Technics SL-1210GR Operating Instructions

Read before use

Direct Drive Turntable System

Model No.

SL-1200GR / SL-1210GR

■ Make connection to the PHONO terminals and AC IN terminal before setting up or installing the player.

Connecting to the PHONO terminals and AC IN terminal

 Take out the player from the package, attach the “FRONT cushioning” that you can make connection to the PHONO terminals and AC IN terminal on the back side.

 Connect the supplied PHONO cable (product number: K2KYYYY00257), PHONO earth lead (product number:

K4EY1YY00160), and AC mains lead (product number: K2CT3YY00081).

(Red)

(White)

(Black)

Insert the AC mains lead up to a point just before the round hole.

Attention

Be careful not to tip over the player.

FRONT cushioning

Connecting the PHONO earth lead to the player and amplifier.



 

Turn the terminal to the left to loosen.

 Insert the earth lug and tighten the terminal securely.

■ Before fitting the turntable (

There is a magnet and its cover on the back side of the turntable.

Remove the magnet cover before fitting to the main unit.

Back side of the turntable

Magnet cover

Magnet

Fixing screw

Attention

・ Keep any magnetic-sensitive object such as a magnetic card and watch away from the magnet.

・ Prevent the turntable from hitting the main unit or falling off.

Prevent dust or iron powder from adhering to the magnet on the back side.

・ Do not touch the fixing screws (three locations) of the turntable.

The rating performance cannot be guaranteed if they are out of position.

TQBM7018

S0217AK0