GVA GVADLED32, GVADLED32C, GVALED15, GVALEDJ15 Instruction Manual
Add to my manuals
59 Pages
The GVA GVADLED32C brings you a range of entertainment and functionality options in a single device.
The 32-inch HD LED LCD TV Combo offers stunning visuals with its high-quality display. Its versatility is further enhanced by its ability to function as a TV, DVD player, and multimedia player. With its multi-functional nature, you can enjoy a wide range of content from broadcast channels to DVDs and USB-stored media files.
Additionally, the GVA GVADLED32C features HDMI CEC control for seamless integration with other HDMI-compatible devices. Its PVR and Time Shift capabilities allow you to record and pause live TV, giving you greater control over your viewing experience.
The built-in USB port lets you conveniently connect USB drives and enjoy your favorite multimedia content on the big screen. Whether it's movies, music, or photos, the GVA GVADLED32C offers a versatile and immersive entertainment experience.
advertisement
18.5” (47cm) HD LED LCD TV COMBO / GVALEDC19J Instruction Manual 2 Contents Preface 4 Safety Precautions 4 Important Safety Instructions 7 In the Carton 10 Connections and Functions 11 Basic Installation 12 Remote Control 16 Remote Control Setup 20 Basic Operation 21 Picture Menu 22 Sound Menu 25 Channel Menu 28 Lock Menu 33 Hotel Mode 35 Setup Menu 36 HDMI CEC Control 38 PVR and Time Shift Operation 39 PVR Setting 39 First Time Setup 39 Reset 39 USB Device Setup 40 Timeshift 41 Instant Recording 42 Time Recorder 42 Playlist 43 EPG (Electronic Program Guide) 44 ATV / HDMI / AV / YPbPr / PC 45 Multi Media Menu Operation 46 Photo 46 Music 47 Movie 47 Text 48 3 Contents DVD Function 49 Specifications 52 Wall Mounting Instructions 53 Care and Maintenance 54 FAQs 55 4 1. PREFACE Thank you for buying this TV ! Please read this manual throughly before operati Make sure the TV was not damaged in transit. Should the TV is damaged, do not your dealer. Check that you have all the accessories according to the model. Preface Thank you for building this TV! Please read this manual thoroughly before operating the TV. Make sure the TV was not damaged in transit. Should the TV is damaged, do not install it and contact your dealer. Check that you have all the accessories according to the model. 2. SAFETY PRECAUTIONS Safety Precautions TV on a surface. stable surface. PutPut the the TV on a stable Do not place any material on the TV. Do not place any material on the TV. Do not use the TV with fixtures other than those provided or Do not use the TV with fixtures other than those provided or suggested by theby manufacturer. suggested the manufacturer. Do not block or cover the ventilation openings on the TV. If you have a wall mount, check that it is steady. Do not block or cover the ventilation openings on the TV. If you have a wall mount, check that it is steady. Do not block or cover the ventilation openings on the TV. If you have a wall mount, check that it is steady. 5 Safety Precautions (Cont.) Power cord and cables must be properly routed and protected to prevent people from stepping on them and causing the TV cord and cables must be properly routed and protect to Power fall. people from stepping on them and causing the TV to fall. 3 Keep the TV dry and away from humidity. Keep the TV dry and away from humidity. Keep the TV away from heat sources . Keep the TV away from heat sources. Unplug the TV before cleaning it. Do not use solvent or liquid to cle Unplug the TV.the TV before cleaning it. Do not use solvent or liquid cleanthe theTV TV.with OnceaClean the TV with soft and dry Only to clean soft and dry cloth. cloth. Only clean the TV with a soft and dry cloth. 6 Safety Precautions (Cont.) In cause of troubleshooting, do not use spare parts other than those suggested by the manufacturer. Using In case of spare troubleshooting, not useshocks, spare shortparts other than those inadequate parts can leaddo to electric suggested theincidents. manufacturer. Using inadequate spare parts can circuits fire orby other lead to electric shocks, short-circuits fire or other incidents. Unplug TVTV during lightening storms or when unused for Unplugthe the during lightening storms or when unused for long pe long periods of time. of time. 4 7 Important Safety Instructions Read this manual thoroughly before first use and keep it in a safe place for future reference, along with the warranty card, purchase receipt and carton. The safety precautions enclosed herein reduce the risk of fire, electric shock and injury when correctly adhered to. Usage conditions and restrictions To prevent any injuries, the following safety precautions should be observed in the installation, use, servicing and maintenance of equipment. Before operating this equipment, please read this manual completely, and keep it nearby for future reference. • Take notice of all the warnings. • Do not use this TV near water. • Clean only with a dry cloth. • Do not block any of the ventilation openings. • Install in accordance with the manufacturer’s instructions. • Do not install near any heat sources such as radiators, heat registers, stoves, or other TV’s (including amplifiers) that produce heat. • Do not alter the grounding type plug provided with the TV. A grounding type plug has two blades and a third grounding prong. The third prong is provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. • Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the TV. • Only use the attachments/accessories specified by the manufacturer. • U se only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the TV. • Unplug this TV during lightning storms or when unused for long periods of time. • The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. • Young children should be supervised to ensure they do not play with the appliance. • Refer all servicing to qualified service personnel. Servicing is required when the TV has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilt or objects have fallen into the TV, the TV has been exposed to rain or moisture, does not operate normally, or has been dropped. • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. NOTE: The TV must not be exposed to dripping or splashing and no objects filled with liquids, such as vases, should be placed on the TV. 8 Important Safety Instructions Electrical safety, power cord and plug • Before installing this TV set, make sure your outlet voltage corresponds to the voltage stated on the appliance rating label. • To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. • Do not overload the power cord or power outlet. • Do not let the cord hang over the edge of a table or counter, or touch any hot surface. • Do not allow anything to rest on or roll over the power cord and signal cable. • Protect the power cord and signal cable from being trampled. • Do not expose the power cord and signal cable to moisture. Position • If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as: • Securely attaching the TV to the wall mount fastened on the wall. • Only using furniture that can safely support the television. • Ensuring the television is not overhanging the edge of the supporting furniture. • Educating children about the dangers of climbing on furniture to reach the TV controls. • Not standing the TV on cloth or other materials placed between the television and supporting furniture. • Not placing the television on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television to a suitable support. • When deciding on where to put the TV set, make sure the place is: • Well ventilated. • Away from damp and cold. • Protected from overheating and away from direct sunlight. • Away from moisture drips or splashes. • Protected from excessive dust. • Do not install this equipment in a confined space such as a bookcase or similar unit. • Do not put any objects filled with liquids, such as vases, on top of the TV set. • Do not place any naked flame sources, such as lighted candles, on top of the TV set. Cleaning and maintenance • Dust the TV set by wiping the screen and cabinet with a soft, clean cloth. 9 Important Safety Instructions • Do not apply excessive force to the screen when cleaning. • Do not clean the screen with water or chemical cleaners as this may damage the LED screen surface. • Do not dismantle this product by yourself, as this may cause damage. There are no userserviceable parts contained in the TV set. • If your TV set has been damaged, contact the after sales support line for advice or take it to a local service centre for inspection or repair. No liability can be accepted for any damage caused by non-compliance with these instructions or any other improper use or mishandling of appliance. CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the documentation accompanying this unit. TV with Class 1 construction shall be connected to a main socket outlet with a protective earthing connection. WARNING: TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR AN ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTIONS: • T hese servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. • Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 10 In the Carton 11 Connections and Functions Connections and Functions Connections and Functions 11 11 Front and Back Connection of LED TV Front Back Connection ofturn LED LCD TV LCD TV Front andbutton Back Connection of LED 1. and Press “STANDBY” to 2. 3. 4. 5. 6. 7. Play8. 9. standby mode on or off. Press “SOURCE” to select the input source. Press “MENU” to bring up the main menu on the screen. Press “CH+” or “CH-” to scan through channels. Press “VOL+” or “VOL-” to increase or decrease the volume. POWER INDICATOR: Show red in standby mode, show green when your TV is switched on. Play REMOTE SENSOR: Infrared sensor for the remote control. Play / Pause program. Back DVD Viewdisc. and Control Connections Load / eject Insert the disc with the label side facing yourself Insert the disc with the label side facing yourself Back View andand Control Connections Back View Control Connections 7. USB: Connect to a portable USB storage device. DC IN: Main power input. 8. YPbPr: connect to the (component) output Headphone: Connect earphones. sockets of a DVD player. VGA: Connect to a PC’s PC-RGB output socket. PC Audio: Connect to a PC’s Audio output socket. 9. Coax: Connect to an external digital audio device. 10. Video: Connect to a DVD player’s VIDEO output RF: Connection for the antenna plug. socket. HDMI: Connect to the HDMI output socket of a 11. R/L: Connect to the R/LUSB AUDIO outputdevice. socket of a DVD player. DC IN: Main power input. 7. USB: Connect to portable storage DVD player. 1. 2. 3. 4. 5. 6. 1. 1. 2. 3. 4. 5. 6. 2. IN:Headphone: Connect YPbPr: Connect the (Component) output socket 7. 8. USB: Connect to atoportable USB storage device. DC Main power input. the earphone. 3. VGA: Connect to a PC’s PC-RGB output socket. of a DVD Player. 8. YPbPr: connect to the (component) output Headphone: Connect earphones. 4. PC Audio:to Connect to a PC’soutput Audio output Coax: Connect an external digital audio device. of a DVDtoplayer. VGA: Connect a PC’s PC-RGB socket.socket. 9. sockets 5. RF: Connection for the antenna plug. 10. Video: Connect to DVD player’s VIDEO output digital audio device. PC Audio: Connect to a PC’s Audio output socket. 9. Coax: Connect to ana external 6. HDMI: Connect to the HDMI output socket of a socket. 10. Video: Connect to a DVD player’s VIDEO output RF: Connection for the antenna plug. player.to the HDMI output socket of a 11. socket. R/L: Connect the R/L AUDIO output socket of DVD. HDMI:DVD Connect 11. R/L: Connect to the R/L AUDIO output socket of a DVD player. DVD player. 12 12 12 Basic Installation Basic Installation Basic Installation Power Cord Connection Power Cord Connection - Connect the power cord and power adaptor correctly as shown. Power Cord Connection - Connect the power cord and power adaptor correctly as shown. - Press the STANDBY switch of your LED TV to switch the unit on. The power indicator on the - Connect the powerswitch cord correctly as shown. - Press the STANDBY of your LED TV to switch the unit on. The power indicator on the front lightsup up green orLED blue. - Presspanel the STANDBY switch of your TV to switch the unit on. The power indicator on the front panel lights inin green or blue. front panel lights up in green. Antennas AntennasConnection Connection Antennas Connection ToToensure TVantenna antennasystem systemneeds needs installed. The antenna ensuregood goodpicture pictureand andsound, sound,aTV toto bebe installed. The antenna system which will willprovide provideservice servicefor for systemasasshown showncan canbe besourced sourcedfrom fromTV TVequipment equipment shops, shops, which To ensure good picture and sound, a TV antenna system needs to be installed. The correct installation and connections. After installation, insert the 75-OHM antenna plug intoantenna correct installation and connections. After installation, insert the 75-OHM antenna plug into the socket asasshown. system as shown can be sourced from TV equipment shops, which will provide service for theantenna antenna socket shown. correct installation and connections. After installation, insert the 75-OHM antenna plug into the antenna socket as shown. Basic Installation (Cont.) Basic Installation (Cont.) (Cont.) 13 13 13 AV Connection AV Connection Connection AV Connect the VIDEO and AUDIO output sockets of the DVD or VCR to the AV IN sockets on the Connect theRCA VIDEO and AUDIO output ofofthe DVD or VCR toto the AVAV IN IN socket on the TV using the cable (Yellow and Red [left and right audio]). Select the AV Connect the VIDEO and AUDIO[video],White outputsocket sockets the DVD or VCR the sockets on the set using the RCA cable (Yellow [video],White and Red [left and right audio]). Select the input source SOURCE on the remote TV using theusing RCA the cable (Yellowbutton [video],White and Redcontrol. [left and right audio]). Select theAV AV input source using the SOURCE button on the remote control. input source using the SOURCE button on the remote control. YPbPr YPbPrConnection Connection YPbPr Connection Connect the picture quality quality Connect theYPbPr YPbProutput outputofofthe theDVD DVDororVCR VCRto tothe theYPbPr YPbPrinput input on on the the TV. TV. The The picture isConnect improved compared totoconnecting aaregular VCR to the Connect the Audio the YPbPr output of the DVD or VCR to the inputinput. on the TV. Thethe picture quality is improved compared connecting regular VCR toYPbPr thevideo video input. Connect Audio output ofofthe DVD or VCR to the Audio input sockets on the set using the RCA cable isoutput improved compared to connecting a regular VCR to the video input. Connect the Audio the DVD or VCR to the Audio input socket on set using the RCA cable. Match output of the DVD or VCR to the Audio input sockets on the setwhite using the RCA the sockets’ colours: Y is green, Pb is blue, Pr is red. Audio left is Audio right red. (3.5mm plug-2 X RCA plug). Match the sockets colours: Y is green, Pb isand blue, Pr iscable red. in Audio Select YPbPr input source using the SOURCE button on the remote control. left is white and Audio red. Select YPbP input source the (3.5mm plug-2 X RCA right plug).inMatch the sockets colours: Y is using green,the Pb SOURCE is blue, Prbutton is red. on Audio remote control. left is white and Audio right in red. Select YPbP input source using the SOURCE button on the remote control. 1414 14 Basic BasicInstallation Installation(Cont.) (Cont.) Basic Installation (Cont.) VGA (PC) Connection VGA (PC) Connection VGA (PC) Connection Connect the RGB output ofofof the PC to the VGA on the set. Connect the AUDIO output Connect the RGB output the PC the VGAsocket socketon onthe theset. set. Connect the AUDIO output Connect the RGB output the PC totothe VGA socket Connect the AUDIO output of of the PC to the PC AUDIO socket on the set. Select the PC input source using the SOURCE of the thePC PCto tothe thePC PCAUDIO AUDIOsocket socketon onthe theset. set.Select Selectthe thePCPCinput input source using the SOURCE source using the SOURCE button on the remote control. buttonthe on the remote control. button remote control. Head PCPC Head DCDC IN IN phone VGA phone VGA Audio Audio RF RF HDMI HDMI USB USB YY Pb Pb Pr Pr HDMI Connection HDMI Connection HDMI Connection HDMI connection allows the user to transfer both audio and video control signals through HDMI connection audio and andvideo videocontrol controlsignals signalsthrough through HDMI connectionallows allowsthe theuser userto totransfer transfer both both audio one cable only. These signals are transferred in digital. one cable only. These one cable only. Thesesignals signalsare aretransferred transferred in in digital. digital. Head PC DC IN Head VGA PC phone Audio DC IN phone VGA Audio RF RF HDMI HDMI Y Pb Pr USB Y Pb Pr USB 1515 15 BasicInstallation Installation(Cont.) (Cont.) Basic Basic Installation (Cont.) CoaxConnection Connection Coax Connect theCoaxial Coaxial output the Coaxial (S/PDIF) input amplifier. Coax Connection Connect the output ofof the TVTV to to thethe Coaxial (S/PDIF) input on on thethe amplifier. YourYour amplifier must have the corresponding decoding functions to decode signal coming Connect the Coaxial output of the TV todecoding the Coaxial (S/PDIF)toinput on the thethe amplifier. Your amplifier must have the corresponding functions decode signal coming fromthe themust TV. have the corresponding decoding functions to decode the signal coming amplifier from TV. from the TV. Coax Coax Video Video R R L L USB USBConnection Connection A portable USB can bebe connected to to thethe USB socket. A portable USBdevice device can connected USB socket. USB Connection A portable USB device can be connected to the USB socket. DC IN DC IN Head PC phone VGA Audio Head PC phone VGA Audio RF RF HDMI HDMI Y USB USB Y Pb Pb Pr Pr 16 16 RemoteControl Control Remote Remotecontrol control instruction mode Remote instruction TV TV mode STANDBY: STANDBY: Press to turn the TV set on or off. SOURCE: Press to cycle through the input source. SOURCE: Press to cycle through the input source. PMODE: picture mode. PMODE:Select Select picture mode. SMODE: sound mode. SMODE:Select Select sound mode. AUDIO: Select different audio modes. AUDIO: SLEEP:Sets Setthe theTVTVsleep to sleep. SLEEP: time. MUTE:Press Press mute sound. or press V+ to MUTE: toto mute thethe sound. PressPress againagain or press V+ to un-mute the TV. unmute the TV. 0-9: number select. 0-9:TVTVchannel channel number select. -/-this button to enter a program number -/--: Press : Press this button to enter a program number for multiple for multiple program channel such as 2-1,etc. program channel such as 2-1,etc. : Return to the previous channel viewed. : Return to the previous channel viewed. FAV: Display your favourite channel list. FAV: Display your favourite channel list. MENU: Brings up the main menu to the screen. MENU: Brings up the main menu to the screen. EXIT: to close the EXIT:Press Exit the main TVon-screen menu todisplay. the screen. DISPLAY: Press to to display the the source and channel’s DISPLAY: Press display source and channel’s information. LANG information. / / / /OK : Allows you to move, select and setup / / options. / /OK : Allows you to move, select and setup the the OSD OSD options. VOL+/-: Volume up/down. VOL+/-: Press to increase/decrease the sound level. CH+/-: Channel up/down. CH+/-: Press to scan through channels. GVALEDC19J Remote (Cont.) Remote Control Control (Cont.) 17 17 Remote inTELETEXT TELETEXT mode Remotecontrol control instruction instruction in mode NUMBER BUTTONS: Press 0-9 to select a teletext NUMBER BUTTONE: Press 0-9 to select a teletext page. page. TEXT:Press Press switch between TV Teletext and Teletext TEXT: to to switch between TV and mode.mode. COLOUR BUTTONS: Select for Preferred TELETEXT COLOUR BUTTONS: Select 4 preferred teletext pages. page. HOLD: Freeze current page. HOLD: Freeze thethe current page. SIZE: Change the picture size. SIZE: Change the picture size. SUBTITLE: To display subtitle. SUBTITLE: Displays subtitles. INDEX: Request index page when index link is valid. INDEX: Request index page when index is valid. FREEZE:Reveal Reveal hide hidden words. FREEZE: or or hide thethe hidden words. ZOOM: this button to select the default screen size size ZOOM:Press Press this button to select the default screen on your TV. on your TV. * Teletext or Austext is no longer available, nor is there any plan a replacement teletext servicenor is there * Teletext or for Austext is no longer available, in Australia. For more information, please visit any plan for a replacement teletext service in Australia. the websites of the Australian channel providers. For moreone information, please visitcaptions”, the websites of the However, teletext option, “closed is still working on most Australian television channels. Australian channel providers. However, one teletext This service allows you to activate subtitles while option, “closed captions”,programs is still working on most watching normal television that provide it. Australian television channels. This service allows you LANG to activate subtitles while watching normal television programs that provide it. GVALEDC19J 18 16 RemoteControl Control (Cont.) Remote Remotecontrol control instruction in DTV mode Remote instruction TV mode STANDBY: NUMBER BUTTONS: Press 0-9 to select a channel. SOURCE: Press cycle through the inputchannel source. list. FAV: Press totodisplay your favourite PMODE: picture mode. MENU:Select Brings up the main DTV menu to the screen. SMODE: Select sound mode. DISPLAY: Press display the source and channel’s information. AUDIO: / / / /OK : Allows you to move, select and setup the SLEEP: Sets the TV sleep time. OSD option. CH+/-: Channel up/down. MUTE: Press to mute the sound. Press again or press V+ to un-mute the TV. COLOUR BUTTONS: Used in a few sub-menus. 0-9: TV channel number select. SUBTITLE: To display subtitle. -/-- : Press this button to enter a program number : PLAY/PAUSE in channel TIMESHIFT MEDIA mode. for multiple program suchand as 2-1,etc. Stop intoMEDIA modechannel or exit viewed. the REC mode. ::Return the previous : Fastyour reverse and channel forwardlist. key in MEDIA mode. FAV:/Display favourite / Brings : Jump to main previous next track in MEDIA mode. MENU: up the menuand to the screen. SIZE: Change thethe picture format. EXIT: Press to close on-screen display. EPG: Lanuches the EPG ( Electronic Program Guide). DISPLAY: Press to display the source and channel’s information. LANG MEDIA: Press to select MEDIA mode. /TV/Radio: / / /OK : Allows to Radio move, modes. select and setup Select you TV or the OSD options. (REC): Record the program in DTV mode. VOL+/-: Volume up/down. CH+/-: Channel up/down. GVALEDC19J Remote (Cont.) Remote Control Control (Cont.) 17 19 Remote inTELETEXT DVD mode Remotecontrol control instruction instruction in mode : PressBUTTONE: to eject the disc. NUMBER Press 0-9 to select a teletext page. NUMBER BUTTONS: Press 0-9 to select the DVD Chapter. TEXT: Press to switch between TV and Teletext mode. DISPLAY: Press to Select display the DVD teletext information COLOUR BUTTONS: 4 preferred pages.on DVD. D.SETUP: Press to access DVD setup menu. HOLD: Freeze the current page. / Change / / the /OK : Allows SIZE: picture size.you to move, select and setup the DVD option. SUBTITLE: Displays subtitles. GOTO: Press to access the GOTO menu. INDEX: Request index page when index is valid. A-B: This button enables you towords. repeat a selected section FREEZE: Reveal or hide the hidden ZOOM: Press this button to select the default screen size from the disc. on your TV. REPEAT: Press PEPEAT to cycle through the repeat play * options. Teletext or Austext is no longer available, nor is there any plan for a replacement teletext service inSUBTITLE: Australia. For information, Tomore display subtitle. please visit the websites of the Australian channel providers. However, one teletext “closed captions”, TITLE: When DVD isoption, playing, brings up theisTitle Menu. still working on most Australian television channels. This service allows to activate subtitles while D.MENU: Accessyou to DVD disc menu. watching normal television programs that provide it. AUDIO: AUDIO selection buttons in DVD mode. LANG : PLAY/PAUSE in DVD mode. : Stop DVD playing. / : Fast reverse and forward key in DVD mode. / mode. GVALEDC19J : Jump to previous and next track/chapter in DVD 20 20 Remote Remote Control Control Setup Setup 1. Open the cover. Openremote the cover. 2.1. Your requires 2X AAA Batteries. When inserting the batteries, make sure correct 2. polarity Your remote requires “-” 2Xon AAA inserting the batteries, make surethe correct marks”+”and theBatteries. batteriesWhen match the diagram as shown within battery polarity marks”+”and “-” on the batteries match the diagram as shown within the battery compartment. compartment. 3. Replace the battery cover. 3. Replace the battery cover. To prevent battery leakage which may result in bodily injury or damage to the remote: To prevent battery leakage which may result in bodily injury or damage to the remote: 1. Install all batteries correctly, and as marked on the remote control. 1. Install all batteries correctly, and as marked on the remote control. 2. Do not mix batteries: (OLD and NEW or CARBON and ALKALINE, etc) Remove batteries 2. Do not mix batteries: (OLD and NEW or CARBON and ALKALINE, etc) Remove batteries when the remote is not used for a long time. when the remote is not used for a long time. 3. Recommend using ALKALINE type batteries. 3. It is recommended that you use ALKALINE type batteries. 21 21 Basic BasicOperation Operation Selecting SelectingInput InputSource Source DVD Basic Operation Basic Operation Press SOURCE button on the remote control to display the input source list. Press SOURCE button on the remote control to display the input source list. Press / button to select the input source you want to watch. Press / button button select input source you want to watch. Press OK toto enter thethe input source. Press button to to enter PressOK EXIT button quit.the input source. Press EXIT button to quit. 22 22 Basic (Cont.) Basic Operation (Cont.) Picture Picture Menu Menu Press display the the main mainmenu. menu. Press MENU MENU button to display Press // button to select PICTURE ration Press PICTUREin inthe themain mainmenu, menu,ititwill willhighligh highlight the first operation. Cool Auto 1. 1.2. 2.3. 3. Press / button to select the option that you want to adjust in the PICTURE menu. Press buttonto toadjust. select the option that you want to adjust in the PICTURE menu. Press // button Press / button adjust. Press MENU button to return back to the previous Aft yourto adjustment, After finishing your adjustment, press MENU button to return back to the previous menu. menu. Picture Mode Picture Press / Mode button to select Picture Mode, then press OK button to enter sub-menu. Press Mode, thenmode: press OK buttonStandard,Mild,Personal). to enter sub-menu. Press // button buttontotoselect select.Picture (Available Picture Dynamic, Press / button to select. (Available Picture mode: Dynamic, Standard, Mild, Personal). You can change the value of contrast, brightness, color and sharpness when the picture is You can change the value contrast, brightness, color sharpness when picture in Personal mode. TIPS: Youofcan press PMODE button on and the remote control to the change the is in Personal mode. TIPS: You can press PMODE button on the remote control to change the Picture Mode directly. Picture Mode directly. Brightness Press / button to select Brightness,then press OK button to enter sub-menu. Press / Brightness button to Press / adjust. button to select Brightness, then press OK button to enter sub-menu. Press button to adjust. Contrast Press / button to select Contrast,then press OK button to enter sub-menu. Press Contrast button to Press / adjust. button to select Contrast, then press OK button to enter sub-menu. Press button to adjust. / / / 23 Basic Operation (Cont.) Sharpness Press / button to select Sharpness, then press / button to adjust. Saturation Adjust the saturation of the color based on your own preference. Hue Use in compensating colour changed with the transmission in the NTSC system. Colour Temp Press / button to select Color Temperature, then press Color Temperature: Normal, Cool, Warm). Aspect Ratio Press / button to select Aspect Ratio, then press Ratio: Auto, Zoom1, Zoom2, 4:3, 16:9). / / button to select. (Available button to select. (Available Aspect 24 24 Basic BasicOperation Operation (Cont.) (Cont.) Advanced AdvancedSettings Settings Medium NR(Noise NR(NoiseReduction) Reduction) Press / / button buttontotoselect selectNR(Noise NR(Noise Reduction),then Reduction), then press Press press // button buttontotoselect. select. (Available options: Off, Weak, Medium, Strong). MPEGNR(Noise NR(NoiseReduction) Reduction) MPEG Press / / button buttontotoselect selectMPEG MPEGNR(Noise NR(Noise Reduction),then Reduction), then press Press press // button buttontoto select. (Available options: Off, Weak, Medium, Strong). DynamicContrast Contrast Dynamic Press / / button buttontotoselect selectDynamic Dynamic Contrast,then Contrast, then press Press press // button buttontotoselect. select. (Available options: Off, Weak, Medium, Strong). ,Medium,Strong). 25 25 Basic Operation (Cont.) Sound Sound Menu Menu Press Press MENU MENU button button to to display display the the main main menu. menu. Press / button to select SOUND highlight the first option. Press / button to select SOUND in in the the main main men, menu,it itwill will highlight the first option. PCM 1. 2. 3. Press / button to select the the option option that that you you want want to to adjust adjustin inthe theSOUND SOUNDmenu. menu. Press / button to adjust. adjust. After finishing your adjustment, adjustment, Press press MENU MENUbutton buttonto toreturn returnback backto tothe theprevious previous menu. Sound Mode Press // button buttonto toselect selectSound Sound Mode, Mode, then then press press OK OK button buttonto toenter entersub-menu. sub-menu. to select. (Available Sound mode: Standard,Music,Movie,Personal). Press // button button to select. (Available Sound mode: Standard, Music, Movie, Personal). You can change the value of Treble Treble and and Bass Bass when when the the sound sound isis in in Personal Personalmode. mode. TIPS: You can press SMODE button on the remote control to change the Sound button on the remote control to change the SoundMode Modedirectly. directly. Treble Press // button buttonto toselect selectTreble,then Treble, thenpress pressOK OKbutton buttontotoenter entersub-menu. sub-menu.Press Press / / button to adjust. Bass Press Press // button buttonto toselect selectBass,then Bass, thenpress pressOK OKbutton buttontotoenter entersub-menu. sub-menu.Press Press / / button button to to adjust. adjust. 26 26 Basic Basic Operation Operation(Cont.) (Cont.) Balance Balance Press Press Press // button buttonto toselect selectBalance,then Balance, thenpress pressOK OKbutton buttontotoenter entersub-menu. sub-menu. Press / / button buttonto toadjust. adjust. Surround SurroundSound Sound Press / button to select OnOff. or Press // button buttonto toselect selectSurround SurroundSound Sound,,then thenpress pressPress / button to select On or O . EQ Setting EQ Setting Press / button to select EQ Setting, then press OK / Press / button to select EQ Setting, then Press Entre / AVL (Auto Volume Level) AVL Press Press / / button to select AVL, then press Press / button to select AVL ,then press Press / S/PDIF SPDIF Press / button to select S/PDIF, then press Press / Press / button to select SPDIF ,then press Press / AudioDescription Description Audio Press // Press submenu. button to enter submenu. button to enter submenu. button to select On or Off. button to select Off, Auto, PCM. buttonto toselect selectAudio AudioDescription, Description,then thenpress pressEnter OK / / button button buttontotoenter entersubmenu. 27 Basic (Cont.) BasicOperation Operation (Cont.) Audio Description Audio/ Description button to select Audio Description, then press / Press Press / button to select Audio Description, then press button to select. / button to select. Sound Type Press / button to select Sound Type, then press / button to select sound type Sound Type options (Available sound type: Stereo, Dual l, Dual II, Mixed). Press / button to select Sound Type, then press (Available Sound Type: Stereo, Duall, Dual ll, Mixed.) / button to select . 27 28 2828 Operation (Cont.) Basic Basic BasicOperation Operation (Cont.) (Cont.) Channel Menu Channel Channel Menuto display the main menu. Press MENUMenu button Press / Press MENU buttontotodisplay displaythe themain mainmenu. menu. Press MENU button Press / / button to select CHANNEL in the main menu, it will highlight the first option. Press 1. 2.1. 3.2. 3. Press / button to select the option that you want to adjust in the CHANNEL menu. 1.Press Press/ / /button button selectthe theoption option that you menu. Press button select you want wantto toadjust adjustininthe theCHANNEL CHANNEL menu. tototo adjust. 2. Press Press / / button buttontotoadjust. adjust. 3. After finishing your adjustment, press MENU button to return back to the previous menu. Auto Scan Auto Scan Press / button to select Auto Scan, then press Enter / button to enter submenu. (The Auto/Scan Press button to select Auto Scan, then press Enter / button to enter submenu. (The default password is 0000) Press / button to select Auto Scan, then press Ok / button to enter submenu. (The default password is 0000) default password is 0000) Country Australia Australia 29 Basic Operation (Cont.) Manual Scan Press / button to select Manual Scan, then press Ok / Digital Manual Scan Press / button to enter submenu. button to select Digital Manual Scan, then press Ok / button to enter submenu. 30 Basic30Operation (Cont.) Basic Operation (Cont.) Analog Manual Scan Press / Analog button to select Manual ScanAnalog Manual Scan, then press Enter / button to enter submenu.Press / button to select Analog Manual Scan, then press Ok / button to enter submenu. 31 31 Basic Basic Operation Operation (Cont.) Channel ChannelEdit Edit Press Press // button buttonto toselect select Channel Channel Edit, Edit, then press Ok OK // button button to enter submenu. Thethree three colored colored keys key isare thethe shortcut keykeys for programming the channel. The shortcut for programming the channel list. First press / to highlight the channel you want to delete or move or skip, then: First press / to highlight the channel you want to delete or move or skip, then: Press the Red button to delete the channel. Pressthe theRed Green button to skip the the channel. select channel. Press button to delete (Your TV set will skip the channel automatically when using CH+/- to view the channels.) Press the Green button to skip the select channel. / the to move it to the PressTV theset Blue to channel set the channel to moving state, then pressto view (Your willbutton skip the automatically when using CH+/channels.) position you want to put. Press the Blue button to set the channel to moving state, then press / to move it to the position you want to put, then press the blue button again to confirm the position. 32 32 Basic BasicOperation Operation (Cont.) (Cont.) Signal SignalInformation Information Press press Ok OK/ / button buttontotoselect selectthe the Press / / button buttontotoselect selectSignal SignalInformation, Information, then then press detail information about the the signal. Only available when there is is signal detailed information about signal. Only available when there signalunder underDTV. DTV. 33 33 Basic Basic Operation Operation (Cont.) (Cont.) Lock LockMenu Menu Press PressMENU MENUbutton buttonto todisplay displaythe the main main menu. menu. Press Press // button buttonto toselect selectLOCK LOCKin in the the main main men, menu,it itwill willhighligh highlight the first option. No Block 1. Press / button to select the option that you want to adjust in the LOCK menu. 1. Press / button to select the option that you want to adjust in the LOCK menu. (Default Password:0000) (Default Password: 0000) 2. Press / button to adjust. 2. Press / button to adjust. your adjustment, Press MENU button to return back to the previous 3. Aft 3. After finishing your adjustment, press MENU button to return back to the previous menu. menu. Enter Password Enter Password Press / button to select Enter Password, then press OK button to make the following 4 Press / button to select Enter Password, then press OK button to make the following 4 options valid. (Default password is ‘0000’.) options valid. (Default password is ‘0000’.) Enable Enable Press Press // button buttonto toselect selectEnable,then Enable, thenpress pressPress Press // button buttonto to select select On On or or O Off.. Channel Locks,Parental andRating Lock Keypad available Enable is Enable On Channel Locks,Rating Parental and Lockare Keypad are when available when is On. Channel ChannelLocks Locks Press Press // button buttonto toselect selectChannel Channel Locks, Locks, then then press press OK Ok // button to to enter entersubmenu. submenu. button 34 34 Basic Basic Operation Operation (Cont.) (Cont.) Parental Rating Press / Rating button to select Parental Rating , then press / Parental Press / button to select Parental Rating, then press / button to select. button to select. Lock Keypad Set to Keypad prevent it from being used by young children, or other unexpected usage. Lock Press / button to being select used Lock by Keypad , then pressor other / button to select On or Off.. Set to prevent it from young children, unexpected usage. Press / button to select Lock Keypad, then press / button to select On or Off. 3535 Basic Operation (Cont.) Basic Operation (Cont.) Hotel Mode Hotel Mode to enter submenu. / button to select Mode, / button PressPress / button to select HotelHotel Mode, thenthen presspress Ok /OKbutton to enter submenu. Password NewNew Password Press / button to select New Password, then enter a 4 digit number you want to set as Press / button to select New Password, then enter a 4 digit number you want to set as rm new password. password. Repeat 4 digital number to c password. Repeat 4 digit number to confirm new password. Clear Lock Clear Lock Press / button to select Clear Lock, then press / button to select. Press / button to select Clear Lock, then press / button to select. NOTE: The default password is “0000” (Administrator password is “4711”). NOTE: The default password is “0000” (Administrator password is “4711”). 36 Basic Operation (Cont.) 36 36 Basic Operation (Cont.) (Cont.) Basic Operation Setup Menu Press MENU button to display the main menu. Setup Menu Setup Menu Press / PressMENU MENUbutton buttontotodisplay displaythe themain mainmenu. menu. Press Press / button to select SETUP in the main menu, it will highlight the first option. Press / Blue Screen Blue Screen HDMI CEC Control PVR Settings HDMI CEC Control PVR Settings Off Off OSD Language OSD Language Press / button to select OSD Language, then press OK button to enter submenu. OSD Language Press / / / button to select OSD Language, then press OK button to enter submenu. / button toOSD select OSD language. Press Press / button to select Language, then press OK button to enter submenu. Press / / / button to select OSD language. Press / / / button to select OSD language. Auto Language Auto Language Auto Press Language / button to select Auto Language, then press Enter button to enter submenu. Press / button to select Auto Language, then press Ok button to enter submenu. Press / button to select Auto Language, then pressLanguage Enter button toAudio enter Secondary submenu. select theAudio Audio Primary and Press Press / / / / // button button to to select the Primary Language and Audio Secondary / / / button to select the Audio Primary Language and Audio Secondary Press Language. Language. Language. BasicOperation Operation (Cont.) (Cont.) Basic Basic Operation Basic Operation (Cont.) Subtitle Subtitle Subtitle Press / button to select Subtitle, then press OK button to enter submenu. Subtitle Press press Ok OKbutton buttonto toenter entersubmenu. submenu. Press // button buttonto toselect select Subtitle, Subtitle, then press Press / button to select Subtitle, then press OK button to enter submenu. Teletext Teletext Teletext Adjust Teletext Teletext settings. settings. Only Only available available under under DTV DTV and and ATV ATV source. source. Teletext Adjust Adjust settings. OnlyTeletext, available under DTV and ATV source. Press Teletext button to select select then press OKand button toenter entersubmenu. submenu. Adjust Teletext settings. OnlyTeletext, available under DTV source. Press // button to then press Ok // ATV button to Press / button to select Teletext, then press OK / button to enter submenu. Press / button to select Teletext, then press OK / button to enter submenu. Under Under DTV DTV source, source, press press Under ATV source, press Under DTV source, press Under ATV source, press Under DTV source, press Under press Under ATV ATV source, source, press // button button to to select select Digital Digital Teletext Teletext Language. Language. button to Decoding Page Language. /// button button to select Digital Teletext Language. button to select Decoding Page Language. select Digital Teletext Language. button to to select select Decoding DecodingPage PageLanguage. Language. // button Blue Screen Blue Screen Blue PressScreen / button to select Bule Screen , then press Blue Screen /// / button to select Blue Screen, then Press / / button to select On or Off. button to select Bule Screen , then press button to select Bule Screen , then press / Press Press // button Time Setting, then then press pressOK OKbutton buttonto toenter entersubmenu. submenu. buttonto toselect selectTime Time Setting, Ok button to enter submenu. Press Press Press Time Setting Time Press Setting / button to select Time Setting, then press OK button to enter submenu. Time Setting 37 37 37 37 38 37 Basic Operation (Cont.) Basic Operation (Cont.) HDMI CEC Control HDMI Control Press / CEC button to select HDMI CEC Control, then press OK button to enter submenu. Press / button to select HDMI CEC Control, then press OK button to enter submenu. HDMI CEC Control HDMI CEC Control Press / / button button to select HDMI Control , then press Press to select HDMI CECCEC Control, then press / make the following 3 options valid. the following 3 options valid. ARC(Audio ReturnChannel) Channel) ARC (Audio Return Press to select ARC, then press Press / / button button to select ARC , then press/ to select to / button button to select ON toON make button to select On or Off. / CEC Menu Control CEC Menu Control Press / button to select CEC Menu Control, then press OK / button to enter submenu. Press / button to select CEC Menu Control , then press OK / button to enter submenu. Home Menu Home menu When selecting this, TV will will show the Home Menu of connected CEC equipment. When selecting this,TV show the Home menu of connected CEC equipment . Option Option When selecting this, TV will will show the Option menu of connected CEC CEC equipment. When selecting this,TV show the Option menu of connected equipment . Content Content When selecting this,TV show the Disc menu of connected equipment . When selecting this, TV will will show the Disc menu of connected CEC CEC equipment. Device List Device List Press toto select Device List, then press OK /OK / button to enter submenu. This Press / / button button select Device List , then press button to enter submenu. menu shows all the CEC devices that’s connected with the TV. Users can refresh the CEC This menu show all the CEC device name which connected with TV, users can refresh the device list by access this menu, or choose a CEC device from the list. CEC devise list access this menu, or choose a CEC device. 38 38 38 PVR and Timeshift Operation 39 PVR Setting PVR Operation PVRand andTimeshift PVR and Timeshift Press / buttonOperation to select PVR SETTING, then press OK button to enter submenu. It w PVR Setting PVR Setting PVR Setting check the USB. Press / // button buttonto toselect selectPVR PVR SETTING, SETTING, then Ok toto enter submenu. ItIt will Press thenpress pressOK OKbutton button enter submenu. It will Press button to select PVR SETTING, enter submenu. will check the USB. check the USB. check the USB. First Time Setup First FirstTime TimeSetup Setup Press / button to select First Time Setup, then press OK button to enter. (Default Password is 0000). First Time Setup Press enter. (Default (Default Press // button button to to select select First First Time Time Setup, then press OK Ok button to enter. Press / isbutton Password Password is0000). 0000).to select First Time Setup, then press OK button to enter. (Default Password is 0000). Reset Reset Reset Press / button to select Reset, then press OK button to enter. Select “Yes” if you are sure to reset. Press / button to select Reset, Select “Yes” if you are sure to reset. Press / button tosure select Reset, then press OK button to enter. Select “Yes” if you are to reset. Press / button to select Reset, then press OK button to enter. Reset then press Ok button to enter. Select “Yes” if you are sure to reset. Software Update (USB) Use / the button to select this option, then press OK button to update software using USB. 40 and Timeshift Operation (Cont.) PVR 39 PVR and Timeshift Operation (Cont.) USB Device Setup Before use the Recording USB Device Setup and Timeshift functions, you should insert an USB device and format it, in the USB Host port the connection of theinsert TV set. Before use the Recording andatTimeshift functions,panel you should a USB device and format it in the USB Host port at the connection panel of the TV set. IMPORTANT: The setup will format the USB device, therefore all the data stored in the device IMPORTANT: The setup will format the USB the device, therefore all the data storedtoinyour the device will be lost. We strongly recommend to save content of your USB device PC will be lost. We strongly recommend to save the content of your USB device to your PC before starting configuration. before starting configuration. Press MENU button to access the PVR SETTINGS menu under the SETUP submenu. Use the Press MENU button to access the PVR SETTINGS menu under the SETUP submenu. Use the / buttons and then press OK button to select and access the DEVICE LIST interface. / button and then press OK button to select and access the DEVICE LIST interface. Follow the next steps to format the USB device: Follow the next steps to format the USB device: UsesUse/ / button totoselect thatyou youwish wish use Recording button selectthe thedisk disk partition partition that toto use forfor Recording andand Timeshift Timeshift functions, and then press the RED button to start formatting the selected partition. functions, and then press the RED button to start formatting the selected partition. WaitWait untiluntil thethe process ends and buttontotoexit exitthe thesettings settings menu. process ends andthen thenpress pressthe the EXIT EXIT button menu. TheThe USBUSB device willwill be ready to to start using Timeshiftfunctions. functions. device be ready start usingthe theRecording Recording and and Timeshift 41 40 PVR and Timeshift Operation (Cont.) PVR and Timeshift Operation (Cont.) Timeshift Timeshift Using Timeshift function you will be able to pause a live broadcast and move backwards and Using Timeshift function you will be able to pause a live broadcast and move backwards and forwards in the TV transmission. forwards in the TV transmission. To start the Timeshift function press PLAY/PAUSE button on the remote control. The image To freeze start the Timeshift function presstoTIMESHIFT button onThe theavailable remote control. The image will will and the buffer will start store information. buffer time will depend on the quality of the broadcasting and the free space on the USB device. the quality of the broadcasting and the free space on the USB device. Press PLAY button to start viewing the programme from the point it was paused, and use the Press PLAY button to start viewing the programme from the point it was paused, and use the remote keys assigned to playback mode to perform playing functions such as fast forward, remote keys assigned to playback mode to perform playing functions as fast forward, rewind, rewind, pause, etc. pause, etc. When Timeshiftmode, mode,the thefollowing followinginformation information will displayed Whenwatching watchingaaTV TVprogram program in in Timeshift will bebe displayed on onthe thescreen: screen: 00:03:46 00:06:48 Play FB FF Prev. Next Stop Available Time 00:55:27 / 01:00:35 The progress bar, on top of the information window, shows in blue color the elapsed time, The progress bar, on top of the information window, shows in blue color the elapsed time, and in white color the remaining program time stored. At the right side of the progress bar it and in white color the remaining program time stored. The current playing time and the total is displayed the current playing time, and the total time stored. Below is displayed the total time stored are displayed at the right side of the progress bar. The total buffer available time is displayed below. To finish Timeshift function, press STOP button, or just switch to another channel. PVR and Timeshift Operation (Cont.) 42 41 PVR and Timeshift Operation (Cont.) PVR and Timeshift Operation (Cont.) Instant Recording Using Recording function you will be able to record from the DTV input. Instant Recording To start the Recording function press REC button in the remote control and the unit will start Instant Recording Using Recording function you will be to record from the DTV input. recording the current programme. Theable following information will be displayed at the left Using Recording function you will be able to record from the DTV input. upper side of the screen: To start the Recording function press REC button in the remote control and the unit will start To start the Recording function press REC button on the remote control and the unit will start recording the current programme. The following information will be displayed at the left recording the current programme. The following information will be displayed at the left upper side of the screen: upper side of the screen: In this interface, the time already recorded and the total recording time available in Recording function, press STOP button, or just the USB disk are displayed. T switch to another channel. thisinterface, interface, the already recorded and the time available the USB in InInthis thetime time already recorded andtotal therecording total recording time in available disk are disk displayed. To finish Recording function, pressfunction, STOP button, or just switch to another Recording press STOP button, or just the USB are displayed. T Timer Recorder channel. switch to another channel. Press the REC button to schedule the recording of the programme selected at the programmes list. TimerRecorder Recorder Timer Follow theREC on-screen chooseofthe and vary the Press the button toinstructions schedule the to recording the recording programmefrequency, selected at the EPG Press the REC button to schedule the recording of the programme selected atvary the programmes list. Follow theand on-screen instructions choose the wish. recording frequency, channel and the starting ending date andtotime if you Press the MENU programmes list.adjust the start and end date and time if you wish. Press the MENU button to the channel and button to return to the previous window, or press the EXIT button to leave the Follow the on-screen instructions tothe choose the recording frequency, return to the previous window, or press EXIT button to leave the interface. and vary the interface. channel and the starting and ending date and time if you wish. Press the MENU button to return to the previous window, or press the EXIT button to leave the interface. 43 PVR and Timeshift Operation (Cont.) Playlist Press / buttons to choose the File Manager and press OK and press to access. Follow the Press MENU button to access the PVR SETTINGS menu under the SETUP submenu, from this on-screen instructions to recorded play the TV programs as stored. thethe MENU button to return to menu you may play the TV programs, well asPress access scheduled recordings thelist. previous window, or press the EXIT button to leave the interface. 42 PVR and Timeshift Operation (Cont.) Playlist Press / buttons to choose the File Manager and press OK to access. Follow the on-screen Press MENU button access the PVR SETTINGS menu under theOK SETUP submenu,from this Press / buttons to choose the Scheduled Record and press press to access. Use instructions to playto the TV programs stored. Press the MENU button toand return to the previous menu may play the recorded TV programs, as well as access the scheduled recordings thewindow, /youbuttons to choose a group and follow the on-screen instructions to schedule a or press the EXIT button to leave the interface. list. recording. Press the MENU button to return to the previous window, or press the EXIT button to leave the interface. Press / buttons to choose the Scheduled Record and press OK to access. Use the / buttons choose to a group and follow the on-screen to press schedule a recording. / tobuttons choose the File Manager and instructions press OK and to access. Follow the Press Press theinstructions MENU button return previousstored. window, or press the EXIT buttontotoreturn leave to on-screen toto play the to TVthe programs Press the MENU button interface. thethe previous window, or press the EXIT button to leave the interface. 44 43 EPG EPG (Electronic (Electronic Program Guide) EPG EPGFunction Function-Electronic -Electronic Programme Programme Guide Let Letsyou youcheck checkinformation informationabout aboutbroadcasting broadcastingprogrammes programmeson onthe thescreen screen(schedules, (schedules, programmes, programmes,contents contents description...) description...) as as well well as schedule recordings and reminders. Press displayed at at PressEPG EPGbutton buttonin inthe the remote remote control control unit, unit, and the following interface will be displayed the thescreen: screen: Press the BLUE button to schedule a reminder for the programme selected at the Press the BLUE button to schedule a reminder for the programme selected at the programmes list. Some seconds before the beginning of the programme, on the screen will programmes Someadvising seconds before the beginning of the programme, at the be displayed alist. message that the channel is near to be switched. screen will be displayed a message advising that the channel is near to be switched. Follow the on-screen instructions to choose the reminding frequency, vary the channel, Follow thestart on-screen instructions the the reminding frequency, and the adjust the / end date and time if to youchoose wish. Press OK button to return to thevary previous window, or press the EXIT button to leave the interface. channel and the starting and ending date and time if you wish. Press the OK button to return to the previous window, or press the EXIT button to leave the interface. Press the REC button to schedule the recording of the programme selected at the programmes list. Press the REC button to schedule the recording of the programme selected at the programmes list. Follow the on-screen instructions to choose the recording frequency, vary the channel, adjust the start / end date and time if you wish. Press the MENU button to return to the previous Follow on-screen instructions to choose the recording frequency, and vary the window,the or press the EXIT button to leave the interface. channel and the starting and ending date and time if you wish. Press the MENU button to return to the previous window, or press the EXIT button to leave the interface. 45 ATV / HDMI / AV / YPbPr / PC 1. 2. 3. 4. 5. PC Setting in PICTURE menu is available in PC Input only. Screen Mode in PICTURE menu and HDMI CEC Control in SETUP menu is available in HDMI Input only. Audio Description and Sound Type in AUDIO menu is valid only in DTV mode. HDMI/AV/YPbPr/PC mode has no CHANNEL menu. Parental Rating and Channel Locks in PARENTAL CONTROL menu is invalid for HDMI/ AV/YPbPr mode. Parental Rating is invalid for ATV mode. PC mode has no PARENTAL CONTROL menu. Audio Languages, Subtitle and PVR Settings in SETUP option are invalid for AV/PC mode. Audio Languages, Subtitle, Teletext PVR Settings in SETUP option are invalid for HDMI/ YPbPr mode. 46 Multi-Media Menu Operation Multi-Media Operation 45 Beforeoperating operatingUSB USBmenu, menu,Plug plugin inUSB USB device, device, then Before operating USB menu, Plug in USB device, then thenpress pressSOURCE SOURCEbutton buttontoto toset setthe theInput Input Before press SOURCE button set the Input Source to USB. Press / button to select USB in the Source menu, then press Ok button to Source to to USB. USB. Press Press // button button to to select select USB USB in in the the Source Source menu, menu, then then press press Enter Enter button button Source enter. to enter. enter. to Press / button to select the option you want to adjust in the main USB manu, then press Ok button to enter. Press // button button to to select select the the option option you you want want to to adjust adjust in in the the main main USB USB manu, manu, then then press press Press Photo OK button to enter. OK button to enter. Press / button to select PHOTO in the main menu, then press OK button to enter. Photo Photo Press / button to select drive disk you want to watch, then press OK button to enter. Press / button to select folder or file you want to watch, then press OK button to confirm. Press button to select PHOTO in the the main main menu, then then press press OK OK button button to to enter. enter. Press // button button in menu, Press Exit toto goselect back PHOTO to the previous menu. Press // Press Press // Press button to to select select drive drive disk disk you you want want to to watch, watch, then then press press Enter Enter button button to to enter. enter. button button to to select select return return option option to to back back to to the the previous previous menu. menu. button Multi-MediaMenu MenuOperation Operation(Cont.) (Cont.) Multi-Media Multi-Media Menu Operation (Cont.) 45 47 45 Music Music Music Press / button to select MUSIC in the main menu, then press OK button to enter. Press / button to select MUSIC in the main menu, then press OK button to enter. Press // button theyou main menu, then press OKpress button enter. to enter. Press buttontotoselect selectMUSIC drivein disk want to watch, then OKtobutton Press // button to select selectdrive drivedisk diskyou youwant want to watch, then press OK button to enter. Press button to to watch, then press OK button to enter. Press / button to select folder or file you want to watch, then press OK button to confirm. Press // button to select selectreturn returnoption optiontoto back to the previous menu. Press button to back to the previous menu. Press Exit button to go back to the previous menu. When highlighting you select, thethe filefile information will appear on the When highlightingthe theoption option you select, information will appear onright. the right. When highlighting the option you select, the file information will appear on the right. Movie Movie Movie Press / button to select MOVIE in the main menu, then press OK button to enter. Press / button to select MOVIE in the main menu, then press OK button to enter. Press // button button to drive diskinyou want tomenu, watch,then thenpress pressOK OK button to Press totoselect select MOVIE main toenter. enter. Press / button buttonto selectreturn driveoption diskthe you want tothe watch, thenmenu. pressbutton OK button to enter. Press / select to back to previous Press disk youyou want to watch, then press OK OK button to enter. Press / / button buttontotoselect selectdrive folder or file want to watch, then press button to confirm. Press / button to select return option to back to the previous menu. Press Exit button to go back to the previous menu. 48 Multi-Media Menu Operation(Cont.) (Cont.) Multi-Media Menu Menu Operation Operation Multi-Media (Cont.) 47 47 Text Text Text Press then press pressOK OKbutton buttontotoenter. enter. Press / / button buttontotoselect selectTEXT TEXTin inthe the main main menu, then Press // button to select TEXT in theyou main menu, then press OK button to enter. Press button to select drive disk want to watch, then press OK button enter. Press / button to select drive disk you watch, then press OK button totoenter. Press / button to select drive disk you want to watch, then press OK button to enter. Press to back previous menu. Press / / button buttontotoselect selectreturn folder option or file you wantto to the watch, then press OK button to confirm. Press Press / button to select return option to back to the previous menu. Exit button to go back to the previous menu. When highlighting formationwill willappear appearon onthe theright. right. When highlightingthe theoption optionyou youselect select, the file information When highlighting the option you select formation will appear on the right. 49 48DVD Function General Setup Page DVD Function Press the D.SETUP button and then press the / button to display the system setup menu page when in DVD mode. Press / button to move the highlight to select the following option. Press the button to enter the following menu and use the / button to select a menu item. Press the OK button to confirm. Press button to go back to the previous menu level. Press the D.SETUP to exit the DVD setup menu. 50 DVD Function (Cont.) 49 Audio Setup Page Press the D.SETUP button and then press / to display the audio menu page when in DVD mode. Press / button to move the highlighted to select the following option. Press button to enter the following menu and use the / button to select a menu item. Press the OK button to confirm. Press button to go back to the previous menu level. Press the D.SETUP to exit the DVD setup menu. Preference Page Press the D.SETUP button and then press / button to display the preference page when in DVD mode. Press / button to move the highlight to select the following option. Press button to enter the following menu and use / button to select a menu item. Press the OK button to confirm. Press button to go back to the previous menu level. Press the D.SETUP to exit the DVD setup menu. 50 51 DVD Function (Cont.) PAL Multi NTSC (The default password is 0000.) (The administrator password is 4711.) 52 Specifications MODEL GVALEDC19J Panel System 18.5” (47cm) HD LED panel Display Resolution 1366 x 768 Television System PAL Aspect Ratio 16:9 Display Colours 16.7M Colours Contrast 1000:1 Viewing Angle 170 (H) / 160 (V) Backlight Life 50,000 hours Pixel Pitch 0.3 (H) x 0.3 (V) Response Time 5ms HDMI Input 1 Speaker consumption L/R 2x3W Voltage DC12V 3A Rated Power consumption 20W This manual is only for your reference, any change to the design and specification will not be advised. 52 52 Wall Mounting Instructions 52 Wall Instructions Wall Mounting Instructions Attaching the base Wall Mounting Instructions Attaching Attaching the base 53 Place the advice face down on a protective surface. Place the stand on the neck of the TV and Place the the advice screen on aa protective surface. the stand on ofof the TVTV Place down on(found protective surface.Place Place thein stand onthe theneck neck the and insert and tightenface thedown screws inthe thebase accessories box) the circled area with the screw Attaching and insert metal disc and tighten the screws (found in the accessories box) in the circled area insertprovided. and tighten the screws (found in the accessories box) in the circled area with the screw drive Place the advice face down on a protective surface. Place the stand on the neck with the screw drive provided. drive provided. insert and tighten the screws (found in the accessories box) in the circled area w drive provided. Remove the Stand Remove the the Stand Remove . To remove theStand stand, remove the screws in the circled area and the neck will c To remove the stand, remove the screws in the circled area and the neck will come off. . To remove the stand, remove the screws in the circled area and the neck will c Remove the Stand To remove the stand, remove the screws in the circled area and the neck will c Wall-mounting the Device Wall-mounting Device Wall-mounting the the Device Wall-mounting the Device If you are mounting the device, please consult a qualified installer for further instructions on bracket support and wall support. Mount Specification: 100 mm x 100 mm using screw size M4 (not supplied). Length of screw should not exceed 10 mm. note: The 10 mm length of screw refers to for future instructions on IfPlease you are mounting the device, place c how deep the screw can go inside the mounting for future instructions on If you are mounting place c bracket support andthe walldevice, support. holes. bracket support and wall support. for future instr If you are mounting the device, place c Moun ation: 100mm x 100mm using screw size M4 (not supplied). Length of screw bracket support and wall support. When you are buying screws, you should add the original 10mm the thickness of your Moun ation: 100mm x 100mm using screw size M4 (notto supplied). Length of screw should not exceed 10mm. mounting plate in order to get the total screw length. shouldnote: not exceed 10mm. Please The 10mm length of screw refers to 100mm how deep the screw canscrew go inside the (not supplied). Leng Moun ation: x 100mm using size M4 Please note: The 10mm length of screw refers to how deep the screw can go inside the mounting holes. should not exceed 10mm. mounting holes. Please note: The 10mm length of screw refers to how deep the screw can go ins When you are buying screws, you should add the original 10mm to the thickness of your mounting holes. When you plate are buying screws, add the original 10mm to the thickness of your mounting in order to getyou theshould total screw length. mounting plate in order to get the total screw length. -Reinstall your PC video card if the signal source is from your computer. 54 Maintaining your TV Care andyour Maintenance If you clean TV carefully and regularly, it helps your TV to last longer. Ma you turn the power off and unplug the power cord on your TV before you begin clean it. your TV Maintaining If you clean your TV carefully and regularly, it helps your TV to last longer. Make sure you turn the power off and unplug the power cord on your TV before you begin to clean it. Cleaning the screen Cleaning the screen 1 . Here's a great way to keep the dust off your screen. Wet a soft cloth in a mi 1. lukewarm Here’s a great way to keep off your screen.ofWet a soft cloth in a mixture of water andthe a dust small amount fabric softener or washing-up liquid. lukewarm and a small amount fabricthen softener or washing-up Wring the the clothwater until it's almost dryofand use it to wipeliquid. the screen. cloth until it’s almost dry and then use it to wipe the screen. 2 . Make sure there is no excess water on your TV when you have finished clea 2. Make sure there is no excess water on your TV when you have finished cleaning it. Cleaning the parts plastic parts Cleaning the plastic of your TV of your TV Wipe the plastic parts of your TV with a soft, dry, lint-free cloth. Do not use a wet cloth. Wipe the plastic parts of your TV with a soft, dry, lint-free cloth. Do not use a w If you are going to be away for a while If you are going to be away for a while If you are not going to use your TV for a while (such as when you go on holiday), you should unplug the power cord from the socket and disconnect your aerial to If you are going to use your for a or while protect your TV not against possible damage fromTV lightning power(such surges. as when you go o holiday), you should unplug the power cord from the socket and disco your aerial to protect your TV against possible damage from lightning power surges. 36 55 FAQs Problem Action No picture, no sound 1. 2. 3. Normal Picture, but no sound 1. 2. 3. Remote control does not work 1. 2. 3. 4. TV turned off suddenly 1. 2. 3. Picture appear slowly after TV switched on Check that you have connected the TV power cord properly and switched the wall socket on. Check that you have turned on the POWER button on your TV. Check the picture contrast and brightness setting. Check that your TV is not muted or has the volume down. Switch the channel, the problem may be with the channel you’re on, not the TV. Check that your audio cable input has been plugged in properly, if you are using an external amplifier. Check to see if there is any object between your TV (such as a piece of furniture) that could block the remote control from connecting with the sensor on your TV. Have you put the batteries into the remote control the right way? ( + to + and - to -) Check that the TV is not positioned in bright sunlight. Try fitting new batteries if none of the above work. Check that you have not set the sleep timer. Check that you have not set the timer to control the socket which has your TV power cord on. Check that you have not set auto standby with the broadcast signal source which is connected to your TV. This is normal. The image takes a few seconds to appear after you have switched the TV on. Please contact your service centre if picture has not appeared after five minutes. 56 FAQs Problem Action No Colour, poor quality colour, poor quality image 1. 2. 3. 4. 5. 6. Horizontal and Vertical lines on the screen in PC mode 1. 2. Poor reception 1. 2. 3. Change the colour setting on the PICTURE MENU. Keep a distance between your TV and any VCR you may be using Try watching another channel. The problem may be with the channel you’re watching. Are the video cables installed properly? Change the setting of picture brightness on PICTURE MENU. Reinstall your PC video card if the signal source is from your computer. Check if any signal interference activities is going on nearby, such as an electrical appliance or power tool is in operation. Turn on the auto configure or change the horizontal or vertical frequency position. The TV channel you’re watching may be having problems. Change to another channel and see if the same is happening. TV broadcasting signal is weak or has been interrupted. Check whether signal sources have any possible interference. Lines and streaks on the picture Check if there is any damage to the aerial on the roof, try to change the direction of the aerial to receive a better signal. TV Speak has no sound Check the sound balance setting on SOUND MENU. The signal is out of range 1. 2. 3. Change the resolution,horizontal or vertical frequency of your source (PC etc.). Check whether the signal cable is connected from the PC to your TV properly. Check the signal input source is connected properly. 57 Notes 58 Notes 59 Notes
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- 32-inch HD LED LCD display
- TV, DVD player, and multimedia player in one
- HDMI CEC control for easy integration with other devices
- PVR and Time Shift capabilities for recording and pausing live TV
- Built-in USB port for connecting USB drives and playing multimedia content
Related manuals
Frequently Answers and Questions
Can the TV connect to the internet?
Does the TV have built-in speakers?
What is the refresh rate of the display?
advertisement