Axiomtek eBOX640-500-FL Fanless Embedded System Quick Manual

Installation of Express Mini Card

Step 1 Turn off the system, and unplug the power adaptor.

Step 2 There are eight screws on the top heatsink are used to fasten the heatsink to the chassis.

Step 3 Remove the top cover.

Step 4 Locate Express Mini card slot within the red line marked.

Step 5 Slide Mini Card into Mini Card slot with caution and fasten screw of Express Mini Card.

Step 6 Assembly the top cover back and fasten all screws.

Note: Please refer to the user’s manual to get more detail information.

4 ©Copyright 2017 Axiomtek Co., Ltd.

Version A1 Jan 2017

Printed in Taiwan

9416K640000E

eBOX640-500-FL Quick Installation Guide

Packing List

System Unit x 1 DVD/CD x 1 (for Driver & Manual)

Quick Installation Guide x 1 Screw pack x 1

3-pin phoenix type connector

(P=3.81mm) x 1

HDD bracket x 2

Foot pad x 4 Thermal Grease x 1

Do not try to apply power to the system if any damaged components.

Dimensions

©Copyright 2017 Axiomtek Co., Ltd.

Version A1 Jan 2017

Printed in Taiwan

9416K640000E

1

I/O Outlets

The following figures show I/O outlets on the eBOX640-500-FL.

Front View

2 ©Copyright 2017 Axiomtek Co., Ltd.

Version A1 Jan 2017

Printed in Taiwan

9416K640000E

Installation of Hard Disk Drive

Step 1 Turn off the system, and unplug the power adaptor.

Step 2 Turn the system upside down to locate screws at the rear side, and then loosen two screws.

Step 3 Remove the bottom cover and locate SSD/HDD within the red line marked.

Step 4 Please prepare the following items to assemble SSD/HDD.

Step 5 Fasten two screws to fix SSD/HDD and connected the

SSD/HDD directly and make sure the insertion is complete.

© Copyright 2017 Axiomtek Co., Ltd.

Version A1 Jan 2017

Printed in Taiwan

9416K640000E

3