advertisement
▼
Scroll to page 2
of
368
![Fujifilm X-T2 MIRRORLESS 18-55MM XF BLK Instruction Manual | Manualzz Fujifilm X-T2 MIRRORLESS 18-55MM XF BLK Instruction Manual | Manualzz](http://s2.manualzz.com/store/data/061750319_1-bc1462b867988ad97c686bb5bd00ccb2-360x466.png)
Version 2.10 Owner’s Manual BL00004832-205 EN Introduction Thank you for your purchase of this product. Be sure that you have read this manual and understood its contents before using the camera. Keep the manual where it will be read by all who use the product. For the Latest Information For the latest information on this product, including the latest versions of the manuals and sample color photographs, visit: http://fujifilm-dsc.com/manuals/ The site can be accessed not only from your computer but also from smartphones and tablets. ii P Chapter Index Menu List 1 Before You Begin iv 1 2 First Steps 25 3 Basic Photography and Playback 47 4 Movie Recording and Playback 53 5 Taking Photographs 61 6 The Shooting Menus 113 7 Playback and the Playback Menu 171 8 The Setup Menus 201 9 Shortcuts 249 10 Peripherals and Optional Accessories 263 11 Connections 291 12 Technical Notes 303 iii Menu List Camera menu options are listed below. Menu List Shooting Menus Adjust settings when shooting photos or movies. N See page 113 for details. H IMAGE QUALITY SETTING IMAGE SIZE IMAGE QUALITY RAW RECORDING SIMULATION 1⁄3 FILM GRAIN EFFECT DYNAMIC RANGE WHITE BALANCE HIGHLIGHT TONE SHADOW TONE COLOR SHARPNESS NOISE REDUCTION 2⁄3 LONG EXPOSURE NR LENS MODULATION OPTIMIZER COLOR SPACE PIXEL MAPPING SELECT CUSTOM SETTING 3⁄3 EDIT/SAVE CUSTOM SETTING iv P G AF/MF SETTING P 115 FOCUS AREA 133 116 AF MODE 134 117 AF-C CUSTOM SETTINGS 135 118 STORE AF MODE BY 140 120 1⁄2 ORIENTATION 121 AF POINT DISPLAYyz 140 122 NUMBER OF FOCUS POINTS 141 126 PRE-AF 141 126 AF-ILLUMINATOR 142 127 FACE/EYE DETECTION 143 127 SETTING 128 AF+MF 145 128 MF ASSIST 146 146 129 2⁄2 FOCUS CHECK INTERLOCK SPOT AE & 147 129 FOCUS AREA 130 INSTANT AF SETTING 147 131 DEPTH-OF-FIELD SCALE 148 RELEASE/FOCUS PRIORITY 148 131 Menu List P F FLASH SETTING P 149 151 152 154 155 156 158 161 162 163 164 165 165 166 FLASH FUNCTION SETTING RED EYE REMOVAL TTL-LOCK MODE LED LIGHT SETTING MASTER SETTING CH SETTING B MOVIE SETTING MOVIE MODE MOVIE AF MODE HDMI OUTPUT INFO DISPLAY 4K MOVIE OUTPUT HDMI REC CONTROL MIC LEVEL ADJUSTMENT P 167 168 168 169 170 170 The Playback Menu Adjust playback settings. N See page 178 for details. C PLAY BACK MENU SWITCH SLOT RAW CONVERSION ERASE 1⁄3 CROP RESIZE PROTECT IMAGE ROTATE RED EYE REMOVAL P C PLAY BACK MENU 178 VOICE MEMO SETTING 179 COPY 182 WIRELESS 185 COMMUNICATION 186 2⁄3 SLIDE SHOW 187 PHOTOBOOK ASSIST 188 PC AUTO SAVE 189 PRINT ORDER (DPOF) instax PRINTER PRINT 3⁄3 DISP ASPECT P 190 191 192 193 194 196 197 199 200 v Menu List A SHOOTING SETTING DRIVE SETTING SELF-TIMER INTERVAL TIMER SHOOTING SHUTTER TYPE IS MODE ISO AUTO SETTING MOUNT ADAPTOR SETTING WIRELESS COMMUNICATION Setup Menus Adjust basic camera settings. Menu List N See page 201 for details. D USER SETTING FORMAT DATE/TIME TIME DIFFERENCE a MY MENU SETTING SENSOR CLEANING RESET D SOUND SETTING AF BEEP VOL. SELF-TIMER BEEP VOL. OPERATION VOL. HEADPHONES VOLUME SHUTTER VOLUME SHUTTER SOUND PLAYBACK VOLUME vi P D SCREEN SETTING 203 EVF BRIGHTNESS 204 EVF COLOR 205 LCD BRIGHTNESS 206 LCD COLOR 206 1⁄2 IMAGE DISP. 208 AUTOROTATE DISPLAYS 209 PREVIEW EXP./WB IN MANUAL MODE P PREVIEW PIC. EFFECT 210 FRAMING GUIDELINE 211 AUTOROTATE PB 211 212 2⁄2 FOCUS SCALE UNITS DUAL DISPLAY SETTING 212 DISP. CUSTOM SETTING 213 213 P 214 215 215 216 216 217 217 218 219 220 220 221 221 Menu List P D POWER MANAGEMENT P 237 223 AUTO POWER OFF 238 224 PERFORMANCE P D SAVE DATA SETTING 226 FRAME NO. 239 240 228 SAVE ORG IMAGE EDIT FILE NAME 241 228 CARD SLOT SETTING (STILL 241 229 IMAGE) 229 SWITCH SLOT (SEQUENTIAL) 242 230 MOVIE FILE DESTINATION 242 230 COPYRIGHT INFO 243 231 P D CONNECTION SETTING 232 244 233 WIRELESS SETTINGS 245 233 PC AUTO SAVE SETTING 246 234 GEOTAGGING SET-UP 234 instax PRINTER CONNECTION 246 235 SETTING 247 236 PC SHOOT MODE INFORMATION 248 vii Menu List D BUTTON/DIAL SETTING FOCUS LEVER SETTING EDIT/SAVE QUICK MENU Fn/AE-L/AF-L BUTTON SETTING 1⁄3 SELECTOR BUTTON SETTING COMMAND DIAL SETTING o S.S. OPERATION ISO DIAL SETTING (H) ISO DIAL SETTING (L) ISO DIAL SETTING (A) SHUTTER AF SHUTTER AE WITHOUT LENS 2⁄3 SHOOT SHOOT WITHOUT CARD FOCUS RING AE/AF-LOCK MODE APERTURE SETTING 3⁄3 LOCK P Table of Contents Introduction ................................................................................. ii For the Latest Information..............................................................ii Menu List...................................................................................... iv Shooting Menus ................................................................................. iv The Playback Menu ........................................................................... v Setup Menus......................................................................................... vi Supplied Accessories .............................................................. xx About This Manual.................................................................. xxi Symbols and Conventions .........................................................xxi Terminology .......................................................................................xxii 1 Before You Begin 1 Parts of the Camera ................................................................... 2 The Selector............................................................................................ 4 The Focus Stick ..................................................................................... 4 The Shutter Speed and Sensitivity Dials ............................... 5 The Drive Dial ........................................................................................ 5 The Metering Dial ............................................................................... 6 The Exposure Compensation Dial ............................................ 6 The Command Dials ......................................................................... 7 The Indicator Lamp ........................................................................... 9 The LCD Monitor .............................................................................. 10 Focusing the Viewfinder .............................................................. 11 The Eye Cup ........................................................................................ 11 viii Table of Contents Camera Displays .......................................................................12 The Electronic Viewfinder ........................................................... 12 The LCD Monitor .............................................................................. 14 Choosing a Display Mode .......................................................... 16 Adjusting Display Brightness .................................................... 17 Display Rotation................................................................................ 17 The DISP/BACK Button ................................................................. 18 The Dual Display............................................................................... 19 Customizing the Standard Display ....................................... 20 Using the Menus ......................................................................23 2 First Steps 25 Attaching the Strap .................................................................26 Attaching a Lens .......................................................................28 Charging the Battery ..............................................................30 Inserting the Battery ...............................................................34 Inserting Memory Cards ........................................................37 Using Two Cards ............................................................................... 39 Compatible Memory Cards ....................................................... 40 Turning the Camera On and Off .........................................42 Checking the Battery Level...................................................43 Basic Setup .................................................................................44 Choosing a Different Language.............................................. 46 Changing the Time and Date ................................................... 46 ix 3 Basic Photography and Playback 47 Taking Photographs (Mode P) .............................................48 a Viewing Pictures.................................................................51 b Deleting Pictures .................................................................52 4 Movie Recording and Playback 53 F Recording Movies ..............................................................54 Adjusting Movie Settings............................................................ 57 a Viewing Movies...................................................................58 5 Taking Photographs 61 P, S, A, and M Modes................................................................62 Mode P: Program AE ...................................................................... 62 Mode S: Shutter-Priority AE ....................................................... 64 Mode A: Aperture-Priority AE ................................................... 69 Mode M: Manual Exposure ........................................................ 72 Autofocus....................................................................................74 Focus Mode ......................................................................................... 75 Autofocus Options (AF Mode) ................................................. 77 Focus-Point Selection.................................................................... 79 Manual Focus.............................................................................84 Checking Focus................................................................................. 86 x Table of Contents N Sensitivity .............................................................................88 Auto Sensitivity (A) .......................................................................... 89 C Metering ...............................................................................91 d Exposure Compensation.................................................92 C (Custom) ........................................................................................... 92 Focus/Exposure Lock ..............................................................93 The AF-L and AE-L Buttons ........................................................ 94 BKT Bracketing............................................................................95 O AE BKT ............................................................................................. 96 W ISO BKT........................................................................................... 96 X FILM SIMULATION BKT ......................................................... 96 H WHITE BALANCE BKT............................................................. 97 Y DYNAMIC RANGE BKT........................................................... 97 I Continuous Shooting (Burst Mode) ............................98 j Multiple Exposures ......................................................... 100 ADV. Advanced Filters............................................................ 102 Advanced Filter Options ............................................................103 u Panoramas ........................................................................ 104 Flash Photography................................................................ 108 Flash Settings ...................................................................................110 xi 6 The Shooting Menus 113 H IMAGE QUALITY SETTING ............................................. 114 IMAGE SIZE .........................................................................................115 IMAGE QUALITY ..............................................................................116 RAW RECORDING ...........................................................................117 FILM SIMULATION ..........................................................................118 GRAIN EFFECT ..................................................................................120 DYNAMIC RANGE ...........................................................................121 WHITE BALANCE .............................................................................122 HIGHLIGHT TONE ...........................................................................126 SHADOW TONE ...............................................................................126 COLOR ...................................................................................................127 SHARPNESS ........................................................................................127 NOISE REDUCTION ........................................................................128 LONG EXPOSURE NR ....................................................................128 LENS MODULATION OPTIMIZER ...........................................129 COLOR SPACE ...................................................................................129 PIXEL MAPPING ...............................................................................130 SELECT CUSTOM SETTING........................................................131 EDIT/SAVE CUSTOM SETTING .................................................131 G AF/MF SETTING ................................................................ 133 FOCUS AREA .....................................................................................133 AF MODE .............................................................................................134 AF-C CUSTOM SETTINGS...........................................................135 STORE AF MODE BY ORIENTATION ......................................140 AF POINT DISPLAY y z ......................................................140 xii Table of Contents NUMBER OF FOCUS POINTS ...................................................141 PRE-AF...................................................................................................141 AF ILLUMINATOR ............................................................................142 FACE/EYE DETECTION SETTING ............................................143 AF+MF ..................................................................................................145 MF ASSIST ...........................................................................................146 FOCUS CHECK ..................................................................................146 INTERLOCK SPOT AE & FOCUS AREA..................................147 INSTANT AF SETTING ...................................................................147 DEPTH-OF-FIELD SCALE.............................................................148 RELEASE/FOCUS PRIORITY .......................................................148 A SHOOTING SETTING ........................................................ 149 DRIVE SETTING.................................................................................149 SELF-TIMER .........................................................................................151 INTERVAL TIMER SHOOTING ....................................................152 SHUTTER TYPE .................................................................................154 IS MODE ...............................................................................................155 ISO AUTO SETTING ........................................................................156 MOUNT ADAPTOR SETTING ....................................................158 WIRELESS COMMUNICATION .................................................161 F FLASH SETTING................................................................. 162 FLASH FUNCTION SETTING .....................................................162 RED EYE REMOVAL ........................................................................163 TTL-LOCK MODE .............................................................................164 LED LIGHT SETTING ......................................................................165 MASTER SETTING ...........................................................................165 CH SETTING .......................................................................................166 xiii B MOVIE SETTING ................................................................ 167 MOVIE MODE....................................................................................167 MOVIE AF MODE ............................................................................168 HDMI OUTPUT INFO DISPLAY.................................................168 4K MOVIE OUTPUT ........................................................................169 HDMI REC CONTROL....................................................................170 MIC LEVEL ADJUSTMENT ..........................................................170 7 Playback and the Playback Menu 171 The Playback Display ........................................................... 172 The DISP/BACK Button ...............................................................174 Viewing Pictures .................................................................... 176 Playback Zoom ................................................................................177 Multi-Frame Playback ..................................................................177 C The Playback Menu ......................................................... 178 SWITCH SLOT ....................................................................................178 RAW CONVERSION ........................................................................179 ERASE.....................................................................................................182 CROP ......................................................................................................185 RESIZE....................................................................................................186 PROTECT ..............................................................................................187 IMAGE ROTATE .................................................................................188 RED EYE REMOVAL ........................................................................189 VOICE MEMO SETTING ...............................................................190 COPY ......................................................................................................191 WIRELESS COMMUNICATION .................................................192 SLIDE SHOW ......................................................................................193 PHOTOBOOK ASSIST ....................................................................194 xiv Table of Contents PC AUTO SAVE..................................................................................196 PRINT ORDER (DPOF) ...................................................................197 instax PRINTER PRINT ...................................................................199 DISP ASPECT .....................................................................................200 8 The Setup Menus 201 D USER SETTING ................................................................... 202 FORMAT ...............................................................................................203 DATE/TIME ..........................................................................................204 TIME DIFFERENCE ..........................................................................205 a........................................................................................206 MY MENU SETTING .......................................................................206 SENSOR CLEANING .......................................................................208 RESET .....................................................................................................209 D SOUND SETTING .............................................................. 210 AF BEEP VOL. .....................................................................................210 SELF-TIMER BEEP VOL. .................................................................211 OPERATION VOL. .............................................................................211 HEADPHONES VOLUME .............................................................212 SHUTTER VOLUME .........................................................................212 SHUTTER SOUND ...........................................................................213 PLAYBACK VOLUME ......................................................................213 D SCREEN SETTING .............................................................. 214 EVF BRIGHTNESS.............................................................................214 EVF COLOR .........................................................................................215 LCD BRIGHTNESS............................................................................215 LCD COLOR ........................................................................................216 IMAGE DISP. ........................................................................................216 xv xvi AUTOROTATE DISPLAYS..............................................................217 PREVIEW EXP./WB IN MANUAL MODE ...............................217 PREVIEW PIC. EFFECT ...................................................................218 FRAMING GUIDELINE ...................................................................219 AUTOROTATE PB .............................................................................220 FOCUS SCALE UNITS ....................................................................220 DUAL DISPLAY SETTING .............................................................221 DISP. CUSTOM SETTING..............................................................221 D BUTTON/DIAL SETTING ................................................. 223 FOCUS LEVER SETTING ...............................................................223 EDIT/SAVE QUICK MENU............................................................224 Fn/AE-L/AF-L BUTTON SETTING ...........................................226 SELECTOR BUTTON SETTING ..................................................228 COMMAND DIAL SETTING .......................................................228 o S.S. OPERATION .......................................................................229 ISO DIAL SETTING (H) ..................................................................229 ISO DIAL SETTING (L) ...................................................................230 ISO DIAL SETTING (A)...................................................................230 SHUTTER AF.......................................................................................231 SHUTTER AE.......................................................................................232 SHOOT WITHOUT LENS ..............................................................233 SHOOT WITHOUT CARD ............................................................233 FOCUS RING ......................................................................................234 AE/AF-LOCK MODE .......................................................................234 APERTURE SETTING ......................................................................235 LOCK.......................................................................................................236 D POWER MANAGEMENT .................................................. 237 AUTO POWER OFF .........................................................................237 PERFORMANCE................................................................................238 Table of Contents D SAVE DATA SETTING ........................................................ 239 FRAME NO. .........................................................................................239 SAVE ORG IMAGE ...........................................................................240 EDIT FILE NAME ...............................................................................241 CARD SLOT SETTING (STILL IMAGE)....................................241 SWITCH SLOT (SEQUENTIAL) ...................................................242 MOVIE FILE DESTINATION .........................................................242 COPYRIGHT INFO ...........................................................................243 D CONNECTION SETTING .................................................. 244 WIRELESS SETTINGS .....................................................................244 PC AUTO SAVE SETTING .............................................................245 GEOTAGGING SET-UP ..................................................................246 instax PRINTER CONNECTION SETTING ...........................246 PC SHOOT MODE ...........................................................................247 INFORMATION ..................................................................................248 9 Shortcuts 249 Shortcut Options................................................................... 250 The Q (Quick Menu) Button............................................... 251 The Quick Menu Display ...........................................................251 Viewing and Changing Settings...........................................253 Editing the Quick Menu .............................................................254 The Fn (Function) Buttons ................................................. 256 Assigning Roles to the Function Buttons........................258 E MY MENU ............................................................................ 260 MY MENU SETTING .......................................................................260 xvii 10 Peripherals and Optional Accessories 263 External Flash Units .............................................................. 264 Flash Settings ...................................................................................265 SYNC TERMINAL ..............................................................................267 SUPPLIED FLASH.............................................................................269 SHOE MOUNT FLASH ..................................................................271 MASTER(OPTICAL) .........................................................................275 Vertical Power Booster Grips............................................. 280 Using the VPB-XT2 .........................................................................281 Charging the Batteries ................................................................283 Lenses........................................................................................ 284 Lens Parts ............................................................................................284 Removing Lens Caps ...................................................................285 Attaching Lens Hoods ................................................................285 Lenses with Aperture Rings.....................................................286 Lenses with No Aperture Rings.............................................287 Lenses with O.I.S. Switches.......................................................287 Manual Focus Lenses...................................................................288 Lens Care .............................................................................................289 xviii Table of Contents 291 11 Connections HDMI Output .......................................................................... 292 Connecting to HDMI Devices ................................................292 Shooting ..............................................................................................293 Playback ...............................................................................................293 Wireless Transfer .................................................................... 294 Wireless Connections: Smartphones .................................294 Wireless Connections: Computers ......................................295 Connecting to Computers via USB ................................. 296 Tethered Shooting ........................................................................296 Copying Pictures to a Computer..........................................297 Connecting the Camera ............................................................298 instax SHARE Printers .......................................................... 301 Establishing a Connection .......................................................301 Printing Pictures..............................................................................302 12 Technical Notes 303 Accessories from FUJIFILM ................................................ 304 For Your Safety ....................................................................... 308 Product Care ........................................................................... 321 Cleaning the Image Sensor ............................................... 322 Firmware Updates................................................................. 323 Checking the Firmware Version ............................................323 Troubleshooting .................................................................... 324 Warning Messages and Displays ..................................... 332 Memory Card Capacity ....................................................... 336 Specifications ......................................................................... 337 xix Supplied Accessories The following are included with the camera: • NP-W126S rechargeable battery • BC-W126 battery charger • EF-X8 shoe mounted flash unit • Body cap • Metal strap clips (× 2) • Clip attaching tool • Protective covers (× 2) • Shoulder strap • Hot shoe cover (comes attached to hot shoe) • Sync terminal cap (comes attached to camera) • Vertical battery grip connector cover (comes attached to camera) • Owner’s Manual (this manual) N If you purchased a lens kit, check that a lens is included. xx About This Manual This manual contains instructions for your FUJIFILM X-T2 digital camera. Be sure you have read and understood its contents before proceeding. Symbols and Conventions The following symbols are used in this manual: O Information that should be read to prevent damage to the product. N Additional information that may be helpful when using the product. P Pages on which related information may be found. Menus and other text in the displays are shown in bold. Illustrations are for explanatory purposes only; drawings may be simplified, while photographs are not necessarily taken with the model of camera described in this manual. xxi About This Manual Terminology The optional SD, SDHC, and SDXC memory cards the camera uses to store pictures are referred to as “memory cards”. The electronic viewfinder may be referred to as the “EVF” and the LCD monitor as the “LCD”. xxii Before You Begin 1 Parts of the Camera 1 Before You Begin A Exposure compensation dial .........................................................6, 92 B Shutter button ................................ 50 C Fn1 button .....................................256 D Shutter speed dial..................5, 64, 72 E Dial lock release ................................5 F Hot shoe .........................................108 G Microphone ...................................170 H Diopter adjustment control ........ 11 I Sensitivity dial ....................5, 88, 229 J Drive dial .............................................5 K Strap eyelet ...................................... 26 L Sync terminal ................................267 M Connector cover N Focus mode selector ..................... 75 O Lens signal contacts 2 P Lens release button ....................... 29 Q Fn2 button .....................................256 R AF-assist illuminator...................142 Self-timer lamp ............................151 S Metering dial ...............................6, 91 T Front command dial.............. 7, 228 U ON/OFF switch ................................ 42 V Hot shoe cover ..............................108 W Body cap........................................... 28 X Microphone jack (⌀ 3.5 mm) ..... 55 Y Micro USB (Micro-B) USB 3.0/USB 2.0 connector ..............................33, 68, 298 Z HDMI Micro connector (Type D) ...........................................................292 a Remote release connector (⌀ 2.5 mm)....................................... 68 Parts of the Camera 1 Before You Begin b b (delete) button .......................... 52 o Selector buttons ...................... 4, 228 c a (playback) button .................. 51 p MENU/OK button ........................4, 23 d Electronic viewfinder (EVF) q DISP (display)/BACK button ................................................12, 16, 17 ....................................................18, 174 e Eye cup .............................................. 11 f VIEW MODE button ........................ 16 g AE-L (exposure lock) button ........ 94 h Rear command dial r Speaker ............................................. 58 s Battery-chamber cover latch ..... 34 t Battery-chamber cover ................ 34 u Tripod mount v Vertical battery grip connector ............................................. 7, 176, 228 i AF-L (focus lock) button.................94 j Indicator lamp ............................9, 33 k Q (quick menu) button ...............251 l Memory card slot cover ............... 37 m Focus stick (focus lever) ................................................4, 80, 223 n Memory card slot cover latch..... 37 cover ................................................280 w LCD monitor...................10, 14, 16, 17 x Eye sensor......................................... 16 y Memory card slots 1 and 2 ......... 37 z Battery chamber ............................ 34 0 Battery latch.................................... 36 3 The Selector Press the selector up (e), right (h), down (f), or left (g) to highlight items. 1 Control Lock Before You Begin To prevent accidental operation of the selector and Q button during shooting, press MENU/OK until X is displayed. The controls can be unlocked by pressing MENU/OK until X is no longer displayed. The Focus Stick Tilt or press the focus stick to select the focus area. 4 Parts of the Camera The Shutter Speed and Sensitivity Dials Press the dial lock release to release the dial before rotating it to the desired setting. Press the release again to lock the dial in place. The Drive Dial Rotate the dial to choose from the following the drive modes. F BKT CH CL Mode Movie Bracketing High-speed burst Low-speed burst P Mode 54 S Single frame 95 j Multiple exposure ADV. Advanced filter 98 u Panorama P 48 100 102 104 5 1 Before You Begin Sensitivity Shutter speed The Metering Dial Rotate the dial to choose the metering mode. 1 Before You Begin The Exposure Compensation Dial Rotate the dial to choose an exposure compensation amount. 6 Parts of the Camera The Command Dials Rotate or press the command dials to: Front command dial 1 • Select menu tabs or page through menus. • Adjust aperture. • Adjust exposure compensation when C is selected with exposure compensation dial. • View other pictures during playback. Press Switch back and forth between aperture and exposure compensation when C is selected with the exposure compensation dial. 7 Before You Begin Rotate Rear command dial 1 Before You Begin • Highlight menu items. • Choose the desired combination of shutter speed Rotate and aperture (program shift). • Choose a shutter speed. • Adjust settings in the quick menu. • Choose the size of the focus frame. • Zoom in or out during focus zoom or in full frame or multi-frame playback. • Perform the function assigned to the DIAL function Press button. • Zoom in on the active focus point. • Press and hold to choose the manual focus mode fo* cus display. * • Zoom in on the active focus point during playback. * Available only if FOCUS CHECK is assigned to a function button. 8 Parts of the Camera The Indicator Lamp When the viewfinder is not in use, camera status is shown by the indicator lamp. 1 Camera status Focus locked. Focus or exposure warning. Pictures can be taken. Recording pictures. Additional pictures can be taken. Recording pictures. No additional pictures can be Glows orange taken at this time. Blinks orange Flash charging; flash will not fire when picture is taken. Blinks red Lens or memory error. N Warnings may also appear in the display. 9 Before You Begin Indicator lamp Glows green Blinks green Blinks green and orange Before You Begin The LCD Monitor The LCD monitor can be tilted for easier viewing, but be careful not to touch the wires or trap fingers or 1 other objects behind the monitor. Touching the wires could cause camera malfunction. “Tall” (Portrait) Orientation When the camera is rotated to take pictures in “tall” (portrait) orientation, you can tilt the display as shown. This is particularly useful when taking pictures from low or high angles. N Hold the camera as shown when taking “tall” (portrait) orientation pictures from high angles. 10 Parts of the Camera Focusing the Viewfinder The camera is equipped with diopter adjustment in the range −4 to +2 m–1 to accommodate individual differences in vision. Rotate the diopter adjustment control until the viewfinder display is in sharp focus. 1 Before You Begin The Eye Cup To remove the eye cup, press the bottom in with both thumbs and slide eye cup up. 11 Camera Displays This section lists the indicators that may be displayed during shooting. 1 O For illustrative purposes, displays are shown with all indicators lit. Before You Begin The Electronic Viewfinder 12/31/2016 12:00 AM 12 Camera Displays Before You Begin A IS mode ...........................................155 S Boost mode ...................................238 B Flash (TTL) mode .........................110 T Histogram ........................................ 22 Flash compensation ...................110 U Battery level ..................................... 43 C Self-timer indicator .....................151 V Sensitivity ......................................... 88 D Continuous mode.......................... 98 W Exposure compensation .............. 92 E Shutter type ...................................154 X Aperture...............................63, 69, 72 F AF+MF indicator..........................145 Y Shutter speed .....................63, 64, 72 1 G White balance ..............................122 Z AE lock......................................94, 232 TTL lock ........................ 164, 227, 259 H Film simulation ............................118 I Dynamic range ............................121 a Metering ........................................... 91 J Location data download b Shooting mode............................... 62 status ...............................................246 c Focus mode † ................................... 75 K Date and time...............44, 204, 205 d Distance indicator ......................... 86 L Movie mode ...........................54, 167 e Recording level .............................170 M Time remaining .............................. 54 f Exposure indicator.................. 72, 92 N Card slot options ...................39, 241 g Virtual horizon................................ 21 O Number of available frames * ...336 h Focus frame .............................. 79, 93 P Image quality and size ......115, 116 i Depth-of-field preview.......... 70, 86 Q Temperature warning ................335 j Focus check ............................86, 146 R Control lock ........................................4 * Shows “9999” if there is space for over 9999 frames. † In-focus ( ) or manual focus (j) indicator may also be displayed. Control Lock Pressing a locked control displays a X icon. 13 The LCD Monitor 12/31/2016 12:00 AM 1 Before You Begin 14 Camera Displays A IS mode ...........................................155 B Focus check ............................86, 146 C Depth-of-field preview.......... 70, 86 D Recording level .............................170 E Distance indicator ......................... 86 F Location data download status ...............................................246 TTL lock ........................ 164, 227, 259 a Metering ........................................... 91 b Shooting mode............................... 62 c Focus mode † ................................... 75 d AF+MF indicator..........................145 e Shutter type ...................................154 f Continuous mode.......................... 98 g Exposure indicator.................. 72, 92 h Self-timer indicator .....................151 i Flash (TTL) mode .........................110 Flash compensation ...................110 * Shows “9999” if there is space for over 9999 frames. † In-focus ( ) or manual focus (j) indicator may also be displayed. Control Lock Pressing a locked control displays a X icon. 15 Before You Begin G Focus frame .............................. 79, 93 H Date and time...............44, 204, 205 I Movie mode ...........................54, 167 J Time remaining .............................. 54 K Card slot options ...................39, 241 L Number of available frames * ...336 M Image quality and size ......115, 116 N Temperature warning ................335 O Film simulation ............................118 P White balance ..............................122 Q Dynamic range ............................121 R Control lock ........................................4 S Boost mode ...................................238 T Histogram ........................................ 22 U Battery level ..................................... 43 V Sensitivity ......................................... 88 W Exposure compensation .............. 92 X Aperture...............................63, 69, 72 Y Shutter speed .....................63, 64, 72 1 Z AE lock......................................94, 232 Before You Begin Choosing a Display Mode Press the VIEW MODE button to cycle through the following display modes: 1 • E EYE SENSOR: Putting your eye to the viewfinder turns the viewfinder on and the LCD monitor off ; taking your eye away turns the viewfinder off and LCD monitor on. • EVF ONLY: Viewfinder on, LCD monitor off. • LCD ONLY: LCD monitor on, viewfinder off. • EVF ONLY + E: Putting your eye to the viewfinder turns the viewfinder on; taking it away turns the viewfinder off. The LCD monitor remains off. • E EYE SENSOR + LCD IMAGE DISP.: Putting your eye to the viewfinder during shooting turns the viewfinder on, but the LCD monitor is used for the display of images immediately after shooting. The Eye Sensor The eye sensor may respond to objects other than your eye or to light shining directly on the sensor. Eye sensor 16 Camera Displays Display Rotation When ON is selected for D SCREEN SET-UP > AUTOROTATE DISPLAYS, the indicators in the viewfinder and LCD monitor automatically rotate to match camera orientation. 17 Before You Begin Adjusting Display Brightness The brightness and hue of the viewfinder and LCD monitor can be adjusted using the items in the D SCREEN SET-UP menu. Choose EVF BRIGHTNESS or EVF COLOR to adjust viewfinder brightness or hue, 1 LCD BRIGHTNESS or LCD COLOR to do the same for the LCD monitor. The DISP/BACK Button The DISP/BACK button controls the display of indicators in the viewfinder and LCD monitor. 1 Before You Begin Viewfinder Full screen Standard Dual display (manual focus mode only) 18 Camera Displays LCD Monitor Standard Information off 1 Before You Begin Dual display (manual focus mode only) Info display The Dual Display The dual display consists of a large full-frame window and a smaller close-up of the focus area. N The content of the large and small windows in the display can be switched using D SCREEN SET-UP > DUAL DISPLAY SETTING. 19 Customizing the Standard Display To choose the items shown in the standard display: 1 Display standard indicators. Press the DISP/BACK button until standard indicators are displayed. 2 Select DISP. CUSTOM SETTING. Select D SCREEN SET-UP > DISP. CUSTOM SETTING in the setup menu. 3 Choose items. Highlight items and press MENU/OK to select or deselect. 1 Before You Begin • FRAMING GUIDELINE • ELECTRONIC LEVEL • FOCUS FRAME • AF DISTANCE INDICATOR • MF DISTANCE INDICATOR • HISTOGRAM • SHOOTING MODE • APERTURE/S-SPEED/ISO • INFORMATION BACKGROUND • Expo. Comp. (Digit) • Expo. Comp. (Scale) • FOCUS MODE • PHOTOMETRY 20 • SHUTTER TYPE • FLASH • CONTINUOUS MODE • DUAL IS MODE • WHITE BALANCE • FILM SIMULATION • DYNAMIC RANGE • BOOST MODE • FRAMES REMAINING • IMAGE SIZE/QUALITY • MOVIE MODE & REC. TIME • MIC LEVEL • BATTERY LEVEL • FRAMING OUTLINE Camera Displays 4 Save changes. Press DISP/BACK to save changes. 5 Exit the menus. Press DISP/BACK as needed to exit the menus and return to the shooting display. 1 Before You Begin Virtual Horizon Selecting ELECTRONIC LEVEL displays a virtual horizon. The camera is level when the two lines overlap. Note that the virtual horizon may not be displayed if the camera lens is pointed up or down. Framing Outline Enable FRAMING OUTLINE to make the borders of the frame easier to see against dark backgrounds. 21 Camera Displays Histograms Histograms show the distribution of tones in the image. Brightness is shown by the horizontal axis, the number of pixels by the vertical axis. Number of pixels 1 Before You Begin Shadows • Optimal exposure: Highlights Pixel brightness Pixels are distributed in an even curve throughout the tone range. • Overexposed: Pixels are clustered on the right side of the graph. • Underexposed: Pixels are clustered on the left side of the graph. 22 Using the Menus To display the menus, press MENU/OK. Shooting Playback IMAGE QUALITY SETTING PLAY BACK MENU SWITCH SLOT RAW CONVERSION ERASE CROP RESIZE PROTECT IMAGE ROTATE RED EYE REMOVA EXIT 1 Before You Begin IMAGE SIZE IMAGE QUALITY RAW RECORDING FILM SIMULATION GRAIN EFFECT DYNAMIC RANGE WHITE BALANCE HIGHLIGHT TONE EXIT To navigate the menus: 1 Press MENU/OK to display the menus. 2 Press the selector left to highlight the tab for the current menu. IMAGE QUALITY SETTING IMAGE SIZE IMAGE QUALITY RAW RECORDING FILM SIMULATION GRAIN EFFECT DYNAMIC RANGE WHITE BALANCE HIGHLIGHT TONE EXIT IMAGE QUALITY SETTING IMAGE SIZE IMAGE QUALITY RAW RECORDING FILM SIMULATION GRAIN EFFECT DYNAMIC RANGE WHITE BALANCE HIGHLIGHT TONE EXIT Tab 23 Using the Menus 1 3 Press the selector up or down to highlight the tab (H, G, A, F, B, E, C or D) containing the desired item. 4 Press the selector right to place the cursor in the menu. Before You Begin N Use the front command dial to scroll through the menus a page at a time. 24 First Steps 25 Attaching the Strap Attach the strap clips to the camera and then attach the strap. 1 Open a strap clip. Use the clip attaching tool to open a strap clip, making sure that the tool and clip are in the orientations shown. 2 Place the strap clip on an eyelet. Hook the strap eyelet in the clip opening. Remove the tool, using the other hand to keep the clip in place. 2 First Steps O Keep the tool in a safe place, as you will need it to open the strap clips when removing the strap. 26 Attaching the Strap 4 Attach a protective cover. Place a protective cover over the eyelet as shown, with the black side of the cover toward the camera. 5 Fasten the strap. Insert the strap through a protective cover and strap clip and fasten as shown. 2 First Steps 3 Pass the clip through the eyelet. Rotate the clip fully through the eyelet until it clicks closed. O To avoid dropping the camera, be sure the strap is correctly secured. Repeat Steps 1–5 for the second eyelet. 27 Attaching a Lens The camera can be used with lenses for the FUJIFILM X-mount. First Steps Remove the body cap from the camera and the rear cap from the 2 lens. Place the lens on mount, keeping the marks on the lens and camera aligned, and then rotate the lens until it clicks into place. O When attaching lenses, ensure that dust or other foreign matter does not enter the camera and be careful not to touch the camera’s internal parts. Do not press the lens release button while attaching the lens and be sure the latch has securely clicked into place. 28 Attaching a Lens Removing Lenses To remove the lens, turn the camera off, then press the lens release button and rotate the lens as shown. O To prevent dust accumulating on the lens or inside the camera, replace the lens caps and camera body cap when the lens is not attached. 2 29 First Steps Lenses and Other Optional Accessories The camera can be used with lenses and accessories for the FUJIFILM X-mount. Charging the Battery The battery is not charged at shipment. Before use, charge the battery in the supplied battery charger. O An NP-W126S rechargeable battery is supplied with the camera; optional lower-capacity NP-W126 batteries can also be used. Charging takes about 150 minutes. 2 First Steps 1 Place the battery in the charger. Place the battery in the supplied battery charger as shown. 2 Plug the charger in. Plug the charger into an indoor power outlet. The charging indicator will light. 3 Charge the battery. Remove the battery when charging is complete. 30 Charging the Battery The Charging Indicator The charging indicator shows battery charge status as follows: Charging indicator Blinks Battery fault. Off Action Insert the battery. 2 Remove the battery. — Unplug the charger and remove the battery. 31 First Steps On Battery status Battery not inserted. Battery fully charged. Battery charging. O The supplied AC cord is for use exclusively with the supplied battery charger. Do not use the supplied charger with other cords or the supplied cord with other devices. Do not affix labels or other objects to the battery. Failure to observe this precaution could make it impossible to remove the battery from the camera. 2 First Steps Do not short the battery terminals. The battery could overheat. Read the cautions in “The Battery and Power Supply”. Use only battery chargers designated for use with the battery. Failure to observe this precaution could result in product malfunction. Do not remove the labels from the battery or attempt to split or peel the outer casing. The battery gradually loses its charge when not in use. Charge the battery one or two days before use. If the battery fails to hold a charge, it has reached the end of its charging life and must be replaced. Unplug the charger when it is not in use. Remove dirt from the battery terminals with a clean, dry cloth. Failure to observe this precaution could prevent the battery from charging. Note that charging times increase at low temperatures. 32 Charging the Battery Charging via Computer The battery also charges if the camera is connected to a computer. Turn the camera off, insert the battery, and connect a USB cable as shown, making sure the connectors are fully inserted. The charging time of about 300 minutes is not affected by the type of cable used. 2 First Steps Micro USB (Micro-B) USB 3.0 Micro USB (Micro-B) USB 2.0 Charging status is shown by the indicator lamp. Indicator lamp Battery status On Battery charging Off Charging complete Blinks Battery fault Connect the camera directly to the computer; do not use a USB hub or keyboard. Charging stops if the computer enters sleep mode; to resume charging, activate the computer and disconnect and reconnect the USB cable. Charging may not be supported depending on the model of computer, computer settings, and the computer’s current state. 33 Inserting the Battery After charging the battery, insert the battery in the camera as described below. 1 2 First Steps Open the battery-chamber cover. Slide the battery-chamber latch as shown and open the battery-chamber cover. O Do not open the battery-cham- ber cover when the camera is on. Failure to observe this precaution could damage image files or memory cards. Do not use excessive force when handling the battery-chamber cover. 34 Inserting the Battery 2 Insert the battery. Using the battery to keep the battery latch pressed to one side, insert the battery contacts first in the direction shown by the arrow. Confirm that the battery is securely latched. 3 First Steps O 2 Insert the battery in the orientation shown. Do not use force or attempt to insert the battery upside down or backwards. The battery will slide in easily in the correct orientation. Close the battery-chamber cover. Close and latch the cover. O If the cover does not close, check that the battery is in the correct orientation. Do not attempt to force the cover shut. 35 Inserting the Battery Removing the Battery Before removing the battery, turn the camera off and open the battery-chamber cover. To remove the battery, press the battery latch to the side, and slide the battery out of the camera as shown. 2 First Steps O The battery may become hot when used in high-tempera- ture environments. Observe caution when removing the battery. 36 Inserting Memory Cards Pictures are stored on memory cards (sold separately). 1 Open the memory card slot cover. Unlatch and open the cover. 2 O Do 2 First Steps not open the memory card-slot cover when the camera is on. Failure to observe this precaution could damage image files or memory cards. Insert the memory card. Holding the card in the orientation shown, slide it in until it clicks into place at the back of the slot. O Be sure card is in the correct orientation; do not insert at an angle or use force. 3 Close the memory card slot cover. Close and latch the cover. 37 Removing Memory Cards Before removing memory cards, turn the camera off and open the memory card slot cover. 2 First Steps Press and release the card to eject it part way (to prevent the card falling from the slot, press the center of the card and release it slowly, without removing your finger from the card). The card can then be removed by hand. 38 Inserting Memory Cards Using Two Cards The camera can be used with two cards, one in each of its two slots. At default settings, photos are saved to the card in the second slot only when the card in the first slot is full. This can be changed using D SAVE DATA SET-UP > CARD SLOT SETTING (STILL IMAGE). Description Display The card in the second slot is used only when the card in the first slot is full. If the second slot is selected for D SAVE DATA SET-UP > SEQUENTIAL SWITCH SLOT (SEQUENTIAL), recording (default) will start on the card in the second slot and switch to the first slot when the card in the second slot is full. Each picture is recorded twice, once to each BACKUP card. As for SEQUENTIAL, except that the RAW copy of pictures taken with FINE + RAW or NORMAL + RAW selected for H IMAGE RAW/JPEG QUALITY SETTING > IMAGE QUALITY will be saved to the card in the first slot and the JPEG copy to the card in the second slot. The card used to store movies can be selected using D SAVE DATA SET-UP > MOVIE FILE DESTINATION. 39 2 First Steps Option First Steps Compatible Memory Cards FUJIFILM and SanDisk SD, SDHC, and SDXC memory cards have been approved for use in the camera; UHS-II cards can be used in both slots, while cards with a UHS speed class of 3 or better are recommended for movies. A complete list of approved memory cards is available 2 at http://www.fujifilm.com/support/digital_cameras/ compatibility/. Operation is not guaranteed with other cards. The camera can not be used with xD-Picture Cards or MultiMediaCard (MMC) devices. O Do not turn the camera off or remove the memory card while the memory card is being formatted or data are being recorded to or deleted from the card. Failure to observe this precaution could damage the card. Memory cards can be locked, making it impossible to format the card or to record or delete images. Before inserting a memory card, slide the write-protect switch to the unlocked position. 40 Inserting Memory Cards O Format memory cards before first use, and be sure to reformat all memory cards after using them in a computer or other device. Memory cards are small and can be swallowed; keep out of reach of children. If a child swallows a memory card, seek medical assistance immediately. Do not affix labels or other objects to memory cards. Peeling labels can cause camera malfunction. Movie recording may be interrupted with some types of memory card. Formatting a memory card in the camera creates a folder in which pictures are stored. Do not rename or delete this folder or use a computer or other device to edit, delete, or rename image files. Always use the camera to delete pictures; before editing or renaming files, copy them to a computer and edit or rename the copies, not the originals. Renaming the files on the camera can cause problems during playback. 41 2 First Steps miniSD or microSD adapters that are larger or smaller than memory cards may not eject normally; if the card does not eject, take the camera to an authorized service representative. Do not forcibly remove the card. Turning the Camera On and Off Use the ON/OFF switch to turn the camera on and off. Rotate the switch to ON to turn the camera on, or to OFF to turn the 2 camera off. First Steps O Fingerprints and other marks on the lens or viewfinder can affect pictures or the view through the viewfinder. Keep the lens and viewfinder clean. N Press the a button to start playback. Press the shutter button halfway to return to shooting mode. The camera will turn off automatically if no operations are performed for the length of time selected for D POWER MANAGEMENT > AUTO POWER OFF. To reactivate the camera after it has turned off automatically, press the shutter button halfway or turn the ON/OFF switch to OFF and then back to ON. 42 Checking the Battery Level After turning the camera on, check the battery level in the display. Battery level is shown as follows: Description Battery partially discharged. Battery about 80% full. Battery about 60% full. Battery about 40% full. Battery about 20% full. Low battery. Charge as soon as possible. Battery exhausted. Turn camera off and recharge battery. 2 First Steps Indicator e f g h i i (red) j (blinks red) 43 Basic Setup A language-selection dialog is displayed the first time the camera is turned on. 1 Turn the camera on. A language-selection dialog will be displayed. 2 Choose a language. Highlight a language and press MENU/OK. 3 Set the date and time. Press the selector left or right to highlight the year, month, day, hour, or minute and press up or down to change. To change the order in which the year, month, and day are displayed, highlight the date format and press the selector up or down. Press MENU/OK to exit to shooting mode when settings are complete. 2 First Steps DATE/TIME NOT SET 2018 Y Y .MM.DD 2017 2016 2015 2014 AM SET 44 NO Basic Setup N If the battery is removed for an extended period, the camera clock will be reset and the language-selection dialog will be displayed when the camera is turned on. Skipping the Current Step Press DISP/BACK to skip the current step. Any steps you skip will be displayed the next time the camera is turned on. 2 First Steps 45 Basic Setup Choosing a Different Language To change the language: 2 1 Display language options. Select D USER SETTING > a. 2 Choose a language. Highlight the desired option and press MENU/OK. First Steps Changing the Time and Date To set the camera clock: 1 Display DATE/TIME options. Select D USER SETTING > DATE/TIME. 2 Set the clock. Press the selector left or right to highlight the year, month, day, hour, or minute and press up or down to change. Press MENU/OK to set the clock. 46 Basic Photography and Playback 47 Taking Photographs (Mode P) This section describes how to take pictures using program AE (mode P). See pages 62–73 for information on S, A, and M modes. 1 Adjust settings for program AE. A B F C E D 3 Basic Photography and Playback A Shutter speed (P 62): Select A (auto). B Sensitivity (P 88): Select A (auto). C Drive mode (P 5): Select S (single frame). D Focus mode (P 75): Select S (single AF). E Aperture (P 62): Select A (auto). F Metering (P 91): Select o (multi). N To use the shutter speed dial, press the dial lock release and rotate the dial to the desired setting. 48 Taking Photographs (Mode P) 2 Check the shooting mode. Confirm that P appears in the display. 3 Ready the camera. Hold the camera steady with both hands and brace your elbows against your sides. Shaking or unsteady hands can blur your shots. 3 Basic Photography and Playback To prevent pictures that are out of focus or too dark (underexposed), keep your fingers and other objects away from the lens and AF-assist illuminator. 4 Frame the picture. Lenses with Zoom Rings Use the zoom ring to frame the picture in the display. Rotate the ring left to zoom out, right to zoom in. A 49 Taking Photographs (Mode P) 5 Focus. Press the shutter button halfway to focus. N If the subject is poorly lit, the AF-assist illuminator may light. Focus indicator Focus frame If the camera is able to focus, it will beep twice and focus area and focus indicator will glow green. Focus and exposure will lock while the shutter button is pressed halfway. 3 Basic Photography and Playback If the camera is unable to focus, the focus frame will turn red, s will be displayed, and the focus indicator will blink white. 6 50 Shoot. Smoothly press the shutter button the rest of the way down to take the picture. a Viewing Pictures Pictures can be viewed in the viewfinder or LCD monitor. To view pictures full frame, press a. 100-0001 3 N Pictures taken using other cameras are marked with a m (“gift image”) icon to warn that they may not display correctly and that playback zoom may not be available. Two Memory Cards If two memory cards are inserted, you can press and hold the a button to choose a card for playback. You can also select a card using the C PLAY BACK MENU > SWITCH SLOT option. 51 Basic Photography and Playback Additional pictures can be viewed by pressing the selector left or right or rotating the front command dial. Press the selector or rotate the dial right to view pictures in the order recorded, left to view pictures in reverse order. Keep the selector pressed to scroll rapidly to the desired frame. b Deleting Pictures Use the b button to delete pictures. O Deleted pictures can not be recovered. Copy important pictures to a computer or other storage device before proceeding. 1 3 With a picture displayed full frame, press the b button and select FRAME. Basic Photography and Playback ERASE FRAME SELECTED FRAMES ALL FRAMES 2 Press the selector left or right to scroll through pictures and press MENU/OK to delete (a confirmation dialog is not displayed). Repeat to delete additional pictures. N Protected pictures can not be deleted. Remove protection from any pictures you wish to delete (P 187). Pictures can also be deleted from the menus using the C PLAY BACK MENU > ERASE option (P 182). 52 Movie Recording and Playback 53 F Recording Movies This section describes how to film movies in auto mode. 1 Rotate the drive dial to F. 2 Adjust settings for program AE. 4 Movie Recording and Playback A B E D A Shutter speed (P 62): Select A (auto). B Sensitivity (P 88): Select A (auto). C Focus mode (P 75): Select S (single AF). D Aperture (P 62): Select A (auto). E Metering (P 91): Select o (multi). 54 C Recording Movies 3 Press the shutter button to start recording. A recording indicator (V) and the time remaining are displayed while recording is in progress. 4 Press the button again to end recording. Recording ends automatically when the maximum length is reached or the memory card is full. Using an External Microphone Sound can be recorded with external microphones that connect using jacks 3.5 mm in diameter; microphones that require bus power can not be used. See the microphone manual for details. 4 Movie Recording and Playback 55 O Sound is recorded via the built-in microphone or an optional external microphone. Do not cover the microphone during recording. Note that the microphone may pick up lens noise and other sounds made by the camera during recording. Vertical or horizontal streaks may appear in movies containing very bright subjects. This is normal and does not indicate a malfunction. N The indicator lamp lights while recording is in progress. During recording, you can change exposure compensation by up to ±2 EV and adjust zoom using the zoom ring on the lens (if available). 4 Movie Recording and Playback If the lens is equipped with an aperture mode switch, select the aperture mode before beginning recording. If an option other than A is selected, shutter speed and aperture can be adjusted while recording is in progress. While recording is in progress, you can: • Adjust sensitivity • Use the VIEW MODE button and the eye sensor to switch between the EVF and LCD monitor displays • Refocus using autofocus by pressing the shutter button halfway or by pressing the button to which AF-ON has been assigned Recording may be unavailable at some settings, while in other cases settings may not apply during recording. 56 Recording Movies Adjusting Movie Settings Frame size and rate can be selected using B MOVIE SETTING > MOVIE MODE, while the card used to store movies can be selected using D SAVE DATA SET-UP > MOVIE FILE DESTINATION. Focus mode is selected using the focus mode selector; for continuous focus adjustment, select C, or choose S and enable Intelligent Face Detection. Intelligent Face Detection is not available in focus mode M. 4 Movie Recording and Playback Depth of Field Choose low f-numbers to soften background details. 57 a Viewing Movies View movies on the camera. In full-frame playback, movies are identified by a W icon. 12/31/2050 10:00 AM PLAY ±0 The following operations can be performed while a movie is displayed: 4 Movie Recording and Playback Playback in Playback Selector progress ((x x) paused (y (y) End playback e Start/resume Pause playback f playback Single frame Adjust speed gh rewind/advance 29m59s Progress is shown in the display during playback. O Do not cover the speaker during playback. 58 STOP PAUSE Viewing Movies N Press MENU/OK to pause playback and display volume controls. Press the selector up or down to adjust the volume; press MENU/OK again to resume playback. Volume can also be adjusted using D SOUND SET-UP > PLAYBACK VOLUME. Playback Speed Press the selector left or right to adjust playback speed during playback. Speed is shown by the number of arrows (M or N). 29m59s STOP 4 PAUSE Movie Recording and Playback Arrows 59 MEMO 60 Taking Photographs 61 P, S, A, and M Modes P, S, A, and M modes give you varying degrees of control over shutter speed and aperture. Mode P: Program AE Let the camera choose shutter speed and aperture for optimal exposure. Other values that produce the same exposure can be selected with program shift. 5 Taking Photographs Shutter speed: Select A (auto). Aperture: Select A (auto). Set shutter speed and aperture to A (auto) and confirm that P appears in the display. O If the subject is outside the metering range of the cam- era, the shutter speed and aperture displays will show “– – –”. N To use the shutter speed dial, press the dial lock release and rotate the dial to the desired setting. 62 P, S, A, and M Modes Program Shift If desired, you can rotate the rear command dial to select other combinations of shutter speed and aperture without altering exposure (program shift). Shutter speed Aperture O Program shift is not available during movie recording or if the flash supports TTL auto or an auto option is selected for H IMAGE QUALITY SETTING > DYNAMIC RANGE. N To cancel program shift, turn the camera off. 5 Taking Photographs 63 Mode S: Shutter-Priority AE Choose a shutter speed and let the camera adjust aperture for optimal exposure. Shutter speed: Choose a speed. Aperture: Select A (auto). Taking Photographs Set aperture to A (auto) and use the shutter speed dial to choose a 5 shutter speed. S will appear in the display. O If the correct exposure can not be achieved at the selected shutter speed, aperture will be displayed in red. If the subject is outside the metering range of the camera, the aperture display will show “– – –”. N To use the shutter speed dial, press the dial lock release and rotate the dial to the desired setting (the dial can be used even while the shutter button is pressed halfway). Shutter speed can also be adjusted in increments of 1⁄3 EV by rotating the rear command dial. 64 P, S, A, and M Modes Sensitivity and Depth of Field If you choose a fast shutter speed when the subject is poorly lit, the camera autoexposure program will select a wider aperture. This will produce the correct exposure but may also reduce depth of field so that less of the area behind and in front of your subject appears to be in focus. To stop aperture down and increase depth of field, select a higher sensitivity. 5 Taking Photographs 65 Time (T) Rotate the shutter speed dial to T (time) to choose slow shutter speeds for long time-exposures. Use of a tripod is recommended to prevent the camera moving during the exposure. 5 Taking Photographs 1 Rotate the shutter speed dial to T. 2 Rotate the rear command dial to choose a shutter speed. 3 Press the shutter button all the way down to take a picture at the selected shutter speed. A countdown timer will be displayed while the exposure is in progress. N To reduce “noise” (mottling) in long time-exposures, select ON for H IMAGE QUALITY SETTING > LONG EXPOSURE NR. Note that this may increase the time needed to record images after shooting. 66 P, S, A, and M Modes Bulb (B) Select a shutter speed of B (bulb) for long time-exposures in which you open and close the shutter manually. Use of a tripod is recommended to prevent the camera moving during the exposure. Rotate the shutter speed dial to B. 2 Press the shutter button all the way down. The shutter will remain open for up to 60 minutes 5 while the shutter button is pressed; the display shows the time elapsed since the exposure started. N Selecting an aperture of A fixes shutter speed at 30 s. To reduce “noise” (mottling) in long time-exposures, select ON for H IMAGE QUALITY SETTING > LONG EXPOSURE NR. Note that this may increase the time needed to record images after shooting. 67 Taking Photographs 1 Using a Remote Release An optional RR-90 remote release can be used for long time-exposures. The RR-90 connects via the Micro USB (Micro-B) USB 2.0 connector. Alternatively, electronic releases from third-party suppliers can be connected via the remote release connector. Use releases with a ⌀2.5 mm connector. Third-party mechanical releases connect 5 as shown. Taking Photographs 68 P, S, A, and M Modes Mode A: Aperture-Priority AE Choose an aperture and let the camera adjust shutter speed for optimal exposure. Shutter speed: Select A (auto). Aperture: Select Z (manual). 5 O If the correct exposure can not be achieved at the selected aperture, shutter speed will be displayed in red. If the subject is outside the metering range of the camera, the shutter speed display will show “– – –”. N To use the shutter speed dial, press the dial lock release and rotate the dial to the desired setting. Aperture can be adjusted even while the shutter button is pressed halfway. 69 Taking Photographs Rotate the shutter speed dial to A (auto), set aperture to Z, and rotate the lens aperture ring to adjust aperture as desired. A will appear in the display. Previewing Depth of Field When PREVIEW DEPTH OF FIELD is assigned to a function button, pressing the button stops aperture down to the selected setting, allowing depth of field to be previewed in the display. N Depth of field can also be previewed using the depth-of-field indicator in the standard display. Press DISP/BACK to cycle through display modes until standard indicators are displayed. Depth of field Use the G AF/MF SETTING > DEPTH-OF-FIELD SCALE option to choose how depth of field is displayed. Choose FILM FORMAT BASIS to help you make practical assessments of depth of field for pictures that will be viewed as prints and the like, PIXEL BASIS to help you assess depth of field for pictures that will be viewed at high resolutions on computers or other electronic displays. 5 Taking Photographs 70 P, S, A, and M Modes Sensitivity and Motion Blur If you choose a narrow aperture when the subject is poorly lit, the shutter speed selected by the autoexposure program may not be fast enough to prevent motion blur. For faster shutter speeds that reduce motion blur, select a higher sensitivity. 5 Taking Photographs 71 Mode M: Manual Exposure Alter exposure from that selected by the camera. Shutter speed: Choose a speed. Aperture: Select Z (manual). Taking Photographs Set shutter speed to a value other than A, set aperture to Z, and rotate the lens aperture ring to 5 choose the aperture. M will appear in the display. 㹋 N To use the shutter speed dial, press the dial lock release and rotate the dial to the desired setting. Shutter speed can be adjusted in increments of 1⁄3 EV by rotating the rear command dial. 72 P, S, A, and M Modes Exposure Preview To preview exposure in the LCD monitor, select an option other than OFF for D SCREEN SET-UP > PREVIEW EXP./ WB IN MANUAL MODE. Select OFF when using the flash or on other occasions on which exposure may change when the picture is taken. 5 Taking Photographs 73 Autofocus Take pictures using autofocus. 5 Taking Photographs 1 Rotate the focus mode selector to S or C (P 75). 2 Use G AF/MF SETTING > AF MODE to choose an AF mode (P 77). 3 Choose the position and size of the focus frame (P 79). 4 Take pictures. N For information on the autofocus system, visit: http://fujifilm-x.com/af/en/index.html 74 Autofocus Focus Mode Use the focus mode selector to choose how the camera focuses. Choose from the following options: Mode Description Single AF: Focus locks while the shutter button is pressed (AF-S) halfway. Choose for stationary subjects. Continuous AF: Focus is continually adjusted to reflect C changes in the distance to the subject while the shutter (AF-C) button is pressed halfway. Use for subjects that are in motion. Eye-detection AF is not available. Manual: Focus manually using the lens focus ring. Choose M for manual control of focus or in situations in which the (manual) camera is unable to focus using autofocus (P 84). S used when the lens is in manual focus mode. If ON is selected for G AF/MF SETTING > PRE-AF, focus will be adjusted continuously in modes S and C even when the shutter button is not pressed. 75 Taking Photographs N Regardless of the option selected, manual focus will be 5 The Focus Indicator The focus indicator turns green when the subject is in focus and blinks white when the camera is unable to focus. Brackets (“( )”) indicate that the camera is focusing and are displayed continu- Focus indicator ously in mode C. j is displayed in manual focus mode. 5 Taking Photographs 76 Autofocus Autofocus Options (AF Mode) Choose how the camera focuses in modes S and C. 1 2 3 Press MENU/OK and go to the shooting menu. Select G AF/MF SETTING > AF MODE. Choose an AF mode. N This feature can also be accessed via shortcuts (P 250). How the camera focuses depends on the focus mode. Focus Mode S (AF-S) Description 5 Sample image Taking Photographs Option r Camera focuses on subject in seSINGLE lected focus point. Use for pinPOINT point focus on selected subject. Camera focuses on subject in selected focus zone. Focus zones include ZONE multiple focus points, making it easier to focus on subjects in motion. y z Camera focuses automatically on WIDE/ high-contrast subjects; display TRACKING shows areas in focus. 77 Option j ALL Description Sample image Rotate the rear command dial in the focus-point selection display (P 80, 81) to cycle through AF modes in the following order: r SINGLE POINT, y ZONE, and z WIDE/TRACKING. Focus Mode C (AF-C) Option Description Sample image r Focus tracks subject at selected foSINGLE cus point. Use for subjects moving POINT toward or away from camera. 5 Taking Photographs Focus tracks subject in selected focus zone. Use for subjects that are ZONE moving fairly predictably. y z Focus tracks subjects moving WIDE/ through wide area of frame. TRACKING j ALL 78 Rotate the rear command dial in the focus-point selection display (P 80, 81) to cycle through AF modes in the following order: r SINGLE POINT, y ZONE, and z WIDE/TRACKING. Autofocus Focus-Point Selection Choose a focus point for autofocus. Viewing the Focus-Point Display 1 2 3 Press MENU/OK and go to the shooting menu. Select G AF/MF SETTING > FOCUS AREA to view the focus-point display. Use the focus stick and rear command dial to choose a focus area (P 80). 5 Taking Photographs 79 Selecting a Focus Point Use the focus stick (focus lever) to choose the focus point and the rear command dial to choose the size of the focus frame. The procedure varies with the option selected for AF mode. Focus stick AF mode 5 Taking Photographs r y z Tilt Rear command dial Press Rotate Press Choose from 6 frame sizes Restore original Select focus Select center size Choose from 3 point focus point frame sizes — N Manual focus-point selection is not available when z WIDE/TRACKING is selected in focus mode S. If j ALL is selected for AF mode, you can rotate the rear command dial in the focus-point selection display (P 80, 81) to cycle through AF modes in the following order: r SINGLE POINT (6 frame sizes), y ZONE (3 frame sizes), and either z WIDE (focus mode S) or z TRACKING (focus mode C). 80 Autofocus The Focus-Point Display The focus-point display varies with the option selected for AF mode. N Focus frames are shown by small squares (), focus zones by the large squares. r SINGLE POINT AF mode y ZONE z WIDE/TRACKING Available Focus Points TTL contrast-detect AF offers more focus points (A) than intelligent hybrid AF (B), which combines phase-detection with TTL contrast-detect AF. A B 81 5 Taking Photographs Number of points Choose from zones Position focus frame available can be select- with 7 × 7, 5 × 5, or over subject and press ed using G AF/MF 3 × 3 focus points. MENU/OK. SETTING > NUMBER OF FOCUS POINTS. Burst Mode Focus-Frame Selection When continuous high-speed (CH) is selected for drive mode, the number of focus frames available in focus mode C drops. Single point 5 Zone Wide/tracking Taking Photographs Autofocus Although the camera boasts a high-precision autofocus system, it may be unable to focus on the subjects listed below. • Very shiny subjects such as mirrors or car bodies. • Subjects photographed through a window or other reflective object. • Dark subjects and subjects that absorb rather than reflect light, such as hair or fur. • Insubstantial subjects, such as smoke or flame. • Subjects that show little contrast with the background. • Subjects positioned in front of or behind a high-contrast object that is also in the focus frame (for example, a subject photographed against a backdrop of highly contrasting elements). 82 Autofocus Checking Focus To zoom in on the current focus area for precise focus, press the control to which focus zoom has been assigned (at default settings, the center of the rear command dial). Press the control again to cancel zoom. M M Normal display Focus zoom rear command dial when STANDARD or FOCUS PEAK HIGHLIGHT is selected for G AF/MF SETTING > MF ASSIST (P 146). Focus zoom is not available in focus mode C or when G AF/MF SETTING > PRE-AF is on or an option other than r SINGLE POINT is selected for AF MODE. Use D BUTTON/DIAL SETTING > Fn/AE-L/AF-L BUTTON SETTING to change the function performed by the center of the command dial or assign its default function to other controls. 83 5 Taking Photographs N In focus mode S, zoom can be adjusted by rotating the Manual Focus Adjust focus manually. 1 Rotate the focus mode selector to M. j will appear in the display. 5 㹋 Taking Photographs 2 3 Focus manually using the lens focus ring. Rotate the ring left to reduce the focus distance, right to increase. A Take pictures. N Use D BUTTON/DIAL SETTING > FOCUS RING to reverse the direction of rotation of the focus ring. Regardless of the option selected, manual focus will be used when the lens is in manual focus mode. 84 Manual Focus Quick Focus To use autofocus to focus on the subject in the selected focus area, press the button to which focus lock or AF-ON has been assigned (the size of the focus area can be chosen with the rear command dial). In manual focus mode, you can use this feature to quickly focus on a chosen subject using either single or continuous AF according to the option chosen for G AF/MF SETTING > INSTANT AF SETTING. 5 Taking Photographs 85 Checking Focus A variety of options are available for checking focus in manual focus mode. Taking Photographs The Manual Focus Indicator The manual focus indicator indi- Focus distance (white line) cates how closely the focus distance matches the distance to the subject in the focus brackets. The white line indicates the distance to the subject Depth of field in the focus area (in meters or feet ac5 cording to the option selected for D SCREEN SET-UP > FOCUS SCALE UNITS in the setup menu), the blue bar the depth of field, or in other words the distance in front of and behind the subject that appears to be in focus. Focus Zoom If ON is selected for G AF/MF SETTING > FOCUS CHECK, the camera will automatically zoom in on the selected focus area when the focus ring is rotated. N If STANDARD or FOCUS PEAK HIGHLIGHT is select- ed for G AF/MF SETTING > MF ASSIST, zoom can be adjusted by rotating the rear command dial. Focus area selection using the focus stick is available during focus zoom. 86 Manual Focus MF Assist The G AF/MF SETTING > MF ASSIST option can be used to check focus when pictures are framed in the LCD monitor or electronic viewfinder in manual focus mode. N The MF ASSIST menu can be displayed by pressing and holding the control to which focus zoom has been assigned. The following options are available: • FOCUS PEAK HIGHLIGHT: Highlights high-contrast outlines. Rotate the focus ring until the subject is highlighted. 5 Taking Photographs • DIGITAL SPLIT IMAGE: Displays a split image in the center of the frame. Frame the subject in the split-image area and rotate the focus ring until the four parts of the split image are correctly aligned. 87 N Sensitivity Adjust the camera’s sensitivity to light. Press the sensitivity dial lock release, rotate the dial to the desired setting, and press the release again to lock the dial in place. Option 5 Taking Photographs Description Sensitivity is automatically adjusted in response to shooting conditions according to option chosen for A (auto) A SHOOTING SETTING > ISO AUTO SETTING. Choose from AUTO1, AUTO2, and AUTO3. Adjust sensitivity manually. Selected value is shown 12800–200 in display. Choose for special situations. Note that mottling H (25600/51200), may appear in pictures taken at H, while L reduces L (100/125/160) dynamic range. N Use D BUTTON/DIAL SETTING > ISO DIAL SETTING (H) to choose the sensitivity assigned to the H position. Use D BUTTON/DIAL SETTING > ISO DIAL SETTING (L) to choose the sensitivity assigned to the L position. If COMMAND is selected for D BUTTON/DIAL SETTING > ISO DIAL SETTING (A), sensitivity can also be adjusted by setting sensitivity to A and rotating the front command dial. 88 Sensitivity Adjusting Sensitivity High values can be used to reduce blur when lighting is poor, while lower values allow slower shutter speeds or wider apertures in bright light; note, however, that mottling may appear in pictures taken at high sensitivities. Auto Sensitivity (A) Use A SHOOTING SETTING > ISO AUTO SETTING to choose the base sensitivity, maximum sensitivity, and minimum shutter speed for the A position on the sensitivity dial. Settings for AUTO1, AUTO2, and AUTO3 can be stored separately. 5 Default AUTO1 AUTO2 AUTO3 200 800 1600 3200 ⁄ SEC The camera automatically chooses a sensitivity between the default and maximum values; sensitivity is only raised above the default value if the shutter speed required for optimal exposure would be slower than the value selected for MIN. SHUTTER SPEED. 89 Taking Photographs Item Options DEFAULT SENSITIVITY 12800–200 MAX. SENSITIVITY 12800–400 MIN. SHUTTER SPEED ⁄–¼ SEC, AUTO Sensitivity N If the value selected for DEFAULT SENSITIVITY is higher than that selected for MAX. SENSITIVITY, DEFAULT SENSITIVITY will be set to the value selected for MAX. SENSITIVITY. The camera may select shutter speeds slower than MIN. SHUTTER SPEED if pictures would still be underexposed at the value selected for MAX. SENSITIVITY. If AUTO is selected for MIN. SHUTTER SPEED, the camera will automatically choose a minimum shutter speed approximately equal to the inverse of the lens’ focal length, in seconds (for example, if the lens has a focal length of 50 mm, the camera will choose a minimum shutter speed in the neighborhood of 1⁄50 s). The minimum shutter speed is not affected by the option selected for image stabilization. 5 Taking Photographs 90 C Metering Choose how the camera meters exposure. Rotate the metering dial to select from the options below. O The selected option will only take effect when G AF/MF SETTING > FACE/EYE DETECTION SETTING is FACE OFF/EYE OFF. Mode (spot) p The camera meters the entire frame but assigns the (centergreatest weight to the area at the center. weighted) The camera instantly determines exposure based on an o analysis of composition, color, and brightness distribu(multi) tion. Recommended in most situations. Exposure is set to the average for the entire frame. Prow vides consistent exposure across multiple shots with the (average) same lighting, and is particularly effective for landscapes and portraits of subjects dressed in black or white. 91 5 Taking Photographs v Description The camera meters lighting conditions in an area at the center of the frame equivalent to 2% of the total. Recommended with backlit subjects and in other cases in which the background is much brighter or darker than the main subject. d Exposure Compensation Adjust exposure. Rotate the exposure compensation dial. O The amount of compensation available varies with the shooting mode. Taking Photographs C (Custom) When the exposure compensation dial is rotated to C, exposure com5 pensation can be adjusted by rotating the front command dial. set N The front command dial can be used to set exposure compensation to values between −5 and +5 EV. The front command dial can be used to set aperture or exposure compensation. Press the dial to toggle between the two. 92 Focus/Exposure Lock Compose photographs with off-center subjects. 1 2 Focus: Position the subject in the focus frame and press the shutter button halfway to lock focus and exposure. Focus and exposure will remain locked while the shutter button is pressed halfway (AF/AE lock). P Recompose: Keep the shutter button pressed halfway. 5 3 Shoot: Press the button all the way down. N Focus lock using the shutter button is only available when ON is selected for D BUTTON/DIAL SETTING > SHUTTER AF, SHUTTER AE. 93 Taking Photographs P Focus/Exposure Lock The AF-L and AE-L Buttons Focus and exposure can also be locked with the AF-L and AE-L buttons. At default settings, the AF-L button locks focus, the AE-L button exposure. Focus and/or exposure will remain locked while the button is pressed, whether or not the shutter button is pressed halfway. Taking Photographs The roles of the buttons can be changed using the following D BUTTON/DIAL SETTING options: 5 • Fn/AE-L/AF-L BUTTON SETTING: Choose the roles played by the AE-L and AF-L buttons. • AE/AF-LOCK MODE: If AE&AF ON/OFF SWITCH is selected for AE/AF-LOCK MODE, focus and/or exposure lock when the button is pressed and remain locked until the button is pressed again. 94 BKT Bracketing Automatically vary settings over a series of pictures. Rotate the drive dial to BKT. 2 Navigate to DRIVE SETTING in the A SHOOTING 5 SETTING menu and select O AE BKT, W ISO BKT, X FILM SIMULATION BKT, H WHITE BALANCE BKT, or Y DYNAMIC RANGE BKT. N This feature can also be accessed via shortcuts (P 250). 3 Take photographs. 95 Taking Photographs 1 O AE BKT Use A SHOOTING SETTING > DRIVE SETTING > BKT SETTING > AE BKT to choose the bracketing amount and number of shots. Each time the shutter button is pressed, the camera will take the specified number of shots: one using the metered value for exposure and the others over- or under-exposed by multiples of the selected bracketing amount (P 150). N Regardless of the bracketing amount, exposure will not exceed the limits of the exposure metering system. 5 W ISO BKT Taking Photographs Select a bracketing amount (±1, ±2⁄3, or ±1⁄3). Each time the shutter is released, the camera will take a picture at the current sensitivity and process it to create two additional copies, one with sensitivity raised and the other with sensitivity lowered by the selected amount. X FILM SIMULATION BKT Each time the shutter is released, the camera takes one shot and processes it to create copies with different film simulation settings, chosen using A SHOOTING SETTING > DRIVE SETTING > BKT SETTING > FILM SIMULATION BKT. 96 Bracketing H WHITE BALANCE BKT Select a bracketing amount (±1, ±2, or ±3). Each time the shutter is released, the camera takes one shot and processes it to create three copies: one at the current white balanced setting, one with fine-tuning increased by the selected amount, and another with fine-tuning decreased by the selected amount. N While dynamic range bracketing is in effect, sensitivity will be restricted to a minimum of ISO 800 (or to a minimum of ISO 200 to 800 when an auto option is selected for sensitivity); the sensitivity previously in effect is restored when bracketing ends. 97 Taking Photographs Y DYNAMIC RANGE BKT Each time the shutter button is pressed, the camera takes three shots with different dynamic ranges: 100% for the first, 200% for the second, and 400% for 5 the third. I Continuous Shooting (Burst Mode) Capture motion in a series of pictures. 1 Rotate the drive dial to select CH (high-speed burst) or CL (low-speed burst). 2 Navigate to DRIVE SETTING in the A SHOOTING SETTING menu and choose a frame advance rate. 5 Taking Photographs N This feature can also be accessed via shortcuts (P 250). 3 98 Take photographs. The camera will take pictures while the shutter button is pressed; shooting ends when the shutter button is released or the memory card is full. Continuous Shooting (Burst Mode) O If file numbering reaches 999 before shooting is complete, the remaining pictures will be recorded to a new folder. Burst shooting may not begin if the space available on the memory card is insufficient. Frame rate varies with the subject, shutter speed, sensitivity, and focus mode. Frame rates may slow and recording times increase as more shots are taken. The flash may or may not fire, depending on shooting conditions. N Selecting CH in focus mode C restricts the choice of focus frames. Exposure and focus tracking performance may vary with such factors as aperture, sensitivity, and exposure compensation. 99 5 Taking Photographs Focus and Exposure Select focus mode C to vary focus with shot; to vary exposure with each shot, select OFF for D BUTTON/DIAL SETTING > SHUTTER AE. j Multiple Exposures Create a photograph that combines two exposures. 1 Rotate the drive dial to j. 2 3 Take the first shot. 5 Taking Photographs Press MENU/OK. The first shot will be shown superimposed on the view through the lens and you will be prompted to take the second shot. NEXT RETRY EXIT N To return to Step 2 and retake the first shot, press the selector left. To save the first shot and exit without creating a multiple exposure, press DISP/BACK. 100 Multiple Exposures 4 Take the second shot, using the first frame as a guide. EXIT 30 5 Press MENU/OK to create the multiple exposure, or press the selector left to return to Step 4 and retake the second shot. 2.0 RETRY EXIT 5 Taking Photographs 101 ADV. Advanced Filters Take photos with filter effects. 1 Rotate the drive dial to ADV.. 2 Navigate to DRIVE SETTING in the A SHOOTING SETTING menu and choose a filter effect. 5 Taking Photographs N This feature can also be accessed via shortcuts (P 250). 3 Take photographs. 102 Advanced Filters Advanced Filter Options Choose from the following filters: Filter G TOY CAMERA H MINIATURE I POP COLOR J HIGH-KEY Z LOW-KEY K DYNAMIC TONE u PARTIAL COLOR (RED) v PARTIAL COLOR (ORANGE) Areas of the image that are the selectw PARTIAL COLOR (YELLOW) ed color are recorded in that color. All x PARTIAL COLOR (GREEN) other areas of the image are recorded y PARTIAL COLOR (BLUE) in black-and-white. z PARTIAL COLOR (PURPLE) N Depending on the subject and camera settings, images may in some cases be grainy or vary in brightness or hue. 103 5 Taking Photographs X SOFT FOCUS Description Choose for a retro toy camera effect. The tops and bottoms of pictures are blurred for a diorama effect. Create high-contrast images with saturated colors. Create bright, low-contrast images. Create uniformly dark tones with few areas of emphasized highlights. Dynamic tone expression is used for a fantasy effect. Create a look that is evenly soft throughout the whole image. u Panoramas Follow an on-screen guide to create a panorama. 1 Rotate the drive dial to u. 2 To select the size of the angle through which you will pan the camera while shooting, press the selector left. Highlight a size and press MENU/OK. 3 Press the selector right to view a choice of pan directions. Highlight a pan direction and press MENU/OK. 4 Press the shutter button all the way down to start recording. There is no need to keep the shutter button pressed during recording. 5 Taking Photographs 104 Panoramas 5 Pan the camera in the direction shown by the arrow. Shooting ends automatically when the camera is panned to the end of the guides and the panorama is complete. Sweep camera along yellow line in direction of y ANGLE 30 DIRECTION 2.0 800 105 5 Taking Photographs For Best Results For best results, use a lens with a focal length of 35 mm or less (50 mm or less in 35 mm format). Prop your elbows against your sides and move the camera slowly in a small circle at a steady speed, keeping the camera parallel or at right angles to the horizon and being careful only to pan in the direction shown by the guides. Use a tripod for best results. If the desired results are not achieved, try panning at a different speed. O If the shutter button is pressed all the way down before the panorama is complete, shooting will end and no panorama may be recorded. Shooting may also be interrupted if the camera is panned too quickly or too slowly. Panning the camera in a direction other than that shown cancels shooting. 5 Taking Photographs Panoramas are created from multiple frames; if ON is selected for D BUTTON/DIAL SETTING > SHUTTER AE, exposure for the entire panorama is determined by the first frame. The camera may in some cases record an greater or lesser angle than selected or be unable to stitch the frames together perfectly. The last part of the panorama may not be recorded if shooting ends before the panorama is complete. The desired results may not be achieved with moving subjects, subjects close to the camera, unvarying subjects such as the sky or a field of grass, subjects that are in constant motion, such as waves and waterfalls, or subjects that undergo marked changes in brightness. Panoramas may be blurred if the subject is poorly lit. 106 Panoramas Viewing Panoramas In full-frame playback, you can use the rear command dial to zoom panoramas in or out. Alternatively, you can play the panorama back using the selector. PLAY STOP PAUSE 107 5 Taking Photographs Press the selector down to start playback and press again to pause. While playback is paused, you can scroll the panorama manually by pressing the selector left or right; vertical panoramas will scroll vertically, horizontal panoramas horizontally. To exit to full-frame playback, press the selector up. Flash Photography Use the supplied EF-X8 shoe-mounted flash unit for additional lighting at night or indoors under low light. 1 Remove the hot shoe cover and slide the flash onto the hot shoe as shown, stopping when it clicks into place. 2 Raise the flash. O If the flash is not raised, set- 5 Taking Photographs tings will be adjusted for units connected via the sync terminal (P 267). 3 Select FLASH FUNCTION SETTING in the F FLASH SETTING menu. FLASH SETTING FLASH FUNCTION SETTING RED EYE REMOVAL TTL-LOCK MODE LED LIGHT SETTING MASTER SETTING CH SETTING EXIT N This feature can also be accessed via shortcuts (P 250). 108 Flash Photography 4 Highlight items using the selector and rotate the rear command dial to change the highlighted setting (P 110). 5 Press DISP/BACK to put the changes into effect. MODE SUPPLIED FLASH ADJUST END O Depending on the distance to the subject, some lenses may cast shadows in photos taken with the flash. The flash will not fire at some settings, for example in panorama mode or when the electronic shutter is used. N In TTL mode, the flash may fire several times with each shot. Do not move the camera until shooting is complete. 109 5 Taking Photographs Choose shutter speeds slower than 250X when using the flash in exposure mode S (shutter-priority AE) or manual (M). Flash Settings The following settings are available when the supplied EF-X8 shoe-mounted flash unit is attached. MODE SUPPLIED FLASH ADJUST Setting 5 END Taking Photographs Description Choose from the following options: • TTL: TTL mode. Adjust flash compensation (B) and choose a flash mode (C). • M: The flash fires at the selected output (B) regardless of subject brightness or camera settings. Output is expressed in fractions of full power, from ⁄ to ⁄. The desired results may not be achieved at low values if they exceed the limits A Flash control of the flash control system; take a test shot and check the results. mode • C (COMMANDER): Choose if the flash is being used to control remote synced flash units, for example as part of a studio flash system. • D (OFF): The EF-X8 does not fire. Flash units connected via the sync terminal will still fire when the shutter is released, but can be disabled by lowering the EF-X8 and turning the units off in the flash settings menu. Flash compenAdjust flash level. The options available vary with B sation/output the flash control mode (A). 110 Flash Photography Setting C Flash mode (TTL) 111 5 Taking Photographs D Sync Description Choose a flash mode for TTL flash control. The options available vary with the shooting mode (P, S, A, or M) selected. • E (FLASH AUTO): The flash fires only as required; flash level is adjusted according to subject brightness. A p icon displayed when the shutter button is pressed halfway indicates that the flash will fire when the photo is taken. • F (STANDARD): The flash fires with every shot if possible; flash level is adjusted according to subject brightness. The flash will not fire if not fully charged when the shutter is released. • G (SLOW SYNC.): Combine the flash with slow shutter speeds when photographing portrait subjects against a backdrop of night scenery. The flash will not fire if not fully charged when the shutter is released. Choose whether the flash is timed to fire immediately after the shutter opens (H/1ST CURTAIN) or immediately before it closes (I/2ND CURTAIN). 1ST CURTAIN is recommended in most circumstances. Flash Photography Red-Eye Removal Red-eye removal is available when an option other than OFF is selected for F FLASH SETTING > RED EYE REMOVAL and G AF/MF SETTING > FACE/EYE DETECTION SETTING is ON. Red-eye removal minimizes “red-eye” caused when light from the flash is reflected from the subject’s retinas. Flash Sync Speed The flash will synchronize with the shutter at shutter speeds of ½50 s or slower. 5 Optional Flash Units from FUJIFILM The camera can be used with optional FUJIFILM shoe-mounted flash units. Taking Photographs Third-Party Flash Units Do not use third-party flash units that apply over 300 V to the camera hot shoe. 112 The Shooting Menus 113 H IMAGE QUALITY SETTING Adjust image quality settings. To display image quality settings, press MENU/OK in the shooting display and select the H (IMAGE QUALITY SETTING) tab. IMAGE QUALITY SETTING IMAGE SIZE IMAGE QUALITY RAW RECORDING FILM SIMULATION GRAIN EFFECT DYNAMIC RANGE WHITE BALANCE HIGHLIGHT TONE EXIT N The options available vary with the shooting mode selected. 6 The Shooting Menus 114 IMAGE QUALITY SETTING IMAGE SIZE Choose the size and aspect ratio at which still pictures are recorded. Option O3:2 P3:2 Q3:2 Image size Option 6000 × 4000 O 16 : 9 4240 × 2832 P 16 : 9 3008 × 2000 Q 16 : 9 Image size Option 6000 × 3376 O 1 : 1 4240 × 2384 P 1 : 1 3008 × 1688 Q 1 : 1 Image size 4000 × 4000 2832 × 2832 2000 × 2000 N IMAGE SIZE is not reset when the camera is turned off or another shooting mode is selected. 115 6 The Shooting Menus Aspect Ratio Pictures with an aspect ratio of 3∶2 have the same proportions as a frame of 35 mm film, while an aspect ratio of 16∶9 is suited to display on High Definition (HD) devices. Pictures with an aspect ratio of 1∶1 are square. IMAGE QUALITY Choose a file format and compression ratio. Select FINE or NORMAL to record JPEG images, RAW to record RAW images, or FINE+RAW or NORMAL+RAW to record both JPEG and RAW images. FINE and FINE+RAW use lower JPEG compression ratios for higher-quality JPEG images, while NORMAL and NORMAL+RAW use higher JPEG compression ratios to increase the number of images that can be stored. 6 The Shooting Menus The Function Buttons To toggle RAW image quality on or off for a single shot, assign RAW to a function button (P 258). If a JPEG option is currently selected for image quality, pressing the button temporarily selects the equivalent JPEG+RAW option. If a JPEG+RAW option is currently selected, pressing the button temporarily selects the equivalent JPEG option, while if RAW is selected, pressing the button temporarily selects FINE. Taking a picture or pressing the button again restores the previous setting. 116 IMAGE QUALITY SETTING RAW RECORDING Choose whether to compress RAW images. Option Description UNCOMPRESSED RAW images are not compressed. RAW images are compressed using a reversible algorithm that reduces file size with no loss of imLOSSLESS age data. The images can be viewed in RAW FILE COMPRESSED CONVERTER EX 2.0 or other software that supports “lossless” RAW compression (P 298). 6 The Shooting Menus 117 FILM SIMULATION Simulate the effects of different kinds of film, including black-and-white (with or without color filters). Choose a palette according to your subject and creative intent. Option c PROVIA/ STANDARD d Velvia/VIVID e ASTIA/SOFT 6 The Shooting Menus i CLASSIC CHROME g PRO Neg. Hi h PRO Neg. Std 118 Description Standard color reproduction. Suited to a wide range of subjects, from portraits to landscapes. A high-contrast palette of saturated colors, suited to nature photos. Enhances the range of hues available for skin tones in portraits while preserving the bright blues of daylight skies. Recommended for outdoor portrait photography. Soft color and enhanced shadow contrast for a calm look. Offers slightly more contrast than h PRO Neg. Std. Recommended for outdoor portrait photography. A soft-toned palette. The range of hues available for skin tones is enhanced, making this a good choice for studio portrait photography. IMAGE QUALITY SETTING Option Description Take black-and-white photos with rich grada* a ACROS tion and outstanding sharpness. b MONOCHROME * Take pictures in standard black and white. Take pictures in sepia. f SEPIA * Available with yellow (Ye), red (R), and green (G) filters, which deepen shades of gray corresponding to hues complementary to the selected color. The yellow (Ye) filter deepens purples and blues and the red (R) filter blues and greens. The green (G) filter deepens reds and browns, including skin tones, making it a good choice for portraits. N Film simulation options can be combined with tone and sharpness settings. For more information, visit: http://fujifilm-x.com/en/x-stories/ the-world-of-film-simulation-episode-1/ 119 6 The Shooting Menus Film simulation settings can also be accessed via shortcuts (P 250). GRAIN EFFECT Add a film grain effect. Select an amount (STRONG or WEAK) or choose OFF to turn film grain off. STRONG 6 The Shooting Menus 120 Options WEAK OFF IMAGE QUALITY SETTING DYNAMIC RANGE Control contrast. Choose lower values to increase contrast when shooting indoors or under overcast skies, higher values to reduce loss of detail in highlights and shadows when photographing high-contrast scenes. Higher values are recommended for scenes that include both sunlight and deep shade, for such high-contrast subjects as sunlight on water, brightly-lit autumn leaves, and portraits taken against a blue sky, and for white objects or people wearing white; note, however, that mottling may appear in pictures taken at higher values. Options V 100% W 200% X 400% N If AUTO is selected, the camera will automatically choose either V 100% or W 200% according to the subject and shooting conditions. Shutter speed and aperture will be displayed when the shutter button is pressed halfway. W 200% is available at sensitivities of ISO 400 and above, X 400% at sensitivities of ISO 800 and above. 121 6 The Shooting Menus AUTO WHITE BALANCE For natural colors, choose a white balance option that matches the light source. 6 The Shooting Menus Option Description AUTO White balance is adjusted automatically. k/l/m Measure a value for white balance. k Choose a color temperature. i For subjects in direct sunlight. j For subjects in the shade. k Use under “daylight” fluorescent lights. l Use under “warm white” fluorescent lights. m Use under “cool white” fluorescent lights. n Use under incandescent lighting. Reduces the blue cast typically associated with ung derwater lighting. N Results vary with shooting conditions. Play pictures back after shooting to check colors. White balance is adjusted for flash lighting only in AUTO and g modes. Turn the flash off using other white balance options. White balance options can also be accessed via shortcuts (P 250). 122 IMAGE QUALITY SETTING Fine-Tuning White Balance Pressing MENU/OK after selecting a white balance option displays the dialog shown at right; use the selector to fine-tune white balance or press DISP/BACK to exit without fine-tuning. WB SHIFT AUTO R:0 B:0 SET 6 The Shooting Menus 123 Custom White Balance Choose k, l, or m to adjust white balance for unusual lighting conditions. White balance measurement options will be displayed; frame a white object so that it fills the display and press the shutter button all the way down to measure white balance (to select the most recent custom value and exit without measuring white balance, press DISP/BACK, or press MENU/OK to select the most recent value and display the fine-tuning dialog). • If “COMPLETED!” is displayed, press MENU/OK to set white balance to the measured value. 6 If “UNDER” is displayed, raise exposure compensation • and try again. • If “OVER” is displayed, lower exposure compensation and try again. CUSTOM WB SHUTTER : NEW WB SHIFT The Shooting Menus 124 NOT CHANGE IMAGE QUALITY SETTING k: Color Temperature Selecting k in the white balance menu displays a list of color temperatures; highlight a color temperature and press MENU/OK to select the highlighted option and display the fine-tuning dialog. WHITE BALANCE COLOR TEMPERATURE R:0 B:0 SET SHIFT 10000K 9100K 8300K 7700K 7100K 125 6 The Shooting Menus Color Temperature Color temperature is an objective measure of the color of a light source, expressed in Kelvin (K). Light sources with a color temperature close to that of direct sunlight appear white; light sources with a lower color temperature have a yellow or red cast, while those with a higher color temperature are tinged with blue. You can match color temperature to the light source, or choose options that differ sharply from the color of the light source to make pictures “warmer” or “colder.” HIGHLIGHT TONE Adjust the appearance of highlights. Choose from seven options between +4 and −2. +4 +3 +2 Options +1 0 −1 −2 6 SHADOW TONE The Shooting Menus Adjust the appearance of shadows. Choose from seven options between +4 and −2. +4 126 +3 +2 Options +1 0 −1 −2 IMAGE QUALITY SETTING COLOR Adjust color density. Choose from nine options between +4 and −4. +4 +3 +2 +1 Options 0 −1 −2 −3 −4 +4 +3 +2 +1 Options 0 −1 −2 −3 −4 127 The Shooting Menus 6 SHARPNESS Sharpen or soften outlines. Choose from nine options between +4 and −4. NOISE REDUCTION Reduce noise in pictures taken at high sensitivities. Choose from nine options between +4 and −4. +4 +3 +2 +1 Options 0 −1 −2 −3 −4 6 LONG EXPOSURE NR The Shooting Menus Select ON to reduce mottling in long time-exposures. Options ON 128 OFF IMAGE QUALITY SETTING LENS MODULATION OPTIMIZER Select ON to improve definition by adjusting for diffraction and the slight loss of focus at the periphery of the lens. Options ON OFF The Shooting Menus 6 COLOR SPACE Choose the gamut of colors available for color reproduction. Option Description sRGB Recommended in most situations. Adobe RGB For commercial printing. 129 PIXEL MAPPING Use this option if you notice bright spots in your pictures. 1 Press MENU/OK in the shooting display and select the H IMAGE QUALITY SETTING tab. 2 Highlight PIXEL MAPPING and press MENU/OK to perform pixel mapping. Processing may take a few seconds. O Results are not guaranteed. Be sure the battery is fully charged before beginning pixel mapping. 6 The Shooting Menus Pixel mapping is not available when the camera temperature is elevated. 130 IMAGE QUALITY SETTING SELECT CUSTOM SETTING Recall settings saved with EDIT/SAVE CUSTOM SETTING. Settings can be recalled from any of the seven custom settings banks. Banks CUSTOM 1 CUSTOM 2 CUSTOM 3 CUSTOM 4 CUSTOM 5 CUSTOM 6 CUSTOM 7 1 Press MENU/OK in shooting mode to display the shooting menu. Select the H IMAGE QUALITY SETTING tab, then highlight EDIT/SAVE CUSTOM SETTING and press MENU/OK. 131 The Shooting Menus 6 EDIT/SAVE CUSTOM SETTING Save up to 7 sets of custom camera settings for commonly-encountered situations. Saved settings can be recalled using H IMAGE QUALITY SETTING > SELECT CUSTOM SETTING. IMAGE QUALITY SETTING 2 3 4 6 Highlight a custom settings bank and press MENU/OK to select. Adjust the following as desired: • DYNAMIC RANGE • FILM SIMULATION • GRAIN EFFECT • WHITE BALANCE • HIGHLIGHT TONE • SHADOW TONE • COLOR • SHARPNESS • NOISE REDUCTION Press DISP/BACK. A confirmation dialog will be displayed; highlight OK and press MENU/OK. IMAGE QUALITY SETTING CUSTOM 1 SELECT CUSTOM SETTING EDIT/SAVE CUSTOMCUSTOM SETTING2 CUSTOM 3 CUSTOM 4 CUSTOM 5 CUSTOM 6 CUSTOM 7 CUSTOM 1 SAVE CURRENT SETTINGS DYNAMIC RANGE FILM SIMULATION GRAIN EFFECT WHITE BALANCE HIGHLIGHT TONE SHADOW TONE COLOR AUTO OFF AUTO EXIT SAVE CUSTOM SETTING CUSTOM 1 SET OK? OK CANCEL The Shooting Menus N To store current camera settings in the selected bank, highlight SAVE CURRENT SETTINGS in Step 3 and press MENU/OK. Banks can be renamed using EDIT CUSTOM NAME. To restore default settings for the current bank, select RESET. 132 G AF/MF SETTING Adjust focus settings. To display focus settings, press MENU/OK in the shooting display and select the G (AF/MF SETTING) tab. AF/MF SETTING FOCUS AREA AF MODE AF-C CUSTOM SETTINGS STORE AF MODE BY ORIENTAION AF POINT DISPLAY NUMBER OF FOCUS POINTS PRE-AF AF ILLUMINATOR EXIT N The options available vary with the shooting mode selected. The Shooting Menus 6 FOCUS AREA Choose the focus area for autofocus, manual focus, and focus zoom. 133 AF MODE Choose the AF mode for focus modes S and C. Option 6 The Shooting Menus Description The camera focuses on the subject in the selected focus r point. The number of focus points available can be selectSINGLE ed using G AF/MF SETTING > NUMBER OF FOCUS POINT POINTS. Use for pin-point focus on a selected subject. The camera focuses on the subject in the selected focus y zone. Focus zones include multiple focus points, makZONE ing it easier to focus on subjects that are in motion. In focus mode C, the camera tracks focus on the subject in the selected focus point while the shutter button is z pressed halfway. In focus mode S, the camera automatWIDE/ ically focuses on high-contrast subjects; the areas in foTRACKING cus are shown in the display. The camera may be unable to focus on small objects or subjects that are moving rapidly. Rotate the rear command dial in the focus-point selecj tion display (P 80, 81) to cycle through AF modes ALL in the following order: r SINGLE POINT, y ZONE, and z WIDE/TRACKING. 134 AF/MF SETTING AF-C CUSTOM SETTINGS Select focus-tracking options for focus mode C. Choose from Sets 1–5 according to your subject or select Set 6 for custom focus-tracking options. Option SET 1 MULTI PURPOSE SET 2 IGNORE OBSTACLES & CONTINUE TO TRACK SUBJECT SET 4 FOR SUDDENLY APPEARING SUBJECT SET 5 FOR ERRATICALLY MOVING & ACCEL./ DECEL. SUBJECT SET 6 CUSTOM SET 1 MULTI PURPOSE TRACKING SENSITIVITY SPEED TRACKING SENSITIVITY ZONE AREA SWITCHING AUTO OK Description A standard tracking option that works well with the typical range of moving subjects. The focus system attempts to track the chosen subject. Choose with subjects that are hard to keep in the focus area or if other objects are likely to enter the focus area with the subject. The focus system attempts to compensate for subject acceleration or deceleration. Choose for subjects prone to rapid changes in velocity. The focus system attempts to focus quickly on subjects entering the focus area. Choose for subjects that appear abruptly or when rapidly switching subjects. Choose for hard-to-track subjects prone not only to sudden changes in velocity but also to large movements front to back and left to right. Adjust TRACKING SENSITIVITY, SPEED TRACKING SENSITIVITY, and ZONE AREA SWITCHING to suit your preferences based on the values for Sets 1–5 (P 136, 139). 135 6 The Shooting Menus SET 3 FOR ACCELERATING/ DECELERATING SUBJECT AF-C CUSTOM SETTINGS Focus Tracking Options The individual parameters that are part of a focus tracking set are described below. TRACKING SENSITIVITY This parameter determines how long the camera waits to switch focus when an object enters the focus area behind or in front of the current subject. The higher the value, the longer the camera will wait. 6 0 1 Options 2 TRACKING SENSITIVITY QUICK LOCKED ON SETS THE TRACKING SENSITIVITY ON THE SUBJECT ADJUST 3 SWITCH 4 The Shooting Menus O The higher the value, the longer it takes the camera to refocus when you attempt to switch subjects. The lower the value, the more likely the camera is to switch focus from your subject to other objects in the focus area. 136 AF/MF SETTING SPEED TRACKING SENSITIVITY This parameter determines how sensitive the tracking system is to changes in subject velocity. The higher the value, the greater the precision with which the system attempts to respond to sudden movement. 0 Options 1 SPEED TRACKING SENSITIVITY STEADY ACCEL./DECEL. SETS THE SPEED TRACKING SENSITIVITY FOR MOVING SUBJECT ADJUST SWITCH 2 O The higher the value, the more difficulty the camera will 137 6 The Shooting Menus have focusing in situations in which autofocus does not perform well, such as when the subject is highly reflective or low in contrast. ZONE AREA SWITCHING This parameter determines the focus area given priority in zone AF. ZONE AREA SWITCHING CENTER AUTO FRONT SETS THE SWITCHING SENSITIVITY OF FOCUS FRAME IN ZONE AREA ADJUST SWITCH Option Description CENTER Zone AF assigns priority to subjects in the center of the zone. The camera locks focus on the subject at the center of the AUTO zone and then switches focus areas as necessary to track it. Zone AF assigns priority to the subjects closest to the FRONT camera. O This option takes effect only when y ZONE is selected 6 for AF mode. The Shooting Menus Set Values Parameter values for the different sets are listed below. TRACKING SPEED TRACKING ZONE AREA SENSITIVITY SENSITIVITY SWITCHING SET 1 2 0 AUTO SET 2 3 0 CENTER SET 3 2 2 AUTO SET 4 0 1 FRONT SET 5 3 2 AUTO 138 AF/MF SETTING Custom Focus Tracking Options Follow the steps below to adjust settings for Set 6. 1 Select AF-C CUSTOM SETTINGS > SET 6 CUSTOM. AF-C CUSTOM SETTINGS SET 6 CUSTOM TRACKING SENSITIVITY SPEED TRACKING SENSITIVITY ZONE AREA SWITCHING ADJUST AUTO SET DETAIL RESET 2 Press the selector up or down to highlight items and rotate the front command dial to change. To reset settings to their original values, press b. 3 Press DISP/BACK when settings are complete. 6 The Shooting Menus 139 STORE AF MODE BY ORIENTATION Choose whether the focus mode and focus area used when the camera is in portrait orientation are stored separately from those used when the camera is in landscape orientation. Option OFF Description The same settings are used in both orientations. The focus area for each orientation can be selectFOCUS AREA ONLY ed separately. The focus mode and focus area can be selected ON separately. The Shooting Menus 6 AF POINT DISPLAY y z Choose whether individual focus frames are displayed when ZONE or WIDE/TRACKING is selected for G AF/MF SETTING > AF MODE. Options ON 140 OFF AF/MF SETTING NUMBER OF FOCUS POINTS Choose the number of focus points available for focus-point selection in manual focus mode or when SINGLE POINT is selected for AF MODE. Option 91 POINTS (7 × 13) 325 POINTS (13 × 25) Description Choose from 91 focus points arranged in a 7- by 13-point grid. Choose from 325 focus points arranged in a 13- by 25-point grid. The Shooting Menus 6 PRE-AF If ON is selected, the camera will continue to adjust focus even when the shutter button is not pressed halfway. Note that this increases the drain on the battery. Options ON OFF 141 AF ILLUMINATOR If ON is selected, the AF-assist illuminator will light to assist autofocus. Options ON OFF O The camera may be unable to focus using the AF-assist illuminator in some cases. If the camera is unable to focus, try increasing the distance to the subject. Avoid shining the AF-assist illuminator directly into your subject’s eyes. 6 The Shooting Menus 142 AF/MF SETTING Option Description FACE ON/EYE OFF Intelligent Face Detection only. FACE ON/ The camera automatically chooses which eye to EYE AUTO focus on when a face is detected. FACE ON/RIGHT The camera focuses on the right eye of subjects EYE PRIORITY detected using Intelligent Face Detection. FACE ON/LEFT The camera focuses on the left eye of subjects deEYE PRIORITY tected using Intelligent Face Detection. FACE OFF/EYE OFF Intelligent Face Detection and eye priority off. 143 The Shooting Menus FACE/EYE DETECTION SETTING Intelligent Face Detection sets focus and exposure for human faces anywhere in the frame, preventing the camera from focusing on the background in group portraits. Choose for shots that emphasize portrait subjects. Faces can be detected with the camera in vertical or horizontal orientation; if a face is detected, it will be indicated by a green border. If there is more than one face in the frame, the camera will select the face closest to the center; other faces are indicated by white borders. You can also choose whether the camera detects and focuses on eyes when Intelligent Face Detection is on. 6 Choose from the following options: O In some modes, the camera may set exposure for the frame as a whole rather than the portrait subject. If the subject moves as the shutter button is pressed, the face may not be in the area indicated by the green border when the picture is taken. N If the camera is unable to detect the subject’s eyes because they are hidden by hair, glasses, or other objects, the camera will instead focus on faces. Face/eye detection options can also be accessed via shortcuts (P 250). 6 The Shooting Menus 144 AF/MF SETTING AF+MF If ON is selected in focus mode S, focus can be adjusted manually by rotating the focus ring while the shutter button is pressed halfway. Both standard and focus peaking MF assist options are supported. Options ON OFF O Lenses with a focus distance indicator must be set to manual focus mode (MF) before this option can be used. Selecting MF disables the focus distance indicator. Set the focus ring to the center of the focus distance indicator, as the camera may fail to focus if the ring is set to infinity or the minimum focus distance. 145 6 The Shooting Menus AF + MF Focus Zoom When ON is selected for G AF/MF SETTING > FOCUS CHECK and SINGLE POINT selected for AF MODE, focus zoom can be used to zoom in on the selected focus area. The zoom ratio (2.5× or 6×) can be selected using the rear command dial. MF ASSIST Choose how focus is displayed in manual focus mode. Option STANDARD DIGITAL SPLIT IMAGE FOCUS PEAK HIGHLIGHT Description Focus is displayed normally (focus peaking and digital split image are not available). Displays a black-and-white (MONOCHROME) or color (COLOR) split image in the center of the frame. Frame the subject in the split-image area and rotate the focus ring until the three parts of the split image are correctly aligned. The camera heightens high-contrast outlines. Choose a color and peaking level. 6 FOCUS CHECK The Shooting Menus If ON is selected, the display will automatically zoom in on the selected focus area when the focus ring is rotated in manual focus mode. Options ON OFF O Pressing the center of the rear command dial cancels focus zoom. 146 AF/MF SETTING INTERLOCK SPOT AE & FOCUS AREA Select ON to meter the current focus frame when SINGLE POINT is selected for AF MODE and SPOT is selected for PHOTOMETRY. Options ON OFF The Shooting Menus 6 INSTANT AF SETTING Choose whether the camera focuses using single AF (AF-S) or continuous AF (AF-C) when the AF-L button is pressed in manual focus mode. Options AF-S AF-C 147 AF/MF SETTING DEPTH-OF-FIELD SCALE Choose FILM FORMAT BASIS to help you make practical assessments of depth of field for pictures that will be viewed as prints and the like, PIXEL BASIS to help you assess depth of field for pictures that will be viewed at high resolutions on computers or other electronic displays. Options PIXEL BASIS FILM FORMAT BASIS 6 RELEASE/FOCUS PRIORITY The Shooting Menus Choose how the camera focuses in focus mode AF-S or AF-C. Option RELEASE FOCUS 148 Description Shutter response is prioritized over focus. Pictures can be taken when the camera is not in focus. Focus is prioritized over shutter response. Pictures can be only taken when the camera is in focus. A SHOOTING SETTING Adjust shooting options. To display shooting options, press MENU/OK in the shooting display and select the A (SHOOTING SETTING) tab. SHOOTING SETTING DRIVE SETTING SELF-TIMER INTERVAL TIMER SHOOTING SHUTTER TYPE IS MODE ISO AUTO SETTING MOUNT ADAPTOR SETTING WIRELESS COMMUNICATION EXIT N The options available vary with the shooting mode selected. DRIVE SETTING Adjust settings for the various drive modes. Option 149 6 The Shooting Menus Description Choose the settings used when the drive dial is rotated BKT SETTING to BKT (P 150). Select the frame rate used when the drive dial is rotated CH HIGH to CH (continuous high speed): 14, 11, or 8 fps. Note SPEED that 14 fps is available only with the electronic shutter BURST and 11 fps only with the electronic shutter or a power booster grip (available separately). CL LOW Select the frame rate used when the drive dial is rotated SPEED to CL (continuous low speed): 5, 4, or 3 fps. BURST ADV. FILTER Choose the filter used when the drive dial is rotated SETTING to ADV. (P 103). BKT SETTING Use BKT SELECT to choose a bracketing type and the AE BKT, ISO BKT, FILM SIMULATION BKT, and WHITE BALANCE BKT options to choose the bracketing amount for each type. Option 6 The Shooting Menus Description Choose from O AE BKT, W ISO BKT, X FILM SIMULATION BKT, H WHITE BALANCE BKT SELECT BKT, and Y DYNAMIC RANGE BKT. Adjust exposure bracketing settings. • FRAMES/STEP SETTING: Choose the number of shots in the bracketing sequence (FRAMES) and the amount exposure is varied with each shot (STEP). AE BKT • 1 FRAME/CONTINUOUS: Choose whether the shots in the bracketing sequence are taken one at a time (1 FRAME) or in a single burst (CONTINUOUS). • SEQUENCE SETTING: Choose the order in which the shots are taken. ISO BKT Choose from ±1⁄3, ±2⁄3, and ±1. FILM SIMULATION Choose the three film simulation types used for BKT film simulation bracketing (P 118). WHITE BALANCE BKT Choose from ±1, ±2, and ±3. 150 SHOOTING SETTING SELF-TIMER Choose a shutter release delay. Option Description The shutter is released two seconds after the shutter button is pressed. Use to reduce blur caused by the camera R 2 SEC moving when the shutter button is pressed. The self-timer lamp blinks as the timer counts down. The shutter is released ten seconds after the shutter button is pressed. Use for photographs in which you wish to S 10 SEC appear yourself. The self-timer lamp blinks immediately before the picture is taken. OFF Self-timer off. O Stand behind the camera when using the shutter button. Standing in front of the lens can interfere with focus and exposure. The self-timer turns off automatically when the camera is turned off. 151 The Shooting Menus If an option other than OFF is se9 6 lected, the timer will start when the shutter button is pressed all the way down. The display in the monitor shows the number of seconds remaining until the shutter is released. To stop the timer before the picture is taken, press DISP/BACK. INTERVAL TIMER SHOOTING Configure the camera to take photos automatically at a preset interval. 1 Highlight INTERVAL TIMER SHOOTING in the A (SHOOTING SETTING) tab and press MENU/OK. 2 Use the selector to choose the interval and number of shots. Press MENU/OK to proceed. INTERVAL/NUMBER OF TIMES INTERVAL NUMBER OF TIMES END CANCEL START WAITING TIME LATER ESTIMATED START TIME 11 : 00 PM START 6 3 The Shooting Menus Use the selector to choose the starting time and then press MENU/OK. Shooting will start automatically. 152 CANCEL CANCEL SHOOTING SETTING O Interval timer photography can not be used at a shutter speed of B (bulb) or with multiple exposure photography. In burst mode, only one picture will be taken each time the shutter is released. N Use of a tripod is recommended. Check the battery level before starting. We recommend using an optional AC-9V AC power adapter and CP-W126 DC coupler. The display turns off between shots and lights a few seconds before the next shot is taken. The display can be activated at any time by pressing the shutter button. To continue shooting until the memory card is full, set the number of shots to ∞. 6 The Shooting Menus 153 SHUTTER TYPE Choose the shutter type. Choose the electronic shutter to mute the shutter sound. Option t MECHANICAL SHUTTER s ELECTRONIC SHUTTER t MECHANICAL + s ELECTRONIC Description Take pictures with the mechanical shutter. Take pictures with the electronic shutter. The camera chooses the shutter type according to shooting conditions. If an option other than t MECHANICAL SHUTTER is selected, shutter speeds faster than 1⁄8000 s can be chosen by rotating the shutter speed dial to 8000 and 6 then rotating the rear command dial. The Shooting Menus O Distortion may be visible in shots of moving subjects with electronic shutter, while banding and fog may occur in shots taken under fluorescent lights or other flickering or erratic illumination. When taking pictures with the shutter muted, respect your subjects’ image rights and right to privacy. N When the electronic shutter is used, the flash is disabled, shutter speed and sensitivity are restricted to values of 1⁄32000–30 s and ISO 12800–200 respectively, and long exposure noise reduction has no effect. 154 SHOOTING SETTING IS MODE Reduce blur. Option Description l CONTINUOUS Image stabilization on. Image stabilization enabled only when the shutter m SHOOTING button is pressed halfway (focus mode C) or the ONLY shutter is released. Image stabilization off ; x appears in the display. OFF Recommended when the camera is on a tripod. N This option is available only with lenses that support image stabilization. 6 The Shooting Menus 155 ISO AUTO SETTING Choose the base sensitivity, maximum sensitivity, and minimum shutter speed for the A position on the sensitivity dial. Settings for AUTO1, AUTO2, and AUTO3 can be stored separately. Item Options DEFAULT SENSITIVITY 12800–200 MAX. SENSITIVITY 12800–400 MIN. SHUTTER SPEED ⁄–¼ SEC, AUTO Default AUTO1 AUTO2 AUTO3 200 800 1600 3200 ⁄ SEC The Shooting Menus The camera automatically chooses a sensitivity between the default and maximum values; sensitivity 6 is only raised above the default value if the shutter speed required for optimal exposure would be slower than the value selected for MIN. SHUTTER SPEED. 156 SHOOTING SETTING N If the value selected for DEFAULT SENSITIVITY is higher than that selected for MAX. SENSITIVITY, DEFAULT SENSITIVITY will be set to the value selected for MAX. SENSITIVITY. The camera may select shutter speeds slower than MIN. SHUTTER SPEED if pictures would still be underexposed at the value selected for MAX. SENSITIVITY. If AUTO is selected for MIN. SHUTTER SPEED, the camera will automatically choose a minimum shutter speed approximately equal to the inverse of the lens’ focal length, in seconds (for example, if the lens has a focal length of 50 mm, the camera will choose a minimum shutter speed in the neighborhood of 1⁄50 s). The minimum shutter speed is not affected by the option selected for image stabilization. 6 The Shooting Menus 157 MOUNT ADAPTOR SETTING Adjust settings for M-mount lenses connected using an optional FUJIFILM M MOUNT ADAPTER. Choosing a Focal Length If the lens has a focal length of 21, 24, 28, or 35 mm, choose a matching option in the MOUNT ADAPTOR SETTING menu. For other lenses, select option 5 or 6 and use the selector to enter the focal length. 6 LENS REGISTRATION LENS 1 LENS 2 LENS 3 LENS 4 LENS 5 LENS 6 SET LENS 5 INPUT FOCAL LENGTH SET The Shooting Menus 158 CANCEL SHOOTING SETTING Distortion Correction Choose from STRONG, MEDIUM, or WEAK options to correct BARREL or PINCUSHION distortion. Color Shading Correction Color (shading) variations between the center and edges of the frame can be adjusted separately for each corner. LENS5 DISTORTION CORRECTION BARREL STRONG BARREL MEDIUM BARREL WEAK OFF PINCUSHION WEAK PINCUSHION MEDIUM PINCUSHION STRONG NEXT SET To use color shading correction, follow the steps below. Rotate the rear command dial to choose a corner. 6 The selected corner is indicated by a triangle. 2 Use the selector to adjust shading until there is no visible difference in color between the selected corner and the center of the image. Press the selector left or right to adjust colors on the cyan– red axis. Press the selector up or down to adjust colors on the blue–yellow axis. N To determine the amount required, adjust color shading correction while taking photos of blue sky or a sheet of gray paper. 159 The Shooting Menus 1 Peripheral Illumination Correction Choose from values between –5 and +5. Choosing positive values increases peripheral illumination, while choosing negative values reduces peripheral illumination. Positive values are recommended for vintage lenses, negative values to create the effect of images taken with an antique lens or a pinhole camera. SET CANCEL N To determine the amount required, adjust peripheral il- lumination correction while taking photos of blue sky or a sheet of gray paper. 6 The Shooting Menus 160 SHOOTING SETTING WIRELESS COMMUNICATION Connect to smartphones running the “FUJIFILM Camera Remote” app. The smartphone can be used to browse the images on the camera, download selected images, control the camera remotely, or upload location data to the camera. N For downloads and other information, visit: http://fujifilm-dsc.com/wifi/ 6 The Shooting Menus 161 F FLASH SETTING Adjust flash-related settings. To display flash-related settings, press MENU/OK in the shooting display and select the F (FLASH SETTING) tab. FLASH SETTING FLASH FUNCTION SETTING RED EYE REMOVAL TTL-LOCK MODE LED LIGHT SETTING MASTER SETTING CH SETTING EXIT N The options available vary with the shooting mode selected. 6 FLASH FUNCTION SETTING The Shooting Menus Choose a flash control mode, flash mode, or sync mode or adjust the flash level. The options available vary with the flash. MODE SUPPLIED FLASH ADJUST N See page 264 for more information. 162 END FLASH SETTING RED EYE REMOVAL Remove red-eye effects caused by the flash. Option FLASH + REMOVAL FLASH REMOVAL OFF Description A red-eye reduction pre-flash is combined with digital red-eye removal. Flash red-eye reduction only. Digital red-eye removal only. Flash red-eye reduction and digital red-eye removal off. N Flash red-eye reduction can be used in TTL flash control mode. Digital red-eye removal is performed only when a face is detected and is not available with RAW images. 6 The Shooting Menus 163 TTL-LOCK MODE Instead of adjusting flash level with each shot, TTL flash control can be locked for consistent results across a series of photographs. Option Description The value metered for the most recent photo takLOCK WITH LAST en using TTL will be used for subsequent photos. FLASH An error message will be displayed if no previously metered value exists. LOCK WITH The value metered with the next series of METERING FLASH pre-flashes will be used for subsequent photos. N To use TTL lock, assign TTL-LOCK to a camera control 6 The Shooting Menus and then use the control to enable or disable TTL lock (P 258). Flash compensation can be adjusted while TTL lock is in effect. 164 FLASH SETTING LED LIGHT SETTING Choose whether to use the flash unit’s LED video light (if available) as a catchlight or AF-assist illuminator when taking photos. Option CATCHLIGHT AF ASSIST AF ASSIST + CATCHLIGHT OFF Role of LED video light in still photography Catchlight AF-assist illuminator AF-assist illuminator and catchlight None N This option can also be accessed via the flash settings menu. The Shooting Menus 6 MASTER SETTING Choose a flash group (A, B, or C) for the flash mounted on the camera hot shoe when it functions as a master flash controlling remote flash units via FUJIFILM wireless optical flash control, or choose OFF to limit master flash output to a level that does not affect the final picture. Options Gr A Gr B Gr C OFF N This option can also be accessed via the flash settings menu. 165 FLASH SETTING CH SETTING Choose the channel used for communication between the master flash and remote flash units when using FUJIFILM optical wireless flash control. Separate channels can be used for different flash systems or to prevent interference when multiple systems are operating in close proximity. Options CH1 6 The Shooting Menus 166 CH2 CH3 CH4 B MOVIE SETTING Adjust movie-recording options. To display options for movie recording, press MENU/OK in the shooting display and select the B (MOVIE SETTING) tab. MOVIE SETTING MOVIE MODE MOVIE AF MODE HDMI OUTPUT INFO DISPLAY 4K MOVIE OUTPUT HDMI REC CONTROL MIC LEVEL ADJUSTMENT EXIT N The options available vary with the shooting mode selected. MOVIE MODE Choose a frame size and rate for movie recording. Frame size 3840 × 2160 (4K) 1920 × 1080 (Full HD) 1280 × 720 (HD) Rate 29.97 fps 25 fps 24 fps 23.98 fps 59.94 fps 50 fps 29.97 fps 25 fps 24 fps 23.98 fps 59.94 fps 50 fps 29.97 fps 25 fps 24 fps 23.98 fps 167 6 The Shooting Menus Option U 2160/29.97P U 2160/25P U 2160/24P U 2160/23.98P i 1080/59.94P i 1080/50P i 1080/29.97P i 1080/25P i 1080/24P i 1080/23.98P h 720/59.94P h 720/50P h 720/29.97P h 720/25P h 720/24P h 720/23.98P MOVIE AF MODE Choose how the camera selects the focus point for movie recording. Option Description MULTI Automatic focus-point selection. AREA The camera focuses on the subject in the selected focus area. 6 HDMI OUTPUT INFO DISPLAY The Shooting Menus If ON is selected, HDMI devices to which the camera is connected will mirror the information in the camera display. Options ON 168 OFF MOVIE SETTING 4K MOVIE OUTPUT Choose the destination for 4K movies shot while the camera is connected to an HDMI recorder or other device that supports 4K. Option b CARD HDMI HDMI (a) 169 6 The Shooting Menus Description 4K movies are recorded to a camera memory card in 4K and output to the HDMI device in Full HD. 4K movies are output to the HDMI device in 4K, starting when the shutter button is pressed. The camera does not record 4K movies to a memory card. The camera outputs 4K movies to the HDMI device and does not record them to a memory card. Low gamma and a color space with a wide gamut are used to create footage suitable for post-processing. Minimum sensitivity is set to ISO 800. MOVIE SETTING HDMI REC CONTROL Choose whether the camera sends movie start and stop signals to the HDMI device when the shutter button is pressed to start and stop movie recording. Options ON The Shooting Menus MIC LEVEL ADJUSTMENT Adjust the recording level for the 6 built-in and external microphones. OFF MIC LEVEL ADJUSTMENT SET CANCEL Option Description 20—1 Choose a recording level. OFF Disable the microphone. N Displays shows the peak recording level detected in a given period. You can assign MIC LEVEL ADJUSTMENT to a camera control and then using the control to adjust the microphone level during recording. 170 Playback and the Playback Menu 171 The Playback Display This section lists the indicators that may be displayed during playback. Playback and the Playback Menu O For illustrative purposes, displays are shown with all indicators lit. 2050.12.31 10:00 AM 7 172 The Playback Display Playback and the Playback Menu A Date and time........................44, 204 M Image size/quality ..............115, 116 B Face detection indicator ............143 N Film simulation ............................118 C Red-eye removal indicator O Dynamic range ............................121 ..................................................163, 189 P White balance ..............................122 D Advanced filter..............................102 Q Sensitivity ......................................... 88 E Location data.......................246, 294 R Exposure compensation .............. 92 F Protected image ...........................187 S Aperture...............................63, 69, 72 G Card slot..........................................178 T Shutter speed .....................63, 64, 72 H Frame number ..............................239 U Playback mode indicator ............ 51 I Gift image ........................................ 51 V Movie icon........................................ 58 J Photobook assist indicator .......194 W Rating..............................................174 7 K DPOF print indicator ...................197 L Battery level ..................................... 43 173 The DISP/BACK Button The DISP/BACK button controls the display of indicators during playback. Playback and the Playback Menu Standard Information off 12/31/2050 10:00 AM 12/31/2050 10:00 AM 12/31/2050 10:00 AM 7 FAVORITES Favorites Info display Favorites: Rating Pictures To rate the current picture, press DISP/BACK and press the selector up and down to select from zero to five stars. 174 The Playback Display Viewing Photo Information The photo information display changes each time the selector is pressed up. Basic data 12/31/2050 10:00 AM 23.0mm F5.6 23.0mm sRGB ON S.S 1/4000 F 5.6 ISO 400 Playback and the Playback Menu LENS FOCAL LENGTH COLOR SPACE LENS MODULATION OPT. 12/31/2050 10:00 AM +21/3 NEXT Info display 2 Info display 1 Zooming in on the Focus Point Press the center of the rear command dial to zoom in on the focus point. Press again to return to full-frame playback. 175 7 Viewing Pictures Read this section for information on playback zoom and multi-frame playback. Playback and the Playback Menu Use the rear command dial to go from full-frame playback to playback zoom or multi-frame playback. Full-frame playback 100-0001 Multi-frame playback Playback zoom DISP/BACK MENU/OK 7 Nineframe view Medium zoom HundredMaximum frame zoom view 176 Viewing Pictures N The maximum zoom ratio varies with the option select- ed for H IMAGE QUALITY SETTING > IMAGE SIZE. Playback zoom is not available with cropped or resized copies saved at a size of a. Scroll When the picture is zoomed in, the selector can be used to view areas of the image not currently visible in the display. Navigation window Multi-Frame Playback To change the number of images displayed, rotate the rear command dial left when a picture is displayed full frame. N Use the selector to highlight images and press MENU/OK to view the highlighted image full frame. In the nineand hundred-frame displays, press the selector up or down to view more pictures. 177 Playback and the Playback Menu Playback Zoom Rotate the rear command dial right to zoom in on the current picture, left to zoom out. To exit zoom, press DISP/BACK, MENU/OK, or the center of the rear command dial. 7 C The Playback Menu Adjust playback settings. Playback and the Playback Menu The playback menu is displayed when you press MENU/OK in playback mode. PLAY BACK MENU SWITCH SLOT RAW CONVERSION ERASE CROP RESIZE PROTECT IMAGE ROTATE RED EYE REMOVA EXIT N Use the front command dial to scroll through the menus a page at a time. SWITCH SLOT 7 Choose the card from which images will be played back. N If two memory cards are inserted, you can press and hold the a button to choose a card for playback. 178 The Playback Menu 1 With a RAW picture displayed, press MENU/OK to display the playback menu. 2 Press the selector up or down to highlight C PLAY BACK MENU > RAW CONVERSION and press MENU/OK to display settings. RAW CONVERSION REFLECT SHOOTING COND. PUSH/PULL PROCESSING DYNAMIC RANGE FILM SIMULATION GRAIN EFFECT WHITE BALANCE CREATE CANCEL N These options can also be displayed by pressing the Q button during playback. 179 Playback and the Playback Menu RAW CONVERSION RAW pictures store information on camera settings separately from the data captured by the camera image sensor. Using C PLAY BACK MENU > RAW CONVERSION, you can create JPEG copies of RAW pictures using different options for the settings listed on page 181. The original image data are unaffected, allowing a single RAW image to be processed in a multitude of different ways. 7 Playback and the Playback Menu 3 Press the selector up or down to highlight a setting and press the selector right to display opWB tions. Press the selector up or down to highlight the desired option and press MENU/OK to select and return to the settings list. Repeat this step to adjust additional settings. 4 Press the Q button to preview the JPEG copy and press MENU/OK to save. RAW CONVERSION 撮影時条件を反映 100% 増感/減感 200% ダイナミックレンジ 400% フィルムシミュレーション ホワイトバランス シフト 7 180 The Playback Menu The settings that can be adjusted when converting pictures from RAW to JPEG are: 181 Playback and the Playback Menu Setting Description REFLECT Create a JPEG copy using the settings in effect at SHOOTING COND. the time the photo was taken. PUSH/PULL Adjust exposure. PROCESSING Enhance details in highlights for natural conDYNAMIC RANGE trast. FILM SIMULATION Simulate the effects of different types of film. GRAIN EFFECT Add a film grain effect. WHITE BALANCE Adjust white balance. WB SHIFT Fine-tune white balance. HIGHLIGHT TONE Adjust highlights. SHADOW TONE Adjust shadows. COLOR Adjust color density. SHARPNESS Sharpen or soften outlines. NOISE REDUCTION Process the copy to reduce mottling. LENS Improve definition by adjusting for diffraction MODULATION and the slight loss of focus at the periphery of OPTIMIZER the lens. Choose the color space used for color reproducCOLOR SPACE tion. 7 ERASE Delete individual pictures, multiple selected pictures, or all pictures. Playback and the Playback Menu 7 O Deleted pictures can not be recovered. Protect important pictures or copy them to a computer or other storage device before proceeding. Option Description FRAME Delete pictures one at a time. SELECTED FRAMES Delete multiple selected pictures. ALL FRAMES Delete all unprotected pictures. FRAME 1 Select FRAME for ERASE in the playback menu. 2 Press the selector left or right to scroll through pictures and press MENU/OK to delete (a confirmation dialog is not displayed). Repeat to delete additional pictures. 182 The Playback Menu SELECTED FRAMES 1 Select SELECTED FRAMES for ERASE in the playback menu. Highlight pictures and press MENU/OK to select or deselect (pictures in photobooks or printer orders are shown by S). Selected pictures are indicated by check marks (R). 3 When the operation is complete, press DISP/BACK to display a confirmation dialog. 4 Highlight OK and press MENU/OK to delete the selected pictures. Playback and the Playback Menu 2 7 183 ALL FRAMES 1 Select ALL FRAMES for ERASE in the playback menu. Playback and the Playback Menu 2 A confirmation dialog will be displayed; highlight OK and press MENU/OK to delete all unprotected pictures. N Pressing DISP/BACK cancels deletion; note that any pictures deleted before the button was pressed can not be recovered. If a message appears stating that the selected images are part of a DPOF print order, press MENU/OK to delete the pictures. 7 184 The Playback Menu CROP Create a cropped copy of the current picture. 1 2 3 Display the desired picture. 4 5 Press MENU/OK to display a confirmation dialog. Press MENU/OK again to save the cropped copy to a separate file. Playback and the Playback Menu Select CROP in the playback menu. N Larger crops produce larger copies; all copies have an 7 Use the rear command dial to zoom in and out and press the selector up, down, left, or right to scroll the picture until the desired portion is displayed. aspect ratio of 3∶2. If the size of the final copy will be a, YES will be displayed in yellow. 185 RESIZE Create a small copy of the current picture. Playback and the Playback Menu 1 2 3 Display the desired picture. 4 Press MENU/OK again to save the resized copy to a separate file. Select RESIZE in the playback menu. Highlight a size and press MENU/OK to display a confirmation dialog. N The sizes available vary with the size of the original image. 7 186 The Playback Menu O Protected pictures will be deleted when the memory card is formatted. Playback and the Playback Menu PROTECT Protect pictures from accidental deletion. Highlight one of the following options and press MENU/OK. • FRAME: Protect selected pictures. Press the selector left or right to view pictures and press MENU/OK to select or deselect. Press DISP/BACK when the operation is complete. • SET ALL: Protect all pictures. • RESET ALL: Remove protection from all pictures. 7 187 IMAGE ROTATE Rotate pictures. Playback and the Playback Menu 7 1 2 3 Display the desired picture. 4 Press MENU/OK. The picture will automatically be displayed in the selected orientation whenever it is played back on the camera. Select IMAGE ROTATE in the playback menu. Press the selector down to rotate the picture 90° clockwise, up to rotate it 90° counterclockwise. N Protected pictures can not be rotated. Remove protection before rotating pictures. The camera may not be able to rotate pictures created with other devices. Pictures rotated on the camera will not be rotated when viewed on a computer or on other cameras. Pictures taken with D SCREEN SET-UP > AUTOROTATE PB are automatically displayed in the correct orientation during playback. 188 The Playback Menu RED EYE REMOVAL Remove red-eye from portraits. The camera will analyze the image; if red-eye is detected, the image will be processed to create a copy with reduced red-eye. Display the desired picture. Select RED EYE REMOVAL in the playback menu. Press MENU/OK. N Results vary depending on the scene and the camera’s success in detecting faces. Red eye can not be removed from pictures that have already been processed using red-eye removal, which are indicated by a e icon during playback. The amount of time needed to process the image varies with the number of faces detected. Red eye removal can not be performed on RAW images. 189 Playback and the Playback Menu 1 2 3 7 VOICE MEMO SETTING Add a voice memo to the current photograph. Playback and the Playback Menu 7 1 Select ON for VOICE MEMO SETTING in the playback menu. 2 Display a photo to which you wish to add a voice memo. 3 Press and hold the center of the front command dial to record the memo. Recording ends after 30 s or when you release the dial. N The new memo will be recorded over any existing memos. Deleting the picture also deletes the memo. Voice memos can not be added to movies or protected pictures. Playing Voice Memos Pictures with voice memos are indicated by q icons during playback. To play a memo, select the picture and press the center of the front command dial; a progress bar will be displayed while the memo plays back. Volume can be adjusted by pressing MENU/OK to pause playback and then pressing the selector up or down to adjust the volume. Press MENU/OK again to resume playback. Volume can also be adjusted using D SOUND SET-UP > PLAYBACK VOLUME. 190 The Playback Menu COPY Copy pictures between the cards in the first and second slots. Select COPY in the playback menu. 3 Highlight one of the following options and press MENU/OK: • FRAME: Copy selected pictures. Press the selector left or right to view pictures and press MENU/OK 7 to copy the current picture. ALL • FRAMES: Copy all pictures. Highlight one of the following options and press the selector right: • SLOT1 y SLOT2: Copy pictures from the card in the first slot to the card in the second slot. • SLOT2 y SLOT1: Copy pictures from the card in the second slot to the card in the first slot. O Copying ends when the destination is full. 191 Playback and the Playback Menu 1 2 Playback and the Playback Menu WIRELESS COMMUNICATION Connect to smartphones running the “FUJIFILM Camera Remote” app. The smartphone can be used to browse the images on the camera, download selected images, control the camera remotely, or upload location data to the camera. N For downloads and other information, visit: http://fujifilm-dsc.com/wifi/ 7 192 The Playback Menu N The camera will not turn off automatically while a slide show is in progress. Playback and the Playback Menu SLIDE SHOW View pictures in an automated slide show. Press MENU/OK to start and press the selector right or left to skip ahead or back. Press DISP/BACK at any time during the show to view on-screen help. The show can be ended at any time by pressing MENU/OK. 7 193 PHOTOBOOK ASSIST Create books from your favorite photos. Playback and the Playback Menu Creating a Photobook 1 Select NEW BOOK for C PLAY BACK MENU > PHOTOBOOK ASSIST. 2 Scroll through the images and press the selector up to select or deselect. Press MENU/OK to exit when the book is complete. N Neither photographs a or smaller nor movies can be selected for photobooks. The first picture selected becomes the cover image. Press the selector down to select the current image for the cover instead. 7 3 Highlight COMPLETE PHOTOBOOK and press MENU/OK (to select all photos for the book, choose SELECT ALL). The new book will be added to the list in the photobook assist menu. N Books can contain up to 300 pictures. Books that contain no photos are automatically deleted. Photobooks Photobooks can be copied to a computer using MyFinePix Studio software. 194 The Playback Menu Viewing Photobooks Highlight a book in the photobook assist menu and press MENU/OK to display the book, then press the selector left or right to scroll through the pictures. Playback and the Playback Menu Editing and Deleting Photobooks Display the photobook and press MENU/OK. The following options will be displayed; select the desired option and follow the on-screen instructions. • EDIT: Edit the book as described in “Creating a Photobook”. • ERASE: Delete the book. 7 195 Playback and the Playback Menu PC AUTO SAVE Upload pictures from the camera to a computer running the “FUJIFILM PC AutoSave” application (note that you must first install the software and configure the computer as a destination for images copied from the camera). N For downloads and other information, visit: http://fujifilm-dsc.com/wifi/ 7 196 The Playback Menu PRINT ORDER (DPOF) Create a digital “print order” for DPOF-compatible printers. Select C PLAY BACK MENU > PRINT ORDER (DPOF). 2 Select WITH DATE s to print the date of recording on pictures, WITHOUT DATE to print pictures without dates, or RESET ALL to remove all pictures from the print order before proceeding. 3 Display a picture you wish to include in or remove from the print order. 4 Press the selector up or down to choose the number of copies (up to 99). To remove a picture from the order, press the selector down until the number of copies is 0. 5 6 PRINT ORDER (DPOF) DPOF: 00001 Playback and the Playback Menu 1 7 01 SHEETS FRAME SET Total number of prints Number of copies Repeat steps 3–4 to complete the print order. The total number of prints is displayed in the monitor. Press MENU/OK to exit. 197 N The pictures in the current print order are indicated by a u icon during playback. Print orders can contain a maximum of 999 pictures. Playback and the Playback Menu If a memory card is inserted containing a print order created by another camera, a message will be displayed. Pressing MENU/OK cancels the print order; a new print order must be created as described above. 7 198 The Playback Menu 1 2 Turn the printer on. Select C PLAY BACK MENU > instax PRINTER PRINT. The camera will connect to the printer. PRINTER PRINT instax-12345678 CONNECTING TO PRINTER FUJIFILM-CAMERA-1234 CANCEL N To print a frame from a burst sequence, display the frame before selecting instax PRINTER PRINT. 3 Use the selector to display the picture you want to print, then press MENU/OK. The picture will be sent to the printer and printing will start. 7 PRINTER PRINT 100-0020 TRANSMIT instax-12345678 Playback and the Playback Menu instax PRINTER PRINT To print pictures to optional FUJIFILM instax SHARE printers, first select D CONNECTION SETTING > instax PRINTER CONNECTION SETTING and enter the instax SHARE printer name (SSID) and password, then follow the steps below. CANCEL N Pictures taken with other cameras can not be printed. The area printed is smaller than the area visible in the LCD monitor. 199 The Playback Menu Playback and the Playback Menu 7 DISP ASPECT Choose how High Definition (HD) devices display pictures with an aspect ratio of 3∶2 (this option is available only when an HDMI cable is connected). Select 16∶9 to display the image so that it fills the screen with its top and bottom cropped out, 3∶2 to display the entire image with black bands at either side. 16 : 9 3:2 16∶∶9 16 Display 200 Option 3∶2 The Setup Menus 201 D USER SETTING Adjust basic camera settings. To access basic camera settings, press MENU/OK, select the D (SET UP) tab, and choose USER SETTING. USER SETTING FORMAT DATE/TIME TIME DIFFERENCE MY MENU SETTING SENSOR CLEANING RESET The Setup Menus 8 202 USER SETTING FORMAT To format a memory card: 1 Select D USER SETTING > FORMAT in the D (SET UP) tab. 2 Highlight the slot containing the card you wish to format and press MENU/OK. 3 A confirmation dialog will be displayed. To format the memory card, highlight OK and press MENU/OK. To exit without formatting the memory card, select CANCEL or press DISP/BACK. FORMAT FORMAT CARD IN SLOT 1, OK? ERASE ALL DATA O All data—including protected pictures—will be delet- ed from the memory card. Be sure important files have been copied to a computer or other storage device. Do not open the battery-chamber cover during formatting. N The format menu can also be displayed by pressing the center of the rear command dial while pressing and holding the b button. 203 The Setup Menus OK CANCEL 8 DATE/TIME To set the camera clock: The Setup Menus 1 Select D USER SETTING > DATE/TIME in the D (SET UP) tab. 2 Press the selector left or right to highlight the year, month, day, hour, or minute and press up or down to change. To change the order in which the year, month, and day are displayed, highlight the date format and press the selector up or down. 3 Press MENU/OK to set the clock. 8 204 USER SETTING TIME DIFFERENCE Switch the camera clock instantly from your home time zone to the local time at your destination when traveling. To specify the difference between your local and home time zone: 1 2 Highlight g LOCAL and press MENU/OK. Use the selector to choose the time difference between local time and your home time zone. Press MENU/OK when settings are complete. To set the camera clock to local time, highlight g LOCAL and press MENU/OK. To set the clock to the time in your home time zone, select h HOME. If g LOCAL is selected, g will be displayed in yellow for about three seconds when the camera is turned on. The Setup Menus Options 8 g LOCAL h HOME 205 a Choose a language. The Setup Menus 8 MY MENU SETTING Edit the items listed in the E (MY MENU) tab, a personalized custom menu of frequently-used options. 1 Highlight D USER SETTING > MY MENU SETTING in the D (SET UP) tab and press MENU/OK to display the options at right. 206 MY MENU SETTING ADD ITEMS RANK ITEMS REMOVE ITEMS USER SETTING 2 Press the selector up or down to highlight ADD ITEMS and press MENU/OK. Options that can be added to “my menu” are highlighted in blue. MY MENU SETTING IMAGE SIZE IMAGE QUALITY RAW RECORDING FILM SIMULATION GRAIN EFFECT DYNAMIC RANGE WHITE BALANCE HIGHLIGHT TONE SELECT CANCEL N Items currently in “my menu” are indicated by check marks. 3 Highlight an item and press MENU/OK to add it to “my menu”. MY MENU SETTING 1 IMAGE SIZE 4 5 SAVE Press MENU/OK to return to the edit display. Repeat Steps 3 and 4 until all the desired items have been added. N “My menu” can contain up to 16 items. The Setup Menus MOVE 8 Editing “My Menu” To reorder or delete items, select RANK ITEMS or REMOVE ITEMS in Step 1. 207 SENSOR CLEANING Remove dust from the camera image sensor. • OK: Clean the sensor immediately. • WHEN SWITCHED ON: Sensor cleaning will be performed when the camera is turned on. • WHEN SWITCHED OFF: Sensor cleaning will be performed when the camera turns off (sensor cleaning is not however performed if the camera turns off in playback mode). The Setup Menus N Dust that can not be removed using sensor cleaning can be removed manually. 8 208 USER SETTING RESET Reset shooting or setup menu options to default values. 1 Highlight the desired option and press MENU/OK. Option 2 A confirmation dialog will be displayed; highlight OK and press MENU/OK. The Setup Menus Description Reset all shooting menu settings other than cusSHOOTING tom white balance and custom settings banks MENU RESET created using EDIT/SAVE CUSTOM SETTING to default values. Reset all setup menu settings other than DATE/ SET-UP TIME, TIME DIFFERENCE, and CONNECTION RESET SETTING to default values. 8 209 D SOUND SETTING Make changes to camera sounds. To access sound settings, press MENU/OK, select the D (SET UP) tab, and choose SOUND SET-UP. SOUND SETTING AF BEEP VOL. SELF-TIMER BEEP VOL. OPERATION VOL. HEADPHONES VOLUME SHUTTER VOLUME SHUTTER SOUND PLAYBACK VOLUME The Setup Menus AF BEEP VOL. Choose the volume of the beep that sounds when the camera focuses. The beep can be muted by se8 lecting eOFF. b (high) 210 Options c (medium) d (low) eOFF (mute) SOUND SETTING SELF-TIMER BEEP VOL. Choose the volume of the beep that sounds while the self-timer is active. The beep can be muted by selecting eOFF. b (high) Options c (medium) d (low) eOFF (mute) The Setup Menus OPERATION VOL. Adjust the volume of the sounds produced when camera controls are operated. Choose eOFF to dis8 able control sounds. b (high) Options c (medium) d (low) eOFF (mute) 211 HEADPHONES VOLUME Adjust the volume of headphones connected via a VPB-XT2 power booster grip (available separately). Choose from 10 options between 10 (high) and 1 (low) or select 0 to mute the headphones. 10 9 8 7 6 Options 5 4 3 2 1 0 The Setup Menus SHUTTER VOLUME Adjust the volume of the sounds produced by the electronic shutter. Choose eOFF to disable the shut8 ter sound. b (high) 212 Options c (medium) d (low) eOFF (mute) SOUND SETTING SHUTTER SOUND Choose the sound made by the electronic shutter. Options j i k The Setup Menus PLAYBACK VOLUME Adjust the volume for movie playback. Choose from 10 options between 10 (high) and 1 (low) or select 0 8 to mute audio during movie playback. 10 9 8 7 6 Options 5 4 3 2 1 0 213 D SCREEN SETTING Make changes to display settings. To access display settings, press MENU/OK, select the D (SET UP) tab, and choose SCREEN SET-UP. SCREEN SETTING EVF BRIGHTNESS EVF COLOR LCD BRIGHTNESS LCD COLOR IMAGE DISP. AUTOROTATE DISPLAYS PREVIEW EXP./WB IN MANUAL MODE PREVIEW PIC. EFFECT The Setup Menus EVF BRIGHTNESS Adjust the brightness of the display in the electronic viewfinder. Select MANUAL to choose from 13 op8 tions from +5 (bright) to −7 (dark), or select AUTO for automatic brightness adjustment. Options MANUAL 214 AUTO SCREEN SETTING EVF COLOR Adjust the hue of the display in the electronic viewfinder. Choose from 11 options between +5 and −5. +5 +4 +3 +2 +1 Options 0 −1 −2 −3 −4 −5 +5 +4 +3 +2 Options +1 0 −1 −2 −3 −4 −5 215 The Setup Menus LCD BRIGHTNESS Adjust monitor brightness. Choose from 11 options between +5 and −5. 8 LCD COLOR Adjust monitor hue. Choose from 11 options between +5 and −5. +5 +4 +3 +2 +1 Options 0 −1 −2 −3 −4 −5 The Setup Menus IMAGE DISP. Choose how long images are displayed after shooting. Colors may differ slightly from those in the final image 8 and “noise” mottling may be visible at high sensitivities. Option Description Pictures are displayed until the MENU/OK button is pressed or the shutter button is pressed halfway. To CONTINUOUS zoom in on the active focus point, press the center of the rear command dial; press again to cancel zoom. 1.5 SEC Pictures are displayed for the selected time or until the 0.5 SEC shutter button is pressed halfway. OFF Pictures are not displayed after shooting. 216 SCREEN SETTING AUTOROTATE DISPLAYS Choose whether the indicators in the viewfinder and LCD monitor rotate to match camera orientation. Options ON OFF The Setup Menus PREVIEW EXP./WB IN MANUAL MODE Select PREVIEW EXP./WB to enable exposure and white balance preview in manual exposure mode, or choose PREVIEW WB to preview only white balance. 8 Select OFF when using a flash or on other occasions on which exposure may change when the picture is taken. PREVIEW EXP./WB Options PREVIEW WB OFF 217 PREVIEW PIC. EFFECT Choose ON to preview the effects of film simulation, white balance, and other settings in the monitor, OFF to make shadows in low-contrast, back-lit scenes and other hard-to-see subjects more visible. Options ON OFF N If OFF is selected, the effects of camera settings will not The Setup Menus be visible in the monitor and colors and tone will differ from those in the final picture. The display will however be adjusted to show the effects of advanced filters and of monochrome and sepia settings. 8 218 SCREEN SETTING FRAMING GUIDELINE Choose a framing grid for shooting mode. Option G GRID 24 F GRID 9 Display P P P For “rule of thirds” composition. H HD FRAMING A six-by-four grid. N Framing guides are not shown at default settings but can be displayed using D SCREEN SET-UP > DISP. CUSTOM SETTING (P 221). The Setup Menus Frame HD pictures in the crop shown by the lines at the top and bottom of the display. 8 219 AUTOROTATE PB Choose ON to automatically rotate “tall” (portrait-orientation) pictures during playback. Options ON The Setup Menus 8 OFF FOCUS SCALE UNITS Choose the units used for the focus distance indicator. Options METERS 220 FEET SCREEN SETTING DUAL DISPLAY SETTING Choose the content of the two windows in the dual display. Option Description The right (small) window shows a close-up of the R:FOCUS focus area, while the left (large) window shows the L:FRAME entire frame. The right (small) window shows the entire frame, R:FRAME while the left (large) window shows a close-up of the L:FOCUS focus area. The Setup Menus DISP. CUSTOM SETTING Choose the items shown in the standard display. 1 In shooting mode, press DISP/BACK until standard 8 indicators are displayed. 2 Press MENU/OK and select D SCREEN SET-UP > DISP. CUSTOM SETTING in the D (SET UP) tab. 221 SCREEN SETTING 3 Item Default w FRAMING GUIDELINE w ELECTRONIC LEVEL R FOCUS FRAME w AF DISTANCE INDICATOR R MF DISTANCE INDICATOR w HISTOGRAM R SHOOTING MODE R APERTURE/S-SPEED/ISO INFORMATION BACKGROUND R w Expo. Comp. (Digit) Expo. Comp. (Scale) R R FOCUS MODE R PHOTOMETRY R SHUTTER TYPE The Setup Menus 8 Highlight items and press MENU/OK to select or deselect. 4 5 Item FLASH CONTINUOUS MODE DUAL IS MODE WHITE BALANCE FILM SIMULATION DYNAMIC RANGE BOOST MODE FRAMES REMAINING IMAGE SIZE/QUALITY MOVIE MODE & REC. TIME MIC LEVEL BATTERY LEVEL FRAMING OUTLINE Default R R R R R R R R R R R R w Press DISP/BACK to save changes. Press DISP/BACK as needed to exit the menus and return to the shooting display. 222 D BUTTON/DIAL SETTING Access options for camera controls. To access control options, press MENU/OK, select the D (SET UP) tab, and choose BUTTON/DIAL SETTING. BUTTON/DIAL SETTING FOUCS LEVER SETTING EDIT/SAVE QUICK MENU Fn/AE-L/AF-L BUTTON SETTING SELECTOR BUTTON SETTING COMMAND DIAL SETTING S.S. OPERATION ISO DIAL SETTING (H) ISO DIAL SETTING (L) Option Description LOCK (OFF) The focus stick can not be used during shooting. PUSH n TO Press the stick to view the focus-point display and tilt UNLOCK the stick to select a focus point. Tilt the stick to view the focus-point display and select ON a focus point. 223 The Setup Menus FOCUS LEVER SETTING Choose the functions performed by the focus stick (focus lever). 8 EDIT/SAVE QUICK MENU Choose the items displayed in the quick menu. The Setup Menus 8 1 Select D BUTTON/DIAL SETTING > EDIT/SAVE QUICK MENU in the D (SET UP) tab. 2 The current quick menu will be displayed; use the selector to highlight the item you wish to change and press MENU/OK. 3 Highlight any of the following options and press MENU/OK to assign it to the selected position. • IMAGE SIZE • IMAGE QUALITY • FILM SIMULATION • GRAIN EFFECT • DYNAMIC RANGE • WHITE BALANCE • HIGHLIGHT TONE • SHADOW TONE • COLOR • SHARPNESS • NOISE REDUCTION • SELECT CUSTOM SETTING • AF MODE * * * * * * * * * * * Stored in custom settings bank. 224 • AF-C CUSTOM SETTINGS • FACE/EYE DETECTION SETTING • MF ASSIST • SELF-TIMER • SHUTTER TYPE • FLASH FUNCTION SETTING • FLASH COMPENSATION • MOVIE MODE • MIC LEVEL ADJUSTMENT • EVF/LCD BRIGHTNESS • EVF/LCD COLOR • NONE BUTTON/DIAL SETTING N 4 Select NONE to assign no option to the selected position. When SELECT CUSTOM SETTING is selected, current settings are shown in the quick menu by the label BASE. Highlight the desired item and press MENU/OK to assign it to the selected position. N The quick menu can also be accessed in shooting mode by holding the Q button. The Setup Menus 8 225 Fn/AE-L/AF-L BUTTON SETTING Choose the roles played by the function buttons. The Setup Menus 8 1 Select D BUTTON/DIAL SETTING > Fn/AE-L/ AF-L BUTTON SETTING in the D (SET UP) tab. 2 3 Highlight the desired control and press MENU/OK. Highlight any of the following options and press MENU/OK to assign it to the selected control. • IMAGE SIZE • IMAGE QUALITY • RAW • FILM SIMULATION • GRAIN EFFECT • DYNAMIC RANGE • WHITE BALANCE • SELECT CUSTOM SETTING • FOCUS AREA • FOCUS CHECK • AF MODE • AF-C CUSTOM SETTINGS • FACE/EYE DETECTION SETTING • DRIVE SETTING • SELF-TIMER • SHUTTER TYPE • ISO AUTO SETTING 226 • WIRELESS COMMUNICATION • FLASH FUNCTION SETTING • TTL-LOCK • MODELING FLASH • MIC LEVEL ADJUSTMENT • PREVIEW DEPTH OF FIELD • PREVIEW EXP./WB IN MANUAL MODE • PREVIEW PIC. EFFECT • AE LOCK ONLY • AF LOCK ONLY • AE/AF LOCK • AF-ON • APERTURE SETTING • LOCK SETTING • PERFORMANCE • PLAYBACK • NONE (control disabled) BUTTON/DIAL SETTING N Function button assignment options can also be accessed by holding the DISP/BACK button. The selector can not be assigned more than one role at a time. AF-ON If AF-ON is selected, you can press the control instead of keeping the shutter button pressed halfway. MODELING FLASH If MODELING FLASH is selected, you can press the control to test-fire the flash (modeling flash). The Setup Menus TTL-LOCK If TTL-LOCK is selected, you can press the control to lock flash output according to the option selected for F FLASH SETTING > TTL-LOCK MODE (P 164). 8 227 SELECTOR BUTTON SETTING Choose the roles played by the up, down, left, and right buttons on the selector. Option Description Fn BUTTON The selector buttons serve as function buttons. The selector buttons can be used to position the focus FOCUS AREA area. N Selecting FOCUS AREA prevents you accessing the functions assigned to the function buttons. The Setup Menus 8 COMMAND DIAL SETTING Choose the roles played by the command dials. Option Description The front command dial controls aperture, the rear Y F X S.S. command dial shutter speed. The front command dial controls shutter speed, the Y S.S. X F rear command dial aperture. 228 BUTTON/DIAL SETTING o S.S. OPERATION Select OFF to disable shutter-speed fine-tuning using the command dials. Options ON OFF Options 25600 51200 229 The Setup Menus ISO DIAL SETTING (H) Choose the ISO sensitivity assigned to the H position on the sensitivity dial. 8 ISO DIAL SETTING (L) Choose the ISO sensitivity assigned to the L position on the sensitivity dial. 100 The Setup Menus 8 Options 125 160 ISO DIAL SETTING (A) Choose how sensitivity is adjusted when the sensitivity dial is rotated to A. Option Description Sensitivity is automatically adjusted in response to shooting conditions according to option chosen for AUTO A SHOOTING SETTING > ISO AUTO SETTING. Choose from AUTO1, AUTO2, and AUTO3. Sensitivity is adjusted manually by rotating the front COMMAND command dial. 230 BUTTON/DIAL SETTING SHUTTER AF Choose whether the camera focuses when the shutter button is pressed halfway. Option Description • ON: Focus locks when the shutter button is pressed AF-S halfway. • OFF: No focus operation is performed when the shutter button is pressed halfway. • ON: The camera focuses while the shutter button is AF-C pressed halfway. shutter button is pressed halfway. The Setup Menus • OFF: No focus operation is performed when the 8 231 SHUTTER AE If ON is selected, exposure will lock while the shutter button is pressed halfway. Option Description Exposure locks when the shutter button is pressed halfway. • OFF: Exposure does not lock when the shutter button is pressed halfway. • ON: Exposure locks while the shutter button is pressed halfway. • OFF: Exposure does not lock when the shutter button is pressed halfway. • ON: AF-S/MF AF-C The Setup Menus N Select OFF to allow the camera to adjust exposure before each shot taken in burst mode. 8 232 BUTTON/DIAL SETTING SHOOT WITHOUT LENS Choose ON to enable the shutter release when no lens is attached. Options ON OFF Option ON OFF Description When no memory card is inserted, the shutter can be released to test camera function and the shooting and setup menus can be displayed. The shutter is disabled if no memory card is inserted, preventing accidental loss of pictures taken without a memory card. 233 The Setup Menus SHOOT WITHOUT CARD Choose whether the shutter can be released without a memory card inserted in the camera. 8 FOCUS RING Choose the direction in which the focus ring is rotated to increase the focus distance. Options X CW (clockwise) Y CCW (counterclockwise) The Setup Menus AE/AF-LOCK MODE If AE & AF ON WHEN PRESSING is selected, exposure and/or focus will lock while the AE-L or AF-L button 8 is pressed. If AE & AF ON/OFF SWITCH is selected, exposure and/or focus will lock when the AE-L or AF-L button is pressed and remain locked until the button is pressed again. Options AE & AF ON WHEN PRESSING 234 AE & AF ON/OFF SWITCH BUTTON/DIAL SETTING APERTURE SETTING Choose the method used to adjust aperture when using lenses with no aperture rings. The Setup Menus Option Description AUTO + Rotate the front command dial to choose the aperture. o MANUAL Rotate past minimum aperture to choose A (auto). Aperture is selected automatically; camera functions AUTO in exposure mode P (program AE) or S (shutter-priority AE). Rotate the front command dial to choose the aperMANUAL ture; camera functions in exposure mode A (aperture-priority AE) or M (manual). 8 235 BUTTON/DIAL SETTING LOCK Lock selected controls to prevent unintended operation. Option The Setup Menus Description Choose from the following: • UNLOCK: Reset lock options. ALL FUNCTION: Lock all controls in the LOCK SETTING • FUNCTION SELECTION list. • SELECTED FUNCTION: Lock only the controls selected in the FUNCTION SELECTION list. FUNCTION Choose the controls locked when SELECTED SELECTION FUNCTION is chosen for LOCK SETTING. N The selector and the Q button can be locked at any time by pressing and holding the MENU/OK button (P 4). 8 236 D POWER MANAGEMENT Adjust power management settings. To access power management settings, press MENU/OK, select the D (SET UP) tab, and choose POWER MANAGEMENT. POWER MANAGEMENT AUTO POWER OFF PERFORMANCE The Setup Menus AUTO POWER OFF Choose the length of time before the camera turns off automatically when no operations are performed. Shorter times increase battery life; if OFF is selected, 8 the camera must be turned off manually. 5 MIN 2 MIN Options 1 MIN 30 SEC 15 SEC OFF 237 POWER MANAGEMENT PERFORMANCE Select BOOST to improve focus and viewfinder display performance. Option BOOST NORMAL The Setup Menus 8 238 AF performance Viewfinder Viewfinder frame (speed) display quality rate (approx.) Fast High 100 fps Normal Normal 60 fps D SAVE DATA SETTING Make changes to file management settings. To access file management settings, press MENU/OK, select the D (SET UP) tab, and choose SAVE DATA SET-UP. SAVE DATA SETTING FRAME NO. SAVE ORG IMAGE EDIT FILE NAME CARD SLOT SETTING (STILL IMAGE) SWITCH SLOT (SEQUENTIAL) MOVIE FILE DESTINATION COPYRIGHT INFO The Setup Menus FRAME NO. Frame number New pictures are stored in image files named using a four-digit file number assigned by adding one File to the last file number used. The Directory number number file number is displayed during playback as shown. FRAME NO. controls whether file numbering is reset to 0001 when a new memory card is inserted or the current memory card is formatted. 8 Option Description Numbering continues from the last file number used or the first available file number, whichever is higher. CONTINUOUS Choose this option to reduce the number of pictures with duplicate file names. Numbering is reset to 0001 after formatting or when a RENEW new memory card is inserted. 239 N If the frame number reaches 999-9999, the shutter re- lease will be disabled. Format the memory card after transferring to a computer any pictures you wish to keep. Selecting D USER SETTING > RESET sets FRAME NO. to CONTINUOUS but does not reset the file number. Frame numbers for pictures taken with other cameras may differ. The Setup Menus 8 SAVE ORG IMAGE Choose ON to save unprocessed copies of pictures taken using RED EYE REMOVAL. Options ON 240 OFF SAVE DATA SETTING EDIT FILE NAME Change the file name prefix. sRGB images use a four-letter prefix (default “DSCF”), Adobe RGB images a three-letter prefix (“DSF”) preceded by an underscore. Option sRGB Adobe RGB Default prefix DSCF _DSF Sample file name ABCD0001 _ABC0001 Option Description The card in the second slot is used only when the card SEQUENTIAL in the first slot is full. BACKUP Each picture is recorded twice, once to each card. As for SEQUENTIAL, except that the RAW copy of pictures taken with FINE + RAW or NORMAL + RAW RAW/JPEG selected for H IMAGE QUALITY SETTING > IMAGE QUALITY will be saved to the card in the first slot and the JPEG copy to the card in the second slot. 241 The Setup Menus CARD SLOT SETTING (STILL IMAGE) Choose the role played by the card in the second slot. 8 SWITCH SLOT (SEQUENTIAL) Choose the card that is recorded to first when SEQUENTIAL is selected for CARD SLOT SETTING (STILL IMAGE). Options SLOT 1 SLOT 2 The Setup Menus MOVIE FILE DESTINATION Choose the slot used to store movies. Options 8 SLOT 1 242 SLOT 2 SAVE DATA SETTING COPYRIGHT INFO Copyright information, in the form of Exif tags, can be added to new images as they are taken. Changes to copyright information are reflected only in images taken after the changes are made. The Setup Menus Option Description DISP COPYRIGHT INFO View the current copyright information. ENTER AUTHOR’S INFO Enter the creator’s name. ENTER COPYRIGHT INFO Enter the name of the copyright holder. Delete the current copyright information. This change applies only to images taken DELETE COPYRIGHT INFO after this option is selected; copyright information recorded with existing images is not affected. 8 243 D CONNECTION SETTING Adjust settings for connection to other devices. To access connection settings, press MENU/OK, select the D (SET UP) tab, and choose CONNECTION SETTING. The Setup Menus 8 CONNECTION SETTING WIRELESS SETTINGS PC AUTO SAVE SETTING GEOTAGGING SET-UP PRINTER CONNECTION SETTING PC SHOOT MODE INFORMATION WIRELESS SETTINGS Adjust settings for connection to wireless networks. Option Description Choose a name (NAME) to identify the camera on the GENERAL wireless network (the camera is assigned a unique name SETTINGS by default) or select RESET WIRELESS SETTINGS to restore default settings. Choose ON (the default setting, recommended in most circumstances) to resize larger images to H RESIZE IMAGE FOR for upload to smartphones, OFF to upload images SMARTPHONE at their original size. Resizing applies only to the H copy uploaded to the smartphone; the original is not affected. Choose DELETE REGISTERED DESTINATION PC AUTO SAVE PC to remove selected destinations, DETAILS OF SETTINGS PREVIOUS CONNECTION to view computers to which the camera has recently connected. 244 CONNECTION SETTING Option Description • SIMPLE SETUP: Connect to an access point using simple settings. ACCESS POINT • MANUAL SETUP: Manually adjust settings for connection to a wireless network. Choose the SETTINGS network from a list (SELECT FROM NETWORK LIST) or enter the name manually (ENTER SSID). • AUTO: The IP address is assigned automatically. • MANUAL: Assign an IP address manually. Manually IP choose the IP address (IP ADDRESS), network mask ADDRESS (NETMASK), and gateway address (GATEWAY ADDRESS). Option Description SIMPLE SETUP Connect using WPS. Choose the network from a list (SELECT FROM MANUAL SETUP NETWORK LIST) or enter the name manually (ENTER SSID). N For more information on wireless connections, visit: http://fujifilm-dsc.com/wifi/ 245 The Setup Menus PC AUTO SAVE SETTING Choose the method used for connection to computers via a wireless LAN. 8 GEOTAGGING SET-UP View location data downloaded from a smartphone and choose whether to save the data with your pictures. Option Description Choose whether location data downloaded from a GEOTAGsmartphone are embedded in pictures as they are GING taken. LOCATION Display the location data last downloaded from a INFO smartphone. The Setup Menus 8 N For more information on wireless connections, visit: http://fujifilm-dsc.com/wifi/ instax PRINTER CONNECTION SETTING Adjust settings for connection to optional FUJIFILM instax SHARE printers. The Printer Name (SSID) and Password The printer name (SSID) can be found on the bottom of the printer; the default password is “1111”. If you have already chosen a different password to print from a smartphone, enter that password instead. 246 CONNECTION SETTING PC SHOOT MODE Adjust settings for remote photography (tethered shooting). Option O D POWER MANAGEMENT > AUTO POWER OFF also apply during tethered shooting. Select OFF to prevent the camera turning off automatically. N Tethered shooting is available with software such as HS-V5 (available separately) or FUJIFILM X Acquire (available for free download from the FUJIFILM website) or when the FUJIFILM Tether Shooting Plug-in PRO or Tether Shooting Plug-in (both available separately) is used with Adobe® Photoshop® Lightroom®. 247 The Setup Menus Description Choose this option if you do not intend to use tethered OFF shooting. Tethered shooting mode is selected automatically when USB AUTO the camera is connected to a computer via USB. When no computer is connected, the results are the same as OFF. The camera functions in tethered shooting mode even when not connected to a computer. At default settings, USB FIXED pictures are not saved to the memory card, but pictures taken while the camera is not connected will be transferred to the computer when it is connected. Choose this option for wireless remote photography. WIRELESS Select a network using D CONNECTION SETTING > FIXED WIRELESS SETTINGS. 8 CONNECTION SETTING INFORMATION View the camera’s MAC address. The Setup Menus 8 248 Shortcuts 249 Shortcut Options Customize camera controls to suit your style or situation. Shortcuts Frequently-used options can be added to the Q menu or a custom “my” menu or assigned to an Fn (function) button for direct access: • The Q menu (P 251): The Q menu is displayed by pressing the Q button. Use the Q menu to view or change the options selected for frequently-used menu items. • “My menu” (P 260): Add frequently-used options to this custom menu, which can be viewed by pressing MENU/OK and selecting the E (“MY MENU”) tab. • The function buttons (P 256): Use the function buttons for direct access to selected features. 9 250 The Q (Quick Menu) Button Press Q for quick access to selected options. The Quick Menu Display At default settings, the quick menu contains the following items: SELECT CUSTOM SETTING BASE SET Shortcuts A SELECT CUSTOM SETTING B AF MODE C DYNAMIC RANGE D WHITE BALANCE E NOISE REDUCTION F IMAGE SIZE G IMAGE QUALITY H FILM SIMULATION I HIGHLIGHT TONE J SHADOW TONE K COLOR L SHARPNESS M SELF-TIMER N FACE/EYE DETECTION 9 SETTING O FLASH FUNCTION SETTING P EVF/LCD BRIGHTNESS 251 The quick menu shows the options currently selected for items B–P, which can be changed as described on page 254. SELECT CUSTOM SETTING The H IMAGE QUALITY SETTING > SELECT CUSTOM SETTING item (item A) shows the current custom settings bank: • q: No custom settings bank selected. • t–u: Select a bank to view the settings saved using the H IMAGE QUALITY SETTING > EDIT/SAVE CUSTOM SETTING option. • r–s: The current custom settings bank. Shortcuts 9 252 The Q (Quick Menu) Button Viewing and Changing Settings 1 Press Q to display the quick menu during shooting. 2 Use the selector to highlight items and rotate the rear command dial to change. N Changes are not saved to the SELECT CUSTOM SETTING BASE SET current settings bank. Settings that differ from those in the current settings bank (t– u) are shown in red. Shortcuts 3 Press Q to exit when settings are complete. 9 253 Editing the Quick Menu To choose the items displayed in the quick menu: Shortcuts 9 1 Press and hold the Q button during shooting. 2 The current quick menu will be displayed; use the selector to highlight the item you wish to change and press MENU/OK. 3 Highlight any of the following options and press MENU/OK to assign it to the selected position. • IMAGE SIZE • IMAGE QUALITY • FILM SIMULATION • GRAIN EFFECT • DYNAMIC RANGE • WHITE BALANCE • HIGHLIGHT TONE • SHADOW TONE • COLOR • SHARPNESS • NOISE REDUCTION • SELECT CUSTOM SETTING • AF MODE * * * * * * * * * * * Stored in custom settings bank. 254 • AF-C CUSTOM SETTINGS • FACE/EYE DETECTION SETTING • MF ASSIST • SELF-TIMER • SHUTTER TYPE • FLASH FUNCTION SETTING • FLASH COMPENSATION • MOVIE MODE • MIC LEVEL ADJUSTMENT • EVF/LCD BRIGHTNESS • EVF/LCD COLOR • NONE The Q (Quick Menu) Button N Select NONE to assign no option to the selected position. When SELECT CUSTOM SETTING is selected, current settings are shown in the quick menu by the label BASE. N The quick menu can also be edited using D BUTTON/ DIAL SETTING > EDIT/SAVE QUICK MENU. Shortcuts 9 255 The Fn (Function) Buttons Assign roles to AE-L, AF-L, and function buttons for quick access to selected features. The default assignments are: Fn2 button Face/eye detection settings Drive settings Fn3 button Fn4 button AF mode Film simulation Fn5 button Fn6 button White balance Performance Shortcuts Fn1 button 9 256 The Fn (Function) Buttons AE-L button AF-L button Exposure lock Focus lock Center of rear command dial Focus check Shortcuts 9 257 Assigning Roles to the Function Buttons To assign roles to the buttons: Shortcuts 9 1 Press and hold the DISP/BACK button until a button selection menu is displayed. 2 3 Highlight a button and press MENU/OK. Highlight the desired role and press MENU/OK to assign it to the selected button. Choose from: • IMAGE SIZE • IMAGE QUALITY • RAW • FILM SIMULATION • GRAIN EFFECT • DYNAMIC RANGE • WHITE BALANCE • SELECT CUSTOM SETTING • FOCUS AREA • FOCUS CHECK • AF MODE • AF-C CUSTOM SETTINGS • FACE/EYE DETECTION SETTING • DRIVE SETTING • SELF-TIMER • SHUTTER TYPE • ISO AUTO SETTING 258 • WIRELESS COMMUNICATION • FLASH FUNCTION SETTING • TTL-LOCK • MODELING FLASH • MIC LEVEL ADJUSTMENT • PREVIEW DEPTH OF FIELD • PREVIEW EXP./WB IN MANUAL MODE • PREVIEW PIC. EFFECT • AE LOCK ONLY • AF LOCK ONLY • AE/AF LOCK • AF-ON • APERTURE SETTING • LOCK SETTING • PERFORMANCE • PLAYBACK • NONE (control disabled) The Fn (Function) Buttons N Button assignments can also be selected using D BUTTON/DIAL SETTING > Fn/AE-L/AF-L BUTTON SETTING. The selector can not be assigned more than one role at a time. AF-ON If AF-ON is selected, you can press the control instead of keeping the shutter button pressed halfway. MODELING FLASH If MODELING FLASH is selected, you can press the control to test-fire the flash (modeling flash). Shortcuts TTL-LOCK If TTL-LOCK is selected, you can press the control to lock flash output according to the option selected for F FLASH SETTING > TTL-LOCK MODE (P 164). 9 259 E MY MENU Access a personalized menu of frequently-used options. To display “my menu”, press MENU/OK in the shooting display and select the E (MY MENU) tab. MY MENU SELF-TIMER INTERVAL TIMER SHOOTING FILM SIMULATION GRAIN EFFECT SHUTTER TYPE IS MODE FACE/EYE DETECTION SETTING ISO AUTO SETTING EXIT N The E tab is only available if options have been assigned to MY MENU. MY MENU SETTING To choose the items listed in the E (MY MENU) tab: Shortcuts 9 1 2 Highlight D USER SETTING > MY MENU SETTING in the D (SET UP) tab and press MENU/OK to display the options at right. MY MENU SETTING Press the selector up or down to highlight ADD ITEMS and press MENU/OK. Options that can be added to “my menu” are highlighted in blue. MY MENU SETTING ADD ITEMS RANK ITEMS REMOVE ITEMS IMAGE SIZE IMAGE QUALITY RAW RECORDING FILM SIMULATION GRAIN EFFECT DYNAMIC RANGE WHITE BALANCE HIGHLIGHT TONE SELECT CANCEL N Items currently in “my menu” are indicated by check marks. 260 MY MENU 3 Press MENU/OK to return to the edit display. MY MENU SETTING 1 IMAGE SIZE MOVE 4 SAVE Repeat Steps 3 and 4 until all the desired items have been added. N “My menu” can contain up to 16 items. Editing “My Menu” To reorder or delete items, select RANK ITEMS or REMOVE ITEMS in Step 1. Shortcuts 9 261 MEMO 262 Peripherals and Optional Accessories 263 External Flash Units Flash units can be mounted on the hot shoe or connected via the sync terminal. Peripherals and Optional Accessories Optional external flash units are more powerful than the EF-X8 supplied with the camera. Some support high-speed sync (FP) and can be used at shutter speeds faster than the flash sync speed, while others can function as master flash units controlling remote units via optical wireless flash control. O You may be unable to test-fire the flash in some circum- stances, for example when a setup menu is displayed on the camera. 10 264 External Flash Units Flash Settings To adjust settings for a flash unit mounted on the hot shoe or connected via the sync terminal: 1 2 Connect the unit to the camera. FLASH SETTING FLASH FUNCTION SETTING RED EYE REMOVAL TTL-LOCK MODE LED LIGHT SETTING MASTER SETTING CH SETTING EXIT Description P Available with units connected via the sync SYNC terminal and with third-party and other units 267 TERMINAL that use only the X-contact on the hot shoe. Also displayed if no flash unit is connected. SUPPLIED Displayed when the supplied EF-X8 flash unit 269 FLASH is mounted on the hot shoe and raised. SHOE Displayed when an optional flash unit is MOUNT 271 mounted on the hot shoe and turned on. FLASH Displayed if an optional flash unit functioning as MASTER a master flash for FUJIFILM optical wireless re- 275 (OPTICAL) mote flash control is connected and turned on. Menu O SYNC TERMINAL will be also displayed if the EF-X8 is attached but not raised. 265 Peripherals and Optional Accessories In shooting mode, select FLASH FUNCTION SETTING in the F (FLASH SETTING) menu tab. The options available vary with the flash unit. 10 3 Highlight items using the selector and rotate the rear command dial to change the highlighted setting. 4 Press DISP/BACK to put the changes into effect. MODE SUPPLIED FLASH ADJUST END Peripherals and Optional Accessories Red-Eye Removal Red-eye removal is available when an option other than OFF is selected for F FLASH SETTING > RED EYE REMOVAL and G AF/MF SETTING > FACE/EYE DETECTION SETTING is ON. Red-eye removal minimizes “red-eye” caused when light from the flash is reflected from the subject’s retinas. 10 266 External Flash Units SYNC TERMINAL The following options are available when a flash unit is connected via the sync terminal. MODE SYNC TERMINAL ADJUST END Setting Peripherals and Optional Accessories Description Choose from the following options: • M: A trigger signal is transmitted from the sync terminal and hot shoe when a picture is taken. Choose a shutter A Flash speed slower than the sync speed; even slower speeds control may be required if the unit uses long flashes or has a mode slow response time. • D (OFF): The sync terminal and hot shoe do not transmit a trigger signal. Choose whether the flash is timed to fire immediately after the shutter opens (H/1ST CURTAIN) or immediately B Sync before it closes (I/2ND CURTAIN). 1ST CURTAIN is recommended in most circumstances. 10 267 The Sync Terminal Use the sync terminal to connect flash units that require a sync cable. Peripherals and Optional Accessories 10 268 External Flash Units SUPPLIED FLASH The following options are available with the supplied EF-X8 shoe-mounted flash unit. MODE SUPPLIED FLASH ADJUST END Setting 269 Peripherals and Optional Accessories Description Choose from the following options: • TTL: TTL mode. Adjust flash compensation (B) and choose a flash mode (C). • M: The flash fires at the selected output (B) regardless of subject brightness or camera settings. Output is expressed in fractions of full power, from ⁄ to ⁄. The desired results may not be achieved at low values if they exceed the limits A Flash control of the flash control system; take a test shot and check the results. mode • C (COMMANDER): Choose if the flash is being used to control remote synced flash units, for example as part of a studio flash system. • D (OFF): The flash does not fire. Flash units connected via the sync terminal will still fire when the shutter is released, but can be disabled by lowering the EF-X8 and turning the units off in the flash settings menu. B Flash compen- Adjust flash level. The options available vary with sation/output the flash control mode (A). 10 Setting C Flash mode Peripherals and Optional Accessories (TTL) D Sync 10 270 Description Choose a flash mode for TTL flash control. The options available vary with the shooting mode (P, S, A, or M) selected. • E (FLASH AUTO): The flash fires only as required; flash level is adjusted according to subject brightness. A p icon displayed when the shutter button is pressed halfway indicates that the flash will fire when the photo is taken. • F (STANDARD): The flash fires with every shot if possible; flash level is adjusted according to subject brightness. The flash will not fire if not fully charged when the shutter is released. • G (SLOW SYNC.): Combine the flash with slow shutter speeds when photographing portrait subjects against a backdrop of night scenery. The flash will not fire if not fully charged when the shutter is released. Choose whether the flash is timed to fire immediately after the shutter opens (H/1ST CURTAIN) or immediately before it closes (I/2ND CURTAIN). 1ST CURTAIN is recommended in most circumstances. External Flash Units SHOE MOUNT FLASH The following options are available when an optional shoe-mounted flash unit is attached and turned on. MODE SHOE MOUNT FLASH ADJUST Setting mode Description The flash control mode selected with the flash unit. This can in some cases be adjusted from the camera; the options available vary with the flash. • TTL: TTL mode. Adjust flash compensation (B). • M: The flash fires at the selected output regardless of subject brightness or camera settings. Output in some cases can be adjusted from the camera (B). • MULTI: Repeating flash. Compatible shoe-mounted flash units will fire multiple times with each shot. • D (OFF): The flash does not fire. Some flash units can be turned off from the camera. Peripherals and Optional Accessories A Flash control END 10 271 Setting Peripherals and Optional Accessories Description The options available vary with flash control mode. • TTL: Adjust flash compensation (the full value may not be applied if the limits of the flash control system are exceeded). In the cases of the EF-X20, EF-20, and EF-42, the selected value is added to the value selected with the flash unit. B Flash compen- • M/MULTI: Adjust flash output (compatible units sation/output only). Choose from values expressed as fractions of full power, from ⁄ (mode M) or ¼ (MULTI) down to ⁄ in increments equivalent to ⁄ EV. The desired results may not be achieved at low values if they exceed the limits of the flash control system; take a test shot and check the results. 10 272 External Flash Units Setting C Flash mode D Sync 273 Peripherals and Optional Accessories (TTL) Description Choose a flash mode for TTL flash control. The options available vary with the shooting mode (P, S, A, or M) selected. • E (FLASH AUTO): The flash fires only as required; flash level is adjusted according to subject brightness. A p icon displayed when the shutter button is pressed halfway indicates that the flash will fire when the photo is taken. • F (STANDARD): The flash fires with every shot if possible; flash level is adjusted according to subject brightness. The flash will not fire if not fully charged when the shutter is released. • G (SLOW SYNC.): Combine the flash with slow shutter speeds when photographing portrait subjects against a backdrop of night scenery. The flash will not fire if not fully charged when the shutter is released. Control flash timing. • H (1ST CURTAIN): The flash fires immediately after the shutter opens (generally the best choice). • I (2ND CURTAIN): The flash fires immediately before the shutter closes. • R (AUTO FP(HSS)): High-speed sync (compatible units only). The camera automatically engages front-curtain high-speed sync at shutter speeds faster than the flash sync speed. Equivalent to 1ST CURTAIN when MULTI is selected for flash control mode. 10 Setting Peripherals and Optional Accessories 10 Description The angle of illumination (flash coverage) for units that support flash zoom. Some units allow the adjustment to be made from the camera. If AUTO is E Zoom selected, zoom will automatically be adjusted to match coverage to lens focal length. If the unit supports this feature, choose from: • J (FLASH POWER PRIORITY): Gain range by slightly reducing coverage. F Lighting • K (STANDARD): Match coverage to picture angle. • L (EVEN COVERAGE PRIORITY): Slightly increase coverage for more even lighting. Choose how the built-in LED light functions during still photography (compatible units only): as a catchlight (M/CATCHLIGHT), as an AF-assist illumiG LED light nator (N/AF ASSIST), or as both a catchlight and an AF-ASSIST illuminator (O/AF ASSIST+CATCHLIGHT). Choose OFF to disable the LED during photography. G Number of Choose the number of times the flash fires each flashes * time the shutter is released in MULTI mode. Choose the frequency at which the flash fires in H Frequency * MULTI mode. * Full value may not be applied if limits of flash control system are exceeded. 274 External Flash Units MASTER(OPTICAL) The options at right will be displayed if the unit is currently functioning as master flash for FUJIFILM optical wireless remote flash control. MODE MASTER(OPTICAL) ADJUST END Peripherals and Optional Accessories The master and remote units can be placed in up to three C groups (A, B, and C) and flash A mode and flash level adjusted separately for each group. B Four channels are available for communication between the units; separate channels can be used for different flash systems or to prevent interference when multiple systems are operating in close proximity. 10 275 Setting A Flash control mode (group A) B Flash control Peripherals and Optional Accessories mode (group B) C Flash control mode (group C) 10 276 Description Choose flash control modes for groups A, B, and C. TTL% is available for groups A and B only. • TTL: The units in the group fire in TTL mode. Flash compensation can be adjusted separately for each group. • TTL%: If TTL% is selected for either group A or B, you can specify the output of the selected group as a percentage of the other and adjust overall flash compensation for both groups. • M: In mode M, the units in the group fire at the selected output (expressed as a fraction of full power) regardless of subject brightness or camera settings. • MULTI: Choosing MULTI for any group sets all the units in all groups to repeating flash mode. All units will fire multiple times with each shot. • D (OFF): If OFF is selected, the units in the group will not fire. External Flash Units G Flash mode (TTL) Description Adjust flash level for the selected group according to option selected for flash control mode. Note that the full value may not be applied if the limits of the flash control system are exceeded. • TTL: Adjust flash compensation. • M/MULTI: Adjust flash output. • TTL%: Choose the balance between groups A and B and adjust overall flash compensation. Choose a flash mode for TTL flash control. The options available vary with the shooting mode (P, S, A, or M) selected. • E (FLASH AUTO): The flash fires only as required; flash level is adjusted according to subject brightness. A p icon displayed when the shutter button is pressed halfway indicates that the flash will fire when the photo is taken. • F (STANDARD): The flash fires with every shot if possible; flash level is adjusted according to subject brightness. The flash will not fire if not fully charged when the shutter is released. • G (SLOW SYNC.): Combine the flash with slow shutter speeds when photographing portrait subjects against a backdrop of night scenery. The flash will not fire if not fully charged when the shutter is released. 277 Peripherals and Optional Accessories Setting D Flash compensation/output (group A) E Flash compensation/output (group B) F Flash compensation/output (group C) 10 Setting H Sync Peripherals and Optional Accessories I Zoom J Lighting 10 278 Description Control flash timing. • H (1ST CURTAIN): The flash fires immediately after the shutter opens (generally the best choice). • I (2ND CURTAIN): The flash fires immediately before the shutter closes. • R (AUTO FP(HSS)): High-speed sync (compatible units only). The camera automatically engages front-curtain high-speed sync at shutter speeds faster than the flash sync speed. Equivalent to 1ST CURTAIN when MULTI is selected for flash control mode. The angle of illumination (flash coverage) for units that support flash zoom. Some units allow the adjustment to be made from the camera. If AUTO is selected, zoom will automatically be adjusted to match coverage to lens focal length. If the unit supports this feature, choose from: • J (FLASH POWER PRIORITY): Gain range by slightly reducing coverage. • K (STANDARD): Match coverage to picture angle. • L (EVEN COVERAGE PRIORITY): Slightly increase coverage for more even lighting. External Flash Units Setting K Master K Number of L Channel L Frequency Peripherals and Optional Accessories flashes Description Assign the master flash to group A (Gr A), B (Gr B), or C (Gr C). If OFF is selected, output from the master flash will be held to a level that does not affect the final picture. Available only if the unit is mounted on the camera hot shoe as a master flash for FUJIFILM optical wireless remote flash control in TTL, TTL%, or M mode. Choose the number of times the flash fires each time the shutter is released in MULTI mode. Choose the channel used by the master flash for communication with the remote flash units. Separate channels can be used for different flash systems or to prevent interference when multiple systems are operating in close proximity. Choose the frequency at which the flash fires in MULTI mode. 10 279 Vertical Power Booster Grips The optional VPB-XT2 vertical power booster grip can be used to supplement the camera battery or when holding the camera rotated to take pictures in portrait (“tall”) orientation. Peripherals and Optional Accessories A Shutter button B Q (quick menu) button C Fn (function 1) button D Control lock E Front command dial/ role selection button F Lock screw knob G Eyelet for camera strap H Tripod socket 10 I Connector J Lock screw K Compartment for connector cover L AE-L button M Rear command dial/ focus assist button N AF-L button O Focus stick (focus lever) P Indicator lamps Q Performance selector R Battery tray S Battery-chamber cover latch T Connector cover U 9 V DC-IN connector V Headphone jack socket supplied with camera O All controls perform the same function as the matching controls on the camera. 280 Vertical Power Booster Grips Using the VPB-XT2 When fully-charged batteries are inserted in both the camera and the VPB-XT2, the performance selector can be used to improve shutter response and boost the frame advance rate in continuous (burst) mode. O Movie recording, long time-exposures, or burst or interval timer photography may end unexpectedly depending on the battery level or temperature. The grip can be used with NP-W126 or NP-W126S batteries. Turn the camera off before attaching or removing the grip or inserting or removing batteries. N The performance selector takes priority over the option chosen for D POWER MANAGEMENT > PERFORMANCE. 281 Peripherals and Optional Accessories Position Maximum frame rate * Release lag 45 ms † Boosted 11 fps † Normal 8.0 fps 50 ms * Regardless of the option chosen with the performance selector, the maximum frame rate with electronic shutter is 14 fps. † Requires at least two batteries with some charge remaining, or if an AC power adapter is connected, a battery with some charge remaining inserted in the camera. Maximum frame rate if these conditions are not met is 8.0 fps. 10 Peripherals and Optional Accessories Battery Level When the VPB-XT2 is connected, the camera battery level display shows the camera battery level and the level of the batteries inserted in the VPB-XT2. When a full complement of batteries are inserted in the camera and the VPB-XT2, the left battery in the VPB-XT2 will be used until no charge remains, followed by the right battery and finally by the camera battery. 10 282 A B C Vertical Power Booster Grips Indicator lamp Off On Blinks Battery status Charging complete Charging in progress Charging fault O The batteries charge simultaneously; charging takes about two hours. The batteries will not charge while the camera is on, but power will be supplied to the camera. For more information, see pages 32 and 313. Use only the supplied AC power adapter. 283 Peripherals and Optional Accessories Charging the Batteries The batteries in the VPB-XT2 can be charged when the camera is off or the grip is removed from the camera. Connect the grip’s supplied AC-9VS AC power adapter to the 9V DC-IN connector. The indicator lamps will light green while the battery charges; the lamp on the left shows the status of the left battery, the lamp on the right the status of the right battery. 10 Lenses The camera can be used with lenses for the FUJIFILM X-mount. Lens Parts Peripherals and Optional Accessories A Lens hood marks 10 B Mounting C Focus ring D Zoom ring E Aperture ring 284 F O.I.S. switch G Aperture mode switch H Lens signal contacts I Front lens cap J Rear lens cap Lenses Removing Lens Caps Remove lens caps as shown. N Lens caps may differ from those shown. Peripherals and Optional Accessories Attaching Lens Hoods When attached, lens hoods reduce glare and protect the front lens element. 10 285 Lenses with Aperture Rings At settings other than A, you can adjust aperture by rotating the lens aperture ring (exposure modes A and M). N A 16 11 8 5.6 4 2.8 A 16 11 8 5.6 4 When the aperture ring is set to A, Aperture ring rotate the front command dial to adjust aperture. Peripherals and Optional Accessories The Aperture Mode Switch If the lens has an aperture mode switch, Aperture ring aperture can be adjusted manually by sliding the switch to Z and rotating the aperture ring. Aperture mode switch 10 286 Lenses Lenses with No Aperture Rings The method used to adjust aperture can be selected using D BUTTON/ DIAL SETTING > APERTURE SETTING. When an option other than AUTO is selected, aperture can be adjusted using the front command dial. but can be reassigned to the rear command dial using D BUTTON/DIAL SETTING > COMMAND DIAL SETTING. Lenses with O.I.S. Switches If the lens supports optical image stabilization (O.I.S.), the image stabilization mode can be chosen in the camera menus. To activate image stabilization, slide the O.I.S. switch to ON. O.I.S. switch Peripherals and Optional Accessories N Aperture control defaults to the front command dial, 10 287 Manual Focus Lenses Slide the focus ring to the front for autofocus. Peripherals and Optional Accessories 10 For manual focus, slide the focus ring to the back and rotate it while checking the results in the camera display. The focus distance and depth-of-field indicators can be used to assist manual focus. The Depth-of-Field Indicator The depth-of-field indicator shows the approximate depth of field (the distance in front of and behind the focus point that appears to be in focus). The indicator is displayed in film format. O Note that manual focus may not be available in all shooting modes. 288 Lenses Lens Care Use a blower to remove dust, then gently wipe with a soft, dry cloth. Any remaining stains can be removed by wiping gently with a piece of FUJIFILM lens-cleaning paper to which a small amount of lens-cleaning fluid has been applied. Replace the front and rear caps when the lens is not in use. Peripherals and Optional Accessories 10 289 MEMO 290 Connections 291 HDMI Output Camera shooting and playback displays can be output to HDMI devices. Connecting to HDMI Devices Connect the camera to TVs or other HDMI devices using a third-party HDMI cable. 1 2 Turn the camera off. Connect the cable as shown below, making sure the connectors are fully inserted. Insert into HDMI connector Connections 11 Insert into HDMI Micro connector (Type D) O Use an HDMI cable no more than 1.5 m (4.9 ft.) long. 3 Configure the device for HDMI input as described in the documentation supplied with the device. 292 HDMI Output 4 Turn the camera on. You can now shoot and play back pictures while viewing the television display and save pictures to the HDMI device. O The USB cable can not be used while an HDMI cable is connected. Shooting Shoot photos and record movies while viewing the scene through the camera lens on or saving footage to the HDMI device. N This feature can be used to save 4K and Full HD movies to an HDMI recorder. Playback To start playback, press the camera a button. The camera monitor turns off and pictures and movies are output to the HDMI device. Note that the camera volume controls have no effect on sounds played on the TV; use the television volume controls to adjust the volume. Connections O Some televisions may briefly display a black screen when 11 movie playback begins. 293 Wireless Transfer Access wireless networks and connect to computers, smartphones, or tablets. For downloads and other information, visit: http://fujifilm-dsc.com/wifi/ fujifilm Wi-Fi app Connections Wireless Connections: Smartphones Install the “FUJIFILM Camera Remote” app on your smartphone to browse the images on the camera, download selected images, control the camera remotely, or copy location data to the camera. Once the app is installed, connect using the A SHOOTING SETTING > WIRELESS COMMUNICATION or C PLAY BACK MENU > WIRELESS COMMUNICATION options in the camera menus. 11 294 Wireless Transfer Wireless Connections: Computers Once you have installed the “FUJIFILM PC AutoSave” application and configured your computer as a destination for the images copied from the camera, you can upload pictures from the camera using C PLAY BACK MENU > PC AUTO SAVE. Connections 11 295 Connecting to Computers via USB Connect the camera to a computer to download pictures or take pictures remotely. Tethered Shooting Take pictures remotely. Mac OS X/macOS Tethered shooting is available to purchasers of Adobe® Photoshop® Lightroom® and the FUJIFILM Tether Shooting PRO or Tether Shooting plug-ins. The FUJIFILM Tether Shooting PRO and Tether Shooting plug-ins are available from the Adobe add-ons website. Connections Windows Tethered shooting is available to purchasers of HS-V5 or of Adobe® Photoshop® Lightroom® and the FUJIFILM Tether Shooting PRO or Tether Shooting plug-ins. The FUJIFILM Tether Shooting PRO and Tether Shooting plug-ins are available from the Adobe add-ons website. 11 FUJIFILM X Acquire Tethered shooting is also available to users of FUJIFILM X Acquire, which can be downloaded free-of-charge from the FUJIFILM website. 296 Connecting to Computers via USB Copying Pictures to a Computer Pictures can be copied to Windows and Mac OS X/ macOS computers as described below. For information on using the software described, see online help. Windows Use MyFinePix Studio to copy pictures to your computer, where they can be stored, viewed, organized, and printed. MyFinePix Studio is available for download from the following website: http://fujifilm-dsc.com/mfs/ fujifilm mfs Once download is complete, double-click the downloaded file (“MFPS_Setup.EXE”) and follow the onscreen instructions to complete installation. Connections 11 297 Mac OS X/macOS Pictures can be copied to your computer using Image Capture (supplied with your computer) or other software. Viewing RAW Files To view RAW files on your computer, use the RAW FILE CONVERTER EX 2.0, available for download from: http://fujifilm-dsc.com/rfc/ fujifilm rfc Connecting the Camera 1 Find a memory card containing pictures you want to copy to the computer and insert the card into the camera. Connections O Loss of power during transfer could result in loss of data or damage to the memory card. Insert a fresh or fully-charged battery before connecting the camera. 11 298 Connecting to Computers via USB 2 Turn the camera off and connect a third-party USB 3.0 or 2.0 cable (either type can be used), making sure the connectors are fully inserted. Micro USB (Micro-B) Micro USB (Micro-B) USB 3.0 USB 2.0 O Use a USB 3.0 cable for higher speeds with computers that support USB 3.0. Turn the camera on. 5 When transfer is complete, turn the camera off and disconnect the USB cable. Connections 3 4 Copy pictures to your computer. During tethered shooting, you can copy pictures using tethered shooting software such as the FUJIFILM Tethered Shooting Plug-in PRO. Otherwise you can use MyFinePix Studio or applications provided with 11 your operating system. 299 Connecting to Computers via USB O If a memory card containing a large number of images is inserted, there may be a delay before the software starts and you may be unable to import or save images. Use a memory card reader to transfer pictures. The USB cable must be no more than 1.5 m (4.9 ft.) long and be suitable for data transfer. Connect the camera directly to the computer; do not use a USB hub or keyboard. Make sure that the computer does not display a message stating that copying is in progress and that the indicator lamp is out before turning the camera off or disconnecting the USB cable (if the number of images copied is very large, the indicator lamp may remain lit after the message has cleared from the computer display). Failure to observe this precaution could result in loss of data or damage to the memory card. Connections 11 Disconnect the camera before inserting or removing memory cards. In some cases, it may not be possible to access pictures saved to a network server using the software in the same way as on a standalone computer. The user bears all applicable fees charged by the phone company or Internet service provider when using services that require an Internet connection. 300 instax SHARE Printers Print pictures from your digital camera to instax SHARE printers. Establishing a Connection Select D CONNECTION SETTING > instax PRINTER CONNECTION SETTING and enter the instax SHARE printer name (SSID) and password. The Printer Name (SSID) and Password The printer name (SSID) can be found on the bottom of the printer; the default password is “1111”. If you have already chosen a different password to print from a smartphone, enter that password instead. Connections 11 301 instax SHARE Printers Printing Pictures 1 Turn the printer on. 2 Select C PLAY BACK MENU > instax PRINTER PRINT. The camera will connect to the printer. N 3 PRINTER PRINT instax-12345678 CONNECTING TO PRINTER FUJIFILM-CAMERA-1234 CANCEL To print a frame from a burst sequence, display the frame before selecting instax PRINTER PRINT. Use the selector to display the picture you want to print, then press MENU/OK. PRINTER PRINT 100-0020 TRANSMIT instax-12345678 CANCEL N Pictures taken with other cameras can not be printed. Connections The area printed is smaller than the area visible in the LCD monitor. 4 The picture will be sent to the printer and printing will start. 11 302 Technical Notes 303 Accessories from FUJIFILM The following optional accessories are available from FUJIFILM. For the latest information on the accessories available in your region, check with your local FUJIFILM representative or visit http://www.fujifilm.com/products/ digital_cameras/index.html. Rechargeable Li-ion batteries NP-W126/NP-W126S: Additional high-capacity NP-W126/ NP-W126S rechargeable batteries can be purchased as required. Battery chargers BC-W126: Replacement battery chargers can be purchased as required. At +20 °C/+68 °F, the BC-W126 charges an NP-W126/NP-W126S in about 150 minutes. Technical Notes 12 AC power adapters AC-9V (requires CP-W126 DC coupler): Use this 100–240 V, 50/60 Hz AC power adapter for extended shooting and playback or when copying pictures to a computer. DC couplers CP-W126: Connect the AC-9V to the camera. Remote releases RR-90: Use to reduce camera shake or keep the shutter open during a time exposure. 304 Accessories from FUJIFILM Stereo microphones MIC-ST1: An external microphone for movie recording. FUJINON lenses XF-series lenses: Interchangeable lenses for use exclusively with the FUJIFILM X-mount. XC-series lenses: Interchangeable lenses for use exclusively with the FUJIFILM X-mount. Technical Notes Shoe-mounted flash units EF-X500: This clip-on flash unit has a Guide Number of 50/164 (ISO 100, m/ft.) and supports FP (high-speed sync), allowing it to be used at shutter speeds that exceed the flash sync speed. Powered by four AA batteries or an optional EF-BP1 battery pack, it supports manual and TTL flash control and auto power zoom in the range 24–105 mm (35 mm format equivalent) and features FUJIFILM optical wireless flash control, allowing it to be used as a master or remote flash unit for remote wireless flash photography. The flash head can be rotated 90° up, 10° down, 135° left, or 180° right for bounce lighting. EF-20: This clip-on flash unit (powered by two AA batteries) has a Guide Number of 20/65 (ISO 100, m/ft.) and supports TTL flash control (manual flash control is not supported). The flash head can be rotated upwards 90° for bounce lighting. 12 305 Shoe-mounted flash units (continued) EF-42: This clip-on flash unit (powered by four AA batteries) has a Guide Number of 42/137 (ISO 100, m/ft.) and supports manual and TTL flash control and auto power zoom in the range 24–105 mm (35 mm format equivalent). The flash head can be rotated 90° up, 180° left, or 120° right for bounce lighting. EF-X20: This clip-on flash unit has a Guide Number of 20/65 (ISO 100, m/ft.). Powered by two AAA batteries, this light, compact unit features a dial for adjusting TTL flash compensation or manual flash output. Vertical power booster grips VPB-XT2: This grip accommodates extra batteries for improved endurance and makes it easier to hold the camera rotated 90° to frame pictures in “tall” (portrait) orientation. Technical Notes 12 Hand grips MHG-XT2: Features an improved grip. Batteries and memory cards can be removed with the grip in place, and the grip is equipped with a rail for quick-shoe camera mounts. Leather cases BLC-XT2: This case combines practicality with the luxury of leather and comes with a cloth that can be used to wrap the camera before putting it in the case and on other occasions. Pictures can be taken and batteries inserted or removed with the camera still in its case. 306 Accessories from FUJIFILM Grip belts GB-001: Improves grip. Combine with a hand grip for more secure handling. Macro extension tubes MCEX-11/16: Attach between the camera and the lens to shoot at high reproduction ratios. Teleconverters XF1.4X TC WR: Increases the focal length of the compatible lenses by about 1.4×. XF2X TC WR: Increases the focal length of the compatible lenses by about 2.0×. Mount adapters FUJIFILM M MOUNT ADAPTER: Allows the camera to be used with a wide selection of M-mount lenses. Body caps BCP-001: Cover the camera lens mount when no lens is attached. Cover kits CVR-XT2: A set of covers for the X-T2. Technical Notes instax SHARE printers SP-1/SP-2: Connect via wireless LAN to print pictures on instax film. 12 307 For Your Safety IMPORTANT SAFETY INSTRUCTIONS Instructions: All the safety and operating in• Read Instructions structions should be read before the appliance is operated. Instructions: The safety and operating in• Retain Instructions structions should be retained for future reference. Warnings: All warnings on the appliance and • Heed Warnings in the operating instructions should be adhered to. Follow Instructions Instructions: All operating and use instruc• tions should be followed. Technical Notes 12 Installation Power Sources: This video product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For video products intended to operate from battery power, or other sources, refer to the operating instructions. Grounding or Polarization: This video product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. Alternate Warnings: This video product is equipped with a three-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding type plug. Overloading: Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 308 Ventilation: Slots and openings in the cabinet are provided for ventilation, to ensure reliable operation of the video product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the video product on a bed, sofa, rug, or other similar surface. This video product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to. This video product should never be placed near or over a radiator or heat register. Attachments: Do not use attachments not recommended by the video product manufacturer as they may cause hazards. Water and Moisture: Do not use this video product near water—for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. Power-Cord Protection: Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. Accessories: Do not place this video product on an unstable cart, stand, tripod, bracket, or table. The video product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the video product. Any mounting of the appliance should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer. For Your Safety An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. Antennas Outdoor Antenna Grounding: If an outside antenna or cable system is connected to the video product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE Ground Clamp Antenna Lead in Wire Elec Service Electric Equipmentt AAnntenna Discharge Unitt D (NEC N SECTION 810-20) Grounding Conductors (NEC Power Service Grounding SECTION 810-21) Electrode System (NEC ART 250. PART H) Power Lines: An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. Service Servicing: Do not attempt to service this video product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Damage Requiring Service: Unplug this video product from the wall outlet and refer servicing to qualified service personnel under the following conditions: • When the power-supply cord or plug is damaged • If liquid has been spilled, or objects have fallen into the video product. • If the video product has been exposed to rain or water. • If the video product has been dropped or the cabinet has been damaged. If the video product does not operate normally follow the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the video product to its normal operation. When the video product exhibits a distinct change in performance — this indicates a need for service. 309 Technical Notes Ground Clamps Use Cleaning: Unplug this video product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Object and Liquid Entry: Never push objects of any kind into this video product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the video product. Lightning: For added protection for this video product receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the video product due to lightning and power-line surges. 12 Replacement Parts: When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. Safety Check: Upon completion of any service or repairs to this video product, ask the service technician to perform safety checks to determine that the video product is in proper operating condition. Be sure to read these notes before use Safety Notes • Make sure that you use your camera correctly. The symbols on the product (including the accesories) represent the following: AC DC Class II equipment (The construction of the product is double-insulated.) Read these safety notes and your Owner’s Manual carefully before use. • After reading these safety notes, store them in a safe place. About the Icons The icons shown below are used in this document to indicate the severity of the injury or damage that can result if the information indicated by the icon is ignored and the product is used incorrectly as a result. This icon indicates that death WARNING or serious injury can result if the information is ignored. This icon indicates that personal CAUTION injury or material damage can result if the information is ignored. Technical Notes 12 The icons shown below are used to indicate the nature of the instructions which are to be observed. Triangular icons tell you that this information requires attention (“Important”). Circular icons with a diagonal bar tell you that the action indicated is prohibited (“Prohibited”). Filled circles with an exclamation mark indicate an action that must be performed (“Required”). 310 WARNING If a problem arises, turn the camera off, remove the battery, and disconnect and unplug the AC power adapter. Continued use of the Unplug camera when it is emitting smoke, is emitfrom power ting any unusual odor, or is in any other socket abnormal state can cause a fire or electric shock. Contact your FUJIFILM dealer. Do not allow water or foreign objects to enter the camera. If water or foreign objects get inside the camera, turn the camera off, remove the battery, and disconnect and unplug the AC power adapter. Continued use of the camera can cause a fire or electric shock. Contact your FUJIFILM dealer. Do not use in the bathroom or shower Do not disassemble Do not use the camera in the bathroom or shower. This can cause a fire or electric shock. Never attempt to change or take apart the camera (never open the case). Failure to observe this precaution can cause fire or electric shock. For Your Safety Do not touch internal parts WARNING Should the case break open as the result of a fall or other accident, do not touch the exposed parts. Failure to observe this precaution could result in electric shock or in injury from touching the damaged parts. Remove the battery immediately, taking care to avoid injury or electric shock, and take the product to the point of purchase for consultation. Do not change, heat or unduly twist or pull the connection cord and do not place heavy objects on the connection cord. These actions could damage the cord and cause a fire or electric shock. If the cord is damaged, contact your FUJIFILM dealer. Do not place the camera on an unstable surface. This can cause the camera to fall or tip over and cause injury. Never attempt to take pictures while in motion. Do not use the camera while walking or driving. This can result in you falling down or being involved in a traffic accident. Do not touch any metal parts of the camera during a thunderstorm. This can cause an electric shock due to induced current from the lightning discharge. Do not use the battery except as specified. Load the battery as shown by the indicator. Do not disassemble, modify, or heat batteries. Do not drop, strike, or throw batteries or otherwise subject them to strong impacts. Do not use batteries that show signs of leaking, deformation, discoloration, or other abnormalities. Use only designated chargers to recharge rechargeable batteries and do not attempt to recharge non-rechargeable Li-ion or alkaline batteries. Do not short batteries or store them with metallic objects. Failure to observe these precautions could result in the batteries overheating, igniting, rupturing, or leaking, causing fire, burns, or other injury. Use only batteries or AC power adapters specified for use with this camera. Do not use voltages other than the power supply voltage shown. The use of other power sources can cause a fire. If the battery leaks and fluid gets in contact with your eyes, skin or clothing, flush the affected area with clean water and seek medical attention or call an emergency number right away. Do not use the charger to charge batteries other than those specified here. The supplied charger is for use only with batteries of the type supplied with the camera. Using the charger to charge conventional batteries or other types of rechargeable batteries can cause the battery to leak, overheat or burst. Using a flash too close to a person’s eyes may cause visual impairment. Take particular care when photographing infants and young children. Do not remain in prolonged contact with hot surfaces. Failure to observe this precaution could result in low-temperature burns, particularly at high ambient temperatures or with users who suffer from poor circulation or reduced sensation, in which case use of a tripod or similar precautions are recommended. Do not leave one part of the body in contact with the product for prolonged periods while the product is on. Failure to observe this precaution could result in low-temperature burns, particularly during prolonged use, at high ambient temperatures, or with users who suffer from poor circulation or reduced sensation, in which case use of a tripod or similar precautions are recommended. Do not use in the presence of flammable objects, explosive gases, or dust. 311 Technical Notes WARNING 12 WARNING CAUTION When carrying the battery, install it in a digital camera or keep it in the hard case. When storing the battery, keep it in the hard case. When discarding, cover the battery terminals with insulation tape. Contact with other metallic objects or batteries could cause the battery to ignite or burst. Keep memory cards, hot shoes, and other small parts out of the reach of small children. Children may swallow small parts; keep out of reach of children. Should a child swallow a small part, seek medical attention or call emergency. Keep out of reach of small children. Among the elements that could cause injury are the strap, which could become entangled about a child’s neck, causing strangulation, and the flash, which could cause visual impairment. Follow the directions of airline and hospital personnel. This product generates radio-frequency emissions that could interfere with navigational or medical equipment. Do not cover or wrap the camera or the AC power adapter in a cloth or blanket. This can cause heat to build up and distort the casing or cause a fire. When you are cleaning the camera or you do not plan to use the camera for an extended period, remove the battery and disconnect and unplug the AC power adapter. Failure to do so can cause a fire or electric shock. When charging ends, unplug the charger from the power socket. Leaving the charger plugged into the power socket can cause a fire. When a memory card is removed, the card could come out of the slot too quickly. Use your finger to hold it and gently release the card. Injury could result to those struck by the ejected card. Request regular internal testing and cleaning for your camera. Build-up of dust in your camera can cause a fire or electric shock. Contact your FUJIFILM dealer to request internal cleaning every two years. Please note that this service is not free of charge. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. CAUTION Technical Notes 12 Do not use this camera in locations affected by oil fumes, steam, humidity or dust. This can cause a fire or electric shock. Do not leave this camera in places subject to extremely high temperatures. Do not leave the camera in locations such as a sealed vehicle or in direct sunlight. This can cause a fire. Do not place heavy objects on the camera. This can cause the heavy object to tip over or fall and cause injury. Do not move the camera while the AC power adapter is still connected. Do not pull on the connection cord to disconnect the AC power adapter. This can damage the power cord or cables and cause a fire or electric shock. 312 For Your Safety 313 Technical Notes The Battery and Power Supply Note: Check the type of battery used in your camera Do not attempt to recharge a fully charged battery. The battery does not however need to be and read the appropriate sections. WARNING: Battery shall not be exposed to exces- fully discharged before charging. The battery may be warm to the touch immedisive heat such as sunshine, fire or the like. The following describes the proper use of batter- ately after charging or use. This is normal. ies and how to prolong their life. Incorrect use can ■ Battery Life shorten battery life or cause leakage, overheating, At normal temperatures, the battery can be recharged about 300 times. A noticeable decrease fire, or explosion. in the length of time the battery will hold a Li-ion Batteries charge indicates that it has reached the end of its Read this section if your camera uses a rechargeable service life and should be replaced. Li-ion battery. ■ Storage The battery is not charged at shipment. Charge Performance may be impaired if the battery is left the battery before use. Keep the battery in its case unused for extended periods when fully charged. when not in use. Run the battery flat before storing it. ■ Notes on the Battery If the camera will not be used for an extended peThe battery gradually loses its charge when not in riod, remove the battery and store it in a dry place use. Charge the battery one or two days before use. with an ambient temperature of from +15 °C to Battery life can be extended by turning the cam- +25 °C (+59 °F to +77 °F). Do not store in locaera off when not in use. tions exposed to extremes of temperature. Battery capacity decreases at low temperatures; ■ Cautions: Handling the Battery a depleted battery may not function when cold. • Do not transport or store with metal objects Keep a fully charged spare battery in a warm such as necklaces or hairpins. place and exchange as necessary, or keep the • Do not expose to flame or heat. battery in your pocket or other warm place and • Do not disassemble or modify. insert it in the camera only when shooting. Do • Use with designated chargers only. not place the battery in direct contact with hand • Dispose of used batteries promptly. warmers or other heating devices. • Do not drop or subject to strong physical shocks. ■ Charging the Battery • Do not expose to water. Charge the battery in the supplied battery char- • Keep the terminals clean. ger. Charging times will increase at ambient tem- • The battery and camera body may become warm peratures below +10 °C (+50 °F) or above +35 °C to the touch after extended use. This is normal. (+95 °F). Do not attempt to charge the battery at ■ Caution: Disposal temperatures above 40 °C (+104 °F); at temperatures Dispose of used batteries in accord with local below 0 °C (+32 °F), the battery will not charge. regulations. Attention should be drawn to the environmental aspects of battery disposal. Use the apparatus under moderate climate. 12 AC Power Adapters (Available Separately) Use only FUJIFILM AC power adapters designated for use with this camera. Other adapters could damage the camera. • The AC power adapter is for indoor use only. • Be sure the DC plug is securely connected to the camera. • Turn the camera off before disconnecting the adapter. Disconnect the adapter by the plug, not the cable. touch during use. This is normal. • If the adapter causes radio interference, reorient or relocate the receiving antenna. Using the Camera Handling sources, such as the sun in a cloudless sky. Fail- To ensure that images are recorded correctly, ure to observe this precaution could damage do not subject the camera to impact or physical the camera image sensor. shocks while images are being recorded. • Strong sunlight focused through the viewfinder Liquid Crystal may damage the panel of electronic viewfinder In the event that the display is damaged, care (EVF). Do not aim the electronic viewfinder at should be taken to avoid contact with liquid crysthe sun. tal. Take the urgent action indicated should any of Take Test Shots the following situations arise: Before taking photographs on important occa- • If liquid crystal comes in contact with your skin, sions (such as at weddings or before taking the clean the area with a cloth and then wash thorcamera on a trip), take a test shot and view the oughly with soap and running water. results to ensure that the camera is functioning • If liquid crystal enters your eyes, flush the affectnormally. FUJIFILM Corporation can not accept ed eye with clean water for at least 15 minutes liability for damages or lost profits incurred as a and then seek medical assistance. result of product malfunction. • If liquid crystal is swallowed, rinse your mouth thoroughly with water. Drink large quantities of Notes on Copyright water and induce vomiting, then seek medical Unless intended solely for personal use, images assistance. recorded using your digital camera system cannot be used in ways that infringe copyright laws with- Although the display is manufactured using exout the consent of the owner. Note that some tremely high-precision technology, it may contain restrictions apply to the photographing of stage pixels that are always lit or that do not light. This is performances, entertainments, and exhibits, even not a malfunction, and images recorded with the when intended purely for personal use. Users are product are unaffected. • Do not aim the camera at extremely bright light Technical Notes 12 • Do not use with other devices. • Do not disassemble. • Do not expose to high heat and humidity. • Do not subject to strong physical shocks. • The adapter may hum or become hot to the also asked to note that the transfer of memory cards containing images or data protected under copyright laws is only permissible within the restrictions imposed by those copyright laws. 314 For Your Safety Trademark Information Digital Split Image is a trademark or registered trademark of FUJIFILM Corporation. xD-Picture Card and E are trademarks of FUJIFILM Corporation. The typefaces included herein are solely developed by DynaComware Taiwan Inc. Macintosh, Mac OS, and macOS are trademarks of Apple Inc. in the U.S.A. and other countries. Windows is a registered trademark of Microsoft Corporation in the U.S.A. and other countries. Adobe, the Adobe logo, Photoshop, and Lightroom are trademarks or registered trademarks of Adobe Systems Incorporated in the U.S.A. and other countries. Wi-Fi® and Wi-Fi Protected Setup® are registered trademarks of the Wi-Fi Alliance. The SDHC and SDXC logos are trademarks of SD-3C, LLC. The HDMI logo is a trademark. All other trade names mentioned in this manual are the trademarks or registered trademarks of their respective owners. Electrical Interference This camera may interfere with hospital or aviation equipment. Consult with hospital or airline staff before using the camera in a hospital or on an aircraft. Color Television Systems NTSC (National Television System Committee) is a color television telecasting specification adopted mainly in the U.S.A., Canada, and Japan. PAL (Phase Alternation by Line) is a color television system adopted mainly in European countries and China. Exif Print (Exif Version 2.3) Exif Print is a newly revised digital camera file format in which information stored with photographs is used for optimal color reproduction during printing. IMPORTANT NOTICE: Read Before Using the Software Direct or indirect export, in whole or in part, of licensed software without the permission of the applicable governing bodies is prohibited. NOTICES To prevent fire or shock hazard, do not expose the unit to rain or moisture. Please read the “Safety Notes” and make sure you understand them before using the camera. Perchlorate Material—special handling may apply. See: http://www.dtsc.ca.gov/hazardouswaste/perchlorate Technical Notes 12 315 For Customers in the U. S. A. Tested To Comply With FCC Standards FOR HOME OR OFFICE USE Technical Notes Contains IC : 7736B-02000002 Contains FCC ID : W2Z-02000002 FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. 12 316 FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Notes on the Grant: To comply with Part 15 of the FCC Rules, this product must be used with a Fujifilm-specified ferrite-core A/V cable, USB cable, and DC supply cord. A lithium ion battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery. For Customers in Canada CAN ICES-3 (B)/NMB-3(B) CAUTION: This Class B digital apparatus complies with Canadian ICES-003. Industry Canada statement: This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. For Your Safety This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios. The County Code Selection feature is disabled for products marketed in the US/ Canada. Radiation Exposure Statement: The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. X-T2 has been tested and found to comply with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This symbol on the batteries or accumulators indicates that those batteries shall not be treated as household waste. If your equipment contains easy removable batteries or accumulators please dispose these separately according to your local requirements. The recycling of materials will help to conserve natural resources. For more detailed information about recycling this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. In Countries Outside the European Union, Norway, Iceland and Liechtenstein: If you wish to discard this product, including the batteries or accumulators, please contact your local authorities and ask for the correct way of disposal. In Japan: This symbol on the batteries indicates that they are to be disposed of separately. Technical Notes Disposal of Electrical and Electronic Equipment in Private Households In the European Union, Norway, Iceland and Liechtenstein: This symbol on the product, or in the manual and in the warranty, and/or on its packaging indicates that this product shall not be treated as household waste. Instead it should be taken to an applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences to the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. 12 317 Be sure to read these notes before use Safety Notes WARNING • Make sure that you use the lens correctly. Read Should the case break open as the result of a fall or other accident, do not touch the exposed parts. Failure to observe this precaution could result in electric shock or in injury from touching the damaged parts. Remove the battery immediately, taking care to avoid injury or electric shock, and take the product to the point of purchase for consultation. Do not place on unstable surfaces. The product may fall, causing injury. Do not view the sun through the lens or camera viewfinders. Failure to observe this precaution can cause permanent visual impairment. these safety notes and the camera Owner’s Manual carefully before use. • After reading these safety notes, store them in a safe place. About the Icons The icons shown below are used in this document to indicate the severity of the injury or damage that can result if the information indicated by the icon is ignored and the product is used incorrectly as a result. This icon indicates that death WARNING or serious injury can result if the information is ignored. This icon indicates that personal CAUTION injury or material damage can result if the information is ignored. The icons shown below are used to indicate the nature of the instructions which are to be observed. Technical Notes 12 Triangular icons tell you that this information requires attention (“Important”). Circular icons with a diagonal bar tell you that the action indicated is prohibited (“Prohibited”). Filled circles with an exclamation mark indicate an action that must be performed (“Required”). WARNING Do not immerse Do not disassemble Do not immerse in or expose to water. Failure to observe this precaution can cause a fire or electric shock. Do not disassemble (do not open the case). Failure to observe this precaution can cause fire, electric shock, or injury due to product malfunction. 318 Do not touch internal parts CAUTION Do not use or store in locations that are exposed to steam, or smoke or are very humid or extremely dusty. Failure to observe this precaution can cause fire or electric shock. Do not leave in direct sunlight or in locations subject to very high temperatures, such as in a closed vehicle on a sunny day. Failure to observe this precaution can cause fire. Keep out of the reach of small children. This product could cause injury in the hands of a child. Do not handle with wet hands. Failure to observe this precaution can cause electric shock. Keep the sun out of the frame when shooting backlit subjects. Sunlight focused into the camera when the sun is in or close to the frame can cause fire or burns. When the product is not in use, replace the lens caps and store out of direct sunlight. Sunlight focused by the lens can cause fire or burns. Do not carry the camera or lens while they are attached to a tripod. The product can fall or strike other objects, causing injury. For Your Safety European Union Regulatory Notice This product complies with the following EU Directives: • RoHS Directive 2011/65/EU • RE Directive 2014/53/EU Hereby, FUJIFILM Corporation declares that the radio equipment type FF160001 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http:// www.fujifilm.com/products/digital_cameras/x/ fujifilm_x_t2/pdf/index/fujifilm_x_t2_cod.pdf This compliance is indicated by the following conformity marking placed on the product: • Use only in the country in which the device was pur- chased. This device conforms to regulations governing wireless network devices in the country in which it was purchased. Observe all location regulations when using the device. FUJIFILM does not accept liability for problems arising from use in other jurisdictions. • Wireless data (images) may be intercepted by third parties. The security of data transmitted over wireless networks is not guaranteed. • Do not use the device in locations subject to magnetic fields, static electricity, or radio interference. Do not use the transmitter in the vicinity of microwave ovens or in other locations subject to magnetic fields, static electricity, or radio interference that may prevent reception of wireless This marking is valid for non-Telecom products and signals. Mutual interference may occur when EU harmonized Telecom products (e.g. Bluetooth). the transmitter is used in the vicinity of other wireless devices operating in the 2.4 GHz band. IMPORTANT: Read the following notices before using • The wireless transmitter operates in the 2.4 GHz the camera’s built-in wireless transmitter. band using DSSS and OFDM modulation. Q This product, which contains encryption function developed in the United States, is controlled by the United States Export Administration Regulations and may not be exported or re-exported to any country to which the United States embargoes goods. network.. • Use only as part of a wireless network Technical Notes FUJIFILM does not accept liability for damages resulting from unauthorized use. Do not use in applications requiring a high degree of reliability, for example in medical devices or other systems that may directly or indirectly impact human life. When using the device in computer and other systems that demand a greater degree of reliability than wireless networks, be sure to take all necessary precautions to ensure safety and prevent malfunction. 12 319 For Your Safety Wireless Network Devices: Cautions • This device operates on the same frequency as commercial, educational, and medical devices and wireless transmitters. It also operates on the same frequency as licensed transmitters and special unlicensed low-voltage transmitters used in RFID tracking systems for assembly lines and in other similar applications. • To prevent interference with the above devices, observe the following precautions. Confirm that the RFID transmitter is not in operation before using this device. Should you observe that the device causes interference in licensed transmitters used for RFID tracking, immediately stop using the affected frequency or move the device to another location. If you notice that this device causes interference in low-voltage RFID tracing systems, contact a FUJIFILM representative. This sticker indicates that this device operates in the 2.4 GHz band using DSSS and OFDM modulation and may cause interference at distances of up to 40 m. 2.4DS/OF4 Technical Notes 12 320 Product Care To ensure continued enjoyment of the product, observe the following precautions. Camera body: Use a soft, dry cloth to clean the camera body after each use. Do not use alcohol, thinner, or other volatile chemicals, which could discolor or deform the leather on the camera body. Any liquid on the camera should be removed immediately with a soft, dry cloth. Use a blower to remove dust from the monitor, taking care to avoid scratches, and then gently wipe with a soft, dry cloth. Any remaining stains can be removed by wiping gently with a piece of FUJIFILM lens-cleaning paper to which a small amount of lens-cleaning fluid has been applied. To prevent dust entering the camera, replace the body cap when no lens is in place. Technical Notes Image sensor: Multiple photographs marred by spots or blotches in identical locations may indicate the presence of dust on the image sensor. Clean the sensor using D USER SETTING > SENSOR CLEANING. 12 321 Cleaning the Image Sensor Dust that can not be removed using D USER SETTING > SENSOR CLEANING can be removed manually as described below. O Note that there will be a charge to repair or replace the image sensor if it is damaged during cleaning. 1 Use a blower (not a brush) to remove dust from the sensor. O Do not use a brush or blower brush. Failure to observe this precaution could damage the sensor. 2 Check whether the dust has been successfully removed. Repeat Steps 1 and 2 as necessary. 3 Replace the body cap or lens. Technical Notes 12 322 Firmware Updates Updates to product firmware may result in changes not described in the manual. For more information, visit: http://www.fujifilm.com/support/digital_cameras/ software fujifilm firmware Checking the Firmware Version O The camera will only display the firmware version if a memory card is inserted. Turn the camera off and check that a memory card is inserted. 2 Turn the camera on while pressing the DISP/BACK button. The current firmware version will be displayed; check the firmware version. 3 Turn the camera off. N If a lens is attached to the camera, you can also check the lens firmware version. Technical Notes 1 12 323 Troubleshooting Consult the table below should you encounter problems using your camera. If you don’t find the solution here, contact your local FUJIFILM distributor. Power and Battery Problem Solution • The battery is exhausted: Charge the battery or insert Technical Notes 12 a fully-charged spare battery (P 30). The camera does • The battery is inserted incorrectly: Reinsert in the correct orientation (P 34). not turn on. • The battery-chamber cover is not latched: Latch the battery-chamber cover (P 34). The monitor The monitor may not turn on if the camera is turned does not turn off and then on again very quickly. Press the shutter on. button halfway to activate the monitor. • The battery is cold: Warm the battery by placing it in a pocket or other warm place and reinsert it in the camera immediately before taking a picture. • There is dirt on the battery terminals: Clean the terThe battery runs minals with a soft, dry cloth. down quickly. • ON is selected for G AF/MF SETTING > PRE-AF: Turn PRE-AF off (P 141). • The battery has been charged many times: The battery has reached the end of its charging life. Purchase a new battery. 324 Troubleshooting Problem Solution The camera turns The battery is exhausted: Charge the battery or insert a fully-charged spare battery (P 30). off suddenly. Reinsert the battery in the correct orientation Charging does and make sure that the charger is plugged in not start. (P 30, 34). Charging is slow. Charge the battery at room temperature. • There is dirt on the battery terminals: Clean the terminals with a soft, dry cloth (P 34). The charging lamp blinks, but • The battery has been charged many times: The battery the battery does has reached the end of its charging life. Purchase a new battery. If the battery still fails to charge, not charge. contact your FUJIFILM dealer (P 304). Menus and Displays Problem Solution Display is not in Select ENGLISH for D USER SETTING > English. a (P 46, 206). Solution • The memory card is full: Insert a new memory card or delete pictures (P 37, 182). No picture is taken when the • The memory card is not formatted: Format the memshutter button is ory card (P 203). pressed. • There is dirt on the memory card contacts: Clean the contacts with a soft, dry cloth. 325 Technical Notes Shooting Problem 12 Problem Solution • The memory card is damaged: Insert a new memory No picture is taken when the shutter button is pressed (continued). card (P 37). • The battery is exhausted: Charge the battery or insert a fully-charged spare battery (P 30). • The camera has turned off automatically: Turn the camera on (P 42). • You are using a third-party mount adapter: Select ON Technical Notes for SHOOT WITHOUT LENS (P 233). Mottling (“noise”) Gain is increased to aid composition when the appears in the subject is poorly lit and aperture is stopped down, monitor or viewwhich may result in noticeable mottling when imfinder when the ages are previewed in the displays. Images taken shutter button is with the camera are unaffected. pressed halfway. The camera does The subject is not suited to autofocus: Use focus lock or not focus. manual focus (P 93). • The subject’s face is obscured by sunglasses, a hat, long hair, or other objects: Remove the obstructions (P 143). No face is • The subject’s face occupies only a small area of the frame: Change the composition so that the subject’s face detected. occupies a larger area of the frame (P 143). • The subject’s head is tilted or horizontal: Ask the subject to hold their head straight (P 143). 12 326 Troubleshooting Problem No face is detected (continued). Solution • The camera is tilted: Keep the camera level. • The subject’s face is poorly lit: Shoot in bright light. Technical Notes The selected subject is closer to the center of the Wrong subject is frame than the main subject. Recompose the picselected. ture or turn face detection off and frame the picture using focus lock (P 93). The flash does The battery is exhausted: Charge the battery or insert a fully-charged spare battery (P 30). not fire. • The subject is not in range of the flash: Position the subject in range of the flash. The flash does The flash window is obstructed: Hold the camera • not fully light correctly. the subject. • Shutter speed is faster than ½50 s: Choose a slower shutter speed (P 64, 72). • The lens is dirty: Clean the lens (P 289). • The lens is blocked: Keep objects away from the lens (P 49). Pictures are blurred. • s is displayed during shooting and the focus frame is displayed in red: Check focus before shooting (P 50). Shutter speed is slow and the ambient temperature is • Pictures are high: This is normal and does not indicate a malmottled. function. 12 327 Problem Solution • Pixel mapping is required: Perform pixel mapping Pictures are mottled (continued). using H IMAGE QUALITY SETTING > PIXEL MAPPING (P 130). • The camera has been used continuously at high temperatures or a temperature warning is displayed: Turn the camera off and wait for it to cool down (P 42). Playback Technical Notes 12 Problem Solution Pictures are The pictures were taken with a different make or grainy. model of camera. Playback zoom is The pictures were created using RESIZE or with a unavailable. different make or model of camera. • Playback volume is too low: Adjust playback volume (P 213). No sound in • The microphone was obstructed: Hold the camera movie playback. correctly during recording. • The speaker is obstructed: Hold the camera correctly during playback. Some of the pictures selected for deletion are proSelected pictures tected. Remove protection using the device with are not deleted. which it was originally applied (P 187). File numbering The battery-chamber cover was opened while the is unexpectedly camera was on. Turn the camera off before opening reset. the battery-chamber cover (P 239). 328 Troubleshooting Connections Problem Technical Notes Solution The camera is connected to a TV: Pictures will be disThe monitor is played on the TV instead of in the camera monitor blank. (P 292). • The camera is not properly connected: Connect the camera properly (P 292). No picture or • Input on the television is set to “TV”: Set input to “HDMI” (P 292). sound on TV. • The volume on the TV is too low: Use the controls on the television to adjust the volume (P 292). The display mode selected with the VIEW MODE button Both the TV and is EVF ONLY + E: Put your eye to the viewfindcamera monitor er or use the VIEW MODE button to choose another are blank. display mode. The computer Be sure the camera and computer are correctly condoes not recognected (P 296). nize the camera. Can not transfer Use MyFinePix Studio to transfer pictures (Windows RAW or JPEG files only; P 296). to computer. 12 329 Wireless Transfer For additional information on troubleshooting wireless connections, visit: http://digital-cameras.support. fujifilm.com/app?pid=x Problem Problem connecting or uploading pictures to smartphone. Technical Notes 12 Solution • The smartphone is too far away: Move the devices closer (P 294). • Nearby devices are causing radio interference: Move the camera and smartphone away from microwave ovens or cordless phones (P 294). • The smartphone is connected to another device: The smartphone and camera can connect to only one device at a time. End the connection and try again (P 294). Can not upload • There are several smartphones in the vicinity: Try connecting again. The presence of multiple smartimages. phones can make connection difficult (P 294). • The current image is a movie or was created on another device and can not be uploaded to a smartphone (P 294). Select ON for D CONNECTION SETTING > WIRELESS SETTING > RESIZE IMAGE FOR Smartphone SMARTPHONE H. Selecting OFF increases will not display upload times for larger images; in addition, some pictures. phones may not display images over a certain size (P 244). 330 Troubleshooting Miscellaneous Problem Solution • Temporary camera malfunction: Remove and reinThe camera is unresponsive. sert the battery (P 34). • The battery is exhausted: Charge the battery or insert a fully-charged spare battery (P 30). • The camera is connected to a wireless LAN: End the connection. The camera does Remove and reinsert the battery (P 34). If the not function as problem persists, contact your FUJIFILM dealer. expected. No sound. Adjust the volume (P 210). Technical Notes 12 331 Warning Messages and Displays The following warnings appear in the display. Warning Technical Notes 12 Description Low battery. Charge the battery or insert a fuli (red) ly-charged spare battery. Battery exhausted. Charge the battery or insert a j (blinks red) fully-charged spare battery. s (displayed in The camera can not focus. Use focus lock to focus red with red focus on another subject at the same distance, then reframe) compose the picture. The subject is too bright or too dark and the picAperture or ture will be over- or under-exposed. Use the flash shutter speed for additional lighting when taking photographs of displayed in red poorly-lit subject. FOCUS ERROR LENS CONTROL Camera malfunction. Turn the camera off and ERROR then on again. If the message persists, contact a TURN OFF THE CAMERA AND FUJIFILM dealer. TURN ON AGAIN The shutter can only be released when a memory NO CARD card is inserted. Insert a memory card. • The memory card is not formatted or the memory card has been formatted in a computer or other device: ForCARD NOT INITIALIZED mat the memory card using D USER SETTING > FORMAT. 332 Warning Messages and Displays Warning Description • The memory card contacts require cleaning: Clean the contacts with a soft, dry cloth. If the message is repeated, format the card. If the message persists, replace the card. • Camera malfunction: Contact a FUJIFILM dealer. Turn the camera off, remove the lens, and clean the mounting surfaces, then replace the lens and turn LENS ERROR the camera on. If the problem persists, contact a FUJIFILM dealer. • The memory card is not formatted for use in the camera: Format the card. • The memory card contacts require cleaning or the memory card is damaged: Clean the contacts with a soft, dry CARD ERROR cloth. If the message is repeated, format the card. If the message persists, replace the card. • Incompatible memory card: Use a compatible card. • Camera malfunction: Contact a FUJIFILM dealer. PROTECTED CARD The memory card is locked. Unlock the card. The memory card is incorrectly formatted. Use the BUSY camera to format the card. The memory card is full and pictures can not be b MEMORY FULL recorded. Delete pictures or insert a memory card with more free space. • Memory card error or connection error: Reinsert the card or turn the camera off and then on again. If WRITE ERROR the message persists, contact a FUJIFILM dealer. CARD NOT INITIALIZED (continued) Technical Notes 333 12 Warning Description • Not enough memory remaining to record additional pictures: Delete pictures or insert a memory card with more free space. • The memory card is not formatted: Format the memory card. The camera has run out of frame numbers (current frame number is 999-9999). Format the memory card and select RENEW for D SAVE DATA SET-UP > FRAME NO. FULL FRAME NO.. Take a picture to reset frame numbering to 100-0001, then select CONTINUOUS for FRAME NO.. • The file is corrupt or was not created with the camera: The file can not be viewed. • The memory card contacts require cleaning: Clean the contacts with a soft, dry cloth. If the message is READ ERROR repeated, format the card. If the message persists, replace the card. • Camera malfunction: Contact a FUJIFILM dealer. An attempt was made to delete or rotate to a proPROTECTED FRAME tected picture. Remove protection and try again. The picture is damaged or was not created with the CAN NOT CROP camera. Print orders can contain no more than 999 pictures. DPOF FILE ERROR Copy any additional pictures you wish to print to another memory card and create a second print order. CAN NOT ROTATE The selected picture can not be rotated. WRITE ERROR (continued) Technical Notes 12 334 Warning Messages and Displays Technical Notes Warning Description F CAN NOT Movies can not be rotated. ROTATE CAN NOT SET DPOF The picture can not be printed using DPOF. F CAN NOT SET Movies can not be printed using DPOF. DPOF F CANNOT Red-eye removal can not be applied to movies. EXECUTE Red-eye removal can not be applied to pictures crem CANNOT ated with other devices. EXECUTE MISMATCH: 4K MODE AND The movie mode selected with the camera is not EXTERNAL compatible with the device to which the camera is connected via HDMI. Try selecting a different movie MONITOR CHANGE MOVIE mode. MODE Turn the camera off and wait for it to cool. Mottling p (yellow) may increase in pictures taken when this warning is displayed. Turn the camera off and wait for it to cool. While this warning is displayed, movies can not be rep (red) corded, mottling may increase, and performance, including frame advance rate and display quality, may drop. 12 335 Memory Card Capacity The following table shows the recording time or number of pictures available at different image sizes. All figures are approximate; file size varies with the scene recorded, producing wide variations in the number of files that can be stored. The number of exposures or length remaining may not diminish at an even rate. 8 GB 16 GB FINE NORMAL FINE NORMAL 540 800 1110 1660 RAW (UNCOMPRESSED) 150 320 RAW (LOSSLESS COMPRESSED) 310 640 9 minutes 20 minutes U2160/29.97P, 25P, 24P, 23.98P 2 20 minutes i1080/59.94P, 50P, 29.97P, 25P, 24P, 23.98P 3 9 minutes 39 minutes h720/59.94P, 50P, 29.97P, 25P, 24P, 23.98P 4 19 minutes Capacity Photos Movies 1 Technical Notes 12 T O 3∶2 1 Use a UHS speed class 3 card or better. 2 Individual movies can not exceed 10 minutes in length, or 30 minutes if filmed using a power booster grip. 3 Individual movies can not exceed 15 minutes in length, or 30 minutes if filmed using a power booster grip. 4 Individual movies can not exceed 30 minutes in length. O Although movie recording will continue without interruption when the file size reaches 4 GB, subsequent footage will be recorded to a separate file which must be viewed separately. 336 Specifications System Model Product Number Effective pixels Image sensor Storage media Memory card slots File system File format FUJIFILM X-T2 FF160001 Approx. 24.3 million 23.5 mm × 15.6 mm (APS-C), X-Trans CMOS III sensor with primary color filter FUJIFILM-recommended SD/SDHC/SDXC memory cards Two SD memory card slots Compliant with Design Rule for Camera File System (DCF), Exif 2.3, and Digital Print Order Format (DPOF) • Still pictures: Exif 2.3 JPEG (compressed); RAW (original RAF format, uncompressed or compressed using a lossless algorithm; special purpose software required); RAW+JPEG available • Movies: H.264 standard with stereo sound (MOV) O3∶2 (6000 × 4000) O16∶9 (6000 × 3376) O1∶1 (4000 × 4000) P3∶2 (4240 × 2832) P16∶9 (4240 × 2384) P1∶1 (2832 × 2832) Q3∶2 (3008 × 2000) Q16∶9 (3008 × 1688) Q1∶1 (2000 × 2000) RAW (6000 × 4000) O panorama: vertical (2160 × 9600)/horizontal (9600 × 1440) P panorama: vertical (2160 × 6400)/horizontal (6400 × 1440) Lens mount FUJIFILM X mount Technical Notes Image size 12 337 System Sensitivity • Still pictures: Standard output sensitivity equiv- alent to ISO 200 – 12800 in increments of ⁄ EV; AUTO; extended output sensitivity equivalent to ISO 100, 125, 160, 25600, or 51200 • Movies: Standard output sensitivity equivalent to ISO 200 – 12800 in increments of ⁄ EV Metering 256-segment through-the-lens (TTL) metering; MULTI, SPOT, AVERAGE, CENTER WEIGHTED Exposure control Programmed AE (with program shift); shutter-priority AE; aperture-priority AE; manual exposure Exposure compensation • Still pictures: −5 EV – +5 EV in increments of ⁄ EV • Movies: −2 EV–+2 EV in increments of ⁄ EV Shutter speed Mode P Other modes Time Bulb 15 min. to 15 min. Max. 60 min. ⁄ s to ⁄ s 15 min. Electronic shutter 30 s to ⁄ s (P, S, A, M) Fixed at 1 s to ⁄ s Mechanical+ 4 s to 15 min. to 15 min. Max. 60 min. electronic ⁄ s ⁄ s to ⁄ s Mechanical shutter 4 s to ⁄ s Technical Notes 12 338 Specifications System Continuous Frame rate Frames per burst 14 fps 14 Up to approximately 42 CH 11 fps 11 Up to approximately 51 8.0 Up to approximately 53 8.0 fps 5.0 Up to approximately 56 5.0 fps 4.0 Up to approximately 58 CL 4.0 fps 3.0 Up to approximately 62 3.0 fps Note that 14 fps is available only with the electronic shutter and 11 fps only with the electronic shutter or a power booster grip (available separately). O The frame rate varies with shooting conditions and the number of images recorded. In addition, the frame rate and number of frames per burst may vary depending on the type of memory card used. Focus • Mode: Single or continuous AF; manual focus with focus ring selection: SINGLE POINT, ZONE, WIDE/TRACKING, ALL • Autofocus system: Intelligent hybrid AF (TTL contrast-detect/phase-detection AF) with AF-assist illuminator • Focus-area Technical Notes 12 339 System White balance Self-timer Flash mode Hot shoe Sync contact Sync terminal Viewfinder Technical Notes LCD monitor 12 340 Custom 1, Custom 2, Custom 3, color temperature selection, auto, direct sunlight, shade, daylight fluorescent, warm white fluorescent, cool white fluorescent, incandescent, underwater Off, 2 sec., 10 sec. • MODE: TTL MODE (FLASH AUTO, STANDARD, SLOW SYNC.), MANUAL, COMMANDER, OFF • SYNC. MODE: 1ST CURTAIN, 2ND CURTAIN • RED EYE REMOVAL: e FLASH+REMOVAL, L FLASH, d REMOVAL, OFF Accessory shoe with TTL contacts X contact; supports sync speeds as fast as ½ s Provided 0.5-in., 2360k-dot color OLED viewfinder with diopter adjustment (−4 to +2 m−1); magnification 0.77× with 50 mm lens (35 mm format equivalent) at infinity and diopter set to −1.0 m−1; diagonal angle of view approximately 38.0° (horizontal angle of view approximately 31.0°); eye point approx. 23 mm 3.0-in/7.6 cm, 1040k-dot color LCD monitor with 3-way tilt Specifications System Movies (with stereo U 2160/29.97P U 2160/25P sound) U 2160/24P U 2160/23.98P i 1080/59.94P i 1080/50P i 1080/29.97P i 1080/25P i 1080/24P i 1080/23.98P h 720/59.94P h 720/50P h 720/29.97P h 720/25P h 720/24P h 720/23.98P Input/output terminals Microphone connector ⌀3.5 mm mini-stereo jack Digital input/output USB3.0/USB2.0 High-Speed Micro USB connector (Micro-B) HDMI output HDMI Micro connector (Type D) Remote release ⌀2.5 mm connector Technical Notes 12 341 Technical Notes 12 Power supply/other Power supply NP-W126S rechargeable battery (supplied with camera) Battery life • Battery type: NP-W126S • Number of frames: PERFORMANCE LCD EVF BOOST Approx. 260 Approx. 200 NORMAL Approx. 340 Approx. 330 Approximate number of frames that can be taken with an XF 35 mm f/1.4 R lens and a fully-charged battery in mode P. CIPA standard, measured using battery supplied with camera and SD memory card. Note: Number of shots that can be taken with battery varies with battery charge level and will decline at low temperatures. Camera size 132.5 mm × 91.8 mm × 49.2 mm (35.4 mm (W × H × D) excluding projections, measured at thinnest part)/ 5.2 in. × 3.6 in. × 1.9 in. (1.4 in.) Camera weight Approx. 457 g/16.1 oz., excluding battery, accessories, and memory card Shooting weight Approx. 507 g/17.9 oz., including battery and memory card Operating conditions • Temperature: −10 °C to +40 °C/ +14 °F to +104 °F • Humidity: 10% to 80% (no condensation) 342 Specifications Wireless transmitter Standards IEEE 802.11b/g/n (standard wireless protocol) Operating frequency • U. S. A., Canada, Taiwan: 2,412 MHz–2,462 MHz (11 channels) • Other countries: 2,412 MHz–2,472 MHz (13 channels) Access protocols Infrastructure EF-X8 shoe-mounted flash unit Guide number GN8 (ISO100), GN11 (ISO200) Dimensions 39.7 mm × 24.2 mm × 63.4 mm/ 1.6 in. × 1.0 in. × 2.5 in. (W × H × D) Weight Approx. 41 g/1.4 oz. Technical Notes NP-W126S rechargeable battery Nominal voltage 7.2 V Nominal capacity 1260 mAh Operating 0 °C to +40 °C/ temperature +32 °F to +104 °F Dimensions 36.4 mm × 47.1 mm × 15.7 mm/ 1.4 in. × 1.9 in. × 0.6 in. (W × H × D) Weight Approx. 47 g/1.7 oz. 12 343 Specifications BC-W126 battery charger Rated input 100 V – 240 V AC, 50/60 Hz Input capacity 13 –21 VA Rated output 8.4 V DC, 0.6 A Supported batteries NP-W126S rechargeable batteries Charging time Approx. 150 minutes (+20 °C/+68 °F) Operating 5 °C to +40 °C/ temperature +41 °F to +104 °F Dimensions 65 mm × 91.5 mm × 28 mm/ 2.6 in. × 3.6 in. × 1.1 in., excluding projections (W × H × D) Weight Approx. 77 g/2.7 oz., excluding battery Weight and dimensions vary with the country or region of sale. Labels, menus, and other displays may differ from those on the actual camera. O Specifications and performance are subject to change without notice. FUJIFILM will not be held liable for any errors this manual may contain. The appearance of the product may differ from that described in this manual. Technical Notes 12 344 MEMO 345
advertisement