area) with pen.

Bundled pen

●Change size and color of pen

1.

Touch the indicator (menu icon) .

2.

“Square menu” like following image appears.

3.

Touch “Pen１” icon.

4.

Set on the setting menu like following image.

・Please select the kind of pen (Standard pen

/Brush pen/Marker/Figure pen),

Color (Black/Red/Blue/Green/Yellow/White),

Size(１～５).

・When you finish setting, please touch “Close” icon.

5.

You can create size and color which you want .

・Touch “Custom” icon ,

Then you can set size and color.

Erase character

●Erase by bundled eraser

・You can erase by moving softly with bundled eraser.

Bundled eraser

●Change the size of eraser

1.

Double click “Eraser” icon on “Square menu”.

・If you have already selected “eraser”,

please touch “Eraser” icon again.

2.

Select the size and touch from following 4 images.

●Erase by bundled pen

・Touch “Eraser” icon on “Square menu”,

and then you can erase by touching (like

moving softly) the area which you want to

erase.

●Erase all item on sheet

1.

Double click “Eraser” icon on “Square menu”.

・If you have already selected “eraser”,

please touch “Eraser” icon again.

2.

Touch “Sheet clear” icon ,

then dialog box appears.

・Once you touch “Yes”, all item is cleared.

2

Add new sheet

・Touch “Add” icon on “Tool bar” in bottom ,

then you can add new sheet.

・Touch ”Page” icon ,

then you can move sheet, previous and next.

●Change sheet by dragging display

・Touch “View” icon on “Square menu”

and drag display to right or left (with keeping touch),

then you can change sheet.

Show sheet list of “White board”.

・Touch “Sheet list” icon on “Tool bar” in bottom, then you can see thumbnail each sheet.

・If you touch once, you can see up to 8 sheets’ thumbnails at the bottom of screen like following (a) image.

If you touch again, you can see max. 48 sheets’ thumbnails like following (b) image

and you can move to the sheet where you touch.

(a) (b)

Save the data

1.

Touch “Save” icon on “Square menu”.

2.

Select the save method.

・Save as a new file： ・Save to the same file：

・Save PDF： ・Save image：

*”Save as a new file” and “Save to the same file”,

it save as SWSX format and you can build again.

*”Save image”, it save as BMP/JPEG/PNG format

so you can not build again.

[Notice]

Format of “Save as image” is set by “sheet” tab on setting of “Tool bar” in bottom

3.

Select the file save location and touch “OK”.

4.

Touch “OK”.

[Notice]

When you want to change file name, software key board appear by touching file name space and then you can change it

3

Open saved data

1.

Touch “Open file” icon on “Square menu”.

2.

Select file opening method.

・New ： Create a new sheet

・Open as a new file ： Open data as a new file

・Add to the current sheet ： Add data to the current sheet

3.

Read the file.

・Select the saved location and touch “OK”.

4.

Select the file and touch “OK”.

Turn off power

1.

Shut down computer.

2.

Press POWER button in left bottom.

[Notice]

Status of Power LED

・Green lit : Power on

・Orange lit

・Green flashing

: Power off (Standby mode)

: Input signal standby mode

3.

Turn off on display main power.

Square menu structure

・Pen1~3：Draw lines.

・Eraser：Erase hand-drawn lines.

・Select ：Select an object.

You can move/enlarge/rotate

/delete/copy.

・Redo ：Redo the immediately preceding

canceled operation.

・View ：Enlarge the view of the whiteboard,

change the display position and pages.

・Undo ：Cancel the immediately preceding

operation.

Tool bar structure (in bottom)

・Drawing Object：Draw a figure or line/arrow.

・Paste：Pastes a copied object.

・Open：Open a file.

・Text ：Enter text by software key board.

・Insert image：

：Insert an image file.

：Insert Screen capture.

・Save：Save file.

・All function：Displays all functions in list view.

・Print：Print file.

You can select current sheet or all.

① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪

① “Pin” button： Touch to switch between the pin / do not pin settings.

② Sheet list ： Shows the sheets as thumbnails.

③ Settings ： Displays the pen software settings screen.

④ Search box ： You can search for text and handwritten characters

in the box.

⑤ Sheet navigation buttons：Touch the sheet navigation button

to change the displayed sheet.

⑥ Page No. of the current sheet：

⑦ Add sheet button：When the last sheet is displayed,

press to add a sheet at the end.

⑧ Board list： Touch to display the list of boards as thumbnail images.

：Add White board

：Add overlay board

*If you have already open overlay board, you can not add this.

⑨ Minimize ： The software will be minimized in the task tray.

⑩ Window / Maximize ： Displays the software in a window.

* Whiteboard mode only..

⑪ Quit ： The software is exited.

4