advertisement
▼
Scroll to page 2
of
354
FF200001 Owner’s Manual BL00005078-201 EN Introduction Thank you for your purchase of this product. Be sure that you have read this manual and understood its contents before using the camera. Keep the manual where it will be read by all who use the product. For the Latest Information The latest versions of the manuals are available from: http://fujifilm-dsc.com/en/manual/ The site can be accessed not only from your computer but also from smartphones and tablets. It also contains information on the software license. For information on firmware updates, visit: https://fujifilm-x.com/support/download/firmware/cameras/ ii P Chapter Index Menu List 1 Before You Begin iv 1 2 First Steps 27 3 Basic Photography and Playback 41 4 Movie Recording and Playback 47 5 Taking Photographs 55 6 The Shooting Menus 105 7 Playback and the Playback Menu 179 8 The Setup Menus 205 9 Shortcuts 241 10 Peripherals and Optional Accessories 257 11 Connections 275 12 Technical Notes 291 iii Menu List Camera menu options are listed below. Menu List Shooting Menus Adjust settings when shooting photos or movies. N See page 105 for details. Photo Menus N Items marked with both x and F icons are available in both the still photography and movie shooting menus. Changes to these items in either menu also apply to the item in the remaining menu. H IMAGE QUALITY SETTING IMAGE SIZE IMAGE QUALITY RAW RECORDING FILM SIMULATION 1⁄3 MONOCHROMATIC COLOR GRAIN EFFECT COLOR CHROME EFFECT COLOR CHROME FX BLUE WHITE BALANCE DYNAMIC RANGE D RANGE PRIORITY TONE CURVE 2⁄3 COLOR SHARPNESS HIGH ISO NR CLARITY LONG EXPOSURE NR LENS MODULATION OPTIMIZER COLOR SPACE 3⁄3 PIXEL MAPPING EDIT/SAVE CUSTOM SETTING xF MOUNT ADAPTOR SETTING iv P G AF/MF SETTING FOCUS AREA 106 FOCUS MODE 107 AF MODE 108 108 AF-C CUSTOM SETTINGS 1⁄3 STORE AF MODE BY ORIENTATION 110 110 AF POINT DISPLAY yz 110 NUMBER OF FOCUS POINTS 111 PRE-AF 111 xF AF ILLUMINATOR 115 FACE/EYE DETECTION SETTING 116 AF+MF 116 MF ASSIST 2⁄3 117 FOCUS CHECK 117 INTERLOCK SPOT AE & FOCUS AREA 117 xF INSTANT AF SETTING 118 xF DEPTH-OF-FIELD SCALE 118 RELEASE/FOCUS PRIORITY 118 3⁄3 xF AF RANGE LIMITER 119 xF TOUCH SCREEN MODE 119 120 120 P 122 122 122 123 127 127 127 128 128 129 131 132 132 133 133 133 134 134 135 Menu List P F FLASH SETTING FLASH FUNCTION SETTING RED EYE REMOVAL TTL-LOCK MODE LED LIGHT SETTING COMMANDER SETTING CH SETTING 148 148 149 149 150 150 B MOVIE SETTING MOVIE MODE FILE FORMAT FULL HD HIGH SPEED REC F IS MODE F IS MODE BOOST AUDIO SETTING MIC/REMOTE RELEASE 151 151 151 151 151 152 153 P v Menu List P A SHOOTING SETTING SCENE POSITION 137 FILTER SETTING 137 SPORTS FINDER MODE 138 138 PRE-SHOT sJ 1⁄3 SELF-TIMER 139 SAVE SELF-TIMER SETTING 139 SELF-TIMER LAMP 140 INTERVAL TIMER SHOOTING 140 INTERVAL TIMER SHOOTING 141 EXPOSURE SMOOTHING AE BKT SETTING 142 FILM SIMULATION BKT 142 143 2⁄3 FOCUS BKT SETTING PHOTOMETRY 143 SHUTTER TYPE 144 FLICKER REDUCTION 145 IS MODE 146 ISO 146 3⁄3 xF WIRELESS COMMUNICATION 147 Movie Menus N Items marked with both x and F icons are available in both the still photography and movie shooting menus. Changes to these items in either menu also apply to the item in the remaining menu. Menu List P P H IMAGE QUALITY SETTING B MOVIE SETTING SHOOTING MODE 154 163 F FILM SIMULATION MOVIE MODE 154 163 F MONOCHROMATIC COLOR FILE FORMAT 155 163 F WHITE BALANCE FULL HD HIGH SPEED REC 156 164 F DYNAMIC RANGE 1⁄3 1⁄2 FIX MOVIE CROP MAGNIFICATION C 157 164 F TONE CURVE F-Log RECORDING 157 164 F COLOR 4K MOVIE OUTPUT 158 165 F SHARPNESS FULL HD MOVIE OUTPUT 158 165 F HIGH ISO NR HDMI OUTPUT INFO DISPLAY 159 V INTERFRAME NR 165 4K HDMI STANDBY QUALITY 159 2⁄2 F PERIPHERAL LIGHT CORRECTION 166 HDMI REC CONTROL 159 xF MOUNT ADAPTOR SETTING 166 F PHOTOMETRY 159 2⁄3 F IS MODE 160 F IS MODE BOOST 160 F ISO 161 ZEBRA SETTING 161 ZEBRA LEVEL 161 MOVIE OPTIMIZED CONTROL oL 161 3⁄3 TALLY LIGHT 162 xF WIRELESS COMMUNICATION 162 vi Menu List P P AUDIO SETTING 167 167 167 168 168 169 169 170 170 170 170 171 173 INTERNAL MIC LEVEL ADJUSTMENT EXTERNAL MIC LEVEL ADJUSTMENT MIC JACK SETTING MIC LEVEL LIMITER WIND FILTER LOW CUT FILTER HEADPHONES VOLUME MIC/REMOTE RELEASE Q TIME CODE SETTING TIME CODE DISPLAY START TIME SETTING COUNT UP SETTING DROP FRAME HDMI TIME CODE OUTPUT P 174 174 175 175 175 175 175 176 P 177 177 177 178 178 vii Menu List G AF/MF SETTING F FOCUS AREA F FOCUS MODE F AF MODE F AF-C CUSTOM SETTING 1⁄2 xF AF ILLUMINATOR F FACE/EYE DETECTION SETTING F MF ASSIST F FOCUS CHECK xF INSTANT AF SETTING xF DEPTH-OF-FIELD SCALE 2⁄2 xF AF RANGE LIMITER xF TOUCH SCREEN MODE FOCUS CHECK LOCK The Playback Menu Adjust playback settings. N See page 185 for details. Menu List C PLAY BACK MENU RAW CONVERSION ERASE CROP RESIZE 1⁄3 PROTECT IMAGE ROTATE RED EYE REMOVAL VOICE MEMO SETTING viii P C PLAY BACK MENU P 185 RATING 196 188 IMAGE TRANSFER ORDER 197 190 xF WIRELESS COMMUNICATION 198 191 SLIDE SHOW 198 2⁄3 192 PHOTOBOOK ASSIST 199 193 PC AUTO SAVE 200 194 PRINT ORDER (DPOF) 201 195 instax PRINTER PRINT 202 3⁄3 DISP ASPECT 203 Menu List Setup Menus Adjust basic camera settings. N See page 205 for details. D SOUND SETTING AF BEEP VOL. SELF-TIMER BEEP VOL. OPERATION VOL. SHUTTER VOLUME SHUTTER SOUND PLAYBACK VOLUME P D SCREEN SETTING P VIEW MODE SETTING 213 206 EVF BRIGHTNESS 213 207 EVF COLOR 213 207 EVF COLOR ADJUSTMENT 214 208 1⁄3 LCD BRIGHTNESS 214 208 LCD COLOR 214 208 LCD COLOR ADJUSTMENT 214 209 IMAGE DISP. 215 209 AUTOROTATE DISPLAYS 215 210 PREVIEW EXP./WB IN MANUAL MODE 216 210 NATURAL LIVE VIEW 216 P F-Log VIEW ASSIST 217 211 2⁄3 FRAMING GUIDELINE 217 211 AUTOROTATE PB 218 212 FOCUS SCALE UNITS 218 212 APERTURE UNIT FOR CINEMA LENS 218 212 DISP. CUSTOM SETTING 218 212 LARGE INDICATORS MODE(EVF) 219 LARGE INDICATORS MODE(LCD) 219 3⁄3 LARGE INDICATORS DISP. SETTING 220 INFORMATION CONTRAST ADJ. 220 x Q MENU BACKGROUND 221 221 F Q MENU BACKGROUND ix Menu List D USER SETTING FORMAT DATE/TIME TIME DIFFERENCE Qa 1⁄2 x MY MENU SETTING F MY MENU SETTING SENSOR CLEANING SOUND & FLASH RESET 2⁄2 REGULATORY Menu List P D CONNECTION SETTING Menu List D BUTTON/DIAL SETTING FOCUS LEVER SETTING x EDIT/SAVE QUICK MENU F EDIT/SAVE QUICK MENU FUNCTION (Fn) SETTING 1⁄2 SHUTTER AF SHUTTER AE SHOOT WITHOUT LENS SHOOT WITHOUT CARD FOCUS RING FOCUS RING OPERATION 2⁄2 AE/AF-LOCK MODE AWB-LOCK MODE TOUCH SCREEN SETTING 222 223 223 223 224 224 225 225 225 225 226 226 227 D POWER MANAGEMENT AUTO POWER OFF PERFORMANCE BOOST SETTING 229 230 230 D SAVE DATA SETTING FRAME NO. SAVE ORG IMAGE EDIT FILE NAME SELECT FOLDER COPYRIGHT INFO 231 232 232 233 233 x P P P Bluetooth SETTINGS 234 PC AUTO SAVE 235 instax PRINTER CONNECTION SETTING 236 CONNECTION MODE 237 USB POWER SUPPLY SETTING 238 GENERAL SETTINGS 239 INFORMATION 239 RESET WIRELESS SETTING 239 P Table of Contents Introduction ....................................................................................................ii For the Latest Information ................................................................................... ii Menu List .........................................................................................................iv Shooting Menus ........................................................................................................iv The Playback Menu ...............................................................................................viii Setup Menus ...............................................................................................................ix Supplied Accessories ............................................................................. xxiii About This Manual .................................................................................. xxiv Symbols and Conventions .............................................................................xxiv Terminology ............................................................................................................xxiv 1 Before You Begin 1 Parts of the Camera ......................................................................................2 Camera Functions .........................................................................................4 The Mode Dial .............................................................................................................4 The Focus Stick (Focus Lever).............................................................................5 I (Drive) Button .......................................................................................................5 The Command Dials ................................................................................................6 The Fn (Function) Dial .............................................................................................7 The Indicator Lamp ..................................................................................................8 The LCD Monitor ........................................................................................................9 Focusing the Viewfinder........................................................................................9 Camera Displays.......................................................................................... 10 The Electronic Viewfinder .................................................................................. 10 The LCD Monitor ..................................................................................................... 12 Adjusting Display Brightness........................................................................... 14 Display Rotation ...................................................................................................... 14 Choosing a Display Mode ................................................................................. 14 The DISP/BACK Button ........................................................................................ 16 Customizing the Standard Display .............................................................. 17 Using the Menus......................................................................................... 19 The Menus .................................................................................................................. 19 Selecting a Menu Tab........................................................................................... 20 xi Touch Screen Mode ................................................................................... 21 Shooting Touch Controls ................................................................................... 21 Playback Touch Controls .................................................................................... 25 2 First Steps 27 3 Basic Photography and Playback 41 4 Movie Recording and Playback 47 5 Taking Photographs 55 Attaching the Strap ................................................................................... 28 Attaching a Lens ......................................................................................... 29 Inserting the Battery and a Memory Card ......................................... 30 Compatible Memory Cards .............................................................................. 32 Charging the Battery ................................................................................. 33 Turning the Camera On and Off............................................................ 35 Checking the Battery Level ..................................................................... 36 Basic Setup.................................................................................................... 37 Choosing a Different Language .................................................................... 39 Changing the Time and Date.......................................................................... 39 Taking Photographs .................................................................................. 42 Viewing Pictures ......................................................................................... 44 Deleting Pictures ........................................................................................ 45 Recording Movies....................................................................................... 48 Recording Movies................................................................................................... 48 Adjusting Movie Settings .................................................................................. 51 Viewing Movies ........................................................................................... 52 Choosing a Shooting Mode .................................................................... 56 Y (AUTO) ................................................................................................................... 56 Program AE (P).......................................................................................................... 57 Shutter-Priority AE (S) ........................................................................................... 58 Aperture-Priority AE (A) ...................................................................................... 60 Manual Exposure (M)............................................................................................ 62 SP SCENE POSITION ............................................................................................... 64 xii Table of Contents FILTER ............................................................................................................................. 66 Custom Modes ......................................................................................................... 67 The Command and Function Dials.............................................................. 69 Autofocus ...................................................................................................... 70 Focus Mode................................................................................................................ 71 Autofocus Options (AF Mode) ........................................................................ 73 Focus-Point Selection .......................................................................................... 75 Manual Focus ............................................................................................... 79 Checking Focus........................................................................................................ 80 Exposure Compensation ......................................................................... 82 Sensitivity ...................................................................................................... 83 Auto Sensitivity (A)................................................................................................. 84 Metering ........................................................................................................ 85 Focus/Exposure Lock ................................................................................ 86 Other Controls .......................................................................................................... 87 Bracketing ..................................................................................................... 88 W ISO BKT.................................................................................................................. 89 V WHITE BALANCE BKT.................................................................................... 89 s Bracketing............................................................................................................ 90 Continuous Shooting (Burst Mode) ..................................................... 93 HDR.................................................................................................................. 94 Panoramas .................................................................................................... 96 Multiple Exposures .................................................................................... 99 Flash Photography ...................................................................................101 Flash Settings ......................................................................................................... 103 6 The Shooting Menus 105 IMAGE QUALITY SETTING (Still Photography)................................106 IMAGE SIZE............................................................................................................... 106 IMAGE QUALITY .................................................................................................... 107 RAW RECORDING ................................................................................................. 108 FILM SIMULATION................................................................................................ 108 MONOCHROMATIC COLOR ........................................................................... 110 GRAIN EFFECT ........................................................................................................ 110 COLOR CHROME EFFECT ................................................................................ 110 xiii COLOR CHROME FX BLUE............................................................................... 111 WHITE BALANCE................................................................................................... 111 DYNAMIC RANGE ................................................................................................. 115 D RANGE PRIORITY.............................................................................................. 116 TONE CURVE ........................................................................................................... 116 COLOR......................................................................................................................... 117 SHARPNESS.............................................................................................................. 117 HIGH ISO NR ............................................................................................................ 117 CLARITY...................................................................................................................... 118 LONG EXPOSURE NR .......................................................................................... 118 LENS MODULATION OPTIMIZER ................................................................. 118 COLOR SPACE ......................................................................................................... 119 PIXEL MAPPING ..................................................................................................... 119 EDIT/SAVE CUSTOM SETTING....................................................................... 120 xF MOUNT ADAPTER SETTING ............................................................. 120 AF/MF SETTING (Still Photography)...................................................122 FOCUS AREA ........................................................................................................... 122 FOCUS MODE......................................................................................................... 122 AF MODE................................................................................................................... 122 AF-C CUSTOM SETTINGS ................................................................................ 123 STORE AF MODE BY ORIENTATION............................................................ 127 AF POINT DISPLAY yz ................................................................................ 127 NUMBER OF FOCUS POINTS ......................................................................... 127 PRE-AF......................................................................................................................... 128 xF AF ILLUMINATOR .................................................................................... 128 FACE/EYE DETECTION SETTING .................................................................. 129 AF+MF ........................................................................................................................ 131 MF ASSIST ................................................................................................................. 132 FOCUS CHECK........................................................................................................ 132 INTERLOCK SPOT AE & FOCUS AREA ....................................................... 133 xF INSTANT AF SETTING ........................................................................... 133 xF DEPTH-OF-FIELD SCALE .................................................................... 133 RELEASE/FOCUS PRIORITY ............................................................................. 134 xF AF RANGE LIMITER ................................................................................ 134 xF TOUCH SCREEN MODE....................................................................... 135 xiv Table of Contents SHOOTING SETTING (Still Photography) ..........................................137 SCENE POSITION .................................................................................................. 137 FILTER SETTING...................................................................................................... 137 SPORTS FINDER MODE ..................................................................................... 138 PRE-SHOT sJ .................................................................................................... 138 SELF-TIMER ............................................................................................................... 139 SAVE SELF-TIMER SETTING ............................................................................. 139 SELF-TIMER LAMP ................................................................................................ 140 INTERVAL TIMER SHOOTING.......................................................................... 140 INTERVAL TIMER SHOOTING EXPOSURE SMOOTHING ................. 141 AE BKT SETTING .................................................................................................... 142 FILM SIMULATION BKT ...................................................................................... 142 FOCUS BKT SETTING .......................................................................................... 143 PHOTOMETRY ........................................................................................................ 143 SHUTTER TYPE ....................................................................................................... 144 FLICKER REDUCTION ......................................................................................... 145 IS MODE ..................................................................................................................... 146 ISO ................................................................................................................................. 146 xF WIRELESS COMMUNICATION ......................................................... 147 FLASH SETTING (Still Photography)...................................................148 FLASH FUNCTION SETTING ........................................................................... 148 RED EYE REMOVAL .............................................................................................. 148 TTL-LOCK MODE ................................................................................................... 149 LED LIGHT SETTING ............................................................................................ 149 COMMANDER SETTING.................................................................................... 150 CH SETTING ............................................................................................................. 150 MOVIE SETTING (Still Photography) ..................................................151 MOVIE MODE.......................................................................................................... 151 FILE FORMAT ........................................................................................................... 151 FULL HD HIGH SPEED REC ............................................................................. 151 F IS MODE.............................................................................................................. 151 F IS MODE BOOST ............................................................................................ 151 AUDIO SETTING .................................................................................................... 152 MIC/REMOTE RELEASE ...................................................................................... 153 xv MOVIE SETTING (Movie Recording) ...................................................154 SHOOTING MODE................................................................................................ 154 MOVIE MODE.......................................................................................................... 154 FILE FORMAT ........................................................................................................... 155 FULL HD HIGH SPEED REC ............................................................................. 156 FIX MOVIE CROP MAGNIFICATION C .................................................. 157 F-Log RECORDING............................................................................................... 157 4K MOVIE OUTPUT .............................................................................................. 158 FULL HD MOVIE OUTPUT................................................................................ 158 HDMI OUTPUT INFO DISPLAY ...................................................................... 159 4K HDMI STANDBY QUALITY......................................................................... 159 HDMI REC CONTROL.......................................................................................... 159 F PHOTOMETRY ................................................................................................. 159 F IS MODE.............................................................................................................. 160 F IS MODE BOOST ............................................................................................ 160 F ISO.......................................................................................................................... 161 ZEBRA SETTING ..................................................................................................... 161 ZEBRA LEVEL ........................................................................................................... 161 MOVIE OPTIMIZED CONTROL oL ......................................................... 161 TALLY LIGHT............................................................................................................. 162 xF WIRELESS COMMUNICATION ......................................................... 162 IMAGE QUALITY SETTING (Movie Recording) ................................163 F FILM SIMULATION ........................................................................................ 163 F MONOCHROMATIC COLOR .................................................................... 163 F WHITE BALANCE............................................................................................ 163 F DYNAMIC RANGE.......................................................................................... 164 F TONE CURVE .................................................................................................... 164 F COLOR ................................................................................................................. 164 F SHARPNESS ...................................................................................................... 165 F HIGH ISO NR..................................................................................................... 165 V INTERFRAME NR........................................................................................... 165 F PERIPHERAL LIGHT CORRECTION ....................................................... 166 xF MOUNT ADAPTER SETTING ............................................................. 166 AF/MF SETTING (Movie Recording) ...................................................167 F FOCUS AREA .................................................................................................... 167 F FOCUS MODE ................................................................................................. 167 xvi Table of Contents F AF MODE ........................................................................................................... 167 F AF-C CUSTOM SETTING ............................................................................ 168 xF AF ILLUMINATOR .................................................................................... 168 F FACE/EYE DETECTION SETTING ........................................................... 169 F MF ASSIST .......................................................................................................... 169 F FOCUS CHECK ................................................................................................ 170 xF INSTANT AF SETTING ........................................................................... 170 xF DEPTH-OF-FIELD SCALE .................................................................... 170 xF AF RANGE LIMITER ................................................................................ 170 xF TOUCH SCREEN MODE....................................................................... 171 FOCUS CHECK LOCK .......................................................................................... 173 AUDIO SETTING (Movie Recording) ...................................................174 INTERNAL MIC LEVEL ADJUSTMENT ........................................................ 174 EXTERNAL MIC LEVEL ADJUSTMENT ....................................................... 174 MIC JACK SETTING .............................................................................................. 175 MIC LEVEL LIMITER .............................................................................................. 175 WIND FILTER ............................................................................................................ 175 LOW CUT FILTER ................................................................................................... 175 HEADPHONES VOLUME ................................................................................... 175 MIC/REMOTE RELEASE ...................................................................................... 176 TIME CODE SETTING (Movie Recording) ..........................................177 TIME CODE DISPLAY ........................................................................................... 177 START TIME SETTING .......................................................................................... 177 COUNT UP SETTING ........................................................................................... 177 DROP FRAME .......................................................................................................... 178 HDMI TIME CODE OUTPUT ............................................................................ 178 7 Playback and the Playback Menu 179 The Playback Display...............................................................................180 The DISP/BACK Button ..................................................................................... 181 Viewing Pictures .......................................................................................183 Playback Zoom...................................................................................................... 184 Multi-Frame Playback ........................................................................................ 184 The Playback Menu..................................................................................185 RAW CONVERSION .............................................................................................. 185 ERASE .......................................................................................................................... 188 xvii CROP ............................................................................................................................ 190 RESIZE ......................................................................................................................... 191 PROTECT.................................................................................................................... 192 IMAGE ROTATE ....................................................................................................... 193 RED EYE REMOVAL .............................................................................................. 194 VOICE MEMO SETTING ..................................................................................... 195 RATING........................................................................................................................ 196 IMAGE TRANSFER ORDER................................................................................ 197 xF WIRELESS COMMUNICATION ......................................................... 198 SLIDE SHOW............................................................................................................ 198 PHOTOBOOK ASSIST .......................................................................................... 199 PC AUTO SAVE ....................................................................................................... 200 PRINT ORDER (DPOF)......................................................................................... 201 instax PRINTER PRINT......................................................................................... 202 DISP ASPECT ........................................................................................................... 203 8 The Setup Menus 205 USER SETTING ............................................................................................206 FORMAT ..................................................................................................................... 206 DATE/TIME................................................................................................................ 207 TIME DIFFERENCE ................................................................................................ 207 Qa ......................................................................................................... 208 x MY MENU SETTING ..................................................................................... 208 F MY MENU SETTING...................................................................................... 208 SENSOR CLEANING ............................................................................................. 209 SOUND & FLASH................................................................................................... 209 RESET ........................................................................................................................... 210 REGULATORY .......................................................................................................... 210 SOUND SETTING .......................................................................................211 AF BEEP VOL. ........................................................................................................... 211 SELF-TIMER BEEP VOL. ....................................................................................... 211 OPERATION VOL.................................................................................................... 212 SHUTTER VOLUME............................................................................................... 212 SHUTTER SOUND ................................................................................................. 212 PLAYBACK VOLUME ............................................................................................ 212 xviii Table of Contents SCREEN SETTING.......................................................................................213 VIEW MODE SETTING ........................................................................................ 213 EVF BRIGHTNESS................................................................................................... 213 EVF COLOR ............................................................................................................... 213 EVF COLOR ADJUSTMENT .............................................................................. 214 LCD BRIGHTNESS.................................................................................................. 214 LCD COLOR .............................................................................................................. 214 LCD COLOR ADJUSTMENT ............................................................................. 214 IMAGE DISP............................................................................................................... 215 AUTOROTATE DISPLAYS ................................................................................... 215 PREVIEW EXP./WB IN MANUAL MODE..................................................... 216 NATURAL LIVE VIEW............................................................................................ 216 F-Log VIEW ASSIST............................................................................................... 217 FRAMING GUIDELINE......................................................................................... 217 AUTOROTATE PB ................................................................................................... 218 FOCUS SCALE UNITS .......................................................................................... 218 APERTURE UNIT FOR CINEMA LENS ......................................................... 218 DISP. CUSTOM SETTING.................................................................................... 218 LARGE INDICATORS MODE(EVF) ................................................................. 219 LARGE INDICATORS MODE(LCD) ................................................................ 219 LARGE INDICATORS DISP. SETTING............................................................ 220 INFORMATION CONTRAST ADJ. .................................................................. 220 x Q MENU BACKGROUND........................................................................... 221 F Q MENU BACKGROUND ........................................................................... 221 BUTTON/DIAL SETTING ..........................................................................222 FOCUS LEVER SETTING ..................................................................................... 222 x EDIT/SAVE QUICK MENU .......................................................................... 223 F EDIT/SAVE QUICK MENU .......................................................................... 223 FUNCTION (Fn) SETTING ................................................................................. 223 SHUTTER AF ............................................................................................................ 224 SHUTTER AE ............................................................................................................ 224 SHOOT WITHOUT LENS .................................................................................... 225 SHOOT WITHOUT CARD .................................................................................. 225 FOCUS RING ............................................................................................................ 225 FOCUS RING OPERATION ................................................................................ 225 xix AE/AF-LOCK MODE............................................................................................. 226 AWB-LOCK MODE ................................................................................................ 226 TOUCH SCREEN SETTING ................................................................................ 227 POWER MANAGEMENT ..........................................................................229 AUTO POWER OFF ............................................................................................... 229 PERFORMANCE ..................................................................................................... 230 BOOST SETTING .................................................................................................... 230 SAVE DATA SETTING ................................................................................231 FRAME NO. ............................................................................................................... 231 SAVE ORG IMAGE ................................................................................................. 232 EDIT FILE NAME..................................................................................................... 232 SELECT FOLDER .................................................................................................... 233 COPYRIGHT INFO ................................................................................................. 233 CONNECTION SETTING ..........................................................................234 Bluetooth SETTINGS........................................................................................... 234 PC AUTO SAVE ....................................................................................................... 235 instax PRINTER CONNECTION SETTING ................................................. 236 CONNECTION MODE ......................................................................................... 237 USB POWER SUPPLY SETTING ...................................................................... 238 GENERAL SETTINGS ............................................................................................ 239 INFORMATION........................................................................................................ 239 RESET WIRELESS SETTING ............................................................................... 239 9 Shortcuts 241 Shortcut Options ......................................................................................242 MY MENU ....................................................................................................243 MY MENU SETTING ............................................................................................. 243 The Quick Menu ........................................................................................245 The Quick Menu Display ................................................................................. 245 Viewing and Changing Settings................................................................. 247 Editing the Quick Menu................................................................................... 248 Function Controls .....................................................................................251 The Function Buttons........................................................................................ 251 The Function Dial................................................................................................. 254 Touch-Function Gestures ............................................................................... 255 xx Table of Contents 10Peripherals and Optional Accessories 257 11Connections 275 Lenses ...........................................................................................................258 Lens Parts .................................................................................................................. 258 Removing Lens Caps ......................................................................................... 259 Attaching Lens Hoods ...................................................................................... 259 Lenses with Aperture Rings .......................................................................... 260 Lenses with O.I.S. Switches ............................................................................ 261 Manual Focus Lenses ........................................................................................ 262 Lens Care................................................................................................................... 263 External Flash Units .................................................................................264 Using an External Flash .................................................................................... 265 SYNC TERMINAL.................................................................................................... 266 SHOE MOUNT FLASH ........................................................................................ 267 COMMANDER(OPTICAL).................................................................................. 270 HDMI Output..............................................................................................276 Connecting to HDMI Devices ...................................................................... 276 Shooting.................................................................................................................... 277 Playback ..................................................................................................................... 277 Wireless Connections (Bluetooth®, Wireless LAN/Wi-Fi) ............278 Smartphones and Tablets: FUJIFILM Camera Remote .................. 278 Copying Pictures to a Computer: PC AutoSave ................................ 280 Connecting via USB .................................................................................281 Connecting to Computers ............................................................................. 281 Copying Pictures to a Computer ............................................................... 284 Converting RAW Images: FUJIFILM X RAW STUDIO ....................... 285 Backing up and Restoring Camera Settings (FUJIFILM X Acquire) ....................................................................................... 285 Connecting to Smartphones ....................................................................... 286 instax SHARE Printers ..............................................................................289 Establishing a Connection ............................................................................. 289 Printing Pictures.................................................................................................... 290 xxi Table of Contents 12Technical Notes 291 Accessories from Fujifilm .......................................................................292 Software for Use with Your Camera ...................................................294 FUJIFILM Camera Remote .............................................................................. 294 FUJIFILM PC AutoSave ...................................................................................... 294 RAW FILE CONVERTER EX powered by SILKYPIX .............................. 294 Capture One Express Fujifilm ....................................................................... 294 Capture One Pro Fujifilm ................................................................................. 295 FUJIFILM X Acquire ............................................................................................. 295 FUJIFILM X RAW STUDIO ................................................................................. 295 FUJIFILM X Webcam .......................................................................................... 295 For Your Safety ...........................................................................................296 Product Care...............................................................................................305 Cleaning the Image Sensor...................................................................306 Firmware Updates ....................................................................................307 Checking the Firmware Version .................................................................. 307 Troubleshooting .......................................................................................308 Warning Messages and Displays.........................................................317 Memory Card Capacity ...........................................................................321 Specifications .............................................................................................322 xxii Supplied Accessories The following are included with the camera: • NP-W126S rechargeable battery • Body cap (comes attached to camera) • USB cable • Headphone adapter • Shoulder strap • Owner’s Manual (this manual) O The battery is not charged at shipment. Charge the battery before use (P 33). N • If you purchased a lens kit, check that a lens is included. • The supplied headphone adapter converts USB Type-C connectors to ⌀3.5 mm headphone jacks. • For information on compatible computer software, see “Software for Use with Your Camera” (P 294). xxiii About This Manual This manual contains instructions for your FUJIFILM X-S10 digital camera. Be sure you have read and understood its contents before proceeding. Symbols and Conventions The following symbols are used in this manual: O Information that should be read to prevent damage to the product. Additional information that may be helpful when using the N product. P Pages on which related information may be found. Menus and other text in the displays are shown in bold. Illustrations are for explanatory purposes only; drawings may be simplified, while photographs are not necessarily taken with the model of camera described in this manual. Terminology The optional SD, SDHC, and SDXC memory cards the camera uses to store pictures are referred to as “memory cards”. The electronic viewfinder may be referred to as the “EVF” and the LCD monitor as the “LCD”. xxiv Before You Begin 1 Parts of the Camera The parts of the camera are listed below. 1 Before You Begin A t (movie recording) button.......................48 B Q (quick menu) button ...............................245 C ISO button ......................................................251 D Rear command dial ................................6, 183 E Mode dial .............................................. 4, 42, 48 F Hot shoe .........................................................265 G Microphone ............................................ 50, 174 H Fn (function) dial .....................................7, 254 I N (flash pop-up) lever................................101 J Connector cover K Strap clip............................................................28 L Connector cover M Speaker .................................................... 52, 212 N Lens signal contacts 2 O Lens release button ........................................29 P AF-assist illuminator...................................128 Q R S T U V W X Self-timer lamp ............................................139 Tally light ........................................................162 Front command dial........................................6 ON/OFF switch .................................................35 Shutter button .................................................43 Flash ................................................................101 Body cap............................................................29 Microphone/remote release connector (⌀3.5 mm) .......................................3, 50, 153 USB connector (Type-C) ...............33, 50, 281 HDMI Micro connector (Type D) .............276 Parts of the Camera 1 Before You Begin Y I (drive) button....................................... 5, 88 i Battery-chamber cover latch ......................30 b (delete) button (playback mode) .........45 j Battery-chamber cover .................................30 Z a (playback) button ...................................44 k Cable channel cover for DC coupler .......292 a Diopter adjustment control ...........................9 l DISP (display)/BACK button ............... 16, 181 m MENU/OK button .............................................19 b Electronic viewfinder (EVF) ..................................................... 10, 14, 16, 21 n Tripod mount c Fn button........................................................251 o Vari-angle LCD monitor.................... 9, 12, 14 Touch screen .................................21, 135, 227 d AEL (exposure lock) button ................ 87, 251 e AFON button ........................................... 87, 251 p Eye sensor..........................................................15 f Strap clip............................................................28 q Memory card slot............................................30 g Indicator lamp ..........................................8, 162 r Battery chamber .............................................30 Tally light ........................................................162 s Battery latch .....................................................31 h Focus stick (focus lever)...................5, 76, 222 t Serial number plate......................... see below O V Use of an optional RR-100 remote release requires a third-party adapter to convert the three-pin, ⌀2.5 mm connector to a threepin, ⌀3.5 mm connector. t Do not remove the serial number plate, which provides the CMIIT ID, serial number, and other important information. 3 Camera Functions The Mode Dial To select a shooting mode, rotate the dial until the icon for the desired mode aligns with the index. 1 Before You Begin Mode Description P A AUTO (AUTO) The camera automatically optimizes 42 settings to the scene. B P (PROGRAM AE) Aperture and shutter speed can be ad57 justed using program shift. C S (SHUTTER PRIORITY AE) Select for full control over camera set- 58 tings, including aperture (M and A) 60 and/or shutter speed (M and S). 62 A (APERTURE PRIORITY AE) M (MANUAL) D C1/C2/C3/C4 (CUSTOM 1/2/3/4) Take pictures using previously-stored settings. E F (MOVIE) F FILTER (FILTER) G SP (SCENE POSITION) 4 67 Record movies. 48 Take photos with filter effects. 66 Choose a scene suited to the subject or shooting conditions and let the cam- 64 era do the rest. Camera Functions The Focus Stick (Focus Lever) Tilt or press the focus stick to select the focus area. The focus stick can also be used to navigate the menus. 1 I (Drive) Button Pressing the I (drive) button displays drive-mode menu, where you can choose from the following the drive modes. B J O W V Mode Single frame High-speed burst Low-speed burst ISO BKT WHITE BALANCE BKT P 56 93 93 89 89 BKT h u j Mode Bracketing HDR Panorama Multiple Exposure P 90 94 96 99 5 Before You Begin N Use D BUTTON/DIAL SETTING > FOCUS LEVER SETTING to choose the role played by the focus stick (P 222). The Command Dials The rear and front command dials are used for the operations below. Front command dial Rear command dial 1 Before You Begin • Choose the desired combination of shutter speed and aper• Adjust exposure compensation. ture (program shift). • Choose a shutter speed. Shooting Adjust aperture. • • Choose a shutter speed. • Choose a scene. Select menu tabs or page Highlight menu items. Menus through menus. Adjust settings in the quick Q Menu Select items in the quick menu. menu. • Zoom in or out (full-frame playback). Playback View other pictures. • Zoom in or out (multi-frame playback). N For information on the roles performed by the dials during shooting, see “The Command and Function Dials” (P 69). 6 Camera Functions The Fn (Function) Dial Rotate the function dial to quickly adjust settings for the assigned function during shooting. Mode FILTER (FILTER) P (PROGRAM AE) S (SHUTTER PRIORITY AE) A (APERTURE PRIORITY AE) M (MANUAL) AUTO (AUTO) SP (SCENE POSITION) F (MOVIE) C1/C2/C3/C4 (CUSTOM) Description Filter selection Film simulation N The role performed by the function dial can be chosen using D BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING (P 254). 7 1 Before You Begin At shipment, the dial is assigned the DEFAULT role. At this setting, the function performed by the dial varies with the position of the mode dial. The Indicator Lamp Camera status is shown by the indicator lamp. 1 Before You Begin Indicator lamp Glows green Blinks green Blinks green and orange Glows orange Blinks orange Blinks red Camera status Focus locked. Focus or slow shutter speed warning. Pictures can be taken. • Camera on: Recording pictures. Additional pictures can be taken. • Camera off: Uploading pictures to a smartphone or tablet. * Recording pictures. No additional pictures can be taken at this time. Flash charging; flash will not fire when picture is taken. Lens or memory error. * Displayed only if pictures are selected for upload. N • Warnings may also appear in the display. • The indicator lamp remains off while your eye is to the viewfinder. • The B MOVIE SETTING > TALLY LIGHT option can be used to choose the lamp (indicator or AF-assist) that lights during movie recording and whether the lamp blinks or remains steady. 8 Camera Functions The LCD Monitor You can adjust the angle of the LCD monitor when framing shots, but be careful not to trap your fingers or other objects. 1 Before You Begin O • Do not apply excessive force to the hinge when rotating the LCD monitor, as this could damage the hinge. • Be careful that the corners of the monitor do not contact the camera body, as this could leave marks. N The LCD monitor also functions as a touch screen that can be used for: • Touch photography (P 22) • Focus area selection (P 21) • Function selection (P 24) • Movie optimized control oL (P 23) • Full-frame playback operations (P 25) Focusing the Viewfinder If the indicators displayed in the viewfinder are blurred, put your eye to the viewfinder and rotate the diopter adjustment control until the display is in sharp focus. 9 Camera Displays This section lists the indicators that may be displayed during shooting. O For illustrative purposes, displays are shown with all indicators lit. The Electronic Viewfinder 1 Before You Begin A B CD EF G H I J K L M NO 3 2 P 1 0 z Q R y x w v u t s S 5 4 3 2 1 0 -1 -2 -3 -4 -5 r qp o 10 T U V W X Y n m l k j i hg f e dcba Z Camera Displays A Crop factor .....................................................138 B Focus check ............................................ 80, 132 C Depth-of-field preview...........................61, 80 D Location data download status.....239, 278 E Bluetooth ON/OFF.......................................234 F Image transfer status ........................234, 278 G Movie mode ........................................... 48, 154 H Full HD high-speed recording ..................156 I Recording time available/ 1 Shows “9999” if there is space for over 9999 frames. 2 Not displayed when ON is selected for D SCREEN SET-UP > LARGE INDICATORS MODE(EVF). 11 1 Before You Begin J K L M N O P Q R S T U V W X Y Z a b elapsed recording time ..............................48 Date and time..................................37, 39, 207 Number of available frames 1...................321 Image size ......................................................106 File format......................................................155 Image quality................................................107 Temperature warning ................................320 Touch screen mode .............................. 21, 135 White balance ..............................................111 AWB lock ........................................................226 Film simulation ............................................108 F-Log recording ............................................157 Dynamic range ............................................115 D-range priority ...........................................116 Movie optimized control ..............................23 Sound and flash indicator ........................209 Virtual horizon.................................................18 Boost mode ...................................................230 Histogram .........................................................18 Distance indicator 2 ........................................80 c Power supply....................................................34 d Battery level ......................................................36 e Sensitivity ..........................................................83 f Exposure compensation ...............................82 g Focus frame ...............................................75, 86 h Aperture...............................................57, 60, 62 i Time code.......................................................177 j Shutter speed .....................................57, 58, 62 k TTL lock ..................................................149, 253 l AE lock...................................................... 87, 226 m Metering ............................................................85 n Shooting mode ...............................................56 o Focus mode 2 ....................................................71 p Focus indicator 2 ..............................................72 q Manual focus indicator 2 .......................71, 79 r AF lock...................................................... 87, 226 s Mic jack setting ............................................175 t Recording level 2 ...........................................174 u AF+MF indicator 2 .......................................131 v Shutter type ...................................................144 w Continuous mode...........................................93 x Exposure indicator..........................................62 y Self-timer indicator .....................................139 z Microphone ......................................................50 0 Remote release ................................................59 1 Flash (TTL) mode .........................................267 2 IS mode 2 .........................................................146 3 Flash compensation ...................................267 The LCD Monitor H A BC D E I FG M J K L N O P Q 2 1 R Before You Begin 1 0 z S T U y x V W w X v u t s Y nm r q p o 12 lk j i h g f e d cbaZ Camera Displays elapsed recording time ..............................48 L Number of available frames 1...................321 M Image size ......................................................106 N File format......................................................155 O Image quality................................................107 P Date and time..................................37, 39, 207 Q Touch screen mode .............................. 21, 135 R AWB lock ........................................................226 S White balance ..............................................111 T Film simulation ............................................108 U F-Log recording ............................................157 V Dynamic range ............................................115 W D-range priority ...........................................116 X Movie optimized control ..............................23 Y Boost mode ...................................................230 Z Temperature warning ................................320 a Sound and flash indicator ........................209 b Power supply....................................................34 c Battery level ......................................................36 d Distance indicator 2 ........................................80 e Sensitivity ..........................................................83 f Histogram .........................................................18 g Exposure compensation ...............................82 h Aperture...............................................57, 60, 62 i Time code.......................................................177 j Shutter speed .....................................57, 58, 62 k TTL lock ..................................................149, 253 l AE lock...................................................... 87, 226 m Metering ............................................................85 n Shooting mode ...............................................56 o Focus mode 2 ....................................................71 p Focus indicator 2 ..............................................72 q Manual focus indicator 2 .......................71, 79 r AF lock...................................................... 87, 226 s Mic jack setting ............................................175 t AF+MF indicator 2 .......................................131 u Shutter type ...................................................144 v Recording level 2 ...........................................174 w Continuous mode...........................................93 x Exposure indicator..........................................62 y Self-timer indicator .....................................139 z Microphone ......................................................50 0 Remote release ................................................59 1 Flash (TTL) mode .........................................267 2 IS mode 2 .........................................................146 1 Shows “9999” if there is space for over 9999 frames. 2 Not displayed when ON is selected for D SCREEN SET-UP > LARGE INDICATORS MODE(LCD). 13 1 Before You Begin A Crop factor .....................................................138 B Flash compensation ...................................267 C Focus check ............................................ 80, 132 D Depth-of-field preview...........................61, 80 E Location data download status.....239, 278 F Bluetooth ON/OFF.......................................234 G Image transfer status ........................234, 278 H Movie mode ........................................... 48, 154 I Full HD high-speed recording ..................156 J Focus frame ...............................................75, 86 K Recording time available/ Adjusting Display Brightness The brightness and hue of the viewfinder and LCD monitor can be adjusted using the items in the D SCREEN SET-UP menu. Choose EVF BRIGHTNESS or EVF COLOR to adjust viewfinder brightness or hue, LCD BRIGHTNESS or LCD COLOR to do the same for the LCD monitor. 1 Before You Begin Display Rotation When ON is selected for D SCREEN SET-UP > AUTOROTATE DISPLAYS, the indicators in the viewfinder and LCD monitor automatically rotate to match camera orientation. Choosing a Display Mode Use D SCREEN SET-UP > VIEW MODE SETTING to choose from the following display modes. You can choose separate display modes for shooting and playback. SHOOTING Option Description Putting your eye to the viewfinder turns the viewfinder on and the LCD monitor off ; taking your eye away turns E EYE SENSOR the viewfinder off and LCD monitor on. Viewfinder on, LCD monitor off. Q EVF ONLY LCD monitor on, viewfinder off. r LCD ONLY Putting your eye to the viewfinder turns the viewfinder Q EVF ONLY + E on; taking it away turns the viewfinder off. The LCD monitor remains off. Putting your eye to the viewfinder during shooting turns t EYE SENSOR + the viewfinder on, but the LCD monitor is used for the display of images once you remove your eye from the LCD IMAGE DISP. viewfinder after shooting. 14 Camera Displays PLAYBACK Option E EYE SENSOR Q EVF ONLY r LCD ONLY Description Putting your eye to the viewfinder turns the viewfinder on and the LCD monitor off ; taking your eye away turns the viewfinder off and LCD monitor on. Viewfinder on, LCD monitor off. LCD monitor on, viewfinder off. Before You Begin The Eye Sensor The eye sensor may respond to objects other than your eye or to light shining directly on the sensor. 1 Eye sensor 15 The DISP/BACK Button The DISP/BACK button controls the display of indicators in the viewfinder and LCD monitor. N Indicators for the EVF and LCD must be selected separately. To choose the EVF display, place your eye to the viewfinder while using the DISP/BACK button. 1 Before You Begin Viewfinder (EVF) Standard indicators Full screen (no indicators) 5 4 3 2 1 0 -1 -2 -3 -4 -5 1000 12800 LCD Monitor Standard indicators No indicators Info display (still photography only) 16 Camera Displays Customizing the Standard Display To choose the items shown in the standard indicator display: Display standard indicators. Use the DISP/BACK button to display standard indicators. 2 Select DISP. CUSTOM SETTING. Select D SCREEN SET-UP > DISP. CUSTOM SETTING in the setup menu. 3 Choose items. Highlight items and press MENU/OK to select or deselect. Item FRAMING GUIDELINE ELECTRONIC LEVEL FOCUS FRAME AF DISTANCE INDICATOR MF DISTANCE INDICATOR HISTOGRAM LIVE VIEW HIGHLIGHT ALERT SHOOTING MODE APERTURE/S-SPEED/ISO INFORMATION BACKGROUND Expo. Comp. (Digit) Expo. Comp. (Scale) FOCUS MODE PHOTOMETRY SHUTTER TYPE FLASH 4 5 Default R R R R R R R R R R R R R R R R Item CONTINUOUS MODE DUAL IS MODE TOUCH SCREEN MODE WHITE BALANCE FILM SIMULATION DYNAMIC RANGE BOOST MODE FRAMES REMAINING IMAGE SIZE/QUALITY MOVIE MODE & REC. TIME IMAGE TRANSFER ORDER MIC LEVEL GUIDANCE MESSAGE BATTERY LEVEL FRAMING OUTLINE Default R R R R R R R R R R R R R R R Press DISP/BACK to save changes. Press DISP/BACK as needed to exit the menus and return to the shooting display. 17 1 Before You Begin 1 Camera Displays 1 Virtual Horizon Selecting ELECTRONIC LEVEL displays a virtual horizon. The camera is level when the two lines overlap. Note that the virtual horizon may not be displayed if the camera lens is pointed up or down. For a 3D display (shown), press the function button to which ELECTRONIC LEVEL is assigned (P 251). Pitch Roll Before You Begin Framing Outline Enable FRAMING OUTLINE to make the borders of the frame easier to see against dark backgrounds. Histograms Histograms show the distribution of tones in the image. Brightness is shown by the horizontal axis, the number of pixels by the vertical axis. Number of pixels Shadows Highlights Pixel brightness • Optimal exposure: Pixels are distributed in an even curve throughout the tone range. • Overexposed: Pixels are clustered on the right side of the graph. • Underexposed: Pixels are clustered on the left side of the graph. To view separate RGB histograms and a display showing areas of the frame that will be overexposed at current settings superimposed on the view through the lens, press the function button to which HISTOGRAM is assigned (P 251). A Overexposed areas blink B RGB histograms 18 Using the Menus To display the menus, press MENU/OK. IMAGE QUALITY SETTING IMAGE SIZE IMAGE QUALITY RAW RECORDING FILM SIMULATION MONOCHROMATIC COLOR GRAIN EFFECT COLOR CHROME EFFECT COLOR CHROME FX BLUE EXIT Shooting Still photography: Mode dial rotated to position other than F (movie) MOVIE SETTING SHOOTING MODE MOVIE MODE FILE FORMAT FULL HD HIGH SPEED REC FIX MOVIE CROP MAGNIFICATION F-Log RECORDING 4K MOVIE OUTPUT FULL HD MOVIE OUTPUT EXIT Movie recording: Mode dial rotated to F (movie) PLAY BACK MENU RAW CONVERSION ERASE CROP RESIZE PROTECT IMAGE ROTATE RED EYE REMOVAL VOICE MEMO SETTING Playback EXIT During playback 19 1 Before You Begin The Menus Different menus are displayed during still photography, movie recording, and playback. Using the Menus Selecting a Menu Tab To navigate the menus: 1 Press MENU/OK to display the menus. 1 Before You Begin IMAGE QUALITY SETTING IMAGE SIZE IMAGE QUALITY RAW RECORDING FILM SIMULATION MONOCHROMATIC COLOR GRAIN EFFECT COLOR CHROME EFFECT COLOR CHROME FX BLUE EXIT 2 Press the focus stick (focus lever) left to highlight the tab for the current menu. IMAGE QUALITY SETTING IMAGE SIZE IMAGE QUALITY RAW RECORDING FILM SIMULATION MONOCHROMATIC COLOR GRAIN EFFECT COLOR CHROME EFFECT COLOR CHROME FX BLUE EXIT Tab 3 Press the focus stick up or down to highlight the tab containing the desired item. 4 Press the focus stick right to place the cursor in the menu. N Use the front command dial to select menu tabs or page through menus and the rear command dial to highlight menu items. 20 Touch Screen Mode The LCD monitor also functions as a touch screen. TOUCH SCREEN SETTINGS TOUCH SCREEN SETTING DOUBLE TAP SETTING ON TOUCH FUNCTION TOUCH SCREENOFF SETTING EVF TOUCH SCREEN AREA SETTINGS EVF The LCD monitor can be used to select the focus area while pictures are being framed in the electronic viewfinder (EVF). Use D BUTTON/DIAL SETTING > TOUCH SCREEN SETTING > EVF TOUCH SCREEN AREA SETTINGS to choose the area of the monitor employed for touch controls. N When FACE DETECTION ON is selected for G AF/MF SETTING > FACE/EYE DETECTION SETTING, you can choose the face used for focus. 21 1 Before You Begin Shooting Touch Controls To enable touch controls, select ON for D BUTTON/DIAL SETTING > TOUCH SCREEN SETTING > x TOUCH SCREEN SETTING. LCD Monitor The operation performed can be selected by tapping the touch screen mode indicator in the display. Touch controls can be used for the following operations: 1 Mode Description Before You Begin Tap your subject in the display to focus and release the shutter. TOUCH In burst mode, pictures will be taken while you keep your finger SHOOTING on the display. • If SINGLE AF is selected for focus mode, the camera will fo- AF AF OFF cus when you tap your subject in the display. Focus locks at the current distance until you tap the AF OFF icon. • If CONTINUOUS AF is selected for focus mode, the camera will initiate focus when you tap your subject in the display. The camera will continue to adjust focus for changes in the distance to the subject until you tap the AF OFF icon. • When MANUAL FOCUS is selected for focus mode, you can tap the display to focus on the selected subject using autofocus. AREA Tap to select a point for focus or zoom. The focus frame will move to the selected point. OFF Touch controls disabled. O Different touch controls are used during focus zoom (P 136). N • To disable touch controls and hide the touch screen mode indica- tor, select OFF for D BUTTON/DIAL SETTING > TOUCH SCREEN SETTING > x TOUCH SCREEN SETTING. • Touch control settings can be adjusted using G AF/MF SETTING > xF TOUCH SCREEN MODE. For information on the touch controls available during movie recording, see “Movie Recording (xF TOUCH SCREEN MODE; P 171)”. 22 Touch Screen Mode N • Enabling movie-optimized controls disables the aperture ring. • When movie-optimized control is enabled, the movie-optimized mode button can be used to change shooting settings or disable movie-optimized control. 23 1 Before You Begin MOVIE OPTIMIZED CONTROL oL Selecting ON for B MOVIE SETTING > MOVIE OPTIMIZED CONTROL oL or tapping the movie-optimized mode button in the shooting display optimizes the command dials and touch controls for movie recording. This can be used to preMovie-optimized vent camera sounds being recorded with mode button movie footage. • SHUTTER SPEED • WIND FILTER • APERTURE • HEADPHONES VOLUME • EXPOSURE COMPENSATION • F FILM SIMULATION • ISO • F WHITE BALANCE • INTERNAL MIC LEVEL • F IS MODE ADJUSTMENT/EXTERNAL MIC • F IS MODE BOOST LEVEL ADJUSTMENT • F FOCUS MODE 1 Before You Begin Touch Function Functions can be assigned to the following flick gestures in much the same way as function buttons (P 255): • Flick up: T-Fn1 • Flick left: T-Fn2 • Flick right: T-Fn3 • Flick down: T-Fn4 N • In some cases, touch-function flick ges- tures display a menu; tap to select the desired option. • Touch-function gestures are disabled by default. To enable touch-function gestures, select ON for D BUTTON/DIAL SETTING > TOUCH SCREEN SETTING > c TOUCH FUNCTION. 24 INTERNAL MIC LEVEL ADJUSTMENT SET CANCEL Touch Screen Mode Playback Touch Controls When ON is selected for D BUTTON/DIAL SETTING > TOUCH SCREEN SETTING > a TOUCH SCREEN SETTING, touch controls can be used for the following playback operations: • Swipe: Swipe a finger across the display to view other images. 1 Before You Begin • Pinch-out: Place two fingers on the display and spread them apart to zoom in. • Pinch-in: Place two fingers on the display and slide them together to zoom out. N Pictures can be zoomed out until the entire image is visible but no further. • Double-tap: Tap the display twice to zoom in on the focus point. • Drag: View other areas of the image during playback zoom. 25 MEMO 26 First Steps 27 Attaching the Strap Attach the strap. Attach the strap to the two strap clips as shown below. 2 First Steps O To avoid dropping the camera, be sure the strap is correctly secured. 28 Attaching a Lens The camera can be used with lenses for the FUJIFILM X-mount. Remove the body cap from the camera and the rear cap from the lens. Place the lens on mount, keeping the marks on the lens and camera aligned (A), and then rotate the lens until it clicks into place (B). 2 not enter the camera. • Be careful not to touch the camera’s internal parts. • Rotate the lens until it clicks securely into place. • Do not press the lens release button while attaching the lens. Removing Lenses To remove the lens, turn the camera off, then press the lens release button (A) and rotate the lens as shown (B). O To prevent dust accumulating on the lens or inside the camera, replace the lens caps and camera body cap when the lens is not attached. Lenses and Other Optional Accessories The camera can be used with lenses and accessories for the FUJIFILM X-mount. O Observe the following precautions when attaching or removing (exchanging) lenses. • Check that the lenses are free of dust and other foreign matter. • Do not change lenses in direct sunlight or under another bright light source. Light focused into the interior of the camera could cause it to malfunction. • Attach the lens caps before exchanging lenses. 29 First Steps O • When attaching lenses, ensure that dust or other foreign matter does Inserting the Battery and a Memory Card Insert the battery and memory card as described below. 1 Slide the battery-chamber cover latch as shown and open the battery-chamber cover. 2 Insert the battery. Using the battery to keep the battery latch pressed to one side, insert the battery contacts first in the direction shown by the arrow. 3 Insert the memory card. 2 First Steps N The optional SD, SDHC, and SDXC memory cards the camera uses to store pictures are referred to as “memory cards”. 4 30 Close the battery-chamber cover and slide the battery-chamber cover latch closed. Inserting the Battery and a Memory Card Removing the Battery Before removing the battery or memory card, turn the camera off and open the battery-chamber cover. To remove the battery, press the battery latch to the side, and slide the battery out of the camera as shown. ments. Observe caution when removing the battery. Removing Memory Cards To remove the memory card, press it in and release it slowly. The card can then be removed by hand. O • Press the center of the card when ejecting it. • When a memory card is removed, the card could be ejected too quickly. Use your finger to hold it and gently release the card. 31 2 First Steps O The battery may become hot when used in high-temperature environ- Inserting the Battery and a Memory Card 2 Compatible Memory Cards • The camera can be used with SD, SDHC, and SDXC memory cards. • The camera supports UHS-I memory cards. • To record movies, use cards with a UHS speed class of 3 or better or a video speed class of V30 or better. • A list of supported memory cards is available on the Fujifilm website. For details, visit: https://fujifilm-x.com/support/compatibility/cameras/. First Steps O • Do not turn the camera off or remove the memory card while the memo- ry card is being formatted or data are being recorded to or deleted from the card. Failure to observe this precaution could damage the card. • Memory cards can be locked, making it impossible to format the card or to record or delete images. Before inserting a memory card, slide the write-protect switch to the unlocked position. • Memory cards are small and can be swallowed; keep out of reach of children. If a child swallows a memory card, seek medical assistance immediately. • miniSD or microSD adapters that are larger or smaller than memory cards may not eject normally; if the card does not eject, take the camera to an authorized service representative. Do not forcibly remove the card. • Do not affix labels or other objects to memory cards. Peeling labels can cause camera malfunction. • Movie recording may be interrupted with some types of memory card. • Formatting a memory card in the camera creates a folder in which pictures are stored. Do not rename or delete this folder or use a computer or other device to edit, delete, or rename image files. Always use the camera to delete pictures; before editing or renaming files, copy them to a computer and edit or rename the copies, not the originals. Renaming the files on the camera can cause problems during playback. 32 Charging the Battery The battery is not charged at shipment. Charge the battery before use. O • An NP-W126S rechargeable battery is supplied with the camera. • Turn the camera off for charging. • The camera can be charged via USB. USB charging is available with computers with a manufacturer-approved operating system and USB interface. 2 First Steps Leave the computer on during charging. O • The battery will not charge while the camera is on. • Connect the supplied USB cable. • Connect the camera directly to the computer; do not use a USB hub or keyboard. • Charging stops if the computer enters sleep mode. To resume charging, activate the computer and disconnect and reconnect the USB cable. • Charging may not be supported depending on the model of computer, computer settings, and the computer’s current state. • The battery takes about 5 hours to charge with a charging input of 5 V/500 mA. • To charge the battery from a household AC power outlet, use a BC-W126S battery charger (available separately). 33 Charging the Battery Charge Status The indicator lamp shows battery charge status as follows: Indicator lamp On Off Blinks 2 Battery status Battery charging. Charging complete. Charging error. O • Do not affix labels or other objects to the battery. Failure to observe First Steps this precaution could make it impossible to remove the battery from the camera. • Do not short the battery terminals. The battery could overheat. • Read the cautions in “The Battery and Power Supply”. • Use only genuine Fujifilm rechargeable batteries designated for use in this camera. Failure to observe this precaution could result in product malfunction. • Do not remove the labels from the battery or attempt to split or peel the outer casing. • The battery gradually loses its charge when not in use. Charge the battery one or two days before use. • If the battery fails to hold a charge, it has reached the end of its charging life and must be replaced. • Remove dirt from the battery terminals with a clean, dry cloth. Failure to observe this precaution could prevent the battery from charging. • Note that charging times increase at low or high temperatures. N • If the camera is turned on during charging, charging will end and the USB connection will instead be used to power the camera. The battery level will begin to gradually decline (P 238). • The camera will display a “power supply” icon when powered via USB. 34 Turning the Camera On and Off Use the ON/OFF switch to turn the camera on and off. Slide the switch to ON to turn the camera on, or to OFF to turn the camera off. O Fingerprints and other marks on the lens or viewfinder can affect picN • Pressing the a button during shooting starts playback. • Press the shutter button halfway to return to shooting mode. • The camera will turn off automatically if no operations are performed for the length of time selected for D POWER MANAGEMENT > AUTO POWER OFF. To reactivate the camera after it has turned off automatically, press the shutter button halfway or turn the ON/OFF switch to OFF and then back to ON. 35 2 First Steps tures or the view through the viewfinder. Keep the lens and viewfinder clean. Checking the Battery Level After turning the camera on, check the battery level in the display. Battery level is shown as follows: 2 First Steps Indicator e f g h i i (red) j (blinks red) 36 Description Battery partially discharged. Battery about 80% full. Battery about 60% full. Battery about 40% full. Battery about 20% full. Low battery. Charge as soon as possible. Battery exhausted. Turn camera off and recharge battery. Basic Setup When you turn the camera on for the first time, you can choose a language and set the camera clock. At default settings, you can also pair the camera with a smartphone or tablet so that you can later synchronize the clocks or download pictures. Follow the steps below when turning the camera on for the first time. N If you intend to pair the camera with a smartphone or tablet, install 1 Turn the camera on. A language-selection dialog will be displayed. 2 Choose a language. Highlight a language and press MENU/OK. 3 Pair the camera with the smartphone or tablet. Press MENU/OK to pair the camera with a smartphone or tablet running the FUJIFILM Camera Remote app. PAIRING REGISTRATION PAIR WITH SMARTPHONE? N To skip pairing, press DISP/BACK. IMAGES CAN BE EASILY TRANSFERRED TO SMARTPHONE BY PAIRING SCAN QR CODE OR SEARCH FOR "FUJIFILM Camera Remote" APP ON THE WEB SET SKIP HELP 37 2 First Steps and launch the latest version of the FUJIFILM Camera Remote App on the smart device before proceeding. For more information, visit: http://app.fujifilm-dsc.com/en/camera_remote/ 4 Check the time. When pairing is complete, you will be prompted to set the camera clock to the time reported by the smartphone or tablet. Check that the time is correct. PAIRING REGISTRATION PAIRING COMPLETE 12/31/2020 12:10 AM SET DATE/TIME FROM SMARTPHONE? SET N 2 5 CANCEL To set the clock manually, press DISP/BACK (P 39). First Steps Synchronize the camera settings with the settings configured on your smartphone or tablet. SMARTPHONE SYNC. SETTING LOCATION&TIME LOCATION TIME OFF SET N The option selected can be changed at any time using D CONNECTION SETTING > Bluetooth SETTINGS. 6 Set the clock. Press MENU/OK to set the camera clock to the time reported by the smartphone or tablet and exit to shooting mode. 7 Format the memory card (P 206). O Format memory cards before first use, and be sure to reformat all memory cards after using them in a computer or other device. N If the battery is removed for an extended period, the camera clock will be reset and the language-selection dialog will be displayed when the camera is turned on. Skipping the Current Step If you skip a step, a confirmation dialog will be displayed; select NO to avoid repeating any steps you skipped the next time the camera is turned on. 38 Basic Setup Choosing a Different Language To change the language: 1 Display language options. Select D USER SETTING > Qa. 2 Choose a language. Highlight the desired option and press MENU/OK. Changing the Time and Date To set the camera clock: 2 First Steps 1 Display DATE/TIME options. Select D USER SETTING > DATE/TIME. 2 Set the clock. Press the focus stick (focus lever) left or right to highlight the year, month, day, hour, or minute and press up or down to change. Press MENU/OK to set the clock. 39 MEMO 40 Basic Photography and Playback 41 Taking Photographs This section explains basic photography. 1 Rotate the mode dial to AUTO to view the Y shooting display. The camera automatically selects a scene according to the type of subject detected. 3 Basic Photography and Playback O In Y (AUTO) mode, the camera continuously adjusts focus and searches for eyes, increasing the drain on the battery; in addition, the sound of the camera focusing may be audible. 2 Ready the camera. Hold the camera steady with both hands—shaking or unsteady hands can blur your shots. To prevent pictures that are out of focus or too dark (underexposed), keep your fingers and other objects away from the lens and AF-assist illuminator. 42 Taking Photographs 3 Frame the picture. Lenses with Zoom Rings Use the zoom ring to frame the picture in the display. Rotate the ring left to zoom out, right to zoom in. A 4 Focus. Press the shutter button halfway to focus. 3 Focus frame • If the camera is able to focus, it will beep twice and focus frame and focus indicator will glow green. • If the camera is unable to focus, the focus frame will turn red, s will be displayed, and the focus indicator will blink white. N • If the subject is poorly lit, the AF-assist illuminator may light to assist the focus operation. • Focus and exposure will lock when the shutter button is pressed halfway. Focus and exposure remain locked while the button is kept in this position (AF/AE lock). • The camera will focus on subjects at any distance in the macro and standard focus ranges for the lens. 5 Shoot. Smoothly press the shutter button the rest of the way down to take the picture. 43 Basic Photography and Playback Focus indicator Viewing Pictures Pictures can be viewed in the viewfinder or LCD monitor. To view pictures full frame, press a. 100-0001 3 Basic Photography and Playback Press the focus stick (focus lever) left to page through pictures in reverse order. Press it right to page through pictures in the order recorded. Keep the stick pressed to scroll rapidly to the desired frame. N • You can also page through pictures using the front command dial or swipe gestures. • Pictures taken using other cameras are marked with a m (“gift im- age”) icon to warn that they may not display correctly and that playback zoom may not be available. 44 Deleting Pictures Use the b (delete) button to delete pictures. O Deleted pictures cannot be recovered. Protect important pictures or copy them to a computer or other storage device before proceeding. 1 With a picture displayed full frame, press the b button and select FRAME. ERASE FRAME SELECTED FRAMES ALL FRAMES 3 Choose a picture and press MENU/OK to delete it. • The picture will be deleted when the MENU/OK button is pressed; a confirmation dialog is not displayed. Be careful not to accidentally delete pictures you wish to keep. • Additional pictures can be deleted using the MENU/OK button. Display the desired pictures and press MENU/OK to delete them one by one. N • Protected pictures cannot be deleted. Remove protection from any pictures you wish to delete (P 192). • Pictures can also be deleted from the menus using the C PLAY BACK MENU > ERASE option (P 188). 45 Basic Photography and Playback 2 MEMO 46 Movie Recording and Playback 47 Recording Movies Record movies with sound. Recording Movies Movies can be recorded by pressing the t (movie recording) button or rotating the mode dial to F (movie). The t (Movie Recording) Button Use the t (movie recording) button to quickly and easily record movies while in still photography mode. N The camera automatically selects CONTINUOUS AF for focus mode. 4 1 Press t to start recording. Movie Recording and Playback • A recording indicator (V) is dis- played while recording is in progress. • The display shows the elapsed recording time. 2 48 Press t again to end recording. Recording ends automatically when the movie reaches 29 minutes 59 seconds or the memory card is full. Recording Movies F (Movie) Mode For more control over camera settings, rotate the mode dial to F (movie) and record movies using the shutter button. Rotate the mode dial to F (movie). 2 Press the shutter button to start recording. • A recording indicator (V) is displayed while recording is in progress. • The display shows the elapsed recording time. 3 4 Press the shutter button again to end recording. Recording ends automatically when the movie reaches 29 minutes 59 seconds or the memory card is full. Temperature Warnings The camera automatically turns off to protect itself when its temperature or the temperature of the battery rises. If a temperature warning is displayed, image noise may increase. Turn the camera off and wait for it to cool before turning it on again (P 320). 49 Movie Recording and Playback 1 O • Use a memory card with a UHS speed class of 3 or better when recording movies. • Sound is recorded via the built-in microphone or an optional external microphone. Do not cover the microphone during recording. • Note that the microphone may pick up lens noise and other sounds made by the camera during recording. • Vertical or horizontal streaks may appear in movies containing very bright subjects. This is normal and does not indicate a malfunction. N • The indicator lamp lights while recording is in progress. • In the case of zoom lenses, zoom can be adjusted during recording using the zoom ring (if available). • Exposure compensation can be adjusted during recording, but only by a maximum of ±2 EV. • Recording may be unavailable at some settings, while in other cases settings may not apply during recording. 4 • Headphones connected via USB can be used to monitor audio during Movie Recording and Playback movie recording. Use the supplied headphone adapter to convert the USB connector to a plug for a headphone jack. Using an External Microphone Sound can be recorded with external microphones that connect using jacks 3.5 mm in diameter; microphones that require plug-in power cannot be used. See the microphone manual for details. 50 Recording Movies Adjusting Movie Settings Movie settings can be adjusted from the movie menus or using the B MOVIE SETTING item in the photo menus (P 19). • Use the B MOVIE SETTING item in the photo menus to quickly adjust settings when recording movies via the t (movie recording) button (P 151). • The movie menus contain options for use when recording movies via the shutter button in F (movie) mode (P 154). O Changes made using the B MOVIE SETTING item in the photo menus also apply to the movie menus. Changes made in one set of menus automatically apply in the other. Depth of Field To soften backgrounds, set aperture as wide as possible. Aperture can be adjusted directly in modes A (aperture-priority AE) and M (manual). 4 Movie Recording and Playback 51 Viewing Movies View movies on the camera. In full-frame playback, movies are identified by a W icon. Press the focus stick (focus lever) down to start movie playback. PLAY +1.0 12800 The following operations can be performed while a movie is displayed: 4 Movie Recording and Playback Focus stick Full-frame Playback in progress Playback paused (focus lever) playback (x) (y) Up — End playback Down Start playback Pause playback Start/resume playback Left/right View other pictures Adjust speed Single frame rewind/advance Progress is shown in the display during playback. 29m59s STOP PAUSE O • Do not cover the speaker during playback. • Sound is not played back if OFF is selected for D USER SETTING > SOUND & FLASH. N • Press MENU/OK to pause playback and display volume controls. Press the focus stick (focus lever) up or down to adjust the volume; press MENU/OK again to resume playback. Volume can also be adjusted using D SOUND SET-UP > PLAYBACK VOLUME. • Audio can be played back over headphones or other devices connected via USB using the supplied headphone adapter. 52 Viewing Movies Playback Speed Press the focus stick (focus lever) left or right to adjust playback speed during playback. Speed is shown by the number of arrows (M or N). 29m59s Arrows 4 Movie Recording and Playback 53 MEMO 54 Taking Photographs 55 Choosing a Shooting Mode Choose a shooting mode according to the scene or type of subject. Y (AUTO) When the mode dial is rotated to AUTO, the camera automatically optimizes settings to suit the scene. The display shows the icon for the mode most closely matching the type of scene detected by the camera. 5 Taking Photographs C : LANDSCAPE d : NIGHT h : NIGHT (TRIPOD) e : MACRO Q : SUNSET x : SKY y : GREENERY h : PORTRAIT g : BACKLIT PORTRAIT c : MOVING OBJECT a : PORTRAIT&MOTION b : BACKLIT PORTRAIT&MOTION O • The mode selected may vary with shooting conditions. If the mode and subject do not match, select mode P or choose SP and select a scene manually. • The additional processing time required in some scene modes may increase save times. N No icon will be displayed if the camera is unable to determine the type of scene. 56 Choosing a Shooting Mode Program AE (P) Let the camera choose shutter speed and aperture for optimal exposure. Other values that produce the same exposure can be selected with program shift. Rotate the mode dial to P. P will appear in the display. 5 Taking Photographs Program Shift Rotate the front command dial to choose the desired combination of shutter speed and aperture (program shift). Aperture Shutter speed O Program shift is not available in any of the following circumstances: • With flash units that support TTL auto • When a flash mode other than D is selected for F FLASH SETTING > FLASH FUNCTION SETTING • When an auto option is selected for H IMAGE QUALITY SETTING > DYNAMIC RANGE • In movie mode N To cancel program shift, turn the camera off. 57 Shutter-Priority AE (S) Choose a shutter speed and let the camera adjust aperture for optimal exposure. 1 Rotate the mode dial to S. S will appear in the display. 5 Taking Photographs 2 Use the front command dial to choose a shutter speed. O • If the correct exposure cannot be achieved at the selected shutter speed, aperture will be displayed in red. • If the subject is outside the metering range of the camera, the aperture display will show “– – –”. 58 Choosing a Shooting Mode Time (T) Shutter speeds of 1 s or slower are referred to as “long time-exposures”. Use of a tripod is recommended to prevent the camera moving during the exposure. N • A count-down timer will be displayed while the exposure is in progress. • To reduce “noise” (mottling) in long time-exposures, select ON for H IMAGE QUALITY SETTING > LONG EXPOSURE NR. Note that this may increase the time needed to record images after shooting. Using a Remote Release A remote release can be used for long time-exposures. When using an optional RR-100 remote release or an electronic release from third-party suppliers, connect it to the camera’s microphone/remote release connector via a third-party ⌀2.5 mm to 3.5 mm adapter. 5 NA CHECK MIC/REMOTE RELEASE SETTING SET SKIP 59 Taking Photographs confirmation dialog will be displayed when a remote release is connected; press MENU/OK and select n REMOTE for MIC/ REMOTE RELEASE. Aperture-Priority AE (A) Choose an aperture and let the camera adjust shutter speed for optimal exposure. 1 Rotate the mode dial to A. A will appear in the display. 5 Taking Photographs 2 Use the front command dial to choose an aperture. O • If the correct exposure cannot be achieved at the selected aperture, shutter speed will be displayed in red. • If the subject is outside the metering range of the camera, the shutter speed display will show “– – –”. N 60 If the lens is equipped with a aperture ring, aperture can be adjusted by rotating the ring. Choosing a Shooting Mode Previewing Depth of Field When PREVIEW DEPTH OF FIELD is assigned to a function button, pressing the button displays a L icon and stops aperture down to the selected setting, allowing depth of field to be previewed in the display (P 251). 5 Taking Photographs 61 Manual Exposure (M) Alter exposure from that selected by the camera. 1 Rotate the mode dial to M. M will appear in the display. 5 2 Taking Photographs Rotate the rear command dial to choose a shutter speed and the front command dial to choose the aperture. N The manual exposure display includes an exposure indicator that shows the amount the picture would be underor over-exposed at current settings. Shutter speed Aperture N If the lens is equipped with a aperture ring, aperture can be adjusted by rotating the ring. 62 Choosing a Shooting Mode Bulb (B) Choose a shutter speed of BULB for long time-exposures in which you open and close the shutter manually. Use of a tripod is recommended to prevent the camera moving during the exposure. 1 Using the rear command dial, choose a shutter speed of BULB. 2 Press the shutter button all the way down. The shutter will remain open for up to 60 minutes while the shutter button is pressed; the display shows the time elapsed since the exposure started. N To reduce “noise” (mottling) in long time-exposures, select ON for Exposure Preview To preview exposure in the LCD monitor, select PREVIEW EXP./WB for D SCREEN SET-UP > PREVIEW EXP./WB IN MANUAL MODE. N Select an option other than PREVIEW EXP./WB when using the flash or on other occasions on which exposure may change when the picture is taken. 63 5 Taking Photographs H IMAGE QUALITY SETTING > LONG EXPOSURE NR. Note that this may increase the time needed to record images after shooting. SP SCENE POSITION The camera offers a choice of “scenes”, each adapted to particular shooting conditions or a specific type of subject. 1 Rotate the mode dial to SP (SCENE POSITION). 2 Choose a scene via A SHOOTING SETTING > SCENE POSITION. 5 Taking Photographs 64 Choosing a Shooting Mode Choose from the following options: N The scene can also be selected in the shooting display via the front command dial. 65 5 Taking Photographs Scene Description Choose for portraits. h PORTRAIT Z PORTRAIT ENHANCER Processes portraits to give the subject a smooth, natural-looking complexion. Choose for daylight shots of buildings and landM LANDSCAPE scapes. Choose when photographing moving subjects. N SPORT Choose for poorly lit twilight or night scenes. O NIGHT Choose this mode for slow shutter speeds when H NIGHT (TRIPOD) shooting at night. Slow shutter speeds are used to capture the exp FIREWORKS panding burst of light from a firework. Choose this mode to record the vivid colors in sunQ SUNSET rises and sunsets. Choose for crisp, clear shots that capture the brightR SNOW ness of scenes dominated by shining white snow. Choose for crisp, clear shots that capture the s BEACH brightness of sunlit beaches. Reduces the blue cast typically associated with unf UNDERWATER derwater lighting. Capture indoor background lighting under lowU PARTY light conditions. Effective for taking more vivid shots of flowers. V FLOWER Take clear pictures of text or drawings in print. W TEXT FILTER Take photos with filter effects. 1 Rotate the mode dial to FILTER. 2 Choose a filter via A SHOOTING SETTING > FILTER SETTING. Filter G TOY CAMERA H MINIATURE I POP COLOR J HIGH-KEY 5 Taking Photographs Z LOW-KEY K DYNAMIC TONE X SOFT FOCUS Description Choose for a retro toy camera effect. The tops and bottoms of pictures are blurred for a diorama effect. Create high-contrast images with saturated colors. Create bright, low-contrast images. Create uniformly dark tones with few areas of emphasized highlights. Dynamic tone expression is used for a fantasy effect. Create a look that is evenly soft throughout the whole image. u PARTIAL COLOR (RED) v PARTIAL COLOR (ORANGE) Areas of the image that are the selected color w PARTIAL COLOR (YELLOW) are recorded in that color. All other areas of the x PARTIAL COLOR (GREEN) image are recorded in black-and-white. y PARTIAL COLOR (BLUE) z PARTIAL COLOR (PURPLE) O Depending on the subject and camera settings, images may in some cases be grainy or vary in brightness or hue. N The scene can also be selected in the shooting display via the function dial. 66 Choosing a Shooting Mode Custom Modes Rotate the mode dial to any of modes C1 (CUSTOM 1) through C4 (CUSTOM 4) to take pictures using previously-saved shooting menu settings. Settings can be saved or edited using H IMAGE QUALITY SETTING > EDIT/SAVE CUSTOM SETTING. Saving Settings 1 2 Select H IMAGE QUALITY SETTING in the shooting menu, then highlight EDIT/SAVE CUSTOM SETTING and press MENU/OK. Highlight EDIT/CHECK SETTING and press MENU/OK. EDIT/SAVE CUSTOM SETTING SAVE CURRENT SETTINGS EDIT/CHECK SETTING AUTO UPDATE SETTING EDIT CUSTOM NAME RESET 5 1 through 4, select SAVE CURRENT SETTINGS. Previously-saved settings in the selected bank will be overwritten. • To restore default settings for selected banks, choose RESET. • Banks can be renamed using EDIT CUSTOM NAME. • If ENABLE is selected for AUTO UPDATE SETTING, changes to settings in modes C1 through C4 will automatically be saved to the current bank. 3 Highlight a custom settings bank and press MENU/OK to select. EDIT/SAVE CUSTOM SETTING SAVE CURRENT SETTINGS CUSTOM 1 EDIT/CHECK SETTING AUTO UPDATE SETTING EDIT CUSTOM NAME CUSTOM 2 CUSTOM 3 CUSTOM 4 RESET 67 Taking Photographs N • To store current camera settings in any of custom settings banks 4 Highlight an item you wish to store in the custom settings bank and press MENU/OK. Adjust settings for the selected item. CUSTOM 1 SHOOTING MODE SHUTTER SPEED APERTURE EXP. COMPENSATION DRIVE MODE EXIT 5 Press MENU/OK to save changes to the selected item and return to the menu item list. Adjust additional items as desired. 6 Pressing DISP/BACK in the menu item list displays a confirmation dialog. Highlight OK and press MENU/OK to save the settings to the selected bank. 5 Taking Photographs 68 SAVE CUSTOM SETTING CUSTOM 1 SET OK? OK CANCEL BACK Choosing a Shooting Mode The Command and Function Dials The roles of the command and Function dials vary with the mode. Front command dial Rear command dial Film simulation Program shift Shutter speed Exposure compensation Film simulation 5 Aperture Shutter speed Scene position Program shift Exposure compensation Taking Photographs AUTO (AUTO) P (PROGRAM AE) S (SHUTTER PRIORITY AE) A (APERTURE PRIORITY AE) M (MANUAL) SP (SCENE POSITION) FILTER (FILTER) C1/C2/C3/C4 (CUSTOM) F (MOVIE) Fn (function) dial Filter selection Varies with exposure mode N The role performed by the function dial can be chosen using D BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING (P 223). 69 Autofocus Take pictures using autofocus. 1 Use G AF/MF SETTING > FOCUS MODE to choose a focus mode (P 71). 2 Use G AF/MF SETTING > AF MODE to choose an AF mode (P 73). 3 Select G AF/MF SETTING > FOCUS AREA and choose the position and size of the focus frame (P 75). 4 Take pictures. 5 Taking Photographs 70 Autofocus Focus Mode Choose how the camera focuses. 1 2 Press MENU/OK to display the menus. 3 Choose from the following options: Select G AF/MF SETTING > FOCUS MODE in the shooting menu. Mode Description Focus manually using the lens focus ring. Choose for manp ual control of focus or in situations in which the camera is MANUAL FOCUS unable to focus using autofocus (P 79). Focus is continually adjusted to reflect changes in the disk tance to the subject while the shutter button is pressed CONTINUOUS AF halfway. Use for subjects that are in motion. l SINGLE AF Focus locks while the shutter button is pressed halfway. Choose for stationary subjects. the lens is in manual focus mode. • If ON is selected for G AF/MF SETTING > PRE-AF, focus will be ad- justed continuously in modes l and k even when the shutter button is not pressed. 71 Taking Photographs N • Regardless of the option selected, manual focus will be used when 5 The Focus Indicator Focus status is shown by the focus indicator. Focus indicator Focus status ( ) Camera focusing. Subject in focus; focus locked (focus z (lights green) mode l). Subject in focus (focus mode k). (z) (lights green) Focus is automatically adjusted for Focus indicator changes in distance to subject. A (blinks white) Camera unable to focus. j Manual focus (focus mode p). 5 Taking Photographs 72 Autofocus Autofocus Options (AF Mode) Choose how the camera focuses in modes l and k. 1 2 3 Press MENU/OK and go to the shooting menu. Select G AF/MF SETTING > AF MODE. Choose an AF mode. How the camera focuses depends on the focus mode. Focus Mode l (SINGLE AF) Option Description Sample image Camera focuses on subject in selected focus point. Use for pinSINGLE POINT point focus on selected subject. r z WIDE j ALL Taking Photographs y ZONE 5 Camera focuses on subject in selected focus zone. Focus zones include multiple focus points, making it easier to focus on subjects in motion. Camera focuses automatically on high-contrast subjects; display shows areas in focus. Rotate the rear command dial in the focus-point selection display (P 76, 77) to cycle through AF modes in the following order: r SINGLE POINT, y ZONE, and z WIDE. 73 Focus Mode k (CONTINUOUS AF) Option Description Sample image Focus tracks subject at selected focus point. Use for subjects moving SINGLE POINT toward or away from camera. r y ZONE z TRACKING 5 Taking Photographs j ALL 74 Focus tracks subject in selected focus zone. Use for subjects that are moving fairly predictably. Focus tracks subjects moving through wide area of frame. Rotate the rear command dial in the focus-point selection display (P 76, 77) to cycle through AF modes in the following order: r SINGLE POINT, y ZONE, and z TRACKING. Autofocus Focus-Point Selection Choose a focus point for autofocus. Viewing the Focus-Point Display 1 Press MENU/OK and go to the shooting menu. 2 Select G AF/MF SETTING > FOCUS AREA to view the focus-point display. 3 Use the focus stick (focus lever) and rear command dial to choose a focus area. N The focus point can also be selected using touch controls (P 21). 5 Taking Photographs 75 Selecting a Focus Point Use the focus stick (focus lever) to choose the focus point and the rear command dial to choose the size of the focus frame. The procedure varies with the option selected for AF mode. Rear command dial Focus stick DISP/BACK button AF mode Tilt r 5 y Rotate Choose from 6 Highlight focus Select highlighted frame sizes point focus point Choose from 3 frame sizes Taking Photographs z N • Manual Press Select center focus point — focus-point selection is not available when z WIDE/ TRACKING is selected in focus mode l. • If j ALL is selected for AF mode, you can rotate the rear command dial in the focus-point selection display to cycle through AF modes in the following order: r SINGLE POINT (6 frame sizes), y ZONE (3 frame sizes), and either z WIDE (focus mode l) or z TRACKING (focus mode k). 76 Autofocus The Focus-Point Display The focus-point display varies with the option selected for AF mode. N Focus frames are shown by small squares (), focus zones by the large squares. r SINGLE POINT AF mode y ZONE z WIDE/TRACKING 77 5 Taking Photographs Number of points avail- Choose from zones with Position focus frame over able can be selected using 7 × 7, 5 × 5, or 3 × 3 focus subject you want to track. G AF/MF SETTING > points. NUMBER OF FOCUS POINTS. Autofocus Autofocus Although the camera boasts a high-precision autofocus system, it may be unable to focus on the subjects listed below. • Very shiny subjects such as mirrors or car bodies. • Subjects photographed through a window or other reflective object. • Dark subjects and subjects that absorb rather than reflect light, such as hair or fur. • Insubstantial subjects, such as smoke or flame. • Subjects that show little contrast with the background. • Subjects positioned in front of or behind a high-contrast object that is also in the focus frame (for example, a subject photographed against a backdrop of highly contrasting elements). Checking Focus To zoom in on the current focus area for precise focus, press the center of the focus stick (focus lever). Press again to zoom in further and a third time to cancel zoom. 5 Taking Photographs 㹋 Normal display Focus zoom N • In focus mode l, zoom can be adjusted by rotating the rear command dial. • In focus mode l, select SINGLE POINT for AF MODE. • Focus zoom is not available in focus mode k or when G AF/MF SETTING > PRE-AF is on. D BUTTON/DIAL SETTING > FOCUS LEVER SETTING to change the function performed by the center of the focus stick (focus lever). D BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING can also be used to assign focus zoom to other controls (P 251). • Use 78 Manual Focus Adjust focus manually. 1 Select MANUAL FOCUS for G AF/MF SETTING > FOCUS MODE. 2 Focus manually using the lens focus ring. Rotate the ring left to reduce the focus distance, right to increase. A 3 Take pictures. N • Use D BUTTON/DIAL SETTING > FOCUS RING to reverse the directhe lens is in manual focus mode. 79 Taking Photographs tion of rotation of the focus ring. • Regardless of the option selected, manual focus will be used when 5 Checking Focus A variety of options are available for checking focus in manual focus mode. The Manual Focus Indicator The white line indicates the distance to the subject in the focus area (in meters or feet according to the option selected for D SCREEN SET-UP > FOCUS SCALE UNITS in the setup menu), the blue bar the depth of field, or in other words the distance in front of and behind the subject that appears to be in focus. Focus distance (white line) Depth of field 5 Taking Photographs N If both AF DISTANCE INDICATOR and MF DISTANCE INDICATOR are se- lected in the D SCREEN SET-UP > DISP. CUSTOM SETTING list, the manual focus indicator can also be viewed using the depth-of-field indicator in the standard display. Use the DISP/BACK button to display standard indicators. Focus Zoom If ON is selected for G AF/MF SETTING > FOCUS CHECK, the camera will automatically zoom in on the selected focus area when the focus ring is rotated (P 75). Zoom can be adjusted by rotating the rear command dial. Press the center of the focus stick (focus lever) to exit zoom. N The focus stick can be used to choose the focus area while focus zoom is in effect. 80 Manual Focus MF Assist Use G AF/MF SETTING > MF ASSIST to choose a focus check option. The following options are available: • DIGITAL SPLIT IMAGE: Displays a split image in the center of the frame. Frame the subject in the split-image area and rotate the focus ring until the four parts of the split image are correctly aligned. • DIGITAL MICROPRISM: A grid pattern that emphasizes blur is displayed when the subject is out of focus, disappearing to be replaced by a sharp image when the subject is in focus. • FOCUS PEAK HIGHLIGHT: Highlights high-con- trast outlines. Rotate the focus ring until the subject is highlighted. 5 Taking Photographs 81 Exposure Compensation Adjust exposure. Rotate the rear command dial to adjust exposure. O • The amount of compensation available varies with the shooting mode. • Exposure compensation can be previewed in the shooting display, although the display may not accurately reflect its effects if: - the exposure compensation amount exceeds ±3 EV, - W 200% or X 400% is selected for DYNAMIC RANGE, or - STRONG or WEAK is selected for D RANGE PRIORITY. Exposure compensation can still be previewed in the viewfinder or LCD monitor by pressing the shutter button halfway. In movie mode, the display may not accurately reflect the effects of exposure compensation during F-log recording or when W 200% or X 400% is selected for DYNAMIC RANGE. An accurate preview can be obtained by selecting mode M and adjusting exposure directly. 5 Taking Photographs 82 Sensitivity Adjust the camera’s sensitivity to light. To view sensitivity settings, press the ISO button. Description Sensitivity is automatically adjusted in response to shooting conditions. Adjust sensitivity manually. Selected value is shown in display. Choose for special situations. Note that mottling may appear in pictures taken at H, while L reduces dynamic range. N • Sensitivity is not reset when the camera is turned off. • Pressing the ISO button in F (movie) mode displays the B MOVIE SETTING > F ISO item in the movie menus. Adjusting Sensitivity High values can be used to reduce blur when lighting is poor, while lower values allow slower shutter speeds or wider apertures in bright light; note, however, that mottling may appear in pictures taken at high sensitivities. 83 5 Taking Photographs Option AUTO1 AUTO2 AUTO3 160–12800 L (80) L (100) L (125) H (25600) H (51200) Sensitivity Auto Sensitivity (A) Choose the base sensitivity, maximum sensitivity, and minimum shutter speed for AUTO1, AUTO2, and AUTO3. Item DEFAULT SENSITIVITY MAX. SENSITIVITY MIN. SHUTTER SPEED Options 160–12800 400–12800 ⁄–¼ SEC, AUTO AUTO1 800 Default AUTO2 160 3200 AUTO AUTO3 12800 The camera automatically chooses a sensitivity between the default and maximum values; sensitivity is only raised above the default value if the shutter speed required for optimal exposure would be slower than the value selected for MIN. SHUTTER SPEED. N • If the value selected for DEFAULT SENSITIVITY is higher than that selected for MAX. SENSITIVITY, DEFAULT SENSITIVITY will be set to the value selected for MAX. SENSITIVITY. • The camera may select shutter speeds slower than MIN. SHUTTER SPEED if pictures would still be underexposed at the value selected for MAX. SENSITIVITY. • If AUTO is selected for MIN. SHUTTER SPEED, the camera will automatically choose a minimum shutter speed approximately equal to the inverse of the lens’ focal length, in seconds (for example, if the lens has a focal length of 50 mm, the camera will choose a minimum shutter speed in the neighborhood of 1⁄50 s). The minimum shutter speed is not affected by the option selected for image stabilization. 5 Taking Photographs 84 Metering Choose how the camera meters exposure. A SHOOTING SETTING > PHOTOMETRY offers a choice of the following metering options: O The selected option will only take effect when G AF/MF SETTING > FACE/EYE DETECTION SETTING is OFF. Mode o MULTI p CENTER WEIGHTED v w AVERAGE The camera meters the entire frame but assigns the greatest weight to the area at the center. The camera meters lighting conditions in an area equivalent to 2% of the frame. Recommended with backlit subjects and in other cases in which the background is much brighter or darker than the main subject. Exposure is set to the average for the entire frame. Provides consistent exposure across multiple shots with the same lighting, and is particularly effective for landscapes and portraits of subjects dressed in black or white. N To meter the subject in the selected focus area, choose ON for G AF/ MF SETTING > INTERLOCK SPOT AE & FOCUS AREA (P 133). 85 5 Taking Photographs SPOT Description The camera instantly determines exposure based on an analysis of composition, color, and brightness distribution. Recommended in most situations. Focus/Exposure Lock Focus and exposure lock when the shutter button is pressed halfway. 1 Position the subject in the focus frame and press the shutter button halfway to lock focus and exposure. Focus and exposure will remain locked while the shutter button is pressed halfway (AF/AE lock). 2 Press the button all the way down. N Focus and exposure lock via the shutter button is only available when ON is selected for D BUTTON/DIAL SETTING > SHUTTER AF, SHUTTER AE. 5 Taking Photographs 86 Focus/Exposure Lock Other Controls Focus and exposure can also be locked using function buttons. At default settings, you can use the AEL button to lock exposure without locking focus. If the AFON button is assigned AF LOCK ONLY (P 251), it can similarly be used to lock focus without locking exposure. AEL button (exposure lock) • While the assigned control is pressed, pressing the shutter button halfway will not end the lock. • If AE&AF ON/OFF SWITCH is selected for D BUTTON/DIAL SETTING > AE/ AF-LOCK MODE, the lock can only be ended by pressing the control a second time. AFON button 5 during exposure lock. • Function buttons can be assigned other roles using D BUTTON/ DIAL SETTING > FUNCTION (Fn) SETTING. Exposure and focus lock can also be assigned to other function buttons (P 251). 87 Taking Photographs N • The focus lever (focus stick) can be used to reposition the focus point Bracketing Automatically vary settings over a series of pictures. 1 Press the I (drive) button to display drive-mode menu. 2 Press the focus stick (focus lever) up or down to highlight one of the following: Option W ISO BKT V WHITE BALANCE BKT 5 P 89 89 Option s Bracketing P 90 Taking Photographs 3 Press the focus stick left or right to highlight the desired bracketing settings. 4 5 Press MENU/OK to select. 88 Take pictures. Bracketing W ISO BKT Select a bracketing amount (±1⁄3, ±2⁄3, or ±1) in the drive mode display. Each time the shutter is released, the camera will take a picture at the current sensitivity and process it to create two additional copies, one with sensitivity raised and the other with sensitivity lowered by the selected amount. V WHITE BALANCE BKT Select a bracketing amount (±1, ±2, or ±3) in the drive mode display. Each time the shutter is released, the camera takes one shot and processes it to create three copies: one at the current white balanced setting, one with fine-tuning increased by the selected amount, and another with fine-tuning decreased by the selected amount. 5 Taking Photographs 89 s Bracketing O AE BKT Use A SHOOTING SETTING > AE BKT SETTING to choose the bracketing amount, bracketing order, and number of shots. The camera will take the specified number of shots in sequence: one using the metered value for exposure and the others over- or under-exposed by multiples of the selected bracketing amount. N Regardless of the bracketing amount, exposure will not exceed the limits of the exposure metering system. X FILM SIMULATION BKT Each time the shutter is released, the camera takes one shot and processes it to create copies with different film simulation settings, chosen using A SHOOTING SETTING > FILM SIMULATION BKT. 5 Taking Photographs Y DYNAMIC RANGE BKT Each time the shutter button is pressed, the camera takes three shots with different dynamic ranges: 100% for the first, 200% for the second, and 400% for the third. N While dynamic range bracketing is in effect, sensitivity will be restrict- ed to a minimum of ISO 640; the sensitivity previously in effect is restored when bracketing ends. 90 Bracketing Z FOCUS BKT Each time the shutter button is pressed, the camera takes a series of photos, varying focus with each shot. The A SHOOTING SETTING > FOCUS BKT SETTING item offers a choice of MANUAL and AUTO bracketing. N • Do not adjust zoom during shooting. • Use of a tripod is recommended. MANUAL In MANUAL mode, you choose the following. Option FRAMES STEP INTERVAL Description Choose the number of shots. Choose the amount focus changes with each shot. Choose the interval between shots. : Frames 1 2 Step 3 4 5 Starting focus position • Focus proceeds from the starting position toward infinity. • Small STEP values translate to small changes in focus, larger values to larger changes. • Regardless of the option chosen for FRAMES, shooting ends when focus reaches infinity. 91 5 Taking Photographs Focus and FRAMES/STEP The relation between focus and the options chosen for FRAMES and STEP is shown in the illustration. Bracketing AUTO In AUTO mode, the camera calculates FRAMES and STEP automatically. 1 Select A SHOOTING SETTING in the shooting menu, highlight FOCUS BKT SETTING, and press MENU/OK. 2 Select AUTO and choose an INTERVAL. The view through the lens will be displayed. 3 Focus on the nearest end of the subject and press MENU/OK. The selected focus distance appears as A on the focus distance indicator. FOCUS BKT SETTING SET POINT A CONTROL THE FOCUS RING SET POINT B SET N The same focus range can be chosen by focusing on the farthest end of the subject first. 5 Taking Photographs 4 Focus on the farthest end of the subject and press DISP/BACK. The selected focus distance (B) and focus range (A to B) appear on the focus distance indicator. FOCUS BKT SETTING SET POINT B CONTROL THE FOCUS RING SET POINT A SET N Instead of pressing the DISP/BACK button, you can press MENU/OK and select A again. 5 92 Take photographs. The camera will calculate values for FRAMES and STEP automatically. The number of frames will appear in the display. NO Continuous Shooting (Burst Mode) Capture motion in a series of pictures. 1 Press the I (drive) button to display drive-mode menu and select CH HIGH SPEED BURST or CL LOW SPEED BURST. 2 Choose the frame advance rate and press the shutter button to start shooting. Shooting ends when the shutter button is released or the memory card is full. O • Frame advance rates of 10 fps or faster are available only when Exposure To vary exposure with each shot, select OFF for D BUTTON/DIAL SETTING > SHUTTER AE. N Depending on such factors as aperture, sensitivity, and exposure compensation, exposure may not be adjusted automatically. 93 5 Taking Photographs s ELECTRONIC SHUTTER is selected for A SHOOTING SETTING > SHUTTER TYPE. • If file numbering reaches 9999 before shooting is complete, the remaining pictures will be recorded to a new folder. • Shooting ends when the memory card is full; the camera will record all photos shot to that point. Burst shooting may not begin if the space available on the memory card is insufficient. • Frame rates may slow as more shots are taken. • Frame rate varies with the scene, shutter speed, sensitivity, and focus mode. • Depending on shooting conditions, frame rates may slow or the flash may not fire. • Recording times may increase during burst shooting. HDR Each time the shutter button is pressed, the camera takes three shots, varying exposure each time, and combines them into a single picture. The resulting photograph preserves details in highlights and shadows. 1 Press the I (drive) button and select HDR in the drive-mode menu. 2 Choose the amount the brightnesses of the exposures vary. Option HDR AUTO 5 Taking Photographs HDR200 HDR400 HDR800 HDR800+ 3 94 Description Dynamic range is automatically set to a value of from 200% to 800%. Dynamic range is set to 200%. Dynamic range is set to 400%. Dynamic range is set to 800%. Camera settings are adjusted for maximum variation in dynamic range. Take photographs. The camera will create a combined image. HDR O • Keep the camera steady. • The desired results may not be achieved in the subject moves or the composition or lighting changes during shooting. • The picture will be cropped a very small amount and the resolution will drop slightly. • Mottling may appear in pictures taken at higher values. Choose a value according to the scene. • “Extended” sensitivity values are not supported. • Depending on the options selected for HDR and sensitivity, pictures may not be taken at the selected shutter speed. • The flash does not fire. N HDR images are indicated by a t icon during playback. 5 Taking Photographs 95 Panoramas Follow an on-screen guide to create a panorama. 1 Press the I (drive) button and select PANORAMA in the drive-mode menu. 2 To select the size of the angle through which you will pan the camera while shooting, press the focus stick (focus lever) left. Highlight a size and press MENU/OK. 3 Press the focus stick right to view a choice of pan directions. Highlight a pan direction and press MENU/OK. 4 Press the shutter button all the way down to start recording. There is no need to keep the shutter button pressed during recording. 5 Pan the camera in the direction shown by the arrow. Shooting ends automatically when the camera is panned to the end of the guides and the panorama is complete. 5 Taking Photographs 96 Sweep camera along yellow line in direction of ANGLE DIRECTION Panoramas For Best Results • Move the camera slowly in a small circle at a steady speed • Keep the camera parallel or at right angles to the horizon and be sure to pan only in the direction shown by the guides • Try panning at a different speed if the desired results are not achieved • Prop your elbows against your sides • Use a tripod • For best results, use a lens with a focal length of 35 mm or less (50 mm or less in 35 mm format). O • If the shutter button is pressed all the way down before the panorama is complete, shooting will end and no panorama may be recorded. • The last part of the panorama may not be recorded if shooting ends before the panorama is complete. • Panoramas are created from multiple frames, and the camera may in some cases be unable to stitch the frames together perfectly. • Panoramas may be blurred if the subject is poorly lit. • Shooting may be interrupted if the camera is panned too quickly or 97 5 Taking Photographs too slowly. Panning the camera in a direction other than that shown cancels shooting. • The camera may in some cases record a greater or lesser angle than selected. • The desired results may not be achieved with: - Moving subjects - Subjects close to the camera - Unvarying subjects such as the sky or a field of grass - Subjects that are in constant motion, such as waves and waterfalls - Subjects that undergo marked changes in brightness • If ON is selected for D BUTTON/DIAL SETTING > SHUTTER AE, exposure for the entire panorama is determined by the first frame. Panoramas Viewing Panoramas With the panorama displayed full frame, press the focus stick (focus lever) down to start panorama playback. Vertical panoramas will scroll vertically, horizontal panoramas horizontally. PLAY STOP PAUSE • In full-frame playback, you can use the rear command dial to zoom panoramas in or out. • Panorama playback is controlled using the focus stick. 5 Taking Photographs 98 Focus stick (focus lever) Up Down Full-frame playback — Start playback Left/right View other pictures Panorama Panorama playback playback paused End playback Pause playback Resume playback Choose pan Scroll panorama direction manually Multiple Exposures Create a photograph that combines multiple exposures. 1 Press the I (drive) button and select MULTIPLE EXPOSURE in the drivemode menu. 2 Choose a blend mode. Option AVERAGE BRIGHT DARK 3 Take the first shot. 99 5 Taking Photographs ADDITIVE Description The camera adds the exposures together. You may need to lower exposure compensation depending on the number of shots. The camera automatically optimizes exposure for the final picture. The background in series shot without changing the composition will be optimally exposed. The camera compares the exposures and chooses only the brightest pixel at each location. Colors may be mixed depending on their brightness and hue. The camera compares the exposures and chooses only the darkest pixel at each location. Colors may be mixed depending on their brightness and hue. Multiple Exposures 4 Press MENU/OK. The first shot will be shown superimposed on the view through the lens and you will be prompted to take the second shot. NEXT RETRY EXIT N • To return to the previous step and retake the first shot, press the focus stick (focus lever) left. • To save the first shot and exit without creating a multiple exposure, press DISP/BACK. 5 Take the second shot, using the first frame as a guide. EXIT 5 6 Taking Photographs Press MENU/OK. The combined exposures will be displayed as a guide to composing the next shot. RETRY EXIT N • To return to the previous step and retake the second shot, press the focus stick left. • To end shooting and create a multiple exposure from the shots taken to this point, press DISP/BACK. 7 Make additional exposures. Each photograph can contain up to nine exposures. 8 Press DISP/BACK to end shooting. The camera will create the combined image and multiple exposure shooting will end. 100 Flash Photography Use the built-in flash for additional lighting when shooting at night or indoors under low light. Slide the N lever as shown to raise the flash. 2 Select FLASH FUNCTION SETTING in the F FLASH SETTING menu. The camera will display options for the built-in flash. FLASH SETTING FLASH FUNCTION SETTING RED EYE REMOVAL TTL-LOCK MODE LED LIGHT SETTING COMMANDER SETTING CH SETTING 5 EXIT O Sync terminal options will be displayed if the built-in flash is lowered and either no flash unit, or an incompatible flash unit, is mounted on the hot shoe (P 266). Raise the flash before adjusting settings. 101 Taking Photographs 1 3 Highlight items using the focus stick (focus lever) and rotate the rear command dial to change the highlighted setting (P 103). MODE Built-In Flash ADJUST 4 END Press DISP/BACK to put the changes into effect. O • Depending on the distance to the subject, some lenses may cast shadows in photos taken with the flash. • Be careful not to injure yourself on the edges of the raised flash. • The flash will not fire at some settings, for example in panorama mode or when the electronic shutter is used. • Choose shutter speeds slower than 1⁄180 s when using the flash in exposure mode S (shutter-priority AE) or manual (M). N • In TTL mode, the flash may fire several times with each shot. Do not move the camera until shooting is complete. 5 • The flash will not fire if OFF is selected for SOUND & FLASH in the D USER SETTING menu. Taking Photographs 102 Flash Photography Flash Settings The following settings are available with the built-in flash. MODE Built-In Flash ADJUST END Setting 103 5 Taking Photographs Description Choose from the following options: • TTL: TTL mode. Adjust flash compensation (B) and choose a flash mode (C). • M: The flash fires at the selected output (B) regardless of subject brightness or camera settings. Output is expressed in fractions of full power, from ⁄ to ⁄. The desired results A Flash control mode may not be achieved at low values if they exceed the limits of the flash control system; take a test shot and check the results. • C (primary flash): Choose if the flash is being used as a primary flash controlling secondly flash units, for example as part of a studio flash system. • D (OFF): The flash does not fire. B Flash compensation/ Adjust flash level. The options available vary with the flash control mode (A). output Flash Photography Setting C Flash mode (TTL) 5 D Sync Description Choose a flash mode for TTL flash control. The options available vary with the shooting mode (P, S, A, or M) selected. • E (FLASH AUTO): The flash fires only as required; flash level is adjusted according to subject brightness. A p icon displayed when the shutter button is pressed halfway indicates that the flash will fire when the photo is taken. • F (STANDARD): The flash fires with every shot if possible; flash level is adjusted according to subject brightness. The flash will not fire if not fully charged when the shutter is released. • G (SLOW SYNC.): Combine the flash with slow shutter speeds when photographing portrait subjects against a backdrop of night scenery. The flash will not fire if not fully charged when the shutter is released. Choose whether the flash is timed to fire immediately after the shutter opens (H/1ST CURTAIN) or immediately before it closes (I/2ND CURTAIN). 1ST CURTAIN is recommended in most circumstances. Taking Photographs Red-Eye Removal Red-eye removal is available when an option other than OFF is selected for F FLASH SETTING > RED EYE REMOVAL and G AF/MF SETTING > FACE/EYE DETECTION SETTING is FACE DETECTION ON. Red-eye removal minimizes “red-eye” caused when light from the flash is reflected from the subject’s retinas. Flash Sync Speed The flash will synchronize with the shutter at shutter speeds of 1⁄180 s or slower. Optional Flash Units from Fujifilm The camera can be used with optional Fujifilm shoe-mounted flash units. Third-Party Flash Units Do not use third-party flash units that apply over 300 V to the camera hot shoe. 104 The Shooting Menus 105 IMAGE QUALITY SETTING (Still Photography) Adjust image quality settings for still photography. To display image quality settings, press MENU/OK in the photo shooting display and select the H (IMAGE QUALITY SETTING) tab. IMAGE QUALITY SETTING IMAGE SIZE IMAGE QUALITY RAW RECORDING FILM SIMULATION MONOCHROMATIC COLOR GRAIN EFFECT COLOR CHROME EFFECT COLOR CHROME FX BLUE EXIT N The options available vary with the shooting mode selected. IMAGE SIZE Choose the size and aspect ratio at which still pictures are recorded. 6 The Shooting Menus Option O3:2 O 16 : 9 Image size 6240 × 4160 6240 × 3512 Option O1:1 Image size 4160 × 4160 Option P3:2 P 16 : 9 Image size 4416 × 2944 4416 × 2488 Option P1:1 Image size 2944 × 2944 Option Q3:2 Q 16 : 9 Image size 3120 × 2080 3120 × 1760 Option Q1:1 Image size 2080 × 2080 The following options are available in SPORTS FINDER MODE and when 1.25X CROP is selected in burst mode: Option P3:2 P 16 : 9 Image size 4992 × 3328 4992 × 2808 Option P1:1 Image size 3328 × 3328 N IMAGE SIZE is not reset when the camera is turned off or another shooting mode is selected. 106 IMAGE QUALITY SETTING (Still Photography) IMAGE QUALITY Choose a file format and compression ratio. Option FINE Description Low compression ratios are used for higher-quality images. Higher compression ratios are used to increase the number of NORMAL images that can be stored. Record both RAW and fine-quality JPEG images. FINE + RAW NORMAL + RAW Record both RAW and normal-quality JPEG images. Record RAW images only. RAW The Function Buttons To toggle RAW image quality on or off for a single shot, assign RAW to a function button (P 251). Press the button once to select the option in the right column, again to return to the original setting (left column). Option selected by pressing function button to which RAW is assigned FINE + RAW NORMAL + RAW FINE NORMAL FINE 107 6 The Shooting Menus Option currently selected for IMAGE QUALITY FINE NORMAL FINE + RAW NORMAL + RAW RAW RAW RECORDING Choose whether to compress RAW images. Option UNCOMPRESSED Description RAW images are not compressed. RAW images are compressed using a reversible algorithm that reduces file size with no loss of image data. The images can be viewed in Capture One Express Fujifilm (P 294), RAW FILE CONVERTER EX powered by LOSSLESS COMPRESSED SILKYPIX (P 294), FUJIFILM X RAW STUDIO (P 295), or other software that supports “lossless” RAW compression. Quality is the same as UNCOMPRESSED, but the resulting files are anywhere from about 30 to 90 percent of their uncompressed size. RAW images are compressed using a “lossy”, non-reversible algorithm. Quality is about the same as UNCOMPRESSED, COMPRESSED but the resulting files are anywhere from about 25 to 35 percent of their uncompressed size. 6 The Shooting Menus FILM SIMULATION Simulate the effects of different kinds of film, including blackand-white (with or without color filters). Choose a palette according to your subject and creative intent. Option a AUTO Description The camera chooses the film simulation. This option is available when the mode dial is rotated to AUTO or SP. c PROVIA/STANDARD Ideal for a wide range of subjects. d Velvia/VIVID Vibrant reproduction, ideal for landscape and nature. e ASTIA/SOFT Softer color and contrast for a more subdued look. i CLASSIC CHROME Soft color and enhanced shadow contrast for a calm look. 108 IMAGE QUALITY SETTING (Still Photography) Option Description Ideal for portrait with slightly enhanced contrast. h PRO Neg. Std Ideal for portrait with soft gradations and skin tones. g CLASSIC Neg. Enhanced color with hard tonality to increase image depth. Soft color and rich shadow tone suitable for film look movie. Unique color with low saturation and high contrast. Suitable for still and movie. Shoot in Black and White In rich details with sharpness. Available with yellow (Ye), red (R), and green (G) filters, which deepen shades of gray corresponding to hues complementary to the selected color. • d ACROS+Ye FILTER: Slightly enhances contrast and darkens skies. • c ACROS+R FILTER: Enhances contrast and darkens skies considerably. • b ACROS+G FILTER: Produces pleasing skin tones in portrait. Shoots in black and white. Available with yellow (Ye), red (R), and green (G) filters, which deepen shades of gray corresponding to hues complementary to the selected color. • e MONOCHROME+Ye FILTER: Slightly enhances contrast and darkens skies. • d MONOCHROME+R FILTER: Enhances contrast and darkens skies considerably. • f MONOCHROME+G FILTER: Produces pleasing skin tones in portrait. Shoots in sepia tone. X ETERNA/CINEMA N ETERNA BLEACH BYPASS a ACROS b MONOCHROME f SEPIA N • Film simulation options can be combined with tone and sharpness settings. • Film simulation settings can also be accessed via shortcuts (P 242). • For more information, visit: https://fujifilm-x.com/global/tag/the-world-of-film-simulation/?post_type=xstories 109 6 The Shooting Menus g PRO Neg. Hi MONOCHROMATIC COLOR Add a reddish or bluish tinge (warm or cool color cast) to the a ACROS and b MONOCHROME monochrome film simulations. Color can be adjusted on the WARM–COOL and G (Green)–M (Magenta) axes. MONOCHROMATIC COLOR SET GRAIN EFFECT Add a film grain effect. ROUGHNESS Option STRONG WEAK OFF Description Choose for rougher grains. Choose for smoother grains. Turn the effect off. SIZE 6 The Shooting Menus Option LARGE SMALL Description Choose for coarser grains. Choose for finer grains. COLOR CHROME EFFECT Increase the range of tones available for rendering colors that tend to be highly saturated, such as reds, yellows, and greens. Option STRONG WEAK OFF 110 Description Choose for a strong effect. Choose for a weak effect. Turn the effect off. IMAGE QUALITY SETTING (Still Photography) COLOR CHROME FX BLUE Increase the range of tones available for rendering blues. Option STRONG WEAK OFF Description Choose for a strong effect. Choose for a weak effect. Turn the effect off. WHITE BALANCE For natural colors, choose a white balance option that matches the light source. Description White balance is adjusted automatically. Choose for whiter whites in scenes lit by incandescent bulbs. White balance is adjusted automatically. White balance is adjusted automatically. Choose for warmer whites in scenes lit by incandescent bulbs. Measure a value for white balance. 6 Choose a color temperature. The Shooting Menus Option WA WHITE PRIORITY AUTO AA AMBIENCE PRIORITY k CUSTOM 1 l CUSTOM 2 m CUSTOM 3 k COLOR TEMPERATURE i DAYLIGHT j SHADE k FLUORESCENT LIGHT-1 l FLUORESCENT LIGHT-2 m FLUORESCENT LIGHT-3 n INCANDESCENT For subjects in direct sunlight. For subjects in the shade. Use under “daylight” fluorescent lights. Use under “warm white” fluorescent lights. Use under “cool white” fluorescent lights. Use under incandescent lighting. Reduces the blue cast typically associated with underwater g UNDERWATER lighting. 111 N • In conditions in which AUTO fails to produce the desired results—for example, under certain types of lighting or in close-ups of portrait subjects—use custom white balance or choose a white balance option suited to the light source. • White balance is adjusted for flash lighting only in AUTO, WA WHITE PRIORITY, AA AMBIENCE PRIORITY, and g modes. Turn the flash off using other white balance options. • White balance options can also be accessed via shortcuts (P 242). Fine-Tuning White Balance Pressing MENU/OK after selecting a white balance option displays a fine-tuning dialog; use the focus stick (focus lever) to fine-tune white balance. WB SHIFT SET N • To exit without fine-tuning white balance, press DISP/BACK after selecting a white balance option. 6 • You cannot tilt the focus stick diagonally when fine-tuning white balance. The Shooting Menus 112 IMAGE QUALITY SETTING (Still Photography) Custom White Balance Choose k, l, or m to adjust white CUSTOM 1 balance for unusual lighting conditions using a white object as a reference (colored objects can also be used to lend photos a color cast). A white balance tarSHUTTER : NEW WB SHIFT NOT CHANGE get will be displayed; position and size the target so that it is filled by the reference object and press the shutter button all the way down to measure white balance (to select the most recent custom value and exit without measuring white balance, press DISP/BACK, or press MENU/OK to select the most recent value and display the fine-tuning dialog). • If “COMPLETED !” is displayed, press MENU/OK COMPLETED ! to set white balance to the measured value. • If “UNDER” is displayed, raise exposure compensation and try again. SET CANCEL • If “OVER” is displayed, lower exposure compensation and try again. 6 The Shooting Menus 113 k: Color Temperature Changing the color temperature changes overall hue. N Color temperature can be adjusted to make pictures “warmer” or “colder” or deliberately produce colors that differ radically from those in real life. 1 Select k in the white balance menu. The option currently selected for color temperature will be displayed. WHITE BALANCE COLOR TEMPERATURE R:0 B:0 SET 2 Edit the color temperature using the focus stick (focus lever) and press MENU/OK. A fine-tuning dialog will be displayed. SHIFT COLOR TEMPERATURE SET 6 SHIFT N • You can also adjust color temperature in increments of 10 K by The Shooting Menus rotating the rear command dial. • Choose from values of from 2500 to 10000 K. • To exit without fine-tuning white balance, press DISP/BACK after choosing a color temperature. 3 4 Highlight a fine-tuning amount using the focus stick. Press MENU/OK. The changes will be applied. The selected color temperature will appear in the display. 114 IMAGE QUALITY SETTING (Still Photography) Color Temperature Color temperature is an objective measure of the color of a light source, expressed in Kelvin (K). Light sources with a color temperature close to that of direct sunlight appear white; light sources with a lower color temperature have a yellow or red cast, while those with a higher color temperature are tinged with blue. DYNAMIC RANGE Control contrast. Choose lower values to increase contrast when shooting indoors or under overcast skies, higher values to reduce loss of detail in highlights when photographing high-contrast scenes. Higher values are recommended for scenes that include both sunlight and deep shade, for such high-contrast subjects as sunlight on water, brightly-lit autumn leaves, and portraits taken against a blue sky, and for white objects or people wearing white. Options AUTO V 100% W 200% X 400% O Mottling may appear in pictures taken at higher values. Choose a value according to the scene. V 100% or W 200% according to the subject and shooting conditions. Shutter speed and aperture will be displayed when the shutter button is pressed halfway. • W 200% is available at sensitivities of from ISO 320 to ISO 12800, X 400% at sensitivities of from ISO 640 to 12800. 115 The Shooting Menus N • If AUTO is selected, the camera will automatically choose either 6 D RANGE PRIORITY Reduce loss of detail in highlights and shadows for natural-looking results when photographing high-contrast scenes. Option AUTO STRONG WEAK OFF Description Contrast is adjusted automatically in response to lighting conditions. Adjust dynamic range by a large amount for very high-contrast scenes. Adjust dynamic range by a smaller amount for moderately high-contrast scenes. Contrast reduction off. N • WEAK is available at sensitivities of from ISO 320 to ISO 12800, STRONG at sensitivities of from ISO 640 to 12800. • When an option other than OFF is selected, TONE CURVE, and DYNAMIC RANGE will be adjusted automatically. 6 The Shooting Menus TONE CURVE With reference to a tone curve, adjust the appearance of highlights or shadows, making them harsher or softer. Choose higher values to make shadows and highlights harsher, lower values to make them softer. Option HIGHLIGHTS SHADOWS 116 Description -2 to +4 -2 to +4 TONE CURVE HIGHLIGHTS SHADOWS SET CANCEL IMAGE QUALITY SETTING (Still Photography) COLOR Adjust color density. Choose higher values to increase saturation, lower values to reduce it. −4 −3 −2 −1 Options 0 +1 +2 +3 +4 SHARPNESS Sharpen or soften outlines. Choose higher values for sharper outlines, lower values for softer outlines. −4 −3 −2 −1 Options 0 +1 +2 +3 +4 HIGH ISO NR Reduce noise in pictures taken at high sensitivities. Choose higher values to reduce noise and smooth outlines, lower values to leave outlines visible. −4 −3 −2 −1 Options 0 +1 +2 +3 +4 6 The Shooting Menus 117 CLARITY Increase definition while altering tones in highlights and shadows as little as possible. Choose higher values for increased definition, lower values for a softer effect. −5 −4 −3 −2 −1 Options 0 +1 +2 +3 +4 +5 O The additional processing required at settings other than 0 increases the time need to save each shot. N Clarity is adjusted automatically when the mode dial is rotated to AUTO or SP. LONG EXPOSURE NR Select ON to reduce mottling in long time-exposures. Options ON OFF O The additional processing required when ON is selected increases save 6 times. The Shooting Menus LENS MODULATION OPTIMIZER Select ON to improve definition by adjusting for diffraction and the slight loss of focus at the periphery of the lens. Options ON 118 OFF IMAGE QUALITY SETTING (Still Photography) COLOR SPACE Choose the gamut of colors available for color reproduction. Option sRGB Adobe RGB Description Recommended in most situations. For commercial printing. PIXEL MAPPING Use this option if you notice bright spots in your pictures. 1 Press MENU/OK in the shooting display and select the H IMAGE QUALITY SETTING tab. 2 Highlight PIXEL MAPPING and press MENU/OK to perform pixel mapping. O • Results are not guaranteed. • Be sure the battery is fully charged before beginning pixel mapping. • Pixel mapping is not available when the camera temperature is elevated. • Processing may take a few seconds. 6 The Shooting Menus 119 EDIT/SAVE CUSTOM SETTING Save custom camera settings for commonly-encountered situations. Saved settings can be recalled by rotating the mode dial to positions C1 (CUSTOM 1) through C4 (CUSTOM 4) (P 67). xF MOUNT ADAPTER SETTING Adjust settings for lenses attached via a mount adapter. The camera can store settings for multiple lenses (LENS 1 through LENS 6). N Any changes made using this item also apply in movie mode (P 166). Choosing a Focal Length Enter the lens’s true focal length. LENS 5 INPUT FOCAL LENGTH SET 6 The Shooting Menus Distortion Correction Choose from STRONG, MEDIUM, or WEAK options to correct BARREL or PINCUSHION distortion. 120 LENS5 DISTORTION CORRECTION BARREL STRONG BARREL MEDIUM BARREL WEAK OFF PINCUSHION WEAK PINCUSHION MEDIUM PINCUSHION STRONG CANCEL IMAGE QUALITY SETTING (Still Photography) Color Shading Correction Color (shading) variations between the center and edges of the frame can be adjusted separately for each corner. To use color shading correction, follow the steps below. NEXT SET 1 Rotate the rear command dial to choose a corner. The selected corner is indicated by a triangle. 2 Use the focus stick (focus lever) to adjust shading until there is no visible difference in color between the selected corner and the center of the image. • Press the focus stick left or right to adjust colors on the cyan–red axis. • Press the focus stick up or down to adjust colors on the blue–yellow axis. N To determine the amount required, adjust color shading correction while taking photos of blue sky or a sheet of gray paper. 6 N To determine the amount required, adjust peripheral illumination correction while taking photos of blue sky or a sheet of gray paper. EDIT LENS NAME Change the lens name. 121 The Shooting Menus Peripheral Illumination Correction Choose from values between –5 and +5. Choosing positive values increases peripheral illumination, while choosing negative values reduces peripheral illumination. Positive values are recomSET CANCEL mended for vintage lenses, negative values to create the effect of images taken with an antique lens or a pinhole camera. AF/MF SETTING (Still Photography) Adjust focus settings for still photography. To display AF/MF settings, press MENU/OK in the photo shooting display and select the G (AF/MF SETTING) tab. AF/MF SETTING FOCUS AREA FOCUS MODE AF MODE AF-C CUSTOM SETTINGS STORE AF MODE BY ORIENTATION AF POINT DISPLAY NUMBER OF FOCUS POINTS PRE-AF EXIT N The options available vary with the shooting mode selected. FOCUS AREA Choose the focus area for autofocus, manual focus, and focus zoom (P 75). FOCUS MODE Choose how the camera focuses (P 71). 6 AF MODE Choose how the camera focuses in modes l and k (P 73). The Shooting Menus 122 AF/MF SETTING (Still Photography) AF-C CUSTOM SETTINGS Select focus-tracking options for CONTINUOUS AF focus mode. Choose from Sets 1 (SET 1) through 5 (SET 5) according to your subject or select SET 6 CUSTOM for custom focus-tracking options. AF-C CUSTOM SETTINGS SET 1 MULTI PURPOSE TRACKING SENSITIVITY SPEED TRACKING SENSITIVITY ZONE AREA SWITCHING AUTO OK Option 123 6 The Shooting Menus Description A standard tracking option that works well with SET 1 MULTI PURPOSE the typical range of moving subjects. The focus system attempts to track the chosen SET 2 IGNORE OBSTACLES & subject. Choose with subjects that are hard to CONTINUE TO TRACK SUBJECT keep in the focus area or if other objects are likely to enter the focus area with the subject. The focus system attempts to compensate for SET 3 FOR ACCELERATING/ subject acceleration or deceleration. Choose for DECELERATING SUBJECT subjects prone to rapid changes in velocity. The focus system attempts to focus quickly on SET 4 FOR SUDDENLY APPEARING subjects entering the focus area. Choose for SUBJECT subjects that appear abruptly or when rapidly switching subjects. Choose for hard-to-track subjects prone not only SET 5 FOR ERRATICALLY MOVING to sudden changes in velocity but also to large & ACCEL./DECEL. SUBJECT movements front to back and left to right. Adjust TRACKING SENSITIVITY, SPEED TRACKING SENSITIVITY, and ZONE AREA SET 6 CUSTOM SWITCHING to suit your preferences based on the values for Sets 1–5 (P 124, 126). Focus Tracking Options The individual parameters that are part of a focus tracking set are described below. TRACKING SENSITIVITY This parameter determines how long the camera waits to switch focus when an object enters the focus area behind or in front of the current subject. The higher the value, the longer the camera will wait. TRACKING SENSITIVITY QUICK LOCKED ON SETS THE TRACKING SENSITIVITY ON THE SUBJECT ADJUST 0 1 Options 2 3 SWITCH 4 O • The higher the value, the longer it takes the camera to refocus when you attempt to switch subjects. • The lower the value, the more likely the camera is to switch focus from your subject to other objects in the focus area. 6 The Shooting Menus SPEED TRACKING SENSITIVITY This parameter determines how sensitive the tracking system is to changes in subject velocity. The higher the value, the greater the precision with which the system attempts to respond to sudden movement. 0 Options 1 SPEED TRACKING SENSITIVITY STEADY ACCEL./DECEL. SETS THE SPEED TRACKING SENSITIVITY FOR MOVING SUBJECT ADJUST SWITCH 2 O The higher the value, the more difficulty the camera will have focusing in situations in which autofocus does not perform well, such as when the subject is highly reflective or low in contrast. 124 AF/MF SETTING (Still Photography) ZONE AREA SWITCHING This parameter determines the focus area given priority in zone AF. ZONE AREA SWITCHING CENTER AUTO FRONT SETS THE SWITCHING SENSITIVITY OF FOCUS FRAME IN ZONE AREA ADJUST Option FRONT AUTO CENTER SWITCH Description Zone AF assigns priority to the subjects closest to the camera. The camera locks focus on the subject at the center of the zone and then switches focus areas as necessary to track it. Zone AF assigns priority to subjects in the center of the zone. O This option takes effect only when y ZONE is selected for AF mode. ZONE AREA SWITCHING AUTO CENTER AUTO FRONT AUTO 125 6 The Shooting Menus Set Values Parameter values for the different sets are listed below. TRACKING SPEED TRACKING SENSITIVITY SENSITIVITY SET 1 2 0 SET 2 3 0 SET 3 2 2 SET 4 0 1 SET 5 3 2 Custom Focus Tracking Options Follow the steps below to adjust settings for Set 6. 1 Select AF-C CUSTOM SETTINGS > SET 6 CUSTOM. AF-C CUSTOM SETTINGS SET 6 CUSTOM TRACKING SENSITIVITY SPEED TRACKING SENSITIVITY ZONE AREA SWITCHING ADJUST AUTO SET DETAIL RESET 2 Highlight items using the focus stick (focus lever) and rotate the front command dial to change. To reset settings to their original values, press b. 3 Press DISP/BACK when settings are complete. 6 The Shooting Menus 126 AF/MF SETTING (Still Photography) STORE AF MODE BY ORIENTATION Choose whether the AF mode used when the camera is in portrait orientation is stored separately from that used when the camera is in landscape orientation. Option OFF FOCUS AREA ONLY ON Description The same settings are used in both orientations. The focus area for each orientation can be selected separately. The focus mode and focus area can be selected separately. AF POINT DISPLAY yz Choose whether individual focus frames are displayed when ZONE or WIDE/TRACKING is selected for G AF/MF SETTING > AF MODE. Options ON OFF Option Description Choose from 117 focus points arranged in a 9- by 13-point 117 POINTS (9 × 13) grid. Choose from 425 focus points arranged in a 17- by 25-point 425 POINTS (17 × 25) grid. 127 6 The Shooting Menus NUMBER OF FOCUS POINTS Choose the number of focus points available for focus-point selection in manual focus mode or when SINGLE POINT is selected for AF MODE. PRE-AF If ON is selected, the camera will continue to adjust focus even when the shutter button is not pressed halfway. The camera adjusts focus continuously, allowing it to focus faster when the shutter button is pressed halfway. Choosing this option helps prevent missed shots. Options ON OFF O Choosing ON increases the drain on the battery. xF AF ILLUMINATOR If ON is selected, the AF-assist illuminator will light to assist autofocus. Options ON OFF O • The camera may be unable to focus using the AF-assist illuminator in some cases. 6 • If the camera is unable to focus, try increasing the distance to the The Shooting Menus subject. • Avoid shining the AF-assist illuminator directly into your subject’s eyes. N Any changes made using this item also apply in movie mode (P 168). 128 AF/MF SETTING (Still Photography) FACE/EYE DETECTION SETTING If the camera detects human faces, it will assign them priority over the background and adjust settings appropriately for portraits when setting focus and exposure. You can also choose whether the camera focuses on the left or right eye when face detection is on. Option Description Adjust settings for Intelligent Face Detection. You can also adjust eye detection settings. • g EYE OFF: Intelligent Face Detection only. u EYE AUTO: The camera automatically chooses which eye FACE DETECTION • to focus on when a face is detected. ON • w RIGHT EYE PRIORITY: The camera focuses on the right eye of subjects detected using Intelligent Face Detection. • v LEFT EYE PRIORITY: The camera focuses on the left eye of subjects detected using Intelligent Face Detection. OFF Intelligent Face Detection and eye priority off. 129 6 The Shooting Menus O • If the subject moves as the shutter button is pressed, the face may not be in the area indicated by the green border when the picture is taken. • In some modes, the camera may set exposure for the frame as a whole rather than the portrait subject. N • The face selected by the camera is indicated by a green border. Any 6 The Shooting Menus other faces detected by the camera are indicated by gray borders. To have the camera focus on a different subject, tap inside the gray border. The g icon will change from white to green. • When DIRECT AF POINT SELECTION/FACE SELECT is chosen for D BUTTON/DIAL SETTING > FOCUS LEVER SETTING > TILT o, you can also switch subjects using the focus stick (focus lever) or (during viewfinder photography) touch controls (P 21). • To switch from face detection to manual focus-area selection, press the center of the focus stick (focus lever). Press again to re-enable face detection. • If the selected subject leaves the frame, the camera will wait a set time for its return and consequently the green frame may sometimes appear in locations where no face is seen. • You cannot switch subjects during burst photography. • Depending on shooting conditions, face selection may be suspended at the close of burst shooting. • Faces can be detected with the camera in vertical or horizontal orientation. • If the camera is unable to detect the subject’s eyes because they are hidden by hair, glasses, or other objects, the camera will instead focus on faces. • Face/eye detection options can also be accessed via shortcuts (P 242). 130 AF/MF SETTING (Still Photography) AF+MF If ON is selected in focus mode l and focus has been locked (whether by pressing the shutter button halfway or by other means), focus lock can be ended and focus adjusted manually by rotating the focus ring. Options ON OFF O • Lenses with a focus distance indicator must be set to manual focus mode (MF) before this option can be used. Selecting MF disables the focus distance indicator. • If the lens is equipped with a focus distance indicator, set the focus ring to the center, as the camera may fail to focus if the ring is set to infinity or the minimum focus distance. N STANDARD and FOCUS PEAK HIGHLIGHT MF assist options can be selected using MF ASSIST. 131 6 The Shooting Menus AF + MF Focus Zoom When ON is selected for G AF/MF SETTING > FOCUS CHECK and SINGLE POINT selected for AF MODE, focus zoom can be used to zoom in on the selected focus area. The zoom ratio can be selected using the rear command dial. MF ASSIST Choose how focus is displayed in manual focus mode. Option Description Focus is displayed normally (focus peaking, digital split image, and STANDARD digital microprism are not available). Displays a black-and-white (MONOCHROME) or color (COLOR) DIGITAL SPLIT split image in the center of the frame. Frame the subject in the IMAGE split-image area and rotate the focus ring until the four parts of the split image are correctly aligned. A grid pattern that emphasizes blur is displayed when the subject DIGITAL is out of focus, disappearing to be replaced by a sharp image when MICROPRISM the subject is in focus. FOCUS PEAK The camera heightens high-contrast outlines. Choose a color and HIGHLIGHT peaking level. 6 FOCUS CHECK If ON is selected, the display will automatically zoom in on the selected focus area when the focus ring is rotated in manual focus mode. The Shooting Menus Options ON OFF N • Press the focus stick (focus lever) to cancel focus zoom. • The zoom position is centered on the current focus area and changes when the focus area is changed. 132 AF/MF SETTING (Still Photography) INTERLOCK SPOT AE & FOCUS AREA Select ON to meter the current focus frame when SINGLE AF or CONTINUOUS AF is selected for FOCUS MODE. Options ON OFF xF INSTANT AF SETTING Chooses how the camera focuses when a button to which focus lock or AF-ON is assigned is pressed with MANUAL FOCUS selected for FOCUS MODE. Options AF-S N AF-C Any changes made using this item also apply in movie mode (P 170). Options PIXEL BASIS FILM FORMAT BASIS N Any changes made using this item also apply in movie mode (P 170). 133 6 The Shooting Menus xF DEPTH-OF-FIELD SCALE Choose FILM FORMAT BASIS to help you make practical assessments of depth of field for pictures that will be viewed as prints and the like, PIXEL BASIS to help you assess depth of field for pictures that will be viewed at high resolutions on computers or other electronic displays. RELEASE/FOCUS PRIORITY Choose how the camera focuses when the shutter button is pressed all the way down with SINGLE AF or CONTINUOUS AF selected for FOCUS MODE. Option RELEASE FOCUS Description Shutter response is prioritized over focus. Pictures can be taken when the camera is not in focus. Focus is prioritized over shutter response. Pictures can be only taken when the camera is in focus. xF AF RANGE LIMITER Limit the range of available focus distances for increased focus speed. Option OFF 6 CUSTOM The Shooting Menus PRESET1 PRESET2 Description Focus limiter disabled. Limit focus to a range of distances defined by a minimum and maximum. • OK: Limit focus to the selected range. • SET: Choose two objects and limit focus to the distance between them. Limit focus to a preset range. O • Choosing a focus range that includes distances shorter than the minimum focus distance of the lens disables the focus limiter. • The values listed and displayed for the focus limiter may differ from the actual focus distance. N • The following additional operations can be performed when CUSTOM is selected: - You can tap objects in the touch screen display to choose the focus range. - Instead of tapping an object in the display, you set the maximum focus distance to infinity by rotating the focus ring. • Any changes made using this item also apply in movie mode (P 170). 134 AF/MF SETTING (Still Photography) xF TOUCH SCREEN MODE Choose the shooting operations performed using touch controls. Mode Description Tap your subject in the display to focus and release the shutter. TOUCH In burst mode, pictures will be taken while you keep your finger SHOOTING on the display. • In focus mode S (AF-S), the camera focuses when you tap your AF AF OFF subject in the display. Focus locks at the current distance until you tap the AF OFF icon. • In focus mode C (AF-C), the camera initiates focus when you tap your subject display. The camera will continue to adjust focus for changes in the distance to the subject until you tap the AF OFF icon. • In manual focus mode (MF), you can tap the display to focus on the selected subject using autofocus. AREA Tap to select a point for focus or zoom. The focus frame will move to the selected point. OFF Touch controls disabled. 6 tor, select OFF for D BUTTON/DIAL SETTING > TOUCH SCREEN SETTING > x TOUCH SCREEN SETTING. • Any changes made using this item also apply in movie mode (P 171). 135 The Shooting Menus N • To disable touch controls and hide the touch screen mode indica- AF/MF SETTING (Still Photography) Touch Controls for Focus Zoom Different touch controls are used during focus zoom (focus check enabled). Central Area Tapping the center of the display performs the operations below. Mode TOUCH SHOOTING AF AREA OFF 6 Operation performed SINGLE AF/MANUAL FOCUS: Take a picture SINGLE AF: AF MANUAL FOCUS: Instant AF SINGLE AF: AF MANUAL FOCUS: Instant AF SINGLE AF/MANUAL FOCUS: OFF The Shooting Menus Other Areas Tapping other areas simply scrolls the display, whether during still photography or movie recording and regardless of the option selected for touch screen mode. 136 SHOOTING SETTING (Still Photography) Adjust shooting options for still photography. To display shooting settings, press MENU/OK in the photo shooting display and select the A (SHOOTING SETTING) tab. SHOOTING SETTING SCENE POSITION FILTER SETTING SPORTS FINDER MODE PRE-SHOT SELF-TIMER SAVE SELF-TIMER SETTING SELF-TIMER LAMP INTERVAL TIMER SHOOTING EXIT SCENE POSITION Choose a scene for SP mode (P 64). FILTER SETTING Choose the filter used when the mode dial is rotated to FILTER (P 66). 6 The Shooting Menus 137 SPORTS FINDER MODE Take pictures using the crop in the center of the display. Choose this option for pictures of athletes, birds, and other moving subjects. Option ON OFF Description Pictures are taken using a 1.25× crop, reducing the picture angle by an amount equivalent to increasing lens focal length by 1.25×; the crop is shown by a frame in the display. The 1.25× crop is disabled. N • The H IMAGE QUALITY SETTING > IMAGE SIZE item in the shooting menu is fixed at P. • The sports finder is not available in modes that offer an electronic shutter. 6 The Shooting Menus PRE-SHOT sJ To reduce the lag between your pressing the shutter button all the way down and the resulting picture being recorded to the memory card, the camera starts shooting with the electronic shutter when the shutter button is pressed halfway and saves a series shots starting just before the shutter button is pressed the rest of the way down. Options ON OFF N Pre-shot photography is available only when s ELECTRONIC SHUTTER is selected in CH (high speed burst) drive mode (P 144). 138 SHOOTING SETTING (Still Photography) SELF-TIMER Choose a shutter release delay. Option Description The shutter is released two seconds after the shutter button is pressed. Use to reduce blur caused by the camera moving when the shutter R 2 SEC button is pressed. The self-timer lamp blinks as the timer counts down. The shutter is released ten seconds after the shutter button is pressed. S 10 SEC Use for photographs in which you wish to appear yourself. The self-timer lamp blinks immediately before the picture is taken. OFF Self-timer off. If an option other than OFF is selected, the timer will start when the shutter button is pressed all the way down. The display shows the number of seconds remaining until the shutter is released. To stop the timer before the picture is taken, press DISP/BACK. 9 front of the lens can interfere with focus and exposure. • The self-timer turns off automatically when the camera is turned off. SAVE SELF-TIMER SETTING If ON is selected, the chosen self-timer setting will remain in effect after a picture is taken or the camera is turned off. Options ON OFF 139 6 The Shooting Menus O • Stand behind the camera when using the shutter button. Standing in SELF-TIMER LAMP If ON is selected, the self-timer lamp will light during self-timer photography. Select OFF when shooting night scenes or in other situations in which you would prefer that the lamp remain unlit. Options ON OFF INTERVAL TIMER SHOOTING Configure the camera to take photos automatically at a preset interval. 1 Select A SHOOTING SETTING in the shooting menu, highlight INTERVAL TIMER SHOOTING, and press MENU/OK. 2 Use the focus stick (focus lever) to choose the interval and number of shots. Press MENU/OK to proceed. INTERVAL/NUMBER OF TIMES INTERVAL NUMBER OF TIMES END 6 LATER The Shooting Menus ESTIMATED START TIME START 3 Use the focus stick to choose the starting time and then press MENU/OK. Shooting will start automatically. CANCEL 140 CANCEL START WAITING TIME PM CANCEL SHOOTING SETTING (Still Photography) O Interval timer photography cannot be used at a shutter speed of B (bulb) or with multiple exposure photography. In burst mode, only one picture will be taken each time the shutter is released. N • Use of a tripod is recommended. • Check the battery level before starting. We recommend using USB power source (P 238). • The display turns off between shots and lights a few seconds before the next shot is taken. • The display can be activated at any time by pressing the shutter button. • To continue shooting until the number of shots taken equals the number of exposures remaining at the time interval-timer photography started, set the number of shots to ∞. INTERVAL TIMER SHOOTING EXPOSURE SMOOTHING Select ON to automatically adjust exposure during interval-timer photography to prevent it changing dramatically between shots. Options ON OFF N • Large changes in subject brightness may make exposure appear er- 141 6 The Shooting Menus ratic. We recommend that you choose shorter values for INTERVAL TIMER SHOOTING > INTERVAL with subjects that brighten or dim dramatically during shooting. • In manual mode (mode M), exposure smoothing is only available if an AUTO option is selected for sensitivity. AE BKT SETTING Adjust exposure bracketing settings. Option Description Choose the number of shots in the bracketing sequence and the amount exposure is varied with each shot. FRAMES: Choose the number of shots in the bracketing • FRAMES/STEP SETTING sequence. • STEP: Choose the amount exposure is varied with each shot. • 1 FRAME: The shots in the bracketing sequence are taken one at a time. 1 FRAME/CONTINUOUS • CONTINUOUS: The shots in the bracketing sequence are taken in a single burst. SEQUENCE SETTING Choose the order in which the shots are taken. FILM SIMULATION BKT Choose the three film simulation types used for film simulation bracketing (P 108). 6 The Shooting Menus 142 SHOOTING SETTING (Still Photography) FOCUS BKT SETTING Choose from AUTO and MANUAL focus bracketing modes (P 91). PHOTOMETRY Choose how the camera meters exposure (P 85). 6 The Shooting Menus 143 SHUTTER TYPE Choose the shutter type. Choose the electronic shutter to mute the shutter sound. Option t MECHANICAL SHUTTER s ELECTRONIC SHUTTER Description Take pictures with the mechanical shutter. Take pictures with the electronic shutter. The camera chooses the mechanical or electronic u MECHANICAL + ELECTRONIC shutter according to shooting conditions. O When using the electronic shutter, note the following: • Distortion may be visible in shots of moving subjects. • Distortion may also be visible in hand-held shots taken at high shutter speeds; use of a tripod is recommended. • Banding and fog may occur in shots taken under fluorescent lights or other flickering or erratic illumination. • When taking pictures with the shutter muted (P 212), respect your subjects’ image rights and right to privacy. 6 N The following restrictions apply when the electronic shutter is used: The Shooting Menus • “Extended” sensitivity values are not supported • Long exposure noise reduction has no effect • The flash cannot be used 144 SHOOTING SETTING (Still Photography) FLICKER REDUCTION Reduce flicker in pictures and the display when shooting under fluorescent lighting and other similar light sources. Option ALL FRAMES FIRST FRAME OFF Description Flicker reduction is performed for all frames. Compared to when flicker reduction is performed only on the first frame, the frame advance rate for burst photography will drop. Flicker reduction is performed for the first frame only; in burst photography, the value measured for the first frame in each burst will be used for all subsequent shots. Flicker may be visible during burst photography. Flicker reduction disabled. O • Flicker reduction increases the time needed to record pictures. • OFF is selected for FLICKER REDUCTION when the electronic shutter is used. • Flicker reduction is not available during movie recording. 6 The Shooting Menus 145 IS MODE Reduce blur caused by camera shake or subject motion. Option Description L CONTINUOUS Image stabilization on. If + MOTION is selected, the camera + MOTION will adjust shutter speed to reduce motion blur when movl CONTINUOUS ing objects are detected. M SHOOTING As above, except that image stabilization is performed only when the shutter button is pressed halfway (focus mode + MOTION k only) or the shutter is released. If + MOTION is selected, m SHOOTING ONLY the camera will adjust shutter speed to reduce motion blur when moving objects are detected. Image stabilization off. Choose this option when using a OFF tripod. N + MOTION has no effect when sensitivity is set to a fixed value, and may also be unavailable at some other combinations of settings. The effect may vary with lighting conditions and the speed at which the object is moving. 6 The Shooting Menus ISO Adjust the camera’s sensitivity to light (P 83). 146 SHOOTING SETTING (Still Photography) xF WIRELESS COMMUNICATION Connect to smartphones running the latest version of the FUJIFILM Camera Remote app. The smartphone can then be used to: • Control the camera and take pictures remotely • Receive pictures uploaded from the camera • Browse the pictures on the camera and download selected pictures • Upload location data to the camera N For downloads and other information, visit: http://app.fujifilm-dsc.com/en/camera_remote/ 6 The Shooting Menus 147 FLASH SETTING (Still Photography) Adjust flash-related settings for still photography. To display flash settings, press MENU/OK in the photo shooting display and select the F (FLASH SETTING) tab. FLASH SETTING FLASH FUNCTION SETTING RED EYE REMOVAL TTL-LOCK MODE LED LIGHT SETTING COMMANDER SETTING CH SETTING EXIT FLASH FUNCTION SETTING Choose a flash control mode, flash mode, or sync mode or adjust the flash level. The options available vary with the flash. N For more information on flash settings, see “External Flash Units” (P 264) in “Peripherals and Optional Accessories”. 6 MODE Built-In Flash ADJUST END RED EYE REMOVAL Remove red-eye effects caused by the flash. The Shooting Menus Option Description A red-eye reduction pre-flash is combined with digital red-eye FLASH+REMOVAL removal. FLASH Flash red-eye reduction only. REMOVAL Digital red-eye removal only. OFF Flash red-eye reduction and digital red-eye removal off. N • Flash red-eye reduction can be used in TTL flash control mode. • Digital red-eye removal is performed only when a face is detected. • Digital red-eye removal is not available with RAW images. 148 FLASH SETTING (Still Photography) TTL-LOCK MODE Instead of adjusting flash level with each shot, TTL flash control can be locked for consistent results across a series of photographs. Option Description Flash output is locked at the value metered for the most LOCK WITH LAST FLASH recent photo. LOCK WITH METERING The camera emits a series of pre-flashes and locks flash FLASH output at the metered value. N • To use TTL lock, assign TTL-LOCK to a camera control and then use the control to enable or disable TTL lock (P 251). • Flash compensation can be adjusted while TTL lock is in effect. • Selecting LOCK WITH LAST FLASH displays an error message if no previously metered value exists. LED LIGHT SETTING Choose whether to use the flash unit’s LED video light (if available) as a catchlight or AF-assist illuminator when taking photos. Role of LED video light in still photography Catchlight AF-assist illuminator AF-assist illuminator and catchlight None N In some cases, this option can also be accessed via the FLASH FUNCTION SETTING menu. 149 6 The Shooting Menus Option CATCHLIGHT AF ASSIST AF ASSIST+CATCHLIGHT OFF FLASH SETTING (Still Photography) COMMANDER SETTING Choose groups when using the camera flash unit as a commander for Fujifilm optical wireless remote flash control. This option is available when the camera is used with clip-on flash units that support Fujifilm optical wireless flash control. Options Gr A Gr B Gr C OFF N In some cases, this option can also be accessed via the FLASH FUNCTION SETTING menu. CH SETTING Choose the channel used for communication between the commander and remote flash units. Separate channels can be used for different flash systems or to prevent interference when multiple systems are operating in close proximity. Options CH1 6 The Shooting Menus 150 CH2 CH3 CH4 MOVIE SETTING (Still Photography) Adjust options for movies shot during still photography using the t (movie recording) button. To display movie settings, press MENU/OK in the photo shooting display and select the B (MOVIE SETTING) tab. N The options available vary with the shooting mode selected. MOVIE SETTING MOVIE MODE FILE FORMAT FULL HD HIGH SPEED REC F IS MODE F IS MODE BOOST AUDIO SETTING MIC/REMOTE RELEASE EXIT MOVIE MODE This item is also found in the movie menus (P 154). Changes here also apply to the item in the movie menus. FILE FORMAT This item is also found in the movie menus (P 155). Changes here also apply to the item in the movie menus. F IS MODE This item is also found in the movie menus (P 160). Changes here also apply to the item in the movie menus. F IS MODE BOOST This item is also found in the movie menus (P 160). Changes here also apply to the item in the movie menus. 151 6 The Shooting Menus FULL HD HIGH SPEED REC This item is also found in the movie menus (P 156). Changes here also apply to the item in the movie menus. AUDIO SETTING Adjust audio-related settings for movie recording. INTERNAL MIC LEVEL ADJUSTMENT Adjust the recording level for the built-in microphone. Option AUTO MANUAL OFF Description The camera adjusts the recording level automatically. Adjust the recording level manually. Press the focus stick (focus lever) right to choose from 25 recording levels. Turn the built-in microphone off. EXTERNAL MIC LEVEL ADJUSTMENT Adjust the recording level for external microphones. Option AUTO MANUAL OFF Description The camera adjusts the recording level automatically. Adjust the recording level manually. Press the focus stick (focus lever) right to choose from 25 recording levels. Disable recording using external microphones. 6 The Shooting Menus MIC JACK SETTING Specify the type of hardware connected to the microphone jack. Option MIC LINE Description Choose this option for direct connection to an external microphone. Choose this option for external audio devices connected via line output. MIC LEVEL LIMITER Reduces distortion caused by input that exceeds the limits of the microphone’s audio circuits. Options ON 152 OFF MOVIE SETTING (Still Photography) WIND FILTER Choose whether to enable wind noise reduction during movie recording. Options ON OFF LOW CUT FILTER Choose whether to enable the low-cut filter, reducing low-frequency noise during movie recording. Options ON OFF HEADPHONES VOLUME Adjust the headphone volume. Option 0 1—10 Description Mute output to the headphones. Choose a volume of from 1 to 10. Options m MIC n REMOTE 153 6 The Shooting Menus MIC/REMOTE RELEASE Specify whether the device connected to the microphone/remote release connector is a microphone or a remote release. MOVIE SETTING (Movie Recording) Adjust options for movies shot with the mode dial rotated to F (movie). To display options for movie recording, press MENU/OK in the movie shooting display and select the B (MOVIE SETTING) tab. N The options available vary with the shoot- MOVIE SETTING SHOOTING MODE MOVIE MODE FILE FORMAT FULL HD HIGH SPEED REC FIX MOVIE CROP MAGNIFICATION F-Log RECORDING 4K MOVIE OUTPUT FULL HD MOVIE OUTPUT EXIT ing mode selected. SHOOTING MODE Choose a shooting mode for movies. Options PROGRAM AE 6 SHUTTER PRIORITY AE APERTURE PRIORITY AE The Shooting Menus MOVIE MODE Before shooting movies, choose the frame rate, bit rate, and frame size and aspect ratio. 1 MANUAL MOVIE MODE In the shooting menu, select B MOVIE SETTING, then highlight MOVIE MODE and press MENU/OK. 154 MOVIE SETTING (Movie Recording) 2 Press the focus stick (focus lever) up or down to highlight the desired frame size and aspect ratio (A) and press the stick right. • Choose V16 : 9 or d17 : 9 for 4K movies with aspect ratios of 16 or 17 to 9. • Choose W16 : 9 or W17 : 9 for Full HD movies with aspect ratios of 16 or 17 to 9. 3 Press the focus stick (focus lever) up or down to highlight a frame rate (B) and press the stick right. 23.98P 4 24P 25P Options 29.97P 50P 59.94P Press the focus stick up or down to highlight a bit rate (C) and press MENU/OK. Options 100Mbps 50Mbps 200Mbps N The choice of frame and bit rates varies with the movie mode. 6 Option MOV/H.264 LPCM MP4/H.264 AAC Description High picture and sound quality. A format suitable for movies that will be uploaded to the web. N Movies are recorded to the memory card in 8-bit 4∶2∶0 and output to HDMI in 10-bit 4∶2∶2. 155 The Shooting Menus FILE FORMAT Choose a movie format. FULL HD HIGH SPEED REC Record high-frame-rate Full HD movies. High-frame-rate movies can be played back in slow motion, giving you time to view fast-moving subjects or details too fleeting for the naked eye. Select ON to choose the recording and playback rates separately. Playback 23.98P 24P Options 25P 29.97P 50P 59.94P Recording Options 100P 120P 200P 240P N • High-speed movies are recorded with no sound. • Maximum recording length is 6 minutes, but varies with camera settings. 6 • The footage recorded to the memory card is compressed with the The Shooting Menus goal of keeping the amount of data recorded to 200 Mbps per second. • The options available for playback rate vary with the option selected for rate of recording. 156 MOVIE SETTING (Movie Recording) FIX MOVIE CROP MAGNIFICATION C Fix the movie crop ratio at 1.29∶1. This makes it easier to match crops when filming in different formats. Options ON OFF F-Log RECORDING Select ON to record movies using a soft gamma curve with a wide gamut suitable for further processing post-production. Sensitivity is restricted to values between ISO 640 and 12800. Options ON OFF 6 The Shooting Menus 157 4K MOVIE OUTPUT Choose the destination for 4K movies shot while the camera is connected to an HDMI recorder or other device that supports 4K. Option b 4K Y 4K b 4K Y FHD b FHD Y 4K b − Y 4K Description 4K movies are recorded to the camera memory card and output to the HDMI device in 4K. 4K movies are recorded to a camera memory card in 4K and output to the HDMI device in Full HD. 4K movies are output to the HDMI device in 4K and recorded to the camera memory card in Full HD. 4K movies are output to the HDMI device in 4K. The camera does not record 4K movies to a memory card. N This option is only available when V 16 : 9 or d 17 : 9 is selected for B MOVIE SETTING > MOVIE MODE in the shooting menu. 6 FULL HD MOVIE OUTPUT Choose the destination for Full HD movies shot while the camera is connected to an HDMI device. Option The Shooting Menus Description Full HD movies are output to the HDMI device and recorded to b FHD Y FHD the camera memory card. Full HD movies are not recorded to the camera memory card b − Y FHD but are output to the HDMI device. N • This option is only available when W 16 : 9 or W 17 : 9 is selected for B MOVIE SETTING > MOVIE MODE in the shooting menu. • When OFF is selected for HDMI OUTPUT INFO DISPLAY, movies will be output to the HDMI device in 4:2:2 10-bit format. 158 MOVIE SETTING (Movie Recording) HDMI OUTPUT INFO DISPLAY If ON is selected, HDMI devices to which the camera is connected will mirror the information in the camera display. Options ON OFF 4K HDMI STANDBY QUALITY Choose whether output to connected HDMI devices switches from 4K to Full HD during standby. Option V W Description Output to HDMI devices continues at 4K during standby. Output to HDMI devices switches to Full HD during standby, reducing the drain on the battery. HDMI REC CONTROL Choose whether the camera sends movie start and stop signals to the HDMI device when the shutter button is pressed to start and stop movie recording. OFF F PHOTOMETRY Options are the same as those for still photography, but settings must be adjusted separately (P 143). N The photometry option selected in the photo menus applies to movies recorded using the t (movie recording) button. 159 The Shooting Menus Options ON 6 F IS MODE Reduce blur. Option IBIS/OIS IBIS/OIS + DIS OFF Description Enable in-body (IBIS) and optical (OIS) image stabilization. IBIS is used with lenses that do not support OIS. Enable in-body (IBIS), optical (OIS), and digital (DIS) image stabilization. The crop is adjusted according to the option selected for MOVIE MODE. Image stabilization off ; x appears in the display. Choose when the camera is mounted on a tripod or otherwise fixed in place. N • The setting selected with the lens image stabilization switch, if any, takes priority over the setting chosen with the IS mode. • Note that vibration or camera sounds may be noticeable as image stabilization takes effect. • IBIS/OIS + DIS is not available when high-speed Full HD recording is enabled. 6 F IS MODE BOOST Choose the image stabilization level. The Shooting Menus Option ON OFF Description Suitable for hand-held shooting with no panning. Suitable for hand-held shooting with panning. N Assigning IS MODE BOOST to a function button allows the image stabilization level to be changed while recording is in progress (P 251). 160 MOVIE SETTING (Movie Recording) F ISO Adjust the camera’s sensitivity to light. Option H (25600) 160–12800 AUTO Description Choose for special situations. Note that dynamic range may be reduced and that pictures may be mottled. Adjust sensitivity manually. Selected value is shown in display. Sensitivity is automatically adjusted in response to shooting conditions. ZEBRA SETTING Highlights that may be overexposed are shown by zebra stripes in the movie mode display. Option ZEBRA RIGHT ZEBRA LEFT OFF Description Right-slanting stripes. Left-slanting stripes. Stripes off. ZEBRA LEVEL Choose the brightness threshold for the zebra stripe display. 55 60 65 70 Options 75 80 85 90 95 100 MOVIE OPTIMIZED CONTROL oL Select ON to allow movie settings to be adjusted using only the command dials and touch-screen controls. You may find this helpful in preventing the sounds of camera controls being recorded with movies (P 23). Options ON OFF 161 The Shooting Menus 50 6 MOVIE SETTING (Movie Recording) TALLY LIGHT Choose the lamp (indicator or AF-assist) that lights during movie recording and whether the lamp blinks or remains steady. Indicator lamp 6 The Shooting Menus Option FRONT OFF REAR z FRONT OFF REAR y FRONT z REAR z FRONT z REAR OFF FRONT y REAR y FRONT y REAR OFF FRONT OFF REAR OFF AF-assist illuminator Description The indicator lamp lights during movie recording. The indicator lamp blinks during movie recording. The indicator and AF-assist lamps light during movie recording. The AF-assist lamp lights during movie recording. The indicator and AF-assist lamps blink during movie recording. The AF-assist lamp blinks during movie recording. The indicator and AF-assist lamps remain off during movie recording. xF WIRELESS COMMUNICATION This item is also found in the photo menus (P 147). 162 IMAGE QUALITY SETTING (Movie Recording) Adjust image quality settings for movies. To display image quality settings, press MENU/OK in the movie shooting display and select the H (IMAGE QUALITY SETTING) tab. IMAGE QUALITY SETTING FILM SIMULATION MONOCHROMATIC COLOR WHITE BALANCE DYNAMIC RANGE TONE CURVE COLOR SHARPNESS HIGH ISO NR EXIT N The options available vary with the shooting mode selected. F FILM SIMULATION Options are the same as those for still photography, but settings must be adjusted separately (P 108). F MONOCHROMATIC COLOR Options are the same as those for still photography, but settings must be adjusted separately (P 110). 163 6 The Shooting Menus F WHITE BALANCE Options are the same as those for still photography, but settings must be adjusted separately (P 111). F DYNAMIC RANGE Choose a dynamic range for movie recording. Option V100% W200% X400% Description See “DYNAMIC RANGE” (P 115). N • AUTO (automatic dynamic range control) is not available during movie recording. • W200% is available at sensitivities of from ISO 320 to ISO 12800, X400% at sensitivities of from ISO 640 to 12800. • The B MOVIE SETTING > F DYNAMIC RANGE option is available when OFF is selected for B MOVIE SETTING > F-Log RECORDING. F TONE CURVE Options are the same as those for still photography, but settings must be adjusted separately (P 116). 6 The Shooting Menus F COLOR Options are the same as those for still photography, but settings must be adjusted separately (P 117). 164 IMAGE QUALITY SETTING (Movie Recording) F SHARPNESS Options are the same as those for still photography, but settings must be adjusted separately (P 117). F HIGH ISO NR Options are the same as those for still photography, but settings must be adjusted separately (P 117). V INTERFRAME NR Select ON to enable interframe noise reduction. Options ON OFF N • Interframe noise reduction is available only when frame rates of 29.97P or slower are selected at a frame size of V or d. • “Ghosting” may occur with moving subjects or if the camera is moved during shooting. 6 The Shooting Menus 165 IMAGE QUALITY SETTING (Movie Recording) F PERIPHERAL LIGHT CORRECTION Select ON to enable peripheral illumination correction during movie recording. Options ON OFF N • If ON is selected when a lens that does not transmit data to the camera is attached using a FUJIFILM M MOUNT ADAPTER (available separately), peripheral illumination will be adjusted according to the option selected for H IMAGE QUALITY SETTING > xF MOUNT ADAPTER SETTING > PERIPHERAL ILLUMINATION CORRECTION in the shooting menu (P 121). • Select OFF if you notice banding in movies recorded using this option. xF MOUNT ADAPTER SETTING This item is also found in the photo menus (P 120). Changes to one apply to the other. 6 The Shooting Menus 166 AF/MF SETTING (Movie Recording) Adjust focus settings for movies. To display AF/MF settings, press MENU/OK in the movie shooting display and select the G (AF/MF SETTING) tab. AF/MF SETTING FOCUS AREA FOCUS MODE AF MODE AF-C CUSTOM SETTING AF ILLUMINATOR FACE/EYE DETECTION SETTING MF ASSIST FOCUS CHECK EXIT N The options available vary with the shooting mode selected. F FOCUS AREA Options are the same as those for still photography, but settings must be adjusted separately (P 122). F FOCUS MODE Choose the focus mode for movie recording. Option Description p MANUAL FOCUS Focus manually. k CONTINUOUS AF The camera focuses using AF-C. The camera focuses using AF-S. l SINGLE AF 6 Option MULTI AREA Description The camera selects the focus area automatically. The camera focuses on the subject in the selected focus area. 167 The Shooting Menus F AF MODE Choose how the camera selects the focus point for movie recording. F AF-C CUSTOM SETTING Select focus-tracking options when recording movies with CONTINUOUS AF selected for F FOCUS MODE. TRACKING SENSITIVITY Choose how long the camera waits to switch focus when an object enters the focus area behind or in front of the current subject. See “TRACKING SENSITIVITY” (P 124). 0 Options 2 1 3 4 O • The higher the value, the longer it takes the camera to refocus when you attempt to switch subjects. • The lower the value, the more likely the camera is to switch focus from your subject to other objects in the focus area. 6 AF SPEED Adjust the autofocus response speed. Choose higher values for faster response times, lower values for slower response times. The Shooting Menus −5 −4 −3 −2 −1 Options 0 +1 +2 +3 +4 +5 xF AF ILLUMINATOR This item is also found in the photo menus (P 128). Changes to one apply to the other. 168 AF/MF SETTING (Movie Recording) F FACE/EYE DETECTION SETTING Enable or disable Intelligent Face Detection when recording movies. Option FACE DETECTION ON OFF Description See “FACE/EYE DETECTION SETTING” (P 129). Intelligent Face Detection and eye priority off. O If SINGLE AF is chosen for FOCUS MODE when FACE DETECTION ON is selected for G AF/MF SETTING > FACE/EYE DETECTION SETTING, the camera will automatically switch to CONTINUOUS AF. Selecting MANUAL FOCUS when FACE DETECTION ON is selected for FACE/ EYE DETECTION SETTING disables Intelligent Face Detection. F MF ASSIST Choose how focus is displayed when MANUAL FOCUS is selected for FOCUS MODE. Option STANDARD 169 6 The Shooting Menus Description Focus is displayed normally (focus peaking is not available). The camera heightens high-contrast outlines. Choose a FOCUS PEAK HIGHLIGHT color and peaking level. F FOCUS CHECK Options are the same as those for still photography, but settings must be adjusted separately (P 132). xF INSTANT AF SETTING This item is also found in the photo menus (P 133). Changes to one apply to the other. xF DEPTH-OF-FIELD SCALE This item is also found in the photo menus (P 133). Changes to one apply to the other. xF AF RANGE LIMITER This item is also found in the photo menus (P 134). Changes to one apply to the other. 6 The Shooting Menus 170 AF/MF SETTING (Movie Recording) xF TOUCH SCREEN MODE Choose the shooting operations performed using touch controls. Mode OFF Touch controls disabled. 171 6 The Shooting Menus Description Instead of pressing the shutter button, you can tap your subject in the display to focus and start recording. During recording, you TOUCH SHOOTING can tap the display to focus as described below. To end recording, press the shutter button. Tapping the display focuses the camera on the selected point. Use the shutter button to start and stop recording. • When SINGLE AF is selected for FOCUS MODE, you can refocus at any time by tapping your subject in the display. • When CONTINUOUS AF is chosen for FOCUS MODE, the camera will continuously adjust focus for changes in the disAF tance to the subject at point selected by tapping the display. • When MANUAL FOCUS is selected for FOCUS MODE, the camera will focus using autofocus if you tap the display before recording begins; during recording, you can tap the display again to move the focus area to a new location. Tap to position the focus area. Use the shutter button to start and stop recording. • When SINGLE AF is selected for FOCUS MODE, you can reposition the focus area at any time by tapping your subject in the display. To focus, use the button to which AF-ON is assigned. AREA • When CONTINUOUS AF is chosen for FOCUS MODE, the camera will continuously adjust focus for changes in the distance to the subject at point selected by tapping the display. • When MANUAL FOCUS is selected for FOCUS MODE, you can tap the display to position the focus area over your subject. N • To disable touch controls and hide the touch screen mode indica- tor, select OFF for D BUTTON/DIAL SETTING > TOUCH SCREEN SETTING > x TOUCH SCREEN SETTING. • This item is also found in the photo menus (P 135). Changes to one apply to the other. Touch Controls for Focus Zoom Different touch controls are used during focus zoom (focus check enabled). Central Area Tapping the center of the display performs the operations below. Mode TOUCH SHOOTING 6 AF The Shooting Menus AREA OFF Operation performed SINGLE AF: AF MANUAL FOCUS: Instant AF SINGLE AF: AF MANUAL FOCUS: Instant AF SINGLE AF: AF MANUAL FOCUS: Instant AF SINGLE AF/MANUAL FOCUS: OFF Other Areas Tapping other areas simply scrolls the display, whether during still photography or movie recording and regardless of the option selected for touch screen mode. 172 AF/MF SETTING (Movie Recording) FOCUS CHECK LOCK Choose whether focus zoom remains in effect once movie recording begins. Options ON OFF 6 The Shooting Menus 173 AUDIO SETTING (Movie Recording) Adjust settings for audio recorded during filming. To display audio settings, press MENU/OK in the movie shooting display and select the P (AUDIO SETTING) tab. AUDIO SETTING INTERNAL MIC LEVEL ADJUSTMENT EXTERNAL MIC LEVEL ADJUSTMENT MIC JACK SETTING MIC LEVEL LIMITER WIND FILTER LOW CUT FILTER HEADPHONES VOLUME MIC/REMOTE RELEASE EXIT INTERNAL MIC LEVEL ADJUSTMENT Adjust the recording level for the built-in microphone. Option AUTO MANUAL OFF 6 Description The camera adjusts the recording level automatically. Adjust the recording level manually. Press the focus stick (focus lever) right to choose from 25 recording levels. Turn the built-in microphone off. EXTERNAL MIC LEVEL ADJUSTMENT Adjust the recording level for external microphones. The Shooting Menus Option AUTO MANUAL OFF 174 Description The camera adjusts the recording level automatically. Adjust the recording level manually. Press the focus stick (focus lever) right to choose from 25 recording levels. Disable recording using external microphones. AUDIO SETTING (Movie Recording) MIC JACK SETTING Specify the type of hardware connected to the microphone jack. Option MIC LINE Description Choose this option for direct connection to an external microphone. Choose this option for external audio devices connected via line output. MIC LEVEL LIMITER Reduces distortion caused by input that exceeds the limits of the microphone’s audio circuits. Options ON OFF WIND FILTER Choose whether to enable wind noise reduction during movie recording. 6 Options OFF LOW CUT FILTER Choose whether to enable the low-cut filter, reducing low-frequency noise during movie recording. Options ON OFF HEADPHONES VOLUME Adjust the headphone volume. Option 0 1—10 Description Mute output to the headphones. Choose a volume of from 1 to 10. 175 The Shooting Menus ON AUDIO SETTING (Movie Recording) MIC/REMOTE RELEASE Specify whether the device connected to the microphone/remote release connector is a microphone or a remote release. Options m MIC 6 The Shooting Menus 176 n REMOTE TIME CODE SETTING (Movie Recording) Adjust time code (hour, minute, second, and frame number) display settings for movie recording. To display time code settings, press MENU/OK in the movie shooting display and select the Q (TIME CODE SETTING) tab. TIME CODE SETTING TIME CODE DISPLAY START TIME SETTING COUNT UP SETTING DROP FRAME HDMI TIME CODE OUTPUT EXIT TIME CODE DISPLAY Select ON to display time codes during movie recording and playback. Options ON OFF START TIME SETTING Choose the time code starting time. 6 Description Highlight this option and press the focus stick (focus lever) MANUAL INPUT right to choose a start time manually. CURRENT TIME Set the start time to the current time. RESET Set the start time to 00:00:00. COUNT UP SETTING Choose whether time is clocked continuously or only during movie recording. Option REC RUN FREE RUN Description Time is clocked only during movie recording. Time is clocked continuously. 177 The Shooting Menus Option TIME CODE SETTING (Movie Recording) DROP FRAME At frame rates of 59.94P, and 29.97P, a discrepancy will gradually develop between the time code (measured in seconds) and the actual recording time (measured in fractions of a second). Choose whether the camera drops frames as necessary to match the recording time to the time code. Option ON OFF Description The camera drops frames as necessary to maintain a strict match between the time code and the actual recording time. Frames are not dropped. N • The time code display varies with the option selected. ON OFF 6 • Selecting a frame rate of 23.98P disables frame drop. The Shooting Menus HDMI TIME CODE OUTPUT Choose whether time codes are output to HDMI devices. Options ON 178 OFF Playback and the Playback Menu 179 The Playback Display This section lists the indicators that may be displayed during playback. O For illustrative purposes, displays are shown with all indicators lit. A B CD E F G H g Playback and the Playback Menu 7 f e d c I J b a Z Y K L X W V U T A Date and time..................................37, 39, 207 B Frame-number display C Face detection indicator ............................129 D Bluetooth ON/OFF.......................................234 E Image transfer order ...................................197 F Image transfer status ........................234, 278 G Number of frames selected for upload ...197 H Frame number..............................................231 I Protected image ...........................................192 J Location data.......................................239, 279 K Battery level ......................................................36 L Image quality................................................107 M Image size ......................................................106 N Film format ....................................................155 O Film simulation ............................................108 P Dynamic range ............................................115 Q HDR .....................................................................94 180 S R Q P O NM R White balance ..............................................111 S Sensitivity ..........................................................83 T Exposure compensation ...............................82 U Aperture...............................................57, 60, 62 V Shutter speed .....................................57, 58, 62 W Playback mode indicator .............................44 X Movie icon ........................................................52 Y Time code.......................................................177 Z HDR image .......................................................94 a Red-eye removal indicator...............148, 194 b Filter ....................................................................66 c Gift image .........................................................44 d Photobook assist indicator .......................199 e DPOF print indicator ...................................201 f Voice memo ..................................................195 g Rating..............................................................196 The Playback Display The DISP/BACK Button The DISP/BACK button controls the display of indicators during playback. Standard Information off Playback and the Playback Menu NEXT Info display 7 181 The Playback Display Viewing Photo Information The photo information display changes each time the focus stick (focus lever) is pressed up. Basic data Playback and the Playback Menu 7 Info display 1 NEXT LENS FOCAL LENGTH COLOR SPACE LENS MODULATION OPT. S.S F 23.0mm F5.6 23.0mm sRGB ON ISO BACK Info display 3 NEXT Info display 2 Zooming in on the Focus Point Press the center of the focus stick (focus lever) to zoom in on the focus point. Press again to return to full-frame playback. 182 Viewing Pictures Read this section for information on playback zoom and multi-frame playback. Use the rear command dial to go from full-frame playback to playback zoom or multi-frame playback. Full-frame playback Playback zoom Multi-frame playback DISP/BACK MENU/OK Nine-frame view Medium zoom Playback and the Playback Menu 100-0001 7 Hundred- frame view Maximum zoom 183 Viewing Pictures Playback Zoom Rotate the rear command dial right to zoom in on the current picture, left to zoom out. To exit zoom, press DISP/BACK or MENU/OK. N • The maximum zoom ratio varies with the option selected for H IMAGE QUALITY SETTING > IMAGE SIZE. • Playback zoom is not available with cropped or resized copies saved at a size of a. Playback and the Playback Menu 7 Scroll When the picture is zoomed in, the focus stick (focus lever) can be used to view areas of the image not currently visible in the display. Navigation window Multi-Frame Playback To change the number of images displayed, rotate the rear command dial left when a picture is displayed full frame. N • Use the focus stick (focus lever) to highlight images and press MENU/OK to view the highlighted image full frame. • In the nine- and hundred-frame displays, press the focus stick up or down to view more pictures. 184 The Playback Menu Adjust playback settings. The playback menu is displayed when you press MENU/OK in playback mode. PLAY BACK MENU RAW CONVERSION ERASE CROP RESIZE PROTECT IMAGE ROTATE RED EYE REMOVAL VOICE MEMO SETTING EXIT Saving RAW Pictures in Another Format 1 2 3 Display a RAW picture. Highlight RAW CONVERSION in the playback menu. Press MENU/OK. A list of settings will be displayed. RAW CONVERSION REFLECT SHOOTING COND. IMAGE SIZE IMAGE QUALITY PUSH/PULL PROCESSING DYNAMIC RANGE D RANGE PRIORITY CREATE 4 5 CANCEL Press the focus stick (focus lever) up or down to highlight a setting. Press the focus stick right to display RAW CONVERSION 撮影時条件を反映 options. 100% 増感/減感 200% ダイナミックレンジ 400% フィルムシミュレーション ホワイトバランス WBシフト 185 Playback and the Playback Menu RAW CONVERSION Even if you don’t have a computer, you can use the camera to modify RAW pictures and save them in other formats. 7 6 7 Press the focus stick up or down to highlight the desired option. 8 Press the Q button. A preview of the copy will be displayed. 9 Press MENU/OK. The copy will be saved. Press MENU/OK to select the highlighted option. The settings list shown in Step 3 will be displayed. Repeat Steps 4 to 7 to adjust additional settings. Playback and the Playback Menu N RAW conversion options can also be displayed by pressing the Q button when a RAW pictures is displayed during playback. 7 186 The Playback Menu The settings that can be adjusted when converting pictures from RAW to another format are: Setting O Some settings may be unavailable depending on the options chosen when the picture was taken. 187 Playback and the Playback Menu Description Create a copy using the settings in effect at the time REFLECT SHOOTING COND. the photo was taken. IMAGE SIZE Choose an image size. IMAGE QUALITY Adjust image quality. PUSH/PULL PROCESSING Adjust exposure. DYNAMIC RANGE Enhance details in highlights for natural contrast. Reduce loss of detail in highlights and shadows D RANGE PRIORITY for natural-looking results when photographing high-contrast scenes. FILM SIMULATION Simulate the effects of different types of film. MONOCHROMATIC COLOR Add a warm or cool cast to monochrome pictures. GRAIN EFFECT Add a film grain effect. Increase the range of tones available for rendering COLOR CHROME EFFECT colors that tend to be highly saturated, such as reds, yellows, and greens. Increase the range of tones available for rendering COLOR CHROME FX BLUE blues. WHITE BALANCE Adjust white balance. WB SHIFT Fine-tune white balance. TONE CURVE Adjust highlights and shadows. COLOR Adjust color density. SHARPNESS Sharpen or soften outlines. HIGH ISO NR Process the copy to reduce mottling. CLARITY Increase definition. Improve definition by adjusting for diffraction and LENS MODULATION OPTIMIZER the slight loss of focus at the periphery of the lens. COLOR SPACE Choose the color space used for color reproduction. HDR MODE Reduce loss of detail in highlights and shadows. 7 ERASE Delete individual pictures, multiple selected pictures, or all pictures. O Deleted pictures cannot be recovered. Protect important pictures or copy them to a computer or other storage device before proceeding. Option FRAME SELECTED FRAMES ALL FRAMES Description Delete pictures one at a time. Delete multiple selected pictures. Delete all unprotected pictures. Playback and the Playback Menu FRAME 1 Select FRAME for ERASE in the playback menu. 2 Press the focus stick (focus lever) left or right to scroll through pictures and press MENU/OK to delete. N • A confirmation dialog is not displayed before pictures are deleted; be sure the correct picture is selected before pressing MENU/OK. • Additional pictures can be deleted by pressing MENU/OK. Press the focus stick left or right to scroll through pictures and press MENU/OK to delete. 7 188 The Playback Menu SELECTED FRAMES 1 Select SELECTED FRAMES for ERASE in the playback menu. Highlight pictures and press MENU/OK to select. • Selected pictures are indicated by check marks (R). • To deselect a highlighted picture, press MENU/OK again. 3 When the operation is complete, press DISP/BACK to display a confirmation dialog. 4 Highlight OK and press MENU/OK to delete the selected pictures. N Pictures in photobooks or printer orders are shown by S. ALL FRAMES 1 Select ALL FRAMES for ERASE in the playback menu. 2 A confirmation dialog will be displayed; highlight OK and press MENU/OK to delete all unprotected pictures. N • Pressing DISP/BACK cancels deletion; note that any pictures deleted before the button was pressed cannot be recovered. • If a message appears stating that the selected images are part of a DPOF print order, press MENU/OK to delete the pictures. 189 Playback and the Playback Menu 2 7 CROP Create a cropped copy of the current picture. Playback and the Playback Menu 1 2 3 Display the desired picture. 4 5 Press MENU/OK to display a confirmation dialog. Select CROP in the playback menu. Use the rear command dial to zoom in and out and press the focus stick (focus lever) up, down, left, or right to scroll the picture until the desired portion is displayed. Press MENU/OK again to save the cropped copy to a separate file. N • The higher the zoom ratio, the smaller the number of pixels in the cropped copy. • If the size of the final copy will be a, YES will be displayed in yellow. • All copies have an aspect ratio of 3∶2. 7 190 The Playback Menu RESIZE Create a small copy of the current picture. 1 2 3 Display the desired picture. 4 Press MENU/OK again to save the resized copy to a separate file. Select RESIZE in the playback menu. Highlight a size and press MENU/OK to display a confirmation dialog. Playback and the Playback Menu N The sizes available vary with the size of the original image. 7 191 PROTECT Protect pictures from accidental deletion. Highlight one of the following options and press MENU/OK. Option FRAME SET ALL RESET ALL Description Protect selected pictures. Press the focus stick (focus lever) left or right to view pictures and press MENU/OK to select or deselect. Press DISP/BACK when the operation is complete. Protect all pictures. Remove protection from all pictures. Playback and the Playback Menu O Protected pictures will be deleted when the memory card is formatted. N Protecting images currently selected for upload to paired smartphones or tablets removes upload marking. 7 192 The Playback Menu IMAGE ROTATE Rotate pictures. 1 2 3 4 Select ON for D SCREEN SET-UP > AUTOROTATE PB. 5 Press MENU/OK. The picture will automatically be displayed in the selected orientation whenever it is played back on the camera. Display the desired picture. Select IMAGE ROTATE in the playback menu. Press the focus stick (focus lever) down to rotate the picture 90° clockwise, up to rotate it 90° counterclockwise. tating pictures. • The camera may not be able to rotate pictures created with other devices. Pictures rotated on the camera will not be rotated when viewed on a computer or on other cameras. • Pictures taken with D SCREEN SET-UP > AUTOROTATE PB are automatically displayed in the correct orientation during playback. Playback and the Playback Menu N • Protected pictures cannot be rotated. Remove protection before ro- 7 193 RED EYE REMOVAL Remove red-eye from portraits. The camera will analyze the image; if red-eye is detected, the image will be processed to create a copy with reduced red-eye. 1 2 3 Display the desired picture. Select RED EYE REMOVAL in the playback menu. Press MENU/OK. N • Results vary depending on the scene and the camera’s success in dePlayback and the Playback Menu tecting faces. • The amount of time needed to process the image varies with the number of faces detected. • Red eye cannot be removed from pictures that have already been processed using red-eye removal, which are indicated by a e icon during playback. • Red eye removal cannot be performed on RAW images. 7 194 The Playback Menu VOICE MEMO SETTING Add a voice memo to the current photograph. 1 2 3 Select ON for VOICE MEMO SETTING in the playback menu. Display a photo to which you wish to add a voice memo. Press and hold the AFON button to record a voice memo. Recording ends after 30 s or when you release the button. N • The new memo will be recorded over any existing memos. Playing Voice Memos Pictures with voice memos are indicated by q icons during playback. • To play the memo, press the AFON button. • A progress bar will be displayed while the memo plays back. • Volume can be adjusted by pressing MENU/OK to pause playback and then pressing the focus stick (focus lever) up or down to adjust the volume. Press MENU/OK again to resume playback. Volume can also be adjusted using D SOUND SET-UP > PLAYBACK VOLUME. Playback and the Playback Menu • Voice memos cannot be added to protected pictures. • Deleting the picture also deletes the memo. 7 195 RATING Rate pictures using stars. 1 2 Select RATING in the playback menu. Rotate the front command dial to choose a picture and the rear command dial to choose a rating of from 0 to 5 stars (“I”). N • The focus stick (focus lever) can be used in place of the front command dial to choose a picture. Playback and the Playback Menu • The rating dialog can also be displayed by pressing the AEL button in single-frame, nine-frame, or hundred-frame playback. • Use touch controls to zoom in or out. 7 196 The Playback Menu IMAGE TRANSFER ORDER Select photos for upload to a paired smartphone or tablet. 1 Select IMAGE TRANSFER ORDER > SELECT FRAMES in the playback menu. 2 Highlight photos and press MENU/OK to select or deselect. Repeat until all the desired photos have been selected. 3 Press DISP/BACK to exit to playback. N If ON is selected for both D CONNECTION SETTING > Bluetooth N • Image transfer orders can contain a maximum of 999 pictures. • The following cannot be selected for upload: - Protected pictures - Movies - RAW images - “Gift” pictures (pictures taken with other cameras) • If PAIRING/TRANSFER ORDER is selected for D CONNECTION SETTING > GENERAL SETTINGS > r BUTTON SETTING, the IMAGE TRANSFER ORDER dialog can be displayed by pressing the ISO button. • To remove upload marking from all pictures in the current order, select IMAGE TRANSFER ORDER > RESET ORDER. • If ON is selected for D CONNECTION SETTING > Bluetooth SETTINGS > AUTO IMAGE TRANSFER, photos will automatically be marked for upload as they are taken. 197 Playback and the Playback Menu SETTINGS > Bluetooth ON/OFF and AUTO IMAGE TRANSFER, upload will begin shortly after you exit to playback or turn the camera off. 7 xF WIRELESS COMMUNICATION Connect to smartphones running the latest version of the FUJIFILM Camera Remote app. The smartphone can then be used to: • Control the camera and take pictures remotely • Receive pictures uploaded from the camera • Browse the pictures on the camera and download selected pictures • Upload location data to the camera N For downloads and other information, visit: Playback and the Playback Menu http://app.fujifilm-dsc.com/en/camera_remote/ SLIDE SHOW View pictures in an automated slide show. Press MENU/OK to start and press the focus stick (focus lever) right or left to skip ahead or back. Press DISP/BACK at any time during the show to view onscreen help. The show can be ended at any time by pressing MENU/OK. N The camera will not turn off automatically while a slide show is in progress. 7 198 The Playback Menu PHOTOBOOK ASSIST Create books from your favorite photos. Creating a Photobook 1 Select NEW BOOK for C PLAY BACK MENU > PHOTOBOOK ASSIST. 2 Scroll through the images and press the focus stick (focus lever) up to select or deselect. Press MENU/OK to exit when the book is complete. for photobooks. • The first picture selected becomes the cover image. A different picture can be selected at any time. 3 Highlight COMPLETE PHOTOBOOK and press MENU/OK (to select all photos for the book, choose SELECT ALL). The new book will be added to the list in the photobook assist menu. N • Books can contain up to 300 pictures. • Books that contain no photos are automatically deleted. Playback and the Playback Menu N • Neither photographs a or smaller nor movies can be selected 7 199 Viewing Photobooks Highlight a book in the photobook assist menu and press MENU/OK to display the book, then press the focus stick (focus lever) left or right to scroll through the pictures. Playback and the Playback Menu Editing and Deleting Photobooks Display the photobook and press MENU/OK. The following options will be displayed; select the desired option and follow the onscreen instructions. • EDIT: Edit the book as described in “Creating a Photobook”. • ERASE: Delete the book. PC AUTO SAVE Upload pictures from the camera to a computer running the latest version of FUJIFILM PC AutoSave (note that you must first install the software and configure the computer as a destination for images copied from the camera). N For downloads and other information, visit: http://app.fujifilm-dsc.com/en/pc_autosave/ 7 200 The Playback Menu PRINT ORDER (DPOF) Create a digital “print order” for DPOF-compatible printers. 1 2 Select C PLAY BACK MENU > PRINT ORDER (DPOF). 3 Display a picture you wish to include in or remove from the print order. 4 Press the focus stick (focus lever) up or down to choose the number of copies (up to 99). Select WITH DATE s to print the date of recording on pictures, WITHOUT DATE to print pictures without dates, or RESET ALL to remove all pictures from the print order before proceeding. Total number of prints Number of copies Playback and the Playback Menu N • To remove a picture from the order, press the focus stick down 7 PRINT ORDER (DPOF) DPOF: 00001 01 SHEETS FRAME SET until the number of copies is 0. • Repeat steps 3–4 to complete the print order. 5 The total number of prints is displayed in the monitor. Press MENU/OK to exit. N • The pictures in the current print order are indicated by a u icon during playback. • Print orders can contain a maximum of 999 pictures from a single memory card. • If a memory card is inserted containing a print order created by an- other camera, you will need to delete the order before creating as described above. 201 instax PRINTER PRINT To print pictures to optional Fujifilm instax SHARE printers, first select D CONNECTION SETTING > instax PRINTER CONNECTION SETTING and enter the instax SHARE printer name (SSID) and password, then follow the steps below. 1 2 Playback and the Playback Menu 7 Turn the printer on. Select C PLAY BACK MENU > instax PRINTER PRINT. The camera will connect to the printer. PRINTER PRINT instax-12345678 CONNECTING FUJIFILM-CAMERA-1234 CANCEL 3 Use the focus stick (focus lever) to display the picture you want to print, then press MENU/OK. The picture will be sent to the printer and printing will start. PRINTER PRINT 100-0020 SET instax-12345678 CANCEL N • Pictures taken with other cameras cannot be printed. • The area printed is smaller than the area visible in the LCD monitor. • The displays may vary depending on the printer connected. 202 The Playback Menu DISP ASPECT Choose the aspect ratio used for the display of still pictures on High Definition (HD) devices (this option is available only when an HDMI cable is connected). Options 3:2 N Choose 16 : 9 to display photos with an aspect ratio of 16 : 9 full screen. The pictures will be displayed full screen with tops and bottoms cropped out. Playback and the Playback Menu 16 : 9 7 203 MEMO 204 The Setup Menus 205 USER SETTING Adjust basic camera settings. To access basic camera settings, press MENU/OK, select the D (SET UP) tab, and choose USER SETTING. USER SETTING FORMAT DATE/TIME TIME DIFFERENCE a MY MENU SETTING MY MENU SETTING SENSOR CLEANING SOUND & FLASH EXIT FORMAT To format a memory card: 1 2 The Setup Menus 8 Select D USER SETTING > FORMAT in the D (SET UP) tab. A confirmation dialog will be displayed. To format the memory card, highlight OK and press MENU/OK. FORMAT FORMAT OK? OK CANCEL N To exit without formatting the memory card, select CANCEL or press DISP/BACK. O • All data—including protected pictures—will be deleted from the memory card. Be sure important files have been copied to a computer or other storage device. • Do not open the battery-chamber cover during formatting. 206 USER SETTING DATE/TIME To set the camera clock: 1 2 Select D USER SETTING > DATE/TIME in the D (SET UP) tab. 3 Press MENU/OK to set the clock. Press the focus stick (focus lever) left or right to highlight the year, month, day, hour, or minute and press up or down to change. To change the order in which the year, month, and day are displayed, highlight the date format and press the focus stick up or down. TIME DIFFERENCE Switch the camera clock instantly from your home time zone to the local time at your destination when traveling. To specify the difference between your local and home time zone: Highlight g LOCAL and press MENU/OK. Use the focus stick (focus lever) to choose the time difference between local time and your home time zone. Press MENU/OK when settings are complete. To set the camera clock to local time, highlight g LOCAL and press MENU/OK. To set the clock to the time in your home time zone, select h HOME. Options g LOCAL h HOME N If g LOCAL is selected, g will be displayed in yellow for about three seconds when the camera is turned on. 207 The Setup Menus 1 2 8 Qa Choose a language. x MY MENU SETTING Edit the items listed in the E (MY MENU) tab, a personalized custom menu of frequently-used photo menu options (P 243). F MY MENU SETTING Edit the items listed in the E (MY MENU) tab, a personalized custom menu of frequently-used movie menu options (P 243). The Setup Menus 8 208 USER SETTING SENSOR CLEANING Remove dust from the camera image sensor. Option OK Description Clean the sensor immediately. Sensor cleaning will be performed when the camera is WHEN SWITCHED ON turned on. Sensor cleaning will be performed when the camera turns WHEN SWITCHED OFF off (sensor cleaning is not however performed if the camera turns off in playback mode). N Dust that cannot be removed using sensor cleaning can be removed using a blower (P 306). SOUND & FLASH Select OFF to disable the speaker, flash, illuminator, and self-timer lamp in situations in which camera sounds and lights may be unwelcome. The Setup Menus Options ON OFF 8 209 USER SETTING RESET Reset shooting or setup menu options to default values. 1 Highlight the desired option and press MENU/OK. Option Description Reset all photo menu settings other than custom white STILL MENU RESET balance and custom settings banks created using EDIT/ SAVE CUSTOM SETTING to default values. Reset all settings other than custom white balance opMOVIE MENU RESET tions selected using F WHITE BALANCE. Reset all setup menu settings other than DATE/TIME, TIME DIFFERENCE, COPYRIGHT INFO, and conSET-UP RESET nection-related CONNECTION SETTING options to default values. 2 A confirmation dialog will be displayed; highlight OK and press MENU/OK. The Setup Menus REGULATORY To view electronic copies of the product model number, and other certificates, select D USER SETTING > REGULATORY in the setup menu. 8 210 SOUND SETTING Make changes to camera sounds. To access sound settings, press MENU/OK, select the D (SET UP) tab, and choose SOUND SET-UP. SOUND SETTING AF BEEP VOL. SELF-TIMER BEEP VOL. OPERATION VOL. SHUTTER VOLUME SHUTTER SOUND PLAYBACK VOLUME EXIT AF BEEP VOL. Choose the volume of the beep that sounds when the camera focuses. The beep can be muted by selecting eOFF. Options b (high) c (medium) d (low) eOFF (mute) Options b (high) c (medium) d (low) eOFF (mute) The Setup Menus SELF-TIMER BEEP VOL. Choose the volume of the beep that sounds while the self-timer is active. The beep can be muted by selecting eOFF. 8 211 SOUND SETTING OPERATION VOL. Adjust the volume of the sounds produced when camera controls are operated. Choose eOFF to disable control sounds. Options b (high) c (medium) d (low) eOFF (mute) SHUTTER VOLUME Adjust the volume of the sounds produced by the electronic shutter. Choose eOFF to disable the shutter sound. Options b (high) c (medium) d (low) eOFF (mute) SHUTTER SOUND Choose the sound made by the electronic shutter. The Setup Menus Options j SOUND 2 i SOUND 1 k SOUND 3 PLAYBACK VOLUME Adjust the volume for movie playback. 0 8 212 1 2 3 4 Options 5 6 7 8 9 10 SCREEN SETTING Make changes to display settings. To access display settings, press MENU/OK, select the D (SET UP) tab, and choose SCREEN SET-UP. SCREEN SETTING VIEW MODE SETTING EVF BRIGHTNESS EVF COLOR EVF COLOR ADJUSTMENT LCD BRIGHTNESS LCD COLOR LCD COLOR ADJUSTMENT IMAGE DISP. EXIT VIEW MODE SETTING Adjust settings for eye sensor, EVF (electronic viewfinder), or LCD monitor view modes (P 14). EVF BRIGHTNESS Adjust the brightness of the display in the electronic viewfinder. MANUAL Description Automatic brightness adjustment. Adjust brightness manually; choose from options between −7 and +5. EVF COLOR Adjust the hue of the display in the electronic viewfinder. −5 −4 −3 −2 −1 Options 0 +1 +2 +3 +4 +5 213 The Setup Menus Option AUTO 8 EVF COLOR ADJUSTMENT Adjust the color of the display in the electronic viewfinder. 1 Adjust colors using the focus stick (focus lever). EVF COLOR ADJUSTMENT SET 2 CANCEL Press MENU/OK. LCD BRIGHTNESS Adjust monitor brightness. −5 The Setup Menus 8 −4 −3 −2 −1 Options 0 +1 +2 +3 +4 +5 −1 Options 0 +1 +2 +3 +4 +5 LCD COLOR Adjust monitor hue. −5 −4 −3 −2 LCD COLOR ADJUSTMENT Adjust the color of the display in the LCD monitor. 1 2 Adjust colors using the focus stick (focus lever). Press MENU/OK. 214 SCREEN SETTING IMAGE DISP. Choose how long images are displayed after shooting. Option CONTINUOUS 1.5 SEC 0.5 SEC OFF Description Pictures are displayed until the MENU/OK button is pressed or the shutter button is pressed halfway. To zoom in on the active focus point, press the center of the focus stick (focus lever); press again to cancel zoom. Pictures are displayed for the selected time or until the shutter button is pressed halfway. Pictures are not displayed after shooting. N • Colors may differ slightly from those in the final image. • “Noise” mottling may be visible at high sensitivities. AUTOROTATE DISPLAYS Choose whether the indicators in the viewfinder and LCD monitor rotate to match camera orientation. The Setup Menus Options ON OFF 8 215 PREVIEW EXP./WB IN MANUAL MODE Choose whether to enable exposure and/or white balance preview in manual exposure mode. Option Description PREVIEW EXP./WB Enable exposure and white balance preview. Preview white balance only. Choose this option in situations in which exposure and white balance are likely to change during PREVIEW WB shooting, as may be the case when you use a flash with an incandescent monitoring lamp. Disable exposure and white balance preview. Choose this opOFF tion when using a flash or on other occasions on which exposure may change when the picture is taken. NATURAL LIVE VIEW Choose whether the effects of film simulation, white balance, and other settings are visible in the monitor. The Setup Menus Option ON OFF 8 216 Description The effects of camera settings are not visible in the monitor, but shadows in low-contrast, back-lit scenes and other hardto-see subjects more visible. Colors and tone will differ from those in the final picture. The display will however be adjusted to show the effects of monochrome and sepia settings. The effects of film simulation, white balance, and other settings can be previewed in the monitor. SCREEN SETTING F-Log VIEW ASSIST Select ON to display a tone-corrected preview (equivalent to BT.709) when recording or viewing F-log movies. Options ON OFF FRAMING GUIDELINE Choose a framing grid for shooting mode. F GRID 9 Display A six-by-four grid. H HD FRAMING Frame HD pictures in the crop shown by the lines at the top and bottom of the display. N Framing guides are not shown at default settings but can be displayed using D SCREEN SET-UP > DISP. CUSTOM SETTING (P 218). The Setup Menus For “rule of thirds” composition. Option G GRID 24 8 217 AUTOROTATE PB Choose ON to automatically rotate “tall” (portrait-orientation) pictures during playback. Options ON OFF FOCUS SCALE UNITS Choose the units used for the focus distance indicator. Options METERS The Setup Menus 8 FEET APERTURE UNIT FOR CINEMA LENS Choose whether the camera displays aperture as a T-number (used for movie camera lenses) or an f/-number (used for still camera lenses) when an optional FUJINON MKX-series lens is attached. For information on using cinema lenses, see the documentation provided with the lens. Option T NUMBER F NUMBER Description A measure of lens aperture commonly used by cinematographers. Lens transmittance is taken into account to better calculate exposure. A measure of lens aperture commonly used by photographers. Lens transmittance is assumed to be 100%, meaning that the same aperture may produce different exposures depending on the lens. DISP. CUSTOM SETTING Choose the items shown in the standard indicator display (P 17). 218 SCREEN SETTING LARGE INDICATORS MODE(EVF) Select ON to display large indicators in the electronic viewfinder. The indicators displayed can be selected using D SCREEN SET-UP > LARGE INDICATORS DISP. SETTING. 5 4 3 2 1 0 -1 -2 -3 -4 -5 OFF ON O Some icons are not displayed when ON is selected for LARGE INDICATORS MODE(EVF) (P 11). N If LARGE INDICATORS MODE is assigned to a function button, the button can be used to toggle LARGE INDICATORS MODE on (ON) and off (OFF) (P 251). The Setup Menus LARGE INDICATORS MODE(LCD) Select ON to display large indicators in the LCD monitor. The indicators displayed can be selected using D SCREEN SET-UP > LARGE INDICATORS DISP. SETTING. 8 OFF ON O Some icons are not displayed when ON is selected for LARGE INDICATORS MODE(LCD) (P 13). N If LARGE INDICATORS MODE is assigned to a function button, the button can be used to toggle LARGE INDICATORS MODE on (ON) and off (OFF) (P 251). 219 LARGE INDICATORS DISP. SETTING Choose the indicators displayed when ON is selected for D SCREEN SET-UP > LARGE INDICATORS MODE(EVF) or LARGE INDICATORS MODE(LCD). Option A Expo. DISP. B d Scale C L1, L2, L3, L4 D R1, R2, R3, R4 The Setup Menus 8 LARGE INDICATORS DISP. SETTING 220 Scale Description Choose the items listed at the bottom of the display. Selected items are indicated by check marks (R); to deselect, highlight the check marks and press MENU/OK. Select ON to display the exposure indicator. Choose up to four large icons for display on the left side of the screen. Choose up to four large icons for display on the right side of the screen. INFORMATION CONTRAST ADJ. Adjust display contrast. Option HIGH CONTRAST STANDARD LOW CONTRAST DARK AMBIENT LIGHTING Expo. DISP. Description High contrast. Normal contrast. Low contrast. Contrast adjusted for dim ambient lighting. SCREEN SETTING x Q MENU BACKGROUND Choose the background color used for the quick menu when it is displayed during still photography. Options TRANSPARENT BLACK F Q MENU BACKGROUND Choose the background color used for the quick menu when it is displayed during movie recording. Options TRANSPARENT BLACK The Setup Menus 8 221 BUTTON/DIAL SETTING Access options for camera controls. To access control options, press MENU/OK, select the D (SET UP) tab, and choose BUTTON/DIAL SETTING. BUTTON/DIAL SETTING FOCUS LEVER SETTING EDIT/SAVE QUICK MENU EDIT/SAVE QUICK MENU FUNCTION (Fn) SETTING SHUTTER AF SHUTTER AE SHOOT WITHOUT LENS SHOOT WITHOUT CARD EXIT FOCUS LEVER SETTING Choose the functions performed by pressing the center of the focus stick (focus lever) or by pressing the stick up, down, left, or right. PUSH Option OFF The Setup Menus 8 Description Pressing the center of the stick has no effect. Press the center of the stick to view a focus-area display where you can choose the focus area. If FACE DETECTION EDIT FOCUS AREA ON is selected for FACE/EYE DETECTION SETTING, Intelligent Face Detection will be temporarily disabled. Press the center of the stick to zoom in on the active focus area (P 78). If FACE DETECTION ON is selected for ZOOM FACE/EYE DETECTION SETTING, Intelligent Face Detection will be temporarily disabled. 222 BUTTON/DIAL SETTING TILT o Option OFF DIRECT AF POINT SELECTION EDIT FOCUS AREA DIRECT AF POINT SELECTION/FACE SELECT Description Pressing the stick up, down, left, or right has no effect. Choose the focus area without leaving the shooting display. Press the stick up, down, left, or right to view a focus-area display and choose the focus area. Choose the focus area without leaving the shooting display. If FACE DETECTION ON is selected for FACE/EYE DETECTION SETTING, you can also choose the face used for focus. x EDIT/SAVE QUICK MENU Choose the items displayed in the quick menu during still photography (P 248). FUNCTION (Fn) SETTING Choose the roles played by the function buttons (P 251). The Setup Menus F EDIT/SAVE QUICK MENU Choose the items displayed in the quick menu when filming movies (P 248). 8 223 SHUTTER AF Choose whether the camera focuses when the shutter button is pressed halfway. Option Description AF-S • ON: Focus locks when the shutter button is pressed halfway. • OFF: No focus operation is performed when the shutter button is pressed halfway. • ON: The camera focuses while the shutter button is pressed halfAF-C way. • OFF: No focus operation is performed when the shutter button is pressed halfway. SHUTTER AE If ON is selected, exposure will lock while the shutter button is pressed halfway. N Select OFF to allow the camera to adjust exposure before each shot The Setup Menus taken in burst mode. 8 224 BUTTON/DIAL SETTING SHOOT WITHOUT LENS Choose ON to enable the shutter release when no lens is attached. Options ON OFF SHOOT WITHOUT CARD Choose whether the shutter can be released without a memory card inserted in the camera. Option Description When no memory card is inserted, the shutter can be released to test camera function and the shooting and setup menus can be displayed. The shutter is disabled if no memory card is inserted, preventing accidental loss of pictures taken without a memory card. ON OFF Options X CW (clockwise) Y CCW (counterclockwise) FOCUS RING OPERATION Choose how the camera adjusts focus in response to the movement of the focus ring. Option NONLINEAR LINEAR Description Focus is adjusted at the same rate as the ring is rotated. Focus is adjusted linearly according to the amount the ring is rotated, but the focusing speed is unaffected by the speed the ring is rotated. 225 The Setup Menus FOCUS RING Choose the direction in which the focus ring is rotated to increase the focus distance. 8 AE/AF-LOCK MODE This option determines the behavior of the button to which exposure and/or focus lock is assigned. Option Description AE&AF ON WHEN Exposure and/or focus will lock while the button is pressed. PRESSING AE&AF ON/OFF Exposure and/or focus will lock when the button is pressed and remain locked until it is pressed again. SWITCH AWB-LOCK MODE Choose the behavior of function buttons assigned auto white balance (AWB) lock. Auto white balance lock is used to lock white balance at the value metered by the camera when AUTO is selected for white balance. The Setup Menus Option Description AWB ON WHEN Auto white balance locks while the button is pressed. PRESSING AWB ON/OFF Press the button once to lock auto white balance and again to end the lock. SWITCH 8 226 BUTTON/DIAL SETTING TOUCH SCREEN SETTING Enable or disable touch-screen controls. x TOUCH SCREEN SETTING Option ON OFF Description The LCD monitor functions as a touch screen during shooting. Touch controls disabled. x DOUBLE TAP SETTING Option ON OFF Description Tap the LCD monitor twice to zoom in on your subject during shooting. Touch zoom disabled. c TOUCH FUNCTION Description Enable touch-function gestures. Disable touch-function gestures. The Setup Menus Option ON OFF a TOUCH SCREEN SETTING Option ON OFF Description The LCD monitor functions as a touch screen during playback. Touch controls disabled. 227 8 BUTTON/DIAL SETTING EVF TOUCH SCREEN AREA SETTINGS Select the area of the LCD monitor used for touch controls while the viewfinder is active. The area used for touch controls can be selected from: Option 6 0 2 4 1 3 5 OFF The Setup Menus 8 228 Description All. Right half. Top right quarter. Bottom right quarter. Left half. Top left quarter. Bottom left quarter. Touch controls disabled. POWER MANAGEMENT Adjust power management settings. To access power management settings, press MENU/OK, select the D (SET UP) tab, and choose POWER MANAGEMENT. POWER MANAGEMENT AUTO POWER OFF PERFORMANCE BOOST SETTING EXIT AUTO POWER OFF Choose the length of time before the camera turns off automatically when no operations are performed. Shorter times increase battery life; if OFF is selected, the camera must be turned off manually. Options 5 MIN 2 MIN 1 MIN 30 SEC 15 SEC OFF The Setup Menus 8 229 POWER MANAGEMENT PERFORMANCE Select BOOST to improve focus and EVF display performance. Option BOOST NORMAL Description Boost camera focus and EVF display performance. The battery drains faster than when is NORMAL selected. Choose for standard focus and EVF display performance and battery endurance. BOOST SETTING Adjust the behavior of the EVF and LCD monitor when BOOST is selected for PERFORMANCE. Option Description Display brightness is adjusted to make subjects in shadows LOW LIGHT PRIORITY easier to see. Motion blur may cause ghosting. RESOLUTION PRIORITY Display resolution is increased to make details easier to see. FRAME RATE PRIORITY The refresh rate for the EVF is increased, smoothing motion. The Setup Menus 8 230 SAVE DATA SETTING Make changes to file management settings. To access file management settings, press MENU/OK, select the D (SET UP) tab, and choose SAVE DATA SET-UP. SAVE DATA SETTING FRAME NO. SAVE ORG IMAGE EDIT FILE NAME SELECT FOLDER COPYRIGHT INFO EXIT FRAME NO. Frame number New pictures are stored in image files named using a four-digit file number assigned by adding one to the last file number used. The File file number is displayed during playback as Directory number number shown. FRAME NO. controls whether file numbering is reset to 0001 when a new memory card is inserted or the current memory card is formatted. CONTINUOUS RENEW Description Numbering continues from the last file number used or the first available file number, whichever is higher. Choose this option to reduce the number of pictures with duplicate file names. Numbering is reset to 0001 after formatting or when a new memory card is inserted. N • If the frame number reaches 999-9999, the shutter release will be disabled. Format the memory card after transferring to a computer any pictures you wish to keep. Next, reset frame numbering to 1000001 by inserting a formatted memory card, selecting RENEW for FRAME NO., and taking a picture. You can then set FRAME NO. to CONTINUOUS once more and continue shooting. • Selecting D USER SETTING > RESET does not reset the file number. • Frame numbers for pictures taken with other cameras may differ. 231 The Setup Menus Option 8 SAVE ORG IMAGE Choose ON to save unprocessed copies of pictures taken using RED EYE REMOVAL. Options ON OFF EDIT FILE NAME Change the file name prefix. sRGB images use a four-letter prefix (default “DSCF”), Adobe RGB images a three-letter prefix (“DSF”) preceded by an underscore. Option sRGB AdobeRGB The Setup Menus 8 232 Default prefix DSCF _DSF Sample file name ABCD0001 _ABC0001 SAVE DATA SETTING SELECT FOLDER Create folders and choose the folder used to store subsequent pictures. Option SELECT FOLDER CREATE FOLDER Description To choose the folder in which subsequent pictures will be stored, press the focus stick (focus lever) up or down to highlight an existing folder and press MENU/OK. Enter a five-character folder name to create a new folder in which to store subsequent pictures. The new folder will be created with the next picture you take and subsequent pictures will be stored in that folder. COPYRIGHT INFO Copyright information, in the form of Exif tags, can be added to new images as they are taken. Changes to copyright information are reflected only in images taken after the changes are made. The Setup Menus Option Description DISP COPYRIGHT INFO View the current copyright information. ENTER AUTHOR’S INFO Enter the creator’s name. ENTER COPYRIGHT INFO Enter the name of the copyright holder. Delete the current copyright information. This change applies DELETE COPYRIGHT INFO only to images taken after this option is selected; copyright information recorded with existing images is not affected. 8 233 CONNECTION SETTING Adjust settings for connection to other devices. To access connection settings, press MENU/OK, select the D (SET UP) tab, and choose CONNECTION SETTING. CONNECTION SETTING Bluetooth SETTINGS PC AUTO SAVE PRINTER CONNECTION SETTING CONNECTION MODE USB POWER SUPPLY SETTING GENERAL SETTINGS INFORMATION RESET WIRELESS SETTING EXIT N For more information on wireless connections, visit: http://fujifilm-dsc.com/wifi/ Bluetooth SETTINGS Adjust Bluetooth settings. Option PAIRING REGISTRATION The Setup Menus 8 Description Pair the camera with a smartphone running the FUJIFILM Camera Remote app. Choose a connection from a list of devices with which the SELECT PAIRING camera has been paired using PAIRING REGISTRATION. DESTINATION Select NO CONNECTION to exit without connecting. Delete pairing information for selected devices. Choose the deDELETE PAIRING vice in the device list. The selected device will also be removed REG. from the devices listed in SELECT PAIRING DESTINATION. • ON: The camera automatically establishes a Bluetooth conBluetooth ON/OFF nection with paired devices when turned on. • OFF: The camera does not connect via Bluetooth. • ON: Mark photos for upload as they are taken. Mark JPEG AUTO IMAGE photos for upload as they are taken. TRANSFER • OFF: Photos are not marked for upload as they are taken. Choose whether to synchronize the camera to the time and/or location provided by a paired smartphone. SMARTPHONE • LOCATION&TIME: Synchronize the time and location. SYNC. SETTING • LOCATION: Synchronize the location. • TIME: Synchronize the time. • OFF: Synchronization off. 234 CONNECTION SETTING N • Install the latest version of the FUJIFILM Camera Remote app on your smartphone or tablet before pairing the device with your camera or uploading images. • When ON is selected for both Bluetooth ON/OFF and AUTO IMAGE TRANSFER or images are currently selected for upload using the IMAGE TRANSFER ORDER option in the C (playback) menu, upload to paired devices will begin shortly after you exit to playback or turn the camera off. IMAGE TRANSFER ORDER can also be used to select pictures for upload when AUTO IMAGE TRANSFER is off. PC AUTO SAVE Adjust settings for connection to computers via wireless LAN. Option PC AUTO SAVE SETTING DELETE REGISTERED Remove selected destinations. DESTINATION PC DETAILS OF PREVIOUS View computers to which the camera has recently connected. CONNECTION N These settings also apply when pictures are downloaded to a computer using “FUJIFILM PC AutoSave” software. 235 The Setup Menus Description Choose the method used for connection to computers via a wireless LAN. • SIMPLE SETUP: Connect using WPS. • MANUAL SETUP: Choose the network from a list (SELECT FROM NETWORK LIST) or enter the name manually (ENTER SSID). 8 instax PRINTER CONNECTION SETTING Adjust settings for connection to optional Fujifilm instax SHARE printers. The Printer Name (SSID) and Password The printer name (SSID) can be found on the bottom of the printer; the default password is “1111”. If you have already chosen a different password to print from a smartphone, enter that password instead. The Setup Menus 8 236 CONNECTION SETTING CONNECTION MODE Adjust settings for connection to external devices. Option N For information on compatible computer software, see “Software for Use with Your Camera” (P 294). The Setup Menus Description Connecting the camera to a computer via USB automatically enables data transfer mode, allowing data to be copied to USB CARD READER the computer. The camera functions normally when not connected. The camera can be used as a webcam when connected to a X WEBCAM computer running FUJIFILM X Webcam. Connecting the camera to a computer via USB automatically enables USB RAW conversion/backup restore mode. The camera functions normally when not connected. USB RAW CONV. (requires FUJIFILM X RAW STUDIO): Use the camUSB RAW CONV./ • era’s image processing engine to rapidly convert RAW files BACKUP RESTORE to high-quality JPEG images. • BACKUP RESTORE (requires FUJIFILM X Acquire): Save and load camera settings. Reconfigure the camera in an instant or share settings with other cameras of the same type. 8 237 USB POWER SUPPLY SETTING Choose whether power is supplied to the camera when it is connected to a computer or other device via a USB cable. Option ON OFF Description The camera draws power from the connected device, reducing the drain on the camera battery. The camera does not draw power from the connected device. O The camera cannot draw power from Lightning connections or from devices that do not supply power. Select OFF before connecting the camera to such devices. The connection may not be available for data transfer or the like when ON is selected. N Regardless of the option selected, the battery will charge while the camera is off. The Setup Menus 8 238 CONNECTION SETTING GENERAL SETTINGS Adjust settings for connection to wireless networks. Option Description Choose a name (NAME) to identify the camera on the wireless NAME network (the camera is assigned a unique name by default). Choose whether to resize images for upload to smartphones. RESIZE IMAGE FOR Resizing applies only to the copy uploaded to the smartphone; SMARTPHONE the original is not affected. H • ON: Larger images are resized to H for upload. • OFF: Images are uploaded at their original size. Choose whether location data downloaded from a smartphone GEOTAGGING are embedded in pictures as they are taken. LOCATION INFO Display the location data last downloaded from a smartphone. INFORMATION View the camera’s MAC and Bluetooth address. The Setup Menus r BUTTON SETTING Choose the role played by the ISO button during playback. • r PAIRING/TRANSFER ORDER: The ISO button can be used for pairing and selecting images for transfer during playback. • r WIRELESS COMMUNICATION: The ISO button can be used during playback to establish wireless connections. 8 RESET WIRELESS SETTING Restore wireless settings to their default values. 239 MEMO 240 Shortcuts 241 Shortcut Options Customize camera controls to suit your style or situation. Frequently-used options can be added to “my menu” or the Q menu or assigned to the function buttons, the function dial, or touch function button flick gestures for direct access: Shortcut Option Description Add frequently-used options to this custom menu, “My menu” which can be viewed by pressing MENU/OK and selecting the E (“MY MENU”) tab. The Q menu is displayed by pressing the Q button. The Quick Menu Use the Q menu to view or change the options selected for frequently-used menu items. Use the function (Fn, t, ISO, Q, AEL, and AFON) butThe function button ton for direct access to selected features. Rotate the Fn (function) dial for direct access to seThe function dial lected features. Use touch function button flick gestures (T-Fn1, Touch-function T-Fn2, T-Fn3, and T-Fn4) for direct access to selected gestures features. Shortcuts 9 242 P 243 245 251 254 255 MY MENU Access a personalized menu of frequently-used options. To display “my menu”, press MENU/OK in the shooting display and select the E (MY MENU) tab. MY MENU SELF-TIMER INTERVAL TIMER SHOOTING FILM SIMULATION GRAIN EFFECT PHOTOMETRY SHUTTER TYPE IS MODE FACE/EYE DETECTION SETTING EXIT O The E tab is only available if options have been assigned to E MY MENU. MY MENU SETTING To choose the items listed in the E (MY MENU) tab: 1 In the setup menu, select D USER SETTING > x MY MENU SETTING or F MY MENU SETTING. MY MENU SETTING ADD ITEMS RANK ITEMS REMOVE ITEMS N To reorder items, select RANK ITEMS. To delete items, select REMOVE ITEMS. 2 N MY MENU SETTING IMAGE SIZE IMAGE QUALITY RAW RECORDING FILM SIMULATION MONOCHROMATIC COLOR GRAIN EFFECT COLOR CHROME EFFECT COLOR CHROME FX BLUE SELECT Shortcuts Press the focus stick (focus lever) up or down to highlight ADD ITEMS and press MENU/OK. Options that can be added to “my menu” are highlighted in blue. CANCEL 9 Items currently in “my menu” are indicated by check marks. 243 MY MENU 3 Choose a position for the item and press MENU/OK. The item will be added to “my menu”. SELECT ITEM LOCATION 1 IMAGE SIZE 2 IMAGE QUALITY MOVE 4 5 SAVE Press MENU/OK to return to the edit display. Repeat Steps 3 and 4 until all the desired items have been added. N “My menu” can contain up to 16 items. Shortcuts 9 244 The Quick Menu Use the quick menu for quick access to selected options. To view the quick menu, press the Q button. The Quick Menu Display The quick menu offers different options in photo and movie modes. At default settings, it contains the following items: Still photography SHOOTING MODE SET Default G IMAGE QUALITY H FILM SIMULATION I SELF-TIMER J FACE/EYE DETECTION SETTING K FLASH FUNCTION SETTING L EVF/LCD BRIGHTNESS The quick menu shows the options currently selected for items B–L, which can be changed. 245 Shortcuts A SHOOTING MODE B FOCUS MODE C AF MODE D DYNAMIC RANGE E HIGH ISO NR F IMAGE SIZE LONG PRESS EDIT/SAVE CUSTOM 9 Movie recording SHOOTING MODE SET A SHOOTING MODE B SHUTTER SPEED C MOVIE MODE RESOLUTION/ ASPECT RATIO D F WHITE BALANCE END Default E F FILM SIMULATION F F ISO G MOVIE MODE FRAME RATE H WHITE BALANCE COLOR TEMP. (WHEN k SELECTED) Shortcuts The quick menu shows the options currently selected for items B–H, which can be changed. 9 246 The Quick Menu Viewing and Changing Settings 1 Press Q to display the quick menu during shooting. 2 Use the focus stick (focus lever) to highlight items and rotate the rear command dial to change. FOCUS MODE SET END N When DISABLE is selected for H IMAGE QUALITY SETTING > 3 Press Q to exit when settings are complete. N • The quick menu can also be edited using touch controls. • Using D BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING, you can assign the Q button roles normally reserved for the function buttons or assign the Q button’s default role to a function button (P 251). • To disable the Q (quick menu) button, select NONE for D BUTTON/ DIAL SETTING > FUNCTION (Fn) SETTING > Q BUTTON SETTING. 247 Shortcuts EDIT/SAVE CUSTOM SETTING > AUTO UPDATE SETTING in modes C1 through C4, settings altered from saved values are indicated by red icons. 9 Editing the Quick Menu To choose the items displayed in the quick menu: 1 Press and hold the Q button during shooting. N Whether the camera displays the photo or movie quick menu depends on the position of the mode dial. 2 The current quick menu will be displayed; use the focus stick (focus lever) to highlight the item you wish to change and press MENU/OK. 3 Highlight the item you wish to change and press MENU/OK. The following can be assigned to the quick menu. N The quick menus can also be edited using D BUTTON/DIAL SETTING > x EDIT/SAVE QUICK MENU or F EDIT/SAVE QUICK MENU. Shortcuts 9 248 The Quick Menu Available Items (Still Photography) Choose from: N To disable the function button, choose NONE. Shortcuts • IMAGE SIZE • TOUCH SCREEN MODE • IMAGE QUALITY • SELF-TIMER • FILM SIMULATION • PHOTOMETRY • GRAIN EFFECT • SHUTTER TYPE • COLOR CHROME EFFECT • FLICKER REDUCTION • COLOR CHROME FX BLUE • ISO • DYNAMIC RANGE • FLASH FUNCTION SETTING • D RANGE PRIORITY • FLASH COMPENSATION • WHITE BALANCE • MOVIE MODE RESOLUTION/ASPECT • WHITE BALANCE COLOR TEMP. (WHEN RATIO k SELECTED) • MOVIE MODE FRAME RATE • HIGHLIGHT TONE • MOVIE MODE BIT RATE • SHADOW TONE • FULL HD HIGH SPEED REC • COLOR • F IS MODE • SHARPNESS • F IS MODE BOOST • CLARITY • INTERNAL/EXTERNAL MIC LEVEL ADJUSTMENT • HIGH ISO NR • FOCUS MODE • SOUND & FLASH • AF MODE • EVF/LCD BRIGHTNESS • AF-C CUSTOM SETTINGS • EVF/LCD COLOR • FACE/EYE DETECTION SETTING • NONE • MF ASSIST 9 249 The Quick Menu Available Items (Movies) • FILM SIMULATION • DYNAMIC RANGE • WHITE BALANCE • WHITE BALANCE COLOR TEMP. (WHEN k SELECTED) • HIGHLIGHT TONE • SHADOW TONE • COLOR • SHARPNESS • HIGH ISO NR • FACE/EYE DETECTION SETTING • MF ASSIST • TOUCH SCREEN MODE • PHOTOMETRY • ISO • MOVIE MODE RESOLUTION/ ASPECT RATIO • MOVIE MODE FRAME RATE • MOVIE MODE BIT RATE • FULL HD HIGH SPEED REC • FOCUS MODE • MOVIE AF MODE • FIX MOVIE CROP MAGNIFICATION C • F IS MODE • F IS MODE BOOST • SHUTTER SPEED • APERTURE (MOVIE OPTIMIZED CONTROL oL) • INTERNAL/EXTERNAL MIC LEVEL ADJUSTMENT • SOUND & FLASH • EVF/LCD BRIGHTNESS • EVF/LCD COLOR • NONE N To disable the function button, choose NONE. Shortcuts 9 250 Function Controls Each of the function (Fn, t, ISO, Q, AEL, and AFON) buttons, the Fn (function) dial, and touch-function (T-Fn1, T-Fn2, T-Fn3, and T-Fn4) buttons flick gestures can be assigned its own role. The Function Buttons Assign roles to the function (Fn, t, ISO, Q, AEL, and AFON) buttons for quick access. Function Button Defaults The default assignments are: Shortcuts Function buttons A B C D E F Fn button ISO button t (movie recording) button Q (quick menu) button AFON button AEL (exposure lock) button 9 Default WHITE BALANCE ISO MOVIE RECORDING RELEASE QUICK MENU AF-ON AE LOCK ONLY 251 Assigning Roles to the Function Buttons The roles played by the function buttons can be selected using the D BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING option in the setup menu. Shortcuts 9 • IMAGE SIZE • IMAGE QUALITY • RAW • FILM SIMULATION • GRAIN EFFECT • COLOR CHROME EFFECT • COLOR CHROME FX BLUE • DYNAMIC RANGE • D RANGE PRIORITY • WHITE BALANCE • CLARITY • FOCUS AREA • FOCUS CHECK • FOCUS MODE • AF MODE • AF-C CUSTOM SETTINGS • FACE DETECTION ON/OFF • AF RANGE LIMITER • FOCUS CHECK LOCK • SPORTS FINDER MODE • PRE-SHOT sJ • SELF-TIMER • AE BKT SETTING • FOCUS BKT SETTING • PHOTOMETRY • SHUTTER TYPE • FLICKER REDUCTION • ISO • IS MODE • WIRELESS COMMUNICATION • FLASH COMPENSATION • FLASH FUNCTION SETTING • TTL-LOCK • MODELING FLASH • MOVIE RECORDING RELEASE • FULL HD HIGH SPEED REC • FIX MOVIE CROP MAGNIFICATION C • F IS MODE BOOST • ZEBRA SETTING • INTERNAL/EXTERNAL MIC LEVEL ADJUSTMENT • MOVIE OPTIMIZED CONTROL oL • VIEW MODE SETTING • PREVIEW DEPTH OF FIELD • PREVIEW EXP./WB IN MANUAL MODE • NATURAL LIVE VIEW • HISTOGRAM • ELECTRONIC LEVEL • LARGE INDICATORS MODE • F-Log VIEW ASSIST • AE LOCK ONLY • AF LOCK ONLY • AE/AF LOCK • AF-ON • AWB LOCK ONLY • PERFORMANCE • AUTO IMAGE TRANSFER • SELECT PAIRING DESTINATION • Bluetooth ON/OFF • QUICK MENU • PLAYBACK • NONE N To disable the function button, choose NONE. 252 Function Controls AF-ON Controls to which AF-ON is assigned can be used for autofocus. MODELING FLASH If MODELING FLASH is selected when a compatible shoe-mounted flash unit is attached, you can press the control to test-fire the flash and check for shadows and the like (modeling flash). TTL-LOCK If TTL-LOCK is selected, you can press the control to lock flash output according to the option selected for F FLASH SETTING > TTL-LOCK MODE (P 149). Shortcuts 9 253 The Function Dial Rotate the Fn (function) dial for direct access to selected features. The role played by the function dial can be selected using D BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING. Shortcuts 9 • EXPO. COMP. • SELF-TIMER • IMAGE SIZE • PHOTOMETRY • IMAGE QUALITY • SHUTTER TYPE • FILM SIMULATION • FLICKER REDUCTION • GRAIN EFFECT • ISO • COLOR CHROME EFFECT • IS MODE • COLOR CHROME FX BLUE • FLASH COMPENSATION • DYNAMIC RANGE • FLASH FUNCTION SETTING • D RANGE PRIORITY • FULL HD HIGH SPEED REC • WHITE BALANCE • FIX MOVIE CROP MAGNIFICATION C • CLARITY • F IS MODE BOOST • FOCUS MODE • ZEBRA SETTING • AF MODE • INTERNAL/EXTERNAL MIC LEVEL ADJUSTMENT • AF-C CUSTOM SETTINGS • FACE DETECTION ON/OFF • MOVIE OPTIMIZED CONTROL oL • AF RANGE LIMITER • DEFAULT • SPORTS FINDER MODE • DEFAULT (d WHEN SET TO B) • PRE-SHOT sJ • NONE N • To disable the function dial, select NONE. • If DEFAULT is selected, the role played by the function dial will be tailored to the mode currently chosen with the mode dial (P 7). • If DEFAULT (d WHEN SET TO B) is selected, the control will be assigned EXPO. COMP. instead of FILM SIMULATION in mode M (manual). 254 Function Controls Touch-Function Gestures Assign roles to touch-function gestures (T-Fn1, T-Fn2, T-Fn3, or T-Fn4) for quick access to selected features. N Touch-function gestures are disabled by default. To enable touch-func- tion gestures, select ON for D BUTTON/DIAL SETTING > TOUCH SCREEN SETTING > c TOUCH FUNCTION. Touch-Function Gesture Defaults The default assignments for the different gestures are: Touch-Function Gestures T-Fn1 (flick up) T-Fn2 (flick left) T-Fn3 (flick right) T-Fn4 (flick down) Default HISTOGRAM SPORTS FINDER MODE LARGE INDICATORS MODE ELECTRONIC LEVEL Shortcuts A B C D 9 255 Function Controls Assigning Roles to Touch-Function Gestures The roles played by touch-function gestures can be selected using the D BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING option in the setup menu. Shortcuts 9 • IMAGE SIZE • IMAGE QUALITY • RAW • FILM SIMULATION • GRAIN EFFECT • COLOR CHROME EFFECT • COLOR CHROME FX BLUE • DYNAMIC RANGE • D RANGE PRIORITY • WHITE BALANCE • CLARITY • FOCUS AREA • FOCUS CHECK • FOCUS MODE • AF MODE • AF-C CUSTOM SETTINGS • FACE DETECTION ON/OFF • AF RANGE LIMITER • FOCUS CHECK LOCK • SPORTS FINDER MODE • PRE-SHOT sJ • SELF-TIMER • AE BKT SETTING • FOCUS BKT SETTING • PHOTOMETRY • SHUTTER TYPE • FLICKER REDUCTION • ISO • IS MODE • WIRELESS COMMUNICATION • FLASH COMPENSATION • FLASH FUNCTION SETTING • TTL-LOCK • MODELING FLASH • FULL HD HIGH SPEED REC • FIX MOVIE CROP MAGNIFICATION C • F IS MODE BOOST • ZEBRA SETTING • INTERNAL/EXTERNAL MIC LEVEL ADJUSTMENT • MOVIE OPTIMIZED CONTROL oL • VIEW MODE SETTING • PREVIEW DEPTH OF FIELD • PREVIEW EXP./WB IN MANUAL MODE • NATURAL LIVE VIEW • HISTOGRAM • ELECTRONIC LEVEL • LARGE INDICATORS MODE • F-Log VIEW ASSIST • PERFORMANCE • AUTO IMAGE TRANSFER • SELECT PAIRING DESTINATION • Bluetooth ON/OFF • QUICK MENU • PLAYBACK • NONE N To disable touch-function gestures, choose NONE. 256 Peripherals and Optional Accessories 257 Lenses The camera can be used with lenses for the FUJIFILM X-mount. Lens Parts Peripherals and Optional Accessories A Lens hood B Mounting marks C Focus ring D Zoom ring E Aperture ring F O.I.S. switch G Aperture mode switch H Lens signal contacts I Front lens cap J Rear lens cap N A XF18-55mmF2.8-4 R LM OIS lens is used here for illustrative purposes. 10 258 Lenses Removing Lens Caps Remove lens caps as shown. O Lens caps may differ from those shown. Peripherals and Optional Accessories Attaching Lens Hoods When attached, lens hoods reduce glare and protect the front lens element. 10 259 Lenses with Aperture Rings At settings other than A, you can adjust aperture by rotating the lens aperture ring (exposure modes A and M). A 16 11 8 5.6 4 2.8 A 16 11 8 5.6 4 Aperture ring N • Selecting ON for MOVIE OPTIMIZED CONTROL oL disables the aperture ring. • When the aperture ring is set to A, rotate the command dials to adjust aperture. The Aperture Mode Switch If the lens has an aperture mode switch, aperture can be adjusted manually by sliding the switch to Z and rotating the aperture ring. Peripherals and Optional Accessories Aperture ring Aperture mode switch 10 260 Lenses Lenses with O.I.S. Switches If the lens supports optical image stabilization (O.I.S.), the image stabilization mode can be chosen in the camera menus. To activate image stabilization, slide the O.I.S. switch to ON. O.I.S. switch Peripherals and Optional Accessories 10 261 Manual Focus Lenses Slide the focus ring to the front for autofocus. For manual focus, slide the focus ring to the back and rotate it while checking the results in the camera display. The focus distance and depth-of-field indicators can be used to assist manual focus. O Note that manual focus may not be available in all shooting modes. Peripherals and Optional Accessories The Depth-of-Field Indicator The depth-of-field indicator shows the approximate depth of field (the distance in front of and behind the focus point that appears to be in focus). The indicator is displayed in film format. 10 262 Lenses Lens Care • Use a blower to remove dust, then gently wipe with a soft, dry cloth. Any remaining stains can be removed by wiping gently with a piece of Fujifilm lens-cleaning paper to which a small amount of lens-cleaning fluid has been applied. • Replace the front and rear caps when the lens is not in use. Peripherals and Optional Accessories 10 263 External Flash Units Use optional external flash units for flash photography. Some units support high-speed sync (FP) and can be used at shutter speeds faster than the flash sync speed, while others can function as commanders controlling remote units via optical wireless flash control. O You may be unable to test-fire the flash in some circumstances, for example when camera menus are displayed. Red-Eye Removal Red-eye removal is available when an option other than OFF is selected for F FLASH SETTING > RED EYE REMOVAL and G AF/MF SETTING > FACE/EYE DETECTION SETTING is FACE DETECTION ON. Red-eye removal minimizes “red-eye” caused when light from the flash is reflected from the subject’s retinas. Peripherals and Optional Accessories Flash Sync Speed The flash will synchronize with the shutter at shutter speeds of 1⁄180 s or slower. Optional Flash Units from Fujifilm The camera can be used with optional Fujifilm shoe-mounted flash units. Third-Party Flash Units Do not use third-party flash units that apply over 300 V to the camera hot shoe. 10 264 External Flash Units Using an External Flash 1 2 Connect the unit to the camera. In shooting mode, select FLASH FUNCTION SETTING in the F (FLASH SETTING) menu tab. The options available vary with the flash unit. FLASH SETTING FLASH FUNCTION SETTING RED EYE REMOVAL TTL-LOCK MODE LED LIGHT SETTING COMMANDER SETTING CH SETTING EXIT 3 Highlight items using the focus stick (focus lever) and rotate the rear command dial to change the highlighted setting. 266 267 270 MODE Built-In Flash ADJUST 4 P 101 END Press DISP/BACK to put the changes into effect. Peripherals and Optional Accessories Menu Description Built-In Flash Displayed when the built-in flash is raised. Sync terminal options will be displayed if the built-in flash SYNC is lowered and either no flash unit, or an incompatible TERMINAL flash unit, is mounted on the hot shoe. SHOE MOUNT Displayed when an optional flash unit other than the FLASH EF-X8 is mounted on the hot shoe and turned on. Displayed if an optional flash unit functioning as a comCOMMANDER mander for Fujifilm optical wireless remote flash control is (OPTICAL) connected and turned on. 10 265 SYNC TERMINAL SYNC TERMINAL is displayed if the built-in flash is lowered and either no flash unit, or an incompatible flash unit, is mounted on the hot shoe. MODE SYNC TERMINAL ADJUST Setting END Peripherals and Optional Accessories Description Choose from the following options: • M: A trigger signal is transmitted via the hot shoe X contacts when a picture is taken. Choose a shutter speed slower than A Flash control mode the sync speed; even slower speeds may be required if the unit uses long flashes or has a slow response time. • D (OFF): The trigger signal is disabled. Choose whether the flash is timed to fire immediately after the shutter opens (H/1ST CURTAIN) or immediately before B Sync it closes (I/2ND CURTAIN). 1ST CURTAIN is recommended in most circumstances. 10 266 External Flash Units SHOE MOUNT FLASH The following options are available when an optional shoe-mounted flash unit is attached and turned on. MODE SHOE MOUNT FLASH ADJUST END Setting Peripherals and Optional Accessories Description The flash control mode selected with the flash unit. This can in some cases be adjusted from the camera; the options available vary with the flash. • TTL: TTL mode. Adjust flash compensation (B). • M: The flash fires at the selected output regardless of subject A Flash control mode brightness or camera settings. Output in some cases can be adjusted from the camera (B). • MULTI: Repeating flash. Compatible shoe-mounted flash units will fire multiple times with each shot. • D (OFF): The flash does not fire. Some flash units can be turned off from the camera. 10 267 Setting Peripherals and Optional Accessories Description The options available vary with flash control mode. • TTL: Adjust flash compensation (the full value may not be applied if the limits of the flash control system are exceeded). In the cases of the EF-X20, EF-20, and EF-42, the selected value is added to the value selected with the flash unit. B Flash compensation/ • M/MULTI: Adjust flash output (compatible units only). output Choose from values expressed as fractions of full power, from ⁄ (mode M) or ¼ (MULTI) down to ⁄ in increments equivalent to ⁄ EV. The desired results may not be achieved at low values if they exceed the limits of the flash control system; take a test shot and check the results. Choose a flash mode for TTL flash control. The options available vary with the shooting mode (P, S, A, or M) selected. • E (FLASH AUTO): The flash fires only as required; flash level is adjusted according to subject brightness. A p icon displayed when the shutter button is pressed halfway indicates that the flash will fire when the photo is taken. F (STANDARD): The flash fires with every shot if possible; • C Flash mode (TTL) flash level is adjusted according to subject brightness. The flash will not fire if not fully charged when the shutter is released. • G (SLOW SYNC.): Combine the flash with slow shutter speeds when photographing portrait subjects against a backdrop of night scenery. The flash will not fire if not fully charged when the shutter is released. 10 268 External Flash Units Setting D Sync E Zoom G LED light G Number of flashes * H Frequency * Peripherals and Optional Accessories F Lighting Description Control flash timing. • H (1ST CURTAIN): The flash fires immediately after the shutter opens (generally the best choice). • I (2ND CURTAIN): The flash fires immediately before the shutter closes. • R (AUTO FP(HSS)): High-speed sync (compatible units only). The camera automatically engages front-curtain highspeed sync at shutter speeds faster than the flash sync speed. Equivalent to 1ST CURTAIN when MULTI is selected for flash control mode. The angle of illumination (flash coverage) for units that support flash zoom. Some units allow the adjustment to be made from the camera. If AUTO is selected, zoom will automatically be adjusted to match coverage to lens focal length. If the unit supports this feature, choose from: • J (FLASH POWER PRIORITY): Gain range by slightly reducing coverage. • K (STANDARD): Match coverage to picture angle. • L (EVEN COVERAGE PRIORITY): Slightly increase coverage for more even lighting. Choose how the built-in LED light functions during still photography (compatible units only): as a catchlight (M/CATCHLIGHT), as an AF-assist illuminator (N/AF ASSIST), or as both a catchlight and an AF-assist illuminator (O/AF ASSIST+CATCHLIGHT). Choose OFF to disable the LED during photography. Choose the number of times the flash fires each time the shutter is released in MULTI mode. Choose the frequency at which the flash fires in MULTI mode. * Full value may not be applied if limits of flash control system are exceeded. 10 269 COMMANDER(OPTICAL) The options will be displayed if the unit is currently functioning as a commander for Fujifilm optical wireless remote flash control. MODE COMMANDER(OPTICAL) ADJUST END Peripherals and Optional Accessories Fujifilm optical wireless remote flash control offers a choice of four channels (Channels 1 through 4) for the exchange of optical signals between the commander and remote flash units. Separate channels can be used for different flash systems or to prevent interference when multiple systems are operating in close proximity. The flash units can also be placed in up to three groups (A, B, and C) and flash mode C and flash level adjusted separately for A each group. B 10 270 External Flash Units Setting A Flash control mode (group A) B Flash control mode (group B) C Flash control mode (group C) output (group A) E Flash compensation/ output (group B) F Flash compensation/ output (group C) Peripherals and Optional Accessories D Flash compensation/ Description Choose flash control modes for groups A, B, and C. TTL% is available for groups A and B only. • TTL: The units in the group fire in TTL mode. Flash compensation can be adjusted separately for each group. • TTL%: If TTL% is selected for either group A or B, you can specify the output of the selected group as a percentage of the other and adjust overall flash compensation for both groups. • M: In mode M, the units in the group fire at the selected output (expressed as a fraction of full power) regardless of subject brightness or camera settings. • MULTI: Choosing MULTI for any group sets all the units in all groups to repeating flash mode. All units will fire multiple times with each shot. • D (OFF): If OFF is selected, the units in the group will not fire. Adjust flash level for the selected group according to option selected for flash control mode. Note that the full value may not be applied if the limits of the flash control system are exceeded. • TTL: Adjust flash compensation. • M/MULTI: Adjust flash output. • TTL%: Choose the balance between groups A and B and adjust overall flash compensation. 10 271 Setting G Flash mode (TTL) Peripherals and Optional Accessories H Sync I Zoom 10 J Lighting 272 Description Choose a flash mode for TTL flash control. The options available vary with the shooting mode (P, S, A, or M) selected. • E (FLASH AUTO): The flash fires only as required; flash level is adjusted according to subject brightness. A p icon displayed when the shutter button is pressed halfway indicates that the flash will fire when the photo is taken. • F (STANDARD): The flash fires with every shot if possible; flash level is adjusted according to subject brightness. The flash will not fire if not fully charged when the shutter is released. • G (SLOW SYNC.): Combine the flash with slow shutter speeds when photographing portrait subjects against a backdrop of night scenery. The flash will not fire if not fully charged when the shutter is released. Control flash timing. • H (1ST CURTAIN): The flash fires immediately after the shutter opens (generally the best choice). • I (2ND CURTAIN): The flash fires immediately before the shutter closes. • R (AUTO FP(HSS)): High-speed sync (compatible units only). The camera automatically engages front-curtain highspeed sync at shutter speeds faster than the flash sync speed. Equivalent to 1ST CURTAIN when MULTI is selected for flash control mode. The angle of illumination (flash coverage) for units that support flash zoom. Some units allow the adjustment to be made from the camera. If AUTO is selected, zoom will automatically be adjusted to match coverage to lens focal length. If the unit supports this feature, choose from: • J (FLASH POWER PRIORITY): Gain range by slightly reducing coverage. • K (STANDARD): Match coverage to picture angle. • L (EVEN COVERAGE PRIORITY): Slightly increase coverage for more even lighting. External Flash Units Setting K Commander K Number of flashes L Channel Peripherals and Optional Accessories L Frequency Description Choose the group for units functioning as a commander for Fujifilm optical wireless remote flash control in TTL, TTL%, or M mode. This option is available only with clipon flash units that support Fujifilm optical wireless remote flash control. • Gr A: Assign the commander to group A. • Gr B: Assign the commander to group B. • Gr C: Assign the commander to group C. • OFF: Output from the commander is held to a level that does not affect the final picture. Choose the number of times the flash fires each time the shutter is released in MULTI mode. Choose the channel used by the commander for communication with the remote flash units. Separate channels can be used for different flash systems or to prevent interference when multiple systems are operating in close proximity. Choose the frequency at which the flash fires in MULTI mode. 10 273 MEMO 274 Connections 275 HDMI Output Camera shooting and playback displays can be output to HDMI devices. Connecting to HDMI Devices Connect the camera to TVs or other HDMI devices using a third-party HDMI cable. 1 2 Turn the camera off. Connect the cable as shown below. Insert into HDMI connector Insert into HDMI Micro connector (Type D) Connections 11 3 Configure the device for HDMI input as described in the documentation supplied with the device. 4 Turn the camera on. The contents of the camera display will be shown on the HDMI device. The camera display turns off in playback mode (P 277). O • Making sure the connectors are fully inserted. • Use an HDMI cable no more than 1.5 m (4.9 ft.) long. 276 HDMI Output Shooting Shoot photos and record movies while viewing the scene through the camera lens on or saving footage to the HDMI device. N This feature can be used to save 4K and Full HD movies to an HDMI recorder. Playback To start playback, press the camera a button. The camera monitor turns off and pictures and movies are output to the HDMI device. Note that the camera volume controls have no effect on sounds played on the TV; use the television volume controls to adjust the volume. O Some televisions may briefly display a black screen when movie playback begins. Connections 11 277 Wireless Connections (Bluetooth®, Wireless LAN/Wi-Fi) Access wireless networks and connect to computers, smartphones, or tablets. For more information, visit: http://fujifilm-dsc.com/wifi/ N In the text that follows, the term “smartphone” is used to refer to both smartphones and tablets. Smartphones and Tablets: FUJIFILM Camera Remote Connect to the camera via Bluetooth or wireless LAN. N To establish a wireless connection to the camera, you will need to in- stall the latest version of the FUJIFILM Camera Remote app on your smartphone or tablet. FUJIFILM Camera Remote Once a connection has been established, you can use FUJIFILM Camera Remote to: • Control the camera and take pictures remotely • Receive pictures uploaded from the camera • Browse the pictures on the camera and download selected pictures • Upload location data to the camera • Release the camera shutter • Update camera firmware For downloads and other information, visit: http://app.fujifilm-dsc.com/en/camera_remote/ Connections 11 278 Wireless Connections (Bluetooth®, Wireless LAN/Wi-Fi) SmartPhones and Tablets: Bluetooth® Pairing Use D CONNECTION SETTING > Bluetooth SETTINGS > PAIRING REGISTRATION to pair the camera with smartphones or tablets. Pairing offers a simple method for downloading photos from the camera. N • Photos are downloaded via a wireless connection. • Once pairing is complete, you will be able to synchronize the camera clock and location data with the smartphone or tablet (P 234). • You can choose a connection from up to 7 paired smartphones or tablets. Smartphones and Tablets: Wireless LAN Establish wireless LAN connections to smartphones or tablets using WIRELESS COMMUNICATION in the A SHOOTING SETTING, B MOVIE SETTING, or C PLAY BACK MENU. Connections 11 279 Wireless Connections (Bluetooth®, Wireless LAN/Wi-Fi) Copying Pictures to a Computer: PC AutoSave Install the latest version of FUJIFILM PC Autosave to your computer to upload pictures from the camera over wireless networks (Wi-Fi). FUJIFILM PC AutoSave For downloads and other information, visit: http://app.fujifilm-dsc.com/en/pc_autosave/ Computers: Wireless Connections You can upload pictures from the camera using the PC AUTO SAVE option in the playback menu. Connections 11 280 Connecting via USB The camera can be connected to computers and smartphones via USB. Connecting to Computers N Before downloading pictures or taking pictures remotely, connect the camera to a computer and check that it functions normally. 1 2 Turn the computer on. 3 4 Turn the camera off. Adjust settings according to whether you will be copying pictures to a computer (P 284), save RAW pictures in other formats (P 285), or Saving and Loading Camera Settings (P 285). Connect a USB cable. O The USB cable must be no more than 1.5 m (4.9 ft.) long and be suitable for data transfer. Connections USB connector (Type-C) 11 281 5 6 Turn the camera on. Copy pictures to your computer. • Image transfer: Use applications provided with your operating system. • RAW conversion: Process RAW images using FUJIFILM X RAW STUDIO. The power of the camera’s image processing engine is used for rapid processing. • Saving and loading camera settings: Use FUJIFILM X Acquire to save or load camera settings. Save your preferred settings to a file in a single operation and copy them to multiple cameras. Connections 11 282 Connecting via USB O • Turn the camera off before disconnecting the USB cable. • When connecting USB cables, be sure the connectors are fully in- serted in the correct orientation. Connect the camera directly to the computer; do not use a USB hub or keyboard. • Loss of power during transfer could result in loss of data or damage to the memory card. Insert a fresh or fully-charged battery before connecting the camera. • If a memory card containing a large number of images is inserted, there may be a delay before the software starts and you may be unable to import or save images. Use a memory card reader to transfer pictures. • Make sure that the indicator lamp is off or lit green before disconnecting the camera. • Do not disconnect the USB cable while transfer is in progress. Failure to observe this precaution could result in loss of data or damage to the memory card. • Disconnect the camera before inserting or removing memory cards. • In some cases, it may not be possible to access pictures saved to a network server using the software in the same way as on a standalone computer. • Do not immediately remove the camera from the system or disconnect the USB cable once the message stating that copying is in progress clears from the computer display. If the number of images copied is very large, data transfer may continue after the message has ceased to be displayed. • The user bears all applicable fees charged by the phone company or Internet service provider when using services that require an Internet connection. Connections 11 283 Copying Pictures to a Computer • Before copying pictures to a computer, select USB CARD READER for D CONNECTION SETTING > CONNECTION MODE. • The software that can be used to copy pictures varies with your computer operating system. CONNECTION SETTING CARD READER BluetoothUSB SETTINGS WEBCAM PC AUTOXSAVE USB RAW CONV./BACKUPSETTING RESTORE PRINTER CONNECTION CONNECTION MODE USB POWER SUPPLY SETTING GENERAL SETTINGS INFORMATION RESET WIRELESS SETTING EXIT Mac OS X/macOS Pictures can be copied to your computer using Image Capture (supplied with your computer) or other software. O Use a card reader to copy files over 4 GB in size. Windows Pictures can be copied to your computer using applications supplied with the operating system. Connections 11 284 Connecting via USB Converting RAW Images: FUJIFILM X RAW STUDIO • Before proceeding, select USB RAW Bluetooth SETTINGS PC AUTO SAVE CONV./BACKUP RESTORE for D CONPRINTER CONNECTION SETTING CONNECTION MODE NECTION SETTING > CONNECTION USB POWER SUPPLY SETTING GENERAL SETTINGS MODE in the camera menus. INFORMATION RESET WIRELESS SETTING • FUJIFILM X RAW STUDIO can be used to convert RAW images to JPEG or TIFF images. CONNECTION SETTING USB CARD READER X WEBCAM USB RAW CONV./BACKUP RESTORE EXIT N For more information on FUJIFILM X RAW STUDIO, see “Software for Use with Your Camera” (P 294). Backing up and Restoring Camera Settings (FUJIFILM X Acquire) • Before proceeding, select USB RAW CONV./BACKUP RESTORE for D CONNECTION SETTING > CONNECTION MODE in the camera menus. • FUJIFILM X Acquire can be used to backup and restore camera settings. CONNECTION SETTING CARD READER BluetoothUSB SETTINGS WEBCAM PC AUTOXSAVE USB RAW CONV./BACKUPSETTING RESTORE PRINTER CONNECTION CONNECTION MODE USB POWER SUPPLY SETTING GENERAL SETTINGS INFORMATION RESET WIRELESS SETTING EXIT N For more information on FUJIFILM X Acquire, see “Software for Use with Your Camera” (P 294). Connections 11 285 Connecting to Smartphones To copy pictures to a smartphone, select OFF for D CONNECTION SETTING > USB POWER SUPPLY SETTING and connect the camera to the phone using a USB cable. For Customers Using Android Devices How you will connect the camera depends on the type of USB connector with which your smartphone is equipped. Type-C Ready a cable equipped with connectors matching the USB (Type-C) connector on the camera. Third-party USB cable Type-C connector (male) Type-C connector (male) Micro-B Use a USB on-the-go (OTG) cable. Supplied USB cable USB OTG cable Connections Type-C connector (male) Type-A connector (male) 11 O • The smartphone must support USB OTG. • The Micro-B connector (male) Type-A connector (female) desired results cannot be achieved with a USB Type-C–to– Mirco-B cable. Use an OTG cable. 286 Connecting via USB 1 Set the camera’s D CONNECTION SETTING > USB POWER SUPPLY SETTING to OFF. 2 Connect the camera and smartphone using a USB cable. N If the smartphone asks for permission for an application other than the “Camera Importer” to access the camera, tap “Cancel” and move on to the next step. 3 On your smartphone, tap the notification “Connected to USB PTP”. 4 From the recommended applications, select “Camera Importer”. The app will automatically start and allow you to import photos and movies to your smartphone. N If the message “There is no MTP device connected” appears on the app, please try again from step 2. Connections 11 287 Connecting via USB For Customers Using iOS An Apple Lightning to USB Camera Adapter is required. Supplied USB cable Type-C connector (male) Apple Lightning to USB Camera Adapter Use an Apple Lightning to USB Camera Adapter Type-A connector (male) 1 Set the camera’s D CONNECTION SETTING > USB POWER SUPPLY SETTING to OFF. 2 Connect the camera and smartphone using a USB cable. The “Photos” app will automatically start and allow you to import photos and movies to your smartphone. O The desired results cannot be achieved with a USB Type-C–to– Lightning cable. Use a camera adapter. Connections 11 288 instax SHARE Printers Print pictures from your digital camera to instax SHARE printers. Establishing a Connection Select D CONNECTION SETTING > instax PRINTER CONNECTION SETTING and enter the instax SHARE printer name (SSID) and password. The Printer Name (SSID) and Password The printer name (SSID) can be found on the bottom of the printer; the default password is “1111”. If you have already chosen a different password to print from a smartphone, enter that password instead. Connections 11 289 instax SHARE Printers Printing Pictures 1 Turn the printer on. 2 Select C PLAY BACK MENU > instax PRINTER PRINT. The camera will connect to the printer. PRINTER PRINT instax-12345678 CONNECTING FUJIFILM-CAMERA-1234 CANCEL 3 Use the focus stick (focus lever) to display the picture you want to print, then press MENU/OK. PRINTER PRINT 100-0020 SET instax-12345678 CANCEL N • Pictures taken with other cameras cannot be printed. • The area printed is smaller than the area visible in the LCD monitor. • The displays may vary depending on the printer connected. 4 The picture will be sent to the printer and printing will start. Connections 11 290 Technical Notes 291 Accessories from Fujifilm The following optional accessories are available from Fujifilm. For the latest information on the accessories available in your region, check with your local Fujifilm representative or visit https://fujifilm-x.com/support/compatibility/cameras/. Rechargeable Li-ion batteries NP-W126S: Additional high-capacity NP-W126S rechargeable batteries can be purchased as required. Battery chargers BC-W126S: Replacement battery chargers can be purchased as required. At +20 °C/+68 °F, the BC-W126S charges an NP-W126S in about 150 minutes. AC power adapters AC-9V (requires CP-W126 DC coupler): Use this 100–240 V, 50/60 Hz AC power adapter for extended shooting and playback or when copying pictures to a computer. DC couplers CP-W126: For extended shooting or playback or when using the camera with a computer, use the CP-W126 to connect the camera to the AC-9V power adapter. Remote releases RR-100: Use to reduce camera shake or keep the shutter open during a time exposure. The RR-100 has a connector with a diameter of 2.5 mm; a third-party ⌀2.5 mm to 3.5 mm adapter is required for connection to the camera. Stereo microphones MIC-ST1: An external microphone for movie recording. Technical Notes 12 FUJINON lenses XF-/XC-series lenses: Interchangeable lenses for use exclusively with the FUJIFILM X-mount. FUJINON MKX-series lenses: Cinema lenses for the FUJIFILM X-mount. Macro extension tubes MCEX-11/16: Attach between the camera and the lens to shoot at high reproduction ratios. Teleconverters XF1.4X TC WR: Increases the focal length of the compatible lenses by about 1.4×. XF2X TC WR: Increases the focal length of the compatible lenses by about 2.0×. 292 Accessories from Fujifilm Mount adapters FUJIFILM M MOUNT ADAPTER: Allows the camera to be used with a wide selection of M-mount lenses. Body caps BCP-001: Cover the camera lens mount when no lens is attached. Shoe-mounted flash units EF-X500: In addition to manual and TTL flash control, this clip-on flash unit has a Guide Number of 50/164 (ISO 100, m/ft.) and supports FP (high-speed sync), allowing it to be used at shutter speeds that exceed the flash sync speed. Featuring support for the optional EF-BP1 battery pack and Fujifilm optical wireless flash control, it can be used as a commander or remote flash unit for remote wireless flash photography. EF-BP1: A battery pack for EF-X500 flash units. Takes up to 8 AA batteries. EF-60: In addition to manual and TTL flash control, this clip-on flash unit has a Guide Number of 60/197 (ISO 100, m/ft.) and supports FP (high-speed sync), allowing it to be used at shutter speeds that exceed the flash sync speed. It can also be used as remote flash under the control of an optional EF-W1 wireless commander. EF-42: This clip-on flash unit has a Guide Number of 42/137 (ISO 100, m/ft.) and supports manual and TTL flash control. EF-X20: This clip-on flash unit has a Guide Number of 20/65 (ISO 100, m/ft.) and supports manual and TTL flash control. EF-20: This clip-on flash unit has a Guide Number of 20/65 (ISO 100, m/ft.) and supports TTL flash control (manual flash control is not supported). EF-W1: With support for the NAS * wireless communication standard developed by Nissin Japan, this wireless flash commander can be used with optional EF-60 clip-on flash units and other NAS-compliant units. * NAS is a registered trademark of Nissin Japan Ltd. Technical Notes Grip belts GB-001: Improves grip. Combine with a hand grip for more secure handling. instax SHARE printers SP-1/SP-2/SP-3: Connect via wireless LAN to print pictures on instax film. 12 293 Software for Use with Your Camera The camera can be used with the following software. For the latest information on software available from Fujifilm, visit https://fujifilm-x.com/support/compatibility/cameras/. FUJIFILM Camera Remote Establish a wireless connection between your camera and a smartphone or tablet (P 278). http://app.fujifilm-dsc.com/en/camera_remote/ FUJIFILM PC AutoSave Download pictures from your camera over wireless networks (P 280). http://app.fujifilm-dsc.com/en/pc_autosave/ RAW FILE CONVERTER EX powered by SILKYPIX RAW FILE CONVERTER EX powered by SILKYPIX is RAW conversion software from Ichikawa Soft Laboratory Co., Ltd. View RAW pictures on your computer and convert them into other formats. RAW FILE CONVERTER EX powered by SILKYPIX is available free of charge from the Fujifilm website. https://fujifilm-x.com/support/download/software/raw-file-converterex-powered-by-silkypix/ N “RAW FILE CONVERTER EX powered by SILKYPIX” is supplied by Ichikawa Soft Laboratory Co., Ltd. Technical Notes 12 Capture One Express Fujifilm Capture One Express Fujifilm is image edit software from Capture One A/S. View RAW pictures on your computer and convert them into other formats. Capture One Express Fujifilm is available free of charge from Capture One. https://www.captureone.com/products-plans/capture-one-express/fujifilm 294 Software for Use with Your Camera Capture One Pro Fujifilm Capture One Pro Fujifilm is workflow software from Capture One A/S. Capture One Pro Fujifilm supports tethered shooting and the conversion of RAW pictures into other formats. https://www.captureone.com/explore-features/fujifilm FUJIFILM X Acquire This application for Windows and macOS lets you connect to the camera via USB or Wi-Fi and automatically download photos to a specified folder as they are taken, or backup and restore the camera via USB. https://fujifilm-x.com/products/software/x-acquire/ O Auto download (tethered shooting) is not supported with some cameras. FUJIFILM X RAW STUDIO When the camera is connected to a computer via USB, FUJIFILM X RAW STUDIO can use the camera’s unique image processing engine to rapidly convert RAW files to create high-quality images in other formats. https://fujifilm-x.com/products/software/x-raw-studio/ FUJIFILM X Webcam Connect the camera to a computer via USB to turn it into a webcam. https://fujifilm-x.com/products/software/x-webcam/ Technical Notes 12 295 For Your Safety IMPORTANT SAFETY INSTRUCTIONS Instructions: All the safety and operating instructions • Read Instructions should be read before the appliance is operated. Instructions tructions: The safety and operating instructions • Retain Ins should be retained for future reference. Warnings ngs: All warnings on the appliance and in the • Heed Warni operating instructions should be adhered to. structions: All operating and use instructions • Follow InInstructions should be followed. Technical Notes 12 Installation Power Sources: This video product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For video products intended to operate from battery power, or other sources, refer to the operating instructions. Grounding or Polarization: This video product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. Alternate Warnings: This video product is equipped with a three-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding type plug. Overloading: Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. Ventilation: Slots and openings in the cabinet are provided for ventilation, to ensure reliable operation of the video product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the video product on a bed, sofa, rug, or other similar surface. This video product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to. This video product should never be placed near or over a radiator or heat register. Attachments: Do not use attachments not recommended by the video product manufacturer as they may cause hazards. Water and Moisture: Do not use this video product near water—for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. 296 Power-Cord Protection: Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. Accessories: Do not place this video product on an unstable cart, stand, tripod, bracket, or table. The video product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the video product. Any mounting of the appliance should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. Antennas Outdoor Antenna Grounding: If an outside antenna or cable system is connected to the video product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE Ground Clamp Electric Servicee Equipmentt Antenna Lead in Wire AAnntenna Discharge Unit D (NEC N SECTION 8 810-20) Ground Clamps Power Service Grounding Electrode System (NEC ART 250. PART H) Grounding Conductors (NEC SECTION 810-21) For Your Safety Power Lines: An outside antenna system should not be locat- Damage Requiring Service: Unplug this video product from ed in the vicinity of overhead power lines or other electric the wall outlet and refer servicing to qualified service personlight or power circuits, or where it can fall into such power nel under the following conditions: lines or circuits. When installing an outside antenna system, • When the power-supply cord or plug is damaged extreme care should be taken to keep from touching such • If liquid has been spilled, or objects have fallen into the power lines or circuits as contact with them might be fatal. video product. • If the video product has been exposed to rain or water. Use If the video product has been dropped or the cabinet has Cleaning: Unplug this video product from the wall outlet be- • been damaged. fore cleaning. Do not use liquid cleaners or aerosol cleaners. If the video product does not operate normally follow the Use a damp cloth for cleaning. operating instructions. Adjust only those controls that are Object and Liquid Entry: Never push objects of any kind into covered by the operating instructions as an improper adjustthis video product through openings as they may touch dan- ment of other controls may result in damage and will often gerous voltage points or short out parts that could result in require extensive work by a qualified technician to restore a fire or electric shock. Never spill liquid of any kind on the the video product to its normal operation. video product. When the video product exhibits a distinct change in perforLightning: For added protection for this video product re- mance — this indicates a need for service. ceiver during a lightning storm, or when it is left unattended Replacement Parts: When replacement parts are required, be and unused for long periods of time, unplug it from the wall sure the service technician has used replacement parts specoutlet and disconnect the antenna or cable system. This will ified by the manufacturer or have the same characteristics as prevent damage to the video product due to lightning and the original part. Unauthorized substitutions may result in power-line surges. fire, electric shock or other hazards. Service Safety Check: Upon completion of any service or repairs to Servicing: Do not attempt to service this video product this video product, ask the service technician to perform yourself as opening or removing covers may expose you to safety checks to determine that the video product is in propdangerous voltage or other hazards. Refer all servicing to er operating condition. qualified service personnel. Be sure to read these notes before use Safety Notes • Make sure that you use your camera correctly. Read these The symbols on the product (including the accesories) represent the following: safety notes and your Basic Manual carefully before use. AC • After reading these safety notes, store them in a safe place. DC About the Icons The icons shown below are used in this document to indicate the severity of the injury or damage that can result if the information indicated by the icon is ignored and the product is used incorrectly as a result. Class II equipment (The construction of the product is double-insulated.) WARNING This icon indicates that death or serious inWARNING jury can result if the information is ignored. The icons shown below are used to indicate the nature of the instructions which are to be observed. Triangular icons tell you that this information requires attention (“Important”). Circular icons with a diagonal bar tell you that the action indicated is prohibited (“Prohibited”). Filled circles with an exclamation mark indicate an action that must be performed (“Required”). Unplug from power socket Do not allow water or foreign foreign objects to enter the camera or connecting connecting cables. Do not use the camera or connecting cables following ingress of fresh or salt water, milk, beverages, detergents, or other liquids. Should liquid find its way into the camera or connecting cables, turn the camera off, remove the battery, disconnect the USB cable, and disconnect and unplug the AC adapter. Continued use of the camera can cause a fire or electric shock. Contact your Fujifilm dealer. 297 Technical Notes This icon indicates that personal injury or CAUTION material damage can result if the information is ignored. If a problem arises, turn the camera camera off, remove the battery, disconnect the USB cable, and unplug the AC power adapter. Continued use of the camera when it is emitting smoke, is emitting any unusual odor, or is in any other abnormal state can cause a fire or electric shock. Contact your Fujifilm dealer. 12 WARNING Do not use in the bathroom or shower Do not disassemble Do not touch internal parts Technical Notes 12 298 Do not us usee the camera in the bathroom or shower. This can cause a fire or electric shock. Never attempt to change or take apart tthe he camera (never ope openn the case). Failure to observe this precaution can cause fire or electric shock. Should the case break open as the result of a fall or other accident, do not touch the exp exposed osed parts. Failure to observe this precaution could result in electric shock or in injury from touching the damaged parts. Remove the battery immediately, taking care to avoid injury or electric shock, and take the product to the point of purchase for consultation. Do not change change,, heat or unduly twi twist st or pull the connecconnection cord and do no nott place heavy object objectss on the connection cord. These actions could damage the cord and cause a fire or electric shock. If the cord is damaged, contact your Fujifilm dealer. Do not use cables with bent connectors. Do not pplace lace the camera on aann unstable surface. This can cause the camera to fall or tip over and cause injury. Never attempt to take pictures while in motion. Do not use the camera while walking or driving. This can result in you falling down or being involved in a traffic accident. Do not touch any metal parts of the camera during a thunderstorm. thundersto rm. This can cause an electric shock due to induced current from the lightning discharge. Do not use the battery except as specified. Load the battery as shown by the indicator. Do not disassemble, mo modify, dify, or heat batter batteries. ies. Do not drop, st strike, rike, or throw batte batteries ries or otherwise su subject bject them to strong impacts. Do not use batteries that show signs of leaking, deformation, deformation, discoloration, discoloration, or other abnormalities. abno rmalities. Use only designated chargers to recharge rechargeable rechargeable batteries and do do not attempt to recharge non-rechargeable non-rechargeable Li-ion or alkaline alkaline batteries. Do not short batteries or sstore tore them with metallic metallic objects. Failure to observe these precautions could result in the batteries overheating, igniting, rupturing, or leaking, causing fire, burns, or other injury. Use only batteri batteries es or AC power adapt adapters ers specified for usee with this camera. Do not use voltages other than the us power supply voltage show shown. n. The use of other power sources can cause a fire. If the battery battery leaks and fluid uid gets in contact with with your eyes, skin or clothing, flush tthe he affected area wit withh clean water and seek seek medical attention or call an emergenc emergencyy number right away. WARNING Do not use the charger to charge batteries other other than those specifi specified here. The supplied charger is for use only with batteries of the type supplied with the camera. Using the charger to charge conventional batteries or other types of rechargeable batteries can cause the battery to leak, overheat or burst. Using a flash too close to a person’s eyes may cause visual visu al impairment. Take particular care when photographing infants and young children. Do not remain in prolonged contact wi with th hot surfaces. Failure to observe this precaution could result in low-temperature burns, particularly at high ambient temperatures or with users who suffer from poor circulation or reduced sensation, in which case use of a tripod or similar precautions are recommended. Do not leave leave one part of the body in contact wit withh the product for pr prolonged olonged periods while while the product is on. Failure to observe this precaution could result in low-temperature burns, particularly during prolonged use, at high ambient temperatures, or with users who suffer from poor circulation or reduced sensation, in which case use of a tripod or similar precautions are recommended. Do not use in the pre presence sence of flammable oobjects, bjects, explosive gases, gases, or dust. When ccarrying arrying the battery, install it in a dig digital ital camera or keep it in the hard case. When storing the ba battery, ttery, keep it in th thee hard case. When di discarding, scarding, cover the battery terminals with with insulation tape. Contact with other metallic objects or batteries could cause the battery to ignite or burst. Keep mem memory ory cards, hot shoes shoes,, and other small pa parts rts out of the reach of small children. Children may swallow small parts; keep out of reach of children. Should a child swallow a small part, seek medical attention or call emergency. Keep out of reach of small children. Among the elements that could cause injury are the strap, which could become entangled about a child’s neck, causing strangulation, and the flash, which could cause visual impairment. Follow the directions directions of airline and hospital personnel. This product generates radio-frequency emissions that could interfere with navigational or medical equipment. CAUTION Do not use this camera camera in locations affected ected by oil fumes, steam, steam, humidity or dust. dust. This can cause a fire or electric shock. Do not leave th this is camera in places subject to extremely high temperatures. Do not leave the camera in locations such as a sealed vehicle or in direct sunlight. This can cause a fire. For Your Safety CAUTION Do not place heavy objects on th thee camera. This can cause the heavy object to tip over or fall and cause injury. Do not move the camera whi while le the AC power adap adapter ter is still connected. connect ed. Do not pull on the connection cord to disconnect the AC power adapter. This can damage the power cord or cables and cause a fire or electric shock. Do not cover cover or wrap the camera camera or the AC power adapter in a cloth oorr blanket. This can cause heat to build up and distort the casing or cause a fire. Do not use the pl plug ug if it is damaged or if it does not fit securely into the outlet. Failure to observe this precaution could result in fire or electric shock. When you are clea cleaning ning the camera or yyou ou do not plan to usee the camera for an extended period, rem us remove ove the battery and disconnect and unplu unplugg the AC power adapt adapter. er. Failure to do so can cause a fire or electric shock. CAUTION When charging ends, unp When unplug lug the charger from the power socket. Leaving the charger plugged into the power socket can cause a fire. When a memory card is removed, the the card could come outt of the slot too quickly. ou quickly. Use your finger nger to hold it and gently ge ntly release the card. card. Injury could result to those struck by the ejected card. Request regular intern internal al testing and cleaning cleaning for your camera. Build-up of dust in your camera can cause a fire or electric shock. Contact your Fujifilm dealer to request internal cleaning every two years. Please note that this service is not free of charge. Danger Dan ger of explosion if battery is incorrectly incorrectly replaced. Replace only with the same or equivalent type. Batteries (battery pack or batteries batteries installed) shall not be exposed to excessive heat ssuch uch as sunshine, fire re or the like. 299 Technical Notes The Battery and Power Supply Note: Check the type of battery used in your camera and read The battery may be warm to the touch immediately after the appropriate sections. charging or use. This is normal. WARNING: Battery shall not be exposed to excessive heat ■ Battery Life such as sunshine, fire or the like. A noticeable decrease in the length of time the battery will The following describes the proper use of batteries and how hold a charge indicates that it has reached the end of its serto prolong their life. Incorrect use can shorten battery life or vice life and should be replaced. cause leakage, overheating, fire, or explosion. ■ Storage If the camera will not be used for an extended period, store Li-ion Batteries it at room temperature with the battery charged to approxiRead this section if your camera uses a rechargeable Li-ion mately one half to ⁄ capacity. battery. If the camera will not be used for an extended period, reThe battery is not charged at shipment. Charge the battery move the battery and store it in a dry place with an ambient before use. Keep the battery in its case when not in use. temperature of from +15 °C to +25 °C (+59 °F to +77 °F). Do ■ Notes on the Battery not store in locations exposed to extremes of temperature. The battery gradually loses its charge when not in use. ■ Cautions: Handling the Battery Charge the battery one or two days before use. • Do not transport or store with metal objects such as neckBattery life can be extended by turning the camera off when laces or hairpins. not in use. • Do not expose to flame or heat. Battery capacity decreases at low temperatures; a depleted • Do not disassemble or modify. battery may not function when cold. Keep a fully charged • Do not expose to low atmospheric pressures. spare battery in a warm place and exchange as necessary, • Use with designated chargers only. or keep the battery in your pocket or other warm place and • Dispose of used batteries promptly. insert it in the camera only when shooting. Do not place the • Do not drop or subject to strong physical shocks. battery in direct contact with hand warmers or other heating • Do not expose to water. devices. • Keep the terminals clean. • The battery and camera body may become warm to the ■ Charging the Battery The battery can be charged using a BC-W126S battery charger touch after extended use. This is normal. (available separately). Charging times will increase at ambient ■ Caution: Disposal temperatures below +10 °C (+50 °F) or above +35 °C (+95 °F). Dispose of used batteries in accord with local regulations. Do not attempt to charge the battery at temperatures above Attention should be drawn to the environmental aspects of +40 °C (+104 °F); at temperatures below +5 °C (+41 °F), the battery disposal. Use the apparatus under moderate climate. battery will not charge. Do not mechanically crush or split batteries. Do not attempt to recharge a fully charged battery. The battery does not however need to be fully discharged before charging. 12 AC Power Adapters • The AC power adapter is for indoor use only. • Be sure the cable is securely connected to the camera. • Turn the camera off before disconnecting the adapter. Disconnect the adapter by the plug, not the cable. • Do not disassemble. Technical Notes 12 • Do not expose to high heat and humidity. • Do not subject to strong physical shocks. • The adapter may hum or become hot to the touch during use. This is normal. • If the adapter causes radio interference, reorient or relocate the receiving antenna. Using the Camera • Do not aim the camera at extremely bright light sources, Trademark Information including artificial light sources or natural light sources Digital Split Image is a trademark or registered trademark of such as the sun in a cloudless sky. Failure to observe this FUJIFILM Corporation. Digital Micro Prism is a trademark or precaution could damage the camera image sensor. registered trademark of FUJIFILM Corporation. The typefaces • Strong sunlight focused through the viewfinder may dam- included herein are solely developed by DynaComware age the panel of electronic viewfinder (EVF). Do not aim Taiwan Inc. Apple, iPhone, iPad, Mac, OS X, macOS and the electronic viewfinder at the sun. Lightning are registered trademarks of Apple Inc. in the U.S.A. and other countries. Windows is a registered trademark of Take Test Shots Microsoft Corporation in the U.S.A. and other countries. Before taking photographs on important occasions (such as Android is a trademark or registered trademark of Google at weddings or before taking the camera on a trip), take a LLC. Adobe, the Adobe logo, Photoshop, and Lightroom test shot and view the results to ensure that the camera is are trademarks or registered trademarks of Adobe Systems functioning normally. FUJIFILM Corporation cannot accept Incorporated in the U.S.A. and other countries. Wi-Fi® and liability for damages or lost profits incurred as a result of Wi-Fi Protected Setup® are registered trademarks of the Wi-Fi product malfunction. Alliance. The Bluetooth® word mark and logos are registered Notes on Copyright trademarks owned by the Bluetooth SIG, Inc., and any use of Unless intended solely for personal use, images recorded such marks by Fujifilm is under license. The SDHC and SDXC using your digital camera system cannot be used in ways logos are trademarks of SD-3C, LLC. The HDMI logo is a tradethat infringe copyright laws without the consent of the own- mark or registered trademark of HDMI Licensing LLC. All other. Note that some restrictions apply to the photographing er trade names mentioned in this manual are the trademarks of stage performances, entertainments, and exhibits, even or registered trademarks of their respective owners. when intended purely for personal use. Users are also asked Electrical Interference to note that the transfer of memory cards containing images This camera may interfere with hospital or aviation equipor data protected under copyright laws is only permissible ment. Consult with hospital or airline staff before using the within the restrictions imposed by those copyright laws. camera in a hospital or on an aircraft. Handling Color Television Systems To ensure that images are recorded correctly, do not subject NTSC (National Television System Committee) is a color telethe camera to impact or physical shocks while images are vision telecasting specification adopted mainly in the U.S.A., being recorded. Canada, and Japan. PAL (Phase Alternation by Line) is a color Liquid Crystal television system adopted mainly in European countries and In the event that the display is damaged, care should be tak- China. en to avoid contact with liquid crystal. Take the urgent action Exif Print (Exif Version 2.32) indicated should any of the following situations arise: Exif Print is a newly revised digital camera file format in which • If liquid crystal comes in contact with your skin, clean the information stored with photographs is used for optimal colarea with a cloth and then wash thoroughly with soap and or reproduction during printing. running water. IMPORTANT NOTICE: Read Before Using the Software • If liquid crystal enters your eyes, flush the affected eye with clean water for at least 15 minutes and then seek medical Direct or indirect export, in whole or in part, of licensed softassistance. ware without the permission of the applicable governing • If liquid crystal is swallowed, rinse your mouth thoroughly bodies is prohibited. with water. Drink large quantities of water and induce vomLenses and Other Accessories iting, then seek medical assistance. Although the display is manufactured using extremely • Use a screw 4.5 mm or shorter when attaching a tripod. high-precision technology, it may contain pixels that are • Fujifilm will not be held liable for performance issues or always lit or that do not light. This is not a malfunction, and damage caused by the use of third-party accessories. images recorded with the product are unaffected. 300 For Your Safety NOTICES To prevent fire or shock hazard, do not expose the unit to rain or moisture. Please read the “Safety Notes” and make sure you understand them before using the camera. Perchlorate Material—special handling may apply. See: http://www.dtsc.ca.gov/hazardouswaste/perchlorate For Customers in the U. S. A. Tested To Comply With FCC Standards FOR HOME OR OFFICE USE Contains IC : 10293A-WMBNBM26A Contains FCC ID : COF-WMBNBM26A FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Notes on the Grant: To comply with Part 15 of the FCC Rules, this product must be used with a Fujifilm-specified ferrite-core A/V cable, USB cable, and DC supply cord. A lithium ion battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery. California Code of Regulations, Title 20, Division 2, Chapter 4, Article 4, Appliance Efficiency Regulations, Sections 1601 through 1609 Technical Notes 12 301 For Customers in Canada CAN ICES-3 (B)/NMB-3(B) CAUTION: This Class B digital apparatus complies with Canadian ICES-003. Industry Canada statement: This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios. The County Code Selection feature is disabled for products marketed in the US/ Canada. Radiation Exposure Statement: The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. X-S10 has been tested and found to comply with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. Technical Notes 12 302 Disposal of Electrical and Electronic Equipment in Private Households In the European Union, Norway, Iceland and Liechtenstein: This symbol on the product, or in the manual and in the warranty, and/or on its packaging indicates that this product shall not be treated as household waste. Instead it should be taken to an applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences to the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. This symbol on the batteries or accumulators indicates that those batteries shall not be treated as household waste. If your equipment contains easy removable batteries or accumulators please dispose these separately according to your local requirements. The recycling of materials will help to conserve natural resources. For more detailed information about recycling this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. In Countries Outside the European Union, Norway, Iceland and Liechtenstein: If you wish to discard this product, including the batteries or accumulators, please contact your local authorities and ask for the correct way of disposal. In Japan: This symbol on the batteries indicates that they are to be disposed of separately. For Your Safety 303 Technical Notes Wireless Network and Bluetooth Devices: Cautions This product complies with the following EU Directives: • Security: Wireless network and Bluetooth devices transmit data via radio and consequently their use requires great• RoHS Directive 2011/65/EU er attention to security than applies in the case of wired • RE Directive 2014/53/EU Hereby, FUJIFILM Corporation declares that the radio networks. - Do not connect to unknown networks or networks to equipment type FF200001 is in compliance with Directive which you do not have access rights, even if they are 2014/53/EU. displayed on your device, as such access may be considThe full text of the EU declaration of conformity is available at ered unauthorized. Connect only to networks to which the following internet address: you have access rights. https://dl.fujifilm-x.com/global/products/cameras/x-s10/ - Be aware that wireless transmissions may be vulnerable pdf/x-s10_doc-ngc.pdf to interception by third parties. This compliance is indicated by the following conformity - This device cannot be directly connected to telecommarking placed on the product: munications networks (including public wireless LANs) operated by providers or mobile, landline, Internet, or other telecommunications services. law: This marking is valid for non-Telecom products and EU harmo- • The following may be punishable by law: - Disassembly or modification or this device nized Telecom products (e.g. Bluetooth®). Removal of device certifi cation labels • Maximum radio-frequency power (EIRP): operates ates on the same fre frequency quency as commercial, commercial, edu• This device oper WLAN: 10.53 dBm cational, and medical medical devices and w wireless ireless transmitters. transmitters. It also Bluetooth: 2.54 dBm operates on the same frequency as licensed transmitters IMPORTANT: Read the following notices before using the camand special unlicensed low-voltage transmitters used in era’s built-in wireless transmitter. RFID tracking systems for assembly lines and in other simQ This product, which contains encryption function de- ilar applications. veloped in the United States, is controlled by the United • To prevent interference interference with the above dev devices, ices, observe the folfolStates Export Administration Regulations and may not lowing precautions. Confirm that the RFID transmitter is not be exported or re-exported to any country to which the in operation before using this device. Should you observe United States embargoes goods. that the device causes interference in licensed transmitters device.. Fujifilm does used for RFID tracking, immediately stop using the affected • Use only a wireless network or Bluetooth device not accept liability for damages resulting from unautho- frequency or move the device to another location. If you rized use. Do not use in applications requiring a high de- notice that this device causes interference in low-voltage gree of reliability, for example in medical devices or other RFID tracing systems, contact a Fujifilm representative. systems that may directly or indirectly impact human life. • Do not use this device on board an aircraft. Note that Bluetooth When using the device in computer and other systems that may remain on even when the camera is off. Bluetooth demand a greater degree of reliability than offered by wire- can be disabled by selecting OFF for D CONNECTION less network or Bluetooth devices, be sure to take all neces- SETTING > Bluetooth SETTINGS > Bluetooth ON/ sary precautions to ensure safety and prevent malfunction. OFF. Use which ch the device was pu purchased. rchased. This • only iinn the country in whi device conforms to regulations governing wireless network and Bluetooth devices in the country in which it was purchased. Observe all location regulations when using the device. Fujifilm does not accept liability for problems arising from use in other jurisdictions. locations subject to magnetic magnetic fields, • Do not use the device in locations static ele electricity, ctricity, or radio iinterference. nterference. Do not use the transmitter in the vicinity of microwave ovens or in other locations subject to magnetic fields, static electricity, or radio interference that may prevent reception of wireless signals. Mutual interference may occur when the transmitter is used in the vicinity of other wireless devices operating in the 2.4 GHz band. • The wireless transmitter operates in the 2.4 GHz band using DSSS, OFDM and and GFSK modulation. 12 For Your Safety Be sure to read these notes before using the lens Safety Notes WARNING • Make sure that you use the lens correctly. Read these safety notes and the camera Basic Manual carefully before use. • After reading these safety notes, store them in a safe place. About the Icons The icons shown below are used in this document to indicate the severity of the injury or damage that can result if the information indicated by the icon is ignored and the product is used incorrectly as a result. This icon indicates that death or serious WARNING injury can result if the information is ignored. This icon indicates that personal injury or CAUTION material damage can result if the information is ignored. The icons shown below are used to indicate the nature of the instructions which are to be observed. Triangular icons tell you that this information requires attention (“Important”). Circular icons with a diagonal bar tell you that the action indicated is prohibited (“Prohibited”). Filled circles with an exclamation mark indicate an action that must be performed (“Required”). Do not immerse Do not iimmerse mmerse in or expose to water. Failure to observe this precaution can cause a fire or electric shock. Do not disassemble Do not disassemble (do no nott open the case). Failure to observe this precaution can cause fire, electric shock, or injury due to product malfunction. Do not touch internal parts Should th thee case break open as the result of a fall fall or other accident, do not touch the ex exposed posed parts. Failure to observe this precaution could result in electric shock or in injury from touching the damaged parts. Remove the battery immediately, taking care to avoid injury or electric shock, and take the product to the point of purchase for consultation. Do not place on unstable surfaces. surfaces. The product may fall, causing injury. Do not view the sun through the lens or camera viewfinders. Failure to observe this precaution can cause permanent visual impairment. CAUTION Do not use or store in locations tthat hat are exposed to steam, or smoke or ar aree very humid or extr extremely emely dusty. Failure to observe this precaution can cause fire or electric shock. Do not leave in di direct rect sunlight or in locations subject to very high temperatures, temperatures, such as in a closed closed vehicle on a sunny sunny day. Failure to observe this precaution can cause fire. Keep out of the reach reach of small children. This product could cause injury in the hands of a child. Do not handle with wet hands. Failure to observe this precaution can cause electric shock. Keep the su sunn out of the frame w when hen shooting backlit subjects. Sunlight focused into the camera when the sun is in or close to the frame can cause fire or burns. Technical Notes When the product product is not in use, use, replace the lens ccaps aps and store out of direct sunlight. Sunlight focused by the lens can cause fire or burns. Do not carry carry the camera or lens lens while they are aattached ttached to a tripod. The product can fall or strike other objects, causing injury. 12 304 Product Care To ensure continued enjoyment of the product, observe the following precautions. Camera body: Use a soft, dry cloth to clean the camera body after each use. Do not use alcohol, thinner, or other volatile chemicals, which could discolor or deform the leather on the camera body. Any liquid on the camera should be removed immediately with a soft, dry cloth. Use a blower to remove dust from the monitor, taking care to avoid scratches, and then gently wipe with a soft, dry cloth. Any remaining stains can be removed by wiping gently with a piece of Fujifilm lens-cleaning paper to which a small amount of lens-cleaning fluid has been applied. To prevent dust entering the camera, replace the body cap when no lens is in place. Image sensor: Multiple photographs marred by spots or blotches in identical locations may indicate the presence of dust on the image sensor. Clean the sensor using D USER SETTING > SENSOR CLEANING. Technical Notes 12 305 Cleaning the Image Sensor Dust that cannot be removed using D USER SETTING > SENSOR CLEANING can be removed manually as described below. O Note that there will be a charge to repair or replace the image sensor if it is damaged during cleaning. 1 Use a blower (not a brush) to remove dust from the sensor. O Do not use a brush or blower brush. Failure to observe this precaution could damage the sensor. 2 Check whether the dust has been successfully removed. Repeat Steps 1 and 2 as necessary. 3 Replace the body cap or lens. Technical Notes 12 306 Firmware Updates Updates to product firmware may result in changes not described in the manual. For more information, visit: https://fujifilm-x.com/support/download/firmware/cameras/ Checking the Firmware Version O The camera will only display the firmware version if a memory card is inserted. 1 2 Turn the camera off and check that a memory card is inserted. 3 Turn the camera off. Turn the camera on while pressing the DISP/BACK button. The current firmware version will be displayed; check the firmware version. N To view the firmware version or update firmware for optional accessories such as interchangeable lenses, shoe-mounted flash units, and mount adapters, mount the accessories on the camera. Technical Notes 12 307 Troubleshooting Consult the table below should you encounter problems using your camera. If you don’t find the solution here, contact your local Fujifilm distributor. Power and Battery Problem Solution • The battery is exhausted: Charge the battery or insert a fully-charged spare battery (P 33). The camera does not turn on. • The battery is inserted incorrectly: Reinsert in the correct orientation (P 30). • The battery-chamber cover is not latched: Technical Notes Latch the battery-chamber cover (P 30). The monitor may not turn on if the camera is turned off The monitor does not and then on again very quickly. Keep the shutter button turn on. pressed halfway until the monitor activates. • The battery is cold: Warm the battery by placing it in a pocket or other warm place and reinsert it in the camera immediately before taking a picture. • There is dirt on the battery terminals: Clean the terminals with a soft, dry cloth. ON is selected for G AF/MF SETTING > PRE-AF: Turn • The battery runs down PRE-AF off (P 128). quickly. • The camera is in AUTO mode: To extend battery endurance, we recommend that you choose a different mode (P 56). • The battery has been charged many times: The battery has reached the end of its charging life. Purchase a new battery. The battery is exhausted: Charge the battery or insert a The camera turns off fully-charged spare battery (P 33). suddenly. 12 308 Troubleshooting Problem Solution • Insert the camera battery (P 30). • Reinsert the camera battery in the correct orientation (P 30). Charging does not start (USB). • Confirm that the camera is connected to the computer (P 33). • If the computer is off or in sleep mode, turn on or wake the computer and disconnect and reconnect the USB cable (P 33). • Confirm that ON is selected for USB POWER SUPPLY SETTING (P 238). • Insert the battery. Reinsert the battery in the correct orientation. Charging does not start • Make sure that the charger is correctly plugged in. • (battery charger). • Ensure that the plug adapter is correctly connected to the charger. Charging is slow. Charge the battery at room temperature. • There is dirt on the battery terminals: Clean the terminals with a soft, dry cloth (P 30). The indicator lamp The battery has been charged many times: The battery has • blinks, but the battery reached the end of its charging life. Purchase a new batdoes not charge. tery. If the battery still fails to charge, contact your Fujifilm dealer (P 292). The power supply icon is Confirm that ON is selected for USB POWER SUPPLY not displayed. SETTING (P 238). Technical Notes 12 309 Menus and Displays Problem Solution Select ENGLISH for D USER SETTING > Qa Display is not in English. (P 39, 208). Shooting Problem Solution • The memory card is full: Insert a new memory card or delete pictures (P 30, 188). • The memory card is not formatted: Format the memory card in the camera (P 206). • There is dirt on the memory card contacts: Clean the contacts with a soft, dry cloth. No picture is taken when The memory card is damaged: Insert a new memory card • the shutter button is (P 30). pressed. • The battery is exhausted: Charge the battery or insert a fully-charged spare battery (P 33). • The camera has turned off automatically: Turn the camera on (P 35). • You are using a third-party mount adapter: Select ON for SHOOT WITHOUT LENS (P 225). Mottling (“noise”) Gain is increased to aid composition when the subject is appears in the monitor poorly lit and aperture is stopped down, which may result or viewfinder when in noticeable mottling when images are previewed in the the shutter button is displays. Images taken with the camera are unaffected. pressed halfway. The camera does not The subject is not suited to autofocus: Use focus lock or manual focus. focus (P 86). Technical Notes 12 310 Troubleshooting Technical Notes Problem Solution No panorama is recorded The indicator lamp was orange when you attempted to record a when the shutter button panorama: Wait until the indicator lamps turns off (P 8). is pressed. • The subject’s face is obscured by sunglasses, a hat, long hair, or other objects: Remove the obstructions (P 129). • The subject’s face occupies only a small area of the frame: Change the composition so that the subject’s face occupies a larger area of the frame (P 129). No face is detected. • The subject’s face is turned away from the camera: Ask the subject to face the camera (P 129). • The camera is tilted: Keep the camera level. • The subject’s face is poorly lit: Shoot in bright light. • The flash is disabled: Adjust settings (P 148). • The battery is exhausted: Charge the battery or insert a fully-charged spare battery (P 33). The flash does not fire. • The camera is in bracketing or continuous mode: Select single frame mode (P 5). • The flash is lowered: Raise the flash (P 101). Some flash modes are OFF is selected for SOUND & FLASH: Select ON (P 209). not available. • The subject is not in range of the flash: Position the subject in range of the flash. The flash does not fully The flash window is obstructed: Hold the camera correctly. • light the subject. • Shutter speed is faster than the sync speed: Choose a slower shutter speed (P 58, 62, 324). • The lens is dirty: Clean the lens. • The lens is blocked: Keep objects away from the lens (P 42). Pictures are blurred. • s is displayed during shooting and the focus frame is displayed in red: Check focus before shooting (P 43). 12 311 Problem Solution • Shutter speed is slow and the ambient temperature is high: This is normal and does not indicate a malfunction. * Use pixel mapping (P 119). Pictures are mottled. * X-rays, cosmic rays, and other forms of radiation interacting with the image sensor may cause bright spots of various colors such as white, red, and blue. Pixel mapping helps reduce the occurrence of such bright spots. • The camera has been used continuously at high temperatures: Turn the camera off and wait for it to cool down (P 35, 320). • A temperature warning is displayed: Turn the camera off and wait for it to cool down (P 35, 320). Technical Notes 12 312 Troubleshooting Playback Problem Pictures are grainy. Playback zoom is unavailable. No sound in movie playback. Solution The pictures were taken with a different make or model of camera. The pictures were created using RESIZE or with a different make or model of camera. • Playback volume is too low: Adjust playback volume (P 212). • The microphone was obstructed: Hold the camera correctly during recording. • The speaker is obstructed: Hold the camera correctly during playback. • OFF is selected for SOUND & FLASH: Select ON (P 209). Selected pictures are not deleted. Some of the pictures selected for deletion are protected. Pictures remain after Remove protection using the device with which it was ERASE > ALL FRAMES is originally applied (P 192). selected. The battery-chamber cover was opened while the camFile numbering is era was on. Turn the camera off before opening the batunexpectedly reset. tery-chamber cover (P 231). Technical Notes 12 313 Connections Problem Solution The camera is connected to a TV: Pictures will be displayed The monitor is blank. on the TV instead of in the camera monitor (P 276). Q EVF ONLY + E is selected for VIEW MODE Both the TV and camera SETTING: Put your eye to the viewfinder or choose a monitor are blank. different VIEW MODE SETTING option (P 14). • The camera is not properly connected: Connect the camera properly (P 276). No picture or sound • Input on the television is set to “TV”: Set input to “HDMI” on TV. (P 276). • The volume on the TV is too low: Use the controls on the television to adjust the volume (P 276). The computer does not Be sure the camera and computer are correctly connected recognize the camera. (P 281). FUJIFILM X RAW STUDIO Check the option selected for CONNECTION MODE or FUJIFILM X Acquire on the camera. Select USB RAW CONV./BACKUP fails to correctly detect RESTORE before connecting the USB cable (P 285). the camera. ON is selected for USB POWER SUPPLY SETTING. SeCannot connect to lect OFF when the camera is connected via a Lightning iPhones or iPads. connection to a device that do not supply power (P 238). Confirm that the camera is correctly connected: The procedure Cannot connect to for connecting the camera varies with the type of connecsmartphone. tor with which the smartphone is equipped (P 286). Technical Notes 12 314 Troubleshooting Wireless Transfer For additional information on troubleshooting wireless connections, visit: https://digitalcamera-support-en.fujifilm.com/ Problem Cannot connect to smartphone. The camera is slow to connect or upload pictures to the smartphone. Upload fails or is interrupted. Solution • The smartphone is too far away: Move the devices closer (P 278). • Nearby devices are causing radio interference: Move the cam- era and smartphone away from microwave ovens or cordless phones (P 278). • The smartphone is connected to another device: The smart- phone and camera can connect to only one device at a time. End the connection and try again (P 278). • There are several smartphones in the vicinity: Try connecting again. The presence of multiple smartphones can make Cannot upload images. connection difficult (P 278). • The image was created on another device: The camera may not be able to upload images created on other devices. • The image is a movie: Uploading movies takes some time. In addition, smartphones may not accept upload of movies in formats they do not support. Select ON for GENERAL SETTINGS > RESIZE IMAGE Smartphone will not FOR SMARTPHONE H. Selecting OFF increases updisplay pictures. load times for larger images; in addition, some phones may not display images over a certain size (P 239). Technical Notes 12 315 Troubleshooting Miscellaneous Problem Solution • Temporary camera malfunction: Remove and reinsert the battery (P 30). The battery is exhausted: Charge the battery or insert a The camera is unresponsive. • fully-charged spare battery (P 33). • The camera is connected to a wireless LAN: End the con- nection. The camera does not func- Remove and reinsert the battery (P 30). If the probtion as expected. lem persists, contact your Fujifilm dealer. When NORMAL is selected for PERFORMANCE, the Motion in the viewfinder frame rate will drop if no operations are performed for a or monitor appears jerky set period. The normal frame rate will be restored after rather than smooth. you operate camera controls (P 230). • Adjust the volume (P 211). No sound. • OFF is selected for SOUND & FLASH: Select ON (P 209). Pressing the Q button does TTL-LOCK is active: End TTL-LOCK (P 149). not display the quick menu. Technical Notes 12 316 Warning Messages and Displays The following warnings appear in the display. Warning Description Low battery. Charge the battery or insert a fully-charged i (red) spare battery. Battery exhausted. Charge the battery or insert a fulj (blinks red) ly-charged spare battery. The camera cannot focus. Use focus lock to focus on ans (displayed in red with other subject at the same distance, then recompose the red focus frame) picture. The subject is too bright or too dark and the picture will be Aperture or shutter over- or under-exposed. Use the flash for additional lightspeed displayed in red ing when taking photographs of poorly-lit subject. FOCUS ERROR LENS CONTROL ERROR Camera malfunction. Turn the camera off and then on TURN OFF THE CAMERA again. If the message persists, contact a Fujifilm dealer. AND TURN ON AGAIN The shutter can only be released when a memory card is NO CARD inserted. Insert a memory card. • The memory card is not formatted or the memory card has been formatted in a computer or other device: Format the memory card using D USER SETTING > FORMAT. CARD NOT INITIALIZED • The memory card contacts require cleaning: Clean the contacts with a soft, dry cloth. If the message is repeated, format the card. If the message persists, replace the card. • Camera malfunction: Contact a Fujifilm dealer. Technical Notes 12 317 Warning LENS ERROR CARD ERROR PROTECTED CARD BUSY b MEMORY FULL Technical Notes 12 318 Description Turn the camera off, remove the lens, and clean the mounting surfaces, then replace the lens and turn the camera on. If the problem persists, contact a Fujifilm dealer. • The memory card is not formatted for use in the camera: Format the card. • The memory card contacts require cleaning or the memory card is damaged: Clean the contacts with a soft, dry cloth. If the message is repeated, format the card. If the message persists, replace the card. • Incompatible memory card: Use a compatible card. • Camera malfunction: Contact a Fujifilm dealer. The memory card is locked. Unlock the card. The memory card is incorrectly formatted. Use the camera to format the card. The memory card is full and pictures cannot be recorded. Delete pictures or insert a memory card with more free space. Warning Messages and Displays Warning Description • Memory card error or connection error: Reinsert the card or WRITE ERROR FRAME NO. FULL READ ERROR PROTECTED FRAME turn the camera off and then on again. If the message persists, contact a Fujifilm dealer. • Not enough memory remaining to record additional pictures: Delete pictures or insert a memory card with more free space. • The memory card is not formatted: Format the memory card. • The memory card was removed while data were being recorded: Do not remove the memory card during recording. The camera has run out of frame numbers (current frame number is 999-9999). Insert a formatted memory card and select RENEW for D SAVE DATA SET-UP > FRAME NO.. Take a picture to reset frame numbering to 100-0001, then select CONTINUOUS for FRAME NO.. • The file is corrupt or was not created with the camera: The file cannot be viewed. • The memory card contacts require cleaning: Clean the contacts with a soft, dry cloth. If the message is repeated, format the card. If the message persists, replace the card. • Camera malfunction: Contact a Fujifilm dealer. An attempt was made to delete or rotate to a protected picture. Remove protection and try again. Technical Notes 12 319 Warning Messages and Displays Warning CAN NOT CROP Description The picture is damaged or was not created with the camera. Print orders can contain no more than 999 pictures. Copy any additional pictures you wish to print to another memoDPOF FILE ERROR ry card and create a second print order. The picture cannot be printed using DPOF. CAN NOT SET DPOF F CAN NOT SET DPOF Movies cannot be printed using DPOF. The selected picture cannot be rotated. CAN NOT ROTATE F CAN NOT ROTATE Movies cannot be rotated. F CANNOT EXECUTE Red-eye removal cannot be applied to movies. Red-eye removal cannot be applied to pictures created m CANNOT EXECUTE with other devices. MISMATCH: 4K MODE The movie mode selected with the camera is not compatAND EXTERNAL MONITOR ible with the device to which the camera is connected via CHANGE MOVIE MODE HDMI. Try selecting a different movie mode (P 154). Turn the camera off and wait for it to cool. Mottling may p (yellow) increase in pictures taken when this warning is displayed. Turn the camera off and wait for it to cool. While this warning is displayed, movie recording may not be available, p (red) mottling may increase, and performance, including frame advance rate and display quality, may drop. Technical Notes 12 320 Memory Card Capacity The following table shows the recording time or number of pictures available at different image sizes. All figures are approximate; file size varies with the scene recorded, producing wide variations in the number of files that can be stored. The number of exposures or length remaining may not diminish at an even rate. Capacity T Photos O 3∶2 RAW (UNCOMPRESSED) RAW (LOSSLESS COMPRESSED) RAW (COMPRESSED) FINE 1030 16 GB NORMAL 1540 270 500 FINE 2060 32 GB NORMAL 3090 550 1010 Movies 1, 2 690 1400 V2160 20 minutes 40 minutes W1080 20 minutes 40 minutes 1 Use a UHS speed class 3 card or better. 2 Assumes default bit rate. O If the memory card has a capacity of over 32 GB, movies will be recorded in single files, regardless of size. If the card has a capacity of 32 GB or less, movies over 4 GB in size will be recorded uninterrupted across multiple files. Technical Notes 12 321 Specifications System Model Product Number Effective pixels Image sensor Storage media Memory card slot File system File format Image size Lens mount Sensitivity Technical Notes Metering 12 322 FUJIFILM X-S10 FF200001 Approx. 26.1 million 23.5 mm × 15.6 mm (APS-C), X-Trans CMOS sensor with primary color filter Fujifilm-recommended SD/SDHC/SDXC memory cards SD memory card slot (UHS-I compliant) Compliant with Design Rule for Camera File System (DCF2.0), Exif 2.32, and Digital Print Order Format (DPOF) • Still pictures: Exif 2.32 JPEG (compressed); RAW (original RAF format, uncompressed or compressed using a reversible or non-reversible algorithm; special purpose software required); RAW+JPEG available • Movies: H.264 standard with stereo sound (MOV/MP4) • Audio (voice memos): Stereo sound (WAV) O 3∶2 (6240 × 4160) O 1∶1 (4160 × 4160) O 16∶9 (6240 × 3512) P 3∶2 (4416 × 2944) P 1∶1 (2944 × 2944) P 16∶9 (4416 × 2488) Q 3∶2 (3120 × 2080) Q 1∶1 (2080 × 2080) Q 16∶9 (3120 × 1760) RAW (6240 × 4160) O panorama: vertical (2160 × 9600)/horizontal (9600 × 1440) P panorama: vertical (2160 × 6400)/horizontal (6400 × 1440) FUJIFILM X mount • Still pictures: Standard output sensitivity equivalent to ISO 160 – 12800 in increments of ⁄ EV; AUTO; extended output sensitivity equivalent to ISO 80, 100, 125, 25600, or 51200 • Movies: Standard output sensitivity equivalent to ISO 160–12800 in increments of ⁄ EV; AUTO; extended output sensitivity equivalent to ISO 25600 256-segment through-the-lens (TTL) metering; MULTI, SPOT, AVERAGE, CENTER WEIGHTED Specifications System Exposure control * Available with electronic shutter only. O The frame rate and number of frames per burst var- ies with shooting conditions and type of memory card used. Technical Notes Programmed AE (with program shift); shutter-priority AE; aperture-priority AE; manual exposure Exposure compensation • Still pictures: −5 EV – +5 EV in increments of ⁄ EV • Movies: −2 EV–+2 EV in increments of ⁄ EV Shutter speed • MECHANICAL SHUTTER ⁃ Mode P: 4 s to ¼ s ⁃ Mode A: 30 s to ¼ s ⁃ Modes S and M: 15 min. to ¼ s ⁃ Bulb: Max. 60 min. • ELECTRONIC SHUTTER ⁃ Mode P: 4 s to ⁄ s ⁃ Mode A: 30 s to ⁄ s ⁃ Modes S and M: 15 min. to ⁄ s ⁃ Bulb: Fixed at 1 s • MECHANICAL + ELECTRONIC ⁃ Mode P: 4 s to ⁄ s ⁃ Mode A: 30 s to ⁄ s ⁃ Modes S and M: 15 min. to ⁄ s ⁃ Bulb: Max. 60 min. Continuous Available frame advance rates CONTINUOUS MODE (JPEG) 30 30fps(1.25X CROP) * 20 20fps(1.25X CROP) * 10fps(1.25X CROP) * 10 20fps * 20 10fps * 10 8.0fps 8.0 5.0fps 5.0 4.0fps 4.0 3.0fps 3.0 12 323 System Focus • Mode: Single or continuous AF; manual focus with focus ring • Autofocus system: Intelligent hybrid AF (TTL contrast-detect/ phase-detection AF) with AF-assist illuminator • Focus-area selection: SINGLE POINT, ZONE, WIDE/TRACKING, ALL White balance Technical Notes 12 Auto (WHITE PRIORITY, AUTO, AMBIENCE PRIORITY), Custom 1, Custom 2, Custom 3, color temperature selection, direct sunlight, shade, daylight fluorescent, warm white fluorescent, cool white fluorescent, incandescent, underwater Self-timer Off, 2 sec., 10 sec. Flash • Type: Manual pop-up flash unit • Guide number: Approx. 7/22 (ISO 200, m/ft.) Flash mode • MODE: TTL MODE (FLASH AUTO, STANDARD, SLOW SYNC.), MANUAL, COMMANDER, OFF • SYNC. MODE: 1ST CURTAIN, 2ND CURTAIN, AUTO FP (highspeed sync) • RED EYE REMOVAL: e FLASH+REMOVAL, L FLASH, d REMOVAL, OFF Hot shoe Accessory shoe with TTL contacts; supports sync speeds as fast as ⁄ s Sync contact X contact; supports sync speeds as fast as ⁄ s Sync terminal – Electronic viewfinder 0.39-in., 2360k-dot OLED viewfinder; magnification 0.62× with 50 mm lens (35 mm format equivalent) at infinity and diopter (EVF) set to −1.0 m−1; diagonal angle of view approximately 31° (horizontal angle of view approximately 26°) • Diopter adjustment: −4 to +2 m−1 • Eyepoint: Approximately 17.5 mm LCD monitor 3.0-in/7.6 cm, 1040k-dot color touch screen LCD monitor, Vari-angle LCD monitor Movies • Movie size: V 16∶9, d 17∶9, W 16∶9, W 17∶9 (with stereo sound) • Frame rate: 59.94P, 50P, 29.97P, 25P, 24P, 23.98P • Bit rate: 200Mbps, 100Mbps, 50Mbps • Recording/output format: SD card, 4∶2∶0, 8-bit/HDMI output, 4∶2∶2, 10-bit High-speed movies • Movie size: FULL HD 16∶9 • Frame advance rate: 240P, 200P, 120P, 100P 324 Specifications Input/output terminals Microphone connector ⌀3.5 mm mini-stereo jack Headphone jack socket The USB connector can be converted to a headphone jack using the supplied headphone adapter Remote release connector ⌀3.5 mm 3-pole mini jack Digital input/output USB connector (Type-C) USB3.2 Gen1x1 HDMI output HDMI Micro connector (type D) Power supply/other Power supply NP-W126S rechargeable battery (supplied with camera) Battery life • Battery type: NP-W126S • Lens: XF35mmF1.4 R • External flash units: Disabled • Shooting mode: Mode P Number of shots PERFORMANCE LCD EVF BOOST Approx. 260 Approx. 235 NORMAL Approx. 325 Approx. 300 Total length of footage that can be recorded on a single charge Continuance Actual battery life battery life of movie capture Mode of movie capture Approx. 40 minutes Approx. 55 minutes V1 Approx. 40 minutes Approx. 65 minutes W2 High-speed movies 3 Approx. 40 minutes – 1 At a frame rate of 29.97 fps. 2 At a frame rate of 59.94 fps. 3 At a frame rate of 120 fps. Technical Notes CIPA standard. Measured using battery supplied with camera and SD memory card. Note: Battery endurance varies with battery charge level and the figures given above are not guaranteed. Battery endurance will decline at low temperatures. 12 325 Power supply/other Camera size 126.0 mm × 85.1 mm × 65.4 mm (32.9 mm excluding projections, (W × H × D) measured at thinnest part)/4.96 in. × 3.35 in. × 2.57 in. (1.30 in.) Camera weight Approx. 415 g/14.6 oz., excluding battery, accessories, and memory card Shooting weight Approx. 465 g/16.4 oz., including battery and memory card Operating conditions • Temperature: 0 °C to +40 °C/+32 °F to +104 °F • Humidity: 10% to 80% (no condensation) Wireless transmitter Wireless LAN Standards Operating frequency (center frequency) Access protocols Bluetooth® Standards Operating frequency (center frequency) Technical Notes 12 326 IEEE 802.11b/g/n (standard wireless protocol) 2,412 MHz–2,462 MHz (11 channels) Infrastructure Bluetooth version 4.2 (Bluetooth Low Energy) 2,402 MHz–2,480 MHz Specifications NP-W126S rechargeable battery Nominal voltage 7.2 V Nominal capacity 1260 mAh Operating 0 °C to +40 °C/+32 °F to +104 °F temperature Dimensions 36.4 mm × 47.1 mm × 15.7 mm/1.4 in. × 1.9 in. × 0.6 in. (W × H × D) Weight Approx. 47 g/1.7 oz. N Weight and dimensions vary with the country or region of sale. O Specifications and performance are subject to change without notice. Fujifilm will not be held liable for any errors this manual may contain. The appearance of the product may differ from that described in this manual. Technical Notes 12 327 MEMO 328 MEMO 329 7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN https://fujifilm-x.com
advertisement
Related manuals
Download
PDF
advertisement