Sophos Sophos for Virtual Environments Startup Guide
Publicité
Publicité
Sophos for Virtual
Environments
Startup guide -- Enterprise
Console edition
Product version: 1.1
2
Contents
3
4
Sophos for Virtual Environments
1 About this guide
This guide tells you how to:
■
■
Use Sophos for Virtual Environments to provide central threat protection for virtual machines
(VMs) in a VMware ESXi or Microsoft Hyper-V environment.
Use Sophos Enterprise Console to manage Sophos for Virtual Environments.
If you are migrating to Sophos for Virtual Environments, see
(page 29).
If you want to use Sophos Central instead of Enterprise Console, see Sophos for Virtual
Environments Startup guide -- Sophos Central edition.
Startup guide -- Enterprise Console edition
2 About Sophos for Virtual Environments
Sophos for Virtual Environments is a security system that protects VMs. It works like this:
■
■
You put one or more installations of Sophos Security VM on each hypervisor host. The
Security VM can then detect and block threats on guest VMs connected to it.
You must put a Sophos Guest VM Agent on each guest VM.
■ You use Sophos Enterprise Console on another computer to manage the Security VMs and keep them up to date.
5
Sophos for Virtual Environments
Which environments can Sophos be used in?
Sophos for Virtual Environments can protect VMs in a VMware ESXi environment or a Microsoft
Hyper-V environment.
Which guest VMs can be protected?
The Sophos Security VM can protect guest VMs that run Windows operating systems. For supported versions, see
Guest VM requirements (page 10).
The Security VM can protect guest VMs that are on a different host.
How does scanning work?
When a guest VM tries to access a file:
■ The Sophos Guest VM Agent running on the VM notifies the Sophos Security VM.
■
■
The Security VM scans the file.
If the Security VM detects a threat, access to the file is blocked, and the Security VM sends an alert to Enterprise Console.
The Security VM can also perform a full scan of all the guest VMs. You can run this scan immediately or schedule it.
The file scanner uses intelligent caching to retain the results of previous scans. This helps improve overall performance when there are many connected guest VMs or when the same file is accessed repeatedly.
How is the Security VM managed?
Enterprise Console displays the status of the Security VM, including how up to date it is and whether it has detected any threats.
Enterprise Console also enables you to configure scanning by means of a policy.
How do you deal with threats?
The Security VM provides the ability to clean up threats automatically, see Sophos for Virtual
Environments Configuration guide--Enterprise Console edition.
How is the Security VM updated?
Enterprise Console keeps the Security VM updated.
Enterprise Console downloads the latest threat data, maintenance updates and new versions of the product from Sophos and puts them in a network share. The Security VM fetches and installs updates automatically.
6
Startup guide -- Enterprise Console edition
The date on which you get a maintenance update can depend on whether you subscribe to
Recommended or Preview releases.
How is the Guest VM Agent updated?
The Guest VM Agent is updated automatically.
The agent doesn't scan files, so it doesn't need updated threat identities. However, it does get updates when we improve the product.
The Security VM fetches these product updates and applies them to the guest VMs.
Updates are staggered to minimize the load on the Security VM and the underlying hypervisor host.
7
8
Sophos for Virtual Environments
3 Key steps in installation
Installation involves these key steps, which are described in the sections that follow:
■ Check the system requirements.
■
■
Uninstall other anti-virus products.
Set up the Sophos management software (Enterprise Console).
■
■
■
Install the Sophos Security VM and apply policies.
Install the Sophos Guest VM Agent on guest VMs.
Check that guest VMs are protected.
Startup guide -- Enterprise Console edition
4 Check the system requirements
This section tells you the system requirements and how to check that you comply with them.
It also tells you about any information (such as computer details) that you should gather now so that you will have it available when you install a Security VM.
It covers requirements for both VMware EXSi or Microsoft Hyper-V environments.
4.1 VMware requirements
This section shows you the software you need in a VMware environment.
4.1.1 VMware ESXi host
You should install the following on each host that will run a Sophos Security VM:
■ VMware ESXi host 5.5, 6.0, or 6.5.
Note: We recommend that you configure the host to get updates from VMware .
Hardware requirements
The VMware ESXi host must be able to allocate the following resources for each Sophos Security
VM:
■
■
2 CPUs.
20 Gb disk space.
■ 4 Gb RAM.
Notes
You should not place a CPU resource limit on the Sophos Security VM.
By default, 2 CPUs are allocated. If you have many guest VMs to protect, you can configure more
CPUs after you install the security VM. This guide tells you how.
The Security VM reserves memory. High-availability and load-balancing systems make automatic choices based on resource reservations for the VMs in your VMware environment. You should not remove the Security VM memory reservation.
4.1.2 VMware vCenter and vSphere
You require the following vCenter and vSphere software.
9
Sophos for Virtual Environments
Software vCenter
Version
Version 5.5, 6.0, 6.5
Notes
You will also need:
The network address.
An administrator account.
vSphere Client Version 5.5, 6.0, 6.5
4.1.3 VMware Tools
We recommend that you use VMware tools on Guest Virtual Machines because they can improve performance.
4.2 Microsoft Hyper-V requirements
This section shows you the software you need in a Microsoft Hyper-V environment.
The Microsoft Hyper-V system should be one of the following:
■
■
■
Hyper-V in Windows Server 2012 (Core, full)
Hyper-V in Windows Server 2012 R2 (Core, full)
Hyper-V in Windows Server 2016 (Core, Server with Desktop Experience)
Microsoft Hyper-V integration components
The Microsoft Hyper-V integration components will install automatically if Windows updating is enabled and works successfully. Without these tools your VM performance maybe degraded.
Guidelines for anti-virus for Microsoft Hyper-V
Microsoft publish guidelines for how to secure your Hyper-V server most effectively. See Microsoft
KBA 3105657 .
4.3 Guest VM requirements
Guest VMs should run one of the operating systems listed here.
10
Startup guide -- Enterprise Console edition
Operating system Service packs
Comments
Windows and Hyper-V containers not supported.
Windows 10 (32 and 64-bit).
Knowledge base article 125679 lists all supported versions.
Windows 8.1 (32 and 64-bit)
Windows 7 (32 and 64-bit)
Windows Server 2016 (64-bit)
---
SP1+
Windows Server 2012 R2 (64-bit)
Windows Server 2012 (64-bit)
Windows Server 2008 R2 (64-bit)
---
---
---
Windows and Hyper-V containers not supported.
4.4 Network requirements
The infrastructure requirements are:
■ The Security VM and guest VMs need to share a network connection. Ideally this should be a high-speed LAN with no network traffic throttling.
■ The network traffic between Security VM and guest VMs should not be blocked by firewalls or network access controllers.
4.4.1 NAT networks requirements
If you have guest VMs inside a NAT (Network Address Translation) network, you can protect them with a Security VM inside or outside of that network.
During installation you must configure the Security VM with the following:
■
■ a primary IP address outside of the NAT (this address must be able to communicate with the management console) and a secondary IP address that is within the NAT.
4.4.2 Subnets
You can configure the Security VM with up to five IP addresses. Each IP address must be on a different subnet.
11
Sophos for Virtual Environments
4.5 Sophos management requirements
You need the following Sophos software before you can install and use the Sophos Security VM.
If you don’t have this software, follow the instructions in
Set up Sophos management software
(page 14).
Software Version
Sophos Enterprise
Console
Version 5.4 or later.
Sophos for Virtual
Environments network share
No minimum version.
Notes
We recommend version 5.5.
You must set up a network share where Enterprise Console makes the latest updates available for your Security VM. This guide tells you how.
12
Startup guide -- Enterprise Console edition
5 Uninstall other anti-virus products
You should uninstall any anti-virus products, including Sophos products, that are already installed on your guest VMs.
You need to disable Windows Defender on server platforms where the security center is not present. We recommend that you do this using a group policy.
You cannot use Sophos for Virtual Environments to protect guest VMs that run other anti-virus products. If you try to do this, there may be reduced performance or a system deadlock in which the guest VM stops responding.
This limitation also applies to VMs with Sophos gateway or server products that include or require anti-virus components.
For more information, see knowledgebase article 125679 .
13
Sophos for Virtual Environments
6 Set up Sophos management software
Before you install Security VMs, you should:
■ Install Sophos Enterprise Console (if you do not already have it). You use this to download protection software updates and to manage the VMs you protect.
■ Create a Sophos for Virtual Environments network share. The share is used to keep Security
VMs up to date.
The following sections describe how to do this.
Already using Enterprise Console?
Warning: If you already use Enterprise Console to manage other Sophos products and now want to add Sophos for Virtual Environments, your customer credentials might not let you set up the Sophos network share. If this happens, check that your license includes this product. You can send license queries to [email protected]
6.1 Install Enterprise Console
If you already have Enterprise Console installed, go to
(page 14).
You should install Enterprise Console on a Windows computer that will be on the same network as the Security VMs.
Follow the instructions in the Enterprise Console quick startup guide . When you are prompted to select the platforms you want to protect, include Sophos for Virtual Environments. This creates the Sophos for Virtual Environments network share.
Caution: This gives you the Recommended version. If you want the Preview version, which
gives you early access to new features, create or edit the network share manually
(page 14).
Note: Whether you have Recommended or Preview, you must use the same version when you install the Security VMs later.
After installation, see
Check access to the Sophos update share (page 15).
6.2 Create a Sophos update share
If you have just made a new installation of Enterprise Console and subscribed to Sophos for
Virtual Environments, you can skip this section.
1. In Enterprise Console, on the View menu, click Update Managers.
14
Startup guide -- Enterprise Console edition
2. Set up a "subscription" to Sophos for Virtual Environments: a) In the Software Subscriptions pane, click Add at the top of the pane.
b) In the Software Subscription dialog box, type a name in the Subscription name text box.
c) In the platform list, select Sophos for Virtual Environments.
Note: If you cannot see this in the list, your customer credentials need updating. Contact
Sophos Technical Support.
d) In the version box, select Recommended or Preview.
Note: Preview gives you early access to new features. Read more about Recommended and Preview .
Note: You must use the same version when you install the Security VMs later.
3. Configure the update manager to use this subscription: a) In the Update Managers pane, select the update manager that is installed on this server.
Right-click it and click View/Edit configuration.
b) In the Configure update manager dialog box, on the Subscriptions tab, ensure that the new subscription is in the Subscribed to list.
c) Click OK.
Now continue to the next section.
6.3 Check access to the Sophos update share
You need to locate the Sophos update share and ensure that it can be accessed using either valid credentials or a guest account.
Note: Unless you specified otherwise, the Sophos update share is accessed by the user account set up during installation of Enterprise Console. It is described there as the "Update Manager" account and most customers give it the username SophosUpdateMgr.
1. In Enterprise Console, on the View menu, click Bootstrap Locations.
A list of locations is displayed.
2. Find the location for Sophos for Virtual Environments and make a note of it. You will need this when you install the Security VMs.
You will need the Fully Qualified Domain Name for this location.
3. If the share is on Windows Server 2008 or 2012, you might need to change Windows Firewall settings on the server temporarily to enable the Sophos security VM installer to access it.
The following Inbound rules must be set to On (which is the default):
■
■
■
File and Printer Sharing (NB-Datagram-In)
File and Printer Sharing (NB-Name-In)
File and Printer Sharing (NB-Session-In)
You can set these rules to Off again after you have installed your security VMs.
15
Sophos for Virtual Environments
Notes:
If you have a customised installation of Enterprise Console or you created an additional network share for updating Security VMs, note that:
■
■
If credentials are required, they will need to be stored on Security VMs after they are installed, so we recommend that you use read-only credentials.
If the network share is on a different computer to Enterprise Console (or the Update Manager component of Enterprise Console), ensure that it can also be accessed using an account that has write access.
16
Startup guide -- Enterprise Console edition
7 Install the Sophos Security VM
You can install one or more Security VMs on each host where you want to protect guest VMs.
Installation involves these steps, which are described in the sections that follow:
■
■
Check that you have the passwords you need.
Check that systems are synchronized.
■
■
■
■
■
Check the installer requirements.
Download the Sophos Security VM installer.
Install the Security VM.
Check the Security VM is installed.
Use Enterprise Console to apply policies to the Security VM.
7.1 Check that you have the passwords you need
When you run the Security VM installer, you need to enter certain passwords. You should make sure that you have the passwords for the following accounts:
■
■
The account used to access the Sophos for Virtual Environments network share (or "Sophos
Update folder").
If you're in a VMware environment, the vCenter Administrator account.
7.2 Check that systems are synchronized
You must ensure that the time is synchronized on the Enterprise Console server, on the host where you install the Security VM, and on the guest VMs.
You can use NTP (Network Time Protocol) synchronization for each host.
Warning: If the time is not synchronized, you can install a Security VM but you cannot manage it from Enterprise Console.
7.3 Check the installer requirements
Check that the computer and user account you're going to use meet the requirements.
■ The installer must be on a Windows computer that has access to your VMware vCenter or
Microsoft Hyper-V server over the network.
■
■
Installation of the Security VM must be done on the local network. The installer does not currently support the use of a proxy.
The installer cannot be used on a Windows XP or Windows Server 2003 computer.
17
Sophos for Virtual Environments
18
■ If you use Microsoft Hyper-V, you must run the installer as a user with rights to create and control VMs on the Hyper-V server. This can be a local user account on the Hyper-V server or a domain user.
The computer where you put the installer is used only for installation. It is not used for management or protection of your Security VM or guest VMs after installation.
7.4 Download the Sophos Security VM installer
You download the Security VM installer from the Sophos website (if you have not already done this).
The following steps assume that you have a MySophos account and that you have associated your license credentials with it. If you need help, go to www.sophos.com/en-us/support/knowledgebase/111195.aspx
.
Notes:
■ You can download the Security VM installer at any computer and then copy it to the computers where you will use it.
■ The installation instructions in later sections tell you which computer or computers you should use the installer on.
To download the installer:
1. Go to www.sophos.com/en-us/support/downloads/ .
2. Type your MySophos username and password.
3. If you see a web page that shows your licenses, select a license.
4. Under Standalone installers, click Sophos for Virtual Environments.
5. On the Sophos for Virtual Environments web page, find the installer for the hypervisor you are using (Hyper-V or ESXi).
6. Decide whether you want the Recommended or Preview version.
7. Download the installer.
After you install the Security VM, you will be able to get the Guest VM Agent from a public share on the Security VM.
7.5 Install the Security VM
To install a Security VM, you need the Sophos Security VM installer. If you haven't downloaded it yet, see
Download the Sophos Security VM installer (page 18).
Make sure the computer and account you use meet
Some installation steps apply only to VMware ESXi or only to Microsoft Hyper-V. These are indicated at the start of the step.
1. Double-click the installer.
A wizard runs to guide you through the installation.
2. Accept the license agreement.
3. At the welcome page, click Install to extract the installation files to a folder on your computer.
Startup guide -- Enterprise Console edition
4. Check that you have installed all the Prerequisites for installation.
5. Only if you're in a VMware ESXi environment:
In VMware vCenter credentials, enter your details and a name for the Security VM.
Note: Enter the administrator username in the form you use to log in to vCenter using vSphere
Client. In other words, with or without the domain prefix, as required, and with the same capitalization.
6. In ESXi host or Hyper-V host name, specify the host on which you want to install the Security
VM.
7. In Management console, select Use Sophos Enterprise Console.
8. In Sophos Update folder details, enter details of the Sophos for Virtual Environments network share you created earlier.
a) Enter the location. Use a UNC path including the fully qualified domain name, or a web address (if the share is on a web server).
For example:
\\<Your server name.domain name>\sophosupdate\CIDs\Sxxx\SVE
Tip: To check the location, go to Enterprise Console. On the View menu, click Bootstrap
Locations and look for the Sophos for Virtual Environments share.
b) Enter the username and password. You (or another administrator) set up this user account during Enterprise Console installation. It is described there as the "Update Manager" account and most customers give it the username SophosUpdateMgr.
Note that:
■ If you specify a domain user, you must include the domain name.
■ The credentials are securely stored on the Security VM.
9. Create a Password for access to your Security VM.
You need this password in order to view your protected guest VMs. You also need it if you want Sophos Technical Support to troubleshoot your installation remotely. They will use it to collect logs, which you can review and send to Sophos if required.
10. Select the Timezone that the Security VM will use to schedule scans.
11. Only if you're in a VMware ESXi environment:
In Datastore for the Security VM, select the type of datastore on which you want to install the Security VM.
Note: The Security VM protects guest VMs even if their templates are stored in different datastores.
19
Sophos for Virtual Environments
12. In IP settings for the Security VM, enter the IP settings for all the networks where you want to protect guest VMs. One Security VM can protect VMs on multiple networks.
a) In Select virtual LAN (ESXi) or Select vSwitch (Hyper-V), select from those available.
b) Enter the Static IPv4 address. You can only use static addresses.
c) Enter the Subnet mask.
d) Enter the Domain suffix.
e) Select Make Primary if this is the network that should have access to the Sophos management console. You can only have one primary network.
You can use the "+" button above the fields to add another network. The "-" button removes a network. The "<" and ">" buttons let you move between your settings for different networks.
13. In Gateway and DNS server details for the primary network card, enter details that will enable the Security VM to communicate with the management console and download updates.
Note: You can enter one DNS Server or, optionally, two.
14. Only if you're in a Hyper-V environment:
In Disk image location, specify a location for the Security VM disk image. This can be a network share or a local folder on the host.
15. At the Summary of installation page, you can see a summary of what will be installed. Click
Install.
16. At the Finished page, you can see whether installation of the Security VMs was successful.
If there was a failure, check the log for details.
Tip: You can click Start Over to run another installation or try again if an installation failed.
17. The What to do next page tells you how to configure the Security VM and protect guest VMs.
Follow the instructions in the next two sections to:
■
■
Check that you can see the Security VM in Enterprise Console.
Use Enterprise Console to apply policies to the Security VM.
Warning: Don't "suspend" the Security VM. If you do, communications with the management software will not be able to resume later.
7.6 Check that the Security VM is installed
This section tells you how to check that Security VM is installed and has the resources it needs.
Check that you can see the Security VM
When the Security VM has been installed, go to Enterprise Console.
You should see that the Security VM is registered and placed in the Unassigned group of computers.
If you change the name of a Security VM after installation, it is still shown in Enterprise Console with the name assigned during installation.
20
Startup guide -- Enterprise Console edition
Check whether you need to configure resources
Usually you do not need to configure resources for the Security VM. Note that:
■ If the Security VM protects a large number of guest VMs, you should ensure that it has enough processing power for scanning. See
Appendix: Add CPUs to the Security VM
(page
30).
■ The installer reserves memory for the Sophos Security VM. In a VMware environment, high-availability and load-balancing systems make automatic choices based on resource reservations for the VMs, so these choices could be different after you install the Security VM.
You should not remove the Security VM memory reservation.
You are ready to use Enterprise Console to apply policies to the Security VM.
7.7 Use Enterprise Console to apply policies
1. In Sophos Enterprise Console, create an updating policy and an anti-virus and HIPS policy.
Right-click each policy and select Reset Policy to Factory Defaults.
2. Double-click the new updating policy to open it.
3. In the Updating policy dialog box: a) Click the Subscription tab and select the subscription for Sophos for Virtual Environments.
b) Click the Primary Server tab and ensure that the location of the update folder includes the
fully qualified domain name. Save the policy.
4. Create a new computer group to contain the Security VM.
5. Apply the new policies to the new group.
6. Drag the Security VM from the Unassigned group to the new group.
Now you are ready to
install the Sophos Guest VM Agent (page 22) on guest VMs.
For general advice on post-installation and maintenance tasks, see Maintain the Security VM
(page 26).
21
Sophos for Virtual Environments
8 Install the Sophos Guest VM Agent
The Sophos Guest VM Agent must be run on each guest VM that you want to protect.
Check which operating systems you can install the Guest VM Agent on. See
(page 10).
1. On the guest VM, browse to the host where the Security VM is installed. You must use the IP address.
2. In the Public share, find the installer SVE-Guest-Installer.exe
3. Double-click the installer to run it, or transfer the installer to the guest VM and run it. Follow the on-screen instructions. Alternatively you can:
■ Use the command line. You can choose to install with (limited UI) or without (no UI) a progress bar being displayed to indicate the progression of the installation. The commands are case sensitive. Enter either:
Limited UI: SVE-Guest-Installer.exe SVMIPAddress=<IP Address of SVM>
/install /passive
No UI: SVE-Guest-Installer.exe SVMIPAddress=<IP Address of SVM>
/install /quiet
■ Use Group Policy deployment. For details, see this Microsoft article: http://support.microsoft.com/kb/816102
We recommend that you snapshot the guest VM after installing the agent. This will allow you to revert the guest VM safely later if you need to.
22
Startup guide -- Enterprise Console edition
9 Check that guest VMs are protected
This section tells you how to check that your guest VMs are protected. You can:
■ Check the protection settings on a guest VM.
■
■
Test on-access scanning on a guest VM.
Troubleshoot on-access scanning.
9.1 Check the protection settings
To check that a guest VM is protected:
1. Go to the guest VM and search for Security and Maintenance from the Start menu. If this option is not found search for Action Center.
Attention: If neither of these options are found then the guest VM does not provide Windows
Security Center. You must check whether the guest VM is protected using the steps described in
Test on-access scanning (page 23).
2. Click the drop-down arrow beside Security. You should see that Sophos for Virtual
Environments is enabled.
Note: If it is not enabled, see
Troubleshoot on-access scanning
(page 24)
9.2 Test on-access scanning
On-access scanning is your main method of protection against threats.
When you open, write, move or rename a file, the Security VM scans the file and grants access to it only if it does not pose a threat. When you run a program, the Security VM scans the executable file and any other files it loads.
Important: Ensure that Sophos Endpoint for Windows is not installed on any guest VMs that are protected with a Security VM.
To check that a Security VM is scanning files on access:
1. Go to eicar.org/86-0-Intended-use.html
. Copy the EICAR test string to a new file. Give the file a name with a .com extension and save it to one of the guest VMs.
2. Try to access the file from the guest VM.
3. In Sophos Enterprise Console, in the computer list in the lower right part of the window, click the Status tab.
4. In the list of computers, look for the Security VM.
■ If you have automatic cleanup on, double-click the Security VM to open the Computer
Details dialog box. In the "History" section, you should see that EICAR has been detected and cleaned up.
23
Sophos for Virtual Environments
■ If you don't have automatic cleanup on, you should see an alert in the Alerts and errors column. Right-click the security VM. In the Resolve alerts and errors dialog, you should see that EICAR has been detected but not cleaned up.
9.3 Troubleshoot on-access scanning
If on-access scanning is not working:
1. Ensure that the Security VM is in a group whose anti-virus policy specifies that on-access scanning should be turned on: a) In Enterprise Console, in the Groups pane, right-click the group that contains the Security
VM and select View/Edit Group Policy Details. Check which anti-virus and HIPS policy is used.
b) In the Policies pane, double-click Anti-virus and HIPS.
c) Double-click the policy that is used by the group that contains the Security VM.
d) In the On-access scanning panel, ensure that the Enable on-access scanning check box is selected. Click OK.
e) In the computer list, right-click the security VM and select Comply with. Then select Group
anti-virus and HIPS policy.
f) Check that the Security VM is shown as compliant with the policy.
2. Ensure that the guest VM is protected. Go to the Security VM host and look in the log file, see
(page 25).
3. Ensure that Windows Security Center shows the guest VM as protected by Sophos for Virtual
Environments.
4. Check that there are no pending restarts requested by Microsoft updates. These can prevent installation of the Sophos Guest VM Agent from being completed.
5. Check that there are no other anti-virus products installed. On server platforms where the security center is not present check that Windows Defender isn't active. Remember that you cannot use Sophos for Virtual Environments to protect guest VMs that run other anti-virus products.
6. If on-access scanning is still not working, contact Sophos Technical Support.
24
Startup guide -- Enterprise Console edition
10 View protected guest VMs
You can view all guest VMs that are protected by a Security VM.
1. Browse to the Security VM.You must use Windows Explorer and you must use the IP address.
2. Double-click the Logs share.
3. When prompted, enter your credentials:
■
■
Username is "Sophos".
Password is the access password you set when you installed the Security VM.
4. Open ProtectedGVMs.log to view the protected guest VMs.
Note: The ProtectedGVMs.log file only appears when the Security VM starts protecting guest
VMs.
25
Sophos for Virtual Environments
11 Maintain the Security VM
This section gives advice on post-installation and maintenance tasks.
■ You must power on the Security VM manually whenever the host is taken out of
maintenance or standby mode. Do this before you power on the guest VMs, so that the guest VMs are protected immediately.
■
■
■
Don't "suspend" the Security VM. If you do, communications with the management software will not be able to resume later.
Verify that the Security VM is receiving security updates from Sophos. You can do this by checking its update status in Enterprise Console.
Backups. We recommend that the Security VM is excluded from regular backup tasks, as this can degrade its performance. If the Security VM needs to be recovered due to infrastructure failures, we recommend you redeploy the Security VM.
26
Startup guide -- Enterprise Console edition
12 Uninstall the Security VM
To uninstall a Security VM, you delete it.
Before you start, ensure that guest VMs will continue to be protected. Go to the Security VM and
View protected guest VMs (page 25). Then move guest VMs to another Security VM with similar
policy settings.
To move your guest VMs:
1. Uninstall the Guest VM Agent, see
Uninstall the Guest VM Agent (page 28).
2. Reinstall the Guest VM Agent with the new Security VM IP address, see
(page 22).
Once you have moved your guest VMs you can delete the Security VM. To do this:
1. Go to your hypervisor.
2. Power down the Security VM.
3. Delete the VM.
27
Sophos for Virtual Environments
13 Uninstall the Guest VM Agent
You can uninstall the Guest VM Agent from Control Panel.
1. On the guest VM, open Control Panel.
2. Click Programs and Features.
3. Select these features and click Uninstall:
■
Sophos for Virtual Environments
■
Sophos Guest VM Scanning Service
■
Sophos Virus Removal Tool.
28
Startup guide -- Enterprise Console edition
14 Migrate to Sophos for Virtual
Environments
Which products can I migrate from?
You can migrate to Sophos for Virtual Environments from these products.
■ Sophos Anti-Virus for vShield in a VMWare ESXi environment
■
■
Sophos Anti-Virus running locally on each guest VM in either a VMware ESXi environment or a Microsoft Hyper-V environment
Other vendors' anti-virus products in either a VMware ESXi environment or a Microsoft Hyper-V environment
Note: Sophos for Virtual Environments protects guest VMs on a VMware ESXi host including when running in a NSX environment. However, Sophos for Virtual Environments does not integrate with the NSX manager. You should not install any anti-virus software to run on NSX as this will impact performance and could cause deadlocks.
Note: Sophos for Virtual Environments uses a Security VM to provide central threat scanning.
Once you install this, guest VMs no longer need threat data updates.
How do I migrate?
Follow the steps below. You can find more details on each step in this guide.
Note: If you’re migrating from third-party anti-virus software, be aware that:
■
■
Sophos for Virtual Environments requires network connectivity between the Security VM and guest VMs.
Sophos for Virtual Environments supports dynamic VM load balancing technologies like vMotion and Live migration, but performance is best if high speed network connectivity between the
Security VM and guest VMs is maintained.
To migrate:
1. Install a Security VM.
Note: This new Security VM can be on the same host as an existing SAV vShield Security
VM.
2. Go to your management console and verify that the Security VM is successfully updating.
3. Shut down the old Security VM or uninstall your old anti-virus software.
Caution: Your guest VMs will become unprotected so please ensure their security.
4. Install the new lightweight Sophos Guest VM Agent.
5. Verify, as described in this guide, that all guest VMs are now protected.
29
Sophos for Virtual Environments
15 Appendix: Add CPUs to the Security VM
If you have many guest VMs on a host, you should ensure that the Security VM has enough processing power to scan the files they use when they all start up.
To do this, add more CPUs for the Security VM. You can do this any time.
Note: If you add CPUs after you put the Security VM in a computer group in Enterprise Console, you should wait until the Security VM complies with group policy.
Depending on the type of load, adding CPUs can also improve overall system performance.
Add CPUs in VMware ESXi
Add CPUs as follows:
1. Power off the Security VM.
2. In vSphere Client, select the Security VM.
3. Select Edit Settings > Hardware > CPUs. Then specify the number of CPUs.
Add CPUs in Microsoft Hyper-V
Add CPUs as follows:
1. Click Start, select Administrative Tools, and then click Hyper-V Manager.
2. In the results pane, under Virtual Machines, select the Security VM.
3. In the Action pane, under the VM name, click Settings.
4. Click Processor and specify the number of processors.
30
Startup guide -- Enterprise Console edition
16 Technical support
You can find technical support for Sophos products in any of these ways:
■ Visit the Sophos Community at community.sophos.com/ and search for other users who are experiencing the same problem.
■
■
■
Visit the Sophos support knowledgebase at www.sophos.com/en-us/support.aspx
.
Download the product documentation at www.sophos.com/en-us/support/documentation.aspx
.
Open a ticket with our support team at https://secure2.sophos.com/support/contact-support/support-query.aspx
.
31
Sophos for Virtual Environments
17 Legal notices
Copyright © 2017 Sophos Limited. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording or otherwise unless you are either a valid licensee where the documentation can be reproduced in accordance with the license terms or you otherwise have the prior permission in writing of the copyright owner.
Sophos, Sophos Anti-Virus and SafeGuard are registered trademarks of Sophos Limited, Sophos
Group and Utimaco Safeware AG, as applicable. All other product and company names mentioned are trademarks or registered trademarks of their respective owners.
Third-party licenses
For third-party licenses that apply to your use of this product, please refer to the following folder on the Sophos Security VM: /usr/share/doc .
Some software programs are licensed (or sublicensed) to the user under the GNU General Public
License (GPL) or similar Free Software licenses which, among other rights, permit the user to copy, modify, and redistribute certain programs, or portions thereof, and have access to the source code. The GPL requires for any software licensed under the GPL, which is distributed to a user in an executable binary format, that the source code also be made available to those users. For any such software which is distributed along with this Sophos product, the source code is available by following the instructions in knowledge base article 124427 .
20170803
32
Télécharger
Lien public mis à jour
Le lien public vers votre chat a été mis à jour. Vous pouvez afficher et gérer vos liens de chat après inscription ici.
Lien public du document
Publicité