FUJIFILM X-T30 II Camera Owner's Manual

FF210005 Owner’s Manual BL00005160-200 EN Introduction Thank you for your purchase of this product. Be sure that you have read this manual and understood its contents before using the camera. Keep the manual where it will be read by all who use the product. For the Latest Information The latest versions of the manuals are available from: http://fujifilm-dsc.com/en/manual/ The site can be accessed not only from your computer but also from smartphones and tablets. It also contains information on the software license. For information on firmware updates, visit: https://fujifilm-x.com/support/download/firmware/cameras/ ii P Chapter Index Menu List 1 Before You Begin iv 1 2 First Steps 27 3 Basic Photography and Playback 41 4 Movie Recording and Playback 47 5 Taking Photographs 53 6 The Shooting Menus 103 7 Playback and the Playback Menu 183 8 The Setup Menus 209 9 Shortcuts 245 10 Peripherals and Optional Accessories 261 11 Connections 279 12 Technical Notes 295 iii Menu List Camera menu options are listed below. Menu List Shooting Menus Adjust settings when shooting photos or movies. N See page 103 for details. Photo Menus N Items marked with both x and F icons are available in both the still photography and movie shooting menus. Changes to these items in either menu also apply to the item in the remaining menu. H IMAGE QUALITY SETTING IMAGE SIZE IMAGE QUALITY RAW RECORDING FILM SIMULATION 1⁄3 MONOCHROMATIC COLOR GRAIN EFFECT COLOR CHROME EFFECT COLOR CHROME FX BLUE WHITE BALANCE DYNAMIC RANGE D RANGE PRIORITY TONE CURVE 2⁄3 COLOR SHARPNESS HIGH ISO NR CLARITY LONG EXPOSURE NR LENS MODULATION OPTIMIZER COLOR SPACE PIXEL MAPPING 3⁄3 SELECT CUSTOM SETTING EDIT/SAVE CUSTOM SETTING AUTO UPDATE CUSTOM SETTING xF MOUNT ADAPTOR SETTING iv P G AF/MF SETTING 104 FOCUS AREA 105 AF MODE 106 AF-C CUSTOM SETTINGS 106 STORE AF MODE BY ORIENTATION 1⁄3 AF POINT DISPLAY yz 108 108 NUMBER OF FOCUS POINTS 108 PRE-AF 109 xF AF ILLUMINATOR 109 FACE/EYE DETECTION SETTING 113 AF+MF 114 MF ASSIST 114 FOCUS CHECK 2⁄3 115 INTERLOCK SPOT AE & FOCUS AREA 115 xF INSTANT AF SETTING 115 xF DEPTH-OF-FIELD SCALE 116 RELEASE/FOCUS PRIORITY 116 xF AF RANGE LIMITER 116 3⁄3 xF TOUCH SCREEN MODE 117 117 118 118 122 123 P 126 126 127 131 131 131 132 132 133 135 136 136 137 137 137 138 138 139 Menu List P F FLASH SETTING FLASH FUNCTION SETTING RED EYE REMOVAL TTL-LOCK MODE LED LIGHT SETTING COMMANDER SETTING CH SETTING 152 152 153 153 154 154 B MOVIE SETTING MOVIE MODE FILE FORMAT FULL HD HIGH SPEED REC F IS MODE AUDIO SETTING MIC/REMOTE RELEASE 155 155 155 155 156 157 P v Menu List P A SHOOTING SETTING SCENE POSITION 141 DRIVE SETTING 141 HDR 142 SPORTS FINDER MODE 144 1⁄2 144 PRE-SHOT sJ SELF-TIMER 145 SAVE SELF-TIMER SETTING 145 SELF-TIMER LAMP 146 INTERVAL TIMER SHOOTING 146 INTERVAL TIMER SHOOTING 147 EXPOSURE SMOOTHING PHOTOMETRY 147 148 2⁄2 SHUTTER TYPE FLICKER REDUCTION 149 IS MODE 150 ISO 150 xF WIRELESS COMMUNICATION 151 Movie Menus N Items marked with both x and F icons are available in both the still photography and movie shooting menus. Changes to these items in either menu also apply to the item in the remaining menu. Menu List P P H IMAGE QUALITY SETTING B MOVIE SETTING MOVIE MODE 158 167 F FILM SIMULATION FILE FORMAT 159 167 F MONOCHROMATIC COLOR FULL HD HIGH SPEED REC 160 167 F WHITE BALANCE FIX MOVIE CROP MAGNIFICATION 161 168 F DYNAMIC RANGE 1⁄3 1⁄2 F-Log RECORDING 161 168 F TONE CURVE 4K MOVIE OUTPUT 162 168 F COLOR FULL HD MOVIE OUTPUT 162 169 F SHARPNESS HDMI OUTPUT INFO DISPLAY 163 169 F HIGH ISO NR 4K HDMI STANDBY QUALITY 163 V INTERFRAME NR 169 HDMI REC CONTROL 163 2⁄2 F PERIPHERAL LIGHT CORRECTION 170 F PHOTOMETRY 163 xF MOUNT ADAPTOR SETTING 170 F IS MODE 164 2⁄3 F ISO 164 ZEBRA SETTING 165 ZEBRA LEVEL 165 MOVIE OPTIMIZED CONTROL oL 165 TALLY LIGHT 166 3⁄3 xF WIRELESS COMMUNICATION 166 vi Menu List P P AUDIO SETTING 171 171 172 172 173 173 174 174 174 174 175 177 INTERNAL MIC LEVEL ADJUSTMENT EXTERNAL MIC LEVEL ADJUSTMENT MIC JACK SETTING MIC LEVEL LIMITER WIND FILTER LOW CUT FILTER HEADPHONES VOLUME MIC/REMOTE RELEASE Q TIME CODE SETTING TIME CODE DISPLAY START TIME SETTING COUNT UP SETTING DROP FRAME HDMI TIME CODE OUTPUT P 178 178 179 179 179 179 179 180 P 181 181 181 182 182 vii Menu List G AF/MF SETTING F FOCUS AREA F AF MODE F AF-C CUSTOM SETTING xF AF ILLUMINATOR 1⁄2 F FACE/EYE DETECTION SETTING F MF ASSIST F FOCUS CHECK xF INSTANT AF SETTING xF DEPTH-OF-FIELD SCALE xF AF RANGE LIMITER 2⁄2 xF TOUCH SCREEN MODE FOCUS CHECK LOCK The Playback Menu Adjust playback settings. N See page 189 for details. Menu List C PLAY BACK MENU RAW CONVERSION ERASE CROP RESIZE 1⁄3 PROTECT IMAGE ROTATE RED EYE REMOVAL VOICE MEMO SETTING viii P C PLAY BACK MENU P 189 RATING 200 192 IMAGE TRANSFER ORDER 201 194 xF WIRELESS COMMUNICATION 202 195 SLIDE SHOW 202 2⁄3 196 PHOTOBOOK ASSIST 203 197 PC AUTO SAVE 204 198 PRINT ORDER (DPOF) 205 199 instax PRINTER PRINT 206 3⁄3 DISP ASPECT 207 Menu List Setup Menus Adjust basic camera settings. N See page 209 for details. D SOUND SETTING AF BEEP VOL. SELF-TIMER BEEP VOL. OPERATION VOL. SHUTTER VOLUME SHUTTER SOUND PLAYBACK VOLUME P D SCREEN SETTING P VIEW MODE SETTING 217 210 EVF BRIGHTNESS 217 211 EVF COLOR 217 211 EVF COLOR ADJUSTMENT 218 212 1⁄3 LCD BRIGHTNESS 218 212 LCD COLOR 218 212 LCD COLOR ADJUSTMENT 218 213 IMAGE DISP. 219 213 AUTOROTATE DISPLAYS 219 214 PREVIEW EXP./WB IN MANUAL MODE 220 214 NATURAL LIVE VIEW 220 P F-Log VIEW ASSIST 221 215 2⁄3 FRAMING GUIDELINE 221 215 AUTOROTATE PB 222 216 FOCUS SCALE UNITS 222 216 APERTURE UNIT FOR CINEMA LENS 222 216 DISP. CUSTOM SETTING 222 216 LARGE INDICATORS MODE(EVF) 223 LARGE INDICATORS MODE(LCD) 223 3⁄3 LARGE INDICATORS DISP. SETTING 224 INFORMATION CONTRAST ADJ. 224 x Q MENU BACKGROUND 225 225 F Q MENU BACKGROUND ix Menu List D USER SETTING FORMAT DATE/TIME TIME DIFFERENCE Qa 1⁄2 x MY MENU SETTING F MY MENU SETTING SENSOR CLEANING SOUND & FLASH RESET 2⁄2 REGULATORY Menu List P D CONNECTION SETTING Menu List D BUTTON/DIAL SETTING FOCUS LEVER SETTING x EDIT/SAVE QUICK MENU F EDIT/SAVE QUICK MENU FUNCTION (Fn) SETTING 1⁄2 COMMAND DIAL SETTING SHUTTER AF SHUTTER AE SHOOT WITHOUT LENS SHOOT WITHOUT CARD FOCUS RING FOCUS RING OPERATION AE/AF-LOCK MODE 2⁄2 AWB-LOCK MODE APERTURE RING SETTING (A) APERTURE SETTING TOUCH SCREEN SETTING 226 227 227 227 228 229 229 230 230 230 230 231 231 231 232 232 D POWER MANAGEMENT AUTO POWER OFF PERFORMANCE BOOST SETTING 234 235 235 D SAVE DATA SETTING FRAME NO. SAVE ORG IMAGE EDIT FILE NAME SELECT FOLDER COPYRIGHT INFO 236 237 237 238 238 x P P P Bluetooth SETTINGS 239 PC AUTO SAVE 240 instax PRINTER CONNECTION SETTING 241 CONNECTION MODE 242 USB POWER SUPPLY SETTING 243 GENERAL SETTINGS 244 INFORMATION 244 RESET WIRELESS SETTING 244 P Table of Contents Introduction ....................................................................................................ii For the Latest Information ................................................................................... ii Menu List .........................................................................................................iv Shooting Menus ........................................................................................................iv The Playback Menu ...............................................................................................viii Setup Menus ...............................................................................................................ix Supplied Accessories ............................................................................. xxiii About This Manual .................................................................................. xxiv Symbols and Conventions .............................................................................xxiv Terminology ............................................................................................................xxiv 1 Before You Begin 1 Parts of the Camera ......................................................................................2 The Focus Stick (Focus Lever).............................................................................4 The Shutter Speed Dial ..........................................................................................4 The Drive Dial ...............................................................................................................5 The Exposure Compensation Dial ...................................................................5 The Auto Mode Selector Lever..........................................................................6 The Command Dials ................................................................................................7 The Indicator Lamp ..................................................................................................8 The LCD Monitor ........................................................................................................9 Focusing the Viewfinder........................................................................................9 Camera Displays.......................................................................................... 10 The Electronic Viewfinder .................................................................................. 10 The LCD Monitor ..................................................................................................... 12 Adjusting Display Brightness........................................................................... 14 Display Rotation ...................................................................................................... 14 Choosing a Display Mode ................................................................................. 14 The DISP/BACK Button ........................................................................................ 16 Customizing the Standard Display .............................................................. 17 Using the Menus......................................................................................... 19 The Menus .................................................................................................................. 19 Selecting a Menu Tab........................................................................................... 20 xi Touch Screen Mode ................................................................................... 21 Shooting Touch Controls ................................................................................... 21 Playback Touch Controls .................................................................................... 25 2 First Steps 27 3 Basic Photography and Playback 41 4 Movie Recording and Playback 47 5 Taking Photographs 53 Attaching the Strap ................................................................................... 28 Attaching a Lens ......................................................................................... 29 Inserting the Battery and a Memory Card ......................................... 30 Compatible Memory Cards .............................................................................. 32 Charging the Battery ................................................................................. 33 Turning the Camera On and Off............................................................ 35 Checking the Battery Level ..................................................................... 36 Basic Setup.................................................................................................... 37 Choosing a Different Language .................................................................... 39 Changing the Time and Date.......................................................................... 39 Taking Photographs .................................................................................. 42 Viewing Pictures ......................................................................................... 44 Deleting Pictures ........................................................................................ 45 Recording Movies....................................................................................... 48 Adjusting Movie Settings .................................................................................. 50 Viewing Movies ........................................................................................... 51 xii Choosing a Shooting Mode .................................................................... 54 Mode P: Program AE ............................................................................................. 54 Mode S: Shutter-Priority AE .............................................................................. 56 Mode A: Aperture-Priority AE.......................................................................... 59 Mode M: Manual Exposure ............................................................................... 60 Auto Mode .................................................................................................................. 61 Autofocus ...................................................................................................... 64 Focus Mode................................................................................................................ 65 Autofocus Options (AF Mode) ........................................................................ 67 Focus-Point Selection .......................................................................................... 69 Table of Contents Manual Focus ............................................................................................... 73 Checking Focus........................................................................................................ 75 Exposure Compensation ......................................................................... 77 C (Custom) .................................................................................................................. 78 Sensitivity ...................................................................................................... 79 AUTO............................................................................................................................... 80 Metering ........................................................................................................ 81 Focus/Exposure Lock ................................................................................ 82 Other Controls .......................................................................................................... 83 Bracketing ..................................................................................................... 84 O AE BKT .................................................................................................................... 85 W ISO BKT.................................................................................................................. 85 X FILM SIMULATION BKT ................................................................................ 85 V WHITE BALANCE BKT.................................................................................... 86 Y DYNAMIC RANGE BKT ................................................................................. 86 Z FOCUS BKT ......................................................................................................... 87 Continuous Shooting (Burst Mode) ..................................................... 89 Panoramas .................................................................................................... 91 Multiple Exposures .................................................................................... 94 Advanced Filters ......................................................................................... 96 Advanced Filter Options..................................................................................... 97 Flash Photography ..................................................................................... 98 Flash Settings ......................................................................................................... 100 6 The Shooting Menus 103 IMAGE QUALITY SETTING (Still Photography)................................104 IMAGE SIZE............................................................................................................... 104 IMAGE QUALITY .................................................................................................... 105 RAW RECORDING ................................................................................................. 106 FILM SIMULATION................................................................................................ 106 MONOCHROMATIC COLOR ........................................................................... 108 GRAIN EFFECT ........................................................................................................ 108 COLOR CHROME EFFECT ................................................................................ 108 COLOR CHROME FX BLUE............................................................................... 109 WHITE BALANCE................................................................................................... 109 xiii DYNAMIC RANGE ................................................................................................. 113 D RANGE PRIORITY.............................................................................................. 114 TONE CURVE ........................................................................................................... 114 COLOR......................................................................................................................... 115 SHARPNESS.............................................................................................................. 115 HIGH ISO NR ............................................................................................................ 115 CLARITY...................................................................................................................... 116 LONG EXPOSURE NR .......................................................................................... 116 LENS MODULATION OPTIMIZER ................................................................. 116 COLOR SPACE ......................................................................................................... 117 PIXEL MAPPING ..................................................................................................... 117 SELECT CUSTOM SETTING ............................................................................. 118 EDIT/SAVE CUSTOM SETTING....................................................................... 118 AUTO UPDATE CUSTOM SETTING ............................................................. 122 xF MOUNT ADAPTOR SETTING ............................................................ 123 AF/MF SETTING (Still Photography)...................................................126 FOCUS AREA ........................................................................................................... 126 AF MODE................................................................................................................... 126 AF-C CUSTOM SETTINGS ................................................................................ 127 STORE AF MODE BY ORIENTATION............................................................ 131 AF POINT DISPLAY yz ................................................................................ 131 NUMBER OF FOCUS POINTS ......................................................................... 131 PRE-AF......................................................................................................................... 132 xF AF ILLUMINATOR .................................................................................... 132 FACE/EYE DETECTION SETTING .................................................................. 133 AF+MF ........................................................................................................................ 135 MF ASSIST ................................................................................................................. 136 FOCUS CHECK........................................................................................................ 136 INTERLOCK SPOT AE & FOCUS AREA ....................................................... 137 xF INSTANT AF SETTING ........................................................................... 137 xF DEPTH-OF-FIELD SCALE .................................................................... 137 RELEASE/FOCUS PRIORITY ............................................................................. 138 xF AF RANGE LIMITER ................................................................................ 138 xF TOUCH SCREEN MODE....................................................................... 139 xiv Table of Contents SHOOTING SETTING (Still Photography) ..........................................141 SCENE POSITION .................................................................................................. 141 DRIVE SETTING ...................................................................................................... 141 HDR .............................................................................................................................. 142 SPORTS FINDER MODE ..................................................................................... 144 PRE-SHOT sJ .................................................................................................... 144 SELF-TIMER ............................................................................................................... 145 SAVE SELF-TIMER SETTING ............................................................................. 145 SELF-TIMER LAMP ................................................................................................ 146 INTERVAL TIMER SHOOTING.......................................................................... 146 INTERVAL TIMER SHOOTING EXPOSURE SMOOTHING ................. 147 PHOTOMETRY ........................................................................................................ 147 SHUTTER TYPE ....................................................................................................... 148 FLICKER REDUCTION ......................................................................................... 149 IS MODE ..................................................................................................................... 150 ISO ................................................................................................................................. 150 xF WIRELESS COMMUNICATION ......................................................... 151 FLASH SETTING (Still Photography)...................................................152 FLASH FUNCTION SETTING ........................................................................... 152 RED EYE REMOVAL .............................................................................................. 152 TTL-LOCK MODE ................................................................................................... 153 LED LIGHT SETTING ............................................................................................ 153 COMMANDER SETTING.................................................................................... 154 CH SETTING ............................................................................................................. 154 MOVIE SETTING (Still Photography) ..................................................155 MOVIE MODE.......................................................................................................... 155 FILE FORMAT ........................................................................................................... 155 FULL HD HIGH SPEED REC ............................................................................. 155 F IS MODE.............................................................................................................. 155 AUDIO SETTING .................................................................................................... 156 MIC/REMOTE RELEASE ...................................................................................... 157 MOVIE SETTING (Movie Recording) ...................................................158 MOVIE MODE.......................................................................................................... 158 FILE FORMAT ........................................................................................................... 159 FULL HD HIGH SPEED REC ............................................................................. 160 xv FIX MOVIE CROP MAGNIFICATION ............................................................ 161 F-Log RECORDING............................................................................................... 161 4K MOVIE OUTPUT .............................................................................................. 162 FULL HD MOVIE OUTPUT................................................................................ 162 HDMI OUTPUT INFO DISPLAY ...................................................................... 163 4K HDMI STANDBY QUALITY......................................................................... 163 HDMI REC CONTROL.......................................................................................... 163 F PHOTOMETRY ................................................................................................. 163 F IS MODE.............................................................................................................. 164 F ISO.......................................................................................................................... 164 ZEBRA SETTING ..................................................................................................... 165 ZEBRA LEVEL ........................................................................................................... 165 MOVIE OPTIMIZED CONTROL oL ......................................................... 165 TALLY LIGHT............................................................................................................. 166 xF WIRELESS COMMUNICATION ......................................................... 166 IMAGE QUALITY SETTING (Movie Recording) ................................167 F FILM SIMULATION ........................................................................................ 167 F MONOCHROMATIC COLOR .................................................................... 167 F WHITE BALANCE............................................................................................ 167 F DYNAMIC RANGE.......................................................................................... 168 F TONE CURVE .................................................................................................... 168 F COLOR ................................................................................................................. 168 F SHARPNESS ...................................................................................................... 169 F HIGH ISO NR..................................................................................................... 169 V INTERFRAME NR........................................................................................... 169 F PERIPHERAL LIGHT CORRECTION ....................................................... 170 xF MOUNT ADAPTOR SETTING ............................................................ 170 AF/MF SETTING (Movie Recording) ...................................................171 F FOCUS AREA .................................................................................................... 171 F AF MODE ........................................................................................................... 171 F AF-C CUSTOM SETTING ............................................................................ 172 xF AF ILLUMINATOR .................................................................................... 172 F FACE/EYE DETECTION SETTING ........................................................... 173 F MF ASSIST .......................................................................................................... 173 F FOCUS CHECK ................................................................................................ 174 xvi Table of Contents xF INSTANT AF SETTING ........................................................................... 174 xF DEPTH-OF-FIELD SCALE .................................................................... 174 xF AF RANGE LIMITER ................................................................................ 174 xF TOUCH SCREEN MODE....................................................................... 175 FOCUS CHECK LOCK .......................................................................................... 177 AUDIO SETTING (Movie Recording) ...................................................178 INTERNAL MIC LEVEL ADJUSTMENT ........................................................ 178 EXTERNAL MIC LEVEL ADJUSTMENT ....................................................... 178 MIC JACK SETTING .............................................................................................. 179 MIC LEVEL LIMITER .............................................................................................. 179 WIND FILTER ............................................................................................................ 179 LOW CUT FILTER ................................................................................................... 179 HEADPHONES VOLUME ................................................................................... 179 MIC/REMOTE RELEASE ...................................................................................... 180 TIME CODE SETTING (Movie Recording) ..........................................181 TIME CODE DISPLAY ........................................................................................... 181 START TIME SETTING .......................................................................................... 181 COUNT UP SETTING ........................................................................................... 181 DROP FRAME .......................................................................................................... 182 HDMI TIME CODE OUTPUT ............................................................................ 182 7 Playback and the Playback Menu 183 The Playback Display...............................................................................184 The DISP/BACK Button ..................................................................................... 185 Viewing Pictures .......................................................................................187 Playback Zoom...................................................................................................... 188 Multi-Frame Playback ........................................................................................ 188 The Playback Menu..................................................................................189 RAW CONVERSION .............................................................................................. 189 ERASE .......................................................................................................................... 192 CROP ............................................................................................................................ 194 RESIZE ......................................................................................................................... 195 PROTECT.................................................................................................................... 196 IMAGE ROTATE ....................................................................................................... 197 RED EYE REMOVAL .............................................................................................. 198 xvii VOICE MEMO SETTING ..................................................................................... 199 RATING........................................................................................................................ 200 IMAGE TRANSFER ORDER................................................................................ 201 xF WIRELESS COMMUNICATION ......................................................... 202 SLIDE SHOW............................................................................................................ 202 PHOTOBOOK ASSIST .......................................................................................... 203 PC AUTO SAVE ....................................................................................................... 204 PRINT ORDER (DPOF)......................................................................................... 205 instax PRINTER PRINT......................................................................................... 206 DISP ASPECT ........................................................................................................... 207 8 The Setup Menus 209 USER SETTING ............................................................................................210 FORMAT ..................................................................................................................... 210 DATE/TIME................................................................................................................ 211 TIME DIFFERENCE ................................................................................................ 211 Qa ......................................................................................................... 212 x MY MENU SETTING ..................................................................................... 212 F MY MENU SETTING...................................................................................... 212 SENSOR CLEANING ............................................................................................. 213 SOUND & FLASH................................................................................................... 213 RESET ........................................................................................................................... 214 REGULATORY .......................................................................................................... 214 SOUND SETTING .......................................................................................215 AF BEEP VOL. ........................................................................................................... 215 SELF-TIMER BEEP VOL. ....................................................................................... 215 OPERATION VOL.................................................................................................... 216 SHUTTER VOLUME............................................................................................... 216 SHUTTER SOUND ................................................................................................. 216 PLAYBACK VOLUME ............................................................................................ 216 SCREEN SETTING.......................................................................................217 VIEW MODE SETTING ........................................................................................ 217 EVF BRIGHTNESS................................................................................................... 217 EVF COLOR ............................................................................................................... 217 EVF COLOR ADJUSTMENT .............................................................................. 218 xviii Table of Contents LCD BRIGHTNESS.................................................................................................. 218 LCD COLOR .............................................................................................................. 218 LCD COLOR ADJUSTMENT ............................................................................. 218 IMAGE DISP............................................................................................................... 219 AUTOROTATE DISPLAYS ................................................................................... 219 PREVIEW EXP./WB IN MANUAL MODE..................................................... 220 NATURAL LIVE VIEW............................................................................................ 220 F-Log VIEW ASSIST............................................................................................... 221 FRAMING GUIDELINE......................................................................................... 221 AUTOROTATE PB ................................................................................................... 222 FOCUS SCALE UNITS .......................................................................................... 222 APERTURE UNIT FOR CINEMA LENS ......................................................... 222 DISP. CUSTOM SETTING.................................................................................... 222 LARGE INDICATORS MODE(EVF) ................................................................. 223 LARGE INDICATORS MODE(LCD) ................................................................ 223 LARGE INDICATORS DISP. SETTING............................................................ 224 INFORMATION CONTRAST ADJ. .................................................................. 224 x Q MENU BACKGROUND........................................................................... 225 F Q MENU BACKGROUND ........................................................................... 225 BUTTON/DIAL SETTING ..........................................................................226 FOCUS LEVER SETTING ..................................................................................... 226 x EDIT/SAVE QUICK MENU .......................................................................... 227 F EDIT/SAVE QUICK MENU .......................................................................... 227 FUNCTION (Fn) SETTING ................................................................................. 227 COMMAND DIAL SETTING ............................................................................. 228 SHUTTER AF ............................................................................................................ 229 SHUTTER AE ............................................................................................................ 229 SHOOT WITHOUT LENS .................................................................................... 230 SHOOT WITHOUT CARD .................................................................................. 230 FOCUS RING ............................................................................................................ 230 FOCUS RING OPERATION ................................................................................ 230 AE/AF-LOCK MODE............................................................................................. 231 AWB-LOCK MODE ................................................................................................ 231 APERTURE RING SETTING (A) ........................................................................ 231 APERTURE SETTING ............................................................................................ 232 TOUCH SCREEN SETTING ................................................................................ 232 xix POWER MANAGEMENT ..........................................................................234 AUTO POWER OFF ............................................................................................... 234 PERFORMANCE ..................................................................................................... 235 BOOST SETTING .................................................................................................... 235 SAVE DATA SETTING ................................................................................236 FRAME NO. ............................................................................................................... 236 SAVE ORG IMAGE ................................................................................................. 237 EDIT FILE NAME..................................................................................................... 237 SELECT FOLDER .................................................................................................... 238 COPYRIGHT INFO ................................................................................................. 238 CONNECTION SETTING ..........................................................................239 Bluetooth SETTINGS........................................................................................... 239 PC AUTO SAVE ....................................................................................................... 240 instax PRINTER CONNECTION SETTING ................................................. 241 CONNECTION MODE ......................................................................................... 242 USB POWER SUPPLY SETTING ...................................................................... 243 GENERAL SETTINGS ............................................................................................ 244 INFORMATION........................................................................................................ 244 RESET WIRELESS SETTING ............................................................................... 244 9 Shortcuts 245 Shortcut Options ......................................................................................246 MY MENU ....................................................................................................247 MY MENU SETTING ............................................................................................. 247 The Quick Menu ........................................................................................249 The Quick Menu Display ................................................................................. 249 Viewing and Changing Settings................................................................. 251 Editing the Quick Menu................................................................................... 252 Function Controls .....................................................................................255 The Function Buttons........................................................................................ 255 Touch-Function Gestures ............................................................................... 258 xx Table of Contents 10Peripherals and Optional Accessories 261 11Connections 279 Lenses ...........................................................................................................262 Lens Parts .................................................................................................................. 262 Removing Lens Caps ......................................................................................... 263 Attaching Lens Hoods ...................................................................................... 263 Lenses with Aperture Rings .......................................................................... 264 Lenses with No Aperture Rings .................................................................. 265 Lenses with O.I.S. Switches ............................................................................ 265 Manual Focus Lenses ........................................................................................ 266 Lens Care................................................................................................................... 267 External Flash Units .................................................................................268 Using an External Flash .................................................................................... 269 SYNC TERMINAL.................................................................................................... 270 SHOE MOUNT FLASH ........................................................................................ 271 COMMANDER(OPTICAL).................................................................................. 274 HDMI Output..............................................................................................280 Connecting to HDMI Devices ...................................................................... 280 Shooting.................................................................................................................... 281 Playback ..................................................................................................................... 281 Wireless Connections (Bluetooth®, Wireless LAN/Wi-Fi) ............282 Smartphones and Tablets: FUJIFILM Camera Remote .................. 282 Copying Pictures to a Computer: PC AutoSave ................................ 284 Connecting via USB .................................................................................285 Connecting to Computers ............................................................................. 285 Copying Pictures from a Memory Card to a Computer ............... 288 Using Your Camera as a Webcam (FUJIFILM X Webcam) ........... 288 Tethered Movie Recording ............................................................................ 289 Converting RAW Images (FUJIFILM X RAW STUDIO) ..................... 289 Backing up and Restoring Camera Settings (FUJIFILM X Acquire) ....................................................................................... 289 Connecting to Smartphones ....................................................................... 290 instax SHARE Printers ..............................................................................293 Establishing a Connection ............................................................................. 293 Printing Pictures.................................................................................................... 294 xxi Table of Contents 12Technical Notes 295 Accessories from Fujifilm .......................................................................296 Software for Use with Your Camera ...................................................298 FUJIFILM Camera Remote .............................................................................. 298 FUJIFILM PC AutoSave ...................................................................................... 298 RAW FILE CONVERTER EX powered by SILKYPIX .............................. 298 Capture One Express Fujifilm ....................................................................... 298 Capture One Pro Fujifilm ................................................................................. 299 FUJIFILM X Acquire ............................................................................................. 299 FUJIFILM X RAW STUDIO ................................................................................. 299 FUJIFILM X Webcam .......................................................................................... 299 For Your Safety ...........................................................................................300 Product Care...............................................................................................311 Cleaning the Image Sensor...................................................................312 Firmware Updates ....................................................................................313 Checking the Firmware Version .................................................................. 313 Troubleshooting .......................................................................................314 Warning Messages and Displays.........................................................323 Memory Card Capacity ...........................................................................327 Specifications .............................................................................................328 xxii Supplied Accessories The following are included with the camera: • NP-W126S rechargeable battery • Body cap (comes attached to camera) • USB cable (approx. 0.6 m/2 ft.) • Shoulder strap • Basic Manual O The battery is not charged at shipment. Charge the battery before use (P 33). N • If you purchased a lens kit, check that a lens is included. • For information on compatible computer software, see “Software for Use with Your Camera” (P 298). xxiii About This Manual This manual contains instructions for your FUJIFILM X-T30 II digital camera. Be sure you have read and understood its contents before proceeding. Symbols and Conventions The following symbols are used in this manual: O Information that should be read to prevent damage to the product. Additional information that may be helpful when using the N product. P Pages on which related information may be found. Menus and other text in the displays are shown in bold. Illustrations are for explanatory purposes only; drawings may be simplified, while photographs are not necessarily taken with the model of camera described in this manual. Terminology The optional SD, SDHC, and SDXC memory cards the camera uses to store pictures are referred to as “memory cards”. The electronic viewfinder may be referred to as the “EVF” and the LCD monitor as the “LCD”. Smartphones and tablets are referred to as “smartphones”. xxiv Before You Begin 1 Parts of the Camera The parts of the camera are listed below. 1 Before You Begin A Exposure compensation dial.................. 5, 77 M Microphone ............................................ 49, 178 B Shutter button .................................................43 N AF-assist illuminator...................................132 Self-timer lamp ............................................145 C Auto mode selector lever ................................6 Tally light ........................................................166 D Shutter speed dial .................................................4, 54, 56, 59, 60 O Front command dial................................7,228 E Hot shoe .........................................................269 P ON/OFF switch .................................................35 F Drive dial .............................................................5 Q Fn1 button .....................................................255 G N (flash pop-up) lever...................................98 R Flash ...................................................................98 H Strap clip............................................................28 S Body cap............................................................29 T Microphone/remote release connector I Connector cover (⌀2.5 mm) .....................................49, 58, 157 J Focus mode selector ......................................65 U USB connector (Type-C) ..................... 33, 285 K Lens signal contacts L Lens release button ........................................29 V HDMI Micro connector (Type D) .............280 O V Use an HDMI cable no more than 1.5 m (4.9 ft.) long. 2 Parts of the Camera 1 Before You Begin W b (delete) button ...........................................45 X a (playback) button ...................................44 Y Diopter adjustment control ...........................9 Z Electronic viewfinder (EVF) ..................................................... 10, 14, 16, 21 i DISP (display)/BACK button ............... 16, 185 j Cable channel cover for DC coupler .......296 k Battery-chamber cover .................................30 l Battery-chamber cover latch ......................30 m Serial number plate......................... see below n Tripod mount o Speaker .................................................... 51, 216 p LCD monitor ............................9, 12, 14, 16, 22 a VIEW MODE button .........................................14 b AE-L (exposure lock) button ............... 83, 255 c Rear command dial ................................7, 187 Touch screen ........................21, 139, 175, 232 d AF-L (focus lock) button ...................... 83, 255 e Indicator lamp ...................................................8 q Eye sensor..........................................................15 Tally light ........................................................166 r Battery latch .....................................................31 f Q (quick menu) button ...............................249 s Battery chamber .............................................30 g Focus stick (focus lever)...................4, 70, 226 t Memory card slot............................................30 h MENU/OK button .............................................19 O m Do not remove the serial number plate, which provides the CMIIT ID, serial number, and other important information. 3 The Focus Stick (Focus Lever) Tilt or press the focus stick to select the focus area. The focus stick can also be used to navigate the menus. 1 Before You Begin N Use D BUTTON/DIAL SETTING > FOCUS LEVER SETTING to choose the role played by the focus stick (P 226). The Shutter Speed Dial The shutter speed dial is used to choose the shutter speed. 4 Parts of the Camera The Drive Dial Rotate the dial to choose from the following the drive modes. 1 F BKT1 BKT2 CH CL Movie Bracketing High-speed burst Low-speed burst P 48 Mode Single frame S Adv.1 Advanced filter 84 Adv.2 89 j Multiple exposure 89 u Panorama P 42 96 94 91 The Exposure Compensation Dial Rotate the dial to choose an exposure compensation amount. 5 Before You Begin Mode The Auto Mode Selector Lever Switch between auto and manual modes. 1 Before You Begin Position Mode Select from P (program AE), S (shutter-priority AE), A (aperture-priority AE), and M (manual) modes (P 54, 56, 59, 60). Adjust shutter speed and aperture using program shift (mode P) or set shutter speed and/or aperture manually (modes S, A, and M). Auto mode. The camera adjusts settings automatically according to the option selected by rotating the front command dial. Choose from modes suited to specific subject types, or select AUTO to let the camera automatically match the mode to the subject (P 61). Scene selection is not available in drive modes Adv.1, Adv.2, j, and u. N Restrictions may apply to camera settings depending on the mode and shooting conditions. 6 Parts of the Camera The Command Dials Rotate or press the command dials to: Front command dial Rear command dial 1 Rotate through menus • Adjust aperture 1, 2 • Choose a scene (auto mode) 4 • Adjust exposure compensation • Adjust sensitivity 2 • View other pictures during playback • Switch back and forth between Press aperture and exposure compensation 2, 5 • Press and hold to choose the option selected for D BUTTON/ DIAL SETTING > COMMAND DIAL SETTING in the D (setup) menu • Highlight menu items • Choose the desired combination of shutter speed and aperture (program shift) • Choose a shutter speed 2 • Adjust settings in the quick menu • Choose the size of the focus frame • Zoom in or out in full frame playback • Zoom in or out in multi-frame playback • Zoom in on the active focus point 3 • Press and hold to choose the3 manual focus mode focus display • Zoom in on the active focus point during playback 1 Aperture set to A (auto) and lens equipped with aperture ring or COMMAND selected for D BUTTON/DIAL SETTING > APERTURE RING SETTING (A). 2 Can be changed using D BUTTON/DIAL SETTING > COMMAND DIAL SETTING. 3 Available only if FOCUS CHECK is assigned to a function button. 4 Exposure compensation dial rotated to C. 5 Can be used to switch back and forth between aperture, sensitivity, and exposure compensation when exposure compensation dial is rotated to C. 7 Before You Begin • Select menu tabs or page The Indicator Lamp Camera status is shown by the indicator lamp. 1 Before You Begin Indicator lamp Glows green Blinks green Blinks green and orange Glows orange Blinks orange Blinks red Camera status Focus locked. Focus or slow shutter speed warning. Pictures can be taken. • Camera on: Recording pictures, or picture displayed for confirmation after being taken with option other than OFF selected for D SCREEN SET-UP > IMAGE DISP. (additional pictures can be taken). • Camera off: Uploading pictures to a smartphone or tablet. * Recording pictures. No additional pictures can be taken at this time. Flash charging; flash will not fire when picture is taken. Lens or memory error. * Displayed only if pictures are selected for upload. N • Warnings may also appear in the display. • The indicator lamp remains off while your eye is to the viewfinder. • The B MOVIE SETTING > TALLY LIGHT option can be used to choose the lamp (indicator or AF-assist) that lights during movie recording and whether the lamp blinks or remains steady. 8 Parts of the Camera The LCD Monitor The LCD monitor can be tilted for easier viewing, but be careful not to touch the wires or trap fingers or other objects behind the monitor. Touching the wires could cause camera malfunction. 1 • Touch photography (P 22) • Focus area selection (P 21) • Function selection (P 24) • Movie optimized control oL (P 23) • Playback (P 25) Focusing the Viewfinder If the indicators displayed in the viewfinder are blurred, put your eye to the viewfinder and rotate the diopter adjustment control until the display is in sharp focus. 9 Before You Begin N The LCD monitor also functions as a touch screen that can be used for: Camera Displays This section lists the indicators that may be displayed during shooting. O For illustrative purposes, displays are shown with all indicators lit. The Electronic Viewfinder 1 Before You Begin A B CD EF G H I J K L M NO 3 2 P 1 0 z Q R y x w v u t s S 5 4 3 2 1 0 -1 -2 -3 -4 -5 r qp o 10 T U V W X Y n m l k j i hg f e dcba Z Camera Displays A Crop factor .....................................................144 B Focus check ............................................ 76, 136 C Depth-of-field preview...........................59, 75 D Location data download status.....244, 282 E Bluetooth ON/OFF.......................................239 F Image transfer status ........................239, 282 G Movie mode ........................................... 48, 158 H Full HD high-speed recording ..................160 I Recording time available/ 1 Shows “9999” if there is space for over 9999 frames. 2 Not displayed when ON is selected for D SCREEN SET-UP > LARGE INDICATORS MODE(EVF). 11 1 Before You Begin J K L M N O P Q R S T U V W X Y Z a b elapsed recording time ..............................48 Date and time..................................37, 39, 211 Number of available frames 1...................327 Image size ......................................................104 File format......................................................159 Image quality................................................105 Temperature warning ................................326 Touch screen mode .....................21, 139, 175 White balance ..............................................109 AWB lock ........................................................231 Film simulation ............................................106 F-Log recording ............................................161 Dynamic range ............................................113 D-range priority ...........................................114 Movie optimized control ..............................23 Sound and flash indicator ........................213 Virtual horizon.................................................18 Boost mode ...................................................235 Histogram .........................................................18 Distance indicator 2 ........................................75 c Power supply....................................................34 d Battery level ......................................................36 e Sensitivity ..........................................................79 f Exposure compensation ...............................77 g Focus frame ...............................................69, 82 h Aperture...............................................55, 59, 60 i Time code.......................................................181 j Shutter speed .....................................55, 56, 60 k TTL lock ..................................................153, 257 l AE lock...................................................... 83, 231 m Metering ............................................................81 n Shooting mode ...............................................54 o Focus mode 2 ....................................................65 p Focus indicator 2 ..............................................66 q Manual focus indicator 2 .......................65, 73 r AF lock...................................................... 83, 231 s Mic jack setting ............................................179 t Recording level 2 ...........................................178 u AF+MF indicator 2 .......................................135 v Shutter type ...................................................148 w Continuous mode...........................................89 x Exposure indicator...................................60, 77 y Self-timer indicator .....................................145 z Microphone ......................................................49 0 Remote release ................................................58 1 Flash (TTL) mode .........................................271 2 IS mode 2 .........................................................150 3 Flash compensation ...................................271 The LCD Monitor I J A BC D E F G H N K L M O P Q R 3 1 S Before You Begin 2 1 0 T U V z y W X x Y w v u t Z 12800 on s r q p 12 ml k j i h g f e dcba Camera Displays elapsed recording time ..............................48 M Number of available frames 1...................327 N Image size ......................................................104 O File format......................................................159 P Image quality................................................105 Q Date and time..................................37, 39, 211 R Touch screen mode 3 ...................21, 139, 175 S AWB lock ........................................................231 T White balance ..............................................109 U Film simulation ............................................106 V F-Log recording ............................................161 W Dynamic range ............................................113 X D-range priority ...........................................114 Y Movie optimized control ..............................23 Z Boost mode ...................................................235 a Temperature warning ................................326 b Sound and flash indicator ........................213 c Power supply....................................................34 d Battery level ......................................................36 e Distance indicator 2 ........................................75 f Sensitivity ..........................................................79 g Histogram .........................................................18 h Exposure compensation ...............................77 i Aperture...............................................55, 59, 60 j Time code.......................................................181 k Shutter speed .....................................55, 56, 60 l TTL lock ..................................................153, 257 m AE lock...................................................... 83, 231 n Metering ............................................................81 o Shooting mode ...............................................54 p Focus mode 2 ....................................................65 q Focus indicator 2 ..............................................66 r Manual focus indicator 2 .......................65, 73 s AF lock...................................................... 83, 231 t Mic jack setting ............................................179 u AF+MF indicator 2 .......................................135 v Shutter type ...................................................148 w Recording level 2 ...........................................178 x Continuous mode...........................................89 y Exposure indicator...................................60, 77 z Self-timer indicator .....................................145 0 Microphone ......................................................49 1 Remote release ................................................58 2 Flash (TTL) mode .........................................271 3 IS mode 2 .........................................................150 1 Shows “9999” if there is space for over 9999 frames. 2 Not displayed when ON is selected for D SCREEN SET-UP > LARGE INDICATORS MODE(LCD). 3 Camera functions can also be accessed via touch controls. 13 1 Before You Begin A Crop factor .....................................................144 B Flash compensation ...................................271 C Focus check ............................................ 76, 136 D Depth-of-field preview...........................59, 75 E Location data download status.....244, 282 F Virtual horizon.................................................18 G Bluetooth ON/OFF.......................................239 H Image transfer status ........................239, 282 I Movie mode ........................................... 48, 158 J Full HD high-speed recording ..................160 K Focus frame ...............................................69, 82 L Recording time available/ Adjusting Display Brightness The brightness and saturation of the viewfinder and LCD monitor can be adjusted using the items in the D SCREEN SET-UP menu. Choose EVF BRIGHTNESS or EVF COLOR to adjust viewfinder brightness or saturation, LCD BRIGHTNESS or LCD COLOR to do the same for the LCD monitor. 1 Before You Begin Display Rotation When ON is selected for D SCREEN SET-UP > AUTOROTATE DISPLAYS, the indicators in the viewfinder and LCD monitor automatically rotate to match camera orientation. Choosing a Display Mode Press the VIEW MODE button to cycle through the following display modes. You can choose separate display modes for shooting and playback. SHOOTING Option E EYE SENSOR LCD ONLY EVF ONLY EVF ONLY + E 14 Description Putting your eye to the viewfinder turns the viewfinder on and the LCD monitor off ; taking your eye away turns the viewfinder off and LCD monitor on. LCD monitor on, viewfinder off. Viewfinder on, LCD monitor off. Putting your eye to the viewfinder turns the viewfinder on; taking it away turns the viewfinder off. The LCD monitor remains off. Camera Displays Option E EYE SENSOR + LCD IMAGE DISP. Description Putting your eye to the viewfinder during shooting turns the viewfinder on, but the LCD monitor is used for the display of images once you remove your eye from the viewfinder after shooting. The options selected for D SCREEN SET-UP > IMAGE DISP. apply to display in the LCD monitor. 1 Option E EYE SENSOR LCD ONLY EVF ONLY Description Putting your eye to the viewfinder turns the viewfinder on and the LCD monitor off ; taking your eye away turns the viewfinder off and LCD monitor on. LCD monitor on, viewfinder off. Viewfinder on, LCD monitor off. N Displays modes for the EVF and LCD monitor can also be selected using D SCREEN SET-UP > VIEW MODE SETTING in the setup menu (P 217). The Eye Sensor The eye sensor may respond to objects other than your eye or to light shining directly on the sensor. Eye sensor 15 Before You Begin PLAYBACK The DISP/BACK Button The DISP/BACK button controls the display of indicators in the viewfinder and LCD monitor. N Indicators for the EVF and LCD must be selected separately. To choose the EVF display, place your eye to the viewfinder while using the DISP/BACK button. 1 Before You Begin Viewfinder (EVF) Standard indicators Full screen (no indicators) 1000 LCD Monitor Standard indicators No indicators Info display (still photography only) 16 Camera Displays Customizing the Standard Display To choose the items shown in the standard indicator display: Display standard indicators. Use the DISP/BACK button to display standard indicators. 2 Select DISP. CUSTOM SETTING. Select D SCREEN SET-UP > DISP. CUSTOM SETTING in the setup menu. 3 Choose items. Highlight items and press MENU/OK to select or deselect. Item FRAMING GUIDELINE ELECTRONIC LEVEL FOCUS FRAME AF DISTANCE INDICATOR MF DISTANCE INDICATOR HISTOGRAM LIVE VIEW HIGHLIGHT ALERT SHOOTING MODE APERTURE/S-SPEED/ISO INFORMATION BACKGROUND Expo. Comp. (Digit) Expo. Comp. (Scale) FOCUS MODE PHOTOMETRY SHUTTER TYPE FLASH 4 5 Default R R R R R R R R R R R R R R R R Item CONTINUOUS MODE DUAL IS MODE TOUCH SCREEN MODE WHITE BALANCE FILM SIMULATION DYNAMIC RANGE BOOST MODE FRAMES REMAINING IMAGE SIZE/QUALITY MOVIE MODE & REC. TIME IMAGE TRANSFER ORDER MIC LEVEL GUIDANCE MESSAGE BATTERY LEVEL FRAMING OUTLINE Default R R R R R R R R R R R R R R R Press DISP/BACK to save changes. Press DISP/BACK as needed to exit the menus and return to the shooting display. 17 1 Before You Begin 1 Camera Displays 1 Virtual Horizon Selecting ELECTRONIC LEVEL displays a virtual horizon. The camera is level when the two lines overlap. Note that the virtual horizon may not be displayed if the camera lens is pointed up or down. For a 3D display (shown), press the function button to which ELECTRONIC LEVEL is assigned (P 255). Pitch Roll Before You Begin Framing Outline Enable FRAMING OUTLINE to make the borders of the frame easier to see against dark backgrounds. Histograms Histograms show the distribution of tones in the image. Brightness is shown by the horizontal axis, the number of pixels by the vertical axis. Number of pixels Shadows Highlights Pixel brightness • Optimal exposure: Pixels are distributed in an even curve throughout the tone range. • Overexposed: Pixels are clustered on the right side of the graph. • Underexposed: Pixels are clustered on the left side of the graph. To view separate RGB histograms and a display showing areas of the frame that will be overexposed at current settings superimposed on the view through the lens, press the function button to which HISTOGRAM is assigned (P 255). A Overexposed areas blink B RGB histograms 18 Using the Menus To display the menus, press MENU/OK. 1 IMAGE QUALITY SETTING IMAGE SIZE IMAGE QUALITY RAW RECORDING FILM SIMULATION MONOCHROMATIC COLOR GRAIN EFFECT COLOR CHROME EFFECT COLOR CHROME FX BLUE EXIT Shooting Still photography: Drive dial rotated to position other than F (movie) MOVIE SETTING MOVIE MODE FILE FORMAT FULL HD HIGH SPEED REC FIX MOVIE CROP MAGNIFICATION F-Log RECORDING 4K MOVIE OUTPUT FULL HD MOVIE OUTPUT HDMI OUTPUT INFO DISPLAY EXIT Movie recording: Drive dial rotated to F (movie) PLAY BACK MENU RAW CONVERSION ERASE CROP RESIZE PROTECT IMAGE ROTATE RED EYE REMOVAL VOICE MEMO SETTING Playback EXIT During playback 19 Before You Begin The Menus Different menus are displayed during still photography, movie recording, and playback. Using the Menus Selecting a Menu Tab To navigate the menus: 1 Press MENU/OK to display the menus. 1 Before You Begin IMAGE QUALITY SETTING IMAGE SIZE IMAGE QUALITY RAW RECORDING FILM SIMULATION MONOCHROMATIC COLOR GRAIN EFFECT COLOR CHROME EFFECT COLOR CHROME FX BLUE EXIT 2 Press the focus stick (focus lever) left to highlight the tab for the current menu. IMAGE QUALITY SETTING IMAGE SIZE IMAGE QUALITY RAW RECORDING FILM SIMULATION MONOCHROMATIC COLOR GRAIN EFFECT COLOR CHROME EFFECT COLOR CHROME FX BLUE EXIT Tab 3 Press the focus stick up or down to highlight the tab containing the desired item. 4 Press the focus stick right to place the cursor in the menu. N Use the front command dial to select menu tabs or page through menus and the rear command dial to highlight menu items. 20 Touch Screen Mode The LCD monitor also functions as a touch screen. TOUCH SCREEN SETTINGS TOUCH SCREEN SETTING DOUBLE TAP SETTING ON TOUCH FUNCTION TOUCH SCREENOFF SETTING EVF TOUCH SCREEN AREA SETTINGS EVF The LCD monitor can be used to select the focus area while pictures are being framed in the electronic viewfinder (EVF). Use D BUTTON/DIAL SETTING > TOUCH SCREEN SETTING > EVF TOUCH SCREEN AREA SETTINGS to choose the area of the monitor employed for touch controls. N When FACE DETECTION ON is selected for G AF/MF SETTING > FACE/EYE DETECTION SETTING, you can choose the face used for focus. 21 1 Before You Begin Shooting Touch Controls To enable touch controls, select ON for D BUTTON/DIAL SETTING > TOUCH SCREEN SETTING > x TOUCH SCREEN SETTING. LCD Monitor The operation performed can be selected by tapping the touch screen mode indicator in the display. Touch controls can be used for the following operations: 1 Mode Description Before You Begin Tap your subject in the display to focus and release the shutter. TOUCH In burst mode, pictures will be taken while you keep your finger SHOOTING on the display. • In focus mode S (AF-S), the camera focuses when you tap your AF AF OFF subject in the display. Focus locks at the current distance until you tap the AF OFF icon. • In focus mode C (AF-C), the camera initiates focus when you tap your subject display. The camera will continue to adjust focus for changes in the distance to the subject until you tap the AF OFF icon. • In manual focus mode (MF), you can tap the display to focus on the selected subject using autofocus. AREA Tap to select a point for focus or zoom. The focus frame will move to the selected point. OFF Touch controls disabled. O Different touch controls are used during focus zoom (P 140). N • To disable touch controls and hide the touch screen mode indicator, select OFF for D BUTTON/DIAL SETTING > TOUCH SCREEN SETTING > x TOUCH SCREEN SETTING. • Touch control settings can be adjusted using G AF/MF SETTING > xF TOUCH SCREEN MODE. For information on the touch controls available during movie recording, see “Movie Recording (xF TOUCH SCREEN MODE; P 175)”. 22 Touch Screen Mode N • Enabling movie-optimized controls disables the aperture ring. • When movie-optimized control is enabled, the movie-optimized mode button can be used to change shooting settings or disable movie-optimized control. 23 1 Before You Begin MOVIE OPTIMIZED CONTROL oL Selecting ON for B MOVIE SETTING > MOVIE OPTIMIZED CONTROL oL or tapping the movie-optimized mode button in the shooting display optimizes the command dials and touch controls for movie recording. This can be used to preMovie-optimized vent camera sounds being recorded with mode button movie footage. • SHUTTER SPEED • WIND FILTER • APERTURE • HEADPHONES VOLUME • EXPOSURE COMPENSATION • F FILM SIMULATION • ISO • F WHITE BALANCE • INTERNAL MIC LEVEL ADJUSTMENT/EXTERNAL MIC LEVEL ADJUSTMENT 1 Before You Begin Touch Function Functions can be assigned to the following flick gestures in much the same way as function buttons (P 258): • Flick up: T-Fn1 • Flick left: T-Fn2 • Flick right: T-Fn3 • Flick down: T-Fn4 N • In some cases, touch-function flick gestures display a menu; tap to select the desired option. • Touch-function gestures are disabled by default. To enable touch-function gestures, select ON for D BUTTON/DIAL SETTING > TOUCH SCREEN SETTING > c TOUCH FUNCTION. 24 INTERNAL MIC LEVEL ADJUSTMENT SET CANCEL Touch Screen Mode Playback Touch Controls When ON is selected for D BUTTON/DIAL SETTING > TOUCH SCREEN SETTING > a TOUCH SCREEN SETTING, touch controls can be used for the following playback operations: • Swipe: Swipe a finger across the display to view other images. 1 Before You Begin • Pinch-out: Place two fingers on the display and spread them apart to zoom in. • Pinch-in: Place two fingers on the display and slide them together to zoom out. N Pictures can be zoomed out until the entire image is visible but no further. • Double-tap: Tap the display twice to zoom in on the focus point. • Drag: View other areas of the image during playback zoom. 25 MEMO 26 First Steps 27 Attaching the Strap Attach the strap. Attach the strap to the two strap clips as shown below. 2 First Steps O To avoid dropping the camera, be sure the strap is correctly secured. 28 Attaching a Lens The camera can be used with lenses for the FUJIFILM X-mount. Remove the body cap from the camera and the rear cap from the lens. Place the lens on mount, keeping the marks on the lens and camera aligned (A), and then rotate the lens until it clicks into place (B). 2 not enter the camera. • Be careful not to touch the camera’s internal parts. • Rotate the lens until it clicks securely into place. • Do not press the lens release button while attaching the lens. Removing Lenses To remove the lens, turn the camera off, then press the lens release button (A) and rotate the lens as shown (B). O To prevent dust accumulating on the lens or inside the camera, replace the lens caps and camera body cap when the lens is not attached. Lenses and Other Optional Accessories The camera can be used with lenses and accessories for the FUJIFILM X-mount. O Observe the following precautions when attaching or removing (exchanging) lenses. • Check that the lenses are free of dust and other foreign matter. • Do not change lenses in direct sunlight or under another bright light source. Light focused into the interior of the camera could cause it to malfunction. • Attach the lens caps before exchanging lenses. 29 First Steps O • When attaching lenses, ensure that dust or other foreign matter does Inserting the Battery and a Memory Card Insert the battery and memory card as described below. 1 Slide the battery-chamber latch as shown and open the battery-chamber cover. 2 Insert the battery. Using the battery to keep the battery latch pressed to one side, insert the battery contacts first in the direction shown by the arrow. 3 Insert the memory card. 2 First Steps N The optional SD, SDHC, and SDXC memory cards the camera uses to store pictures are referred to as “memory cards”. 4 30 Close the battery-chamber cover and slide the battery-chamber cover latch closed. Inserting the Battery and a Memory Card Removing the Battery Before removing the battery or memory card, turn the camera off and open the battery-chamber cover. To remove the battery, press the battery latch to the side, and slide the battery out of the camera as shown. ments. Observe caution when removing the battery. Removing Memory Cards To remove the memory card, press it in and release it slowly. The card can then be removed by hand. O • Press the center of the card when ejecting it. • When a memory card is removed, the card could be ejected too quickly. Use your finger to hold it and gently release the card. 31 2 First Steps O The battery may become hot when used in high-temperature environ- Inserting the Battery and a Memory Card 2 Compatible Memory Cards • The camera can be used with SD, SDHC, and SDXC memory cards. • The camera supports UHS-I memory cards. • To record movies, use cards with a UHS speed class of 3 or better or a video speed class of V30 or better. • A list of supported memory cards is available on the Fujifilm website. For details, visit: https://fujifilm-x.com/support/compatibility/cameras/. First Steps O • Do not turn the camera off or remove the memory card while the memory card is being formatted or data are being recorded to or deleted from the card. Failure to observe this precaution could damage the card. • Memory cards can be locked, making it impossible to format the card or to record or delete images. Before inserting a memory card, slide the write-protect switch to the unlocked position. • Memory cards are small and can be swallowed; keep out of reach of children. If a child swallows a memory card, seek medical assistance immediately. • miniSD or microSD adapters that are larger or smaller than memory cards may not eject normally; if the card does not eject, take the camera to an authorized service representative. Do not forcibly remove the card. • Do not affix labels or other objects to memory cards. Peeling labels can cause camera malfunction. • Movie recording may be interrupted with some types of memory card. • Formatting a memory card in the camera creates a folder in which pictures are stored. Do not rename or delete this folder or use a computer or other device to edit, delete, or rename image files. Always use the camera to delete pictures; before editing or renaming files, copy them to a computer and edit or rename the copies, not the originals. Renaming the files on the camera can cause problems during playback. 32 Charging the Battery The battery is not charged at shipment. Charge the battery before use. O • An NP-W126S rechargeable battery is supplied with the camera. • Turn the camera off for charging. • The camera can be charged via USB. USB charging is available with computers with a manufacturer-approved operating system and USB interface. 2 First Steps Leave the computer on during charging. O • The battery will not charge while the camera is on. • Connect the supplied USB cable. • Connect the camera directly to the computer; do not use a USB hub or keyboard. • Charging stops if the computer enters sleep mode. To resume charging, activate the computer and disconnect and reconnect the USB cable. • Charging may not be supported depending on the model of computer, computer settings, and the computer’s current state. • The battery takes about 5 hours to charge with a charging input of 5 V/500 mA. • To charge the battery from a household AC power outlet, use a BC-W126S battery charger (available separately). 33 Charging the Battery Charge Status The indicator lamp shows battery charge status as follows: Indicator lamp On Off Blinks 2 Battery status Battery charging. Charging complete. Charging error. O • Do not affix labels or other objects to the battery. Failure to observe First Steps this precaution could make it impossible to remove the battery from the camera. • Do not short the battery terminals. The battery could overheat. • Read the cautions in “The Battery and Power Supply”. • Use only genuine Fujifilm rechargeable batteries designated for use in this camera. Failure to observe this precaution could result in product malfunction. • Do not remove the labels from the battery or attempt to split or peel the outer casing. • The battery gradually loses its charge when not in use. Charge the battery one or two days before use. • If the battery fails to hold a charge, it has reached the end of its charging life and must be replaced. • Remove dirt from the battery terminals with a clean, dry cloth. Failure to observe this precaution could prevent the battery from charging. • Note that charging times increase at low or high temperatures. N • If the camera is turned on during charging, charging will end and the USB connection will instead be used to power the camera. The battery level will begin to gradually decline (P 243). • The camera will display a “power supply” icon when powered via USB. 34 Turning the Camera On and Off Use the ON/OFF switch to turn the camera on and off. Slide the switch to ON to turn the camera on, or to OFF to turn the camera off. tures or the view through the viewfinder. Keep the lens and viewfinder clean. N • Pressing the a button during shooting starts playback. • Press the shutter button halfway to return to shooting mode. • The camera will turn off automatically if no operations are performed for the length of time selected for D POWER MANAGEMENT > AUTO POWER OFF. To reactivate the camera after it has turned off automatically, press the shutter button halfway or turn the ON/OFF switch to OFF and then back to ON. 35 2 First Steps O Fingerprints and other marks on the lens or viewfinder can affect pic- Checking the Battery Level After turning the camera on, check the battery level in the display. Battery level is shown as follows: 2 First Steps Indicator e f g h i i (red) j (blinks red) 36 Description Battery partially discharged. Battery about 80% full. Battery about 60% full. Battery about 40% full. Battery about 20% full. Low battery. Charge as soon as possible. Battery exhausted. Turn camera off and recharge battery. Basic Setup When you turn the camera on for the first time, you can choose a language and set the camera clock. At default settings, you can also pair the camera with a smartphone or tablet so that you can later synchronize the clocks or download pictures. Follow the steps below when turning the camera on for the first time. N If you intend to pair the camera with a smartphone or tablet, install and 1 Turn the camera on. A language-selection dialog will be displayed. 2 Choose a language. Highlight a language and press MENU/OK. 3 Pair the camera with the smartphone or tablet. Press MENU/OK to pair the camera with a smartphone or tablet running the FUJIFILM Camera Remote app. PAIRING REGISTRATION PAIR WITH SMARTPHONE? N To skip pairing, press DISP/BACK. IMAGES CAN BE EASILY TRANSFERRED TO SMARTPHONE BY PAIRING SCAN QR CODE OR SEARCH FOR "FUJIFILM Camera Remote" APP ON THE WEB SET SKIP HELP 37 2 First Steps launch the latest version of the FUJIFILM Camera Remote App on the smart device before proceeding. For more information, visit: http://app.fujifilm-dsc.com/en/camera_remote/ 4 Check the time. When pairing is complete, you will be prompted to set the camera clock to the time reported by the smartphone or tablet. Check that the time is correct. PAIRING REGISTRATION PAIRING COMPLETE 12/31/2020 12:10 AM SET DATE/TIME FROM SMARTPHONE? SET CANCEL N To set the clock manually, press DISP/BACK (P 39). 2 5 First Steps Synchronize the camera settings with the settings configured on your smartphone or tablet. SMARTPHONE SYNC. SETTING LOCATION&TIME LOCATION TIME OFF SET N The option selected can be changed at any time using D CONNECTION SETTING > Bluetooth SETTINGS. 6 Set the clock. Press MENU/OK to set the camera clock to the time reported by the smartphone or tablet and exit to shooting mode. 7 Format the memory card (P 210). O Format memory cards before first use, and be sure to reformat all memory cards after using them in a computer or other device. N If the battery is removed for an extended period, the camera clock will be reset and the language-selection dialog will be displayed when the camera is turned on. Skipping the Current Step If you skip a step, a confirmation dialog will be displayed; select NO to avoid repeating any steps you skipped the next time the camera is turned on. 38 Basic Setup Choosing a Different Language To change the language: 1 Display language options. Select D USER SETTING > Qa. 2 Choose a language. Highlight the desired option and press MENU/OK. Changing the Time and Date To set the camera clock: 2 First Steps 1 Display DATE/TIME options. Select D USER SETTING > DATE/TIME. 2 Set the clock. Press the focus stick (focus lever) left or right to highlight the year, month, day, hour, or minute and press up or down to change. Press MENU/OK to set the clock. 39 MEMO 40 Basic Photography and Playback 41 Taking Photographs This section explains basic photography. 1 Rotate the drive dial to S (single frame). 2 Rotate the auto mode selector lever to w. 3 Ready the camera. • Hold the camera steady with both hands—shaking or unsteady hands can blur your shots. 3 Basic Photography and Playback • To prevent pictures that are out of focus or too dark (underexposed), keep your fingers and other objects away from the lens and AF-assist illuminator. 42 Taking Photographs 4 Frame the picture. 5 Press the shutter button halfway to set focus and exposure. Lenses with Zoom Rings Use the zoom ring to frame the picture in the display. Rotate the ring left to zoom out, right to zoom in. 3 Focus frame • If the camera is able to focus, it will beep twice and focus frame and focus indicator will glow green. • If the camera is unable to focus, the focus frame will turn red, s will be displayed, and the focus indicator will blink white. N • If the subject is poorly lit, the AF-assist illuminator may light to assist the focus operation. • Focus and exposure will lock when the shutter button is pressed halfway. Focus and exposure remain locked while the button is kept in this position (AF/AE lock). • The camera will focus on subjects at any distance in the macro and standard focus ranges for the lens. 6 Smoothly press the shutter button the rest of the way down to take the picture. 43 Basic Photography and Playback Focus indicator Viewing Pictures Pictures can be viewed in the viewfinder or LCD monitor. To view pictures full frame, press a. 100-0001 3 Basic Photography and Playback Press the focus stick (focus lever) left to page through pictures in reverse order. Press it right to page through pictures in the order recorded. Keep the stick pressed to scroll rapidly to the desired frame. N • You can also page through pictures using the front command dial or swipe gestures. • Pictures taken using other cameras are marked with a m (“gift image”) icon to warn that they may not display correctly and that playback zoom may not be available. 44 Deleting Pictures Use the b (delete) button to delete pictures. O Deleted pictures cannot be recovered. Protect important pictures or copy them to a computer or other storage device before proceeding. 1 With a picture displayed full frame, press the b button and select FRAME. ERASE FRAME SELECTED FRAMES ALL FRAMES 3 Choose a picture and press MENU/OK to delete it. • The picture will be deleted when the MENU/OK button is pressed; a confirmation dialog is not displayed. Be careful not to accidentally delete pictures you wish to keep. • Additional pictures can be deleted using the MENU/OK button. Display the desired pictures and press MENU/OK to delete them one by one. N • Protected pictures cannot be deleted. Remove protection from any pictures you wish to delete (P 196). • Pictures can also be deleted from the menus using the C PLAY BACK MENU > ERASE option (P 192). 45 Basic Photography and Playback 2 MEMO 46 Movie Recording and Playback 47 Recording Movies Record movies with sound. 1 Rotate the drive dial to F (movie). 2 Rotate the auto mode selector lever to w. 3 Press the shutter button to start recording. • A recording indicator (V) is displayed while recording is in progress. • The display shows the elapsed recording time. 4 Press the button again to end recording. Recording ends automatically when the movie reaches 29 minutes 59 seconds or the memory card is full. 4 Movie Recording and Playback Temperature Warnings The camera automatically turns off to protect itself when its temperature or the temperature of the battery rises. If a temperature warning is displayed, image noise may increase. Turn the camera off and wait for it to cool before turning it on again (P 326). 48 Recording Movies Using an External Microphone Sound can be recorded with external microphones that connect using jacks 2.5 mm in diameter; microphones that require plug-in power cannot be used. See the microphone manual for details. O • Use a memory card with a UHS speed class of 3 or better when recording movies. • Sound is recorded via the built-in microphone or an optional external microphone. Do not cover the microphone during recording. • Note that the microphone may pick up lens noise and other sounds made by the camera during recording. • Vertical or horizontal streaks may appear in movies containing very bright subjects. This is normal and does not indicate a malfunction. 49 4 Movie Recording and Playback N • The indicator lamp lights while recording is in progress (the B MOVIE SETTING > TALLY LIGHT option can be used to choose the lamp— indicator or AF-assist—that lights during movie recording and whether the lamp blinks or remains steady). • In the case of zoom lenses, zoom can be adjusted during recording using the zoom ring (if available). • If the lens is equipped with an aperture mode switch, select the aperture mode before beginning recording. If an option other than A is selected, shutter speed and aperture can be adjusted while recording is in progress. • While recording is in progress, you can: - Adjust sensitivity - Use the VIEW MODE button and the eye sensor to switch between the EVF and LCD monitor displays - Refocus using any of the following methods: • Press the shutter button halfway • Press a function button to which AF-ON is assigned • Use touch screen controls - Display a histogram or artificial horizon by pressing the button to which HISTOGRAM or ELECTRONIC LEVEL has been assigned Recording Movies N • Exposure compensation can be adjusted during recording, but only by a maximum of ±2 EV. • Recording may be unavailable at some settings, while in other cases settings may not apply during recording. choose the focus area for movie recording, select G AF/MF SETTING > F FOCUS AREA and use the focus stick (focus lever) and rear command dial (P 69). • To 4 Movie Recording and Playback Adjusting Movie Settings Movie settings can be adjusted from the movie menus or using the B MOVIE SETTING item in the photo menus (P 19). • Use the B MOVIE SETTING item in the photo menus to quickly adjust settings when recording movies via a button to which MOVIE RECORDING RELEASE has been assigned (P 155). • The movie menus contain options for use when recording movies via the shutter button while the drive dial is rotated to F (movie) (P 158). O Changes made using the B MOVIE SETTING item in the photo menus also apply to the movie menus. Changes made in one set of menus automatically apply in the other. Depth of Field To soften backgrounds, set aperture as wide as possible. Aperture can be adjusted manually at settings other than A. 50 Viewing Movies View movies on the camera. In full-frame playback, movies are identified by a W icon. Press the focus stick (focus lever) down to start movie playback. PLAY The following operations can be performed while a movie is displayed. 4 Left/right Playback in progress Playback paused (y (y) (x) End playback Pause playback Start/resume playback Single frame rewind/ View other pictures Adjust speed advance Progress is shown in the display during playback. 29m59s STOP PAUSE O • Do not cover the speaker during playback. • Sound is not played back if OFF is selected for D USER SETTING > SOUND & FLASH. N Press MENU/OK to pause playback and display volume controls. Press the focus stick (focus lever) up or down to adjust the volume; press MENU/OK again to resume playback. Volume can also be adjusted using D SOUND SET-UP > PLAYBACK VOLUME. 51 Movie Recording and Playback Focus stick Full-frame playback (focus lever) Up — Down Start playback Viewing Movies Playback Speed Press the focus stick (focus lever) left or right to adjust playback speed during playback. Speed is shown by the number of arrows (M or N). Arrows 4 Movie Recording and Playback 52 29m59s Taking Photographs 53 Choosing a Shooting Mode Modes P, S, A, and M can be selected via adjustments to shutter speed and/or aperture. In auto mode, you can let the camera adjust settings to suit the scene (AUTO) or choose the scene yourself. Mode P: Program AE Let the camera choose shutter speed and aperture for optimal exposure. Other values that produce the same exposure can be selected with program shift. 5 Taking Photographs Setting A Auto mode selector lever B Shutter speed C Aperture v A (auto) A (auto) Confirm that P appears in the display. O If the subject is outside the metering range of the camera, the shutter speed and aperture displays will show “– – –”. 54 Choosing a Shooting Mode Program Shift If desired, you can rotate the rear command dial to select other combinations of shutter speed and aperture without altering exposure (program shift). Aperture Shutter speed O Program shift is not available in any of the following circumstances: • With flash units that support TTL auto • When a flash mode other than D is selected for F FLASH SETTING > FLASH FUNCTION SETTING • When an auto option is selected for H IMAGE QUALITY SETTING > DYNAMIC RANGE • In movie mode N To cancel program shift, turn the camera off. 5 Taking Photographs 55 Mode S: Shutter-Priority AE Choose a shutter speed and let the camera adjust aperture for optimal exposure. Setting A Auto mode selector lever B Shutter speed C Aperture 5 v User-selected A (auto) Confirm that S appears in the display. Taking Photographs O • If the correct exposure cannot be achieved at the selected shutter speed, aperture will be displayed in red. • If the subject is outside the metering range of the camera, the aperture display will show “– – –”. N • At settings other than 180X, shutter speed can also be adjusted in increments of 1⁄3 EV by rotating the rear command dial. • Shutter speed can be adjusted while the shutter button is pressed halfway. 56 Choosing a Shooting Mode Time (T) Rotate the shutter speed dial to T (time) to choose slow shutter speeds for long time-exposures. Use of a tripod is recommended to prevent the camera moving during the exposure. 1 Rotate the shutter speed dial to T. 2 Rotate the rear command dial to choose a shutter speed. 5 Press the shutter button all the way down to take a picture at the selected shutter speed. At speeds of 1 s or slower, a count-down timer will be displayed while the exposure is in progress. N To reduce “noise” (mottling) in long time-exposures, select ON for H IMAGE QUALITY SETTING > LONG EXPOSURE NR. Note that this may increase the time needed to record images after shooting. 57 Taking Photographs 3 Bulb (B) Select a shutter speed of B (bulb) for long time-exposures in which you open and close the shutter manually. Use of a tripod is recommended to prevent the camera moving during the exposure. 5 1 Rotate the shutter speed dial to B. 2 Press the shutter button all the way down. The shutter will remain open for up to 60 minutes while the shutter button is pressed; the display shows the time elapsed since the exposure started. N • Selecting an aperture of A fixes shutter speed at 30 s. Taking Photographs • To reduce “noise” (mottling) in long time-exposures, select ON for H IMAGE QUALITY SETTING > LONG EXPOSURE NR. Note that this may increase the time needed to record images after shooting. Using a Remote Release A remote release can be used for long time-exposures. When using an optional RR-100 remote release or an electronic release from third-party suppliers, connect it to the camera’s remote release connector. NA confirmation dialog will be displayed when a remote release is connected; press MENU/OK and select n REMOTE for MIC/ REMOTE RELEASE. 58 CHECK MIC/REMOTE RELEASE SETTING SET SKIP Choosing a Shooting Mode Mode A: Aperture-Priority AE Choose an aperture and let the camera adjust shutter speed for optimal exposure. Setting A Auto mode selector lever B Shutter speed C Aperture v A (auto) Z (user-selected) Confirm that A appears in the display. shutter speed will be displayed in red. • If the subject is outside the metering range of the camera, the shutter speed display will show “– – –”. N • Rotate the lens aperture ring to adjust aperture. • Aperture can be adjusted even while the shutter button is pressed halfway. Previewing Depth of Field When PREVIEW DEPTH OF FIELD is assigned to a function button, pressing the button displays a L icon and stops aperture down to the selected setting, allowing depth of field to be previewed in the display (P 255). 59 5 Taking Photographs O • If the correct exposure cannot be achieved at the selected aperture, Mode M: Manual Exposure In manual mode, the user controls both shutter speed and aperture. Shots can be deliberately overexposed (brighter) or underexposed (darker), opening the door for a variety of individual creative expression. The amount the picture would be under- or over-exposed at current settings is shown by the exposure indicator; adjust shutter speed and aperture until the desired exposure is reached. Setting 5 Taking Photographs A Auto mode selector lever B Shutter speed C Aperture v User-selected Z (user-selected) Confirm that M appears in the display. N • Rotate the lens aperture ring to adjust aperture. • At settings other than 180X, shutter speed can also be adjusted in increments of 1⁄3 EV by rotating the rear command dial. Exposure Preview To preview exposure in the LCD monitor, select PREVIEW EXP./WB for D SCREEN SET-UP > PREVIEW EXP./WB IN MANUAL MODE. N Select an option other than PREVIEW EXP./WB when using the flash or on other occasions on which exposure may change when the picture is taken. 60 Choosing a Shooting Mode Auto Mode To take pictures in auto mode, rotate the auto mode selector lever to w and rotate the front command dial to choose a scene. Setting w S (single frame) Scene selection 5 Confirm that AUTO appears in the display. N You can also choose a scene using the A SHOOTING SETTING > SCENE POSITION item in the shooting menu. 61 Taking Photographs A Auto mode selector lever B Drive dial C Front command dial Choose from the following options: Mode 5 Taking Photographs Description The camera automatically optimizes settings to suit the AUTO scene (P 63). Choose for portraits. h PORTRAIT Processes portraits to give the subject a smooth, natuZ PORTRAIT ENHANCER ral-looking complexion. Choose for daylight shots of buildings and landscapes. M LANDSCAPE Choose when photographing moving subjects. N SPORT Choose for poorly lit twilight or night scenes. O NIGHT Choose this mode for slow shutter speeds when shootH NIGHT (TRIPOD) ing at night. Slow shutter speeds are used to capture the expanding p FIREWORKS burst of light from a firework. Choose this mode to record the vivid colors in sunrises Q SUNSET and sunsets. Choose for crisp, clear shots that capture the brightness R SNOW of scenes dominated by shining white snow. Choose for crisp, clear shots that capture the brightness s BEACH of sunlit beaches. Reduces the blue cast typically associated with underf UNDERWATER water lighting. Capture indoor background lighting under low-light U PARTY conditions. Effective for taking more vivid shots of flowers. V FLOWER Take clear pictures of text or drawings in print. W TEXT N Scene selection is available only when the drive dial is set to S, CH (highspeed burst), or CL (low-speed burst). 62 Choosing a Shooting Mode AUTO If AUTO is chosen via scene selection, the scene chosen by the camera will be shown by an icon in the display. C : LANDSCAPE d : NIGHT h : NIGHT (TRIPOD) e : MACRO Q : SUNSET x : SKY y : GREENERY h : PORTRAIT g : BACKLIT PORTRAIT c : MOVING OBJECT a : PORTRAIT&MOTION b : BACKLIT PORTRAIT&MOTION O • The mode selected may vary with the subject, and the camera may N No icon will be displayed if the camera is unable to determine the type of scene. 63 5 Taking Photographs select different scenes for the same subject depending on shooting conditions. If the mode and subject do not match, select a scene manually. • The additional processing time required in some scene modes may increase save times. Autofocus Take pictures using autofocus. 5 Taking Photographs 1 Rotate the auto mode selector lever to v (P 6). 2 Rotate the focus mode selector to S or C (P 65). 3 Use G AF/MF SETTING > AF MODE to choose an AF mode (P 67). 4 Select G AF/MF SETTING > FOCUS AREA and choose the position and size of the focus frame (P 69). 5 Take pictures. 64 Autofocus Focus Mode Use the focus mode selector to choose how the camera focuses. Choose from the following options: Mode S (AF-S) C (AF-C) M (manual) Description Single AF: Focus locks while the shutter button is pressed halfway. Choose for stationary subjects. Continuous AF: Focus is continually adjusted to reflect changes in the distance to the subject while the shutter button is pressed halfway. Use for subjects that are in motion. Manual: Focus manually using the lens focus ring. Choose for manual control of focus or in situations in which the camera is unable to focus using autofocus (P 73). the lens is in manual focus mode. • If ON is selected for G AF/MF SETTING > PRE-AF, focus will be adjusted continuously in modes S and C even when the shutter button is not pressed. 65 Taking Photographs N • Regardless of the option selected, manual focus will be used when 5 The Focus Indicator Focus status is shown by the focus indicator. Focus indicator Focus status ( ) Camera focusing. Subject in focus; focus locked (focus z (lights green) mode S). Subject in focus (focus mode C). (z) (lights green) Focus is automatically adjusted for Focus indicator changes in distance to subject. A (blinks white) Camera unable to focus. Manual focus (focus mode M). j 5 Taking Photographs 66 Autofocus Autofocus Options (AF Mode) Focus can be adapted to a variety of subjects by changing the combination of settings selected for focus and AF modes. 1 2 3 Press MENU/OK and go to the shooting menu. Select G AF/MF SETTING > AF MODE. Choose an AF mode. How the camera focuses depends on the focus mode. Focus Mode S (AF-S) Option Description Sample image Camera focuses on subject in selected focus point. Use for pinSINGLE POINT point focus on selected subject. r 5 z WIDE j ALL Taking Photographs y ZONE Camera focuses on subject in selected focus zone. Focus zones include multiple focus points, making it easier to focus on subjects in motion. Camera focuses automatically on high-contrast subjects; display shows areas in focus. Rotate the rear command dial in the focus-point selection display (P 70, 71) to cycle through AF modes in the following order: r SINGLE POINT, y ZONE, and z WIDE. 67 Focus Mode C (AF-C) Option Description Sample image Focus tracks subject at selected focus point. Use for subjects moving SINGLE POINT toward or away from camera. r y ZONE z TRACKING 5 Taking Photographs j ALL 68 Focus tracks subject in selected focus zone. Use for subjects that are moving fairly predictably. Focus tracks subjects moving through wide area of frame. Rotate the rear command dial in the focus-point selection display (P 70, 71) to cycle through AF modes in the following order: r SINGLE POINT, y ZONE, and z TRACKING. Autofocus Focus-Point Selection Choose a focus point for autofocus. Viewing the Focus-Point Display 1 Press MENU/OK and go to the shooting menu. 2 Select G AF/MF SETTING > FOCUS AREA to view the focus-point display. 3 Use the focus stick (focus lever) and rear command dial to choose a focus area. N The focus point can also be selected using touch controls (P 21). 5 Taking Photographs 69 Selecting a Focus Point Use the focus stick (focus lever) to choose the focus point and the rear command dial to choose the size of the focus frame. The procedure varies with the option selected for AF mode. Focus stick DISP/BACK button Rear command dial AF mode Tilt r 5 y Taking Photographs z Select focus point Press Rotate Press Choose from 6 frame sizes Restore Select Select center Choose from original size highlighted focus point 3 frame sizes focus point — N • Manual focus-point selection is not available when z WIDE/TRACKING is selected in focus mode S. • If j ALL is selected for AF mode, you can rotate the rear command dial in the focus-point selection display to cycle through AF modes in the following order: r SINGLE POINT (6 frame sizes), y ZONE (3 frame sizes), and either z WIDE (focus mode S) or z TRACKING (focus mode C). 70 Autofocus The Focus-Point Display The focus-point display varies with the option selected for AF mode. N Focus frames are shown by small squares (), focus zones by the large squares. r SINGLE POINT AF mode y ZONE z WIDE/TRACKING 71 5 Taking Photographs Number of points avail- Choose from zones with Position focus frame over able can be selected using 7 × 7, 5 × 5, or 3 × 3 focus subject you want to track G AF/MF SETTING > points. using continuous AF. NUMBER OF FOCUS POINTS. Autofocus Autofocus Although the camera boasts a high-precision autofocus system, it may be unable to focus on the subjects listed below. • Very shiny subjects such as mirrors or car bodies. • Subjects photographed through a window or other reflective object. • Dark subjects and subjects that absorb rather than reflect light, such as hair or fur. • Insubstantial subjects, such as smoke or flame. • Subjects that show little contrast with the background. • Subjects positioned in front of or behind a high-contrast object that is also in the focus frame (for example, a subject photographed against a backdrop of highly contrasting elements). 5 Checking Focus To zoom in on the current focus area for precise focus, press the center of the rear command dial. Use the focus stick (focus lever) to choose another focus area. Press the center of the rear command dial again to cancel zoom. Taking Photographs Normal display N 72 Focus zoom • In focus mode S, zoom can be adjusted by rotating the rear command dial. • The focus stick can be used to select the focus area while zoom is in effect. • In focus mode S, select SINGLE POINT for G AF/MF SETTING > AF MODE. • Focus zoom is not available in focus mode C or when G AF/MF SETTING > PRE-AF is on. • Use D BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING to change the function performed by the center of the rear command dial. You can also assign its default function to other controls (P 255). Manual Focus Adjust focus manually. 1 Rotate the focus mode selector to M. j will appear in the display. 2 Focus manually using the lens focus ring. Rotate the ring left to reduce the focus distance, right to increase. 5 3 Take pictures. N • Use D BUTTON/DIAL SETTING > FOCUS RING to reverse the direction of rotation of the focus ring. • Regardless of the option selected, manual focus will be used when the lens is in manual focus mode. 73 Taking Photographs A Quick Focus • To use autofocus to focus on the subject in the selected focus area, press the button to which focus lock or AF-ON has been assigned (the size of the focus area can be chosen with the rear command dial). • In manual focus mode, you can use this feature to quickly focus on a chosen subject using either single or continuous AF according to the option chosen for G AF/MF SETTING > xF INSTANT AF SETTING. 5 Taking Photographs 74 Manual Focus Checking Focus A variety of options are available for checking focus in manual focus mode. The Manual Focus Indicator The white line indicates the distance to the subject in the focus area (in meters or feet according to the option selected for D SCREEN SET-UP > FOCUS SCALE UNITS in the setup menu), the blue bar the depth of field, or in other words the distance in front of and behind the subject that appears to be in focus. Focus distance (white line) Depth of field 75 Taking Photographs N 5 • If both AF DISTANCE INDICATOR and MF DISTANCE INDICATOR are selected in the D SCREEN SET-UP > DISP. CUSTOM SETTING list, the manual focus indicator can also be viewed using the depthof-field indicator in the standard display. Use the DISP/BACK button to display standard indicators. • Use the G AF/MF SETTING > xF DEPTH-OF-FIELD SCALE option to choose how depth of field is displayed. Choose FILM FORMAT BASIS to help you make practical assessments of depth of field for pictures that will be viewed as prints and the like, PIXEL BASIS to help you assess depth of field for pictures that will be viewed at high resolutions on computers or other electronic displays. Manual Focus Focus Zoom If ON is selected for G AF/MF SETTING > FOCUS CHECK, the camera will automatically zoom in on the selected focus area when the focus ring is rotated (P 69). Press the center of the rear command dial to exit zoom. N • Use the focus stick (focus lever) to choose another focus area. • If STANDARD or FOCUS PEAK HIGHLIGHT is selected for G AF/MF SETTING > MF ASSIST, zoom can be adjusted by rotating the rear command dial. Zoom cannot be adjusted when DIGITAL SPLIT IMAGE or DIGITAL MICROPRISM is selected. MF Assist Use G AF/MF SETTING > MF ASSIST to choose a focus check option. N The MF ASSIST menu can be displayed by pressing and holding the center of the rear command dial. 5 Taking Photographs The following options are available: • DIGITAL SPLIT IMAGE: Displays a split image in the center of the frame. Frame the subject in the split-image area and rotate the focus ring until the four parts of the split image are correctly aligned. • DIGITAL MICROPRISM: A grid pattern that emphasizes blur is displayed when the subject is out of focus, disappearing to be replaced by a sharp image when the subject is in focus. • FOCUS PEAK HIGHLIGHT: Highlights high-contrast outlines. Rotate the focus ring until the subject is highlighted. 76 Exposure Compensation Adjust exposure. Rotate the exposure compensation dial. O • The amount of compensation available varies with the shooting mode. • Exposure compensation can be previewed in the shooting display, although the display may not accurately reflect its effects if: - the exposure compensation amount exceeds ±3 EV, - W 200% or X 400% is selected for DYNAMIC RANGE, or - STRONG or WEAK is selected for D RANGE PRIORITY. 77 5 Taking Photographs Exposure compensation can still be previewed in the viewfinder or LCD monitor by pressing the shutter button halfway. In movie mode, the display may not accurately reflect the effects of exposure compensation during F-log recording or when W 200% or X 400% is selected for DYNAMIC RANGE. An accurate preview can be obtained by selecting mode M and adjusting exposure directly. Exposure Compensation C (Custom) When the exposure compensation dial is rotated to C, exposure compensation can be adjusted by first pressing the center of the front command dial and then rotating the dial. N • The front command dial can be used to set exposure compensation to values between −5 and +5 EV. • The front command dial can be used to set aperture or exposure compensation. Press the center of the dial to toggle between the two. 5 Taking Photographs 78 Sensitivity Adjust the camera’s sensitivity to light. Set sensitivity using A SHOOTING SETTING > ISO. Option Description Sensitivity is automatically adjusted in response to shooting conAUTO1 ditions according to combination of standard and maximum senAUTO2 sitivity and minimum shutter speed chosen for A SHOOTING AUTO3 SETTING > ISO. Choose from AUTO1, AUTO2, and AUTO3 (P 80). 160–12800 Adjust sensitivity manually. Selected value is shown in display. L (80) L (100) Choose for special situations. Note that mottling may appear in L (125) pictures taken at H, while L reduces dynamic range. H (25600) H (51200) 5 • When the drive dial is rotated to F (movie), the movie menu B MOVIE SETTING > F ISO item will be displayed. • If desired, you can use D BUTTON/DIAL SETTING > COMMAND DIAL SETTING to configure the camera so that ISO sensitivity can be adjusted using the front or rear command dial. Adjusting Sensitivity High values can be used to reduce blur when lighting is poor, while lower values allow slower shutter speeds or wider apertures in bright light; note, however, that mottling may appear in pictures taken at high sensitivities. 79 Taking Photographs N • Sensitivity is not reset when the camera is turned off. Sensitivity AUTO Choose the base sensitivity, maximum sensitivity, and minimum shutter speed for AUTO1, AUTO2, and AUTO3. Item DEFAULT SENSITIVITY MAX. SENSITIVITY MIN. SHUTTER SPEED Options 160–12800 400–12800 ⁄–¼ SEC, AUTO AUTO1 800 Default AUTO2 160 3200 AUTO AUTO3 12800 The camera automatically chooses a sensitivity between the default and maximum values; sensitivity is only raised above the default value if the shutter speed required for optimal exposure would be slower than the value selected for MIN. SHUTTER SPEED. N • If the value selected for DEFAULT SENSITIVITY is higher than that selected for MAX. SENSITIVITY, DEFAULT SENSITIVITY will be set to the value selected for MAX. SENSITIVITY. • The camera may select shutter speeds slower than MIN. SHUTTER SPEED if pictures would still be underexposed at the value selected for MAX. SENSITIVITY. • If AUTO is selected for MIN. SHUTTER SPEED, the camera will automatically choose a minimum shutter speed fast enough to prevent blur caused by subject motion or camera shake (the minimum shutter speed is not affected by the option selected for image stabilization). 5 Taking Photographs 80 Metering Choose how the camera meters exposure. A SHOOTING SETTING > PHOTOMETRY offers a choice of the following metering options: O The selected option will only take effect when G AF/MF SETTING > FACE/EYE DETECTION SETTING is OFF. Mode o MULTI p CENTER WEIGHTED v w AVERAGE The camera meters the entire frame but assigns the greatest weight to the area at the center. The camera meters lighting conditions in an area equivalent to 2% of the frame. Recommended with backlit subjects and in other cases in which the background is much brighter or darker than the main subject. Exposure is set to the average for the entire frame. Provides consistent exposure across multiple shots with the same lighting, and is particularly effective for landscapes and portraits of subjects dressed in black or white. N To meter the subject in the selected focus area, choose ON for G AF/ MF SETTING > INTERLOCK SPOT AE & FOCUS AREA (P 137). 81 5 Taking Photographs SPOT Description The camera instantly determines exposure based on an analysis of composition, color, and brightness distribution. Recommended in most situations. Focus/Exposure Lock Focus and exposure lock when the shutter button is pressed halfway. 1 Position the subject in the focus frame and press the shutter button halfway to lock focus and exposure. Focus and exposure will remain locked while the shutter button is pressed halfway (AF/AE lock). 2 Press the button all the way down. N Focus and exposure lock via the shutter button is only available when ON is selected for D BUTTON/DIAL SETTING > SHUTTER AF, SHUTTER AE. 5 Taking Photographs 82 Focus/Exposure Lock Other Controls Focus and exposure can also be locked with the AF-L and AE-L buttons. At default settings, the AF-L button locks focus, the AE-L button exposure. • While the assigned control is pressed, AE-L AF-L pressing the shutter button halfway will not end the lock. • If AE&AF ON/OFF SWITCH is selected for D BUTTON/DIAL SETTING > AE/AF-LOCK MODE, the lock can only be ended by pressing the control a second time. N • The focus lever (focus stick) can be used to reposition the focus point during exposure lock. AE-L and AF-L buttons can be assigned other roles using D BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING. Exposure and focus lock can also be assigned to other buttons (P 255). • The 5 Taking Photographs 83 Bracketing Automatically vary settings over a series of pictures. 1 Rotate the drive dial to BKT1 or BKT2. 2 Navigate to DRIVE SETTING in the A SHOOTING SETTING menu and select the desired bracketing option using BKT1 SETTING/BKT2 SETTING > BKT SELECT (P 141). Bracketing type O AE BKT W ISO BKT X FILM SIMULATION BKT V WHITE BALANCE BKT Y DYNAMIC RANGE BKT Z FOCUS BKT 5 Taking Photographs 3 4 84 Adjust bracketing settings as desired. Take pictures. P 85 85 85 86 86 87 Bracketing O AE BKT Choose the number of shots in the bracketing sequence and the order in which the shots are taken. Settings can be adjusted using A SHOOTING SETTING > DRIVE SETTING > BKT1 SETTING/ BKT2 SETTING > AE BKT. Option Description Choose the number of shots in the bracketing sequence and the amount exposure is varied with each shot. FRAMES/STEP SETTING • FRAMES: Choose the number of shots in the bracketing sequence. • STEP: Choose the amount exposure is varied with each shot. • 1 FRAME: The shots in the bracketing sequence are taken one at a time. 1 FRAME/CONTINUOUS • CONTINUOUS: The shots in the bracketing sequence are taken in a single burst. SEQUENCE SETTING Choose the order in which the shots are taken. N Regardless of the bracketing amount, exposure will not exceed the W ISO BKT Each time the shutter is released, the camera will take a picture at the current sensitivity and process it to create two additional copies, one with sensitivity raised and the other with sensitivity lowered by a selected amount. The amount can be chosen using A SHOOTING SETTING > DRIVE SETTING > BKT1 SETTING/ BKT2 SETTING > ISO BKT. ±1⁄3 Options ±2⁄3 ±1 X FILM SIMULATION BKT Each time the shutter is released, the camera takes one shot and processes it to create copies with different film simulation settings (P 106). Film simulation settings can be chosen using A SHOOTING SETTING > DRIVE SETTING > BKT1 SETTING/ BKT2 SETTING > FILM SIMULATION BKT. 85 Taking Photographs limits of the exposure metering system. 5 V WHITE BALANCE BKT Each time the shutter is released, the camera will take a picture at the current white balance setting and process it to create two additional copies, one with fine-tuning increased and the other with fine-tuning decreased by a selected amount. The amount can be chosen using A SHOOTING SETTING > DRIVE SETTING > BKT1 SETTING/BKT2 SETTING > WHITE BALANCE BKT. ±1 Options ±2 ±3 Y DYNAMIC RANGE BKT Each time the shutter button is pressed, the camera takes three shots with different dynamic ranges: 100% for the first, 200% for the second, and 400% for the third. N While dynamic range bracketing is in effect, sensitivity will be restricted to a minimum of ISO 640; the sensitivity previously in effect is restored when bracketing ends. 5 Taking Photographs 86 Bracketing Z FOCUS BKT Each time the shutter button is pressed, the camera takes a series of photos, varying focus with each shot. Settings can be adjusted using A SHOOTING SETTING > DRIVE SETTING > BKT1 SETTING/BKT2 SETTING > FOCUS BKT. Options MANUAL AUTO N • Do not adjust zoom during shooting. • Use of a tripod is recommended. MANUAL In MANUAL mode, you choose the following. Option FRAMES STEP INTERVAL Description Choose the number of shots. Choose the amount focus changes with each shot. Choose the interval between shots. 5 Step Frames 1 2 3 4 5 Starting focus position • Focus proceeds from the starting position toward infinity. • Small STEP values translate to small changes in focus, larger values to larger changes. • Regardless of the option chosen for FRAMES, shooting ends when focus reaches infinity. 87 Taking Photographs Focus and FRAMES/STEP The relation between focus and the options chosen for FRAMES and STEP is shown in the illustration. Bracketing AUTO In AUTO mode, the camera calculates FRAMES and STEP automatically. 1 Select AUTO and choose an INTERVAL. The view through the lens will be displayed. 2 Focus on the nearest end of the subject and press MENU/OK. The selected focus distance appears as A on the focus distance indicator. FOCUS BKT SETTING SET POINT A CONTROL THE FOCUS RING SET POINT B SET N The same focus range can be chosen by focusing on the farthest end of the subject first. 3 5 Taking Photographs Focus on the farthest end of the subject and press DISP/BACK. The selected focus distance (B) and focus range (A to B) appear on the focus distance indicator. FOCUS BKT SETTING SET POINT B CONTROL THE FOCUS RING SET POINT A SET N Instead of pressing the DISP/BACK button, you can press MENU/OK and select A again. 4 Take photographs. The camera will calculate values for FRAMES and STEP automatically. The number of frames will appear in the display. NO N BKT1 SETTING and BKT2 SETTING use the same values for A and B. 88 Continuous Shooting (Burst Mode) Capture motion in a series of pictures. 1 Rotate the drive dial to select CH (highspeed burst) or CL (low-speed burst). 2 Navigate to DRIVE SETTING > CH HIGH SPEED BURST or CL LOW SPEED BURST in the A SHOOTING SETTING menu and choose a frame advance rate. Option * Available with electronic shutter only. Select the frame rate used when the drive dial is rotated to CL (low-speed burst). CL LOW SPEED BURST Options 5.0fps 4.0fps 3.0fps 3 The camera will take pictures continuously while the shutter-release button is pressed. Shooting ends when the shutter button is released or the memory card is full. 89 5 Taking Photographs Description Select the frame rate used when the drive dial is rotated to CH (high-speed burst). The display frame rate when the electronic shutter is used is 40 fps, or 60 fps in 1.25× crop mode. Options CH HIGH SPEED BURST 20fps(1.25X CROP) R * 30fps(1.25X CROP) R * * 10fps(1.25X CROP) R 20fps R * * 8.0fps 10fps R Continuous Shooting (Burst Mode) O • Frame advance rates of 10 fps or faster are available only when s ELECTRONIC SHUTTER is selected for A SHOOTING SETTING > SHUTTER TYPE. • If file numbering reaches 9999 before shooting is complete, the remaining pictures will be recorded to a new folder. • Shooting ends when the memory card is full; the camera will record all photos shot to that point. Burst shooting may not begin if the space available on the memory card is insufficient. • Frame rates may slow as more shots are taken. • Frame rate varies with the scene, shutter speed, sensitivity, and focus mode. • Depending on shooting conditions, frame rates may slow or the flash may not fire. • Recording times may increase during burst shooting. 5 Focus and Exposure • Select focus mode C to vary focus with shot. • To vary exposure with each shot, select OFF for D BUTTON/DIAL SETTING > SHUTTER AE. Taking Photographs N Exposure and focus tracking performance may vary with such factors as aperture, sensitivity, and exposure compensation. 90 Panoramas Follow an on-screen guide to create a panorama. Rotate the drive dial to u (Panorama). 2 To select the size of the angle through which you will pan the camera while shooting, press the focus stick (focus lever) left. Highlight a size and press MENU/OK. 3 Press the focus stick right to view a choice of pan directions. Highlight a pan direction and press MENU/OK. 4 Press the shutter button all the way down to start recording. There is no need to keep the shutter button pressed during recording. 5 Pan the camera in the direction shown by the arrow. Shooting ends automatically when the camera is panned to the end of the guides and the panorama is complete. Sweep camera along yellow line in direction of ANGLE DIRECTION 91 5 Taking Photographs 1 For Best Results • Move the camera slowly in a small circle at a steady speed • Keep the camera parallel or at right angles to the horizon and be sure to pan only in the direction shown by the guides • Try panning at a different speed if the desired results are not achieved • Prop your elbows against your sides • Use a tripod • For best results, use a lens with a focal length of 35 mm or less (50 mm or less in 35 mm format). O • If the shutter button is pressed all the way down before the panorama is complete, shooting will end and no panorama may be recorded. • The last part of the panorama may not be recorded if shooting ends before the panorama is complete. • Panoramas are created from multiple frames, and the camera may in some cases be unable to stitch the frames together perfectly. • Panoramas may be blurred if the subject is poorly lit. • Shooting may be interrupted if the camera is panned too quickly or 5 Taking Photographs too slowly. Panning the camera in a direction other than that shown cancels shooting. • The camera may in some cases record a greater or lesser angle than selected. • The desired results may not be achieved with: - Moving subjects - Subjects close to the camera - Unvarying subjects such as the sky or a field of grass - Subjects that are in constant motion, such as waves and waterfalls - Subjects that undergo marked changes in brightness • If ON is selected for D BUTTON/DIAL SETTING > SHUTTER AE, exposure for the entire panorama is determined by the first frame. 92 Panoramas Viewing Panoramas With the panorama displayed full frame, press the focus stick (focus lever) down to start panorama playback. Vertical panoramas will scroll vertically, horizontal panoramas horizontally. PLAY STOP PAUSE • In full-frame playback, you can use the rear command dial to zoom panoramas in or out. • Panorama playback is controlled using the focus stick. Full-frame playback — Start playback Left/right View other pictures Panorama Panorama playback playback paused End playback Pause playback Resume playback Choose pan Scroll panorama direction manually 93 5 Taking Photographs Focus stick (focus lever) Up Down Multiple Exposures Create a photograph that combines multiple exposures. 5 1 Rotate the drive dial to j (Multiple exposure). 2 Choose a blend mode using A SHOOTING SETTING > DRIVE SETTING > MULTIPLE EXPOSURE CTRL. Taking Photographs Option ADDITIVE AVERAGE LIGHT DARK 3 94 Description The camera adds the exposures together. You may need to lower exposure compensation depending on the number of shots. The camera automatically optimizes exposure for the final picture. The background in series shot without changing the composition will be optimally exposed. The camera compares the exposures and chooses only the brightest pixel at each location. Colors may be mixed depending on their brightness and hue. The camera compares the exposures and chooses only the darkest pixel at each location. Colors may be mixed depending on their brightness and hue. Take the first shot. Multiple Exposures 4 Press MENU/OK. The first shot will be shown superimposed on the view through the lens and you will be prompted to take the second shot. NEXT RETRY EXIT N • To return to the previous step and retake the first shot, press the focus stick (focus lever) left. • To save the first shot and exit without creating a multiple exposure, press DISP/BACK. 5 Take the second shot, using the first frame as a guide. EXIT 6 Press MENU/OK. The combined exposures will be displayed as a guide to composing the next shot. 5 EXIT the focus stick left. • To end shooting and create a multiple exposure from the shots taken to this point, press DISP/BACK. 7 Make additional exposures. Each photograph can contain up to nine exposures. 8 Press DISP/BACK to end shooting. The camera will create the combined image and multiple exposure shooting will end. 95 Taking Photographs RETRY N • To return to the previous step and retake the second shot, press Advanced Filters Take photos with filter effects. 1 Rotate the drive dial to Adv.1 or Adv.2 (Advanced filter). 2 Navigate to DRIVE SETTING > Adv. FILTER 1 SELECT or Adv. FILTER 2 SELECT in the A SHOOTING SETTING menu and choose the desired filter effect. 3 Take photographs. 5 Taking Photographs 96 Advanced Filters Advanced Filter Options Choose from the following filters: Filter G TOY CAMERA H MINIATURE I POP COLOR J HIGH-KEY Z LOW-KEY K DYNAMIC TONE X SOFT FOCUS Description Choose for a retro toy camera effect. The tops and bottoms of pictures are blurred for a diorama effect. Create high-contrast images with saturated colors. Create bright, low-contrast images. Create uniformly dark tones with few areas of emphasized highlights. Dynamic tone expression is used for a fantasy effect. Create a look that is evenly soft throughout the whole image. N Depending on the subject and camera settings, images may in some cases be grainy or vary in brightness or hue. 97 5 Taking Photographs u PARTIAL COLOR (RED) v PARTIAL COLOR (ORANGE) Areas of the image that are the selected color are w PARTIAL COLOR (YELLOW) recorded in that color. All other areas of the image x PARTIAL COLOR (GREEN) are recorded in black-and-white. y PARTIAL COLOR (BLUE) z PARTIAL COLOR (PURPLE) Flash Photography Use the built-in flash for additional lighting when shooting at night or indoors under low light. 5 Slide the N lever as shown to raise the flash. 2 Select FLASH FUNCTION SETTING in the F FLASH SETTING menu. The camera will display options for the built-in flash. Taking Photographs 1 FLASH SETTING FLASH FUNCTION SETTING RED EYE REMOVAL TTL-LOCK MODE LED LIGHT SETTING COMMANDER SETTING CH SETTING EXIT O Sync terminal options will be displayed if the built-in flash is lowered and either no flash unit, or an incompatible flash unit, is mounted on the hot shoe (P 270). Raise the flash before adjusting settings. 98 Flash Photography 3 Highlight items using the focus stick (focus lever) and rotate the rear command dial to change the highlighted setting (P 100). MODE Built-In Flash ADJUST 4 END Press DISP/BACK to put the changes into effect. O • Depending on the distance to the subject, some lenses may cast shadows in photos taken with the flash. • Be careful not to injure yourself on the edges of the raised flash. • The flash will not fire at some settings, for example in panorama mode or when the electronic shutter is used. • Choose shutter speeds slower than 180X when using the flash in exposure mode S (shutter-priority AE) or manual (M). N • In TTL mode, the flash may fire several times with each shot. Do not move the camera until shooting is complete. • The flash will not fire if OFF is selected for SOUND & FLASH in the D USER SETTING menu. 5 Taking Photographs 99 Flash Settings The following settings are available with the built-in flash. MODE Built-In Flash ADJUST Setting 5 END Taking Photographs Description Choose from the following options: • TTL: TTL mode. Adjust flash compensation (B) and choose a flash mode (C). • M: The flash fires at the selected output (B) regardless of subject brightness or camera settings. Output is expressed in fractions of full power, from ⁄ to ⁄. The desired results A Flash control mode may not be achieved at low values if they exceed the limits of the flash control system; take a test shot and check the results. • C (primary flash): Choose if the flash is being used as a primary flash controlling secondly flash units, for example as part of a studio flash system. • D (OFF): The flash does not fire. B Flash compensation/ Adjust flash level. The options available vary with the flash control mode (A). output 100 Flash Photography Setting C Flash mode (TTL) D Sync Description Choose a flash mode for TTL flash control. The options available vary with the shooting mode (P, S, A, or M) selected. • E (FLASH AUTO): The flash fires only as required; flash level is adjusted according to subject brightness. A p icon displayed when the shutter button is pressed halfway indicates that the flash will fire when the photo is taken. • F (STANDARD): The flash fires with every shot if possible; flash level is adjusted according to subject brightness. The flash will not fire if not fully charged when the shutter is released. • G (SLOW SYNC.): Combine the flash with slow shutter speeds when photographing portrait subjects against a backdrop of night scenery. The flash will not fire if not fully charged when the shutter is released. Choose whether the flash is timed to fire immediately after the shutter opens (H/1ST CURTAIN) or immediately before it closes (I/2ND CURTAIN). 1ST CURTAIN is recommended in most circumstances. Flash Sync Speed The flash will synchronize with the shutter at shutter speeds of 1⁄180 s or slower. Optional Flash Units from Fujifilm The camera can be used with optional Fujifilm shoe-mounted flash units. Third-Party Flash Units Do not use third-party flash units that apply over 300 V to the camera hot shoe. 101 Taking Photographs Red-Eye Removal Red-eye removal is available when an option other than OFF is selected for F FLASH SETTING > RED EYE REMOVAL and G AF/MF SETTING > FACE/EYE DETECTION SETTING is FACE DETECTION ON. Red-eye removal minimizes “red-eye” caused when light from the flash is reflected from the subject’s retinas. 5 MEMO 102 The Shooting Menus 103 IMAGE QUALITY SETTING (Still Photography) Adjust image quality settings for still photography. To display image quality settings, press MENU/OK in the photo shooting display and select the H (IMAGE QUALITY SETTING) tab. IMAGE QUALITY SETTING IMAGE SIZE IMAGE QUALITY RAW RECORDING FILM SIMULATION MONOCHROMATIC COLOR GRAIN EFFECT COLOR CHROME EFFECT COLOR CHROME FX BLUE EXIT N The options available vary with the shooting mode selected. IMAGE SIZE Choose the size and aspect ratio at which still pictures are recorded. 6 The Shooting Menus Option O3:2 O 16 : 9 Image size 6240 × 4160 6240 × 3512 Option O1:1 Image size 4160 × 4160 Option P3:2 P 16 : 9 Image size 4416 × 2944 4416 × 2488 Option P1:1 Image size 2944 × 2944 Option Q3:2 Q 16 : 9 Image size 3120 × 2080 3120 × 1760 Option Q1:1 Image size 2080 × 2080 The following options are available in SPORTS FINDER MODE and when 1.25X CROP is selected in CH HIGH SPEED BURST mode: Option P3:2 P 16 : 9 Image size 4992 × 3328 4992 × 2808 Option P1:1 Image size 3328 × 3328 N IMAGE SIZE is not reset when the camera is turned off or another shooting mode is selected. 104 IMAGE QUALITY SETTING (Still Photography) IMAGE QUALITY Choose a file format and compression ratio. Option FINE Description Low compression ratios are used for higher-quality images. Higher compression ratios are used to increase the number of NORMAL images that can be stored. Record both RAW and fine-quality JPEG images. FINE + RAW NORMAL + RAW Record both RAW and normal-quality JPEG images. Record RAW images only. RAW The Function Buttons To toggle RAW image quality on or off for a single shot, assign RAW to a function button (P 255). Press the button once to select the option in the right column, again to return to the original setting (left column). Option selected by pressing function button to which RAW is assigned FINE + RAW NORMAL + RAW FINE NORMAL FINE 105 6 The Shooting Menus Option currently selected for IMAGE QUALITY FINE NORMAL FINE + RAW NORMAL + RAW RAW RAW RECORDING Choose whether to compress RAW images. Option UNCOMPRESSED Description RAW images are not compressed. RAW images are compressed using a reversible algorithm that reduces file size with no loss of image data. The images can be viewed in Capture One Express Fujifilm (P 298), RAW FILE CONVERTER EX powered by LOSSLESS COMPRESSED SILKYPIX (P 298), FUJIFILM X RAW STUDIO (P 299), or other software that supports “lossless” RAW compression. Quality is the same as UNCOMPRESSED, but the resulting files are anywhere from about 30 to 90 percent of their uncompressed size. RAW images are compressed using a “lossy”, non-reversible algorithm. Quality is about the same as UNCOMPRESSED, COMPRESSED but the resulting files are anywhere from about 25 to 35 percent of their uncompressed size. 6 The Shooting Menus FILM SIMULATION Simulate the effects of different kinds of film, including blackand-white (with or without color filters). Choose a palette according to your subject and creative intent. Option a AUTO Description The camera chooses the film simulation. This option is available when the auto mode selector lever is rotated to w. c PROVIA/STANDARD Ideal for a wide range of subjects. d Velvia/VIVID Vibrant reproduction, ideal for landscape and nature. e ASTIA/SOFT Softer color and contrast for a more subdued look. i CLASSIC CHROME Soft color and enhanced shadow contrast for a calm look. 106 IMAGE QUALITY SETTING (Still Photography) Option Description Ideal for portrait with slightly enhanced contrast. h PRO Neg. Std Ideal for portrait with soft gradations and skin tones. g CLASSIC Neg. Enhanced color with hard tonality to increase image depth. Soft color and rich shadow tone suitable for film look movie. Unique color with low saturation and high contrast. Suitable for still and movie. Shoot in Black and White In rich details with sharpness. Available with yellow (Ye), red (R), and green (G) filters, which deepen shades of gray corresponding to hues complementary to the selected color. • d ACROS+Ye FILTER: Slightly enhances contrast and darkens skies. • c ACROS+R FILTER: Enhances contrast and darkens skies considerably. • b ACROS+G FILTER: Produces pleasing skin tones in portrait. Shoots in black and white. Available with yellow (Ye), red (R), and green (G) filters, which deepen shades of gray corresponding to hues complementary to the selected color. • e MONOCHROME+Ye FILTER: Slightly enhances contrast and darkens skies. • d MONOCHROME+R FILTER: Enhances contrast and darkens skies considerably. • f MONOCHROME+G FILTER: Produces pleasing skin tones in portrait. Shoots in sepia tone. X ETERNA/CINEMA N ETERNA BLEACH BYPASS a ACROS b MONOCHROME f SEPIA N • Film simulation options can be combined with tone and sharpness settings. • Film simulation settings can also be accessed via shortcuts (P 246). • For more information, visit: https://fujifilm-x.com/global/tag/the-world-of-film-simulation/?post_type=xstories 107 6 The Shooting Menus g PRO Neg. Hi MONOCHROMATIC COLOR Add a reddish or bluish tinge (warm or cool color cast) to the a ACROS and b MONOCHROME monochrome film simulations. Color can be adjusted on the WARM–COOL and G (Green)–M (Magenta) axes. MONOCHROMATIC COLOR SET GRAIN EFFECT Add a film grain effect. ROUGHNESS Option STRONG WEAK OFF Description Choose for rougher grains. Choose for smoother grains. Turn the effect off. SIZE 6 The Shooting Menus Option LARGE SMALL Description Choose for coarser grains. Choose for finer grains. COLOR CHROME EFFECT Increase the range of tones available for rendering colors that tend to be highly saturated, such as reds, yellows, and greens. Option STRONG WEAK OFF 108 Description Choose for a strong effect. Choose for a weak effect. Turn the effect off. IMAGE QUALITY SETTING (Still Photography) COLOR CHROME FX BLUE Increase the range of tones available for rendering blues. Option STRONG WEAK OFF Description Choose for a strong effect. Choose for a weak effect. Turn the effect off. WHITE BALANCE For natural colors, choose a white balance option that matches the light source. Description White balance is adjusted automatically. Choose for whiter whites in scenes lit by incandescent bulbs. White balance is adjusted automatically. White balance is adjusted automatically. Choose for warmer whites in scenes lit by incandescent bulbs. Measure a value for white balance. 6 Choose a color temperature. The Shooting Menus Option WA WHITE PRIORITY AUTO AA AMBIENCE PRIORITY k CUSTOM 1 l CUSTOM 2 m CUSTOM 3 k COLOR TEMPERATURE i DAYLIGHT j SHADE k FLUORESCENT LIGHT-1 l FLUORESCENT LIGHT-2 m FLUORESCENT LIGHT-3 n INCANDESCENT For subjects in direct sunlight. For subjects in the shade. Use under “daylight” fluorescent lights. Use under “warm white” fluorescent lights. Use under “cool white” fluorescent lights. Use under incandescent lighting. Reduces the blue cast typically associated with underwater g UNDERWATER lighting. 109 N • In conditions in which AUTO fails to produce the desired results—for example, under certain types of lighting or in close-ups of portrait subjects—use custom white balance or choose a white balance option suited to the light source. • White balance is adjusted for flash lighting only in AUTO, WA WHITE PRIORITY, AA AMBIENCE PRIORITY, and g modes. Turn the flash off using other white balance options. • White balance options can also be accessed via shortcuts (P 246). Fine-Tuning White Balance Pressing MENU/OK after selecting a white balance option displays a fine-tuning dialog; use the focus stick (focus lever) to fine-tune white balance. WB SHIFT SET N • To exit without fine-tuning white balance, press DISP/BACK after selecting a white balance option. 6 • You cannot tilt the focus stick diagonally when fine-tuning white balance. The Shooting Menus 110 IMAGE QUALITY SETTING (Still Photography) Custom White Balance Choose k, l, or m to adjust white CUSTOM 1 balance for unusual lighting conditions using a white object as a reference (colored objects can also be used to lend photos a color cast). A white balance tarSHUTTER : NEW WB SHIFT NOT CHANGE get will be displayed; position and size the target so that it is filled by the reference object and press the shutter button all the way down to measure white balance (to select the most recent custom value and exit without measuring white balance, press DISP/BACK, or press MENU/OK to select the most recent value and display the fine-tuning dialog). • If “COMPLETED !” is displayed, press MENU/OK COMPLETED ! to set white balance to the measured value. • If “UNDER” is displayed, raise exposure compensation and try again. SET CANCEL • If “OVER” is displayed, lower exposure compensation and try again. 6 The Shooting Menus 111 k: Color Temperature Adjust white balance to match the color temperature of the light source. N Color temperature can be adjusted to make pictures “warmer” or “colder” or deliberately produce colors that differ radically from those in real life. 1 Select k in the white balance menu. The option currently selected for color temperature will be displayed. WHITE BALANCE COLOR TEMPERATURE R:0 B:0 SET 2 6 Edit the color temperature using the focus stick (focus lever) and press MENU/OK. A fine-tuning dialog will be displayed. SHIFT COLOR TEMPERATURE SET SHIFT The Shooting Menus N • You can also adjust color temperature in increments of 10 K by rotating the rear command dial. • Choose from values of from 2500 to 10000 K. • To exit without fine-tuning white balance, press DISP/BACK after choosing a color temperature. 3 4 Highlight a fine-tuning amount using the focus stick. Press MENU/OK. The changes will be applied. The selected color temperature will appear in the display. 112 IMAGE QUALITY SETTING (Still Photography) Color Temperature Color temperature is an objective measure of the color of a light source, expressed in Kelvin (K). Light sources with a color temperature close to that of direct sunlight appear white; light sources with a lower color temperature have a yellow or red cast, while those with a higher color temperature are tinged with blue. DYNAMIC RANGE Adjust dynamic range. Wide dynamic ranges reduce loss of detail in highlights for more natural results with high-contrast or backlit scenes. Option Description V 100% Choose for increased contrast. AUTO W 200% Reduce loss of detail in highlights. X 400% O Mottling may appear in pictures taken at higher values. Choose a value according to the scene. N • If AUTO is selected, the camera will automatically choose either 113 6 The Shooting Menus V 100% or W 200% according to the subject and shooting conditions. Shutter speed and aperture will be displayed when the shutter button is pressed halfway. • W 200% is available at sensitivities of from ISO 320 to ISO 12800, X 400% at sensitivities of from ISO 640 to 12800. D RANGE PRIORITY Reduce loss of detail in highlights and shadows for natural-looking results when photographing high-contrast scenes. Option AUTO STRONG WEAK OFF Description Contrast is adjusted automatically in response to lighting conditions. Adjust dynamic range by a large amount for very high-contrast scenes. Adjust dynamic range by a smaller amount for moderately high-contrast scenes. Contrast reduction off. N • WEAK is available at sensitivities of from ISO 320 to ISO 12800, STRONG at sensitivities of from ISO 640 to 12800. • When an option other than OFF is selected, TONE CURVE, and DYNAMIC RANGE will be adjusted automatically. 6 The Shooting Menus TONE CURVE With reference to a tone curve, adjust the appearance of highlights or shadows, making them harsher or softer. Choose higher values to make shadows and highlights harsher, lower values to make them softer. Option HIGHLIGHTS SHADOWS 114 Description -2 to +4 -2 to +4 TONE CURVE HIGHLIGHTS SHADOWS SET CANCEL IMAGE QUALITY SETTING (Still Photography) COLOR Adjust color density. Choose higher values to increase saturation, lower values to reduce it. −4 −3 −2 −1 Options 0 +1 +2 +3 +4 SHARPNESS Sharpen or soften outlines. Choose higher values for sharper outlines, lower values for softer outlines. −4 −3 −2 −1 Options 0 +1 +2 +3 +4 HIGH ISO NR Reduce noise in pictures taken at high sensitivities. Choose higher values to reduce noise and smooth outlines, lower values to leave outlines visible. −4 −3 −2 −1 Options 0 +1 +2 +3 +4 6 The Shooting Menus 115 CLARITY Increase definition while altering tones in highlights and shadows as little as possible. Choose higher values for increased definition, lower values for a softer effect. −5 −4 −3 −2 −1 Options 0 +1 +2 +3 +4 +5 O The additional processing required at settings other than 0 increases the time need to save each shot. N Clarity is adjusted automatically when the auto mode selector lever is rotated to w. LONG EXPOSURE NR Select ON to reduce mottling in long time-exposures. Options ON 6 OFF O The additional processing required when ON is selected increases save times. The Shooting Menus LENS MODULATION OPTIMIZER Select ON to improve definition by adjusting for diffraction and the slight loss of focus at the periphery of the lens. Options ON 116 OFF IMAGE QUALITY SETTING (Still Photography) COLOR SPACE Choose the gamut of colors available for color reproduction. Option sRGB Adobe RGB Description Recommended in most situations. For commercial printing. PIXEL MAPPING Use this option if you notice bright spots in your pictures. 1 Press MENU/OK in the shooting display and select the H IMAGE QUALITY SETTING tab. 2 Highlight PIXEL MAPPING and press MENU/OK to perform pixel mapping. O • Results are not guaranteed. • Be sure the battery is fully charged before beginning pixel mapping. • Pixel mapping is not available when the camera temperature is elevated. • Processing may take a few seconds. 6 The Shooting Menus 117 SELECT CUSTOM SETTING Recall settings saved to custom settings banks 1 through 7 (CUSTOM 1 through CUSTOM 7) using EDIT/SAVE CUSTOM SETTING. Banks NOTHING SELECTED CUSTOM 4 CUSTOM 1 CUSTOM 5 CUSTOM 2 CUSTOM 6 CUSTOM 3 CUSTOM 7 N If you would prefer not to recall saved settings, select NOTHING SELECTED. EDIT/SAVE CUSTOM SETTING Adjust settings as desired and save them to a custom settings bank. Saved settings can be recalled using H IMAGE QUALITY SETTING > SELECT CUSTOM SETTING. Saving Custom Settings Create a new custom settings bank. 6 The Shooting Menus 1 Select H IMAGE QUALITY SETTING > EDIT/SAVE CUSTOM SETTING in the shooting menu and press MENU/OK. 2 Highlight a destination bank for the new settings (CREATE NEW C1 through C7) and press MENU/OK. A confirmation dialog will be displayed. 3 Highlight OK and press MENU/OK. Current camera settings will be saved to the selected bank. EDIT/SAVE CUSTOM SETTING CREATE NEW CREATE NEW CREATE NEW CREATE NEW CREATE NEW CREATE NEW CREATE NEW CREATE NEW CUSTOM 1 CREATE NEW OK? OK CANCEL 118 IMAGE QUALITY SETTING (Still Photography) Editing Custom Settings Edit existing custom settings banks. 1 Select H IMAGE QUALITY SETTING > EDIT/SAVE CUSTOM SETTING in the shooting menu and press MENU/OK. 2 Highlight the desired custom settings bank and press MENU/OK. 3 Highlight EDIT/CHECK and press MENU/OK. 4 The camera will display a list of shooting menu items; highlight an item you wish to edit and press MENU/OK. Adjust the selected item as desired. EDIT/SAVE CUSTOM SETTING CUSTOM 1 CUSTOM 2 CUSTOM 3 CUSTOM 4 CREATE NEW CREATE NEW CREATE NEW CUSTOM 1 EDIT/CHECK SAVE THE CHANGES RESET THE CHANGES COPY ERASE EDIT CUSTOM NAME CUSTOM 1 EDIT/CHECK IMAGE SIZE IMAGE QUALITY RAW RECORDING FILM SIMULATION MONOCHROMATIC COLOR GRAIN EFFECT COLOR CHROME EFFECT COLOR CHROME FX BLUE 5 EXIT Press MENU/OK to save the changes and return to the shooting menu list. Adjust additional items as desired. N If DISABLE is selected for H IMAGE QUALITY SETTING > AUTO UPDATE CUSTOM SETTING, red dots will appear next to the edited items but the changes will not be saved automatically. • To save the changes for selected items, highlight the items in the list and press Q. • To save changes for all items, return to Step 3 and select SAVE THE CHANGES. To cancel all changes and restore the previous settings, select RESET THE CHANGES. • If you copy an item marked by a red dot, the item will be copied with the changes intact. 119 The Shooting Menus SAVE 6 Copying Custom Settings Copy custom settings from one bank to another, overwriting the settings in the destination bank. If the source bank has been renamed, the name will also be copied to the destination bank. 6 The Shooting Menus 1 Select H IMAGE QUALITY SETTING > EDIT/SAVE CUSTOM SETTING in the shooting menu and press MENU/OK. 2 Highlight the source bank and press MENU/OK. 3 Highlight COPY and press MENU/OK. 4 Highlight the destination bank (C1 through C7) and press MENU/OK. A confirmation dialog will be displayed. EDIT/SAVE CUSTOM SETTING CUSTOM 1 CUSTOM 2 CUSTOM 3 CUSTOM 4 CREATE NEW CREATE NEW CREATE NEW CUSTOM 1 EDIT/CHECK SAVE THE CHANGES RESET THE CHANGES COPY ERASE EDIT CUSTOM NAME COPY TO CUSTOM 1 CUSTOM 2 CUSTOM 3 CUSTOM 4 CREATE NEW CREATE NEW CREATE NEW N Any changes to custom settings in the destination bank will be overwritten. 5 Highlight OK and press MENU/OK. The selected settings will be copied to the destination bank, overwriting any existing settings. 120 COPY CUSTOM 1 CUSTOM 2 COPY OK? OK CANCEL IMAGE QUALITY SETTING (Still Photography) Deleting Custom Settings Delete settings from selected custom settings banks. 1 Select H IMAGE QUALITY SETTING > EDIT/SAVE CUSTOM SETTING in the shooting menu and press MENU/OK. 2 Highlight the desired custom settings bank and press MENU/OK. 3 Highlight ERASE and press MENU/OK. A confirmation dialog will be displayed. 4 Highlight OK and press MENU/OK. Any custom settings saved to the selected bank will be deleted. EDIT/SAVE CUSTOM SETTING CUSTOM 1 CUSTOM 2 CUSTOM 3 CUSTOM 4 CREATE NEW CREATE NEW CREATE NEW CUSTOM 1 EDIT/CHECK SAVE THE CHANGES RESET THE CHANGES COPY ERASE EDIT CUSTOM NAME ERASE CUSTOM 1 ERASE OK? 6 The Shooting Menus OK CANCEL 121 Renaming Custom Settings Banks Rename selected custom settings banks. 6 1 Select H IMAGE QUALITY SETTING > EDIT/SAVE CUSTOM SETTING in the shooting menu and press MENU/OK. 2 Highlight the desired custom settings bank and press MENU/OK. 3 Highlight EDIT CUSTOM NAME and press MENU/OK. 4 Enter a new name for the custom settings bank and select SET. The selected bank will be renamed. EDIT/SAVE CUSTOM SETTING CUSTOM 1 CUSTOM 2 CUSTOM 3 CUSTOM 4 CREATE NEW CREATE NEW CREATE NEW CUSTOM 1 EDIT/CHECK SAVE THE CHANGES RESET THE CHANGES COPY ERASE EDIT CUSTOM NAME The Shooting Menus AUTO UPDATE CUSTOM SETTING Choose whether changes to saved custom settings apply automatically. Option ENABLE DISABLE 122 Description Changes to custom settings banks CUSTOM 1 through CUSTOM 7 apply automatically. Changes do not apply automatically. Any changes to custom settings must be applied manually (P 119). IMAGE QUALITY SETTING (Still Photography) xF MOUNT ADAPTOR SETTING Adjust settings for lenses attached via a mount adapter. The camera can store settings for multiple lenses (LENS 1 through LENS 6). N Any changes made using this item also apply in movie mode (P 170). Choosing a Focal Length Enter the lens’s true focal length. LENS 5 INPUT FOCAL LENGTH SET Distortion Correction Choose from STRONG, MEDIUM, or WEAK options to correct BARREL or PINCUSHION distortion. CANCEL LENS5 DISTORTION CORRECTION BARREL STRONG BARREL MEDIUM BARREL WEAK OFF PINCUSHION WEAK PINCUSHION MEDIUM PINCUSHION STRONG 6 The Shooting Menus 123 Color Shading Correction Color (shading) variations between the center and edges of the frame can be adjusted separately for each corner. To use color shading correction, follow the steps below. 6 NEXT SET 1 Rotate the rear command dial to choose a corner. The selected corner is indicated by a triangle. 2 Use the focus stick (focus lever) to adjust shading until there is no visible difference in color between the selected corner and the center of the image. • Press the focus stick left or right to adjust colors on the cyan–red axis. • Press the focus stick up or down to adjust colors on the blue–yellow axis. N To determine the amount required, adjust color shading correction while taking photos of blue sky or a sheet of gray paper. The Shooting Menus 124 IMAGE QUALITY SETTING (Still Photography) Peripheral Illumination Correction Choose from values between –5 and +5. Choosing positive values increases peripheral illumination, while choosing negative values reduces peripheral illumination. Positive values are recomSET CANCEL mended for vintage lenses, negative values to create the effect of images taken with an antique lens or a pinhole camera. N To determine the amount required, adjust peripheral illumination correction while taking photos of blue sky or a sheet of gray paper. EDIT LENS NAME Change the lens name. 6 The Shooting Menus 125 AF/MF SETTING (Still Photography) Adjust focus settings for still photography. To display AF/MF settings, press MENU/OK in the photo shooting display and select the G (AF/MF SETTING) tab. AF/MF SETTING FOCUS AREA AF MODE AF-C CUSTOM SETTINGS STORE AF MODE BY ORIENTATION AF POINT DISPLAY NUMBER OF FOCUS POINTS PRE-AF xFAF ILLUMINATOR EXIT N The options available vary with the shooting mode selected. FOCUS AREA Choose the focus area for autofocus, manual focus, and focus zoom (P 69). AF MODE Choose the AF mode for focus modes S and C (P 67). 6 The Shooting Menus 126 AF/MF SETTING (Still Photography) AF-C CUSTOM SETTINGS Select focus-tracking options for focus mode C. Choose from Sets 1 (SET 1) through 5 (SET 5) according to your subject or select SET 6 CUSTOM for custom focus-tracking options. AF-C CUSTOM SETTINGS SET 1 MULTI PURPOSE TRACKING SENSITIVITY SPEED TRACKING SENSITIVITY ZONE AREA SWITCHING AUTO OK Option 127 6 The Shooting Menus Description A standard tracking option that works well with SET 1 MULTI PURPOSE the typical range of moving subjects. The focus system attempts to track the chosen SET 2 IGNORE OBSTACLES & subject. Choose with subjects that are hard to CONTINUE TO TRACK SUBJECT keep in the focus area or if other objects are likely to enter the focus area with the subject. The focus system attempts to compensate for SET 3 FOR ACCELERATING/ subject acceleration or deceleration. Choose for DECELERATING SUBJECT subjects prone to rapid changes in velocity. The focus system attempts to focus quickly on SET 4 FOR SUDDENLY APPEARING subjects entering the focus area. Choose for SUBJECT subjects that appear abruptly or when rapidly switching subjects. Choose for hard-to-track subjects prone not only SET 5 FOR ERRATICALLY MOVING to sudden changes in velocity but also to large & ACCEL./DECEL. SUBJECT movements front to back and left to right. Adjust TRACKING SENSITIVITY, SPEED TRACKING SENSITIVITY, and ZONE AREA SET 6 CUSTOM SWITCHING to suit your preferences based on the values for Sets 1–5 (P 128, 130). Focus Tracking Options The individual parameters that are part of a focus tracking set are described below. TRACKING SENSITIVITY This parameter determines how long the camera waits to switch focus when an object enters the focus area behind or in front of the current subject. The higher the value, the longer the camera will wait. TRACKING SENSITIVITY QUICK LOCKED ON SETS THE TRACKING SENSITIVITY ON THE SUBJECT ADJUST 0 1 Options 2 3 SWITCH 4 O • The higher the value, the longer it takes the camera to refocus when you attempt to switch subjects. • The lower the value, the more likely the camera is to switch focus from your subject to other objects in the focus area. 6 The Shooting Menus SPEED TRACKING SENSITIVITY This parameter determines how sensitive the tracking system is to changes in subject velocity. The higher the value, the greater the precision with which the system attempts to respond to sudden movement. 0 Options 1 SPEED TRACKING SENSITIVITY STEADY ACCEL./DECEL. SETS THE SPEED TRACKING SENSITIVITY FOR MOVING SUBJECT ADJUST SWITCH 2 O The higher the value, the more difficulty the camera will have focusing in situations in which autofocus does not perform well, such as when the subject is highly reflective or low in contrast. 128 AF/MF SETTING (Still Photography) ZONE AREA SWITCHING This parameter determines the focus area given priority in zone AF. ZONE AREA SWITCHING CENTER AUTO FRONT SETS THE SWITCHING SENSITIVITY OF FOCUS FRAME IN ZONE AREA ADJUST Option FRONT AUTO CENTER SWITCH Description Zone AF assigns priority to the subjects closest to the camera. The camera locks focus on the subject at the center of the zone and then switches focus areas as necessary to track it. Zone AF assigns priority to subjects in the center of the zone. O This option takes effect only when y ZONE is selected for AF mode. ZONE AREA SWITCHING AUTO CENTER AUTO FRONT AUTO 129 6 The Shooting Menus Set Values Parameter values for the different sets are listed below. TRACKING SPEED TRACKING SENSITIVITY SENSITIVITY SET 1 2 0 SET 2 3 0 SET 3 2 2 SET 4 0 1 SET 5 3 2 Custom Focus Tracking Options Follow the steps below to adjust settings for Set 6. 1 Select AF-C CUSTOM SETTINGS > SET 6 CUSTOM. AF-C CUSTOM SETTINGS SET 6 CUSTOM TRACKING SENSITIVITY SPEED TRACKING SENSITIVITY ZONE AREA SWITCHING ADJUST AUTO SET DETAIL RESET 2 Highlight items using the focus stick (focus lever) and rotate the front command dial to change. To reset settings to their original values, press b. 3 Press DISP/BACK when settings are complete. 6 The Shooting Menus 130 AF/MF SETTING (Still Photography) STORE AF MODE BY ORIENTATION Choose whether the AF mode used when the camera is in portrait orientation is stored separately from that used when the camera is in landscape orientation. Option OFF FOCUS AREA ONLY ON Description The same settings are used in both orientations. The focus area for each orientation can be selected separately. The focus mode and focus area can be selected separately. AF POINT DISPLAY yz Choose whether individual focus frames are displayed when ZONE or WIDE/TRACKING is selected for G AF/MF SETTING > AF MODE. Options ON OFF Option Description Choose from 117 focus points arranged in a 9- by 13-point 117 POINTS (9 × 13) grid. Choose from 425 focus points arranged in a 17- by 25-point 425 POINTS (17 × 25) grid. 131 6 The Shooting Menus NUMBER OF FOCUS POINTS Choose the number of focus points available for focus-point selection in manual focus mode or when SINGLE POINT is selected for AF MODE. PRE-AF If ON is selected, the camera will continue to adjust focus even when the shutter button is not pressed halfway. The camera adjusts focus continuously, allowing it to focus faster when the shutter button is pressed halfway. Choosing this option helps prevent missed shots. Options ON OFF O Choosing ON increases the drain on the battery. xF AF ILLUMINATOR If ON is selected, the AF-assist illuminator will light to assist autofocus. Options ON 6 OFF O • The camera may be unable to focus using the AF-assist illuminator in some cases. The Shooting Menus • If the camera is unable to focus, try increasing the distance to the subject. • Avoid shining the AF-assist illuminator directly into your subject’s eyes. N Any changes made using this item also apply in movie mode (P 172). 132 AF/MF SETTING (Still Photography) FACE/EYE DETECTION SETTING If the camera detects human faces, it will assign them priority over the background and adjust settings appropriately for portraits when setting focus and exposure. You can also choose whether the camera focuses on the left or right eye when face detection is on. Option Description Adjust settings for Intelligent Face Detection. You can also adjust eye detection settings. • g EYE OFF: Intelligent Face Detection only. u EYE AUTO: The camera automatically chooses which eye FACE DETECTION • to focus on when a face is detected. ON • w RIGHT EYE PRIORITY: The camera focuses on the right eye of subjects detected using Intelligent Face Detection. • v LEFT EYE PRIORITY: The camera focuses on the left eye of subjects detected using Intelligent Face Detection. OFF Intelligent Face Detection and eye priority off. not be in the area indicated by the green border when the picture is taken. • In some modes, the camera may set exposure for the frame as a whole rather than the portrait subject. • FACE DETECTION ON is selected automatically if the AUTO scene is chosen when the auto mode selector lever is rotated to w. 133 The Shooting Menus O • If the subject moves as the shutter button is pressed, the face may 6 N • The face selected by the camera is indicated by a green border. Any 6 The Shooting Menus other faces detected by the camera are indicated by gray borders. To have the camera focus on a different subject, tap inside the gray border. The g icon will change from white to green. • When DIRECT AF POINT SELECTION/FACE SELECT is chosen for D BUTTON/DIAL SETTING > FOCUS LEVER SETTING > TILT o, you can also switch subjects using the focus stick (focus lever) or (during viewfinder photography) touch controls (P 21). • To switch from face detection to manual focus-area selection, press the center of the focus stick (focus lever). Press again to re-enable face detection. • If the selected subject leaves the frame, the camera will wait a set time for its return and consequently the green frame may sometimes appear in locations where no face is seen. • You cannot switch subjects during burst photography. • Depending on shooting conditions, face selection may be suspended at the close of burst shooting. • Faces can be detected with the camera in vertical or horizontal orientation. • If the camera is unable to detect the subject’s eyes because they are hidden by hair, glasses, or other objects, the camera will instead focus on faces. • Face/eye detection options can also be accessed via shortcuts (P 246). 134 AF/MF SETTING (Still Photography) AF+MF If ON is selected in focus mode S and focus has been locked (whether by pressing the shutter button halfway or by other means), focus lock can be ended and focus adjusted manually by rotating the focus ring. Options ON OFF O • Lenses with a focus distance indicator must be set to manual focus mode (MF) before this option can be used. Selecting MF disables the focus distance indicator. • If the lens is equipped with a focus distance indicator, set the focus ring to the center, as the camera may fail to focus if the ring is set to infinity or the minimum focus distance. N STANDARD and FOCUS PEAK HIGHLIGHT MF assist options can be selected using MF ASSIST. 135 6 The Shooting Menus AF + MF Focus Zoom When ON is selected for G AF/MF SETTING > FOCUS CHECK and SINGLE POINT selected for AF MODE, focus zoom can be used to zoom in on the selected focus area. The zoom ratio can be selected using the rear command dial. MF ASSIST Choose how focus is displayed in manual focus mode. Option Description Focus is displayed normally (focus peaking, digital split image, and STANDARD digital microprism are not available). Displays a black-and-white (MONOCHROME) or color (COLOR) DIGITAL SPLIT split image in the center of the frame. Frame the subject in the IMAGE split-image area and rotate the focus ring until the four parts of the split image are correctly aligned. A grid pattern that emphasizes blur is displayed when the subject DIGITAL is out of focus, disappearing to be replaced by a sharp image when MICROPRISM the subject is in focus. FOCUS PEAK The camera heightens high-contrast outlines. Choose a color and HIGHLIGHT peaking level. N You can also choose MF assist options by holding the center of the rear command dial. 6 The Shooting Menus FOCUS CHECK If ON is selected, the display will automatically zoom in on the selected focus area when the focus ring is rotated in manual focus mode. Options ON OFF N • Pressing the center of the rear command dial cancels focus zoom. • The zoom position is centered on the current focus area and changes when the focus area is changed. 136 AF/MF SETTING (Still Photography) INTERLOCK SPOT AE & FOCUS AREA Choose ON to meter the current focus frame when SPOT or MULTI metering is selected. Options ON OFF xF INSTANT AF SETTING Choose whether the camera focuses using single AF (AF-S) or continuous AF (AF-C) when a button to which focus lock or AF-ON is assigned is pressed in manual focus mode. Options AF-S AF-C N Any changes made using this item also apply in movie mode (P 174). Options PIXEL BASIS FILM FORMAT BASIS N Any changes made using this item also apply in movie mode (P 174). 137 6 The Shooting Menus xF DEPTH-OF-FIELD SCALE Choose FILM FORMAT BASIS to help you make practical assessments of depth of field for pictures that will be viewed as prints and the like, PIXEL BASIS to help you assess depth of field for pictures that will be viewed at high resolutions on computers or other electronic displays. RELEASE/FOCUS PRIORITY Choose how the camera focuses in focus mode AF-S or AF-C. Option RELEASE FOCUS Description Shutter response is prioritized over focus. Pictures can be taken when the camera is not in focus. Focus is prioritized over shutter response. Pictures can be only taken when the camera is in focus. O Regardless of the option selected, pictures can still be taken when the camera is not in focus if ON is selected for AF+MF. xF AF RANGE LIMITER Limit the range of available focus distances for increased focus speed. Option OFF 6 CUSTOM The Shooting Menus PRESET1 PRESET2 Description Focus limiter disabled. Limit focus to a range of distances defined by a minimum and maximum. • OK: Limit focus to the selected range. • SET: Choose two objects and limit focus to the distance between them. Limit focus to a preset range. O • Choosing a focus range that includes distances shorter than the minimum focus distance of the lens disables the focus limiter. • The values listed and displayed for the focus limiter may differ from the actual focus distance. N • The following additional operations can be performed when CUSTOM is selected: - You can tap objects in the touch screen display to choose the focus range. - Instead of tapping an object in the display, you set the maximum focus distance to infinity by rotating the focus ring. • Any changes made using this item also apply in movie mode (P 174). 138 AF/MF SETTING (Still Photography) xF TOUCH SCREEN MODE Choose the shooting operations performed using touch controls. Mode Description Tap your subject in the display to focus and release the shutter. TOUCH In burst mode, pictures will be taken while you keep your finger SHOOTING on the display. • In focus mode S (AF-S), the camera focuses when you tap your AF AF OFF subject in the display. Focus locks at the current distance until you tap the AF OFF icon. • In focus mode C (AF-C), the camera initiates focus when you tap your subject display. The camera will continue to adjust focus for changes in the distance to the subject until you tap the AF OFF icon. • In manual focus mode (MF), you can tap the display to focus on the selected subject using autofocus. AREA Tap to select a point for focus or zoom. The focus frame will move to the selected point. OFF Touch controls disabled. 6 tor, select OFF for D BUTTON/DIAL SETTING > TOUCH SCREEN SETTING > x TOUCH SCREEN SETTING. • Any changes made using this item also apply in movie mode (P 175). 139 The Shooting Menus N • To disable touch controls and hide the touch screen mode indica- AF/MF SETTING (Still Photography) Touch Controls for Focus Zoom Different touch controls are used during focus zoom (focus check enabled). Central Area Tapping the center of the display performs the operations below. Mode TOUCH SHOOTING AF AREA OFF 6 Operation performed AF-S/MF: Take a picture AF-S: AF MF: Instant AF AF-S: AF MF: Instant AF AF-S/MF: OFF The Shooting Menus Other Areas Tapping other areas simply scrolls the display, whether during still photography or movie recording and regardless of the option selected for touch screen mode. 140 SHOOTING SETTING (Still Photography) Adjust shooting options for still photography. To display shooting settings, press MENU/OK in the photo shooting display and select the A (SHOOTING SETTING) tab. SHOOTING SETTING SCENE POSITION DRIVE SETTING HDR SPORTS FINDER MODE PRE-SHOT SELF-TIMER SAVE SELF-TIMER SETTING SELF-TIMER LAMP EXIT SCENE POSITION Choose a scene for use when the auto mode selector lever is rotated to w (P 62). DRIVE SETTING Adjust settings for the various drive modes. Option BKT1 SETTING BKT2 SETTING CH HIGH SPEED BURST MULTIPLE EXPOSURE CTRL Adv. FILTER 1 SELECT Adv. FILTER 2 SELECT 141 6 The Shooting Menus CL LOW SPEED BURST Description Choose the settings used when the drive dial is rotated to BKT1 or BKT2 (P 84). Select the frame rate used when the drive dial is rotated to CH (high-speed burst) (P 89). Select the frame rate used when the drive dial is rotated to CL (low-speed burst) (P 89). Adjust multiple exposure options for use when the drive dial is rotated to j (multiple exposure) (P 94). Choose the filter used when the drive dial is rotated to Adv.1 or Adv.2 (P 96). HDR Each time the shutter button is pressed, the camera takes three shots, varying exposure each time, and combines them into a single picture. The resulting photograph preserves details in highlights and shadows. Follow the steps below to take HDR photos. 6 The Shooting Menus 1 Rotate the auto mode selector lever to v. 2 Rotate the drive dial to S (Single frame). 3 Select A SHOOTING SETTING > HDR in the shooting menu and press MENU/OK. 4 Choose the amount the brightnesses of the exposures vary. Option OFF AUTO 200% 400% 800% 800% + 5 Description HDR disabled. Dynamic range is automatically set to a value of from 200% to 800%. Dynamic range is set to 200%. Dynamic range is set to 400%. Dynamic range is set to 800%. Camera settings are adjusted for maximum variation in dynamic range. Take photographs. The camera will create a combined image. 142 SHOOTING SETTING (Still Photography) O • Keep the camera steady. • The desired results may not be achieved in the subject moves or the composition or lighting changes during shooting. • The picture will be cropped a very small amount and the resolution will drop slightly. • Mottling may appear in pictures taken at higher values. Choose a value according to the scene. • “Extended” sensitivity values are not supported. • Depending on the options selected for HDR and sensitivity, pictures may not be taken at the selected shutter speed. • The flash does not fire. N HDR images are indicated by a t icon during playback. 6 The Shooting Menus 143 SPORTS FINDER MODE Take pictures using the crop in the center of the display. Choose this option for pictures of athletes, birds, and other moving subjects. Option ON OFF Description Pictures are taken using a 1.25× crop, reducing the picture angle by an amount equivalent to increasing lens focal length by 1.25×; the crop is shown by a frame in the display. The 1.25× crop is disabled. N • The H IMAGE QUALITY SETTING > IMAGE SIZE item in the shooting menu is fixed at P. • The sports finder is not available in modes that offer an electronic shutter. 6 The Shooting Menus PRE-SHOT sJ To reduce the lag between your pressing the shutter button all the way down and the resulting picture being recorded to the memory card, the camera starts shooting with the electronic shutter when the shutter button is pressed halfway and saves a series shots starting just before the shutter button is pressed the rest of the way down. Options ON OFF N Pre-shot photography is available only when s ELECTRONIC SHUTTER is selected in CH (high speed burst) drive mode (P 148). 144 SHOOTING SETTING (Still Photography) SELF-TIMER Choose a shutter release delay. Option Description The shutter is released two seconds after the shutter button is pressed. Use to reduce blur caused by the camera moving when the shutter R 2 SEC button is pressed. The self-timer lamp blinks as the timer counts down. The shutter is released ten seconds after the shutter button is pressed. S 10 SEC Use for photographs in which you wish to appear yourself. The self-timer lamp blinks immediately before the picture is taken. OFF Self-timer off. If an option other than OFF is selected, the timer will start when the shutter button is pressed all the way down. The display shows the number of seconds remaining until the shutter is released. To stop the timer before the picture is taken, press DISP/BACK. 9 6 front of the lens can interfere with focus and exposure. • The self-timer turns off automatically when the camera is turned off. SAVE SELF-TIMER SETTING If ON is selected, the chosen self-timer setting will remain in effect after a picture is taken or the camera is turned off. Options ON OFF 145 The Shooting Menus O • Stand behind the camera when using the shutter button. Standing in SELF-TIMER LAMP If ON is selected, the self-timer lamp will light during self-timer photography. Select OFF when shooting night scenes or in other situations in which you would prefer that the lamp remain unlit. Options ON OFF INTERVAL TIMER SHOOTING Configure the camera to take photos automatically at a preset interval. 1 Select A SHOOTING SETTING in the shooting menu, highlight INTERVAL TIMER SHOOTING, and press MENU/OK. 2 Use the focus stick (focus lever) to choose the interval and number of shots. Press MENU/OK to proceed. INTERVAL/NUMBER OF TIMES INTERVAL NUMBER OF TIMES END 6 LATER The Shooting Menus ESTIMATED START TIME START 3 Use the focus stick to choose the starting time and then press MENU/OK. Shooting will start automatically. CANCEL 146 CANCEL START WAITING TIME PM CANCEL SHOOTING SETTING (Still Photography) O Interval timer photography cannot be used at a shutter speed of B (bulb) or with multiple exposure photography. In burst mode, only one picture will be taken each time the shutter is released. N • Use of a tripod is recommended. • Check the battery level before starting. We recommend using USB power source (P 243). • The display turns off between shots and lights a few seconds before the next shot is taken. • The display can be activated at any time by pressing the shutter button. • To continue shooting until the number of shots taken equals the number of exposures remaining at the time interval-timer photography started, set the number of shots to ∞. INTERVAL TIMER SHOOTING EXPOSURE SMOOTHING Select ON to automatically adjust exposure during interval-timer photography to prevent it changing dramatically between shots. Options ON OFF N • Large changes in subject brightness may make exposure appear er- PHOTOMETRY Choose how the camera meters exposure (P 81). 147 6 The Shooting Menus ratic. We recommend that you choose shorter values for INTERVAL TIMER SHOOTING > INTERVAL with subjects that brighten or dim dramatically during shooting. • In manual mode (mode M), exposure smoothing is only available if an AUTO option is selected for sensitivity. SHUTTER TYPE Choose the shutter type. Choose the electronic shutter to mute the shutter sound. Option t MECHANICAL SHUTTER s ELECTRONIC SHUTTER Description Take pictures with the mechanical shutter. Take pictures with the electronic shutter. The camera chooses the mechanical or electronic u MECHANICAL + ELECTRONIC shutter according to shooting conditions. If s ELECTRONIC SHUTTER or u MECHANICAL + ELECTRONIC is selected, shutter speeds faster than ¼000 s can be chosen by rotating the shutter speed dial to 4000 and then rotating the rear command dial. O When using the electronic shutter, note the following: • Distortion may be visible in shots of moving subjects. • Distortion may also be visible in hand-held shots taken at high shutter speeds; use of a tripod is recommended. 6 • Banding and fog may occur in shots taken under fluorescent lights or other flickering or erratic illumination. The Shooting Menus • When taking pictures with the shutter muted (P 216), respect your subjects’ image rights and right to privacy. N The following restrictions apply when the electronic shutter is used: • “Extended” sensitivity values are not supported • Long exposure noise reduction has no effect • The flash cannot be used 148 SHOOTING SETTING (Still Photography) FLICKER REDUCTION Reduce flicker in pictures and the display when shooting under fluorescent lighting and other similar light sources. Option ALL FRAMES FIRST FRAME OFF Description Flicker reduction is performed for all frames. Compared to when flicker reduction is performed only on the first frame, the frame advance rate for burst photography will drop. Flicker reduction is performed for the first frame only; in burst photography, the value measured for the first frame in each burst will be used for all subsequent shots. Flicker may be visible during burst photography. Flicker reduction disabled. O • Flicker reduction increases the time needed to record pictures. • OFF is selected for FLICKER REDUCTION when the electronic shutter is used. • Flicker reduction is not available during movie recording. 6 The Shooting Menus 149 IS MODE Reduce blur caused by camera shake or subject motion. Option Description L CONTINUOUS Image stabilization on. If + MOTION is selected, the camera + MOTION will adjust shutter speed to reduce motion blur when movl CONTINUOUS ing objects are detected. M SHOOTING As above, except that image stabilization is performed only when the shutter button is pressed halfway (focus mode C + MOTION only) or the shutter is released. If + MOTION is selected, m SHOOTING ONLY the camera will adjust shutter speed to reduce motion blur when moving objects are detected. Image stabilization off. Choose this option when using a OFF tripod. N • + MOTION has no effect when sensitivity is set to a fixed value, and 6 The Shooting Menus may also be unavailable at some other combinations of settings. The effect may vary with lighting conditions and the speed at which the object is moving. • This option is available only with lenses that support image stabilization. • The setting selected with the lens image stabilization switch, if any, takes priority over the setting chosen with the IS mode. • Note that vibration or camera sounds may be noticeable as image stabilization takes effect. ISO Adjust the camera’s sensitivity to light (P 79). 150 SHOOTING SETTING (Still Photography) xF WIRELESS COMMUNICATION Connect to smartphones running the latest version of the FUJIFILM Camera Remote app. The smartphone can then be used to: • Control the camera and take pictures remotely • Receive pictures uploaded from the camera • Browse the pictures on the camera and download selected pictures • Upload location data to the camera N For downloads and other information, visit: http://app.fujifilm-dsc.com/en/camera_remote/ 6 The Shooting Menus 151 FLASH SETTING (Still Photography) Adjust flash-related settings for still photography. To display flash settings, press MENU/OK in the photo shooting display and select the F (FLASH SETTING) tab. FLASH SETTING FLASH FUNCTION SETTING RED EYE REMOVAL TTL-LOCK MODE LED LIGHT SETTING COMMANDER SETTING CH SETTING EXIT FLASH FUNCTION SETTING Choose a flash control mode, flash mode, or sync mode or adjust the flash level. The options available vary with the flash. N For more information on flash settings, see “External Flash Units” (P 268) in “Peripherals and Optional Accessories”. 6 MODE Built-In Flash ADJUST END RED EYE REMOVAL Remove red-eye effects caused by the flash. The Shooting Menus Option Description A red-eye reduction pre-flash is combined with digital red-eye FLASH+REMOVAL removal. FLASH Flash red-eye reduction only. REMOVAL Digital red-eye removal only. OFF Flash red-eye reduction and digital red-eye removal off. N • Flash red-eye reduction can be used in TTL flash control mode. • Digital red-eye removal is performed only when a face is detected. • Digital red-eye removal is not available with RAW images. 152 FLASH SETTING (Still Photography) TTL-LOCK MODE Instead of adjusting flash level with each shot, TTL flash control can be locked for consistent results across a series of photographs. Option Description Flash output is locked at the value metered for the most LOCK WITH LAST FLASH recent photo. LOCK WITH METERING The camera emits a series of pre-flashes and locks flash FLASH output at the metered value. N • To use TTL lock, assign TTL-LOCK to a camera control and then use the control to enable or disable TTL lock (P 255). • Flash compensation can be adjusted while TTL lock is in effect. • Selecting LOCK WITH LAST FLASH displays an error message if no previously metered value exists. LED LIGHT SETTING Choose whether to use the flash unit’s LED video light (if available) as a catchlight or AF-assist illuminator when taking photos. Role of LED video light in still photography Catchlight AF-assist illuminator AF-assist illuminator and catchlight None N In some cases, this option can also be accessed via the FLASH FUNCTION SETTING menu. 153 6 The Shooting Menus Option CATCHLIGHT AF ASSIST AF ASSIST+CATCHLIGHT OFF FLASH SETTING (Still Photography) COMMANDER SETTING Choose groups when using the camera flash unit as a commander for Fujifilm optical wireless remote flash control. This option is available when the camera is used with clip-on flash units that support Fujifilm optical wireless flash control. Options Gr A Gr B Gr C OFF N In some cases, this option can also be accessed via the FLASH FUNCTION SETTING menu. CH SETTING Choose the channel used for communication between the commander and remote flash units. Separate channels can be used for different flash systems or to prevent interference when multiple systems are operating in close proximity. Options CH1 6 The Shooting Menus 154 CH2 CH3 CH4 MOVIE SETTING (Still Photography) Adjust options for movies shot during still photography using function buttons that have been assigned MOVIE RECORDING RELEASE. To display movie settings, press MENU/OK in the photo shooting display and select the B (MOVIE SETTING) tab. N The options available vary with the shooting mode selected. MOVIE SETTING MOVIE MODE FILE FORMAT FULL HD HIGH SPEED REC F IS MODE AUDIO SETTING MIC/REMOTE RELEASE EXIT MOVIE MODE This item is also found in the movie menus (P 158). Changes here also apply to the item in the movie menus. FILE FORMAT This item is also found in the movie menus (P 159). Changes here also apply to the item in the movie menus. 6 F IS MODE This item is also found in the movie menus (P 164). Changes here also apply to the item in the movie menus. 155 The Shooting Menus FULL HD HIGH SPEED REC This item is also found in the movie menus (P 160). Changes here also apply to the item in the movie menus. AUDIO SETTING Adjust audio-related settings for movie recording. INTERNAL MIC LEVEL ADJUSTMENT Adjust the recording level for the built-in microphone. Option AUTO MANUAL OFF Description The camera adjusts the recording level automatically. Adjust the recording level manually. Press the focus stick (focus lever) right to choose from 25 recording levels. Turn the built-in microphone off. EXTERNAL MIC LEVEL ADJUSTMENT Adjust the recording level for external microphones. Option AUTO MANUAL OFF Description The camera adjusts the recording level automatically. Adjust the recording level manually. Press the focus stick (focus lever) right to choose from 25 recording levels. Disable recording using external microphones. 6 The Shooting Menus MIC JACK SETTING Specify the type of hardware connected to the microphone jack. Option MIC LINE Description Choose this option for direct connection to an external microphone. Choose this option for external audio devices connected via line output. MIC LEVEL LIMITER Reduces distortion caused by input that exceeds the limits of the microphone’s audio circuits. Options ON 156 OFF MOVIE SETTING (Still Photography) WIND FILTER Choose whether to enable wind noise reduction during movie recording. Options ON OFF LOW CUT FILTER Choose whether to enable the low-cut filter, reducing low-frequency noise during movie recording. Options ON OFF HEADPHONES VOLUME Adjust the headphone volume. Option 0 1—10 Description Mute output to the headphones. Choose a volume of from 1 to 10. Options m MIC n REMOTE 157 6 The Shooting Menus MIC/REMOTE RELEASE Specify whether the device connected to the microphone/remote release connector is a microphone or a remote release. MOVIE SETTING (Movie Recording) Adjust options for movies shot with the drive dial rotated to F (movie). To display options for movie recording, press MENU/OK in the movie shooting display and select the B (MOVIE SETTING) tab. N The options available vary with the shoot- MOVIE SETTING MOVIE MODE FILE FORMAT FULL HD HIGH SPEED REC FIX MOVIE CROP MAGNIFICATION F-Log RECORDING 4K MOVIE OUTPUT FULL HD MOVIE OUTPUT HDMI OUTPUT INFO DISPLAY EXIT ing mode selected. MOVIE MODE Before shooting movies, choose the frame rate, bit rate, and frame size and aspect ratio. 6 1 MOVIE MODE The Shooting Menus In the shooting menu, select B MOVIE SETTING, then highlight MOVIE MODE and press MENU/OK. 158 MOVIE SETTING (Movie Recording) 2 Press the focus stick (focus lever) up or down to highlight the desired frame size and aspect ratio (A) and press the stick right. • Choose V16 : 9 or d17 : 9 for 4K movies with aspect ratios of 16 or 17 to 9. • Choose W16 : 9 or W17 : 9 for Full HD movies with aspect ratios of 16 or 17 to 9. 3 Press the focus stick (focus lever) up or down to highlight a frame rate (B) and press the stick right. 23.98P 4 24P 25P Options 29.97P 50P 59.94P Press the focus stick up or down to highlight a bit rate (C) and press MENU/OK. Options 100Mbps 50Mbps 200Mbps N The choice of frame and bit rates varies with the movie mode. 6 Option MOV/H.264 LPCM MP4/H.264 AAC Description High picture and sound quality. A format suitable for movies that will be uploaded to the web. N Movies are recorded to the memory card in 8-bit 4∶2∶0 and output to HDMI in 10-bit 4∶2∶2. 159 The Shooting Menus FILE FORMAT Choose a movie format. FULL HD HIGH SPEED REC Record high-frame-rate Full HD movies. High-frame-rate movies can be played back in slow motion, giving you time to view fast-moving subjects or details too fleeting for the naked eye. Select ON to choose the recording and playback rates separately. Playback 23.98P 24P Options 25P 29.97P 50P 59.94P Recording Options 100P 120P 200P 240P N • High-speed movies are recorded with no sound. • Maximum recording length is 6 minutes, but varies with camera settings. 6 • The footage recorded to the memory card is compressed with the The Shooting Menus goal of keeping the amount of data recorded to 200 Mbps per second. • The options available for playback rate vary with the option selected for rate of recording. 160 MOVIE SETTING (Movie Recording) FIX MOVIE CROP MAGNIFICATION Fix the movie crop ratio at 1.29∶1. This makes it easier to match crops when filming in different formats. Options ON OFF F-Log RECORDING Select ON to record movies using a soft gamma curve with a wide gamut suitable for further processing post-production. Sensitivity is restricted to values between ISO 640 and 12800. Options ON OFF 6 The Shooting Menus 161 4K MOVIE OUTPUT Choose the destination for 4K movies shot while the camera is connected to an HDMI recorder or other device that supports 4K. Option b 4K Y 4K b 4K Y FHD b FHD Y 4K b − Y 4K Description 4K movies are recorded to the camera memory card and output to the HDMI device in 4K. 4K movies are recorded to a camera memory card in 4K and output to the HDMI device in Full HD. 4K movies are output to the HDMI device in 4K and recorded to the camera memory card in Full HD. 4K movies are output to the HDMI device in 4K. The camera does not record 4K movies to a memory card. N This option is only available when V 16 : 9 or d 17 : 9 is selected for B MOVIE SETTING > MOVIE MODE in the shooting menu. 6 FULL HD MOVIE OUTPUT Choose the destination for Full HD movies shot while the camera is connected to an HDMI device. The Shooting Menus Option Description Full HD movies are output to the HDMI device and recorded to b FHD Y FHD the camera memory card. Full HD movies are not recorded to the camera memory card b − Y FHD but are output to the HDMI device. N • This option is only available when W 16 : 9 or W 17 : 9 is selected for B MOVIE SETTING > MOVIE MODE in the shooting menu. • When OFF is selected for HDMI OUTPUT INFO DISPLAY, movies will be output to the HDMI device in 4:2:2 10-bit format. 162 MOVIE SETTING (Movie Recording) HDMI OUTPUT INFO DISPLAY If ON is selected, HDMI devices to which the camera is connected will mirror the information in the camera display. Options ON OFF 4K HDMI STANDBY QUALITY Choose whether output to connected HDMI devices switches from 4K to Full HD during standby. Option V W Description Output to HDMI devices continues at 4K during standby. Output to HDMI devices switches to Full HD during standby, reducing the drain on the battery. HDMI REC CONTROL Choose whether the camera sends movie start and stop signals to the HDMI device when the shutter button is pressed to start and stop movie recording. OFF F PHOTOMETRY Options are the same as those for still photography, but settings must be adjusted separately (P 81). N The photometry option selected in the photo menus applies to movies recorded using function buttons that have been assigned MOVIE RECORDING RELEASE. 163 The Shooting Menus Options ON 6 F IS MODE Enable or disable image stabilization. Option l CONTINUOUS OFF Description Image stabilization on. Image stabilization off ; x appears in the display. Choose when the camera is mounted on a tripod or otherwise fixed in place. N • Image stabilization is available with compatible lenses only. • The setting selected with the lens image stabilization switch, if any, takes priority over the setting chosen with the IS mode. • Note that vibration or camera sounds may be noticeable as image stabilization takes effect. F ISO Adjust the camera’s sensitivity to light. Option 6 H (25600) The Shooting Menus 160–12800 AUTO 164 Description Choose for special situations. Note that dynamic range may be reduced and that pictures may be mottled. Adjust sensitivity manually. Selected value is shown in display. Sensitivity is automatically adjusted in response to shooting conditions. MOVIE SETTING (Movie Recording) ZEBRA SETTING Highlights that may be overexposed are shown by zebra stripes in the movie mode display. Option ZEBRA RIGHT ZEBRA LEFT OFF Description Right-slanting stripes. Left-slanting stripes. Stripes off. ZEBRA LEVEL Choose the brightness threshold for the zebra stripe display. 50 55 60 65 70 Options 75 80 85 90 95 100 MOVIE OPTIMIZED CONTROL oL Select ON to allow movie settings to be adjusted using only the command dials and touch-screen controls. You may find this helpful in preventing the sounds of camera controls being recorded with movies (P 23). The Shooting Menus Options ON 6 OFF 165 MOVIE SETTING (Movie Recording) TALLY LIGHT Choose the lamp (indicator or AF-assist) that lights during movie recording and whether the lamp blinks or remains steady. Indicator lamp 6 The Shooting Menus Option FRONT OFF REAR z FRONT OFF REAR y FRONT z REAR z FRONT z REAR OFF FRONT y REAR y FRONT y REAR OFF FRONT OFF REAR OFF AF-assist illuminator Description The indicator lamp lights during movie recording. The indicator lamp blinks during movie recording. The indicator and AF-assist lamps light during movie recording. The AF-assist lamp lights during movie recording. The indicator and AF-assist lamps blink during movie recording. The AF-assist lamp blinks during movie recording. The indicator and AF-assist lamps remain off during movie recording. xF WIRELESS COMMUNICATION This item is also found in the photo menus (P 151). 166 IMAGE QUALITY SETTING (Movie Recording) Adjust image quality settings for movies. To display image quality settings, press MENU/OK in the movie shooting display and select the H (IMAGE QUALITY SETTING) tab. IMAGE QUALITY SETTING FILM SIMULATION MONOCHROMATIC COLOR WHITE BALANCE DYNAMIC RANGE TONE CURVE COLOR SHARPNESS HIGH ISO NR EXIT N The options available vary with the shooting mode selected. F FILM SIMULATION Options are the same as those for still photography, but settings must be adjusted separately (P 106). F MONOCHROMATIC COLOR Options are the same as those for still photography, but settings must be adjusted separately (P 108). 167 6 The Shooting Menus F WHITE BALANCE Options are the same as those for still photography, but settings must be adjusted separately (P 109). F DYNAMIC RANGE Choose a dynamic range for movie recording. Option V100% W200% X400% Description See “DYNAMIC RANGE” (P 113). N • AUTO (automatic dynamic range control) is not available during movie recording. • W200% is available at sensitivities of from ISO 320 to ISO 12800, X400% at sensitivities of from ISO 640 to 12800. • The B MOVIE SETTING > F DYNAMIC RANGE option is available when OFF is selected for B MOVIE SETTING > F-Log RECORDING. F TONE CURVE Options are the same as those for still photography, but settings must be adjusted separately (P 114). 6 The Shooting Menus F COLOR Options are the same as those for still photography, but settings must be adjusted separately (P 115). 168 IMAGE QUALITY SETTING (Movie Recording) F SHARPNESS Options are the same as those for still photography, but settings must be adjusted separately (P 115). F HIGH ISO NR Options are the same as those for still photography, but settings must be adjusted separately (P 115). V INTERFRAME NR Select ON to enable interframe noise reduction. Options ON OFF N • Interframe noise reduction is available only when frame rates of 29.97P or slower are selected at a frame size of V or d. • “Ghosting” may occur with moving subjects or if the camera is moved during shooting. 6 The Shooting Menus 169 IMAGE QUALITY SETTING (Movie Recording) F PERIPHERAL LIGHT CORRECTION Select ON to enable peripheral illumination correction during movie recording. Options ON OFF N • If ON is selected when a lens that does not transmit data to the camera is attached using a FUJIFILM M MOUNT ADAPTER (available separately), peripheral illumination will be adjusted according to the option selected for H IMAGE QUALITY SETTING > xF MOUNT ADAPTOR SETTING > PERIPHERAL ILLUMINATION CORRECTION in the shooting menu (P 125). • Select OFF if you notice banding in movies recorded using this option. xF MOUNT ADAPTOR SETTING This item is also found in the photo menus (P 123). Changes to one apply to the other. 6 The Shooting Menus 170 AF/MF SETTING (Movie Recording) Adjust focus settings for movies. To display AF/MF settings, press MENU/OK in the movie shooting display and select the G (AF/MF SETTING) tab. AF/MF SETTING FOCUS AREA AF MODE AF-C CUSTOM SETTING AF ILLUMINATOR FACE/EYE DETECTION SETTING MF ASSIST FOCUS CHECK INSTANT AF SETTING EXIT N The options available vary with the shooting mode selected. F FOCUS AREA Options are the same as those for still photography, but settings must be adjusted separately (P 69). F AF MODE Choose how the camera selects the focus point for movie recording. Option MULTI AREA Description The camera selects the focus area automatically. The camera focuses on the subject in the selected focus area. 6 The Shooting Menus 171 F AF-C CUSTOM SETTING Select focus-tracking options when recording movies in focus mode C. TRACKING SENSITIVITY Choose how long the camera waits to switch focus when an object enters the focus area behind or in front of the current subject. See “TRACKING SENSITIVITY” (P 128). 0 Options 2 1 3 4 O • The higher the value, the longer it takes the camera to refocus when you attempt to switch subjects. • The lower the value, the more likely the camera is to switch focus from your subject to other objects in the focus area. 6 AF SPEED Adjust the autofocus response speed. Choose higher values for faster response times, lower values for slower response times. The Shooting Menus −5 −4 −3 −2 −1 Options 0 +1 +2 +3 +4 +5 xF AF ILLUMINATOR This item is also found in the photo menus (P 132). Changes to one apply to the other. 172 AF/MF SETTING (Movie Recording) F FACE/EYE DETECTION SETTING Enable or disable Intelligent Face Detection when recording movies. Option FACE DETECTION ON OFF Description See “FACE/EYE DETECTION SETTING” (P 133). Intelligent Face Detection and eye priority off. O If the focus mode selector is rotated to S when FACE DETECTION ON is selected for G AF/MF SETTING > FACE/EYE DETECTION SETTING during movie recording, the camera will automatically switch to C (continuous AF). Selecting M (manual focus) when FACE DETECTION ON is selected for FACE/EYE DETECTION SETTING disables Intelligent Face Detection. F MF ASSIST Choose how focus is displayed in manual focus mode. Option STANDARD Description Focus is displayed normally (focus peaking is not available). The camera heightens high-contrast outlines. Choose a FOCUS PEAK HIGHLIGHT color and peaking level. 6 The Shooting Menus 173 F FOCUS CHECK Options are the same as those for still photography, but settings must be adjusted separately (P 136). xF INSTANT AF SETTING This item is also found in the photo menus (P 137). Changes to one apply to the other. xF DEPTH-OF-FIELD SCALE This item is also found in the photo menus (P 137). Changes to one apply to the other. xF AF RANGE LIMITER This item is also found in the photo menus (P 138). Changes to one apply to the other. 6 The Shooting Menus 174 AF/MF SETTING (Movie Recording) xF TOUCH SCREEN MODE Choose the shooting operations performed using touch controls. Mode OFF Touch controls disabled. 175 6 The Shooting Menus Description Instead of pressing the shutter button, you can tap your subject in the display to focus and start recording. During recording, you TOUCH SHOOTING can tap the display to focus as described below. To end recording, press the shutter button. Tapping the display focuses the camera on the selected point. Use the shutter button to start and stop recording. • In focus mode S (AF-S), you can refocus at any time by tapping your subject in the display. • In focus mode C (AF-C), the camera will continuously adjust focus for changes in the distance to the subject at point seAF lected by tapping the display. • When shooting movies in focus mode M (MF), you can tap the display before recording begins to focus on the selected point using Instant AF, and tap the display during recording to position the focus point. Tap to position the focus area. Use the shutter button to start and stop recording. • In focus mode S (AF-S), you can reposition the focus area at any time by tapping your subject in the display. To focus, use the button to which AF-ON is assigned. AREA • In focus mode C (AF-C), the camera will continuously adjust focus for changes in the distance to the subject at point selected by tapping the display. • In manual focus mode (MF), you can tap the display to position the focus area over your subject. N • To disable touch controls and hide the touch screen mode indicator, select OFF for D BUTTON/DIAL SETTING > TOUCH SCREEN SETTING > x TOUCH SCREEN SETTING. • This item is also found in the photo menus (P 139). Changes to one apply to the other. Touch Controls for Focus Zoom Different touch controls are used during focus zoom (focus check enabled). Central Area Tapping the center of the display performs the operations below. Mode TOUCH SHOOTING AF 6 The Shooting Menus AREA OFF Operation performed AF-S: AF MF: Instant AF AF-S: AF MF: Instant AF AF-S: AF MF: Instant AF AF-S/MF: OFF Other Areas Tapping other areas simply scrolls the display, whether during still photography or movie recording and regardless of the option selected for touch screen mode. 176 AF/MF SETTING (Movie Recording) FOCUS CHECK LOCK Choose whether focus zoom remains in effect once movie recording begins. Options ON OFF 6 The Shooting Menus 177 AUDIO SETTING (Movie Recording) Adjust settings for audio recorded during filming. To display audio settings, press MENU/OK in the movie shooting display and select the P (AUDIO SETTING) tab. AUDIO SETTING INTERNAL MIC LEVEL ADJUSTMENT EXTERNAL MIC LEVEL ADJUSTMENT MIC JACK SETTING MIC LEVEL LIMITER WIND FILTER LOW CUT FILTER HEADPHONES VOLUME MIC/REMOTE RELEASE EXIT INTERNAL MIC LEVEL ADJUSTMENT Adjust the recording level for the built-in microphone. Option AUTO MANUAL OFF 6 Description The camera adjusts the recording level automatically. Adjust the recording level manually. Press the focus stick (focus lever) right to choose from 25 recording levels. Turn the built-in microphone off. EXTERNAL MIC LEVEL ADJUSTMENT Adjust the recording level for external microphones. The Shooting Menus Option AUTO MANUAL OFF 178 Description The camera adjusts the recording level automatically. Adjust the recording level manually. Press the focus stick (focus lever) right to choose from 25 recording levels. Disable recording using external microphones. AUDIO SETTING (Movie Recording) MIC JACK SETTING Specify the type of hardware connected to the microphone jack. Option MIC LINE Description Choose this option for direct connection to an external microphone. Choose this option for external audio devices connected via line output. MIC LEVEL LIMITER Reduces distortion caused by input that exceeds the limits of the microphone’s audio circuits. Options ON OFF WIND FILTER Choose whether to enable wind noise reduction during movie recording. 6 Options OFF LOW CUT FILTER Choose whether to enable the low-cut filter, reducing low-frequency noise during movie recording. Options ON OFF HEADPHONES VOLUME Adjust the headphone volume. Option 0 1—10 Description Mute output to the headphones. Choose a volume of from 1 to 10. 179 The Shooting Menus ON AUDIO SETTING (Movie Recording) MIC/REMOTE RELEASE Specify whether the device connected to the microphone/remote release connector is a microphone or a remote release. Options m MIC 6 The Shooting Menus 180 n REMOTE TIME CODE SETTING (Movie Recording) Adjust time code (hour, minute, second, and frame number) display settings for movie recording. To display time code settings, press MENU/OK in the movie shooting display and select the Q (TIME CODE SETTING) tab. TIME CODE SETTING TIME CODE DISPLAY START TIME SETTING COUNT UP SETTING DROP FRAME HDMI TIME CODE OUTPUT EXIT TIME CODE DISPLAY Select ON to display time codes during movie recording and playback. Options ON OFF START TIME SETTING Choose the time code starting time. Option COUNT UP SETTING Choose whether time is clocked continuously or only during movie recording. Option REC RUN FREE RUN Description Time is clocked only during movie recording. Time is clocked continuously. 181 6 The Shooting Menus Description Highlight this option and press the focus stick (focus lever) MANUAL INPUT right to choose a start time manually. CURRENT TIME Set the start time to the current time. RESET Set the start time to 00:00:00. TIME CODE SETTING (Movie Recording) DROP FRAME At frame rates of 59.94P, and 29.97P, a discrepancy will gradually develop between the time code (measured in seconds) and the actual recording time (measured in fractions of a second). Choose whether the camera drops frames as necessary to match the recording time to the time code. Option ON OFF Description The camera drops frames as necessary to maintain a strict match between the time code and the actual recording time. Frames are not dropped. N • The time code display varies with the option selected. ON OFF 6 • Selecting a frame rate of 23.98P disables frame drop. The Shooting Menus HDMI TIME CODE OUTPUT Choose whether time codes are output to HDMI devices. Options ON 182 OFF Playback and the Playback Menu 183 The Playback Display This section lists the indicators that may be displayed during playback. O For illustrative purposes, displays are shown with all indicators lit. A B CD E F G H h I Playback and the Playback Menu g f e d J K c b a Z L M Y X W 7 V U A Date and time..................................37, 39, 211 B Frame-number display C Face detection indicator ............................133 D Bluetooth ON/OFF.......................................239 E Image transfer order ...................................201 F Image transfer status ........................239, 282 G Number of frames selected for upload ....201 H Frame number..............................................236 I Sound and flash indicator ........................213 J Protected image ...........................................196 K Location data.......................................244, 283 L Battery level ......................................................36 M Image quality................................................105 N Image size ......................................................104 O Film format ....................................................159 P Film simulation ............................................106 Q Dynamic range ............................................113 184 T S R Q P ON R HDR ..................................................................142 S White balance ..............................................109 T Sensitivity ..........................................................79 U Exposure compensation ...............................77 V Aperture...............................................54, 59, 60 W Shutter speed .....................................54, 56, 60 X Playback mode indicator .............................44 Y Movie icon ........................................................51 Z Time code.......................................................181 a HDR image ....................................................142 b Red-eye removal indicator...............152, 198 c Filter ....................................................................96 d Gift image .........................................................44 e Photobook assist indicator .......................203 f DPOF print indicator ...................................205 g Voice memo ..................................................199 h Rating..............................................................200 The Playback Display The DISP/BACK Button The DISP/BACK button controls the display of indicators during playback. Standard Information off Playback and the Playback Menu NEXT Info display 7 185 The Playback Display Viewing Photo Information The photo information display changes each time the focus stick (focus lever) is pressed up. Basic data Playback and the Playback Menu 7 Info display 1 NEXT LENS FOCAL LENGTH COLOR SPACE LENS MODULATION OPT. S.S F 23.0mm F5.6 23.0mm sRGB ON ISO BACK Info display 3 NEXT Info display 2 Zooming in on the Focus Point Press the center of the rear command dial to zoom in on the focus point. Press again to return to full-frame playback. 186 Viewing Pictures Read this section for information on playback zoom and multi-frame playback. Use the rear command dial to go from full-frame playback to playback zoom or multi-frame playback. Full-frame playback Playback zoom Multi-frame playback DISP/BACK MENU/OK Nine-frame view Medium zoom Playback and the Playback Menu 100-0001 7 Hundred- frame view Maximum zoom 187 Viewing Pictures Playback Zoom Rotate the rear command dial right to zoom in on the current picture, left to zoom out. To exit zoom, press DISP/BACK or MENU/OK, or the center of the rear command dial. N • The maximum zoom ratio varies with the option selected for H IMAGE QUALITY SETTING > IMAGE SIZE. • Playback zoom is not available with cropped or resized copies saved at a size of a. Playback and the Playback Menu 7 Scroll When the picture is zoomed in, the focus stick (focus lever) can be used to view areas of the image not currently visible in the display. Navigation window Multi-Frame Playback To change the number of images displayed, rotate the rear command dial left when a picture is displayed full frame. N • Use the focus stick (focus lever) to highlight images and press MENU/OK to view the highlighted image full frame. • In the nine- and hundred-frame displays, press the focus stick up or down to view more pictures. 188 The Playback Menu Adjust playback settings. The playback menu is displayed when you press MENU/OK in playback mode. PLAY BACK MENU RAW CONVERSION ERASE CROP RESIZE PROTECT IMAGE ROTATE RED EYE REMOVAL VOICE MEMO SETTING EXIT Saving RAW Pictures in Another Format 1 2 3 Display a RAW picture. Highlight RAW CONVERSION in the playback menu. Press MENU/OK. A list of settings will be displayed. RAW CONVERSION REFLECT SHOOTING COND. IMAGE SIZE IMAGE QUALITY PUSH/PULL PROCESSING DYNAMIC RANGE D RANGE PRIORITY CREATE 4 5 CANCEL Press the focus stick (focus lever) up or down to highlight a setting. Press the focus stick right to display RAW CONVERSION options. 100% 200% 400% 189 Playback and the Playback Menu RAW CONVERSION Even if you don’t have a computer, you can use the camera to modify RAW pictures and save them in other formats. 7 6 7 Press the focus stick up or down to highlight the desired option. 8 Press the Q button. A preview of the copy will be displayed. 9 Press MENU/OK. The copy will be saved. Press MENU/OK to select the highlighted option. The settings list shown in Step 3 will be displayed. Repeat Steps 4 to 7 to adjust additional settings. Playback and the Playback Menu N RAW conversion options can also be displayed by pressing the Q button when a RAW pictures is displayed during playback. 7 190 The Playback Menu The settings that can be adjusted when converting pictures from RAW to another format are: Setting O Some settings may be unavailable depending on the options chosen when the picture was taken. 191 Playback and the Playback Menu Description Create a copy using the settings in effect at the time REFLECT SHOOTING COND. the photo was taken. IMAGE SIZE Choose an image size. IMAGE QUALITY Adjust image quality. PUSH/PULL PROCESSING Adjust exposure. DYNAMIC RANGE Enhance details in highlights for natural contrast. Reduce loss of detail in highlights and shadows D RANGE PRIORITY for natural-looking results when photographing high-contrast scenes. FILM SIMULATION Simulate the effects of different types of film. Choose a monochrome tint for photographs takMONOCHROMATIC COLOR en using FILM SIMULATION > a ACROS and b MONOCHROME. GRAIN EFFECT Add a film grain effect. Increase the range of tones available for rendering COLOR CHROME EFFECT colors that tend to be highly saturated, such as reds, yellows, and greens. Increase the range of tones available for rendering COLOR CHROME FX BLUE blues. WHITE BALANCE Adjust white balance. WB SHIFT Fine-tune white balance. TONE CURVE Adjust highlights and shadows. COLOR Adjust color density. SHARPNESS Sharpen or soften outlines. HIGH ISO NR Process the copy to reduce mottling. CLARITY Increase definition. Improve definition by adjusting for diffraction and LENS MODULATION OPTIMIZER the slight loss of focus at the periphery of the lens. COLOR SPACE Choose the color space used for color reproduction. HDR Reduce loss of detail in highlights and shadows. 7 ERASE Delete individual pictures, multiple selected pictures, or all pictures. O Deleted pictures cannot be recovered. Protect important pictures or copy them to a computer or other storage device before proceeding. Option FRAME SELECTED FRAMES ALL FRAMES Description Delete pictures one at a time. Delete multiple selected pictures. Delete all unprotected pictures. Playback and the Playback Menu FRAME 1 Select FRAME for ERASE in the playback menu. 2 Press the focus stick (focus lever) left or right to scroll through pictures and press MENU/OK to delete. N • A confirmation dialog is not displayed before pictures are deleted; be sure the correct picture is selected before pressing MENU/OK. • Additional pictures can be deleted by pressing MENU/OK. Press the focus stick left or right to scroll through pictures and press MENU/OK to delete. 7 192 The Playback Menu SELECTED FRAMES 1 Select SELECTED FRAMES for ERASE in the playback menu. Highlight pictures and press MENU/OK to select. • Selected pictures are indicated by check marks (R). • To deselect a highlighted picture, press MENU/OK again. 3 When the operation is complete, press DISP/BACK to display a confirmation dialog. 4 Highlight OK and press MENU/OK to delete the selected pictures. N Pictures in photobooks or printer orders are shown by S. ALL FRAMES 1 Select ALL FRAMES for ERASE in the playback menu. 2 A confirmation dialog will be displayed; highlight OK and press MENU/OK to delete all unprotected pictures. N • Pressing DISP/BACK cancels deletion; note that any pictures deleted before the button was pressed cannot be recovered. • If a message appears stating that the selected images are part of a DPOF print order, press MENU/OK to delete the pictures. 193 Playback and the Playback Menu 2 7 CROP Create a cropped copy of the current picture. Playback and the Playback Menu 1 2 3 Display the desired picture. 4 5 Press MENU/OK to display a confirmation dialog. Select CROP in the playback menu. Use the rear command dial to zoom in and out and press the focus stick (focus lever) up, down, left, or right to scroll the picture until the desired portion is displayed. Press MENU/OK again to save the cropped copy to a separate file. N • The higher the zoom ratio, the smaller the number of pixels in the cropped copy. • If the size of the final copy will be a, YES will be displayed in yellow. • All copies have an aspect ratio of 3∶2. 7 194 The Playback Menu RESIZE Create a small copy of the current picture. 1 2 3 Display the desired picture. 4 Press MENU/OK again to save the resized copy to a separate file. Select RESIZE in the playback menu. Highlight a size and press MENU/OK to display a confirmation dialog. Playback and the Playback Menu N The sizes available vary with the size of the original image. 7 195 PROTECT Protect pictures from accidental deletion. Highlight one of the following options and press MENU/OK. Option FRAME SET ALL RESET ALL Description Protect selected pictures. Press the focus stick (focus lever) left or right to view pictures and press MENU/OK to select or deselect. Press DISP/BACK when the operation is complete. Protect all pictures. Remove protection from all pictures. Playback and the Playback Menu O Protected pictures will be deleted when the memory card is formatted. N Protecting images currently selected for upload to paired smartphones or tablets removes upload marking. 7 196 The Playback Menu IMAGE ROTATE Rotate pictures. 1 2 3 4 Select ON for D SCREEN SET-UP > AUTOROTATE PB. 5 Press MENU/OK. The picture will automatically be displayed in the selected orientation whenever it is played back on the camera. Display the desired picture. Select IMAGE ROTATE in the playback menu. Press the focus stick (focus lever) down to rotate the picture 90° clockwise, up to rotate it 90° counterclockwise. tating pictures. • The camera may not be able to rotate pictures created with other devices. Pictures rotated on the camera will not be rotated when viewed on a computer or on other cameras. • Pictures taken with D SCREEN SET-UP > AUTOROTATE PB are automatically displayed in the correct orientation during playback. Playback and the Playback Menu N • Protected pictures cannot be rotated. Remove protection before ro- 7 197 RED EYE REMOVAL Remove red-eye from portraits. The camera will analyze the image; if red-eye is detected, the image will be processed to create a copy with reduced red-eye. 1 2 3 Display the desired picture. Select RED EYE REMOVAL in the playback menu. Press MENU/OK. N • Results vary depending on the scene and the camera’s success in dePlayback and the Playback Menu tecting faces. • The amount of time needed to process the image varies with the number of faces detected. • Red eye cannot be removed from pictures that have already been processed using red-eye removal, which are indicated by a e icon during playback. • Red eye removal cannot be performed on RAW images. 7 198 The Playback Menu VOICE MEMO SETTING Add a voice memo to the current photograph. 1 2 3 Select ON for VOICE MEMO SETTING in the playback menu. Display a photo to which you wish to add a voice memo. Press and hold the center of the front command dial to record the memo. Recording ends after 30 s or when you release the dial. N • The new memo will be recorded over any existing memos. Playing Voice Memos Pictures with voice memos are indicated by q icons during playback. • To play a memo, select the picture and press the center of the front command dial. • A progress bar will be displayed while the memo plays back. • Volume can be adjusted by pressing MENU/OK to pause playback and then pressing the focus stick (focus lever) up or down to adjust the volume. Press MENU/OK again to resume playback. Volume can also be adjusted using D SOUND SET-UP > PLAYBACK VOLUME. Playback and the Playback Menu • Voice memos cannot be added to protected pictures. • Deleting the picture also deletes the memo. 7 199 RATING Rate pictures using stars. 1 2 Select RATING in the playback menu. Rotate the front command dial to choose a picture and the rear command dial to choose a rating of from 0 to 5 stars (“I”). N • The focus stick (focus lever) can be used in place of the front command dial to choose a picture. Playback and the Playback Menu • The rating dialog can also be displayed by pressing the AE-L button in single-frame, nine-frame, or hundred-frame playback. • Use touch controls to zoom in or out. • Ratings cannot be applied to: - Protected pictures - Movie - “Gift” pictures (pictures taken with other cameras) 7 200 The Playback Menu IMAGE TRANSFER ORDER Select photos for upload to a paired smartphone or tablet. 1 Select IMAGE TRANSFER ORDER > SELECT FRAMES in the playback menu. 2 Highlight photos and press MENU/OK to select or deselect. Repeat until all the desired photos have been selected. 3 Press DISP/BACK to exit to playback. N If ON is selected for both D CONNECTION SETTING > Bluetooth N • Image transfer orders can contain a maximum of 999 pictures. • The following cannot be selected for upload: - Protected pictures - Movies - RAW images - “Gift” pictures (pictures taken with other cameras) • If PAIRING/TRANSFER ORDER is selected for D CONNECTION SETTING > GENERAL SETTINGS > r BUTTON SETTING, the IMAGE TRANSFER ORDER dialog can be displayed by pressing the Fn1 button. • To remove upload marking from all pictures in the current order, select IMAGE TRANSFER ORDER > RESET ORDER. • If ON is selected for D CONNECTION SETTING > Bluetooth SETTINGS > AUTO IMAGE TRANSFER, photos will automatically be marked for upload as they are taken. 201 Playback and the Playback Menu SETTINGS > Bluetooth ON/OFF and AUTO IMAGE TRANSFER, upload will begin shortly after you exit to playback or turn the camera off. 7 xF WIRELESS COMMUNICATION Connect to smartphones running the latest version of the FUJIFILM Camera Remote app. The smartphone can then be used to: • Control the camera and take pictures remotely • Receive pictures uploaded from the camera • Browse the pictures on the camera and download selected pictures • Upload location data to the camera N • For downloads and other information, visit: Playback and the Playback Menu 7 http://app.fujifilm-dsc.com/en/camera_remote/ WIRELESS COMMUNICATION is selected for D CONNECTION SETTING > GENERAL SETTINGS > r BUTTON SETTING, you can connect to the smartphone by pressing the Fn1 button. • If SLIDE SHOW View pictures in an automated slide show. Press MENU/OK to start and press the focus stick (focus lever) right or left to skip ahead or back. Press DISP/BACK at any time during the show to view onscreen help. The show can be ended at any time by pressing MENU/OK. N The camera will not turn off automatically while a slide show is in progress. 202 The Playback Menu PHOTOBOOK ASSIST Create books from your favorite photos. Creating a Photobook 1 Select NEW BOOK for C PLAY BACK MENU > PHOTOBOOK ASSIST. 2 Scroll through the images and press the focus stick (focus lever) up to select or deselect. Press MENU/OK to exit when the book is complete. for photobooks. • The first picture selected becomes the cover image. A different picture can be selected at any time. 3 Highlight COMPLETE PHOTOBOOK and press MENU/OK (to select all photos for the book, choose SELECT ALL). The new book will be added to the list in the photobook assist menu. N • Books can contain up to 300 pictures. • Books that contain no photos are automatically deleted. Playback and the Playback Menu N • Neither photographs a or smaller nor movies can be selected 7 203 Viewing Photobooks Highlight a book in the photobook assist menu and press MENU/OK to display the book, then press the focus stick (focus lever) left or right to scroll through the pictures. Playback and the Playback Menu Editing and Deleting Photobooks Display the photobook and press MENU/OK. The following options will be displayed; select the desired option and follow the onscreen instructions. • EDIT: Edit the book as described in “Creating a Photobook”. • ERASE: Delete the book. PC AUTO SAVE Upload pictures from the camera to a computer running the latest version of FUJIFILM PC AutoSave (note that you must first install the software and configure the computer as a destination for images copied from the camera). N For downloads and other information, visit: http://app.fujifilm-dsc.com/en/pc_autosave/ 7 204 The Playback Menu PRINT ORDER (DPOF) Create a digital “print order” for DPOF-compatible printers. 1 2 Select C PLAY BACK MENU > PRINT ORDER (DPOF). 3 Display a picture you wish to include in or remove from the print order. 4 Press the focus stick (focus lever) up or down to choose the number of copies (up to 99). Select WITH DATE s to print the date of recording on pictures, WITHOUT DATE to print pictures without dates, or RESET ALL to remove all pictures from the print order before proceeding. Total number of prints Number of copies Playback and the Playback Menu N • To remove a picture from the order, press the focus stick down 7 PRINT ORDER (DPOF) DPOF: 00001 01 SHEETS FRAME SET until the number of copies is 0. • Repeat steps 3–4 to complete the print order. 5 The total number of prints is displayed in the monitor. Press MENU/OK to exit. N • The pictures in the current print order are indicated by a u icon during playback. • Print orders can contain a maximum of 999 pictures from a single memory card. • If a memory card is inserted containing a print order created by another camera, you will need to delete the order before creating as described above. 205 instax PRINTER PRINT To print pictures to optional Fujifilm instax SHARE printers, first select D CONNECTION SETTING > instax PRINTER CONNECTION SETTING and enter the instax SHARE printer name (SSID) and password, then follow the steps below. 1 2 Playback and the Playback Menu 7 Turn the printer on. Select C PLAY BACK MENU > instax PRINTER PRINT. The camera will connect to the printer. PRINTER PRINT instax-12345678 CONNECTING FUJIFILM-CAMERA-1234 CANCEL 3 Use the focus stick (focus lever) to display the picture you want to print, then press MENU/OK. The picture will be sent to the printer and printing will start. PRINTER PRINT 100-0020 SET instax-12345678 CANCEL N • Pictures taken with other cameras cannot be printed. • The area printed is smaller than the area visible in the LCD monitor. • The displays may vary depending on the printer connected. 206 The Playback Menu DISP ASPECT Choose the aspect ratio used for the display of still pictures on High Definition (HD) devices (this option is available only when an HDMI cable is connected). 16:9 3: 2 Options 3:2 N Choose 16 : 9 to display photos with an aspect ratio of 16 : 9 full screen. The pictures will be displayed full screen with tops and bottoms cropped out. Playback and the Playback Menu 16 : 9 7 207 MEMO 208 The Setup Menus 209 USER SETTING Adjust basic camera settings. To access basic camera settings, press MENU/OK, select the D (SET UP) tab, and choose USER SETTING. USER SETTING FORMAT DATE/TIME TIME DIFFERENCE a MY MENU SETTING MY MENU SETTING SENSOR CLEANING SOUND & FLASH EXIT FORMAT To format a memory card: 1 2 The Setup Menus 8 Select D USER SETTING > FORMAT in the D (SET UP) tab. A confirmation dialog will be displayed. To format the memory card, highlight OK and press MENU/OK. FORMAT FORMAT OK? OK CANCEL N To exit without formatting the memory card, select CANCEL or press DISP/BACK. O • All data—including protected pictures—will be deleted from the memory card. Be sure important files have been copied to a computer or other storage device. • Do not open the battery-chamber cover during formatting. N The format menu can also be displayed by pressing the center of the rear command dial while pressing and holding the b button. 210 USER SETTING DATE/TIME To set the camera clock: 1 2 Select D USER SETTING > DATE/TIME in the D (SET UP) tab. 3 Press MENU/OK to set the clock. Press the focus stick (focus lever) left or right to highlight the year, month, day, hour, or minute and press up or down to change. To change the order in which the year, month, and day are displayed, highlight the date format and press the focus stick up or down. TIME DIFFERENCE Switch the camera clock instantly from your home time zone to the local time at your destination when traveling. To specify the difference between your local and home time zone: Highlight g LOCAL and press MENU/OK. Use the focus stick (focus lever) to choose the time difference between local time and your home time zone. Press MENU/OK when settings are complete. To set the camera clock to local time, highlight g LOCAL and press MENU/OK. To set the clock to the time in your home time zone, select h HOME. Options g LOCAL h HOME N If g LOCAL is selected, g will be displayed in yellow for about three seconds when the camera is turned on. 211 The Setup Menus 1 2 8 Qa Choose a language. x MY MENU SETTING Edit the items listed in the E (MY MENU) tab, a personalized custom menu of frequently-used photo menu options (P 247). F MY MENU SETTING Edit the items listed in the E (MY MENU) tab, a personalized custom menu of frequently-used movie menu options (P 247). The Setup Menus 8 212 USER SETTING SENSOR CLEANING Remove dust from the camera image sensor. Option OK Description Clean the sensor immediately. Sensor cleaning will be performed when the camera is WHEN SWITCHED ON turned on. Sensor cleaning will be performed when the camera turns WHEN SWITCHED OFF off (sensor cleaning is not however performed if the camera turns off in playback mode). N Dust that cannot be removed using sensor cleaning can be removed using a blower (P 312). SOUND & FLASH Select OFF to disable the speaker, flash, illuminator, and self-timer lamp in situations in which camera sounds and lights may be unwelcome. The Setup Menus Options ON OFF 8 213 USER SETTING RESET Reset shooting or setup menu options to default values. 1 Highlight the desired option and press MENU/OK. Option Description Reset all photo menu settings other than custom white STILL MENU RESET balance and custom settings banks created using EDIT/ SAVE CUSTOM SETTING to default values. Reset all settings other than custom white balance opMOVIE MENU RESET tions selected using F WHITE BALANCE. Reset all setup menu settings other than DATE/TIME, TIME DIFFERENCE, COPYRIGHT INFO, and conSET-UP RESET nection-related CONNECTION SETTING options to default values. 2 A confirmation dialog will be displayed; highlight OK and press MENU/OK. The Setup Menus REGULATORY To view electronic copies of the product model number, and other certificates, select D USER SETTING > REGULATORY in the setup menu. 8 214 SOUND SETTING Make changes to camera sounds. To access sound settings, press MENU/OK, select the D (SET UP) tab, and choose SOUND SET-UP. SOUND SETTING AF BEEP VOL. SELF-TIMER BEEP VOL. OPERATION VOL. SHUTTER VOLUME SHUTTER SOUND PLAYBACK VOLUME EXIT AF BEEP VOL. Choose the volume of the beep that sounds when the camera focuses. The beep can be muted by selecting eOFF. Options b (high) c (medium) d (low) eOFF (mute) Options b (high) c (medium) d (low) eOFF (mute) The Setup Menus SELF-TIMER BEEP VOL. Choose the volume of the beep that sounds while the self-timer is active. The beep can be muted by selecting eOFF. 8 215 SOUND SETTING OPERATION VOL. Adjust the volume of the sounds produced when camera controls are operated. Choose eOFF to disable control sounds. Options b (high) c (medium) d (low) eOFF (mute) SHUTTER VOLUME Adjust the volume of the sounds produced by the electronic shutter. Choose eOFF to disable the shutter sound. Options b (high) c (medium) d (low) eOFF (mute) SHUTTER SOUND Choose the sound made by the electronic shutter. The Setup Menus Options j SOUND 2 i SOUND 1 k SOUND 3 PLAYBACK VOLUME Adjust the volume for movie playback. 0 8 216 1 2 3 4 Options 5 6 7 8 9 10 SCREEN SETTING Make changes to display settings. To access display settings, press MENU/OK, select the D (SET UP) tab, and choose SCREEN SET-UP. SCREEN SETTING VIEW MODE SETTING EVF BRIGHTNESS EVF COLOR EVF COLOR ADJUSTMENT LCD BRIGHTNESS LCD COLOR LCD COLOR ADJUSTMENT IMAGE DISP. EXIT VIEW MODE SETTING Adjust settings for eye sensor, EVF (electronic viewfinder), or LCD monitor view modes (P 14). N Menus are not displayed in the LCD monitor when EVF ONLY is selected; to change settings, put your eye to the viewfinder. Option AUTO MANUAL Description Automatic brightness adjustment. Adjust brightness manually; choose from options between −7 and +5. EVF COLOR Adjust the saturation of the display in the electronic viewfinder. −5 −4 −3 −2 −1 Options 0 +1 +2 +3 +4 +5 217 The Setup Menus EVF BRIGHTNESS Adjust the brightness of the display in the electronic viewfinder. 8 EVF COLOR ADJUSTMENT Adjust the color of the display in the electronic viewfinder. 1 Adjust colors using the focus stick (focus lever). EVF COLOR ADJUSTMENT SET 2 CANCEL Press MENU/OK. LCD BRIGHTNESS Adjust monitor brightness. −5 The Setup Menus 8 −4 −3 −2 −1 Options 0 +1 +2 +3 +4 +5 Options 0 +1 +2 +3 +4 +5 LCD COLOR Adjust monitor saturation. −5 −4 −3 −2 −1 LCD COLOR ADJUSTMENT Adjust the color of the display in the LCD monitor. 1 2 Adjust colors using the focus stick (focus lever). Press MENU/OK. 218 SCREEN SETTING IMAGE DISP. Choose how long images are displayed after shooting. Option CONTINUOUS 1.5 SEC 0.5 SEC OFF Description Pictures are displayed until the MENU/OK button is pressed or the shutter button is pressed halfway. To zoom in on the active focus point, press the center of the rear command dial; press again to cancel zoom. Pictures are displayed for the selected time or until the shutter button is pressed halfway. Pictures are not displayed after shooting. N • Colors may differ slightly from those in the final image. • “Noise” mottling may be visible at high sensitivities. AUTOROTATE DISPLAYS Choose whether the indicators in the viewfinder and LCD monitor rotate to match camera orientation. The Setup Menus Options ON OFF 8 219 PREVIEW EXP./WB IN MANUAL MODE Choose whether to enable exposure and/or white balance preview in manual exposure mode. Option Description PREVIEW EXP./WB Enable exposure and white balance preview. Preview white balance only. Choose this option in situations in which exposure and white balance are likely to change during PREVIEW WB shooting, as may be the case when you use a flash with an incandescent monitoring lamp. Disable exposure and white balance preview. Choose this opOFF tion when using a flash or on other occasions on which exposure may change when the picture is taken. NATURAL LIVE VIEW Choose whether the effects of film simulation, white balance, and other settings are visible in the monitor. The Setup Menus Option ON 8 OFF 220 Description The effects of camera settings are not visible in the monitor, but shadows in low-contrast, back-lit scenes and other hardto-see subjects more visible. Colors and tone will differ from those in the final picture. The display will however be adjusted to show the effects of advanced filters and of monochrome and sepia settings. The effects of film simulation, white balance, and other settings can be previewed in the monitor. SCREEN SETTING F-Log VIEW ASSIST Select ON to display a tone-corrected preview (equivalent to BT.709) when recording or viewing F-log movies. Options ON OFF FRAMING GUIDELINE Choose a framing grid for shooting mode. F GRID 9 Display A six-by-four grid. H HD FRAMING Frame HD pictures in the crop shown by the lines at the top and bottom of the display. N Framing guides are not shown at default settings but can be displayed using D SCREEN SET-UP > DISP. CUSTOM SETTING (P 17). The Setup Menus For “rule of thirds” composition. Option G GRID 24 8 221 AUTOROTATE PB Choose ON to automatically rotate “tall” (portrait-orientation) pictures during playback. Options ON OFF FOCUS SCALE UNITS Choose the units used for the focus distance indicator. Options METERS The Setup Menus 8 FEET APERTURE UNIT FOR CINEMA LENS Choose whether the camera displays aperture as a T-number (used for movie camera lenses) or an f/-number (used for still camera lenses) when an optional FUJINON MKX-series lens is attached. For information on using cinema lenses, see the documentation provided with the lens. Option T NUMBER F NUMBER Description A measure of lens aperture commonly used by cinematographers. Lens transmittance is taken into account to better calculate exposure. A measure of lens aperture commonly used by photographers. Lens transmittance is assumed to be 100%, meaning that the same aperture may produce different exposures depending on the lens. DISP. CUSTOM SETTING Choose the items shown in the standard indicator display (P 17). 222 SCREEN SETTING LARGE INDICATORS MODE(EVF) Select ON to display large indicators in the electronic viewfinder. The indicators displayed can be selected using D SCREEN SET-UP > LARGE INDICATORS DISP. SETTING. 5 4 3 2 1 0 -1 -2 -3 -4 -5 OFF ON O Some icons are not displayed when ON is selected for LARGE INDICATORS MODE(EVF) (P 11). N If LARGE INDICATORS MODE is assigned to a function button, the button can be used to toggle LARGE INDICATORS MODE on (ON) and off (OFF) (P 255). The Setup Menus LARGE INDICATORS MODE(LCD) Select ON to display large indicators in the LCD monitor. The indicators displayed can be selected using D SCREEN SET-UP > LARGE INDICATORS DISP. SETTING. 8 OFF ON O Some icons are not displayed when ON is selected for LARGE INDICATORS MODE(LCD) (P 13). N If LARGE INDICATORS MODE is assigned to a function button, the button can be used to toggle LARGE INDICATORS MODE on (ON) and off (OFF) (P 255). 223 LARGE INDICATORS DISP. SETTING Choose the indicators displayed when ON is selected for D SCREEN SET-UP > LARGE INDICATORS MODE(EVF) or LARGE INDICATORS MODE(LCD). Option A Expo. DISP. B d Scale C L1, L2, L3, L4 D R1, R2, R3, R4 The Setup Menus 8 LARGE INDICATORS DISP. SETTING 224 Scale Description Choose the items listed at the bottom of the display. Selected items are indicated by check marks (R); to deselect, highlight the check marks and press MENU/OK. Select ON to display the exposure indicator. Choose up to four large icons for display on the left side of the screen. Choose up to four large icons for display on the right side of the screen. INFORMATION CONTRAST ADJ. Adjust display contrast. Option HIGH CONTRAST STANDARD LOW CONTRAST DARK AMBIENT LIGHTING Expo. DISP. Description High contrast. Normal contrast. Low contrast. Contrast adjusted for dim ambient lighting. SCREEN SETTING x Q MENU BACKGROUND Choose the background color used for the quick menu when it is displayed during still photography. Options TRANSPARENT BLACK F Q MENU BACKGROUND Choose the background color used for the quick menu when it is displayed during movie recording. Options TRANSPARENT BLACK The Setup Menus 8 225 BUTTON/DIAL SETTING Access options for camera controls. To access control options, press MENU/OK, select the D (SET UP) tab, and choose BUTTON/DIAL SETTING. BUTTON/DIAL SETTING FOCUS LEVER SETTING EDIT/SAVE QUICK MENU EDIT/SAVE QUICK MENU FUNCTION (Fn) SETTING COMMAND DIAL SETTING SHUTTER AF SHUTTER AE SHOOT WITHOUT LENS EXIT FOCUS LEVER SETTING Choose the functions performed by pressing the center of the focus stick (focus lever) or by pressing the stick up, down, left, or right. PUSH Option OFF The Setup Menus 8 Description Pressing the center of the stick has no effect. Press the center of the stick to view a focus-area display where you can choose the focus area. If FACE DETECTION EDIT FOCUS AREA ON is selected for FACE/EYE DETECTION SETTING, Intelligent Face Detection will be temporarily disabled. Press the center of the stick to zoom in on the active focus area (P 72). If FACE DETECTION ON is selected for ZOOM FACE/EYE DETECTION SETTING, Intelligent Face Detection will be temporarily disabled. 226 BUTTON/DIAL SETTING TILT o Option OFF DIRECT AF POINT SELECTION EDIT FOCUS AREA DIRECT AF POINT SELECTION/FACE SELECT Description Pressing the stick up, down, left, or right has no effect. Choose the focus area without leaving the shooting display. Press the stick up, down, left, or right to view a focus-area display and choose the focus area. Choose the focus area without leaving the shooting display. If FACE DETECTION ON is selected for FACE/EYE DETECTION SETTING, you can also choose the face used for focus. x EDIT/SAVE QUICK MENU Choose the items displayed in the quick menu during still photography (P 252). FUNCTION (Fn) SETTING Choose the roles played by the function buttons (P 255). The Setup Menus F EDIT/SAVE QUICK MENU Choose the items displayed in the quick menu when filming movies (P 252). 8 227 COMMAND DIAL SETTING Choose the roles played by the command dials. Option Description FRONT COMMAND Assign shutter speed (S.S. (PROGRAM SHIFT)) or aperDIAL 1 ture (APERTURE) 1 to FRONT COMMAND DIAL 1. FRONT COMMAND Assign shutter speed (S.S. (PROGRAM SHIFT)), aperture (APERTURE) 1, exposure compensation (EXP. DIAL 2 COMPENSATION) 2, sensitivity (ISO), or no role (NONE) FRONT COMMAND to FRONT COMMAND DIAL 2 or FRONT COMMAND DIAL 3 DIAL 3. Assign shutter speed (S.S. (PROGRAM SHIFT)), apREAR COMMAND erture (APERTURE) 1, exposure compensation (EXP. COMPENSATION) 2, sensitivity (ISO), or no role (NONE) DIAL to the rear command dial. 1 Aperture set to A (auto) and lens equipped with aperture ring or COMMAND selected for D BUTTON/DIAL SETTING > APERTURE RING SETTING (A). 2 Exposure compensation dial rotated to C. The Setup Menus N • COMMAND DIAL SETTING can also be accessed by pressing and holding the center of the front command dial. • You can also press the center of the front command dial to cycle through settings in the order FRONT COMMAND DIAL 1, FRONT COMMAND DIAL 2, and FRONT COMMAND DIAL 3. 8 228 BUTTON/DIAL SETTING SHUTTER AF Choose whether the camera focuses when the shutter button is pressed halfway. Option Description AF-S • ON: Focus locks when the shutter button is pressed halfway. • OFF: No focus operation is performed when the shutter button is pressed halfway. • ON: The camera focuses while the shutter button is pressed halfAF-C way. • OFF: No focus operation is performed when the shutter button is pressed halfway. SHUTTER AE If ON is selected, exposure will lock while the shutter button is pressed halfway. The setting for focus mode C (AF-C) can be adjusted separately from that for modes S (AF-S) and M (manual focus). OFF N Select OFF to allow the camera to adjust exposure before each shot taken in burst mode. The Setup Menus Options ON 8 229 SHOOT WITHOUT LENS Choose ON to enable the shutter release when no lens is attached. Options ON OFF SHOOT WITHOUT CARD Choose whether the shutter can be released without a memory card inserted in the camera. Option Description When no memory card is inserted, the shutter can be released to test camera function and the shooting and setup menus can be displayed. The shutter is disabled if no memory card is inserted, preventing accidental loss of pictures taken without a memory card. ON OFF The Setup Menus 8 FOCUS RING Choose the direction in which the focus ring is rotated to increase the focus distance. Options X CW (clockwise) Y CCW (counterclockwise) FOCUS RING OPERATION Choose how the camera adjusts focus in response to the movement of the focus ring. Option NONLINEAR LINEAR 230 Description Focus is adjusted at the same rate as the ring is rotated. Focus is adjusted linearly according to the amount the ring is rotated, but the focusing speed is unaffected by the speed the ring is rotated. BUTTON/DIAL SETTING AE/AF-LOCK MODE This option determines the behavior of the button to which exposure and/or focus lock is assigned. Option Description AE&AF ON WHEN Exposure and/or focus will lock while the button is pressed. PRESSING AE&AF ON/OFF Exposure and/or focus will lock when the button is pressed and remain locked until it is pressed again. SWITCH AWB-LOCK MODE Choose the behavior of function buttons assigned auto white balance (AWB) lock. Auto white balance lock is used to lock white balance at the value metered by the camera when WA WHITE PRIORITY, AUTO, or AA AMBIENCE PRIORITY is selected for white balance. APERTURE RING SETTING (A) Choose whether the front command dial can be used to adjust aperture when aperture is set to A (auto). Option AUTO COMMAND Description The camera adjusts aperture automatically. Aperture can be adjusted using the front command dial. 231 The Setup Menus Option Description AWB ON WHEN Auto white balance locks while the button is pressed. PRESSING AWB ON/OFF Press the button once to lock auto white balance and again to end the lock. SWITCH 8 APERTURE SETTING Choose the method used to adjust aperture when using lenses with no aperture rings. Option AUTO + o MANUAL AUTO MANUAL Description Rotate the front command dial to choose the aperture. Rotate past minimum aperture to choose A (auto). Aperture is selected automatically; camera functions in exposure mode P (program AE) or S (shutter-priority AE). Rotate the front command dial to choose the aperture; camera functions in exposure mode A (aperture-priority AE) or M (manual). TOUCH SCREEN SETTING Enable or disable touch-screen controls. x TOUCH SCREEN SETTING The Setup Menus Option ON OFF Description The LCD monitor functions as a touch screen during shooting. Touch controls disabled. x DOUBLE TAP SETTING Option 8 ON OFF Description Tap the LCD monitor twice to zoom in on your subject during shooting. Touch zoom disabled. c TOUCH FUNCTION Option ON OFF 232 Description Enable touch-function gestures. Disable touch-function gestures. BUTTON/DIAL SETTING a TOUCH SCREEN SETTING Option ON OFF Description The LCD monitor functions as a touch screen during playback. Touch controls disabled. EVF TOUCH SCREEN AREA SETTINGS Select the area of the LCD monitor used for touch controls while the viewfinder is active. The area used for touch controls can be selected from: Description All. Right half. Top right quarter. Bottom right quarter. Left half. Top left quarter. Bottom left quarter. Touch controls disabled. The Setup Menus Option 6 0 2 4 1 3 5 OFF 8 233 POWER MANAGEMENT Adjust power management settings. To access power management settings, press MENU/OK, select the D (SET UP) tab, and choose POWER MANAGEMENT. POWER MANAGEMENT AUTO POWER OFF PERFORMANCE BOOST SETTING EXIT AUTO POWER OFF Choose the length of time before the camera turns off automatically when no operations are performed. Shorter times increase battery life; if OFF is selected, the camera must be turned off manually. Options 5 MIN The Setup Menus 8 234 2 MIN 1 MIN 30 SEC 15 SEC OFF POWER MANAGEMENT PERFORMANCE Select BOOST to improve focus and EVF display performance. Option BOOST NORMAL Description Boost camera focus and EVF display performance. The battery drains faster than when is NORMAL selected. Choose for standard focus and EVF display performance and battery endurance. BOOST SETTING Adjust the behavior of the EVF and LCD monitor when BOOST is selected for PERFORMANCE. Option Description Display brightness is adjusted to make subjects in shadows LOW LIGHT PRIORITY easier to see. Motion blur may cause ghosting. RESOLUTION PRIORITY Display resolution is increased to make details easier to see. FRAME RATE PRIORITY The refresh rate for the EVF is increased, smoothing motion. The Setup Menus 8 235 SAVE DATA SETTING Make changes to file management settings. To access file management settings, press MENU/OK, select the D (SET UP) tab, and choose SAVE DATA SET-UP. SAVE DATA SETTING FRAME NO. SAVE ORG IMAGE EDIT FILE NAME SELECT FOLDER COPYRIGHT INFO EXIT FRAME NO. Frame number New pictures are stored in image files named using a four-digit file number assigned by adding one to the last file number used. The File file number is displayed during playback as Directory number number shown. FRAME NO. controls whether file numbering is reset to 0001 when a new memory card is inserted or the current memory card is formatted. The Setup Menus 8 Option CONTINUOUS RENEW Description Numbering continues from the last file number used or the first available file number, whichever is higher. Choose this option to reduce the number of pictures with duplicate file names. Numbering is reset to 0001 after formatting or when a new memory card is inserted. N • If the frame number reaches 999-9999, the shutter release will be disabled. Turn the camera off and insert a formatted memory card before resuming shooting. • Selecting D USER SETTING > RESET does not reset the file number. • Frame numbers for pictures taken with other cameras may differ. 236 SAVE DATA SETTING SAVE ORG IMAGE Choose ON to save unprocessed copies of pictures taken using RED EYE REMOVAL. Options ON OFF EDIT FILE NAME Change the file name prefix. sRGB images use a four-letter prefix (default “DSCF”), Adobe RGB images a three-letter prefix (“DSF”) preceded by an underscore. Option sRGB AdobeRGB Default prefix DSCF _DSF Sample file name ABCD0001 _ABC0001 The Setup Menus 8 237 SAVE DATA SETTING SELECT FOLDER Create folders and choose the folder used to store subsequent pictures. Option SELECT FOLDER CREATE FOLDER Description To choose the folder in which subsequent pictures will be stored, press the focus stick (focus lever) up or down to highlight an existing folder and press MENU/OK. Enter a five-character folder name. The new folder will be created with the next picture you take and subsequent pictures will be stored in that folder. COPYRIGHT INFO Copyright information, in the form of Exif tags, can be added to new images as they are taken. Changes to copyright information are reflected only in images taken after the changes are made. The Setup Menus Option Description DISP COPYRIGHT INFO View the current copyright information. ENTER AUTHOR’S INFO Enter the creator’s name. ENTER COPYRIGHT INFO Enter the name of the copyright holder. Delete the current copyright information. This change applies DELETE COPYRIGHT INFO only to images taken after this option is selected; copyright information recorded with existing images is not affected. 8 238 CONNECTION SETTING Adjust settings for connection to other devices. To access connection settings, press MENU/OK, select the D (SET UP) tab, and choose CONNECTION SETTING. CONNECTION SETTING Bluetooth SETTINGS PC AUTO SAVE PRINTER CONNECTION SETTING CONNECTION MODE USB POWER SUPPLY SETTING GENERAL SETTINGS INFORMATION RESET WIRELESS SETTING EXIT N For more information on wireless connections, visit: http://fujifilm-dsc.com/wifi/ Bluetooth SETTINGS Adjust Bluetooth settings. Option PAIRING REGISTRATION 239 The Setup Menus Description Pair the camera with a smartphone running the FUJIFILM Camera Remote app. Choose a connection from a list of devices with which the SELECT PAIRING camera has been paired using PAIRING REGISTRATION. DESTINATION Select NO CONNECTION to exit without connecting. Delete pairing information for selected devices. Choose the deDELETE PAIRING vice in the device list. The selected device will also be removed REG. from the devices listed in SELECT PAIRING DESTINATION. • ON: The camera automatically establishes a Bluetooth conBluetooth ON/OFF nection with paired devices when turned on. • OFF: The camera does not connect via Bluetooth. • ON: Mark photos for upload as they are taken. Mark JPEG AUTO IMAGE photos for upload as they are taken. TRANSFER • OFF: Photos are not marked for upload as they are taken. Choose whether to synchronize the camera to the time and/or location provided by a paired smartphone. SMARTPHONE • LOCATION&TIME: Synchronize the time and location. SYNC. SETTING • LOCATION: Synchronize the location. • TIME: Synchronize the time. • OFF: Synchronization off. 8 N • Install the latest version of the FUJIFILM Camera Remote app on your smartphone or tablet before pairing the device with your camera or uploading images. • When ON is selected for both Bluetooth ON/OFF and AUTO IMAGE TRANSFER or images are currently selected for upload using the IMAGE TRANSFER ORDER option in the C (playback) menu, upload to paired devices will begin shortly after you exit to playback or turn the camera off. IMAGE TRANSFER ORDER can also be used to select pictures for upload when AUTO IMAGE TRANSFER is off. PC AUTO SAVE Adjust settings for connection to computers via wireless LAN. Option PC AUTO SAVE SETTING The Setup Menus 8 Description Choose the method used for connection to computers via a wireless LAN. • SIMPLE SETUP: Connect using WPS. • MANUAL SETUP: Choose the network from a list (SELECT FROM NETWORK LIST) or enter the name manually (ENTER SSID). DELETE REGISTERED Remove selected destinations. DESTINATION PC DETAILS OF PREVIOUS View computers to which the camera has recently connected. CONNECTION N These settings also apply when pictures are downloaded to a computer using “FUJIFILM PC AutoSave” software. 240 CONNECTION SETTING instax PRINTER CONNECTION SETTING Adjust settings for connection to optional Fujifilm instax SHARE printers. The Printer Name (SSID) and Password The printer name (SSID) can be found on the bottom of the printer; the default password is “1111”. If you have already chosen a different password to print from a smartphone, enter that password instead. The Setup Menus 8 241 CONNECTION MODE Adjust settings for connection to external devices. Option The Setup Menus 8 Description Connecting the camera to a computer via USB automatically enables data transfer mode, allowing data to be copied to USB CARD READER the computer. The camera functions normally when not connected. The camera can be used as a webcam when connected to a X WEBCAM computer running FUJIFILM X Webcam. The camera’s movie-recording features can be controlled from gimbals, drones, or other devices connected via USB. The camera automatically enters “tethered shooting” (i.e., reUSB MOVIE mote-control) mode when the external device is turned on * SHOOTING AUTO and returns to normal operation when the external device turned off or disconnected. The features available vary with the type of device connected. As for USB MOVIE SHOOTING AUTO, except that the camera remains in “tethered shooting” (remote-control) USB MOVIE mode when the external device is off or not connected, alSHOOTING FIXED * lowing the device to resume control when the connection is re-established after an accidental disconnection or other disruption. Connecting the camera to a computer via USB automatically enables USB RAW conversion/backup restore mode. The camera functions normally when not connected. USB RAW CONV. (requires FUJIFILM X RAW STUDIO): Use the camUSB RAW CONV./ • era’s image processing engine to rapidly convert RAW files BACKUP RESTORE to high-quality JPEG images. • BACKUP RESTORE (requires FUJIFILM X Acquire): Save and load camera settings. Reconfigure the camera in an instant or share settings with other cameras of the same type. * Rotate the drive dial to F (movie). N For information on compatible computer software, see “Software for Use with Your Camera” (P 298). 242 CONNECTION SETTING USB POWER SUPPLY SETTING Choose whether power is supplied to the camera when it is connected to a computer or other device via a USB cable. Option ON OFF Description The camera draws power from the connected device, reducing the drain on the camera battery. The camera does not draw power from the connected device. O The camera cannot draw power from Lightning connections or from devices that do not supply power. Select OFF before connecting the camera to such devices. The connection may not be available for data transfer or the like when ON is selected. N Regardless of the option selected, the battery will charge while the camera is off. The Setup Menus 8 243 CONNECTION SETTING GENERAL SETTINGS Adjust settings for connection to wireless networks. Option Description Choose a name (NAME) to identify the camera on the wireless NAME network (the camera is assigned a unique name by default). Choose whether to resize images for upload to smartphones. RESIZE IMAGE FOR Resizing applies only to the copy uploaded to the smartphone; SMARTPHONE the original is not affected. H • ON: Larger images are resized to H for upload. • OFF: Images are uploaded at their original size. Choose whether location data downloaded from a smartphone GEOTAGGING are embedded in pictures as they are taken. LOCATION INFO Display the location data last downloaded from a smartphone. The Setup Menus 8 r BUTTON SETTING Choose the role played by the Fn1 button during playback. • s PAIRING/TRANSFER ORDER: The Fn1 button can be used for pairing and selecting images for transfer during playback. • r WIRELESS COMMUNICATION: The Fn1 button can be used during playback to establish wireless connections. INFORMATION View the camera’s MAC and Bluetooth address. RESET WIRELESS SETTING Restore wireless settings to their default values. 244 Shortcuts 245 Shortcut Options Customize camera controls to suit your style or situation. Frequently-used options can be added to the Q menu or a custom “my” menu or assigned to a function button or touch-function gesture for direct access: Shortcut Option Description Add frequently-used options to this custom menu, “My menu” which can be viewed by pressing MENU/OK and selecting the E (“MY MENU”) tab. The Q menu is displayed by pressing the Q button. The Quick Menu Use the Q menu to view or change the options selected for frequently-used menu items. Use the function buttons for direct access to selectThe function button ed features. Use touch function button flick gestures (T-Fn1, Touch-function T-Fn2, T-Fn3, and T-Fn4) for direct access to selected gestures features. Shortcuts 9 246 P 247 249 255 258 MY MENU Access a personalized menu of frequently-used options. To display “my menu”, press MENU/OK in the shooting display and select the E (MY MENU) tab. MY MENU SELF-TIMER INTERVAL TIMER SHOOTING FILM SIMULATION GRAIN EFFECT PHOTOMETRY SHUTTER TYPE IS MODE FACE/EYE DETECTION SETTING EXIT O The E tab is only available if options have been assigned to E MY MENU. MY MENU SETTING To choose the items listed in the E (MY MENU) tab: 1 In the setup menu, select D USER SETTING > x MY MENU SETTING or F MY MENU SETTING. MY MENU SETTING ADD ITEMS RANK ITEMS REMOVE ITEMS N To reorder items, select RANK ITEMS. To delete items, select REMOVE ITEMS. 2 MY MENU SETTING IMAGE SIZE IMAGE QUALITY RAW RECORDING FILM SIMULATION MONOCHROMATIC COLOR GRAIN EFFECT COLOR CHROME EFFECT COLOR CHROME FX BLUE SELECT Shortcuts Press the focus stick (focus lever) up or down to highlight ADD ITEMS and press MENU/OK. Options that can be added to “my menu” are highlighted in blue. CANCEL N Items currently in “my menu” are indicated by check marks. 247 9 MY MENU 3 Choose a position for the item and press MENU/OK. The item will be added to “my menu”. SELECT ITEM LOCATION 1 IMAGE SIZE 2 IMAGE QUALITY MOVE 4 5 SAVE Press MENU/OK to return to the edit display. Repeat Steps 3 and 4 until all the desired items have been added. N “My menu” can contain up to 16 items. Shortcuts 9 248 The Quick Menu Use the quick menu for quick access to selected options. To view the quick menu, press the Q button. The Quick Menu Display The quick menu offers different options in photo and movie modes. At default settings, it contains the following items: Still photography ISO SET LONG PRESS EDIT/SAVE CUSTOM G IMAGE QUALITY H FILM SIMULATION I SELF-TIMER J FACE/EYE DETECTION SETTING K FLASH FUNCTION SETTING L EVF/LCD BRIGHTNESS The quick menu shows the options currently selected for items B–L, which can be changed. 249 Shortcuts Default SHOOTING MODE/ A SELECT CUSTOM SETTING B ISO C WHITE BALANCE D DYNAMIC RANGE E HIGH ISO NR F IMAGE SIZE 9 Movie recording S.S. SET A SHOOTING MODE B S.S. (MOVIE OPTIMIZED CONTROL oL) C MOVIE MODE RESOLUTION/ ASPECT RATIO D F WHITE BALANCE END Default E APERTURE (MOVIE OPTIMIZED CONTROL oL) F F ISO G MOVIE MODE FRAME RATE H WHITE BALANCE COLOR TEMP. (WHEN k SELECTED) Shortcuts The quick menu shows the options currently selected for items B–H, which can be changed. 9 250 The Quick Menu Viewing and Changing Settings 1 Press Q to display the quick menu during shooting. 2 Use the focus stick (focus lever) to highlight items and rotate the rear command dial to change. ISO SET LONG PRESS EDIT/SAVE CUSTOM N To jump to the EDIT/SAVE CUSTOM SETTING menu, press and hold the Q button when the quick menu is displayed. Press Q to exit when settings are complete. N • The quick menu can also be edited using touch controls. • Using D BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING, you can assign the Q button roles normally reserved for the function buttons or assign the Q button’s default role to a function button (P 255). • To disable the Q (quick menu) button, select NONE for D BUTTON/ DIAL SETTING > FUNCTION (Fn) SETTING > Q BUTTON SETTING. 251 Shortcuts 3 9 Editing the Quick Menu To choose the items displayed in the quick menu: 1 Press and hold the Q button during shooting. N The camera displays the photo quick menu during still photography and the movie quick menu when in movie mode. 2 The current quick menu will be displayed; use the focus stick (focus lever) to highlight the item you wish to change and press MENU/OK. 3 Highlight the item you wish to change and press MENU/OK. The following can be assigned to the quick menu. N The quick menus can also be edited using D BUTTON/DIAL SETTING > x EDIT/SAVE QUICK MENU or F EDIT/SAVE QUICK MENU. Shortcuts 9 252 The Quick Menu Available Items (Still Photography) Choose from: • IMAGE SIZE • IMAGE QUALITY • FILM SIMULATION • GRAIN EFFECT • COLOR CHROME EFFECT • COLOR CHROME FX BLUE • DYNAMIC RANGE • D RANGE PRIORITY • WHITE BALANCE • WHITE BALANCE COLOR TEMP. • TOUCH SCREEN MODE • HDR • SELF-TIMER • PHOTOMETRY • SHUTTER TYPE • FLICKER REDUCTION • ISO • FLASH FUNCTION SETTING • FLASH COMPENSATION • MOVIE MODE RESOLUTION/ • HIGHLIGHT TONE • SHADOW TONE • COLOR • SHARPNESS • CLARITY • HIGH ISO NR • AF MODE • AF-C CUSTOM SETTINGS • FACE/EYE DETECTION SETTING • MF ASSIST • MOVIE MODE FRAME RATE • MOVIE MODE BIT RATE • FULL HD HIGH SPEED REC • INTERNAL/EXTERNAL MIC LEVEL (WHEN k SELECTED) ASPECT RATIO ADJUSTMENT • SOUND & FLASH • EVF/LCD BRIGHTNESS • EVF/LCD COLOR • NONE Shortcuts N To disable the function button, choose NONE. 9 253 The Quick Menu Available Items (Movies) • FILM SIMULATION • DYNAMIC RANGE • WHITE BALANCE • WHITE BALANCE COLOR TEMP. (WHEN k SELECTED) • HIGHLIGHT TONE • SHADOW TONE • COLOR • SHARPNESS • HIGH ISO NR • FACE/EYE DETECTION SETTING • MF ASSIST • TOUCH SCREEN MODE • PHOTOMETRY • MOVIE ISO • MOVIE MODE RESOLUTION/ • MOVIE MODE FRAME RATE • MOVIE MODE BIT RATE • FULL HD HIGH SPEED REC • MOVIE AF MODE • FIX MOVIE CROP MAGNIFICATION • S.S. (MOVIE OPTIMIZED CONTROL oL) • APERTURE (MOVIE OPTIMIZED CONTROL oL) • INTERNAL/EXTERNAL MIC LEVEL ADJUSTMENT • SOUND & FLASH • EVF/LCD BRIGHTNESS • EVF/LCD COLOR • NONE ASPECT RATIO N To disable the function button, choose NONE. Shortcuts 9 254 Function Controls Assign a role to each function button or touch-function gesture for quick access to the selected feature. The Function Buttons Assign a role to the function buttons for quick access to the selected feature. Function Button Defaults The default assignments are: AE-L button PERFORMANCE AE LOCK ONLY AF-L button Center of rear command dial AF LOCK ONLY FOCUS CHECK Q button VIEW MODE button QUICK MENU VIEW MODE SETTING Shortcuts Fn1 button 9 255 Assigning Roles to the Function Buttons The roles played by the function buttons can be selected using the D BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING option in the setup menu. Shortcuts 9 • IMAGE SIZE • IMAGE QUALITY • RAW • FILM SIMULATION • GRAIN EFFECT • COLOR CHROME EFFECT • COLOR CHROME FX BLUE • DYNAMIC RANGE • D RANGE PRIORITY • WHITE BALANCE • CLARITY • SELECT CUSTOM SETTING • FOCUS AREA • FOCUS CHECK • AF MODE • AF-C CUSTOM SETTINGS • FACE DETECTION ON/OFF • AF RANGE LIMITER • FOCUS CHECK LOCK • DRIVE SETTING • HDR • SPORTS FINDER MODE • PRE-SHOT sJ • SELF-TIMER • PHOTOMETRY • SHUTTER TYPE • FLICKER REDUCTION • ISO • IS MODE • WIRELESS COMMUNICATION • FLASH COMPENSATION • FLASH FUNCTION SETTING • TTL-LOCK • MODELING FLASH • MOVIE RECORDING RELEASE • FULL HD HIGH SPEED REC • FIX MOVIE CROP MAGNIFICATION • ZEBRA SETTING • INTERNAL/EXTERNAL MIC LEVEL ADJUSTMENT • MOVIE OPTIMIZED CONTROL oL • VIEW MODE SETTING • PREVIEW DEPTH OF FIELD • PREVIEW EXP./WB IN MANUAL MODE • NATURAL LIVE VIEW • HISTOGRAM • ELECTRONIC LEVEL • LARGE INDICATORS MODE • F-Log VIEW ASSIST • AE LOCK ONLY • AF LOCK ONLY • AE/AF LOCK • AF-ON • AWB LOCK ONLY • APERTURE SETTING • PERFORMANCE • AUTO IMAGE TRANSFER • SELECT PAIRING DESTINATION • Bluetooth ON/OFF • QUICK MENU • PLAYBACK • NONE N To disable the function button, choose NONE. 256 Function Controls AF-ON Controls to which AF-ON is assigned can be used for autofocus. MODELING FLASH If MODELING FLASH is selected when a compatible shoe-mounted flash unit is attached, you can press the control to test-fire the flash and check for shadows and the like (modeling flash). TTL-LOCK If TTL-LOCK is selected, you can press the control to lock flash output according to the option selected for F FLASH SETTING > TTL-LOCK MODE (P 153). Shortcuts 9 257 Touch-Function Gestures Assign roles to touch-function gestures (T-Fn1, T-Fn2, T-Fn3, or T-Fn4) for quick access to selected features. N Touch-function gestures are disabled by default. To enable touch-function gestures, select ON for D BUTTON/DIAL SETTING > TOUCH SCREEN SETTING > c TOUCH FUNCTION. Touch-Function Gesture Defaults The default assignments for the different gestures are: Shortcuts 9 258 T-Fn1 (flick up) T-Fn2 (flick left) DRIVE SETTING FILM SIMULATION T-Fn3 (flick right) T-Fn4 (flick down) WHITE BALANCE AF MODE Function Controls Assigning Roles to Touch-Function Gestures The roles played by touch-function gestures can be selected using the D BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING option in the setup menu. • IS MODE • WIRELESS COMMUNICATION • FLASH COMPENSATION • FLASH FUNCTION SETTING • TTL-LOCK • MODELING FLASH • FULL HD HIGH SPEED REC • FIX MOVIE CROP MAGNIFICATION • ZEBRA SETTING • INTERNAL/EXTERNAL MIC LEVEL ADJUSTMENT • MOVIE OPTIMIZED CONTROL oL • VIEW MODE SETTING • PREVIEW DEPTH OF FIELD • PREVIEW EXP./WB IN MANUAL MODE • NATURAL LIVE VIEW • HISTOGRAM • ELECTRONIC LEVEL • LARGE INDICATORS MODE • F-Log VIEW ASSIST • APERTURE SETTING • PERFORMANCE • AUTO IMAGE TRANSFER • SELECT PAIRING DESTINATION • Bluetooth ON/OFF • QUICK MENU • PLAYBACK • NONE N To disable touch-function gestures, choose NONE. 259 Shortcuts • IMAGE SIZE • IMAGE QUALITY • RAW • FILM SIMULATION • GRAIN EFFECT • COLOR CHROME EFFECT • COLOR CHROME FX BLUE • DYNAMIC RANGE • D RANGE PRIORITY • WHITE BALANCE • CLARITY • SELECT CUSTOM SETTING • FOCUS AREA • FOCUS CHECK • AF MODE • AF-C CUSTOM SETTINGS • FACE DETECTION ON/OFF • AF RANGE LIMITER • FOCUS CHECK LOCK • DRIVE SETTING • HDR • SPORTS FINDER MODE • PRE-SHOT sJ • SELF-TIMER • PHOTOMETRY • SHUTTER TYPE • FLICKER REDUCTION • ISO 9 MEMO 260 Peripherals and Optional Accessories 261 Lenses The camera can be used with lenses for the FUJIFILM X-mount. Lens Parts Peripherals and Optional Accessories A Lens hood B Mounting marks C Focus ring D Zoom ring E Aperture ring F O.I.S. switch G Aperture mode switch H Lens signal contacts I Front lens cap J Rear lens cap N A XF18-55mmF2.8-4 R LM OIS lens is used here for illustrative purposes. 10 262 Lenses Removing Lens Caps Remove lens caps as shown. O Lens caps may differ from those shown. Peripherals and Optional Accessories Attaching Lens Hoods When attached, lens hoods reduce glare and protect the front lens element. 10 263 Lenses with Aperture Rings At settings other than A, you can adjust aperture by rotating the lens aperture ring (exposure modes A and M). A 16 11 8 5.6 4 2.8 A 16 11 8 5.6 4 Aperture ring N • Selecting ON for MOVIE OPTIMIZED CONTROL oL disables the aperture ring. • When the aperture ring is set to A, rotate the command dials to adjust aperture. Peripherals and Optional Accessories The Aperture Mode Switch If the lens has an aperture mode switch, aperture can be adjusted manually by sliding the switch to Z and rotating the aperture ring. Aperture ring Aperture mode switch 10 264 Lenses Lenses with No Aperture Rings The method used to adjust aperture can be selected using D BUTTON/DIAL SETTING > APERTURE SETTING. When an option other than AUTO is selected, aperture can be adjusted using the front command dial. N Aperture control defaults to the front command dial, but can be reas- signed to the rear command dial using D BUTTON/DIAL SETTING > COMMAND DIAL SETTING. O.I.S. switch Peripherals and Optional Accessories Lenses with O.I.S. Switches If the lens supports optical image stabilization (O.I.S.), the image stabilization mode can be chosen in the camera menus. To activate image stabilization, slide the O.I.S. switch to ON. 10 265 Manual Focus Lenses Slide the focus ring to the front for autofocus. For manual focus, slide the focus ring to the back and rotate it while checking the results in the camera display. The focus distance and depth-of-field indicators can be used to assist manual focus. O Note that manual focus may not be available in all shooting modes. Peripherals and Optional Accessories The Depth-of-Field Indicator The depth-of-field indicator shows the approximate depth of field (the distance in front of and behind the focus point that appears to be in focus). The indicator is displayed in film format. 10 266 Lenses Lens Care • Use a blower to remove dust, then gently wipe with a soft, dry cloth. Any remaining stains can be removed by wiping gently with a piece of Fujifilm lens-cleaning paper to which a small amount of lens-cleaning fluid has been applied. • Replace the front and rear caps when the lens is not in use. Peripherals and Optional Accessories 10 267 External Flash Units Use optional external flash units for flash photography. Some units support high-speed sync (FP) and can be used at shutter speeds faster than the flash sync speed, while others can function as commanders controlling remote units via optical wireless flash control. O You may be unable to test-fire the flash in some circumstances, for example when camera menus are displayed. Red-Eye Removal Red-eye removal is available when an option other than OFF is selected for F FLASH SETTING > RED EYE REMOVAL and G AF/MF SETTING > FACE/EYE DETECTION SETTING is FACE DETECTION ON. Red-eye removal minimizes “red-eye” caused when light from the flash is reflected from the subject’s retinas. Peripherals and Optional Accessories Flash Sync Speed The flash will synchronize with the shutter at shutter speeds of 1⁄180 s or slower. Optional Flash Units from Fujifilm The camera can be used with optional Fujifilm shoe-mounted flash units. Third-Party Flash Units Do not use third-party flash units that apply over 300 V to the camera hot shoe. 10 268 External Flash Units Using an External Flash 1 2 Connect the unit to the camera. In shooting mode, select FLASH FUNCTION SETTING in the F (FLASH SETTING) menu tab. The options available vary with the flash unit. FLASH SETTING FLASH FUNCTION SETTING RED EYE REMOVAL TTL-LOCK MODE LED LIGHT SETTING COMMANDER SETTING CH SETTING EXIT 3 Highlight items using the focus stick (focus lever) and rotate the rear command dial to change the highlighted setting. 270 271 274 MODE Built-In Flash ADJUST 4 P 98 END Press DISP/BACK to put the changes into effect. Peripherals and Optional Accessories Menu Description Built-In Flash Displayed when the built-in flash is raised. Sync terminal options will be displayed if the built-in flash SYNC is lowered and either no flash unit, or an incompatible TERMINAL flash unit, is mounted on the hot shoe. SHOE MOUNT Displayed when an optional flash unit other than the FLASH EF-X8 is mounted on the hot shoe and turned on. Displayed if an optional flash unit functioning as a comCOMMANDER mander for Fujifilm optical wireless remote flash control is (OPTICAL) connected and turned on. 10 269 SYNC TERMINAL SYNC TERMINAL is displayed if the built-in flash is lowered and either no flash unit, or an incompatible flash unit, is mounted on the hot shoe. MODE SYNC TERMINAL ADJUST Setting END Peripherals and Optional Accessories Description Choose from the following options: • M: A trigger signal is transmitted via the hot shoe X contacts when a picture is taken. Choose a shutter speed slower than A Flash control mode the sync speed; even slower speeds may be required if the unit uses long flashes or has a slow response time. • D (OFF): The trigger signal is disabled. Choose whether the flash is timed to fire immediately after the shutter opens (H/1ST CURTAIN) or immediately before B Sync it closes (I/2ND CURTAIN). 1ST CURTAIN is recommended in most circumstances. 10 270 External Flash Units SHOE MOUNT FLASH The following options are available when an optional shoe-mounted flash unit is attached and turned on. MODE SHOE MOUNT FLASH ADJUST END Setting Peripherals and Optional Accessories Description The flash control mode selected with the flash unit. This can in some cases be adjusted from the camera; the options available vary with the flash. • TTL: TTL mode. Adjust flash compensation (B). • M: The flash fires at the selected output regardless of subject A Flash control mode brightness or camera settings. Output in some cases can be adjusted from the camera (B). • MULTI: Repeating flash. Compatible shoe-mounted flash units will fire multiple times with each shot. • D (OFF): The flash does not fire. Some flash units can be turned off from the camera. 10 271 Setting Peripherals and Optional Accessories Description The options available vary with flash control mode. • TTL: Adjust flash compensation (the full value may not be applied if the limits of the flash control system are exceeded). In the cases of the EF-X20, EF-20, and EF-42, the selected value is added to the value selected with the flash unit. B Flash compensation/ • M/MULTI: Adjust flash output (compatible units only). output Choose from values expressed as fractions of full power, from ⁄ (mode M) or ¼ (MULTI) down to ⁄ in increments equivalent to ⁄ EV. The desired results may not be achieved at low values if they exceed the limits of the flash control system; take a test shot and check the results. Choose a flash mode for TTL flash control. The options available vary with the shooting mode (P, S, A, or M) selected. • E (FLASH AUTO): The flash fires only as required; flash level is adjusted according to subject brightness. A p icon displayed when the shutter button is pressed halfway indicates that the flash will fire when the photo is taken. F (STANDARD): The flash fires with every shot if possible; • C Flash mode (TTL) flash level is adjusted according to subject brightness. The flash will not fire if not fully charged when the shutter is released. • G (SLOW SYNC.): Combine the flash with slow shutter speeds when photographing portrait subjects against a backdrop of night scenery. The flash will not fire if not fully charged when the shutter is released. 10 272 External Flash Units Setting D Sync E Zoom G LED light G Number of flashes * H Frequency * Peripherals and Optional Accessories F Lighting Description Control flash timing. • H (1ST CURTAIN): The flash fires immediately after the shutter opens (generally the best choice). • I (2ND CURTAIN): The flash fires immediately before the shutter closes. • R (AUTO FP(HSS)): High-speed sync (compatible units only). The camera automatically engages front-curtain highspeed sync at shutter speeds faster than the flash sync speed. Equivalent to 1ST CURTAIN when MULTI is selected for flash control mode. The angle of illumination (flash coverage) for units that support flash zoom. Some units allow the adjustment to be made from the camera. If AUTO is selected, zoom will automatically be adjusted to match coverage to lens focal length. If the unit supports this feature, choose from: • J (FLASH POWER PRIORITY): Gain range by slightly reducing coverage. • K (STANDARD): Match coverage to picture angle. • L (EVEN COVERAGE PRIORITY): Slightly increase coverage for more even lighting. Choose how the built-in LED light functions during still photography (compatible units only): as a catchlight (M/CATCHLIGHT), as an AF-assist illuminator (N/AF ASSIST), or as both a catchlight and an AF-assist illuminator (O/AF ASSIST+CATCHLIGHT). Choose OFF to disable the LED during photography. Choose the number of times the flash fires each time the shutter is released in MULTI mode. Choose the frequency at which the flash fires in MULTI mode. * Full value may not be applied if limits of flash control system are exceeded. 10 273 COMMANDER(OPTICAL) The options will be displayed if the unit is currently functioning as a commander for Fujifilm optical wireless remote flash control. MODE COMMANDER(OPTICAL) ADJUST END Peripherals and Optional Accessories Fujifilm optical wireless remote flash control offers a choice of four channels (Channels 1 through 4) for the exchange of optical signals between the commander and remote flash units. Separate channels can be used for different flash systems or to prevent interference when multiple systems are operating in close proximity. The flash units can also be placed in up to three groups (A, B, and C) and flash mode C and flash level adjusted separately for A each group. B 10 274 External Flash Units Setting A Flash control mode (group A) B Flash control mode (group B) C Flash control mode (group C) output (group A) E Flash compensation/ output (group B) F Flash compensation/ output (group C) Peripherals and Optional Accessories D Flash compensation/ Description Choose flash control modes for groups A, B, and C. TTL% is available for groups A and B only. • TTL: The units in the group fire in TTL mode. Flash compensation can be adjusted separately for each group. • TTL%: If TTL% is selected for either group A or B, you can specify the output of the selected group as a percentage of the other and adjust overall flash compensation for both groups. • M: In mode M, the units in the group fire at the selected output (expressed as a fraction of full power) regardless of subject brightness or camera settings. • MULTI: Choosing MULTI for any group sets all the units in all groups to repeating flash mode. All units will fire multiple times with each shot. • D (OFF): If OFF is selected, the units in the group will not fire. Adjust flash level for the selected group according to option selected for flash control mode. Note that the full value may not be applied if the limits of the flash control system are exceeded. • TTL: Adjust flash compensation. • M/MULTI: Adjust flash output. • TTL%: Choose the balance between groups A and B and adjust overall flash compensation. 10 275 Setting G Flash mode (TTL) Peripherals and Optional Accessories H Sync I Zoom 10 J Lighting 276 Description Choose a flash mode for TTL flash control. The options available vary with the shooting mode (P, S, A, or M) selected. • E (FLASH AUTO): The flash fires only as required; flash level is adjusted according to subject brightness. A p icon displayed when the shutter button is pressed halfway indicates that the flash will fire when the photo is taken. • F (STANDARD): The flash fires with every shot if possible; flash level is adjusted according to subject brightness. The flash will not fire if not fully charged when the shutter is released. • G (SLOW SYNC.): Combine the flash with slow shutter speeds when photographing portrait subjects against a backdrop of night scenery. The flash will not fire if not fully charged when the shutter is released. Control flash timing. • H (1ST CURTAIN): The flash fires immediately after the shutter opens (generally the best choice). • I (2ND CURTAIN): The flash fires immediately before the shutter closes. • R (AUTO FP(HSS)): High-speed sync (compatible units only). The camera automatically engages front-curtain highspeed sync at shutter speeds faster than the flash sync speed. Equivalent to 1ST CURTAIN when MULTI is selected for flash control mode. The angle of illumination (flash coverage) for units that support flash zoom. Some units allow the adjustment to be made from the camera. If AUTO is selected, zoom will automatically be adjusted to match coverage to lens focal length. If the unit supports this feature, choose from: • J (FLASH POWER PRIORITY): Gain range by slightly reducing coverage. • K (STANDARD): Match coverage to picture angle. • L (EVEN COVERAGE PRIORITY): Slightly increase coverage for more even lighting. External Flash Units Setting K Commander K Number of flashes L Channel Peripherals and Optional Accessories L Frequency Description Choose the group for units functioning as a commander for Fujifilm optical wireless remote flash control in TTL, TTL%, or M mode. This option is available only with clipon flash units that support Fujifilm optical wireless remote flash control. • Gr A: Assign the commander to group A. • Gr B: Assign the commander to group B. • Gr C: Assign the commander to group C. • OFF: Output from the commander is held to a level that does not affect the final picture. Choose the number of times the flash fires each time the shutter is released in MULTI mode. Choose the channel used by the commander for communication with the remote flash units. Separate channels can be used for different flash systems or to prevent interference when multiple systems are operating in close proximity. Choose the frequency at which the flash fires in MULTI mode. 10 277 MEMO 278 Connections 279 HDMI Output Camera shooting and playback displays can be output to HDMI devices. Connecting to HDMI Devices Connect the camera to TVs or other HDMI devices using a third-party HDMI cable. 1 2 Turn the camera off. Connect the cable as shown below. Insert into HDMI connector Insert into HDMI Micro connector (Type D) Connections 11 3 Configure the device for HDMI input as described in the documentation supplied with the device. 4 Turn the camera on. The contents of the camera display will be shown on the HDMI device. The camera display turns off in playback mode (P 281). O • Making sure the connectors are fully inserted. • Use an HDMI cable no more than 1.5 m (4.9 ft.) long. • The USB cable cannot be used while an HDMI cable is connected. 280 HDMI Output Shooting Shoot photos and record movies while viewing the scene through the camera lens on or saving footage to the HDMI device. N This feature can be used to save 4K and Full HD movies to an HDMI recorder. Playback To start playback, press the camera a button. The camera monitor turns off and pictures and movies are output to the HDMI device. Note that the camera volume controls have no effect on sounds played on the TV; use the television volume controls to adjust the volume. N • Some televisions may briefly display a black screen when movie playback begins. • An adapter cable (sold separately; P 331) is required when using headphones. Connections 11 281 Wireless Connections (Bluetooth®, Wireless LAN/Wi-Fi) Access wireless networks and connect to computers, smartphones, or tablets. For more information, visit: http://fujifilm-dsc.com/wifi/ Smartphones and Tablets: FUJIFILM Camera Remote Connect to the camera via Bluetooth or wireless LAN. N To establish a wireless connection to the camera, you will need to install the latest version of the FUJIFILM Camera Remote app on your smartphone or tablet. FUJIFILM Camera Remote Once a connection has been established, you can use FUJIFILM Camera Remote to: • Control the camera and take pictures remotely • Receive pictures uploaded from the camera • Browse the pictures on the camera and download selected pictures • Upload location data to the camera • Release the camera shutter • Update camera firmware For downloads and other information, visit: http://app.fujifilm-dsc.com/en/camera_remote/ Connections 11 282 Wireless Connections (Bluetooth®, Wireless LAN/Wi-Fi) SmartPhones and Tablets: Bluetooth® Pairing Use D CONNECTION SETTING > Bluetooth SETTINGS > PAIRING REGISTRATION to pair the camera with smartphones or tablets. Pairing offers a simple method for downloading photos from the camera. N • Photos are downloaded via a wireless connection. • Once pairing is complete, you will be able to synchronize the camera clock and location data with the smartphone or tablet (P 239). • You can choose a connection from up to 7 paired smartphones or tablets. Smartphones and Tablets: Wireless LAN Establish wireless LAN connections to smartphones or tablets using WIRELESS COMMUNICATION in the A SHOOTING SETTING, B MOVIE SETTING, or C PLAY BACK MENU. Connections 11 283 Wireless Connections (Bluetooth®, Wireless LAN/Wi-Fi) Copying Pictures to a Computer: PC AutoSave Install the latest version of FUJIFILM PC Autosave to your computer to upload pictures from the camera over wireless networks (Wi-Fi). FUJIFILM PC AutoSave For downloads and other information, visit: http://app.fujifilm-dsc.com/en/pc_autosave/ Computers: Wireless Connections You can upload pictures from the camera using the PC AUTO SAVE option in the playback menu. Connections 11 284 Connecting via USB The camera can be connected to computers and smartphones via USB. Connecting to Computers N Before downloading pictures or taking pictures remotely, connect the camera to a computer and check that it functions normally. 1 2 Turn the computer on. 3 4 Turn the camera off. Adjust settings according to how the camera will be used. • “Copying Pictures from a Memory Card to a Computer” (P 288) • “Using Your Camera as a Webcam (FUJIFILM X Webcam)” (P 288) • “Converting RAW Images (FUJIFILM X RAW STUDIO)” (P 289) • “Backing up and Restoring Camera Settings (FUJIFILM X Acquire)” (P 289) Connect a USB cable. Connections 11 USB connector (Type-C) O The USB cable must be no more than 1.5 m (4.9 ft.) long and be suitable for data transfer. 285 5 6 Turn the camera on. Copy pictures to your computer. • Image transfer: Use applications provided with your operating system. • Using your camera as a webcam: Launch FUJIFILM X Webcam. • RAW conversion: Process RAW images using FUJIFILM X RAW STUDIO. The power of the camera’s image processing engine is used for rapid processing. • Saving and loading camera settings: Use FUJIFILM X Acquire to save or load camera settings. Save your preferred settings to a file in a single operation and copy them to multiple cameras. Connections 11 286 Connecting via USB O • Turn the camera off before disconnecting the USB cable. • When connecting USB cables, be sure the connectors are fully inserted in the correct orientation. Connect the camera directly to the computer; do not use a USB hub or keyboard. • Loss of power during transfer could result in loss of data or damage to the memory card. Insert a fresh or fully-charged battery before connecting the camera. • If a memory card containing a large number of images is inserted, there may be a delay before the software starts and you may be unable to import or save images. Use a memory card reader to transfer pictures. • Make sure that the indicator lamp is off or lit green before disconnecting the camera. • Do not disconnect the USB cable while transfer is in progress. Failure to observe this precaution could result in loss of data or damage to the memory card. • Disconnect the camera before inserting or removing memory cards. • In some cases, it may not be possible to access pictures saved to a network server using the software in the same way as on a standalone computer. • Do not immediately remove the camera from the system or disconnect the USB cable once the message stating that copying is in progress clears from the computer display. If the number of images copied is very large, data transfer may continue after the message has ceased to be displayed. • The user bears all applicable fees charged by the phone company or Internet service provider when using services that require an Internet connection. Connections 11 287 Copying Pictures from a Memory Card to a Computer • Before copying pictures to a computer, seBluetooth SETTINGS PC AUTO SAVE lect USB CARD READER for D CONNECTION PRINTER CONNECTION SETTING CONNECTION MODE SETTING > CONNECTION MODE. USB POWER SUPPLY SETTING GENERAL SETTINGS • The software that can be used to copy INFORMATION RESET WIRELESS SETTING pictures varies with your computer operating system. CONNECTION SETTING USB CARD READER X WEBCAM USB MOVIE SHOOTING AUTO USB MOVIE SHOOTING FIXED USB RAW CONV./BACKUP RESTORE Mac OS X/macOS Pictures can be copied to your computer using Image Capture (supplied with your computer) or other software. O Use a card reader to copy files over 4 GB in size. Windows Pictures can be copied to your computer using applications supplied with the operating system. Using Your Camera as a Webcam (FUJIFILM X Webcam) • Before proceeding, select X WEBCAM for Bluetooth SETTINGS PC AUTO SAVE D CONNECTION SETTING > CONNECTION PRINTER CONNECTION SETTING CONNECTION MODE MODE in the camera menus. USB POWER SUPPLY SETTING GENERAL SETTINGS • Launch FUJIFILM X Webcam. INFORMATION CONNECTION SETTING USB CARD READER X WEBCAM USB MOVIE SHOOTING AUTO USB MOVIE SHOOTING FIXED USB RAW CONV./BACKUP RESTORE RESET WIRELESS SETTING N For more information on FUJIFILM X Webcam, see “Software for Use Connections with Your Camera” (P 298). 11 288 Connecting via USB Tethered Movie Recording • Before proceeding, select USB MOVIE SHOOTING AUTO for D CONNECTION SETTING > CONNECTION MODE in the camera menus. • Use this option when the camera is connected to gimbals, drones, or other devices. CONNECTION SETTING CARD READER BluetoothUSB SETTINGS WEBCAM PC AUTOXSAVE USB MOVIE SHOOTING AUTO PRINTER CONNECTION SETTING USB MOVIE SHOOTING FIXED CONNECTION MODE USB RAW CONV./BACKUP RESTORE USB POWER SUPPLY SETTING GENERAL SETTINGS INFORMATION RESET WIRELESS SETTING N • Rotate the drive dial to F (movie). • The features available vary with the type of device connected. • Choose USB MOVIE SHOOTING FIXED if the camera will be used solely for tethered movie recording. Note that if the USB cable is disconnected, the camera will continue to function in tethered mode and pictures will not be saved to the camera memory card. Converting RAW Images (FUJIFILM X RAW STUDIO) • Before proceeding, select USB RAW CONV./ BACKUP RESTORE for D CONNECTION SETTING > CONNECTION MODE in the camera menus. • FUJIFILM X RAW STUDIO can be used to convert RAW images to JPEG or TIFF images. CONNECTION SETTING CARD READER BluetoothUSB SETTINGS WEBCAM PC AUTOXSAVE USB MOVIE SHOOTING AUTO PRINTER CONNECTION SETTING USB MOVIE SHOOTING FIXED CONNECTION MODE USB RAW CONV./BACKUP RESTORE USB POWER SUPPLY SETTING GENERAL SETTINGS INFORMATION RESET WIRELESS SETTING N For more information on FUJIFILM X RAW STUDIO, see “Software for Use with Your Camera” (P 298). CONNECTION SETTING CARD READER BluetoothUSB SETTINGS WEBCAM PC AUTOXSAVE USB MOVIE SHOOTING AUTO PRINTER CONNECTION SETTING USB MOVIE SHOOTING FIXED CONNECTION MODE USB RAW CONV./BACKUP RESTORE USB POWER SUPPLY SETTING GENERAL SETTINGS INFORMATION RESET WIRELESS SETTING N For more information on FUJIFILM X Acquire, see “Software for Use with Your Camera” (P 298). 289 Connections Backing up and Restoring Camera Settings (FUJIFILM X Acquire) • Before proceeding, select USB RAW CONV./ BACKUP RESTORE for D CONNECTION SETTING > CONNECTION MODE in the camera menus. • FUJIFILM X Acquire can be used to backup and restore camera settings. 11 Connecting to Smartphones To copy pictures to a smartphone, select OFF for D CONNECTION SETTING > USB POWER SUPPLY SETTING and connect the camera to the phone using a USB cable. For Customers Using Android Devices How you will connect the camera depends on the type of USB connector with which your smartphone is equipped. Type-C Ready a cable equipped with connectors matching the USB (Type-C) connector on the camera. Third-party USB cable Type-C connector (male) Type-C connector (male) Micro-B Use a USB on-the-go (OTG) cable. Supplied USB cable USB OTG cable Connections Type-C connector (male) Type-A connector (male) 11 O • The smartphone must support USB OTG. • The Micro-B connector (male) Type-A connector (female) desired results cannot be achieved with a USB Type-C–to– Mirco-B cable. Use an OTG cable. 290 Connecting via USB 1 Set the camera’s D CONNECTION SETTING > USB POWER SUPPLY SETTING to OFF. 2 Connect the camera and smartphone using a USB cable. N If the smartphone asks for permission for an application other than the “Camera Importer” to access the camera, tap “Cancel” and move on to the next step. 3 On your smartphone, tap the notification “Connected to USB PTP”. 4 From the recommended applications, select “Camera Importer”. The app will automatically start and allow you to import photos and movies to your smartphone. N If the message “There is no MTP device connected” appears on the app, please try again from step 2. Connections 11 291 Connecting via USB For Customers Using iOS An Apple Lightning to USB Camera Adapter is required. Supplied USB cable Type-C connector (male) Apple Lightning to USB Camera Adapter Use an Apple Lightning to USB Camera Adapter Type-A connector (male) 1 Set the camera’s D CONNECTION SETTING > USB POWER SUPPLY SETTING to OFF. 2 Connect the camera and smartphone using a USB cable. Launch the Photos app to import photos and movies to your smartphone. O • A Type-C to Type-C USB cable is required for connection to iPad Pro and iPad Air devices equipped with USB Type-C connectors. desired results cannot be achieved with a USB Type-C–to– Lightning cable. Use a camera adapter. • The Connections 11 292 instax SHARE Printers Print pictures from your digital camera to instax SHARE printers. Establishing a Connection Select D CONNECTION SETTING > instax PRINTER CONNECTION SETTING and enter the instax SHARE printer name (SSID) and password. The Printer Name (SSID) and Password The printer name (SSID) can be found on the bottom of the printer; the default password is “1111”. If you have already chosen a different password to print from a smartphone, enter that password instead. Connections 11 293 instax SHARE Printers Printing Pictures 1 Turn the printer on. 2 Select C PLAY BACK MENU > instax PRINTER PRINT. The camera will connect to the printer. PRINTER PRINT instax-12345678 CONNECTING FUJIFILM-CAMERA-1234 CANCEL 3 Use the focus stick (focus lever) to display the picture you want to print, then press MENU/OK. PRINTER PRINT 100-0020 SET instax-12345678 CANCEL N • Pictures taken with other cameras cannot be printed. • The area printed is smaller than the area visible in the LCD monitor. • The displays may vary depending on the printer connected. 4 The picture will be sent to the printer and printing will start. Connections 11 294 Technical Notes 295 Accessories from Fujifilm The following optional accessories are available from Fujifilm. For the latest information on the accessories available in your region, check with your local Fujifilm representative or visit https://fujifilm-x.com/support/compatibility/cameras/. Rechargeable Li-ion batteries NP-W126S: Additional high-capacity NP-W126S rechargeable batteries can be purchased as required. Battery chargers BC-W126S: Replacement battery chargers can be purchased as required. At +20 °C/+68 °F, the BC-W126S charges an NP-W126S in about 150 minutes. AC power adapters AC-9V (requires CP-W126 DC coupler): Use this 100–240 V, 50/60 Hz AC power adapter for extended shooting and playback or when copying pictures to a computer. DC couplers CP-W126: For extended shooting or playback or when using the camera with a computer, use the CP-W126 to connect the camera to the AC-9V power adapter. Remote releases RR-100: Use to reduce camera shake or keep the shutter open during a time exposure (⌀2.5 mm). Stereo microphones MIC-ST1: An external microphone for movie recording. FUJINON lenses XF-/XC-series lenses: Interchangeable lenses for use exclusively with the FUJIFILM X-mount. FUJINON MKX-series lenses: Cinema lenses for the FUJIFILM X-mount. Technical Notes 12 Macro extension tubes MCEX-11/16: Attach between the camera and the lens to shoot at high reproduction ratios. Teleconverters XF1.4X TC WR: Increases the focal length of the compatible lenses by about 1.4×. XF2X TC WR: Increases the focal length of the compatible lenses by about 2.0×. 296 Accessories from Fujifilm Mount adapters FUJIFILM M MOUNT ADAPTER: Allows the camera to be used with a wide selection of M-mount lenses. Body caps BCP-001: Cover the camera lens mount when no lens is attached. Shoe-mounted flash units EF-X500: In addition to manual and TTL flash control, this clip-on flash unit has a Guide Number of 50/164 (ISO 100, m/ft.) and supports FP (high-speed sync), allowing it to be used at shutter speeds that exceed the flash sync speed. Featuring support for the optional EF-BP1 battery pack and Fujifilm optical wireless flash control, it can be used as a commander or remote flash unit for remote wireless flash photography. EF-BP1: A battery pack for EF-X500 flash units. Takes up to 8 AA batteries. EF-60: In addition to manual and TTL flash control, this clip-on flash unit has a Guide Number of 60/197 (ISO 100, m/ft.) and supports FP (high-speed sync), allowing it to be used at shutter speeds that exceed the flash sync speed. It can also be used as remote flash under the control of an optional EF-W1 wireless commander. EF-W1: With support for the NAS * wireless communication standard developed by Nissin Japan, this wireless flash commander can be used with optional EF-60 clip-on flash units and other NAS-compliant units. * NAS is a registered trademark of Nissin Japan Ltd. EF-42: This clip-on flash unit has a Guide Number of 42/137 (ISO 100, m/ft.) and supports manual and TTL flash control. EF-X20: This clip-on flash unit has a Guide Number of 20/65 (ISO 100, m/ft.) and supports manual and TTL flash control. EF-20: This clip-on flash unit has a Guide Number of 20/65 (ISO 100, m/ft.) and supports TTL flash control (manual flash control is not supported). Technical Notes Grip belts GB-001: Improves grip. Combine with a hand grip for more secure handling. instax SHARE printers SP-1/SP-2/SP-3: Connect via wireless LAN to print pictures on instax film. 12 297 Software for Use with Your Camera The camera can be used with the following software. For the latest information on software available from Fujifilm, visit https://fujifilm-x.com/support/compatibility/cameras/. FUJIFILM Camera Remote Establish a wireless connection between your camera and a smartphone or tablet (P 282). http://app.fujifilm-dsc.com/en/camera_remote/ FUJIFILM PC AutoSave Download pictures from your camera over wireless networks (P 284). http://app.fujifilm-dsc.com/en/pc_autosave/ RAW FILE CONVERTER EX powered by SILKYPIX RAW FILE CONVERTER EX powered by SILKYPIX is RAW conversion software from Ichikawa Soft Laboratory Co., Ltd. View RAW pictures on your computer and convert them into other formats. RAW FILE CONVERTER EX powered by SILKYPIX is available free of charge from the Fujifilm website. https://fujifilm-x.com/support/download/software/raw-file-converterex-powered-by-silkypix/ N “RAW FILE CONVERTER EX powered by SILKYPIX” is supplied by Ichikawa Soft Laboratory Co., Ltd. Technical Notes 12 Capture One Express Fujifilm Capture One Express Fujifilm is image edit software from Capture One A/S. View RAW pictures on your computer and convert them into other formats. Capture One Express Fujifilm is available free of charge from Capture One. https://www.captureone.com/products-plans/capture-one-express/fujifilm N Visit the Capture One A/S website for the latest support information. 298 Software for Use with Your Camera Capture One Pro Fujifilm Capture One Pro Fujifilm is workflow software from Capture One A/S. Capture One Pro Fujifilm supports tethered shooting and the conversion of RAW pictures into other formats. https://www.captureone.com/explore-features/fujifilm O Auto download (tethered shooting) is not supported with some cameras. N Visit the Capture One A/S website for the latest support information. FUJIFILM X Acquire This application for Windows and macOS lets you connect to the camera via USB or Wi-Fi and automatically download photos to a specified folder as they are taken, or backup and restore the camera via USB. https://fujifilm-x.com/products/software/x-acquire/ O Auto download (tethered shooting) is not supported with some cameras. FUJIFILM X RAW STUDIO When the camera is connected to a computer via USB, FUJIFILM X RAW STUDIO can use the camera’s unique image processing engine to rapidly convert RAW files to create high-quality images in other formats. https://fujifilm-x.com/products/software/x-raw-studio/ Technical Notes FUJIFILM X Webcam Connect the camera to a computer via USB to turn it into a webcam. https://fujifilm-x.com/products/software/x-webcam/ 12 299 For Your Safety IMPORTANT SAFETY INSTRUCTIONS Instructions: All the safety and operating instructions • Read Instructions should be read before the appliance is operated. Instructions: The safety and operating instructions • Retain Instructions should be retained for future reference. Warnings: All warnings on the appliance and in the • Heed Warnings operating instructions should be adhered to. Instructions: All operating and use instructions • Follow Instructions should be followed. Technical Notes 12 Installation Power Sources: This video product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For video products intended to operate from battery power, or other sources, refer to the operating instructions. Grounding or Polarization: This video product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. Alternate Warnings: This video product is equipped with a three-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding type plug. Overloading: Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. Ventilation: Slots and openings in the cabinet are provided for ventilation, to ensure reliable operation of the video product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the video product on a bed, sofa, rug, or other similar surface. This video product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to. This video product should never be placed near or over a radiator or heat register. Attachments: Do not use attachments not recommended by the video product manufacturer as they may cause hazards. Water and Moisture: Do not use this video product near water—for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. 300 Power-Cord Protection: Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. Accessories: Do not place this video product on an unstable cart, stand, tripod, bracket, or table. The video product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the video product. Any mounting of the appliance should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. Antennas Outdoor Antenna Grounding: If an outside antenna or cable system is connected to the video product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE Ground Clamp Electric Servicee Equipmentt Antenna Lead in Wire AAnntenna Discharge Unit D (NEC N SECTION 8 810-20) Ground Clamps Power Service Grounding Electrode System (NEC ART 250. PART H) Grounding Conductors (NEC SECTION 810-21) For Your Safety Power Lines: An outside antenna system should not be locat- Damage Requiring Service: Unplug this video product from ed in the vicinity of overhead power lines or other electric the wall outlet and refer servicing to qualified service personlight or power circuits, or where it can fall into such power nel under the following conditions: lines or circuits. When installing an outside antenna system, • When the power-supply cord or plug is damaged extreme care should be taken to keep from touching such • If liquid has been spilled, or objects have fallen into the power lines or circuits as contact with them might be fatal. video product. • If the video product has been exposed to rain or water. Use If the video product has been dropped or the cabinet has Cleaning: Unplug this video product from the wall outlet be- • been damaged. fore cleaning. Do not use liquid cleaners or aerosol cleaners. If the video product does not operate normally follow the Use a damp cloth for cleaning. operating instructions. Adjust only those controls that are Object and Liquid Entry: Never push objects of any kind into covered by the operating instructions as an improper adjustthis video product through openings as they may touch dan- ment of other controls may result in damage and will often gerous voltage points or short out parts that could result in require extensive work by a qualified technician to restore a fire or electric shock. Never spill liquid of any kind on the the video product to its normal operation. video product. When the video product exhibits a distinct change in perforLightning: For added protection for this video product re- mance — this indicates a need for service. ceiver during a lightning storm, or when it is left unattended Replacement Parts: When replacement parts are required, be and unused for long periods of time, unplug it from the wall sure the service technician has used replacement parts specoutlet and disconnect the antenna or cable system. This will ified by the manufacturer or have the same characteristics as prevent damage to the video product due to lightning and the original part. Unauthorized substitutions may result in power-line surges. fire, electric shock or other hazards. Service Safety Check: Upon completion of any service or repairs to Servicing: Do not attempt to service this video product this video product, ask the service technician to perform yourself as opening or removing covers may expose you to safety checks to determine that the video product is in propdangerous voltage or other hazards. Refer all servicing to er operating condition. qualified service personnel. Be sure to read these notes before use Safety Notes • Make sure that you use your camera correctly. Read these The symbols on the product (including the accesories) represent the following: safety notes and your Basic Manual carefully before use. AC • After reading these safety notes, store them in a safe place. DC About the Icons The icons shown below are used in this document to indicate the severity of the injury or damage that can result if the information indicated by the icon is ignored and the product is used incorrectly as a result. Class II equipment (The construction of the product is double-insulated.) WARNING This icon indicates that death or serious inWARNING jury can result if the information is ignored. The icons shown below are used to indicate the nature of the instructions which are to be observed. Triangular icons tell you that this information requires attention (“Important”). Circular icons with a diagonal bar tell you that the action indicated is prohibited (“Prohibited”). Filled circles with an exclamation mark indicate an action that must be performed (“Required”). Unplug from power socket Do not allow water or foreign objects to enter the camera or connecting cables. Do not use the camera or connecting cables following ingress of fresh or salt water, milk, beverages, detergents, or other liquids. Should liquid find its way into the camera or connecting cables, turn the camera off, remove the battery, disconnect the USB cable, and disconnect and unplug the AC adapter. Continued use of the camera can cause a fire or electric shock. Contact your Fujifilm dealer. 301 Technical Notes This icon indicates that personal injury or CAUTION material damage can result if the information is ignored. If a problem arises, turn the camera off, remove the battery, disconnect the USB cable, and unplug the AC power adapter. Continued use of the camera when it is emitting smoke, is emitting any unusual odor, or is in any other abnormal state can cause a fire or electric shock. Contact your Fujifilm dealer. 12 WARNING Do not use in the bathroom or shower Do not disassemble Do not touch internal parts Do not use the camera in the bathroom or shower. This can cause a fire or electric shock. Never attempt to change or take apart the camera (never open the case). Failure to observe this precaution can cause fire or electric shock. Should the case break open as the result of a fall or other accident, do not touch the exposed parts. Failure to observe this precaution could result in electric shock or in injury from touching the damaged parts. Remove the battery immediately, taking care to avoid injury or electric shock, and take the product to the point of purchase for consultation. Do not change, heat or unduly twist or pull the connection cord and do not place heavy objects on the connection cord. These actions could damage the cord and cause a fire or electric shock. If the cord is damaged, contact your Fujifilm dealer. Do not use cables with bent connectors. Do not place the camera on an unstable surface. This can cause the camera to fall or tip over and cause injury. Never attempt to take pictures while in motion. Do not use the camera while walking or driving. This can result in you falling down or being involved in a traffic accident. Do not touch any metal parts of the camera during a thunderstorm. This can cause an electric shock due to induced current from the lightning discharge. Do not use the battery except as specified. Load the battery as shown by the indicator. Technical Notes Do not disassemble, modify, or heat batteries. Do not drop, strike, or throw batteries or otherwise subject them to strong impacts. Do not use batteries that show signs of leaking, deformation, discoloration, or other abnormalities. Use only designated chargers to recharge rechargeable batteries and do not attempt to recharge non-rechargeable Li-ion or alkaline batteries. Do not short batteries or store them with metallic objects. Failure to observe these precautions could result in the batteries overheating, igniting, rupturing, or leaking, causing fire, burns, or other injury. Use only batteries or AC power adapters specified for use with this camera. Do not use voltages other than the power supply voltage shown. The use of other power sources can cause a fire. 12 302 WARNING If the battery leaks and fluid gets in contact with your eyes, skin or clothing, flush the affected area with clean water and seek medical attention or call an emergency number right away. Do not use the charger to charge batteries other than those specified here. The supplied charger is for use only with batteries of the type supplied with the camera. Using the charger to charge conventional batteries or other types of rechargeable batteries can cause the battery to leak, overheat or burst. Using a flash too close to a person’s eyes may cause visual impairment. Take particular care when photographing infants and young children. Do not remain in prolonged contact with hot surfaces. Failure to observe this precaution could result in low-temperature burns, particularly at high ambient temperatures or with users who suffer from poor circulation or reduced sensation, in which case use of a tripod or similar precautions are recommended. Do not leave one part of the body in contact with the product for prolonged periods while the product is on. Failure to observe this precaution could result in low-temperature burns, particularly during prolonged use, at high ambient temperatures, or with users who suffer from poor circulation or reduced sensation, in which case use of a tripod or similar precautions are recommended. Do not use in the presence of flammable objects, explosive gases, or dust. When carrying the battery, install it in a digital camera or keep it in the hard case. When storing the battery, keep it in the hard case. When discarding, cover the battery terminals with insulation tape. Contact with other metallic objects or batteries could cause the battery to ignite or burst. Keep memory cards, hot shoes, and other small parts out of the reach of small children. Children may swallow small parts; keep out of reach of children. Should a child swallow a small part, seek medical attention or call emergency. Keep out of reach of small children. Among the elements that could cause injury are the strap, which could become entangled about a child’s neck, causing strangulation, and the flash, which could cause visual impairment. Follow the directions of airline and hospital personnel. This product generates radio-frequency emissions that could interfere with navigational or medical equipment. For Your Safety CAUTION Do not use this camera in locations affected by oil fumes, steam, humidity or dust. This can cause a fire or electric shock. Do not leave this camera in places subject to extremely high temperatures. Do not leave the camera in locations such as a sealed vehicle or in direct sunlight. This can cause a fire. Do not place heavy objects on the camera. This can cause the heavy object to tip over or fall and cause injury. Do not move the camera while the AC power adapter is still connected. Do not pull on the connection cord to disconnect the AC power adapter. This can damage the power cord or cables and cause a fire or electric shock. Do not cover or wrap the camera or the AC power adapter in a cloth or blanket. This can cause heat to build up and distort the casing or cause a fire. Do not use the plug if it is damaged or if it does not fit securely into the outlet. Failure to observe this precaution could result in fire or electric shock. When you are cleaning the camera or you do not plan to use the camera for an extended period, remove the battery and disconnect and unplug the AC power adapter. Failure to do so can cause a fire or electric shock. When charging ends, unplug the charger from the power socket. Leaving the charger plugged into the power socket can cause a fire. When a memory card is removed, the card could come out of the slot too quickly. Use your finger to hold it and gently release the card. Injury could result to those struck by the ejected card. Request regular internal testing and cleaning for your camera. Build-up of dust in your camera can cause a fire or electric shock. Contact your Fujifilm dealer to request internal cleaning every two years. Please note that this service is not free of charge. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Technical Notes Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. 12 303 The Battery and Power Supply Note: Check the type of battery used in your camera and read ■ Cautions: Handling the Battery the appropriate sections. • Do not transport or store with metal objects such as neckWARNING: Battery shall not be exposed to excessive heat laces or hairpins. • Do not expose to flame or heat. such as sunshine, fire or the like. Do not disassemble or modify. The following describes the proper use of batteries and how • Do not expose to low atmospheric pressures. to prolong their life. Incorrect use can shorten battery life or • • Use with designated chargers only. cause leakage, overheating, fire, or explosion. • Dispose of used batteries promptly. Li-ion Batteries • Do not drop or subject to strong physical shocks. Read this section if your camera uses a rechargeable Li-ion • Do not expose to water. battery. • Keep the terminals clean. The battery is not charged at shipment. Charge the battery • The battery and camera body may become warm to the touch after extended use. This is normal. before use. Keep the battery in its case when not in use. ■ Caution: Disposal ■ Notes on the Battery The battery gradually loses its charge when not in use. Dispose of used batteries in accord with local regulations. Attention should be drawn to the environmental aspects of Charge the battery one or two days before use. battery disposal. Use the apparatus under moderate climate. Battery life can be extended by turning the camera off when Do not mechanically crush or split batteries. not in use. Battery capacity decreases at low temperatures; a depleted AC Power Adapters battery may not function when cold. Keep a fully charged • The AC power adapter is for indoor use only. spare battery in a warm place and exchange as necessary, • Be sure the cable is securely connected to the camera. or keep the battery in your pocket or other warm place and • Turn the camera off before disconnecting the adapter. Disinsert it in the camera only when shooting. Do not place the connect the adapter by the plug, not the cable. battery in direct contact with hand warmers or other heating • Do not disassemble. devices. • Do not expose to high heat and humidity. • Do not subject to strong physical shocks. ■ Charging the Battery The adapter may hum or become hot to the touch during The battery can be charged using a BC-W126S battery char- • use. This is normal. ger (available separately). Charging times will increase at amIf the adapter causes radio interference, reorient or relocate bient temperatures below +10 °C (+50 °F) or above +35 °C • the receiving antenna. (+95 °F). Do not attempt to charge the battery at temperatures above +40 °C (+104 °F); at temperatures below +5 °C (+41 °F), the battery will not charge. Do not attempt to recharge a fully charged battery. The battery does not however need to be fully discharged before charging. The battery may be warm to the touch immediately after charging or use. This is normal. ■ Battery Life Technical Notes A noticeable decrease in the length of time the battery will hold a charge indicates that it has reached the end of its service life and should be replaced. ■ Storage If the camera will not be used for an extended period, store it at room temperature with the battery charged to approximately one half to ⁄ capacity. If the camera will not be used for an extended period, remove the battery and store it in a dry place with an ambient temperature of from +15 °C to +25 °C (+59 °F to +77 °F). Do not store in locations exposed to extremes of temperature. 12 304 For Your Safety Using the Camera Trademark Information including artificial light sources or natural light sources Digital Split Image is a trademark or registered trademark of such as the sun in a cloudless sky. Failure to observe this FUJIFILM Corporation. Digital Micro Prism is a trademark or precaution could damage the camera image sensor. registered trademark of FUJIFILM Corporation. The typefaces • Strong sunlight focused through the viewfinder may dam- included herein are solely developed by DynaComware age the panel of electronic viewfinder (EVF). Do not aim Taiwan Inc. Apple, iPhone, iPad, Mac, OS X, macOS and the electronic viewfinder at the sun. Lightning are registered trademarks of Apple Inc. in the U.S.A. and other countries. Windows is a registered trademark of MiTake Test Shots crosoft Corporation in the U.S.A. and other countries. Android Before taking photographs on important occasions (such as is a trademark or registered trademark of Google LLC. Adobe, at weddings or before taking the camera on a trip), take a the Adobe logo, Photoshop, and Lightroom are trademarks test shot and view the results to ensure that the camera is or registered trademarks of Adobe Systems Incorporated in functioning normally. FUJIFILM Corporation cannot accept the U.S.A. and other countries. Wi-Fi CERTIFIED Logo and Wi-Fi liability for damages or lost profits incurred as a result of Protected Setup® are registered trademarks of Wi-Fi Alliance®. product malfunction. The Bluetooth® word mark and logos are registered tradeNotes on Copyright marks owned by the Bluetooth SIG, Inc., and any use of such Unless intended solely for personal use, images recorded marks by Fujifilm is under license. The SDHC and SDXC logos using your digital camera system cannot be used in ways are trademarks of SD-3C, LLC. The HDMI logo is a trademark or that infringe copyright laws without the consent of the own- registered trademark of HDMI Licensing LLC. All other trade er. Note that some restrictions apply to the photographing names mentioned in this manual are the trademarks or regisof stage performances, entertainments, and exhibits, even tered trademarks of their respective owners. when intended purely for personal use. Users are also asked Electrical Interference to note that the transfer of memory cards containing images This camera may interfere with hospital or aviation equipor data protected under copyright laws is only permissible ment. Consult with hospital or airline staff before using the within the restrictions imposed by those copyright laws. camera in a hospital or on an aircraft. Handling Color Television Systems To ensure that images are recorded correctly, do not subject NTSC (National Television System Committee) is a color telethe camera to impact or physical shocks while images are vision telecasting specification adopted mainly in the U.S.A., being recorded. Canada, and Japan. PAL (Phase Alternation by Line) is a color Liquid Crystal television system adopted mainly in European countries and In the event that the display is damaged, care should be tak- China. en to avoid contact with liquid crystal. Take the urgent action Exif Print (Exif Version 2.32) indicated should any of the following situations arise: Exif Print is a newly revised digital camera file format in which • If liquid crystal comes in contact with your skin, clean the information stored with photographs is used for optimal colarea with a cloth and then wash thoroughly with soap and or reproduction during printing. running water. IMPORTANT NOTICE: Read Before Using the Software • If liquid crystal enters your eyes, flush the affected eye with clean water for at least 15 minutes and then seek medical Direct or indirect export, in whole or in part, of licensed softassistance. ware without the permission of the applicable governing • If liquid crystal is swallowed, rinse your mouth thoroughly bodies is prohibited. with water. Drink large quantities of water and induce vomLenses and Other Accessories iting, then seek medical assistance. • Do not aim the camera at extremely bright light sources, • Use a screw 4.5 mm or shorter when attaching a tripod. • Fujifilm will not be held liable for performance issues or damage caused by the use of third-party accessories. Technical Notes Although the display is manufactured using extremely high-precision technology, it may contain pixels that are always lit or that do not light. This is not a malfunction, and images recorded with the product are unaffected. 12 305 NOTICES To prevent fire or shock hazard, do not expose the unit to rain or moisture. Please read the “Safety Notes” and make sure you understand them before using the camera. Perchlorate Material—special handling may apply. See: http://www.dtsc.ca.gov/hazardouswaste/perchlorate For Customers in the U. S. A. Tested To Comply With FCC Standards FOR HOME OR OFFICE USE Technical Notes Contains IC : 10293A-WMBNBM26A Contains FCC ID : COF-WMBNBM26A FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 12 306 Radiation Exposure Statement: This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Notes on the Grant: To comply with Part 15 of the FCC Rules, this product must be used with a Fujifilm-specified ferrite-core A/V cable, USB cable, and DC supply cord. A lithium ion battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery. California Code of Regulations, Title 20, Division 2, Chapter 4, Article 4, Appliance Efficiency Regulations, Sections 1601 through 1609 For Your Safety For Customers in Canada CAN ICES-3 (B)/NMB-3(B) CAUTION: This Class B digital apparatus complies with Canadian ICES-003. Industry Canada statement: This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios. The County Code Selection feature is disabled for products marketed in the US/ Canada. Radiation Exposure Statement: The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. X-T30 II has been tested and found to comply with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. Disposal of Electrical and Electronic Equipment in Private Households In the European Union, Norway, Iceland and Liechtenstein: This symbol on the product, or in the manual and in the warranty, and/or on its packaging indicates that this product shall not be treated as household waste. Instead it should be taken to an applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences to the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. This symbol on the batteries or accumulators indicates that those batteries shall not be treated as household waste. If your equipment contains easy removable batteries or accumulators please dispose these separately according to your local requirements. The recycling of materials will help to conserve natural resources. For more detailed information about recycling this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. In Countries Outside the European Union, Norway, Iceland and Liechtenstein: If you wish to discard this product, including the batteries or accumulators, please contact your local authorities and ask for the correct way of disposal. In Japan: This symbol on the batteries indicates that they are to be disposed of separately. Caring for the Camera To ensure continued enjoyment of the product, observe the following precautions. Technical Notes Storage and Use If the camera will not be used for an extended period, remove the battery and memory card. Do not store or use the camera in locations that are: • exposed to rain, steam, or smoke • very humid or extremely dusty • exposed to direct sunlight or very high temperatures, such as in a closed vehicle on a sunny day • extremely cold • subject to strong vibration • exposed to strong magnetic fields, such as near a broadcasting antenna, power line, radar emitter, motor, transformer, or magnet • in contact with volatile chemicals such as pesticides • next to rubber or vinyl products 12 307 Wireless Network and Bluetooth Devices: Cautions This product complies with the following EU Directives: • RoHS Directive 2011/65/EU • RE Directive 2014/53/EU Hereby, FUJIFILM Corporation declares that the radio equipment type FF210005 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://dl.fujifilm-x.com/global/products/cameras/x-t30-ii/pdf/x-t30-ii_doc-olg.pdf This compliance is indicated by the following conformity marking placed on the product: Technical Notes This marking is valid for non-Telecom products and EU harmonized Telecom products (e.g. Bluetooth®). • Maximum radio-frequency power (EIRP): WLAN: 3.35 dBm Bluetooth: -3.92 dBm IMPORTANT: Read the following notices before using the camera’s built-in wireless transmitter. Q This product, which contains encryption function developed in the United States, is controlled by the United States Export Administration Regulations and may not be exported or re-exported to any country to which the United States embargoes goods. device. Fujifilm does not accept liability for damages resulting from unauthorized • Use only a wireless network or Bluetooth device. use. Do not use in applications requiring a high degree of reliability, for example in medical devices or other systems that may directly or indirectly impact human life. When using the device in computer and other systems that demand a greater degree of reliability than offered by wireless network or Bluetooth devices, be sure to take all necessary precautions to ensure safety and prevent malfunction. • Use only in the country in which the device was purchased. This device conforms to regulations governing wireless network and Bluetooth devices in the country in which it was purchased. Observe all location regulations when using the device. Fujifilm does not accept liability for problems arising from use in other jurisdictions. • Do not use the device in locations subject to magnetic fields, static electricity, or radio interference. Do not use the transmitter in the vicinity of microwave ovens or in other locations subject to magnetic fields, static electricity, or radio interference that may prevent reception of wireless signals. Mutual interference may occur when the transmitter is used in the vicinity of other wireless devices operating in the 2.4 GHz band. • The wireless transmitter operates in the 2.4 GHz band using DSSS, OFDM and GFSK modulation. • Security: Wireless network and Bluetooth devices transmit data via radio and consequently their use requires greater attention to security than applies in the case of wired networks. - Do not connect to unknown networks or networks to which you do not have access rights, even if they are displayed on your device, as such access may be considered unauthorized. Connect only to networks to which you have access rights. - Be aware that wireless transmissions may be vulnerable to interception by third parties. - This device cannot be directly connected to telecommunications networks (including public wireless LANs) operated by providers or mobile, landline, Internet, or other telecommunications services. • The following may be punishable by law: - Disassembly or modification or this device - Removal of device certification labels • This device operates on the same frequency as commercial, educational, and medical devices and wireless transmitters. It also operates on the same frequency as licensed transmitters and special unlicensed low-voltage transmitters used in RFID tracking systems for assembly lines and in other similar applications. • To prevent interference with the above devices, observe the following precautions. Confirm that the RFID transmitter is not in operation before using this device. Should you observe that the device causes interference in licensed transmitters used for RFID tracking, immediately stop using the affected frequency or move the device to another location. If you notice that this device causes interference in low-voltage RFID tracing systems, contact a Fujifilm representative. • Do not use this device on board an aircraft. Note that Bluetooth may remain on even when the camera is off. Bluetooth can be disabled by selecting OFF for D CONNECTION SETTING > Bluetooth SETTINGS > Bluetooth ON/OFF. 12 308 For Your Safety U.K. Importer: FUJIFILM UK Limited Unit 10A, St Martins Business Centre, St Martins Way, Bedford MK42 0LF, United Kingdom EU Importer: FUJIFILM Electronic Imaging Europe GmbH Fujistrasse 1 47533 Kleve, Germany Technical Notes 12 309 For Your Safety Be sure to read these notes before using the lens Safety Notes WARNING • Make sure that you use the lens correctly. Read these safety notes and the camera Basic Manual carefully before use. • After reading these safety notes, store them in a safe place. About the Icons The icons shown below are used in this document to indicate the severity of the injury or damage that can result if the information indicated by the icon is ignored and the product is used incorrectly as a result. This icon indicates that death or serious WARNING injury can result if the information is ignored. This icon indicates that personal injury or CAUTION material damage can result if the information is ignored. The icons shown below are used to indicate the nature of the instructions which are to be observed. Triangular icons tell you that this information requires attention (“Important”). Circular icons with a diagonal bar tell you that the action indicated is prohibited (“Prohibited”). Filled circles with an exclamation mark indicate an action that must be performed (“Required”). Do not immerse Do not immerse in or expose to water. Failure to observe this precaution can cause a fire or electric shock. Do not disassemble Do not disassemble (do not open the case). Failure to observe this precaution can cause fire, electric shock, or injury due to product malfunction. Do not touch internal parts Should the case break open as the result of a fall or other accident, do not touch the exposed parts. Failure to observe this precaution could result in electric shock or in injury from touching the damaged parts. Remove the battery immediately, taking care to avoid injury or electric shock, and take the product to the point of purchase for consultation. Do not place on unstable surfaces. The product may fall, causing injury. Do not view the sun through the lens or camera viewfinders. Failure to observe this precaution can cause permanent visual impairment. CAUTION Do not use or store in locations that are exposed to steam, or smoke or are very humid or extremely dusty. Failure to observe this precaution can cause fire or electric shock. Do not leave in direct sunlight or in locations subject to very high temperatures, such as in a closed vehicle on a sunny day. Failure to observe this precaution can cause fire. Keep out of the reach of small children. This product could cause injury in the hands of a child. Do not handle with wet hands. Failure to observe this precaution can cause electric shock. Keep the sun out of the frame when shooting backlit subjects. Sunlight focused into the camera when the sun is in or close to the frame can cause fire or burns. Technical Notes When the product is not in use, replace the lens caps and store out of direct sunlight. Sunlight focused by the lens can cause fire or burns. Do not carry the camera or lens while they are attached to a tripod. The product can fall or strike other objects, causing injury. 12 310 Product Care To ensure continued enjoyment of the product, observe the following precautions. Camera body: Use a soft, dry cloth to clean the camera body after each use. Do not use alcohol, thinner, or other volatile chemicals, which could discolor or deform the leather on the camera body. Any liquid on the camera should be removed immediately with a soft, dry cloth. Use a blower to remove dust from the monitor, taking care to avoid scratches, and then gently wipe with a soft, dry cloth. Any remaining stains can be removed by wiping gently with a piece of Fujifilm lens-cleaning paper to which a small amount of lens-cleaning fluid has been applied. To prevent dust entering the camera, replace the body cap when no lens is in place. Image sensor: Multiple photographs marred by spots or blotches in identical locations may indicate the presence of dust on the image sensor. Clean the sensor using D USER SETTING > SENSOR CLEANING. Technical Notes 12 311 Cleaning the Image Sensor Dust that cannot be removed using D USER SETTING > SENSOR CLEANING can be removed manually as described below. O Note that there will be a charge to repair or replace the image sensor if it is damaged during cleaning. 1 Use a blower (not a brush) to remove dust from the sensor. N Do not use a brush or blower brush. Failure to observe this precaution could damage the sensor. 2 Check whether the dust has been successfully removed. Repeat Steps 1 and 2 as necessary. 3 Replace the body cap or lens. Technical Notes 12 312 Firmware Updates Updates to product firmware may result in changes not described in the manual. For more information, visit: https://fujifilm-x.com/support/download/firmware/cameras/ Checking the Firmware Version O The camera will only display the firmware version if a memory card is inserted. 1 2 Turn the camera off and check that a memory card is inserted. 3 Turn the camera off. Turn the camera on while pressing the DISP/BACK button. The current firmware version will be displayed; check the firmware version. N To view the firmware version or update firmware for optional accessories such as interchangeable lenses, shoe-mounted flash units, and mount adapters, mount the accessories on the camera. Technical Notes 12 313 Troubleshooting Consult the table below should you encounter problems using your camera. If you don’t find the solution here, contact your local Fujifilm distributor. Power and Battery Problem Solution • The battery is exhausted: Charge the battery or insert a fully-charged spare battery (P 33). The camera does not turn on. • The battery is inserted incorrectly: Reinsert in the correct orientation (P 30). • The battery-chamber cover is not latched: Technical Notes Latch the battery-chamber cover (P 30). The monitor may not turn on if the camera is turned off The monitor does not and then on again very quickly. Keep the shutter button turn on. pressed halfway until the monitor activates. • The battery is cold: Warm the battery by placing it in a pocket or other warm place and reinsert it in the camera immediately before taking a picture. • There is dirt on the battery terminals: Clean the terminals with a soft, dry cloth. ON is selected for G AF/MF SETTING > PRE-AF: Turn • The battery runs down PRE-AF off (P 132). quickly. • The auto mode selector lever is rotated to w: To extend battery endurance, we recommend that you choose a different mode (P 61). • The battery has been charged many times: The battery has reached the end of its charging life. Purchase a new battery. The battery is exhausted: Charge the battery or insert a The camera turns off fully-charged spare battery (P 33). suddenly. 12 314 Troubleshooting Problem Solution • Insert the camera battery (P 30). • Reinsert the camera battery in the correct orientation (P 30). Charging does not start (USB). • Confirm that the camera is connected to the computer (P 33). • If the computer is off or in sleep mode, turn on or wake the computer and disconnect and reconnect the USB cable (P 33). • Insert the battery. Reinsert the battery in the correct orientation. Charging does not start • Make sure that the charger is correctly plugged in. • (battery charger). • Ensure that the plug adapter is correctly connected to the charger. Charging is slow. Charge the battery at room temperature. • There is dirt on the battery terminals: Clean the terminals with a soft, dry cloth (P 30). The indicator lamp The battery has been charged many times: The battery has • blinks, but the battery reached the end of its charging life. Purchase a new batdoes not charge. tery. If the battery still fails to charge, contact your Fujifilm dealer (P 296). The power supply icon is Confirm that ON is selected for USB POWER SUPPLY not displayed. SETTING (P 243). Technical Notes 12 315 Menus and Displays Problem Solution Select ENGLISH for D USER SETTING > Qa Display is not in English. (P 39, 212). Shooting Problem Solution • The memory card is full: Insert a new memory card or delete pictures (P 30, 192). • The memory card is not formatted: Format the memory card in the camera (P 210). • There is dirt on the memory card contacts: Clean the contacts with a soft, dry cloth. No picture is taken when The memory card is damaged: Insert a new memory card • the shutter button is (P 30). pressed. • The battery is exhausted: Charge the battery or insert a fully-charged spare battery (P 33). • The camera has turned off automatically: Turn the camera on (P 35). • You are using a third-party mount adapter: Select ON for SHOOT WITHOUT LENS (P 230). Mottling (“noise”) Gain is increased to aid composition when the subject is appears in the monitor poorly lit and aperture is stopped down, which may result or viewfinder when in noticeable mottling when images are previewed in the the shutter button is displays. Images taken with the camera are unaffected. pressed halfway. The camera does not The subject is not suited to autofocus: Use focus lock or manual focus. focus (P 82). Technical Notes 12 316 Troubleshooting Technical Notes Problem Solution No panorama is recorded The indicator lamp was orange when you attempted to record a when the shutter button panorama: Wait until the indicator lamps turns off (P 8). is pressed. • The subject’s face is obscured by sunglasses, a hat, long hair, or other objects: Remove the obstructions (P 133). • The subject’s face occupies only a small area of the frame: Change the composition so that the subject’s face occupies a larger area of the frame (P 133). No face is detected. • The subject’s face is turned away from the camera: Ask the subject to face the camera (P 133). • The camera is tilted: Keep the camera level. • The subject’s face is poorly lit: Shoot in bright light. • The flash is disabled: Adjust settings (P 152). • The electronic shutter is enabled: Choose a SHUTTER TYPE that does not use the electronic shutter (P 148). The battery is exhausted: Charge the battery or insert a ful• The flash does not fire. ly-charged spare battery (P 33). • The camera is in bracketing or continuous mode: Select single frame mode (P 5). • The flash is lowered: Raise the flash (P 98). Some flash modes are OFF is selected for SOUND & FLASH: Select ON (P 213). not available. • The subject is not in range of the flash: Position the subject in range of the flash. The flash does not fully The flash window is obstructed: Hold the camera correctly. • light the subject. • Shutter speed is faster than the sync speed: Choose a slower shutter speed (P 56, 60, 330). • The lens is dirty: Clean the lens. • The lens is blocked: Keep objects away from the lens (P 42). Pictures are blurred. • s is displayed during shooting and the focus frame is displayed in red: Check focus before shooting (P 43). 12 317 Problem Solution • Shutter speed is slow and the ambient temperature is high: This is normal and does not indicate a malfunction. * Use pixel mapping (P 117). Pictures are mottled. * X-rays, cosmic rays, and other forms of radiation interacting with the image sensor may cause bright spots of various colors such as white, red, and blue. Pixel mapping helps reduce the occurrence of such bright spots. • The camera has been used continuously at high temperatures: Turn the camera off and wait for it to cool down (P 35, 326). • A temperature warning is displayed: Turn the camera off and wait for it to cool down (P 35, 326). Technical Notes 12 318 Troubleshooting Playback Problem Pictures are grainy. Playback zoom is unavailable. No sound in movie playback. Solution The pictures were taken with a different make or model of camera. The pictures were created using RESIZE or with a different make or model of camera. • Playback volume is too low: Adjust playback volume (P 216). • The microphone was obstructed: Hold the camera correctly during recording. • The speaker is obstructed: Hold the camera correctly during playback. • OFF is selected for SOUND & FLASH: Select ON (P 213). Selected pictures are not deleted. Some of the pictures selected for deletion are protected. Pictures remain after Remove protection using the device with which it was ERASE > ALL FRAMES is originally applied (P 196). selected. The battery-chamber cover was opened while the camFile numbering is era was on. Turn the camera off before opening the batunexpectedly reset. tery-chamber cover (P 236). Technical Notes 12 319 Connections Problem Solution The camera is connected to a TV: Pictures will be displayed The monitor is blank. on the TV instead of in the camera monitor (P 280). EVF ONLY + E is selected for VIEW MODE: Put your eye Both the TV and camera to the viewfinder or choose a different VIEW MODE opmonitor are blank. tion (P 14, 217). • The camera is not properly connected: Connect the camera properly (P 280). No picture or sound • Input on the television is set to “TV”: Set input to “HDMI” on TV. (P 280). • The volume on the TV is too low: Use the controls on the television to adjust the volume (P 280). The computer does not Be sure the camera and computer are correctly connected recognize the camera. (P 285). FUJIFILM X RAW STUDIO Check the option selected for CONNECTION MODE or FUJIFILM X Acquire on the camera. Select USB RAW CONV./BACKUP fails to correctly detect RESTORE before connecting the USB cable (P 289). the camera. ON is selected for USB POWER SUPPLY SETTING. SeCannot connect to lect OFF when the camera is connected via a Lightning iPhones or iPads. connection to a device that do not supply power (P 243). Confirm that the camera is correctly connected: The procedure Cannot connect to for connecting the camera varies with the type of connecsmartphone. tor with which the smartphone is equipped (P 290). Technical Notes 12 320 Troubleshooting Wireless Transfer For additional information on troubleshooting wireless connections, visit: https://digitalcamera-support-en.fujifilm.com/ Problem Cannot connect to smartphone. The camera is slow to connect or upload pictures to the smartphone. Upload fails or is interrupted. Solution • The smartphone is too far away: Move the devices closer (P 282). • Nearby devices are causing radio interference: Move the camera and smartphone away from microwave ovens or cordless phones (P 282). • The smartphone is connected to another device: The smartphone and camera can connect to only one device at a time. End the connection and try again (P 282). • There are several smartphones in the vicinity: Try connecting again. The presence of multiple smartphones can make Cannot upload images. connection difficult (P 282). • The image was created on another device: The camera may not be able to upload images created on other devices. • The image is a movie: Uploading movies takes some time. In addition, smartphones may not accept upload of movies in formats they do not support. Select ON for GENERAL SETTINGS > RESIZE IMAGE Smartphone will not FOR SMARTPHONE H. Selecting OFF increases updisplay pictures. load times for larger images; in addition, some phones may not display images over a certain size (P 244). Technical Notes 12 321 Troubleshooting Miscellaneous Problem Solution • Temporary camera malfunction: Remove and reinsert the battery (P 30). The battery is exhausted: Charge the battery or insert a The camera is unresponsive. • fully-charged spare battery (P 33). • The camera is connected to a wireless LAN: End the connection. The camera does not func- Remove and reinsert the battery (P 30). If the probtion as expected. lem persists, contact your Fujifilm dealer. When NORMAL is selected for PERFORMANCE, the Motion in the viewfinder frame rate will drop if no operations are performed for a or monitor appears jerky set period. The normal frame rate will be restored after rather than smooth. you operate camera controls (P 235). • Adjust the volume (P 215). No sound. • OFF is selected for SOUND & FLASH: Select ON (P 213). Pressing the Q button does TTL-LOCK is active: End TTL-LOCK (P 153). not display the quick menu. Technical Notes 12 322 Warning Messages and Displays The following warnings appear in the display. Warning Description Low battery. Charge the battery or insert a fully-charged i (red) spare battery. Battery exhausted. Charge the battery or insert a fulj (blinks red) ly-charged spare battery. The camera cannot focus. Use focus lock to focus on ans (displayed in red with other subject at the same distance, then recompose the red focus frame) picture. The subject is too bright or too dark and the picture will be Aperture or shutter over- or under-exposed. Use the flash for additional lightspeed displayed in red ing when taking photographs of poorly-lit subject. FOCUS ERROR Camera malfunction. Turn the camera off , remove the lens, LENS CONTROL ERROR and check for foreign matter between the lens and the TURN OFF THE CAMERA camera body, then replace the lens and turn the camera AND TURN ON AGAIN on. If the problem persists, contact a Fujifi lm dealer. • The memory card is not formatted or the memory card has been formatted in a computer or other device: Format the memory card using D USER SETTING > FORMAT. CARD NOT INITIALIZED • The memory card contacts require cleaning: Clean the contacts with a soft, dry cloth. If the message is repeated, format the card. If the message persists, replace the card. • Camera malfunction: Contact a Fujifilm dealer. Technical Notes 12 323 Warning LENS ERROR CARD ERROR PROTECTED CARD BUSY b MEMORY FULL Technical Notes 12 324 Description Turn the camera off , remove the lens, and check for foreign matter between the lens and the camera body, then replace the lens and turn the camera on. If the problem persists, contact a Fujifi lm dealer. • The memory card is not formatted for use in the camera: Format the card. • The memory card contacts require cleaning or the memory card is damaged: Clean the contacts with a soft, dry cloth. If the message is repeated, format the card. If the message persists, replace the card. • Incompatible memory card: Use a compatible card. • Camera malfunction: Contact a Fujifilm dealer. The memory card is locked. Unlock the card. The memory card is incorrectly formatted. Use the camera to format the card. The memory card is full and pictures cannot be recorded. Delete pictures or insert a memory card with more free space. Warning Messages and Displays Warning Description • Memory card error or connection error: Reinsert the card or WRITE ERROR FRAME NO. FULL READ ERROR PROTECTED FRAME turn the camera off and then on again. If the message persists, contact a Fujifilm dealer. • Not enough memory remaining to record additional pictures: Delete pictures or insert a memory card with more free space. • The memory card is not formatted: Format the memory card. • The memory card was removed while data were being recorded: Do not remove the memory card during recording. The camera has run out of frame numbers (current frame number is 999-9999). Insert a formatted memory card and select RENEW for D SAVE DATA SET-UP > FRAME NO.. Take a picture to reset frame numbering to 100-0001, then select CONTINUOUS for FRAME NO.. • The file is corrupt or was not created with the camera: The file cannot be viewed. • The memory card contacts require cleaning: Clean the contacts with a soft, dry cloth. If the message is repeated, format the card. If the message persists, replace the card. • Camera malfunction: Contact a Fujifilm dealer. An attempt was made to delete or rotate to a protected picture. Remove protection and try again. Technical Notes 12 325 Warning Messages and Displays Warning CAN NOT CROP Description The picture is damaged or was not created with the camera. Print orders can contain no more than 999 pictures. Copy any additional pictures you wish to print to another memoDPOF FILE ERROR ry card and create a second print order. The picture cannot be printed using DPOF. CAN NOT SET DPOF F CAN NOT SET DPOF Movies cannot be printed using DPOF. The selected picture cannot be rotated. CAN NOT ROTATE F CAN NOT ROTATE Movies cannot be rotated. F CANNOT EXECUTE Red-eye removal cannot be applied to movies. Red-eye removal cannot be applied to pictures created m CANNOT EXECUTE with other devices. MISMATCH: 4K MODE The movie mode selected with the camera is not compatAND EXTERNAL MONITOR ible with the device to which the camera is connected via CHANGE MOVIE MODE HDMI. Try selecting a different movie mode (P 158). Turn the camera off and wait for it to cool. Mottling may p (yellow) increase in pictures taken when this warning is displayed. Turn the camera off and wait for it to cool. While this warning is displayed, movie recording may not be available, p (red) mottling may increase, and performance, including frame advance rate and display quality, may drop. Technical Notes 12 326 Memory Card Capacity The following table shows the recording time or number of pictures available at different image sizes. All figures are approximate; file size varies with the scene recorded, producing wide variations in the number of files that can be stored. The number of exposures or length remaining may not diminish at an even rate. Capacity T Photos O 3∶2 RAW (UNCOMPRESSED) RAW (LOSSLESS COMPRESSED) RAW (COMPRESSED) FINE 1030 16 GB NORMAL 1540 270 500 FINE 2060 32 GB NORMAL 3090 550 1010 Movies 1, 2 690 1400 V2160 20 minutes 40 minutes W1080 20 minutes 40 minutes 1 Use a UHS speed class 3 card or better. 2 Assumes default bit rate. O If the memory card has a capacity of over 32 GB, movies will be recorded in single files, regardless of size. If the card has a capacity of 32 GB or less, movies over 4 GB in size will be recorded uninterrupted across multiple files. Technical Notes 12 327 Specifications System Model Product Number Effective pixels Image sensor Storage media Memory card slot File format Image size Technical Notes Lens mount 12 328 FUJIFILM X-T30 II FF210005 Approx. 26.1 million 23.5 mm × 15.6 mm (APS-C), X-Trans CMOS 4 sensor with primary color filter Fujifilm-recommended SD/SDHC/SDXC memory cards SD memory card slot (UHS-I compliant) • Still pictures: Compliant with Design Rule for Camera File System (DCF2.0) ⁃ JPEG: Compliant with Exif 2.32 and Digital Print Order Format (DPOF) ⁃ RAW (original RAF format; special purpose software required): Uncompressed, or compressed using either a lossless or non-reversible algorithm; RAW+JPEG available • Movies: MPEG-4 AVC/H.264 standard with stereo sound (MOV/ MP4) • Audio (voice memos): Stereo sound (WAV) O 3∶2 (6240 × 4160) O 1∶1 (4160 × 4160) O 16∶9 (6240 × 3512) P 3∶2 (4416 × 2944) P 1∶1 (2944 × 2944) P 16∶9 (4416 × 2488) Q 3∶2 (3120 × 2080) Q 1∶1 (2080 × 2080) Q 16∶9 (3120 × 1760) RAW (6240 × 4160) O panorama: vertical (2160 × 9600)/horizontal (9600 × 1440) P panorama: vertical (2160 × 6400)/horizontal (6400 × 1440) FUJIFILM X mount Specifications System Sensitivity • Still pictures: Standard output sensitivity equivalent to ISO 160 – 12800 in increments of ⁄ EV; AUTO1; AUTO2; AUTO3; extended output sensitivity equivalent to ISO 80, 100, 125, 25600, or 51200 • Movies: Standard output sensitivity equivalent to ISO 160–12800 in increments of ⁄ EV; AUTO; extended output sensitivity equivalent to ISO 25600 Metering 256-segment through-the-lens (TTL) metering; MULTI, SPOT, AVERAGE, CENTER WEIGHTED Exposure control Programmed AE (with program shift); shutter-priority AE; aperture-priority AE; manual exposure Exposure compensation • Still pictures: −5 EV – +5 EV in increments of ⁄ EV • Movies: −2 EV–+2 EV in increments of ⁄ EV Shutter speed • MECHANICAL SHUTTER ⁃ Mode P: 4 s to ¼ s ⁃ Mode A: 30 s to ¼ s ⁃ Modes S and M: 15 min. to ¼ s ⁃ Bulb: Max. 60 min. • ELECTRONIC SHUTTER ⁃ Mode P: 4 s to ⁄ s ⁃ Mode A: 30 s to ⁄ s ⁃ Modes S and M: 15 min. to ⁄ s ⁃ Bulb: Fixed at 1 s • MECHANICAL + ELECTRONIC ⁃ Mode P: 4 s to ⁄ s ⁃ Mode A: 30 s to ⁄ s ⁃ Modes S and M: 15 min. to ⁄ s ⁃ Bulb: Max. 60 min. Technical Notes 12 329 System Continuous CONTINUOUS MODE 30fps(1.25X CROP) * 20fps(1.25X CROP) * 10fps(1.25X CROP) * 20fps * 10fps * 8.0fps 5.0fps 4.0fps 3.0fps Available frame advance rates (JPEG) 30 20 10 20 10 8.0 5.0 4.0 3.0 * Available with electronic shutter only. O The frame rate and number of frames per burst varies with shooting conditions and type of memory card used. Focus • Mode: Single or continuous AF; manual focus with focus ring • Autofocus system: Intelligent hybrid AF (TTL contrast-detect/ phase-detection AF) with AF-assist illuminator • Focus-area selection: SINGLE POINT, ZONE, WIDE/TRACKING, ALL White balance Self-timer Flash Flash mode Technical Notes 12 Hot shoe Sync contact 330 Auto (WHITE PRIORITY, AUTO, AMBIENCE PRIORITY), Custom 1, Custom 2, Custom 3, color temperature selection, direct sunlight, shade, daylight fluorescent, warm white fluorescent, cool white fluorescent, incandescent, underwater Off, 2 sec., 10 sec. • Type: Manual pop-up flash unit • Guide number: Approx. 7/22 (ISO 200, m/ft.) • MODE: TTL MODE (FLASH AUTO, STANDARD, SLOW SYNC.), MANUAL, COMMANDER, OFF • SYNC. MODE: 1ST CURTAIN, 2ND CURTAIN, AUTO FP (highspeed sync) • RED EYE REMOVAL: e FLASH+REMOVAL, L FLASH, d REMOVAL, OFF Accessory shoe with TTL contacts; supports sync speeds as fast as ⁄ s X contact; supports sync speeds as fast as ⁄ s Specifications System Sync terminal – Electronic viewfinder 0.39-in., 2360k-dot OLED viewfinder; magnification 0.62× with 50 mm lens (35 mm format equivalent) at infinity and diopter (EVF) set to −1.0 m−1; diagonal angle of view approximately 31° (horizontal angle of view approximately 26°) • Diopter adjustment: −4 to +2 m−1 • Eyepoint: Approximately 17.5 mm LCD monitor 3.0-in/7.6 cm, 1620k-dot color touch screen LCD monitor, tilting Movies • Movie size: V 16∶9, d 17∶9, W 16∶9, W 17∶9 (with stereo sound) • Frame rate: 59.94P, 50P, 29.97P, 25P, 24P, 23.98P • Bit rate: 200Mbps, 100Mbps, 50Mbps • Recording/output format: SD card, 4∶2∶0, 8-bit/HDMI output, 4∶2∶2, 10-bit High-speed movies • Movie size: FULL HD 16∶9 • Frame advance rate: 240P, 200P, 120P, 100P Input/output terminals Microphone connector ⌀2.5 mm mini-stereo jack Headphone jack socket Requires a USB Type-C to ⌀3.5 mm stereo mini-pin jack adapter cable compatible with analog audio I/O (USB Type-C Audio Adapter Accessory Mode) Remote release connector ⌀2.5 mm 3-pole mini jack Digital input/output USB connector (Type-C) USB3.2 Gen1x1 HDMI output HDMI Micro connector (type D) Technical Notes 12 331 Power supply/other Power supply NP-W126S rechargeable battery (supplied with camera) Battery life • Battery type: NP-W126S • Lens: XF35mmF1.4 R • External flash units: Disabled • Shooting mode: Mode P Number of shots PERFORMANCE LCD EVF BOOST Approx. 300 Approx. 260 NORMAL Approx. 390 Approx. 360 Total length of footage that can be recorded on a single charge Continuance Actual battery life battery life of Mode of movie capture movie capture Approx. 45 minutes Approx. 60 minutes V1 Approx. 45 minutes Approx. 75 minutes W2 High-speed movies 3 Approx. 40 minutes – 1 At a frame rate of 29.97 fps. 2 At a frame rate of 59.94 fps. 3 At a frame rate of 120 fps. CIPA standard. Measured using battery supplied with camera and SD memory card. Note: Battery endurance varies with battery charge level and the figures given above are not guaranteed. Battery endurance will decline at low temperatures. Technical Notes 12 332 Specifications Power supply/other Camera size 118.4 mm × 82.8 mm × 46.8 mm (31.9 mm excluding projections, (W × H × D) measured at thinnest part)/4.66 in. × 3.26 in. × 1.84 in. (1.26 in.) Camera weight Approx. 329 g/11.6 oz., excluding battery, accessories, and memory card Shooting weight Approx. 378 g/13.3 oz., including battery and memory card Operating conditions • Temperature: 0 °C to +40 °C/+32 °F to +104 °F • Humidity: 10% to 80% (no condensation) Wireless transmitter Wireless LAN Standards Operating frequency (center frequency) Access protocols Bluetooth® Standards Operating frequency (center frequency) IEEE 802.11b/g/n (standard wireless protocol) 2,412 MHz–2,462 MHz (11 channels) Infrastructure Bluetooth version 4.2 (Bluetooth Low Energy) 2,402 MHz–2,480 MHz Technical Notes 12 333 Specifications NP-W126S rechargeable battery Nominal voltage 7.2 V Nominal capacity 1260 mAh Operating 0 °C to +40 °C/+32 °F to +104 °F temperature Dimensions 36.4 mm × 47.1 mm × 15.7 mm/1.4 in. × 1.9 in. × 0.6 in. (W × H × D) Weight Approx. 47 g/1.7 oz. N Weight and dimensions vary with the country or region of sale. O Specifications and performance are subject to change without notice. Fujifilm will not be held liable for any errors this manual may contain. The appearance of the product may differ from that described in this manual. Technical Notes 12 334 MEMO 335 7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN https://fujifilm-x.com

FUJIFILM X-T30 II Camera Owner's Manual

Related manuals

Fujifilm

GFX100S

Fujifilm

X-T100 24.3MP 15-45mm Compact System Camera- Silver

Fujifilm

GFX 50S

Fujifilm

F

Fujifilm

X-H1

Fujifilm

X-H1

Fujifilm

X-T20 Body - Black

Fujifilm

X-T20

Fujifilm

GFX 50R

Fujifilm

X-T20 MIRRORLESS 15-45MM XC

Fujifilm

GFX 50s II

Fujifilm

X-T2