Advertisement
Advertisement
WD-2030 XXXX customer display
1. FEATURES ......................................................................................................... 3
2. GENERAL SPECIFICATIONS ......................................................................... 4
3. UNPACKING AND CHECKING THE PARTS ................................................ 5
3.1
P
ARTS LIST
(W
ITH
B
ASE
PCB) .......................................................................... 5
3.2
P ARTS LIST (W ITHOUT B ASE PCB) .................................................................... 6
3.3
M ODEL N UMBER ............................................................................................... 7
4. DISPLAY MODULE INTERFACE ................................................................... 8
4.1
RS232 S PECIFICATIONS ..................................................................................... 8
4.1.1 RS232 connector to PCB (CN1) .................................................................. 8
4.1.2 RS232 connector to PCB (CN6) .................................................................. 9
4.1.3 RS232 connector to PCB (CN7) ................................................................ 10
4.2
USB SPECIFICATIONS ...................................................................................... 10
4.2.1 USB connector to PCB (CN2) ................................................................... 10
4.3
P
OWER
USB
SPECIFICATIONS
........................................................................... 11
4.3.1 USB Connector to PCB (CN2+CN9) ........................................................ 11
5. BASE PCB INTERFACE ................................................................................. 12
5.1
RS-232 I
NTERFACE CONNECTOR
(O
N THE BOTTOM OF THE BASE SECTION
) ........ 12
5.2
P OWER S UPPLY C ONNECTORS .......................................................................... 12
5.2.1 CN2 / Type: DC jack (5.5/2.1) .................................................................. 12
5.2.2 CN1,CN6 / Type: Miniature jacks quick lock 3 pin ................................... 12
5.3
CN5 / T YPE : DB25/F TOGETHER WITH SIGNALS OF RS-232C ............................ 12
5.4
RS232C LINK TO PC/HOST CONNECTOR (CN5) ............................................... 13
5.5
RS232C
LINK TO PRINTER CONNECTOR
(CN3) .................................................. 13
5.6
RS232C
LINK TO DISPLAY PANEL
(CN4) .......................................................... 13
6. USB BASE INTERFACE ................................................................................. 14
6.1
USB I
NTERFACE CONNECTOR
(O
N THE BUTTOM OF THE BASE SECTION
) ............. 14
6.2
P
OWER
S
UPPLY
C
ONNECTORS
.......................................................................... 14
6.2.1 CN1,CN6 / Type: Miniature jacks quick lock 3 pin ................................... 14
6.2.2 CN2 / Type: DC jack (5.5/2.1) .................................................................. 14
6.3
USB
INPUT PORT LINK TO
PC/HOST USB
CONNECTOR
(CN5) .......................... 15
6.4
RS232C LINK TO PRINTER CONNECTOR (CN3) .................................................. 15
6.5
RS232C LINK TO DISPLAY PANNEL (CN4) ........................................................ 15
7. DIP SWITCH SETTING .................................................................................. 16
7.1
C OMMAND TYPE SELECTION ............................................................................ 16
7.2
B AUD RATE SELECTION .................................................................................... 16
7.3
P
ARITY CHECK SELECTION
............................................................................... 16
7.4
I NTERNATIONAL CHARACTER SET SELECTION ................................................... 17
7.5
S ELF TEST & DEMO FUNCTION SELECTION ........................................................ 17
8. COMMAND ...................................................................................................... 18
1
WD-2030 XXXX customer display
8.1
CD5220 S
TANDARD
M
ODE
C
OMMAND
L
IST
..................................................... 18
8.2
UTC STANDARD MODE COMMAND LIST ............................................................ 21
8.3
UTC ENHANCED MODE COMMAND LIST ............................................................ 22
8.4
AEDEX
MODE COMMAND LIST
........................................................................ 23
8.5
PD3000 MODE COMMAND LIST ........................................................................ 23
8.6
ADM788 MODE COMMAND LIST ...................................................................... 24
8.7
DSP-800
MODE COMMAND LIST
....................................................................... 25
8.8
EPSON E
SC
/
POS COMMAND LIST
..................................................................... 27
9. CHARACTER SET .......................................................................................... 30
9.1
USA,
STANDARD CHARACTER SET
(20
H
– 7E
H
) ................................................. 30
9.2
I
NTERNATIONAL
C
HARACTER
S
ETS
.................................................................. 31
9.3
P AGE 0 (PC437: USA, S TANDARD E UROPE ) (80H – FFH) ................................ 32
9.4
P AGE 1 (K ATAKANA ) (80H – FFH) .................................................................. 33
9.5
P
AGE
2 (PC850: M
ULTILINGUAL
) (80H – FFH) ................................................ 34
9.6
P AGE 3 (PC860: P ORTUGUESE ) (80H – FFH) ................................................... 35
9.7
P AGE 4 (PC863: C ANADIAN -F RENCH ) (80H – FFH) ......................................... 36
9.8
P
AGE
5 (PC865: N
ORDIC
) (80H – FFH) ........................................................... 37
9.9
P AGE 6 (S LAVONIC ) (80H – FFH) .................................................................... 38
9.10
P AGE 7 (R USSIA ) (80H – FFH) ...................................................................... 39
9.11
P
AGE
19 (PC858 E
URO
) (80H – FFH) ............................................................ 40
9.12
P AGE 12 (G REEK ) (80H – FFH) ..................................................................... 41
9.13
P AGE 26 (WPC-1257) (80H – FFH) ............................................................... 42
APPENDIX A: DISPLAY WITH RECTANGLE BASE DIMENSION .............. 43
APPENDIX B: DISPLAY WITH ROUND BASE DIMENSION ........................ 43
APPENDIX C: RECTANGLE BASE DIMENSION ........................................... 44
APPENDIX D: ROUND BASE DIMENSION ..................................................... 44
APPENDIX E: TUBE DIMENSION .................................................................... 45
APPENDIX F: PASS THROUGH INSTALLATION GUIDE ............................ 47
2
WD-2030 XXXX customer display
1. Data can be displayed on 20 columns x 2 lines.
2. Blue-green color and large character are easy to eye.
3. The display panel is adjustable to provide the best view angle.
4. Provide 2 poles for base position installation.
5. The DIP-switches setting emulate commands mode, baud rate and international characters.
6. CD5220/UTC/EMAX/ADM/EscPOS/DSP-800 emulation command sets.
7. Characters can be defined by user-defined character commands. (For
Esc/POS/CD5220/DSP 800 command).
8. Provides an interface based on USB emulation RS-232C, baud rate
4,800, 9,600, 19,200 and 115,200 bps.
9. The VFD customer display and printer can be connected by pass-through (ref. Appendix F).
10. Various power connectors and wide range power input (5VDC or
9~45VDC).
3
WD-2030 XXXX customer display
NO ITEM
1 Display method
2 Number of character
3 Character font
Descriptions
Vacuum fluorescent display
20 columns x 2 lines
5 x 7 Dot matrix
4
5
Display color
Brightness
6 Fonts
Blue green
700 cd/ m
2
96 alphanumeric
13 kinds of international character sets
7 Character size
8 Power supply
9 Power consumption
10 MTBF
11 Panel dimensions
1 kind of user define character set
9.03 mm x 5. 25 mm
5VDC or 9~ 45VDC
6 W (Max.)
30,000 hours (power on time)
224 (W) x 93 (H) x 50(D) mm
Long 225(W) x 100(D) 500(H)mm
Middle 225(W) x 100(D) 281(H)mm 12 External dimensions
Short 225(W) x 100(D) 193(H)mm
13 Viewing angle (Horizontal) 120 degrees
14 Viewing angle (Vertical) 90 degrees
15 Rotation angle (Horizontal) 350 degrees
16 Tilt angle
17 Weight
0 ~ 60 degrees
1.25 Kg
18 Operating temperature
19 Operating Humidity
20 Storage Temperature
21 Storage Humidity
0 ~ 45 ℃
10%~90%
-10 ~ 50 ℃
10%~90%
Table 2-1
4
WD-2030 XXXX customer display
(1)
(3)
(2)
(4)
(5)
(6)
(7)
(11)
(10)
(9)
(8)
(1) Display Module.
(2) Nut.
(3) Knob.
(4) Neck.
(5) Display Cable.
(6) Long Pole
(7) Short Pole
(8) Base Housing.
(9) Base PCB.
(10) Power Adapter
(11) AC Cord
(12) Signal transmission line.
(13) Plate.
(12)
(13)
5
(2)
(1)
WD-2030 XXXX customer display
(3)
(4)
(1) Display Module.
(2) Nut.
(3) Knob.
(4) Neck.
(5) Long Pole
(6) Short Pole
(7) Base Housing.
(8) Signal transmission line.
(5)
(6)
(7)
6
(8)
WD-2030 XXXX customer display
WD-2030 X X X X
1
Interface
(Display Module)
R:RS-232 12V
S:RS-232 5V
U:USB
O:Power USB 5V
P:Power USB 12V
Q:Power USB 24V
2
Base Type
R:RS-232 Base
U:USB-B Base
H:HUSB Base
S:Only Rectangular
Base Housing
C:Only Circular
Base Housing
N:No Base
M:Module + Neck
4
3
2
1
3
Power Input
A:USA Cord + SPS
B:Jap.Cord + SPS
C:Eur. Cord + SPS
D:U.K Cord + SPS
E:Fra. Cord + SPS
F:Asu.Cord + SPS
G:SA. Cord + SPS
Y:No AC Cord + SPS
H:USA Cord + IEC
I:Jap.Cord + IEC
J:Eur. Cord + IEC
K:U.K Cord + IEC
L:Fra. Cord + IEC
M:Asu.Cord + IEC
N:SA. Cord + IEC
Z:No AC Cord + IEC
W:No AC Cord + No Power
1:USA Adaptor
2:Jap. Adaptor
3:Eur. Adaptor
4:U.K Adaptor
5:Fra. Adaptor
6:Asu. Adaptor
7:SA. Adaptor
O:Power USB 5V
P:Power USB 12V
Q:Power USB 24V
R:RS-232 Port(PC)
S:RS-232 DC Jack + No Power
U:USB Port(PC)
V:USB Plug (POWER SUPPY)
Table 3-2
4
Color
B:Black
W:White
7
WD-2030 XXXX customer display
Data transmission: Serial
Synchronization:
Handshaking:
Signal level:
Baud rates:
Parity and bit length
Stop bits:
Asynchronous
DTR / DSR
MARK = -3 to –15 V (logic “1”)
SPACE = +3 to +15 V (logic “0”)
4800,9600,19200 or 115200 bps
None parity, 8 data bits or
Even parity, 7 data bits
1 or more
Table 4-1
4.1.1 RS232 connector to PCB (CN1)
Type: RJ45/8P/8C
No Signal Direction
1,2 Vin
3,4 GND
Pin assignment
-
-
Function description
Power 5VDC or 9~45 VDC
Signal ground
5 CTS From Printer to Display Printer ready signal
6 RTS From Display to PC/Host Display/Printer ready signal
7 RXD From PC/Host to Display Display/Printing data signal
8 TXD From Display to Printer Printer status data signal
Table 4-2
8
WD-2030 XXXX customer display
4.1.2 RS232 connector to PCB (CN6)
Type: PH 2.0 mm/8P
No Signal Direction
1,2 Vin
3,4 GND
Pin assignment
-
-
Function description
Power 5VDC or 9~45 VDC
Signal ground
5 CTS From Printer to Display Printer ready signal
6 RTS From Display to PC/Host Display/Printer ready signal
7 RXD From PC/Host to Display Display/Printing data signal
8 TXD From Display to Printer Printer status data signal
Table 4-3
9
WD-2030 XXXX customer display
4.1.3 RS232 connector to PCB (CN7)
Type: PH 2.0 mm/9P
No Signal Direction
1 NC
Pin assignment
-
Function description
-
2 TXD From Display to Printer Printer status data signal
3 RXD From PC/Host to Display Display/Printing data signal
4 CTS From Printer to Display Printer ready signal
5 GND - Signal ground
6,8 RTS From Display to PC/Host Display/Printer ready signal
7 NC - -
9 Vin - Power 5VDC or 9 ~ 45 VDC
Table 4-4
Data transmission: USB emulation RS232C
Synchronization: Asynchronous
Handshaking: DTR / DSR
Signal level:
Baud rates:
Parity and bit length
Stop bits:
0~+3V
4800,9600,19200 or 115200 bps
None parity, 8 data bits or
Even parity, 7 data bits
1 or more
Table 4-5
4.2.1 USB connector to PCB (CN2)
Type: WAFER PH 2.0mm 4P
Pin assignment
No Signal Direction Function description
1 V+ 5V From PC/Host
2
3
D-
D+
4 GND
USB power 5 VDC
Data signal -
Data signal+
Signal ground
Table 4-6
10
WD-2030 XXXX customer display
Data transmission: USB emulation RS232C
Synchronization: Asynchronous
Handshaking:
Signal level:
Baud rates:
Parity and bit length
Stop bits:
DTR / DSR
0~+3V
4800,9600,19200 or 115200 bps
None parity, 8 data bits or
Even parity, 7 data bits
1 or more
Table 4-7
4.3.1 USB Connector to PCB (CN2+CN9)
CN2
Type: WAFER PH 2.0mm 4P
Pin assignment
No Signal Direction Function description
1
2
V+ 5V From PC/Host USB power 5 VDC
D- Data signal -
3 D+
4 GND
Data signal+
Signal ground
Table 4-8
CN9
Type: WAFER PH 2.0mm 5P
Pin assignment
No Signal Direction Function description
2,3 V+ 5/12/24V From PC/Host VPLUS
1,4 GND PWR Ground Signal ground
5 FG Data signal+
Table 4-9
11
WD-2030 XXXX customer display
CN1,CN6: 24VDC power supply pass-through connects
CN2: Power input connector from adapter
CN3: RS-232C connect to printer
CN4: Connect to display panel
CN5: RS-232C connect to PC/Host
The variable power input which are available on base connectors, but only if one connector can be selected for power input, the description as below:
5.2.1 CN2 / Type: DC jack (5.5/2.1)
Pin assignment
No Signal
+
-
Vin1
GND
Table 5-1
5.2.2 CN1,CN6 / Type: Miniature jacks quick lock 3 pin
Pin assignment
No
1
2
Signal
Vin2
GND
Table 5-2
Pin assignment
No
16,25
Signal
Vin3
7 GND
Table 5-3
12
WD-2030 XXXX customer display
Type: DB25/F
No Signal Direction
2
Pin assignment
TXD From printer to PC/Host
Function description
Printer status data
3 RXD From PC/Host to display Receive data
4,20 DTR From display to PC/Host Display/printer ready signal
6
7
DSR From PC/Host to printer
GND -
PC/Host ready signal
Signal ground
16,25 Vin3 From PC/Host to display Power input
Table 5-4
Type: DB9/M
No Signal Direction
Pin assignment
Function description
2 RXD From printer to PC/Host Printer status data
3 TXD From display to printer Printing data
5 GND - Signal ground
4,7 DTR From PC/Host to printer PC/Host ready signal
6 DSR From printer to display Printer ready signal
9 Vin2 From Hosiden to printer Power through to printer
Table 5-5
Type: RJ45/8P/8C
No Signal Direction
1,2 Vin
3,4 GND
Pin assignment
-
-
Function description
Power 5VDC or 9~45 VDC
Signal ground
5 DSR From Printer to Display Printer ready signal
6 DTR From Display to PC/Host Display/Printer ready signal
7 RXD From PC/Host to Display Display/Printing data signal
8 TXD From Display to Printer Printer status data signal
Table 5-6
13
WD-2030 XXXX customer display
CN1,CN6: 24VDC power supply pass-through connects
CN2: Power input connector from adapter
CN3: RS-232C connect to printer
CN4: Connect to display panel
CN5: USB input
There are variable power inputs which are available on base connector, but only one connector can be selected for power input function, the description as below:
6.2.1 CN1,CN6 / Type: Miniature jacks quick lock 3 pin
Pin assignment
No Signal
1
2
Vin2
GND
Table 6-1
6.2.2 CN2 / Type: DC jack (5.5/2.1)
Pin assignment
No Signal
+ Vin1
- GND
Table 6-2
14
WD-2030 XXXX customer display
Type: USB
Pin assignment
No Signal Direction Function description
1
2
V+
D-
5V From PC/Host USB power 5 VDC
Data signal -
3 D+
4 GND -
Data signal+
Signal ground
Table 6-3
Type: DB9/M
No Signal Direction
Pin assignment
Function description
2 RXD From printer to PC/Host Printer status data
3 TXD From display to printer Printing data
5 GND - Signal ground
4,7 DTR From PC/Host to printer PC/Host ready signal
6 DSR From printer to display Printer ready signal
9 Vin2 From Hosiden to printer Power through to printer
Table 6-4
Type: RJ45/8P/8C
No Signal Direction
1,2 Vin
3,4 GND
Pin assignment
-
-
Function description
Power 5VDC or 9~45 VDC
Signal ground
5 DSR From Printer to Display Printer ready signal
6 DTR From Display to PC/Host Display/Printer ready signal
7 RXD From PC/Host to Display Display/Printing data signal
8 TXD From Display to Printer Printer status data signal
Table 6-5
15
WD-2030 XXXX customer display
1 2 3 4 5 6 7 8 9 10 11 12
DIP ON
SW1 SW2
ON ON
OFF
ON
ON
OFF
OFF
ON
OFF
ON
OFF
OFF
ON
ON
OFF
OFF
SW3 Command type
ON DSP800
ON ESC/pos
ON PD3000
ON ADM 788
OFF EMAX(Aedex)
OFF UTC/P
OFF UTC/S
OFF CD5220
Table 7-1
SW8
ON
OFF
ON
OFF
SW9
ON
ON
OFF
OFF
Baud rate (bps)
4800
9600
19200
115200
Table 7-2
SW10
ON
OFF
Parity & data bits
None-parity , 8 data bits
Even-parity , 7 data bits
Table 7-3
16
WD-2030 XXXX customer display
SW4 SW5 SW6 SW7 Character set Code table ( 80H-FFH)
ON ON ON ON U.S.A. PC-437(USA&Europe)
OFF ON ON ON France
ON OFF ON ON Germany
PC-858(Euro)
PC-858(Euro)
OFF OFF ON ON U.K.
ON ON OFF ON Denmark I
OFF ON OFF ON Sweden
ON OFF OFF ON Italy
PC-858(Euro)
PC-858(Euro)
PC-858(Euro)
PC-858(Euro)
OFF OFF OFF ON Spain
ON ON ON OFF Japan
OFF ON ON OFF Norway
ON OFF ON OFF Denmark II
OFF OFF ON OFF U.S.A
ON ON OFF OFF U.S.A
OFF ON OFF OFF U.S.A
ON OFF OFF OFF U.K.
OFF OFF OFF OFF U.S.A
Table 7-4
PC-858(Euro)
Katakana
PC-858(Euro)
PC-858(Euro)
Slavonic
Russia
PC860 (Portuguese)
Greek
WPC1257
SW11
ON
OFF
Function
Enable
Disable
Table 7-5
* SW12 reserve
17
WD-2030 XXXX customer display
Command
ESC DC1
ESC DC2
ESC DC3
Code (hex)
1B 11
1B 12
1B 13
ESC QA ....CR
1B 51 41 data x m 0D
Function description
Overwrite mode
Vertical scroll mode
Horizontal scroll mode
Set the string display mode,writed string to upper line m ≦ 20
ESC QB ....CR 1B 51 42 data x m 0D
Set the string display mode, writed string to lower line m ≦ 20
ESC QD ....CR 1B 51 44 data x m 0D
ESC [ D
BS
ESC [ C
HT
ESC [ A
ESC [ B
LF
ESC [ H
HOM
ESC [ L
CR
ESC [ R
ESC [ K
ESC l x y
1B 5B 44
08
1B 5B 43
09
1B 5B 41
1B 5B 42
0A
1B 5B 48
0B
1B 5B 4C
0D
1B 5B 52
1B 5B 4B
1B 6C x y
Upper line message scroll continuously m ≦ 40
Move cursor left
Move cursor left
Move cursor right
Move cursor right
Move cursor up
Move cursor down
Move cursor down
Move cursor to home position
Move cursor to home position
Move cursor to left-most position
Move cursor to left-most position
Move cursor to right-most position
Move cursor to bottom position
Move cursor to specified position
1 ≦ x ≦ 20 ,row position
1 ≦ y ≦ 2 ,column position
18
WD-2030 XXXX customer display
Command Code (hex) Function description
ESC @
CLR
CAN
1B 40
0C
18
Initialize display
Clear display screen , and clear string mode
Clear cursor line, and clear string mode
ESC * n
1B 2A n Brightness adjustment
1 ≦ n ≦ 4
[a
(m-n+1)
(P1..pa)]x x (m-n+1)
ESC ? n
ESC % n
1B 3F n
1B 25 n
Define download characters.
32 ≦ n ≦ m 255
1 ≦ a ≦ 5 p1..p5 =row1..row5
Deletes download characters.
32 ≦ n ≦ m 255
Select/cancel download character set. n = 0 , Cancel n = 1 , Select
ESC _ n
ESC f n
ESC c n
ESC = n
1B 5F n
Set cursor on/off n = 1 , cursor on n = 2 , cursor off
1B 66 n
1B 63 n
Select international fonts set, refer *2
Select code, refer *3
1B 3D n
Select peripheral device, display or printer n bit 0 = 1 select printer n bit 1 = 1 select display
Table 8-1
19
WD-2030 XXXX customer display
*
2: The parameter of international fonts set control by command “ESC f n”
Parameter “n” International Font Set
“A” U.S.A.
“G”
“I”
Germany
Italy
“J”
“U”
“F”
“S”
Japan
U.K.
France
Spain
“N”
“W”
“D”
Norway
Sweden
Denmark I
“E”
“L”
“R”
Denmark II
Slavonic
Table 8-2
Russia
*3: The parameter of the code table control by command “ESC c n”
Parameter “n”
“A”
“J”
“L”
“R”
International font set
Compliance with ASCII code
Compliance with JIS code
Compliance with SLAVONIC code
Compliance with RUSSIA code
Table 8-3
20
WD-2030 XXXX customer display
Command Code (hex) Function description
EOT n
BS
HT
LF
CR
DLE
DC1
DC2
DC3
DC4
CAN
EM
FS
GS
US
RS
ESC d
04 n
08
09
0A
0D
0F
11
12
13
14
18
19
1C
1D
1F
1E
1B 64
Display Dimming n = 20h, 40h, 60h, FFh
Back space
Horizontal tab
Line feed
Carriage return
Display position
Over write display mode
Vertical scroll mode
Cursor on
Cursor off
Clear to end of line
Clear to end of display
Flashing text start
Flashing text end
Reset display
Home and clear display
Change to UTC enhanced mode
Table 8-4
21
WD-2030 XXXX customer display
Command
SI
SO
ESC u A ..CR
ESC u B ..CR
ESC u D ..CR
Code (hex)
0F
0E
1B 75 41 data x m 0D
1B 75 42 data x m 0D
1B 75 44 data x m 0D
Function description
Flashing text start
Flashing text stop
Upper line display
0 ≦ m ≦ 20
Bottom line display
0 ≦ m ≦ 20
Upper line message scroll continuously
0 ≦ m ≦ 40
ESC u E ..CR
ESC u F ..CR
ESC u H ..CR
1B 75 45 “hh:mm” 0D
1B 75 46 data x m 0D
1B 75 48 n m 0D
Display time
’00’ ≦ hh ≦ ‘23’
’00’ ≦ mm ≦ ‘59’
Upper line message scroll once pass
Change attention code
32 ≦ n ≦ 255
32 ≦ m ≦ 255
ESC u I ..CR
ESC RS CR
1B 75 49 data x m 0D
1B 0F 0D
Two line display
0 ≦ m ≦ 40
Change to UTC standard mode
Table 8-5
22
WD-2030 XXXX customer display
Command
! # 1 ....CR
! # 2 ....CR
! # 4 ....CR
! # 5 ....CR
! # 6 ....CR
Code (hex)
21 23 31 data x m 0D
21 23 32 data x m 0D
21 23 34 data x m 0D
21 23 35 “hh:mm” 0D
21 23 36 data x m 0D
Function description
Upper line display
0 ≦ m ≦ 40
Bottom line display
0 ≦ m ≦ 40
Upper line message scroll continuously
0 ≦ m ≦ 40
Display time
‘00’ ≦ hh ≦ ‘23’
’00’ ≦ mm ≦ ‘59’
Upper line message scroll one pass
0 ≦ m ≦ 40
! # 8 ....CR 21 23 38 n m 0D
Change attention code
32 ≦ n ≦ 255
32 ≦ m ≦ 255
! # 9 ....CR 21 23 39 data x m 0D
Two line display
0 ≦ m ≦ 40
Table 8-6
Command
DC2
DC1
EOT
BS
HT
LF
CR
08
09
0A
0D
Code (hex)
12
11
04
Function description
Vertical Scroll Mode
Normal Display Mode
Brightness Control
Back Space
Horizontal Tab
Line Feed
Carriage Return
DLE
DC3
DC4
US
10
13
14
1F
Digit Select
Cursor On
Cursor Off
Reset
ETX 03 Down Load Font
ENQ d1~d45 CR 05 d1~d45 0D Message Scroll
SOH
! # STX
01
21 23 02
Data to Peripheral
Data to Display
Table 8-7
23
WD-2030 XXXX customer display
Command Code (hex) Function description
CLR 0C Clear display
CR
SLE1
SLE2
0D
0E
0F
Carriage return
Clear up line and move cursor to upper line left most end
Clear low line and move cursor to lower line left most end
DC0 n 10 n
Set period to upper line last n position
31H ≦ n ≦ 44H
DC1 n 11 n
Set line blanking , n = 31H up line n = 32H low line
DC2 n
SF1
SF2
12 n
1E
1F
Clear line blanking , n = 31H up line n = 32H low line
Clear field 1 and move cursor to field 1 fast position
Clear field 2 and move cursor to field 2 fast position
Table 8-8
24
WD-2030 XXXX customer display
Command
EOT SOH I n ETB
EOT SOH P n ETB
EOT SOH C n m ETB
Code (hex) Function descriptions
04 01 49 n 17 Select international character set.
04 01 50 n 17
Move cursor to specified position.
31H ≦ n ≦ 58H
04 01 43 n m 17
Clear display range from n position to m position and move cursor to n position.
31H ≦ n ≦ m ≦ 58H
EOT SOH S n ETB
EOT SOH D n m ETB
EOT SOH A n ETB
EOT SOH F n ETB
EOT SOH & n [px5] ETB
EOT SOH ? n ETB
EOT SOH = n ETB
EOT SOH % ETB
EOT SOH @ ETB
04 01 53 n 17
Save the current displaying data to n layer for demo display.
31H ≦ n ≦ 33H
Refer*1
Display the saved data
04 01 44 n m 17
31H ≦ n ≦ 37H
31H ≦ m ≦ 37H
Refer*2
04 01 41 n 17
04 01 46 n 17
Brightness adjustment.
31H ≦ n ≦ 34H
Blink display screen.
0 ≦ n ≦ 255
04 01 26 n Define download characters p1...p5 17 20H < n ≦ FFH
04 01 3F n 17
Delete download characters.
20H < n ≦ FFH
04 01 3D n 17
Select peripheral device. n = 31H,select printer n = 32H,select display
04 01 25 17
04 01 40 17
Initialize display
Execute self-test
Table 8-9
25
WD-2030 XXXX customer display
*REMARK
*1 Using commands “EOT SOH S n ETB”, the value (Hex) of parameter n Layer
31h Save data in layer 1
32h Save data in layer 2
33h Save data in layer 3
Table 8-10
*2 Using commands “EOT SOH D n m ETB”, the value (Hex) of parameter. WinPOS extended “select mode” from 33h to 37h n Select layer
31h Demo layer 1
32h Demo layer 2
33h Demo layer 3 m Select mode
31h Demo mode 1
32h Demo mode 2
33h Demo mode 3
34h Demo layer 1 + 2
35h Demo layer 1 + 3
34h Demo mode 1 + 2
35h Demo mode 1 + 3
36h Demo layer 2 + 3 36h Demo mode 2 + 3
37h Demo layer 1 + 2 + 3 37h Demo mode 1 + 2 + 3
Table 8-11
26
WD-2030 XXXX customer display
Command
HT
BS
US LF
LF
US CR
CR
HOM
US B
US $ x y
CLR
CAN
US X n
US E n
ESC @
ESC t n
Code (hex) Function description
09 Move cursor right.
08
1F 0A
Move cursor left.
Move cursor up.
0A
1F 0D
0D
0B
Move cursor down.
Move cursor to right-most position.
Move cursor to left-most position.
Move cursor to home position.
1F 42
1F 24 x y
Move cursor to bottom position.
Move cursor to specified position.
1 ≦ x ≦ 20
1 ≦ y ≦ 2
0C
18
1F 58 n
Clear display screen.
Clear cursor line
Brightness adjustment.
1 ≦ n ≦ 4
1F 45 n
1B 40
1B 74 n
Blink display screen.
0 ≦ n ≦ 255
Initialize display.
Select character code table.
0 ≦ n ≦ 7, 19, 12, 26
Refer*2
ESC R n 1B 52 n
Select international character set.
0 ≦ n ≦ 10
Refer*1
US r n
US MD1
US MD2
US MD3
1F 72 n
1F 01
1F 02
1F 03
Select/cancel reverse character.
0 ≦ n ≦ 1
Specify overwrite mode.
Specify vertical scroll mode.
Specify horizontal scroll mode.
ESC & s n m
[a(p1..pa)]x m-n
1B 26 1 n m
Define download characters.
32 ≦ n ≦ 255
[a(p1..pa)]x m-n
1 ≦ a ≦ 5 p1..p5 =row1..row5
27
WD-2030 XXXX customer display
Command Code (hex) Function description
ESC ? 1B 3F n
Delete downloads characters.
32 ≦ n ≦ 255
ESC % 1B 25 n
Select/cancel download character set. n = 0 , Cancel n = 1 , Select
ESC = n
US :
US ^ n m
US @
US T h m
US U
US C n
1B 3D n
1F 3A
1F 5E n m
1F 40
1F 54 h m
1F 55
1F 43 n
Select peripheral device.
n bit 0 = 1 select printer
n bit 1 = 1 select display
Set starting/ending position of macro definition.
Execute and quit macro.
0 ≦ n ≦ 255 , 0 ≦ m ≦ 255
Execute self-test.
Display time
0 ≦ h ≦ 23 , 0 ≦ m ≦ 59
Display time continuously
Select / cancel cursor display n = 1 , cursor on n = 0 , cursor off
Table 8-12
28
WD-2030 XXXX customer display
*REMARK
*1 Select international character set
7
8
9
10
3
4
5
6 n International font
0 U.S.A.
1
2
France
Germany
U.K.
Denmark I
Sweden
Italy
Spain
Japan
Norway
Denmark II
Table 8-13
*2 Select character code table n Code table
0 Page 0, (PC437,USA standard Euro.)
1 Page 1,(Katakana for Japan)
2 Page 2,(PC850,Multilingual)
3 Page 3,(PC860, Portuguese)
4 Page 4,(PC863,Canadian-French)
5 Page 5,(PC865,Nordic)
6 Page 6,(Slavonic)
7 Page 7,(Russia)
19 Page 19,(PC858, Euro)
12 Page 12,(Greek)
26 Page 26,(WPC1257.)
Table 8-14
29
30H
40H
50H
60H
70H
WD-2030 XXXX customer display
20H
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
Table 9-1
30
WD-2030 XXXX customer display
Country\Hex
U.S.A
23 24 40 5B 5C 5D 5E 60 7B 7C 7D 7E
France
Germany
U.K
Denmark I
Sweden
Italy
Spain
Japan
Norway
Denmark II
Slavonic
Russia
Table 9-2
31
90H
A0H
B0H
C0H
D0H
E0H
F0H
WD-2030 XXXX customer display
80H
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
Table 9-3
32
90H
A0H
B0H
C0H
D0H
E0H
F0H
WD-2030 XXXX customer display
80H
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
Table 9-4
33
90H
A0H
B0H
C0H
D0H
E0H
F0H
WD-2030 XXXX customer display
80H
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
Table 9-5
34
90H
A0H
B0H
C0H
D0H
E0H
F0H
WD-2030 XXXX customer display
80H
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
Table 9-6
35
90H
A0H
B0H
C0H
D0H
E0H
F0H
WD-2030 XXXX customer display
80H
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
Table 9-7
36
90H
A0H
B0H
C0H
D0H
E0H
F0H
WD-2030 XXXX customer display
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
80H
Table 9-8
37
90H
A0H
B0H
C0H
D0H
E0H
F0H
WD-2030 XXXX customer display
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
80H
Table 9-9
38
90H
A0H
B0H
C0H
D0H
E0H
F0H
WD-2030 XXXX customer display
80H
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
Table 9-10
39
90H
A0H
B0H
C0H
D0H
E0H
F0H
WD-2030 XXXX customer display
80H
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
Table 9-11
40
90H
A0H
B0H
C0H
D0H
E0H
F0H
WD-2030 XXXX customer display
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
80H
Table 9-12
41
90H
A0H
B0H
C0H
D0H
E0H
F0H
WD-2030 XXXX customer display
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
80H
Table 9-13
42
WD-2030 XXXX customer display
Unit : mm
Unit : mm
43
WD-2030 XXXX customer display
Unit : mm
Unit : mm
44
WD-2030 XXXX customer display
45
WD-2030 XXXX customer display
46
Unit : mm
WD-2030 XXXX customer display
PC/Host
Display
Printer
＊ Only for CD5220/UTC/EMAX/EscPOS/DSP-800 emulation command sets.
＊ If printer is EPSON TM serial printer then the pass through cable and display cable are same.
47
The public link to your chat has been updated. You may view and manage your chat links after registration here.
Advertisement
What are the supported communication parameters for device port settings (e.g., baud rate, parity, stop bits)?
Supported parameters include: Baud rates (4,800, 9,600, 19,200, or 115,200 bps), Parity/Data Bits (None parity with 8 bits or Even parity with 7 bits), and Stop bits (1 or more). These settings are configured using DIP switches (SW8, SW9, SW10).
Login to continue
