Portable LCD DVD Player

Instruction Manual

Model TC2120PD

1 / AL L

4

7

1

0

2

5

8

3

6

9

Please read these instructions carefully and retain for future reference.

Help line

For assistance during normal working hours (9am-5pm, Mon-Fri, New Zealand local time) call

Oriental Pacific International Ltd.

NZ call: 0800 89 85 80

Email: [email protected]

SYMBOLS

The graphic symbols used in this manual or on the back cover of the set mean the following:

Read this manual in full before use.

Class II Double insulated Appliance

The lightning flash symbol is intended to alert the user to the enclosures that contain hazardous voltages.

The exclamation symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

IMPORTANT SAFEGUARDS

When using any electrical apparatus always observe safety regulations and use basic safety precautions to reduce the risk of fire, electric shock and personal injury, including the following

Read, Keep and Follow these instructions, heeding all Warnings.

CAUTION! This is a class 1 laser product. However this player uses a visible laser beam which could cause hazardous radiation exposure if directed. Be sure to operate the equipment as directed. Do not place eyes close to any openings when connected to the mains supply.

WARNING!

Do not remove any cover.

WARNING!

No objects filled with liquid, such as vases, shall be placed on this equipment or in any position where liquid may fall into this equipment or any other electrical apparatus.

WARNING! Do not insert any objects into any openings of this equipment or any other electrical apparatus.

WARNING!

Do not use this apparatus near water. To avoid the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashes and is strictly for indoor use only.

WARNING!

Do not immerse in any liquid whilst in use or cleaning. Clean only with a damp cloth, dry with a dry towel. Do not use harsh abrasives as these may damage the plastic parts.

WARNING! DO NOT block any ventilation openings. Keep away from curtains, newspapers and restricted areas. Install in accordance with any specific manufacturer’s instructions. Always allow a sufficient gap around the apparatus to avoid overheating.

WARNING! Do not install near any heat sources such as radiators, gas heaters, stoves or other apparatus (including amplifiers) that produce heat. Do not leave in direct sunlight.

WARNING!

Do not place any naked flame source, such as lighted candles on any electrical apparatus.

WARNING! Connect to a suitable 230-240 V ~ 50 Hz power supply only.

WARNING! Keep out of reach of young children. This apparatus is not suitable for use by young children or infirm persons without supervision. Young children must be supervised to ensure that they do not play with the apparatus. Ensure young children have enough knowledge to operate the equipment safely if they do have access to this equipment.

WARNING! Do not abuse or damage a power cord. If any power cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person in order to avoid a hazard. A replaceable cord must be replaced with an authorised replacement from an authorised service agent only.

WARNING! Only use attachments/accessories specified by the manufacturer.

WARNING! Unplug completely from the power source this apparatus during lightening storms or when unused for long periods of time.

WARNING! Attention is drawn to the environmental aspects of disposing of any battery.

WARNING! Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

WARNING! For household use only, this apparatus is not intended for commercial use.

WARNING! If this apparatus is to be used by a third party, please supply these instructions with it.

WARNING! No liability will be accepted for any personal injury or damage caused by failure to follow these instructions.

This product incorporates copyright protection technology that is protected by U S patent rights. Use of this copyright protection technology must be authorised by the Macrovision, and is intended for home and other limited viewing use only unless otherwise authorised by

Macrovision. Reverse engineering or disassembly is prohibited.

Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Confidential Unpublished Works, 1992-1997 Dolby Laboratories. Inc. All rights reserved.

TABLE OF CONTENTS

TABLE OF CONTENTS.........................................

..................................................

.............................................

....

...............

......

..1

PACKING LIST.................................................................................................................................................................................2

ACCESSORIES LIST ..........................................................

............................................

.....

..........

...........

................................

......2

OVERVIEW OF THE DVD PLAYER &GET A QUICK GLANCE OF THE REMOTE CONTROLLER .....

......................................

..3

USING THE REMOTE CONTROLLER AND THE AC ADAPTER..............

...................................................................

.....

. ......4

CONNECT THE DVD PLAYER TO OTHER APPLIANCES & HOW TO USE THE EARPHONES .................................................5

OPERATIONS..........................................................................................................

................................................

........

........

....6-7 preparation get started adjust the volume skip ahead or back rapid advance/reverse pause or step play stop play slow motion play (DVD/VCD) repeat 1/all search for preferred scene program play zoom play on screen display information change audio sound track language (DVD/VCD disc) multi-angle viewing (DVD only) changing subtitle language (DVD only) enjoying video CDs with PBC feature

MP3 playback

KODAK Picture CD/JPEG CD playback

KODAK Picture CD/JPEG CD operations

INITIAL SETTINGS.......................................................

..................................................................

.............................................7-8 common procedures for initial settings system setup language setup audio setup video setup speaker setup

DISC HANDLING PRECAUTIONS.................................................................................................................................................9

TROUBLESHOOTING....................................................................................................................................................................9

CAUTIONARY NOTES.............................................................................................................................................................10-11

SPECIFICATIONS.........................................................................................................................................................................12

Guarantee Card.............................................................................................................................................................................13

1

PACKING LIST

Main Unit............................................1pc

Li-ion Battery.....................................1pc

AC Power Adaptor.............................1pc

9V Car Power Adaptor.......................1pc

ACCESSORIES LIST

Install the battery into the remote control as illustrated below:

A/V Cable............................................1pc

Remote control with battery.............1pc

Earphone............................................1pc

Carrying Case....................................1pc

+

Lithium Cell

Cr2025

3V sc2

Attach the rechargeable battery pack onto the play's bottom as illustrated below:

BACK VIEW

SIDE VIEW

NOTE:

This unit works either on the battery pack supplied or the AC power: unplug the AC Power adapter from the DC input jack to work on the battery pack (after fully charged); plugging the AC Power adapter while the battery pack is attached initiates the charging of this battery, the charge LED indicator lights up red once, and then turns off (about 5 seconds), after that, the indicator will steady on red. When the battery is fully charged the indicator turns off again. Fully charging a run-out battery pack may take 5 hours or longer. A fully charged battery pack can endure approximately 2.5 hours of continuous DVD playback. This playing time may vary with the surrounding environment, the volume level of the speaker and the battery condition. It is advised that you wait 10-20 minutes before recharging the battery pack if it has turned flat during operation.

Connecting to a car adaptor

IMPORTANT: The 9V car power adaptor is designed for use with vehicles that have a 12V, negative ground electrical system.

WARNING:

Disconnect the car power adaptor when not in use. Not in use in 24V vehicles.

To the cigarette lighter socket

!

!

!

!

CAUTIONS:

!

Use the unit only with 9V car power adaptor, use with other car power adaptor could damage the unit.

The recommended 9V car power adaptor is for use with this unit only. Do not use it with other equipment.

In the interests of road traffic safety, do not operate the unit or view video program while driving a vehicle.

Make sure the unit is fastened securely to prevent from moving outside of the vehicle in an accident

When the inside of the cigarette lighter socket is dirty with ashes or dust, the plug section may become hot due to poor contact.

Be sure to clean the cigarette lighter socket before use.

!

After use, disconnect the 9V car power adaptor from both the unit and cigarette lighter socket.

FUSE REPLACEMENT

FUSE

2

1

2

3

4

5

6

7

8

9

10

11

12

13

OVERVIEW OF THE DVD PLAYER:

1

5

6

7

8

9

10

2

3

4

11 12 13 15

14

RIGHT VIEW

28

29

26

27 25

24

FRONT VIEW

22

23

20

21

18

19

16

17

1. LCD SCREEN

2. L&R SPEAKERS

3. BRIGHTNESS ADJUST KEYS

4. COLOUR ADJUST KEYS

5. AUDIO KEY

6. DISPLAY KEY

7. SUBTITLE KEY

8. F.FWD KEY

9. F.BWD KEY

10. VOLUME + & - KEYS

11. DISC COVER

12. LOCK KEY

13. DISC COVER OPEN KEY

14. NAVIGATION UP KEY

15. NAVIGATION LEFT KEY

16. NAVIGATION DOWN KEY

17. ENTER KEY

18. NAVIGATION RIGHT KEY

19. SETUP KEY

20. PLAY/PAUSE KEY

21. STOP KEY

22. PREVIOUS KEY

23. NEXT KEY

24. DC 9V INPUT SOCKET

25. POWER ON/OFF SWITCH

26. COAXIAL SOCKET

27. S-VIDEO SOCKET

28. A/V OUTPUT SOCKET

29. PHONES SOCKET

30. REMOTE SENSOR

31. POWER INDICATOR

31 30

GET A QUICK GLANCE AT

THE REMOTE CONTROLLER

POWER DISPLAY SETUP

TFT ON/OFF

1

VOLUME

4

REPEAT

1/ALL

MENU

7

SUBTITLE

0

PLAY

2

5

8

+10

3

6

9

CLEAR

STOP

TITLE SELECT

AUDIO PAUSE/STEP SLOW

F.BWD

F.FWD

PREV NEXT

ANGLE ZOOM PROGRAM SEARCH

14

15

16

17

18

19

20

21

22

23

24

25

26

1. POWER button

2. VOLUME buttons

3. REPEAT 1/ALL button

4. MENU button

5. SUBTITLE button

6. PLAY button

7. TITLE button

8. AUDIO button

9. PAUSE/STEP button

10. F.BWD button

11. F.FWD button

12. ANGLE button

13. ZOOM button

14. DISPLAY button

15. SETUP button

16. TFT ON/OFF button

17. NUMERIC buttons

18. CLEAR button

19. STOP button

20. SELECT button

21. NAVIGATION buttons

22. SLOW button

23. NEXT button

24. PREV button

25. SEARCH button

26. PROGRAM button

3

USING THE REMOTE CONTROLLER:

NOTE:

The operating range of this remote controller may vary according to the brightness of the room.

Avoid bright light (sunshine or artificial light) aiming directly at the remote sensor. This may cause the remote controller not to work properly.

Do not block the remote controller from the remote sensor by solid objects placed between them.

Use of this remote controller while operating the remote controller of another appliance is not recommended as such operation may cause the remote controller not to work reliably.

REMOTE SENSOR

7 m

30 30

INFRARED EMITTER OF REMOTE CONTROLLER

IMPORTANT:

Uninstall the battery when the player is not to be used for a long period of time to prevent battery from leaking, which may result in harm.

USING THE AC ADAPTER:

Always turn off the DVD player via the Power on/off Key prior to connecting or disconnecting the AC ADAPTER.

Be sure to use the supplied AC adapter. Using a different type of adapter may cause malfunction or damage to the product.

When the AC adapter is used for prolonged periods of time, it may heat up. This is normal and is not a cause for concern.

When not using the adapter, unplug it from the wall outlet.

Keep the AC adapter free from moisture, cold, and dust. Otherwise, a risk of fire or electric shock may be resulted in.

To power outlet

WARNINGS:

Only use the AC adapter supplied with this player.

Be sure to unwind the AC adapter cable (DC output cable) before using, as electromagnetic interference may cause problems with other devices.

Always turn off the DVD player when inserting or removing the AC adapter.

Before storing the battery pack, make sure it is completely drained.

Be sure to recharge the battery at least once every six months to ensure proper battery life.

4

CONNECT DVD PLAYER TO OTHER APPLIANCES

It is recommended you connect the player to a multi-system TV.

Ensure that this player and other appliances (TV set and amplifier) that will be connected to the player are set to OFF mode and that the AC cords are disconnected from the wall outlet.

Avoid blocking ventilation holes of the connected appliances and make sure air around there can circulate freely.

Read carefully and follow the instructions before connecting other appliances.

Observe the color coding when connecting audio and video cables.

AUDIO R AUDIO L VIDEO IN

S-VIDEO

AV AUDIO/VIDEO INPUT

YUV INPUT

TV SET

A/V cable

S-video cable

(optional)

Coaxial digital audio cable

To coaxial digital audio input connector

Decoder or Amplifier with Dolby Digital

(AC-3/DTS) processing

(All sold separately)

After connection is firmed and securely done, plug AC ADAPTER to an applicable wall outlet and turn on the player.

1

S-VIDEO OUTPUT CONNECTORS

The S-video output connector separates the color (C) and luminance (Y) signals before transmitting them to the TV set in order to achieve a sharper picture. (S-video cable is not supplied)

Use the S-video cable when connecting the player to a TV set equipped with an S-Video input connector for the best picture clarity possible.

2

COAXIAL DIGITAL AUDIO OUTPUT

When a DVD recorded in Dolby Digital/DTS is played, Dolby digital/DTS bitstream is output from the player's OPTICAL digital audio output connector. When the player is connected to a Dolby Digital/DTS decoder , you can enjoy theater-like audio quality at your home. [A coaxial audio cable (not included) is required when an optional Dolby digital/DTS decoder is used.]

HOW TO USE A PAIR OF EARPHONES OR HEADPHONES

You can attach a pair of headphones or earphones with a stereo mini-jack plug to the earphones socket for private listening as illustrated as on the right:

CAUTION:

Listening at high volume for a long moment could damage users' ears

.

NOTE:

1. Turn the Volume down before connecting.

2. The speakers are disconnected once earphones are attached to the

Earphones Socket.

3. Adjust the volume to a comfortable level using the Volume keys.

Adjust the volume

5

OPERATIONS

PREPARATION

Power on the TV set and select video input mode.

Power on the audio system which is connected to the player.

GET STARTED

1. Press POWER switch to turn on the player.

2. Press open key to open the disc tray.

3. Place a disc onto the disc tray.

4. Press CD cover to close the disc tray and the playback starts automatically.

5. When a menu screen appears on the TV, move the navigation buttons or press the numeric buttons to select a preferred track number, then press SELECT button to start playback.

ADJUST THE VOLUME

Press the VOLUME+ button to increase or button to reduce the volume.

VOLUME-

SKIP AHEAD OR BACK

Press NEXT SKIP or PREV SKIP button once during play to skip a chapter(DVD) or a track (Video CD/CD) ahead or backwards.

RAPID ADVANCE/ REVERSE

During playback, press F.FWD button or F. BWD button several times to scan the disc forward or backward at X2, X4,

X8, X20 normal speed.

Press PLAY button to resume normal play.

PAUSE OR STEP PLAY

During playback, press PAUSE/STEP button to pause; in pause mode, each time the PAUSE/STEP button is pressed, the player will only play one frame; to resume normal play, press PLAY button again.

STOP PLAYBACK

Press STOP button during playback to stop playback; the player activates its resume function when STOP is pressed in

STOP mode; press PLAY button again, playback resumes at the point it stopped previously; open the disc tray or press the

STOP button one more time to clear the resume function.

SLOW-MOTION PLAY (DVD/VCD)

Press SLOW button on the remote control during playback, the disc will be played at 1/ 2 normal speed at first, each time this button is pressed, the play speed becomes slower

(down to 1/7 normal speed.)

Press PLAY button, normal play will resume.

REPEAT 1/ALL

Press REPEAT 1/ALL button during play, it will repeat play one chapter/title or repeat all(for DVD disc), or repeat play a track or all tracks (for VCD / CD).

NOTE: repeat 1/all for VCD/CD disc will ONLY work in

PBC OFF mode.

SEARCH FOR PREFERRED SCENE

1. Press SEARCH button during play and highlight the item to be played (Title, Chapter, or Chapter time)by navigation buttons

2. Input the desired number or time via the numeric buttons.

3. Press SELECT button to confirm and the playback from the located scene starts.

4. To exit search menu, press SEARCH button directly.

PROGRAM PLAY(UP TO 16 MEMORIES)

1. Press PROGRAM during playback to display the program menu.

2. Select location(s) to be memorized via navigation buttons and then enter desired Titles/Chapters numbers via numeric buttons.

Note: Inputting leading zero is not necessary. Press +10 key to be on the tenth chapter/title/track. If the chapter/title/track number is behind the cardinal 10, press +10 key first and then the unit digit. Some figure inputs may be useless, because it 's greater figure than total title/chapter/track number on the disc.

Example: Track 3, press "3"

Track 12, press "+10" and then "2"

Track 21, press "+10" twice and then "1"

3. To start programmed playback, select PLAY on the menu; pressing PROGRAM button again to exit programming.

4. To clear programmed items, select the items and then press

CLEAR button on the remote control. To clear all items, select the <CLEAR> on the menu, and then press SELECT button on remote control.

5. You can also cancel program mode by clearing all the items in the program menu.

ZOOM PLAY

Press the ZOOM key continuously to zoom in the picture by

2, 3, and 4 times, zoom out by 1/2, 1/3, 1/4 normal size.

Press this key once more when the picture is at 1/4 size to return to the normal size display.

Scroll to view the enlarged picture using Navigation buttons.

ON SCREEN DISPLAY INFORMATION

When the player is in operation, press DISPLAY button continuously on the remote control, the screen will display parts of information(current disc type, title number, chapter number, playtime, audio language, audio type, subtitle language and multi angle, etc) in a sequence.

CHANGING AUDIO SOUNDTRACK

LANGUAGE(DVD/VCD DISC)

It is possible to change the audio soundtrack language to a different language from the one selected at the initial settings (This operation works only with discs on which multiple audio soundtrack languages are recorded).

Press AUDIO button during DVD disc play, the sound track language changes with the current sound track number shown on the TV screen.

Pressing AUDIO button during VCD disc play will change audio output mode: MONO L, MONO R and stereo.

NOTE: When no soundtrack languages are recorded, pressing this button will not work.

6

OPERATIONS

MULTI-ANGLE VIEWING (DVD ONLY)

Press ANGLE button during playback to display the number of angles being played and then select a desired angle to view the scene.

Note: only the DVDs shot with multi-angle scenes have this function.

CHANGING SUBTITLE LANGUAGE (DVD ONLY)

Press SUBTITLE button during playback, the subtitle language shown on the screen will change as a response to each press;

When the desired language appears, release the button to view the subtitle in that language.

Note: this function only works on the DVDs recorded with multi-language subtitles.

ENJOYING VIDEO CDS WITH PBC FEATURE

After loading a VCD 2.0/1.0 with PBC, the TV screen shows the Disc formats and then a menu.

Select desired track by means of numeric buttons: use one corresponding key of numeric buttons 1~ 9 to choose track 1 to track 9 ; 0 key to choose track 10; If the track number exceeds 10, press +10 button first, and then numeric buttons

1 ~ 9.

During playback, press MENU button to return main menu(DVD).press this button to select PBC ON/OFF mode(VCD)

TITLE button Play the title (DVD)

LCD ON/OFF Press the TFT ON/OFF button to turn on or off the LCD display.

MP3 PLAYBACK

1.

Load the Mp3 disc onto the disc tray and the TV screen will show all its folders after a few seconds.

2. Select the folder you want by the navigation buttons and then SELECT button to confirm.

3. The files in this folder are displayed and select your

4.

favourable song via navigation buttons and press SELECT button to start playback.

Press NEXT and PREV button to select track directly.

5.

Press REPEAT 1/all button change play mode.

REPEAT 1- repeat one file.

REPEAT DIR- repeat all tracks in the current album

REPEAT ALL- repeat all tracks in current disc.

REPEAT OFF-cancel repeat modes.

KODAK PICTURE CD / JPEG CD PLAYBACK

Slide show of Kodak Picture CD after being loaded begins automatically;

Folders of JPEG picture CD after being loaded are displayed on the TV screen; use the navigation buttons to select the desired folder and then press SELECT button to confirm.

The files in this folder are displayed and you can select your favourable pictures using the up/down navigation buttons and press SELECT button to start playback.

Preview of the picture will be displayed while you scroll across the filenames.

KODAK PICTURE CD / JPEG CD OPERATIONS

1. PLAY MODES

Press 1/all button during play to change the play modes.

REPEAT 1- repeat one file

REPEAT DIR- repeat all picture in the current album

REPEAT ALL- repeat all pictures in current disc.

REPEAT OFF- cancel repeat modes.

During playback, press STOP to enter preview mode.

7

2.

SKIP TO NEXT/PREVIOUS PICTURE

Press NEXT button to skip to the next picture or PREV button to the previous picture.

If no key is pressed for a few seconds, it will skip to next picture automatically.

3.

PICTURE ROTATIONS

Press RIGHT and LEFT navigation buttons to rotate the picture Clockwise and anti-clockwise respectively.

4.

PICTURE FLIPS

Press UP navigation button to flip the picture vertically.

Press DOWN navigation button to flip the picture horizontally

5.

PICTURE ZOOM IN/OUT

Press ZOOM button continuously ,the picture zooms in by 2,

3, 4 times or zooms out by 1/2, 1/3, 1/4 the original size.

Press this button once more when the picture getting 1/4 size to return to the normal play.

If the picture is enlarged, you may use the navigation buttons to view blocked parts of the picture.

6.

SLIDE SHOW TRANSITION MODES

During slide show playback, press the PROGRAM button cyclically to select one of the following modes to play.

WIPE TOP

WIPE BOTTOM

WIPE LEFT

WIPE RIGHT

DIAGONAL WIPE LEFT TOP

DIAGONAL WIPE RIGHT TOP

DIAGONAL WIPE LEFT BOTTOM

DIAGONAL WIPE RIGHT BOTTOM

EXTEND FROM CENTER H

EXTEND FROM CENTER V

COMPRESS TO CENTER H

COMPRESS TO CENTER V

WINDOW H

WINDOW V

WIPE FROM EDGE TO CENTER

RANDOM

NONE

COLOR AND BRIGHTNESS ADJUSTMENT(FOR THE

LCD SCREEN)

Use the Color +/- and Brightness+/- keys to adjust the color intensity and brightness respectively.

INITIAL SETTINGS

Initial settings page is for you to make your preferred settings up for your player. Once the initial settings are done they are retained in the CPU of the player until otherwise modified.

COMMON PROCEDURES FOR INITIAL SETTINGS

1. Press SETUP button.

2. Use the navigation buttons to select the item you want to modify, press SELECT button to confirm, setting page with further setting items displayed shows on the TV screen. Again use navigation buttons to make changes.

Press again SELECT button to confirm modifications.

3. Use navigation buttons to switch to another setting on the main setting page.

4. Press SETUP button to exit main setting page.

INITIAL SETTINGS

1.SYSTEM SETUP

TV SYSTEM

LCD MODE

TV TYPE

PASSWORD

RATING

DEFAULT

EXIT SETUP

1.1 TV SYSTEM - It is used to select the TV mode.

Options: NTSC / PAL/ AUTO

Please select this option as per your TV set.

1.2

LCD MODE - It is used to select the LCD MODE.

Options: 4:3 16:9

1.3 TV TYPEit is used to select the TV scan mode, please set as per your TV set.

Options: 4:3PS :

4:3LB :

Normal Pan & scan mode normal Letter box mode

16:9 : 16:9 wide screen mode

1.4 PASSWORD/CHANGE - input password to unlock the system. The steps are as follows:

1.4.1 Enter SYSTEM SETUP , select the PASSWORD item by scrolling the down navigation button, and then press the right navigation button to select the input box.

1.4.2 Input user's password"0000" to unlock it, in this case, select the input box again to change the password by inputting another new four numeric numbers and then press SELECT button to confirm. When the password is changed, you are needed to input the new one to unlock the system.

1.4.3 Once you forget your own password, use the supervisor's password "8200" to unlock it.

NOTE : If wrong password was input in unlock status, the system will lock.

1.5 RATING Set the rating of this player. If you want to change the rating of parental lock, please input the password to unlock first.

Options: 1 KID SAFE/2 G/ 3 PG/ 4 PG 13/ 5 PG-R/ 6R/7

NC-17/ 8 ADULT

1.6 DEFAULT Reset to factory settings.

Options: RESTORE

2. LANGUAGE SETUP

OSD LANGUAGE

AUDIO LANG

SUBTITLE LANG

MENU LANG

EXIT SETUP

3. AUDIO SETUP

AUDIO OUT

EXIT SETUP

3.1 AUDIO OUT Set digital output code format.

Options:

SPDIF/OFF: I f you are not connecting to an amplifier via digital output, please select this option.

SPDIF/RAW: Used in general home theatre, select this can output 5.1 channels audio.

SPDIF/PCM: S elect this it can only output 2 channel, but you will get higher quality audio output.

4. VIDEO SETUP

BRI

CON

HUE

SATURATION

EXIT SETUP

4.1 BRI-- to set the brightness for the display.

Options: 0/2/4/6/8/10/12

4.2 CON--to set the contrast effect for display.

Options: 0/2/4/6/8/10/12

4.3 HUE--to set the colour impression for display.

Options: -6/-4/-2/0/+2/+4/+6

4.4 SATURATION--to set the saturation level for display.

Options: 0/2/4/6/8/10/12

5. SPEAKER SETUP

DOWNMIX

EXIT SETUP

2.1 OSD LANGUAGE It is used to select different On Screen

Display language for different user.

Options: ENGLISH

(The number of these options depends on the customer's need.)

2.2 AUDIO LANG select preferred audio language.(DVD only, need disc software support)

2.3 SUBTITLE LANGSelect preferred subtitle language.

(DVD only, need disc software support)

2.4 MENU LANG Select preferred disc menu language.

(DVD only, need disc software support)

5.1 DOWNMIX

Options: LT/RTLeft/Right mix mode

STEREOStereo mode

8

DISC HANDLING PRECAUTIONS

—

—

—

—

—

—

—

Hold the disc by the edge so the surface will not be soiled with finger prints. Finger prints, dirt and scratches can cause skipping and distortion.

Do not write on the label side with a ball-point pen or other writing utensils.

Do not apply benzine, thinner, and liquid that prevents against static electricity.

Be careful not to drop or bend the disc.

Instal only one disc on the disc tray.

Do not try to close the disc tray when the disc is not in stalled properly.

Be sure to store the disc in it's case when not in use.

TROUBLESHOOTING

If your DVD player does not seem to be functioning properly, check the items below before you contact an authorized service center

Symptom

Power does not turn on or suddenly turns off.

Battery pack is in place but the power does not turn on or suddenly turns off

Remote control won't work

No picture or sound

No picture

No sound

No picture and sound

Distorted video or sound

Check

Make sure the AC adapter is securely plugged into an AC outlet.

Turn the power off and then back on.

Check that the battery pack is charged. If not, recharge it.

Check that the battery is inserted in the and direction properly.

The battery may be flat. Replace it with a new one.

Check that the signal transmission is directed at the remote control sensor on the DVD player.

Remove the obstacle between the remote controller and remote control sensor.

Check that the A/V cables are securely connected.

Check that the disc is a DVD (region number 1 or all), DVD-RW, VIDEO CD or AUDIO CD.

Do not use a disc that has scratches or dirt.

Check that the label-side of the disc is facing up.

The pick-up lens of the DVD player may be dirty. Contact the service center for lens cleaning.

Check that the TV channel is set to VIDEO or AV if viewing with a TV.

Check that the LCD display is turned on.

Check that the display panel is open. If it is closed, audio will not be output to the speakers.

Check the volume setting. If set to zero, turn up volume level.

Check that the headphones are plugged into the PHONES socket.

Speakers cannot be used with the headphones.

Check that the battery is properly installed and AC Adapter is properly connected.

Use a disc without scratches or dents.

9

Cautionary Notes

When Moving the Player

Be sure to remove the disc from the player before packing for moving.

It is recommended that you also remove the disc from the player and turn off the power when not using the player.

Saving Power

It is recommended that you turn off the power to the DVD player when not in use.

If you are not going to use it for prolonged period of time, unplug the power cord from the wall outlet.

Maintenance of LCD Screen

To keep the screen clean, turn off the power and then wipe with a soft cloth.

About LCD Screen

This LCD panel is designed with the latest technology, ensuring 99.99% of active pixels.

Cautions on Using Battery pack

Danger!

Always follow the safety information below when using the battery pack. Otherwise, a short circuit, overheating, smoke, fire, or damage to the product may result.

1. Never disassemble or modify the battery pack in any way. Do not touch the terminal of the battery pack with a metal object.

2. Do not let any metal object inside the battery pack.

3. Do not place the battery pack in direct sunlight, dashboard of a vehicle, or high temperature.

4. Do not expose the battery pack to water, fire, or heat.

5. Always use the included AC adapter when charging the battery pack.

6. This battery pack is designed exclusively for your portable DVD player. Do not use it with other devices.

Warning!

1. Do not drop or subject to strong vibration.

2. Keep out of reach of children.

3. The battery pack may leak fluid that is harmful to your eyes.

If this fluid gets in your eyes, wash eyes immediately with large amounts of running water and get medical attention at once.

If the fluid gets on your skin or clothing, wash immediately with water.

Caution!

1. When not using the battery pack, remove it and store in a cool place.

2. Do not use the AC adapter or battery pack for a prolonged period of time during recharging. You might burn the battery.

3. Keep the battery pack free from smoke, steam, moisture, and dust.

Do not place the battery pack near a kitchen, heater, or any other place where there is smoke or steam.

Doing so may result in fire or electric shock.

Avoid direct sunlight, heater, or high temperature place. etc, inside of a car. It can cause explosion or fire.

Doing so may cause a short circuit, overheating, smoke, fire, or damage to the product.

4. Using the battery pack under 10 C or over 30

°

C can cause reduced battery life.

10

Cautions on Storing Battery pack

Even when not in use, power is consumed continuously. To reduce the power consumption, follow the procedure below.

1. Remove the battery pack from the DVD player after every use.

2. When not using the DVD player, turn off the power. If the player is left in the standby mode, power will be slowly drained from the battery pack and the charging capacity will decrease.

3. Before storing the battery pack, completely drain the power by operating the player and store in a cool, dry place.

If stored in a hot place, the capacity of the battery pack will decrease.

4. The battery pack must be recharged and then used on the DVD player at least once every 6 months.

This helps to prevent the loss of capacity.

AC Adapter

The supplied AC adapter is compatible with 50Hz electrical system (230V~240V range).

Use of the AC adapter depends on the specific voltage requirements and electrical outlet design.

Using the AC adapter near a radio may cause poor reception.

Do not let any type of flammables, liquid, or metal objects in the adapter.

The adapter is covered with an outer plastic sheath. Do not peel open the sheath.

Do not drop, jar, or shake the adapter.

Do not place in direct sunlight.

Do not use in high temperature or cold and humid environments.

Cleaning and Maintenance

Many plastic parts are used in this DVD player casing. Do not use volatile chemicals such as benzene or thinner.

This might damage the finish.

Wipe the casing with a soft, dry cloth. For excessive dirt, use a cloth dampened in a diluted neutral detergent. and wipe again with a soft, dry cloth.

Wipe off fingerprints or dirt on the LCD screen using a soft, dry cloth.

Cautions on Charging Battery pack

Charge within the surrounding temperature range of 10-30 degrees. Charging at a low surrounding temperature takes longer charging time and shortens the life time of the battery pack. While it is not likely to fully charge it at high temperatures.

The battery pack becomes warm during recharge or use. This is normal and is not a cause for concern.

A hot battery pack may take longer to charge or may not be charged at all. Wait until the battery pack cools down before charging.

CAUTION

To avoid electric shock, this unit must not be exposed to dripping water or water splash.

Minimum distances around the apparatus for sufficient ventilation.

The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.

No naked flame sources, such as lighted candles, should be placed on the apparatus.

The use of apparatus in tropical and/or moderate climates.

Before scrapping the appliance, remove the batteries and place them in the appropriate battery collection container.

11

SPECIFICATIONS

Description

Model

Portable DVD Player with 7” LCD Screen

TC2120PD

Power input

DVD format

Screen viewable size

DC 9V 2000mA

DVD, DVD+R/RW, DVD-R/RW, CD, Picture CD, MP3 CD

7” LCD Screen

Net weight

Dimensions

Power Adapter Specification

1.0kg

Body size:

208.5(W) x 172.5(D) x 46.5(H) mm

Model APX001A

Power input

Power Consumption

AC 230-240V ~ 50Hz power supply only

17 W

Power Output DC 9V

Approval Number Q050415

Note: Design and specifications are subject to change without prior notice for the purpose of performance improvement.

12

Guarantee Card

This Product is guaranteed against faulty materials and workmanship for a period of two years from date of purchase. The obligation to the purchaser under this warranty is limited to servicing the unit and replacing defective parts when the product is returned freight prepaid to the retailer. This warranty becomes void if the product has been tampered with, damaged, damaged by accident, damaged in any other way by improper use or has been purchased second hand.

Warning! Refer specific instructions. All production orders have quality inspections. IN the unlikely event of a deficiency, please contact the retailer from whom this product was purchased.

WARRANTY FOR APPLIANCES USED COMMERCIALLY LIMITED TO 90 DAYS

Type of Appliance: _________________________________________________

Model Number: __________________Purchase date:

Product

Your Name:

Address:

Number:

IMPORTANT!

Please retain this warranty card with your purchase receipt.

Please do not post to the retailer or importer. If service is required, both of these documents are to be returned with the appliance to your retailer, otherwise a fee may be charged.

13