- Computers & electronics
- Telecom & navigation
- Two-way radios
- Motorola Solutions
- AZ489FT7087
- User manual
advertisement
![Motorola Solutions AZ489FT7087 2-WayPortable Radio User Manual | Manualzz Motorola Solutions AZ489FT7087 2-WayPortable Radio User Manual | Manualzz](http://s2.manualzz.com/store/data/063045991_1-9108f0af1937030f5ba8de2b19213a1c-360x466.png)
APX6000_M3_FrontCover.fm Page 1 Wednesday, March 27, 2013 6:57 PM
APX™ TWO-WAY RADIOS
APX 6000 /
APX 6000Li
MODEL 3
USER GUIDE
Contents
Declaration of Conformity......................... 9
Important Safety Information........11
Software Version............................12
Notice to Users (FCC and Industry
Canada).................................................... 12
Consignes de sécurité importantes.................................13
Version logicielle........................... 14
Avis aux utilisateurs (FCC et Industrie
Canada).................................................... 14
Computer Software Copyrights....15
Documentation Copyrights...........16
Disclaimer.......................................17
Getting Started............................... 18
How to Use This Guide..................................18
Notations Used in This Manual......................18
Additional Performance Enhancement.......... 18
ASTRO 25 Enhanced Data.................19
Dynamic System Resilience (DSR).... 19
CrossTalk Prevention..........................19
Encrypted Integrated Data (EID).........19
SecureNet........................................... 19
Conventional Talkgroup and Radio
Scan Enhancements......................19
What Your Dealer/System Administrator
Can Tell You............................................. 20
Preparing Your Radio for Use.......21
Charging the Battery......................................21
Attaching the Battery..................................... 21
1
English
2
English
Attaching the Antenna................................... 22
Removing and Attaching the Accessory
Connector Cover...................................... 23
Using the Carry Holder.................................. 24
Turning On the Radio.................................... 26
Adjusting the Volume.....................................27
Identifying Radio Controls............ 28
Radio Parts and Controls.............................. 28
Programmable Features................................ 29
Assignable Radio Functions............... 30
Assignable Settings or Utility
Functions....................................... 33
Accessing the Preprogrammed Functions.....34
Menu Select Buttons...........................34
Home Button....................................... 35
4-Way Navigation Button.................... 35
Data Feature Button........................... 35
Keypad.......................................................... 35
Mode.............................................. 36
Mode.............................................. 37
Mode.............................................. 38
Keypad Characters – Hexadecimal
Mode.............................................. 39
Push-To-Talk (PTT) Button............................40
Identifying Status Indicators.........41
Status Icons................................................... 41
Text Messaging Service (TMS) Indicators.....45
TMS Status Icons................................46
TMS Menu Options............................. 47
Call Type Icons.............................................. 47
LED Indicator................................................. 48
Intelligent Lighting Indicators......................... 49
Alert Tones.................................................... 50
Phone Call Displays and Alerts..................... 54
General Radio Operation...............56
Selecting a Zone............................................56
Selecting a Radio Channel............................ 56
Selecting a Channel via Channel Search
Button....................................................... 57
Mode Select Feature..................................... 58
Saving a Zone and a Channel to a
Softkey........................................... 58
Saving a Zone and a Channel to a
Button............................................ 59
Receiving and Responding to a Radio Call... 59
Talkgroup Call................................59
Private Call (Trunking Only)...........60
Telephone Call (Trunking Only)..... 61
Methods to Make a Radio Call.......................61
Making a Talkgroup Call..................... 62
Making a Private Call (Trunking
Only).............................................. 62
Making an Enhanced Private Call
(Trunking Only).............................. 63
Making a Telephone Call (Trunking
Only).............................................. 64
Switching Between Repeater or Direct
Operation Button...................................... 65
Monitor Feature............................................. 65
Monitoring a Channel..........................65
Monitoring Conventional Mode........... 66
Advanced Features........................67
Advanced Call Features................................ 67
Conventional Only)........................ 67
(Conventional Operation Only)...... 68
Sending a Status Call......................... 69
Only).............................................. 69
Dynamic Zone Programming (DZP)....71
Contacts........................................................ 73
Making a Private Call from Contacts...74
Adding a New Contact Entry...............75
Deleting a Contact Entry..................... 76
Adding a Contact to a Call List............76
Removing a Contact from a Call
List................................................. 77
Methods of Contact Editing in a
Call List.......................................... 77
Viewing Details of a Contact............... 79
Scan Lists...................................................... 79
Viewing a Scan List.............................79
Editing the Scan List........................... 79
Changing the Scan List Status............80
Viewing and Changing the Priority
Status.............................................81
Scan.............................................................. 81
Turning Scan On or Off.......................82
3
English
4
English
Making a Dynamic Priority Change
(Conventional Scan Only).............. 82
Deleting a Nuisance Channel............. 82
Restoring a Nuisance Channel........... 83
Call Alert Paging............................................ 83
Receiving a Call Alert Page................ 83
Sending a Call Alert Page...................83
Quick Call II (ASTRO P25 Digital
Trunking and Conventional)..................... 85
Transmission................................. 86
Emergency Operation....................................86
Sending an Emergency Alarm............ 87
(Trunking Only).............................. 88
Sending an Emergency Alarm with
Emergency Call............................. 88
Sending a Silent Emergency Alarm.... 89
Emergency.....................................89
Emergency Keep-Alive Feature.......... 90
Emergency Find Me............................90
Fireground (Conventional Only).....................91
Entering Fireground Zone Channel.....91
Responding to Evacuation Indicator... 92
(Conventional Only).................................. 93
Using TPS Normal Transmission........93
Transmission................................. 93
Man Down..................................................... 94
Pre-Alert Timer....................................95
Post-Alert Timer.................................. 95
Feature is Triggered...................... 96
Triggering Emergency.........................96
Enhanced is Triggered...................96
Exiting Man Down Feature..................97
Re-Initiating Man Down.......................97
Testing the Man Down Feature...........98
Automatic Registration Service (ARS)...........98
Mode.............................................. 98
User Login Feature............................. 99
Text Messaging Service (TMS)................... 101
Accessing the Messaging Features.. 102
Text Message.............................. 102
Sending a Quick Text Message........ 103
Priority Status and Request Reply of a New Text Message............... 105
ASTRO 25 Advanced Messaging Solution.. 112
Advanced Messaging Solution.... 112
Two-Factor Authentication................ 113
Sending a Query............................... 115
Receiving a Query............................ 117
Secure Operations.......................................117
Selecting Secure Transmissions.......117
Selecting Clear Transmissions......... 118
Managing Encryption........................ 118
Security........................................................123
Radio Lock........................................ 123
Radio Stun and Kill...................................... 126
Radio Stun........................................ 126
Radio Kill...........................................127
Global Positioning System / Global
Navigation Satellite System.................... 128
GPS Operation................................. 128
GPS Performance Enhancement......129
(Using GPS).................................129
Military Grid Reference System
(MGRS) Coordinates................... 130
Accessing the Outdoor Location
Feature........................................ 131
Saving a Waypoint............................ 131
Viewing a Saved Waypoint............... 132
Editing the Alias of a Waypoint......... 133
Waypoint...................................... 133
Deleting a Single Saved Waypoint....134
Deleting All Saved Waypoints...........135
Bearing from a Saved Waypoint.. 136
Mode............................................ 136
(ASTRO Conventional only)........ 136
Geofence (ASTRO 25 Trunking System).... 137
Entering the Geofence Area............. 138
Trunking System Controls........................... 139
Operating in Failsoft System.............139
Out-of-Range Radio..........................140
Site Trunking Feature....................... 140
Locking and Unlocking a Site............140
Site Display and Search Button........ 140
Mission Critical Wireless - Bluetooth -........ 141
Turning On Bluetooth .......................142
Turning Off the Bluetooth..................142
Re-Pair Timer....................................143
Bluetooth Drop Timer........................144
Motorola Proximity Pairing (LF-
MPP) Feature.............................. 145
5
English
6
English
Radio Indications of Lost Bluetooth
Connection...................................146
Standard Pairing Feature..................147
PIN Authentication in Pairing............ 149
Turning On the Bluetooth Audio
Radio to the Headset).................. 152
Turning Off the Bluetooth Audio
Headset to the Radio).................. 153
Adjusting the Volume of the Radio from Bluetooth Audio Device....... 153
Viewing and Clearing the Bluetooth
Device Information....................... 154
Clearing All Bluetooth Devices
Information................................... 155
Editing the Bluetooth Friendly
Name........................................... 155
Over-the-Air Programming (POP 25,
ASTRO 25, ASTRO Conventional).........156
Responding to the Notification of
Upgrade....................................... 156
Voice Announcement.................................. 157
Site Selectable Alerts (ASTRO 25)..............158
Sending SSA Notification to Single
Site...............................................159
Sending SSA Notification to Single
Site Via Manual Entry.................. 159
Sending SSA Notification to All
Sites............................................. 160
Sending SSA Notification to All
Available Sites............................. 161
Stopping SSA Notification of a
Single Site....................................162
Stopping SSA Notification of a
Single Site Via Manual Entry....... 162
Stopping SSA Notification of All
Sites............................................. 163
Stopping SSA Notification of All
Available Sites............................. 163
Wi-Fi............................................................ 164
Turning Wi-Fi On or Off.....................164
Checking the Wi-Fi Configuration and Status of the Radio............... 165
Utilities......................................................... 165
Viewing Recent Calls........................ 165
Using the Flip Display....................... 166
Selecting a Basic Zone Bank............ 166
Selecting an Enhanced Zone Bank.. 167
Selecting the Power Level................ 167
Selecting a Radio Profile...................168
Enabling and Disabling the Radio
Alias............................................. 169
Controlling the Display Backlight...... 169
Locking and Unlocking the Keypad and Controls................................ 170
Turning the Controls and Keypad
Buttons Tones On or Off.............. 170
Turning Voice Mute On or Off........... 170
Using the Time-Out Timer.................171
Time and Date Setup........................ 171
Operation Features...................... 172
Using the PL Defeat Feature............ 173
Digital PTT ID Support...................... 173
Smart PTT Feature (Conventional
Only)............................................ 174
Transmit Inhibit................................. 175
IMPRES Battery Annunciator............176
General Radio Information................176
Helpful Tips.................................. 180
Radio Care.................................................. 180
Cleaning Your Radio.........................181
Proper Ways to Handle the Radio.... 181
Radio Service and Repair................. 182
Battery Care................................................ 182
Battery Charge Status.......................182
Battery Recycling and Disposal........ 183
Accessories..................................185
Maritime Radio Use in the VHF
Frequency Range..................... 186
Special Channel Assignments..................... 186
Emergency Channel......................... 186
Non-Commercial Call Channel......... 186
Operating Frequency Requirements............186
Declaration of Compliance for the Use of
Distress and Safety Frequencies............189
Technical Parameters for Interfacing
External Data Sources............................189
Glossary........................................190
Limited Warranty..........................196
PRODUCTS........................................... 196
AND FOR HOW LONG:......................... 196
7
English
8
English
II. GENERAL PROVISIONS:....................... 197
III. STATE LAW RIGHTS:............................198
IV. HOW TO GET WARRANTY SERVICE:.198
V. WHAT THIS WARRANTY DOES NOT
COVER:.................................................. 198
PROVISIONS:........................................ 199
VII. GOVERNING LAW:.............................. 200
VIII. For Australia Only................................ 200
Declaration of Conformity
This declaration is applicable to your radio only if your radio is labeled with the FCC logo shown below.
Declaration of Conformity
Per FCC CFR 47 Part 2 Section 2.1077(a)
Responsible Party
Name: Motorola Solutions, Inc.
Address: 1303 East Algonquin Road, Schaumburg, IL 60196-1078, U.S.A.
Phone Number: 1-800-927-2744
Hereby declares that the product:
Model Name: APX 6000/APX 6000Li conforms to the following regulations:
FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.109(a)
English
9
10
English
Class B Digital Device
As a personal computer peripheral, this device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1 This device may not cause harmful interference, and
2 This device must accept any interference received, including interference that may cause undesired operation.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio or TV technician for help.
Important Safety Information
RF Energy Exposure and Product Safety Guide for Portable Two-Way Radios
ATTENTION!
This radio is restricted to Occupational use only.
Before using the radio, read the RF Energy Exposure and Product Safety Guide for Portable Two-Way
Radios which contains important operating instructions for safe usage and RF energy awareness and control for Compliance with applicable standards and Regulations.
For a list of Motorola-approved antennas, batteries, and other accessories, visit the following website: http://www.motorolasolutions.com/APX
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
This radio transmitter has been approved by Industry
Canada to operate with Motorola-approved antenna with the maximum permissible gain and required antenna impedance for each antenna type indicated.
Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
English
11
Software Version
All the features described in the following sections are supported by the software version R14.00.00 or later.
See Accessing the Radio Information
on page 177 to determine the software version of your radio.
Check with your dealer or system administrator for more details of all the features supported.
Notice to Users (FCC and Industry Canada)
This device complies with Part 15 of the FCC rules and RSS 210 of the Industry Canada rules per the following conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired operation.
• Changes or modifications made to this device, not expressly approved by Motorola, could void the authority of the user to operate this equipment.
12
English
Consignes de sécurité importantes
Radios bidirectionnelles portatives : exposition aux radiofréquences et sécurité du produit
ATTENTION!
Cette radio ne doit être utilisée qu'à des fins
professionnelles. Avant d'utiliser la radio, lisez le guide Radios bidirectionnelles portatives : exposition aux radiofréquences et sécurité du produit, qui contient d'importantes instructions de fonctionnement pour une utilisation sécuritaire et des informations sur l'exposition aux fréquences radioélectriques, dans le but d’assurer votre conformité aux normes et règlements en vigueur.
Visitez le site Web suivant pour obtenir la liste des antennes, des batteries et des autres accessoires approuvés par Motorola : http://www.motorolasolutions.com/APX
Selon la réglementation d'Industrie Canada, cet
émetteur radio ne peut être utilisé qu'avec une antenne dont le type et le gain maximal (ou minimal) sont approuvés par Industrie Canada pour cet
émetteur. Afin de limiter les interférences radio pour les autres utilisateurs, le type et le gain de l'antenne doivent être choisis de façon à ce que la puissance isotrope rayonnée équivalente (P.I.R.E.) ne soit pas plus forte qu'il ne le faut pour établir la communication.
Cet émetteur radio a été approuvé par Industrie
Canada pour utilisation avec une antenne approuvée par Motorola offrant le gain maximal autorisé et l'impédance requise pour le type d'antenne indiqué. Il est strictement interdit d'utiliser avec cet appareil tout type d'antenne ne figurant pas dans cette liste et présentant un gain supérieur au maximum indiqué pour le type.
English
13
14
Version logicielle
Toutes les fonctions décrites dans les sections suivantes sont prises en charge par la version
R14.00.00 ou les versions ultérieures du logiciel de la radio.
Pour obtenir davantage de renseignements à propos des fonctions prises en charge, adressez-vous à votre détaillant ou à votre administrateur de système.
Avis aux utilisateurs (FCC et Industrie
Canada)
Cet appareil est conforme à la Partie 15 des règlements de la FCC et RSS 210 du règlement d'Industrie Canada selon les conditions énumérées ci-dessous:
• Ce dispositif ne doit pas causer d'interférences nuisibles.
• Cet appareil doit accepter toute interférence reçue, y compris les interférences qui peuvent perturber le fonctionnement.
• Les changements ou les modifications apportées
à ce dispositif, non expressément approuvées par
English
Motorola, peuvent annuler le droit de l'utilisateur à utiliser cet équipement.
Computer Software Copyrights
The Motorola products described in this manual may include copyrighted Motorola computer programs stored in semiconductor memories or other media.
Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs including, but not limited to, the exclusive right to copy or reproduce in any form the copyrighted computer program.
Accordingly, any copyrighted Motorola computer programs contained in the Motorola products described in this manual may not be copied, reproduced, modified, reverse-engineered, or distributed in any manner without the express written permission of Motorola. Furthermore, the purchase of
Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the normal nonexclusive license to use that arises by operation of law in the sale of a product.
English
15
Documentation Copyrights
No duplication or distribution of this document or any portion thereof shall take place without the express written permission of Motorola. No part of this manual may be reproduced, distributed, or transmitted in any form or by any means, electronic or mechanical, for any purpose without the express written permission of
Motorola.
16
English
Disclaimer
The information in this document is carefully examined, and is believed to be entirely reliable.
However, no responsibility is assumed for inaccuracies. Furthermore, Motorola reserves the right to make changes to any products herein to improve readability, function, or design. Motorola does not assume any liability arising out of the applications or use of any product or circuit described herein; nor does it cover any license under its patent rights, nor the rights of others.
English
17
Getting Started
How to Use This Guide
This User Guide covers the basic operation of the
APX Portables.
However, your dealer or system administrator may have customized your radio for your specific needs.
Check with your dealer or system administrator for more information.
18
Notations Used in This Manual
Throughout the text in this publication, you will notice the use of Warning, Caution, and Note. These notations are used to emphasize that safety hazards exist, and the care that must be taken or observed.
Warning:
An operational procedure, practice, or condition and so on, which may result in injury or death if not carefully observed.
Caution:
An operational procedure, practice, or condition and so on, which may result in damage to the equipment if not carefully observed.
Note:
An operational procedure, practice, or condition and so on, which is essential to emphasize.
The following special notations identify certain items.
Example
Home button or
Phon
Description
Buttons and keys are shown in bold print or as an icon.
Menu entries are shown similar to the way they appear on the display of the radio.
This means “Press the right side of the 4-Way Navigation Button”.
Additional Performance Enhancement
The following performance enhancements are some of the latest creations designed to enhance the security, quality and efficiency of the radios.
English
ASTRO 25 Enhanced Data
ASTRO 25 Enhanced Data is optimized to handle different message sizes and variable update rates from different applications of the radio. Add Enhanced
Data to the Integrated Data system with a software installation to improve data channel efficiency and enable denser network traffic.
Dynamic System Resilience (DSR)
DSR ensures the radio system is seamlessly switched to a backup master site dynamically in case of system failure. DSR also provides additional indication e.g. failure detection, fault recovery, and redundancy within the system to address to the user in need. Mechanisms related to the Integrated Voice and Data (IV&D) or data centric are all supported by
DSR.
CrossTalk Prevention
This feature prevents crosstalk scenarios from happening, especially when a wideband antenna is used. This feature allows the adjustment of the internal SSI clock rate of the radio. This subsequently reduces the possibility of radio frequency interfering spurs and prevents the issues of crosstalk.
Encrypted Integrated Data (EID)
EID provides security encryption and authentication of
IV&D data bearer service communication between the radio and the Customer Enterprise Network.
SecureNet
SecureNet allows user to perform secured communications on an Analog or Motorola Data
Communication (MDC) channel. The MDC Over-the-
Air Rekeying (OTAR) feature will allow users to perform OTAR activities on an MDC channel.
Conventional Talkgroup and Radio Scan
Enhancements
A few enhancements have been made to the
Conventional Talkgroup at the system. These enhancements improve the Scan feature operation significantly when multiple agencies are using a single conventional radio frequency channel. These enhancements allow users to use Selective Squelch to operate on only the subset of talkgroups that are relevant to the users rather than all talkgroups on the channel. These Scan improvements have been made to eliminate the audio holes that were present and to turn on the busy LED when activity is present on the channel. Mixed Vote Scan and Standard
19
English
Conventional Scan configurations are supported.
Priority Operation is also supported.
Up to 30 different talkgroups can be supported using conventional channels. A maximum of four talkgroups can be supported when Vote Scan channels are being used.
Smart PTT is supported with this enhancement as
Smart PTT prevents users from transmitting while other users are on the channel.
Note:
User Selectable Talkgroups are not compatible with this Conventional Talkgroup
Enhancement.
What Your Dealer/System Administrator Can
Tell You
Check with your dealer or system administrator for the correct radio settings, if the radio is to be operated in extreme temperatures (less than -30 °C or more than +60 °C).
You can consult your dealer or system administrator about the following:
20
English
• Is your radio programmed with any preset conventional channels?
• Which buttons have been programmed to access other features?
• What optional accessories may suit your needs?
Note:
Specifications may vary for different radio models. Check with your dealer or system administrator for more information.
Preparing Your Radio for Use
This section provides simple instructions to prepare your radio for use.
Charging the Battery
Warning:
To avoid a possible explosion:
• Do not replace the battery in any area labeled hazardous atmosphere.
• Do not discard batteries in a fire.
The Motorola-approved battery shipped with your radio is uncharged. Prior to using a new battery, charge it for a minimum of 16 hours to ensure optimum capacity and performance. For a list of
Motorola-authorized batteries and chargers available for use with your radio, see
185.
Note:
When charging a battery attached to a radio, turn the radio off to ensure a full charge.
To charge the battery, place the battery (with or without the radio) in a Motorola-approved charger.
The LED on the charger indicates the charging progress; see the charger user guide.
Attaching the Battery
If your radio is preprogrammed with volatile-key retention, the encryption keys are retained for approximately 30 seconds after battery removal.
Check with your dealer or system administrator for more information.
You can view the status of the IMPRES
™
battery if the radio is using an IMPRES battery. See
on page 176 for more information.
1 Slide the battery into the radio frame until the side latches click into place.
21
English
22
English
A
2 To remove the battery, squeeze the release latches at the bottom of the battery until the battery releases from the radio and remove the battery from the radio.
Note:
When removing the battery, ensure that the radio is turned off.
Attaching the Antenna
Ensure the radio is turned off before attaching the antenna.
1 Set the antenna in its receptacle.
2 Turn the antenna clockwise to attach to the radio.
3 To remove the antenna, turn the antenna counterclockwise.
Note:
When removing the antenna, ensure that the radio is turned off.
Removing and Attaching the Accessory
Connector Cover
The accessory connector is on the antenna side of the radio. It is used to connect accessories to the radio.
Note:
To prevent damage to the connector, shield it with the connector cover when not in use.
1 To remove the accessory connector cover, rotate the thumbscrew counterclockwise until it disengages from the radio.
Note:
If the thumbscrew is too tight, use an Allen wrench at to loosen it first.
English
23
A
Using the Carry Holder
1 Position the radio within the carry holder with the main speaker facing outward.
B
C
24
English
2 Rotate and lift the connector cover to disengage it from the radio.
3 To attach the accessory connector cover, insert the hooked end of the cover into the slot above the connector.
4 Press downward on the cover’s top to seat it in the slot.
5 Once in place, tighten by rotating the thumbscrew
clockwise by hand.
2 Slide the radio down into the carry holder until it clicks in place.
3 To remove the radio from the carry holder, place the tip of your fingers on the ledge of the carry holder.
4 Push at the bottom of the radio until the radio is released from it.
English
25
Turning On the Radio
1 Rotate the On/Off/Volume Control Knob clockwise until you hear a click.
• If the power-up test is successful, you see momentary SELFTEST on the radio display, followed by the Home screen.
• If the power-up test is unsuccessful, you see
Error XX/YY ( XX/YY is an alphanumeric code).
Note:
If the radio fails to power-up after repeating a few times, record the Error
XX/YY code and contact your dealer.
26
English
2 To turn off the radio, rotate the On/Off/Volume
Control Knob counterclockwise until you hear a click.
1 To increase the volume, rotate the On/Off/Volume
Control Knob clockwise.
A
Adjusting the Volume
Ensure the radio is power on and the main speaker is pointed towards you for increased loudness and intelligibility, especially in areas with loud background noises.
2 To decrease the volume, rotate this knob counterclockwise.
English
27
Identifying Radio Controls
Radio Parts and Controls
3
4
1
2
14
13
12
11
5
6
10
9
7
8
28
English
15
16
17
18
19
8
3
4
1
2
Antenna
LED
Top (Orange) Button [1]
Microphone
21
20
25
24
23
22
7
8
9
5
6
Accessory Connector
Home Button
4–Way Navigation Button
Battery Latch
Keypad
10 Data Feature Button
11 Menu Select Buttons
12 Main Display
13 2–Position Concentric Switch [1]
14 3–Position A/B/C Switch [1]
15 On/Off/Volume Control Knob
16 Top Side (Select) button
[1]
17 Push-to-Talk (PTT) Button
18 Side Button 1 [1]
19 Side button 2 [1]
20 Battery
1
These radio controls/buttons are programmable.
21 Bluetooth Pairing Location Indicator
22 Main Speaker
23 Microphone
24 Top Display
25 16–Position Select Knob [1]
Programmable Features
Any reference in this manual to controls that are preprogrammed means that a qualified radio technician must use the radio programming software to assign a feature to a control.
Your dealer can program the programmable buttons as shortcuts to radio functions or preset channels/ groups depending on the duration of a button press:
Press Pressing and releasing rapidly.
English
29
30
Long press Pressing and holding for the preprogrammed duration (between
0.25 seconds and 3.75 seconds).
Hold down Keeping the button pressed.
Assignable Radio Functions
Bluetooth On/Off Allows you to turn on/off the
Bluetooth.
Bluetooth
Configuration
Allows you to access to the
Bluetooth menu.
Bluetooth Audio
Reroute
Allows you to toggle the audio route between radio speaker or
Remote Speaker Microphone and Bluetooth headset.
Bluetooth
Headset PTT
Bluetooth Data
Devices
Bluetooth Clear
All Pairing
Keys up the Bluetooth Headset microphone.
Pairs with the data devices for data transfer.
Allows you to clear all pairing information for Bluetooth. This is accessed by a long press of the Bluetooth On/Off Button.
English
Bluetooth Inquiry
On/Off
Enables Bluetooth Search feature.
Bluetooth
Discoverable
On/Off
Call Alert
Call Response
Enables Bluetooth visibility.
This is accessed by a long press of the Bluetooth Inquiry
On/Off Button.
Allows the radio to function like a pager, or to verify if a radio is active on the system.
Allows you to answer a private call.
Channel
Contacts
Dynamic ID
(Conventional
Only)
Dynamic Priority
(Conventional
Only)
Selects a channel.
Selects the Contacts menu.
Allows you to edit the ASTRO
Individual ID and/or MDC
Primary ID of the radio.
Allows any channel in a Scan
List (except for the Priority-One channel) to temporarily replace the Priority-Two channel.
Emergency
Information
Internet Protocol
Address
Location
Depending on the programming, initiates or cancels an emergency alarm or call.
Displays the information of the radio.
Display the Internet Protocol
(IP) address, device name and status of the radio.
Determines the current location
(latitude, longitude, time and date), and also the distance and bearing to another location.
Or, turns the GPS functionality on or off for all locations.
Man Down Clear Clears the alarm of Man Down mode which was triggered when your radio achieves or passes a tilt angle threshold or a combination of the angle threshold and a motion sensitivity level.
Message Enters the current message list.
Mode Select
Monitor
(Conventional
Only)
Multiple Private
Line
(Conventional
Only)
Long-press programs a button with the current zone and channel of the radio; once programmed, the short-press of that button changes the radio zone channel to the programmed zone and channel.
Monitors a selected channel for all radio traffic until function is disabled.
Selects the Multiple Private
Line lists.
Nuisance Delete Temporarily removes an unwanted channel, except for priority channels or the designated transmit channel from the scan list.
One Touch 1– 4 Launches a specific feature with one single button-press.
You can setup as many as four separately programmed buttons for four different features.
31
English
32
English
Phone
Private Call
(Trunking Only)
Allows you to make and receive calls similar to standard phone calls.
Allows a call from an individual radio to another individual radio.
Overrides any coded squelch
(DPL or PL) that is preprogrammed to a channel.
Private Line
Defeat
(Conventional
Only)
Query
Radio Profiles
Launches a list of predefined short text messages only after successfully logged in the two-
Factor Authentification.
Allows easy access to a set of preprogrammed visual and audio settings of the radio.
Recent Calls Allows easy access to the list of calls recently received or made.
Rekey Request Notifies the dispatcher you want a new encryption key.
Repeater Access
Button (RAB)
Allows user to manually send a repeater access codeword.
(Conventional
Only)
Reprogram
Request
(Trunking Only)
Request-To-Talk
(Conventional
Only)
Scan
Scan List
Programming
Secure
Transmission
Select
(Conventional and Trunking)
Notifies the dispatcher you want a new dynamic regrouping assignment.
Notifies the dispatcher you want to send a voice call.
Toggles scan on or off.
Selects the scan list for editing
(by long press on the Scan button).
Toggles the Secure
Transmission On or Off when the Secure/Clear Strapping fields is set to Select for the current channel and when the radio is model/option capable.
Calls an assigned radio.
Selective Call
(Conventional
Only)
Site Display/
Search (Trunking
Only)
Displays the current site ID and
RSSI value; performs site search for Automatic Multiple
Site Select (AMSS) or
SmartZone operation.
Locks onto a specific site.
Site Lock/Unlock
(Trunking Only)
Status (Astro 25
Trunking Only)
Talkaround/
Direct
(Conventional
Only)
Talkgroup
(Conventional
Only)
Text Messaging
Service (TMS)
Sends data calls to the dispatcher about a predefined status.
Toggles between using a repeater and communicating directly with another radio.
Allows a call from an individual radio to a group of radios.
Selects the text messaging menu.
TMS Quick Text Selects a predefined message.
User Automatically registers with the server.
Zone Select
Enhanced Zone
Bank
Allows selection from a list of zones.
Basic Zone Bank Provides access from up to 6 zones by toggling between 2 banks of 3 zones, one group of
3 (A, B and C) to a second group of 3 zones (D, E and F).
Provides access from up to 75 zones by toggling between 25 banks (A, B ... X or Y) of 3 zones.
Assignable Settings or Utility Functions
Keypad/Controls
Lock
Light/Flip
TX Power Level
Locks or unlocks the keypad, programmable buttons, switches or rotary knobs.
Press the button to toggle the display backlight on or off; press and hold the button to reverse the content of the top display.
Toggles transmit power level between high and low.
English
33
Voice
Announcement
Audibly indicates the current feature mode, Zone or
Channel the user has just assigned.
Voice Mute Toggles voice mute on or off.
Volume Set Tone Sets the volume set tone.
Accessing the Preprogrammed Functions
You can access various radio functions through one of the following methods.
• A short or long press of the relevant programmable buttons.
• Use the Menu Select Button.
• Use the Menu Select and Navigation buttons.
E
D
C
A
B
C
D
E
A
B
Softkeys
Menu Select Buttons
Data Feature Button
4–Way Navigation Button
Home Button
Menu Select Buttons
Note:
Check with your dealer or system administrator for the list of features activated in your radio.
Use the Menu Select button to access the menu entry of your radio feature. Your radio may be
34
English
preprogrammed differently from the following example, but the steps for selecting a channel may appear as shown below:
Press the Menu Select button directly below Chan .
Home Button
Pressing the button returns you to the Home
(default) screen. In most cases, this is the current mode. For selected radio features, the button is also used to save user-edited radio settings or information before returning you to the Home screen.
Note:
Some features do not require you to press to go to the Home screen. Refer to the individual feature sections in this manual for further details on saving user-edited radio settings or information.
4-Way Navigation Button
Use the 4-Way Navigation Button to scroll up, down, left or right with one of the following methods.
• Press and release one of the button to scroll from one entry to the next one.
• Press and hold one of the button to have the radio toggles through the list automatically (release the button to stop).
Data Feature Button
Use Data Feature button to access data-related features, such as the Text Messaging Service (TMS) feature screen.
Keypad
You can use the 3 x 4 alphanumeric keypad to access your radio features. The keypad functions in a manner similar to a standard telephone keypad when entering numeric digits. When the keypad is used to edit a list, each key can generate different characters of the alphabet. The following tables show the number of times a key needs to be pressed to generate the required character.
English
35
36
Keypad Characters – Uppercase Mode
Key Number of Times Key is Pressed
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
1 .
, ?
!
; @ _ * # & $ / + = \ “ ‘ ( )
A B C
D E F
G H I
J K L
M N O
P Q R S
T U V
W X Y Z
Toggle between mixed case mode, uppercase mode and lowercase mode.
Space
Toggle between numeric and letter mode.
English
Keypad Characters – Lowercase Mode
Key Number of Times Key is Pressed
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
1 .
, ?
!
; @ _ * # & $ / + = \ “ ‘ ( ) a b c d e f j g h i k l m n o p q r s t u v w x y z
Toggle between mixed case mode, uppercase mode and lowercase mode.
Space
Toggle between numeric and letter mode.
English
37
38
Keypad Characters – Numeric Mode
Key Number of Times Key is Pressed
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
1 .
, ?
!
; @ _ * # & $ / + = \ “ ‘ ( )
2
3
6
7
4
5
8
9
0
Space
Toggle between numeric and letter mode.
English
Keypad Characters – Hexadecimal Mode
Key Number of Times Key is Pressed
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
1
2 A B C
3 D E F
6
7
4
5
8
9
0
Not applicable
Not applicable
English
39
Push-To-Talk (PTT) Button
A
40
English
The PTT button on the side of the radio serves two basic purposes:
• While a call is in progress, the PTT button allows the radio to transmit to other radios in the call.
Press and hold down PTT button to talk. Release the PTT button to listen. The microphone is activated when the PTT button is pressed.
• While a call is not in progress, the PTT button is used to make a new call. See
Radio Call on page 61 for more information.
Identifying Status Indicators
Status Icons
The 130 x 130 pixel front liquid crystal display (LCD) of your radio shows radio status, text entries, and menu entries. The top two display rows contain color icons that indicate radio operating conditions.
Selected icons are also shown on the first row of the
112 x 32 pixel top monochrome display screen of your radio. The following icons are for the front display screen unless indicated otherwise.
Receiving
Radio is receiving a call or data.
Top Display:
Top Display:
Transmitting
Radio is transmitting a call or data.
Call Received
Radio has received an Individual Call.
Top Display:
Battery
For IMPRES
™
battery operation only – the icon shown indicates the charge remaining in the battery.
For all battery operation – the icon blinks when the battery is low.
Top Display:
Received Signal Strength Indicator
(RSSI)
The number of bars displayed represents the received signal strength for the current site, for trunking only. The more stripes in the icon, the stronger the signal.
Roaming
The radio has roamed to and is currently registered to a foreign system.
41
English
Top Display:
42
English
Top Display:
Direct
On – Radio is currently configured for direct radio-to-radio communication (during conventional operation only).
Off – Radio is connected with other radios through a repeater.
Top Display:
Monitor (Carrier Squelch)
Selected channel is being monitored
(during conventional operation only).
In-Call User Alert
On – The feature is enabled. Voice muting of the affiliated trunking talkgroup or selected conventional channel is activated.
Off – The feature is disabled. Voice muting of the affiliated trunking talkgroup or selected conventional channel is deactivated.
or
Top Display:
or
Power Level
L – Radio is set at Low power.
H – Radio is set at High power.
Top Display:
Scan
Radio is scanning a scan list.
Top Display:
Priority Channel Scan
Blinking dot – Radio detects activity on channel designated as Priority-One.
Steady dot – Radio detects activity on channel designated as Priority-Two.
Top Display:
View/Program Mode
Radio is in the view or program mode.
On steady – View mode
Blinking – Program mode
Top Display:
Vote Scan Enabled
The vote scan feature is enabled.
Top Display: or
or
Basic Zone Bank 1
A – Radio is in Zone 1.
B – Radio is in Zone 2.
C – Radio is in Zone 3.
Top Display: or
or
Basic Zone Bank 2
D – Radio is in Zone 4.
E – Radio is in Zone 5.
F – Radio is in Zone 6.
Top Display: or
,
, until
Enhanced Zone Bank
A – Contains Zone 1, Zone 2 and Zone
3,
B – Contains Zone 4, Zone 5 and Zone
6,
C – Contains Zone 7, Zone 8 and Zone
9, until
X – Contains Zone 70, Zone 71 and
Zone 72,
Y – Contains Zone 73, Zone 74 and
Zone 75.
Top Display:
Secure Operation
On – Secure operation.
Off – Clear operation.
Blinking – Receiving an encrypted voice call.
English
43
44
English
AES Secure Operation
On – AES secure operation.
Off – Clear operation.
Blinking – Receiving an encrypted voice call.
GPS Signal
On – Feature is enabled and signal is available.
Off – Feature is disabled.
Blinking – Feature is enabled, but no signal is available.
User Login Indicator (IP Packet Data)
On – User is currently associated with the radio.
Off – User is currently not associated with the radio.
Blinking – Device registration or user registration with the server failed due to an invalid username or pin.
Inverted – User successfully login to the secured IP Packet Data.
Data Activity
Data activity is present.
Hexadecimal
Indicates that the text entry is currently in hexadecimal mode.
Numeric
Indicates that the text entry is currently in numeric mode.
Start Case
Indicates that the first character of the text entry is capitalized.
Mixed Case
Indicates that the text entry is currently in normal text mode.
Uppercase
Indicates that the text entry is currently in uppercase mode.
Lowercase
Indicates that the text entry is currently in lowercase mode.
Lowercase Predictive
Indicates that the text entry is currently in lowercase and with predicted words shown at the bottom of the screen.
Mixedcase Predictive
Indicates that the text entry is currently in mixed case and with predicted words shown at the bottom of the screen.
Uppercase Predictive
Indicates that the text entry is currently in uppercase and with predicted words shown at the bottom of the screen.
Top Display:
Bluetooth On
Bluetooth is on and ready for Bluetooth connection.
Top Display:
Bluetooth Connected
Bluetooth is currently connected to the external Bluetooth device.
Text Messaging Service (TMS) Indicators
This feature allows you to send and receive text messages. Status icons and menu options shown here help you to work more efficiently with TMS
feature. See Text Messaging Service (TMS)
on page
101 for more information.
English
45
46
TMS Status Icons
The following icons appear on the radio’s display when you send and receive text messages.
Inbox Full
The Inbox is full.
Message Sent
The text message is sent successfully.
Message Unsent
The text message cannot be sent.
Unread Message
• User receives a new message.
• The selected text message in the Inbox has not been read.
Read Message
The selected text message in the Inbox has been read.
Normal Message
English
User is composing a message with normal priority and without a request for a reply.
Message Index
Indicates the index of the current message the user is viewing.
Example: If the user is looking at the third message out of a total of 6 messages in the Inbox folder, the icon is displayed as the icon on the left column.
Priority Status
• The “Priority” feature is toggled on before the message is sent.
• Messages in the Inbox folder are flagged with “Priority”.
Request Reply
• The “Request Reply” feature is toggled on before the message is sent.
• Messages in the Inbox folder are flagged with “Request Reply”.
Priority Status and Request Reply
• User is composing a message with a priority status and a request for a reply.
• Messages in the Inbox folder are flagged with “Priority” and “Request Reply”.
TMS Menu Options
Menu
Option
Back
Clr
Del
Edit
Exit
No
Optn
Rply
Sel
Description/Function
Brings you back to the previous screen.
Deletes all messages.
Deletes a message or text.
Brings you to the edit screen.
Exits to the Home screen.
Returns to the previous screen.
Brings you to the Options main screen.
Replies to a message.
Selects the highlighted command.
Menu
Option
Send
Yes
Description/Function
Sends the message.
Updates or saves a command.
Call Type Icons
The following icons appear on the radio’s main display, when you make or receive a call, or view selected call lists, to indicate the different call types associated with an alias or ID.
Radio number.
Radio number added to a Call List.
Mobile number.
Mobile number added to a Call List.
English
47
Landline phone number.
Landline phone number added to a Call
List.
Incoming call or data.
Outgoing call or data.
Incoming emergency call.
LED Indicator
The LED indicator shows the operational status of your radio.
A
Solid red
Blinking red
Double blinking red
Rapidly blinking red
Radio is transmitting.
Radio is transmitting at low battery condition.
Radio is in Emergency Mode.
Radio has failed the self test upon powering up or encountered a fatal error.
Channel is busy.
Solid yellow
(Conventional
Only)
Blinking yellow Radio is receiving a secured transmission.
48
English
Solid green
Blinking green
Radio is powering up, or is on a non-priority channel while in the Scan List Programming mode.
Radio is receiving an individual or telephone call, or is on a
Priority-Two channel while in the Scan List Programming mode.
Rapidly blinking green
Radio is on a Priority-One channel while in the Scan List
Programming mode.
Note:
No LED indication when the radio receives a clear (non-secured) transmission in trunking
Mode. LED indication can be preprogramed by qualified technician to be permanently disabled. Consult your dealer for further details if you want to disable it.
Intelligent Lighting Indicators
This feature temporarily changes the backlight of the top display screen, and adds a color bar to the main display screen to help signal that a radio event has occurred.
Note:
This feature must be preprogrammed by a qualified radio technician.
Backlight and Bar
Color
Orange
Notification
Emergency Alerts
When
The radio initiates an emergency alarm or call.
The radio receives an emergency alarm or call.
The radio initiates the Man Down Post-Alert timer.
English
49
Backlight and Bar
Color
Notification
Red
Green
Critical Alerts
Call Alerts
When
The radio initiates Fireground Evacuation alarm.
The radio battery is low.
The radio is out of range.
The radio enters Failsoft mode.
The radio is unable to establish a full connection with the system.
The radio is unable to authenticate or register with the system.
The radio lost GPS signal or GPS function fails.
The radio receives a private call.
The radio receives a phone call.
The radio receives a call alert.
The radio receives a selective call.
The radio enters Geofence.
50
Alert Tones
Your radio uses alert tones to inform you of the condition of your radio. The following table lists these tones and when they occur.
English
You Hear
Short, Low-
Pitched Tone
Long, Low-
Pitched Tone
Tone Name
Radio Self Test Fail
Reject
Time-Out Timer Warning
No ACK Received
Individual Call Warning
Tone
Heard
When radio fails its power-up self test.
When an unauthorized request is made.
Four seconds before time out.
When radio fails to receive an acknowledgment.
When radio is in an individual call for greater than 6 seconds without any activity.
Man Down Entry When radio initiates Man Down mode.
Time-Out Timer Timed Out After time out.
Talk Prohibit/PTT Inhibit (When PTT button is pressed) transmissions are not allowed.
Lack of Voice PTT Time out When the radio ends your call after it detected there is lack of voice for 60 seconds after the PTT is pressed and hold. Your radio ends the call to enable your radio to receive calls from other radio users. The duration of this timer can be preprogrammed by a qualified radio technician.
Out of Range
Invalid Mode
(When PTT button is pressed) the radio is out of range of the system.
When radio is on an unpreprogrammed channel.
English
51
52
English
You Hear
A Group of
Low-Pitched
Tones
Tone Name
Busy
Heard
When system is busy.
Short, Medium-
Pitched Tone
Valid Key-Press
Radio Self Test Pass
Clear Voice
When a correct key is pressed.
When radio passes its power-up self test.
At beginning of a non-coded communication.
Priority Channel Received When activity on a priority channel is received.
When entering the emergency state.
Emergency Alarm /Call Entry
Central Echo
Volume Set Long, Medium-
Pitched Tone
A Group of Medium-Pitched
Tones
Emergency Exit
Failsoft
Automatic Call Back
Keyfail
Console Acknowledge
When central controller has received a request from a radio.
When volume is changed on a quiet channel.
When exiting the emergency state.
When the trunking system fails.
When voice channel is available from previous request.
When encryption key has been lost.
When status, emergency alarm, or reprogram request ACK is received.
You Hear
Gurgle
Tone Name
Received Individual Call
Call Alert Sent
Site Trunking
Low-Battery Chirp Short, High-
Pitched Tone
(Chirp)
Two High-
Pitched Tones
Ringing
GPS Fails
Fast Ringing
Enhanced Call Sent
Phone Call Received
Dynamic Regrouping
Talk Permit
Unique, Low-
Pitched Chirp
Unique, High-
Pitched Chirp
New Message
Priority Status
Heard
When Call Alert or Private Call is received.
When Call Alert is received by the target radio.
When a SmartZone trunking system fails.
When battery is below preset threshold value.
When the GPS signal is lost or when GPS fails.
When system is searching for target of Private Call.
When waiting for target of Private Call to answer the call.
When a land-to-mobile phone call is received.
(When PTT button is pressed) a dynamic ID has been received.
(When PTT button is pressed) is verifying with the system for accepting its transmissions.
When a new message is received.
When a priority message is received.
English
53
You Hear
Incremental-
Pitched Tone
Decremental-
Pitched Tone
A Group of
Very High-
Pitched Tones
Unique Low-
High Tone
Unique High-
Low Tone
Tone Name
Bluetooth Paired
Heard
When Bluetooth accessory is paired with the radio.
Bluetooth Connected
Bluetooth Unpaired
Bluetooth Disconnected
Man Down Continuous
Tone
When Bluetooth accessory is connected to the radio.
When Bluetooth accessory is unpaired from the radio.
When Bluetooth accessory is disconnected from the radio.
When radio is in Man Down mode and prepares to transmit
Emergency Alarm when the timer of this alarm ends.
Critical Man Down Continuous Tone
When radio is in Man Down Enhanced mode and prepares to transmit Emergency Alarm when the timer of this alarm ends.
Enhanced Zone Bank Up When EZB Up button is pressed to scroll the Enhance Zone
Bank up.
Enhanced Zone Bank Down When EZB Down button is pressed to scroll the Enhance Zone
Bank down.
Phone Call Displays and Alerts
The following phone call displays and alerts appears on the radio’s display when you make and receive Phone calls.
The radio also uses alert tones to indicate the current status.
54
English
You Hear
A Long Tone
A Busy Tone
–
You See
No phone
Phone busy
Phone busy
A High- Pitched
Tone
–
No acknowledge
When
You press the PTT button and the phone system is not available.
Notes
Press to hang up. The radio returns to the
Home screen.
The phone system is busy.
Press to exit the phone mode and try your call later.
When a channel is not available.
The radio automatically connects when a channel opens.
The call is not acknowledged.
When you release the PTT button.
Press to hang up. The radio returns to the
Home screen.
The radio indicates to the landline party that he or she may begin talking.
Note:
You have the option of sending additional digits (overdial), such as an extension number, or credit card or
PIN numbers, to the phone system. If the radio is preprogrammed for live overdial, every digit entered after the call is connected is sent to the phone system.
If the radio is preprogrammed for buffered overdial, the digits pressed are entered into memory and then sent when the PTT button is pressed. Press the PTT button to send either digits or voice, but not both at the same time.
English
55
56
General Radio Operation
Selecting a Zone
Your radio must be preprogrammed to allow you to use this feature.
A zone is a group of channels. The following methods are options on how to select a radio zone. The result of all the methods is the same. You can use the options interchangeably depending on your preference and the programmed functions.
• Select a zone via the preprogrammed Zone (3-
Position A/B/C) switch: a) Move the preprogrammed Zone (3-Position
A/B/C) switch to the position of the required zone.
If the zone number entered is unprogrammed, the display shows Invalid entry . Repeat this step.
b) Press the PTT button to transmit on the displayed zone channel.
• Select a zone via the radio menu Zone : a) or to
Zone and press the Menu Select button directly below Zone .
b) or to the required zone, or use the keypad to enter the zone number.
If the zone number entered is unprogrammed, the display shows Invalid entry . Repeat this step.
c) Press the Menu Select button directly below
Sel to confirm the displayed zone.
d) Press the PTT button to transmit on the displayed zone channel.
• Select a zone via the radio menu ZnUp or ZnDn : a) or to
ZnUp or ZnDn .
b) Press and hold the Menu Select button directly below ZnUp or ZnDn until the required zone appears.
Positions of ZnUp and ZnDn on the display may differ each time you release the Menu Select button. Read carefully before you press.
c) Press the PTT button to transmit on the displayed zone channel.
Selecting a Radio Channel
English
A channel is a group of radio characteristics, such as transmit/ receive frequency pairs. The following methods are options on how to select a radio channel. The result of all the methods is the same.
You can use the options interchangeably depending on your preference and the programmed functions.
• Select a channel via the preprogrammed 16–
Position Select Knob to the desired channel.
a) Rotate the preprogrammed 16–Position
Select Knob to the desired channel.
b) Press the PTT button to transmit on the displayed zone channel.
• Select a channel via the radio menu Chan : a) or to
Chan .
b) Press the Menu Select button directly below
Chan .
c) or to the required channel or use the keypad to enter the channel number.
If the channel number entered is unprogrammed, the display shows Invalid entry .
Repeat this step.
d) Press the Menu Select button directly below
Sel to confirm the selected channel.
e) Press the PTT button to transmit on the displayed zone channel.
• Select a channel via the radio menu Channel Up or
Channel Down : a) or to ChUp or ChDn .
b) Press the Menu Select button directly below
ChUp or ChDn .
Positions of ChUp and ChDn on the display may differ each time you release the Menu Select button. Read carefully before you press.
c) Press the PTT button to transmit on the displayed zone and channel.
Selecting a Channel via Channel Search
Button
This feature allows you to do a quick search for a specific channel in your radio by keying in the alias of the channel. If the name matches, your radio prompts the first found matched channel name.
1 Perform one of the following actions:
• Press the preprogrammed Channel Search button.
57
English
58
English
•
or to CSrh and press the Menu Select button directly below CSrh .
A blinking cursor appears on the Channel Search screen.
2 Use the keypad to type or edit your channel name.
3 To initiate searching, press the Menu Select button directly below CSrh once the entry is done.
To exit this procedure, press the Menu Select button directly below Cncl .
The display shows Searching . Once found, the display shows the matched channel name and the radio changed its transmission to the selected channel.
If the radio is triggered to search for an empty entry, the display shows Invalid entry . Repeat step
search again.
If the entry does not match, the display shows Channel name not found
to search again; or press or the Menu Select button directly below
Exit to exit.
Mode Select Feature
Mode Select allows a long press to save the current zone and channel of your radio to a programmable button, keypad button, or a softkey; then once programmed, the short-press of that button or softkey changes the transmission to the saved zone and channel.
There are two methods to save the selected zone and channel:
• Softkeys
• Programmable buttons and keypad buttons (digit 0 to 9)
Note:
Your radio must be preprogrammed to allow you to use this feature.
Saving a Zone and a Channel to a Softkey
Five softkeys are available for you to save the frequently used zone and channel.
1 Toggle your zone and channel to the required zone and channel.
2
or to MS1 , MS2 ... or MS5 .
3 Press and hold the Menu Select button directly below one of the softkey ( MS1 – MS5 ).
You hear a short, medium-pitched tone when the zone and channel is saved.
Note:
To change the programmed zone and channel, repeat this procedure.
Short press of the programmed softkey changes your current transmission to the zone and channel programmed in this softkey.
Saving a Zone and a Channel to a Button
You can save the frequent used zone and channel to the programmable buttons and keypad digit 0 to 9 buttons.
1 Toggle your zone and channel to the required zone and channel.
2 Press and hold the button you desire to program.
You hear a short, medium-pitched tone when the zone and channel is saved.
Note:
Repeat this procedure to change the zone and channel of the programmed button.
Short press of the programmed button changes your current transmission to the zone and channel programmed in this button.
Receiving and Responding to a Radio Call
Once you have selected the required channel and/or zone, you can proceed to receive and respond to calls.
The LED lights up solid red while the radio is transmitting. In conventional mode, the LED lights up solid yellow when the radio is receiving a transmission. In trunking mode, there is no LED indication when the radio receives a transmission.
If the radio is receiving a secure transmission, the
LED blinks yellow.
Receiving and Responding to a Talkgroup Call
To receive a call from a group of users, your radio must be configured as part of that talkgroup.
When you receive a talkgroup call (while on the Home screen) the radio triggers for your attention with one 59
English
of the following scenarios depending on the system your radio is configured:
• For ASTRO Conventional system, the LED lights up solid yellow. The display shows the talkgroup alias or ID, and the caller alias or ID.
• For Trunking system, the display shows the caller alias or ID.
1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
2 Press the PTT button to respond to the call.
The LED lights up solid red.
3 Release the PTT button to listen.
60
See also Making a Talkgroup Call on page 62 for
details on making a Talkgroup Call.
Receiving and Responding to a Private Call (Trunking
Only)
A Private Call is a call from an individual radio to another individual radio.
The one-to-one call between the two radios are not heard by the others in the current talkgroup. The calling radio automatically verifies that the receiving
English radio is active on the system and can display the caller ID.
Note:
With the inactivity timer enabled (optional), when there is no response from the receiving radio, the calling radio exits the call with Menu
Inactive Exit tone after the timer expires.
When you receive a Private Call, you hear two alert tones and the LED blinks green. The display shows
Call received and the call received icon blinks.
1 Perform one of the following actions:
• Press the Menu Select button directly below
Resp .
• Press the Call Response button within 20 seconds after the call indicators begin.
If the caller alias is in the call list, the display shows the caller alias during the call.
If the caller name is not in the call list, the display shows the caller ID.
2 Press and hold the PTT button to talk. Release the
PTT button to listen.
3 Press or the Call Response button to hang up and return to the Home screen.
See also Making a Private Call (Trunking Only)
on page 62 for details on making a Private Call.
Receiving and Responding to a Telephone Call
(Trunking Only)
This feature allows you to receive calls similar to standard phone calls from a landline phone.
Note:
With the inactivity timer enabled (optional), if there is no response to the call after the timer expires, your radio exits the call with Menu
Inactive Exit tone.
When you receive a Telephone Call, you hear a telephone-type ringing and the LED blinks green. The backlight of the screen and the bar turns green.The
display shows Phone Call and the call received icon blinks.
1 Press the Call Response button within 20 seconds after the call indicators begin.
2 Press and hold the PTT button to talk. Release the
PTT button to listen.
3 Press or the Call Response button to hang up and return to the Home screen.
See also Making a Telephone Call (Trunking Only)
on page 64 for details on making a Telephone Call.
Methods to Make a Radio Call
You can select a zone, channel, subscriber ID, or talkgroup by using:
• The preprogrammed Zone switch.
• The 16-Position Select Channel Knob.
• A preprogrammed One Touch Call button.
• The Contacts list (see
on page 79).
Note:
The radio automatically exits the feature, if the feature inactivity timer is enabled, when the radio is left idle and the timer expires. You will hear the Menu Inactive Exit Tone upon feature exit.
English
61
Making a Talkgroup Call
To make a call to a group of users, your radio must be configured as part of that talkgroup.
1 Turn the 16-Position Select Channel Knob to select the channel with the desired talkgroup.
2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
3 Press the PTT button to make the call.
The radio shows different indicators based on the system the radio is configured.
• For ASTRO Conventional system, the LED lights up solid red. The display shows the talkgroup alias or ID.
• For Trunking system, the LED lights up solid red.
4 Speak clearly into the microphone.
5 Release the PTT button to listen.
62
Making a Private Call (Trunking Only)
Your radio must be preprogrammed to allow you to use this feature.
English
This feature allows you to send an individual Call
Alert or page if there is no answer from the target radio.
1 Perform one of the following actions:
• To access this feature via a preprogrammed button, press the preprogrammed Quick
Access (One-Touch) Private Call button to dial the preprogrammed ID (number) and initiate the Private Call. Proceed to step
.
• To access this feature via the menu, proceed to the next step.
2
or to Call , and press the Menu Select button directly below Call .
The display shows the last transmitted or received
ID.
3 To select the required ID, perform one of the following actions:
• Press the Menu Select button directly below
Cnts to scroll through and select the required
ID.
• Press the Menu Select button directly below
LNum to go to the last number dialed.
• or to the required ID.
• Use the keypad to enter the required ID.
4 Press the PTT button to initiate the Private Call.
The display shows Calling... <Number> .
5 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
When you are connected, the display shows the
ID of the target radio.
If no acknowledgment is received, the display shows No acknowledge .
6 Press and hold the PTT button to talk. Release the
PTT button to listen.
7 Press to return to the Home screen.
Making an Enhanced Private Call (Trunking Only)
Your radio must be preprogrammed to allow you to use this feature.
This feature allows you to send an individual Call
Alert Page if there is no answer from the target radio.
on page 83 for more information.
1 Perform one of the following actions:
• To access this feature via a preprogrammed button, press the preprogrammed Quick
Access (One-Touch) Enhanced Private Call button to dial the preprogrammed ID (number)
and initiate the Private Call. Proceed to step 5
.
• To access this feature via the menu, proceed to the next step.
2
or to Call , and press the Menu Select button directly below Call .
The display shows the last transmitted or received
ID.
3 To select the required ID, perform one of the following actions:
• Press the Menu Select button directly below
Cnts to scroll through and select the required
ID.
• Press the Menu Select button directly below
LNum to go to the last number dialed.
• or to the required ID.
• Use the keypad to enter the required ID.
4 Press the PTT button to initiate the Private Call.
63
English
The display shows Calling... <Number> .
5 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
When you are connected, the display shows the
ID of the target radio.
If no acknowledgment is received, the display shows No acknowledge .
If the target radio does not respond before the time out, the display shows No answer .
6 Press and hold the PTT button to talk. Release the
PTT button to listen.
7 Press to return to the Home screen.
Making a Telephone Call (Trunking Only)
This feature allows you to make calls similar to standard phone calls to a mobile or landline phone.
1 Perform one of the following actions:
• To access this feature via a preprogrammed button, press the preprogrammed Quick
Access (One-Touch) Phone Call button to
64
English dial the preprogrammed phone number.
• To access this feature via the menu, proceed to the next step.
2
or to Phon , and press the Menu Select button directly below Phon .
The display shows the last transmitted or received
ID.
3 To select the required ID, perform one of the following actions:
• Press the Menu Select button directly below
Cnts to scroll through and select the required
ID.
•
• Press the Menu Select button directly below
LNum to go to the last number dialed.
or to the required phone number.
• Use the keypad to enter the required phone number.
4 Press the PTT button to dial the phone number.
5 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
6 When your call is answered, press and hold the
PTT button to talk. Release the PTT button to listen.
7 Press to return to the Home screen.
See Phone Call Displays and Alerts
on page 54 for more information if your call is NOT answered.
Switching Between Repeater or Direct
Operation Button
The Repeater Operation increases the radio coverage area by connecting with other radios through a repeater. The transmit and receive frequencies are different.
The Direct or “talkaround operation” allows you to bypass the repeater and connect directly to another radio. The transmit and receive frequencies are the same.
Perform one of the following actions:
• Press the preprogrammed Repeater/Direct switch to toggle between talkaround and repeater modes.
•
or to Dir and press the Menu Select button directly below Dir .
The display shows Repeater mode if the radio is currently in Repeater mode.
The display shows Direct mode and the Talkaround icon if the radio is currently in Direct mode (during conventional operation only).
Monitor Feature
Radio users who switch from analog to digital radios often assume that the lack of static on a digital channel is an indication that the radio is not working properly. This is not the case.
Digital technology quiets the transmission by removing the noise from the signal and allows only the clear voice or data information to be heard.
Use the Monitor feature to make sure a channel is clear before transmitting.
Monitoring a Channel
The following methods are options on how to monitor a channel. The result of all the methods is the same.
English
65
66
English
You can use the options interchangeably depending on your preference and the programmed functions.
• Monitoring a Channel with Volume Set button.
a) Select the desired zone and channel.
b) Press and hold the Volume Set button to hear the volume set tone.
c) Adjust the Volume Control Knob if necessary.
d) Release the Volume Set button.
e) Press and hold the PTT button to transmit.
The LED lights up solid red.
f) Release the PTT button to receive (listen).
• Monitoring a Channel with Monitor button.
a) Press the preprogrammed Monitor button.
b) Adjust the Volume Control Knob if necessary.
c) Press and hold the PTT button to transmit.
The LED lights up solid red.
d) Release the PTT button to receive (listen).
The Carrier Squelch indicator appears on the display when you monitor a channel via the preprogrammed Monitor button.
• Monitoring a Channel via the selected zone channel.
a) Select the desired zone and channel.
b) Listen for a transmission.
c) Adjust the Volume Control Knob if necessary.
d) Press and hold the PTT button to transmit.
The LED lights up solid red.
e) Release the PTT button to receive (listen).
Monitoring Conventional Mode
Your radio may be preprogrammed to receive Private-
Line
®
(PL) calls.
1 Momentarily press the Monitor button to listen for activity.
The Carrier Squelch indicator appears on the display.
2 Press and hold the Monitor button to set continuous monitor operation.
The duration of the button press is programmable.
3 Press the Monitor button again, or the PTT button, to return to the original squelch setting.
If you try to transmit on a receive-only channel, you hear an invalid tone until you release the PTT button.
Advanced Features
Advanced Call Features
Selective Call (ASTRO Conventional Only)
This feature allows you to receive a call from or to call a specific individual. It is intended to provide privacy and to eliminate the annoyance of having to listen to conversations that are of no interest to you.
Receiving a Selective Call
When you receive a Selective Call, the radio initiates for your attention with one of the following indication scenario:
• You hear two alert tones and the LED lights up solid yellow to indicate the transmitting radio is still sending signal. The call received icons blinks and the display shows Call received .
• The LED blinks solid green once to indicate the transmitting radio is pending to receive signal.
The speaker unmutes.
1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
2 Press and hold the PTT button to talk. Release the
PTT button to listen.
Making a Selective Call
1 Perform one of the following actions:
• To access this feature via a preprogrammed button, press the preprogrammed Quick
Access (One-Touch) Selective Call button to dial the preprogrammed ID. Proceed to step
.
• To access this feature via the menu, proceed to the next step.
2
or to Call , and press the Menu Select button directly below Call .
The display shows the last transmitted or received
ID.
3 To select the required ID, perform one of the following actions:
• Press the Menu Select button directly below
Cnts to scroll through and select the required
ID.
• Press the Menu Select button directly below
LNum to go to the last number dialed.
67
English
• or to the required ID.
• Use the keypad to enter the required ID.
4 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
5 Press and hold the PTT button to start the
Selective Call.
The display shows the ID of the target radio.
6 Release the PTT button to listen.
7 Press to return to the Home screen.
Talkgroup Call Feature (Conventional Operation Only)
This feature allows you to define a group of conventional system users so that they can share the use of a conventional channel.
Note:
Encryption keys are associated to talkgroups.
When talkgroups are associated, encryption keys are changed by changing the active
talkgroup. See Secure Operations
on page
117 for more information.
68
English
Selecting a Talkgroup
1
or to Tgrp and press the Menu Select button directly below Tgrp .
The display shows the last Talkgroup that was selected and stored.
2 Perform one of the following actions:
• or to Preset for the preset preprogrammed
Talkgroup.
• or to the required Talkgroup.
• Use the keypad to enter the number of the corresponding Talkgroup in the list.
3 Press the Menu Select button directly below Sel to save the currently selected Talkgroup and return to the Home screen.
If the encryption key associated to the new
Talkgroup is erased, you hear a momentary key fail tone and the display shows Key fail .
If the encryption key that is associated to the new
Talkgroup is not allowed, you hear a momentary key fail tone and the display shows Illegal key .
4 Press to return to the Home screen.
Sending a Status Call
This feature allows you to send data calls to the dispatcher about a predefined status.
Each status can have up to a 14-character name. A maximum of eight status conditions is possible.
Note:
The radio automatically exits the feature, if the feature inactivity timer is enabled, when the radio is left idle and the timer expires. You will hear the Menu Inactive Exit Tone upon feature exit.
1 Perform one of the following actions:
•
• Press the preprogrammed Status button.
or to Sts and press the Menu Select button directly below Sts .
The display shows the last acknowledged status call, or the first status in the list.
2 Perform one of the following actions:
• Use the keypad to enter a number corresponding to the location in the status list.
3 Press the PTT button to send the status.
When the dispatcher acknowledges, you hear four tones and the display shows Ack received . The radio returns to normal dispatch operation.
If no acknowledgment is received, you hear a lowpitched tone and the display shows No acknowledge
4 Press
.
to return to the Home screen.
No traffic is heard on trunked channels while
Status Calls is selected. If the radio detects no
Status Call activity for six seconds, an alert tone sounds until you press or the PTT button.
Responding to the Dynamic Regrouping Feature
(Trunking Only)
This feature allows the dispatcher to temporarily reassign selected radios to a particular channel where they can communicate with each other. This feature is typically used during special operations and is enabled by a qualified radio technician.
You will not notice whether your radio has this feature enabled until a dynamic regrouping command is sent by the dispatcher.
69
English
70
English
Note:
If you try to access a zone or channel that has been reserved by the dispatcher as a dynamically regrouped mode for other users, you hear an invalid tone.
When your radio is dynamically regrouped, it automatically switches to the dynamically regrouped channel. You hear a Gurgle tone and the display shows the dynamically regrouped channel’s name.
Press the PTT button to talk. Release PTT button to listen.
When the dispatcher cancels dynamic regrouping, the radio automatically returns to the zone and channel that you were using before the radio was dynamically regrouped.
Requesting a Reprogram (Trunking Only)
This feature allows you to notify the dispatcher when you want a new dynamic regrouping assignment.
Perform one of the following actions:
• Press the preprogrammed Reprogram
Request button to send reprogram request to the dispatcher.
•
or to Rpgm then press the Menu Select button directly below Rpgm to send reprogram request to the dispatcher.
The display shows Reprgrm rqst and Please wait .
If you hear five beeps, the dispatcher has acknowledged the reprogram request. The display shows Ack received and the radio returns to the Home screen.
If the dispatcher does not acknowledge the reprogram request within six seconds, you hear a low-pitched alert tone and the display shows No acknowledge . Try again or press to cancel and return to the Home screen.
Classification of Regrouped Radios
The dispatcher can classify regrouped radios into either of two categories:
Select
Enabled
Select-enabled radios are free to change to any available channel, including the dynamic-regrouping channel, once the user has selected the dynamic-regrouping position.
Select
Disabled
Select-disabled radios cannot change channels while dynamically regrouped.
The dispatcher has forced the radio to remain on the dynamic-regrouping channel.
The Scan or Private Call feature cannot be selected while your radio is Select Disabled.
Dynamic Zone Programming (DZP)
Note:
Your radio must be preprogrammed to allow you to use this feature. This feature works on the condition at least one zone in the radio must be a non-dynamic zone.
This feature provides one or more Dynamic Zones to store the frequent used channels be it conventional or trunking. These dynamic channels are saved from pre-existing (non-dynamic) channels in the radio. This saves the time and effort from the regular navigation around the working zones and channels. User can also delete or update the list in the Dynamic Zone.
Entering the Dynamic Zone to Select a Dynamic
Channel
1
or to Zone then press the Menu Select button directly below Zone .
The display shows the Zone screen.
2 or to <# Dynamic Zone Channels> .
[2]
3 Perform one of the following actions:
• Press the Menu Select button below Sel to select.
• Press the Menu Select button below Exit to exit.
If you have selected one of the Dynamic Zone
Channels list, the display returns to Home screen with the selected <# Dynamic Zone Channels> shown on the screen.
[2]
If you have selected Exit without selecting any
Dynamic Zone Channels list, the display returns to
Home screen without any changes.
2
# indicates number of the channel on the 16-Position Switch which are numbered from 1 to 16.
English
71
72
English
Saving a Channel in the Dynamic Zone from List
Selection
The radio must be in Dynamic Zone in order to perform this operation.
1
or to ZnPr . Press the Menu Select button directly below ZnPr to enter Program Zone screen.
2 Press the Menu Select button directly below Edit .
The display shows Search Options screen.
3 or to List Selection . Press the Menu Select button directly below Sel .
The display shows Select Zone screen.
4 or to the required zone. Press the Menu
Select button directly below Sel .
The display shows Select Chan screen.
5 or to the required channel. Press the Menu
Select button directly below Sel .
The display shows Channel updated .
6 Press the Menu Select button directly below Exit to return to Home screen.
Saving a Channel in the Dynamic Zone from
Channel Name
The radio must be in Dynamic Zone in order to perform this operation.
1
or to ZnPr then press the Menu Select button directly below ZnPr to enter Program Zone screen.
2 Press the Menu Select button directly below Edit .
The display shows Search Options screen.
3 or to Channel Name then press the Menu
Select button directly below Sel .
The display shows a blinking cursor on the
Channel Name screen.
4 Use the keypad to type or edit the channel name.
5 Press the Menu Select button directly below Srch once the entry is done to initiate searching.
You can cancel this operation at this step by pressing the Menu Select button directly below
Cncl to return to Search Options screen.
The display shows Searching...
. Once found, the display shows Channel updated .
If the radio is triggered to search for an empty entry, the display shows Invalid entry.
If the entry does not match, the display shows
Channel name not found
search again.
6 Press to return to the Home screen.
Deleting a Channel in the Dynamic Zone
The radio must be in Dynamic Zone in order to perform this operation.
1
or to ZnPr then press the Menu Select button directly below ZnPr to enter Program Zone screen.
The display shows the dynamic channels list.
2 or to the saved dynamic channel then press the Menu Select button directly below Del .
The display shows Channel deleted screen.
3 Press the Menu Select button below Exit to return to Home screen.
The Home screen shows <Dynamic Zone
Channels> .
If the channel deleted is the Home channel, the
Home screen shows <Zone Name>+”Blank” .
Contacts
This feature provides “address-book” capabilities on your radio. Each entry corresponds to an alias (name) or ID (number) that you use to initiate a call.
Contact entries are alphabetically sorted according to entry alias. Each alias can have up to five IDs of different call types associated with it.
Additionally, each entry, depending on context
(conventional, trunking, or phone), associates with one or more of the four types of calls: Phone Call,
Selective Call, Private Call, or Call Alert.
Each entry within Contacts contains the following information:
• Call Alias (Name)
• Call ID (Number)
• Call Type (Icon)
• WACN ID (Astro 25 Trunking IDs only)
• System ID
73
English
74
Note:
Your radio must be preprogrammed to allow you to add, edit, or delete the contact entries.
Your radio also supports a maximum of 50 call lists.
Each list can store up to 100 IDs (numbers).
Note:
Your radio is preprogrammed with a number of contacts per Call Lists. Check with your dealer or system administrator for more information.
The radio automatically exits the feature, if the feature inactivity timer is enabled, when the radio is left idle and the timer expires. You hear the Menu Inactive Exit Tone upon feature exit.
Making a Private Call from Contacts
Your radio must be preprogrammed to allow you to use this feature.
1
or to Cnts and press the Menu Select button directly below Cnts .
The entries are alphabetically sorted.
2 or to the required subscriber alias.
English
3 Perform one of the following actions:
• Press the Menu Select button directly below
Optn and proceed to the next step.
•
or to scroll through the available IDs for the selected subscriber alias and proceed to step
.
4 or to Call and press the Menu Select button directly below Sel .
5 or to select the call type.
6 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
7 Press the PTT button to initiate the call.
During the call, the display shows the subscriber alias.
8 Press and hold the PTT button to talk. Release the
PTT button to listen.
The LED lights up solid red when the PTT button is pressed.
If there is no voice activity for a preprogrammed period of time, the call ends.
If the call reaches the maximum ring time, the call ends.
Adding a New Contact Entry
1
or to Cnts and press the Menu Select button directly below Cnts .
The entries are alphabetically sorted.
2 or to [New Contact] and press the Menu
Select button directly below Sel .
3 or to Name and press the Menu Select button directly below Edit .
The display shows Edit name and a blinking cursor appears.
4 Use the keypad to enter the name and press the
Menu Select button directly below Ok once you have entered the name.
To cancel this operation, press the Menu Select button directly below Cncl to return to the previous screen.
5 or to [Add Number] and press the Menu
Select button directly below Sel .
6 or to Number 1 and press the Menu Select button directly below Edit .
The display shows Edit Number 1 and a blinking cursor appears.
7 Use the keypad to enter the number and press the Menu Select button directly below Ok once you have entered the number.
To cancel this operation, press the Menu Select button directly below Cncl to return to the previous screen.
8 Perform one of the following actions per the information you need to add to current name:
• or to Type 1 and press the Menu Select button directly below Edit .
or to the required mode and press the
Menu Select button directly below Ok .
•
through
exisitng system IDs.
•
through
number.
9 Press the Menu Select button directly below Done once you have finished.
75
English
The display shows <Entry> Stored , confirming that the contact entry has been added.
The radio returns to the main Contacts screen.
Deleting a Contact Entry
1
or to Cnts and press the Menu Select button directly below Cnts .
The entries are alphabetically sorted.
2
or to the entry you want to delete and press the
Menu Select button directly below Optn .
3
or to Del and press the Menu Select button directly below Sel .
The display shows Delete <Entry> confirm?
.
4 Select the Menu Select button directly below Yes to delete the entry, or No to cancel and return to the main screen of Contacts.
The display shows <Entry> deleted and the radio returns to the main screen of Contacts.
Adding a Contact to a Call List
1
or to Cnts and press the Menu Select button directly below Cnts .
The entries are alphabetically sorted.
2 or to the entry you want to add and press the Menu Select button directly below Optn .
3 or to Add to CallLst and press the Menu
Select button directly below Sel .
4 Perform one of the following actions:
•
• or to the required Call List and press the
Menu Select button directly below Add to add to the Call List.
or to Cncl to cancel and return to the main screen of Contacts.
The display shows momentary Please wait before showing <Entry> added to Call List , confirming the addition of the contact to the list.
The radio returns to the main display of Contacts.
76
English
Removing a Contact from a Call List
1
or to Cnts and press the Menu Select button directly below Cnts .
The entries are alphabetically sorted.
2 or to the entry you want to delete and press the Menu Select button directly below Optn .
3 or to Rm frm CallLst and press the Menu
Select button directly below Sel .
The display shows Remove <Entry> frm Call List?
.
4 Press the Menu Select button directly below Yes to remove the entry from the Call List, or No to cancel and return to the main display of Contacts.
The display shows momentary Please wait before showing <Entry> removed from Call List , confirming the removal of the contact from the list.
The radio returns to the main display of Contacts.
Methods of Contact Editing in a Call List
Editing an Entry Alias
1
or to Cnts and press the Menu Select button directly below Cnts .
The entries are alphabetically sorted.
2 or to the entry you want to edit and press the Menu Select button directly below Optn .
3 or to Edit and press the Menu Select button directly below Sel .
4 or to the entry alias you wish to change and press the Menu Select button directly below Edit .
A blinking cursor appears.
5 Use the keypad to edit the name and press the
Menu Select button directly below Ok once you have finished.
The display returns to the Edit Contact screen.
6 Press the Menu Select button directly below Done to save your changes and return to the main screen of Contacts.
English
77
78
English
Editing as Entry ID
1
or to Cnts and press the Menu Select button directly below Cnts .
The entries are alphabetically sorted.
2 or to the entry you want to edit and press the Menu Select button directly below Optn .
3 or to Edit and press the Menu Select button directly below Sel .
4 or to the entry ID you wish to change and press the Menu Select button directly below Edit .
A blinking cursor appears.
5 Use the keypad to edit the number and press the
Menu Select button directly below Ok once you have finished.
The display returns to the Edit Contact screen.
6 Press the Menu Select button directly below Done to save your changes and return to the main screen of Contacts.
Editing a Call Type
1
or to Cnts and press the Menu Select button directly below Cnts .
The entries are alphabetically sorted.
2 or to the entry you want to edit and press the Menu Select button directly below Optn .
3 or to Edit and press the Menu Select button directly below Sel .
4 or to Type and press the Menu Select button directly below Edit .
5 or to choose from the list of call types given and press the Menu Select button directly below
Ok .
The display returns to the Edit Contact screen.
6 Press the Menu Select button directly below Done to save your changes and return to the main screen of Contacts.
Viewing Details of a Contact
1
or to Cnts and press the Menu Select button directly below Cnts .
The entries are alphabetically sorted.
2 or to the entry you want to view and press the Menu Select button directly below Optn .
3 or to View and press the Menu Select button directly below Sel .
The display shows all the numbers associated with the entry.
Scan Lists
Scan lists are created and assigned to individual channels/ groups. Your radio scans for voice activity by cycling through the channel/group sequence specified in the scan list for the current channel/ group.
Your radio supports different types of Scan Lists:
• Trunking Priority Monitor Scan List
• Conventional Scan List
• Talkgroup Scan List
Please refer to a qualified radio technician for the maximum number of Scan Lists can be programmed in your radio. These lists must be preprogrammed by a qualified radio technician.
Viewing a Scan List
1
or to ScnL and press the Menu Select button directly below ScnL .
2 or to view the members on the list.
3 Press to exit the current display and return to the Home screen.
Editing the Scan List
This feature lets you change scan list members and priorities.
1 Perform one of the following actions:
•
• Long press the preprogrammed Scan List
Programming button (side button).
• Move the preprogrammed Scan List
Programming switch to programming position.
or to ScnL then press the Menu Select button directly below ScnL .
79
English
80
English
The display shows the lists that can be changed.
2 or to the entry you want to edit.
3 Perform one of the following actions:
• Press the Menu Select button directly below
Sel to add and/or change the priority of the currently displayed channel in the scan list.
• Press the Menu Select button directly below
Del to delete the currently displayed channel from the scan list.
• Press the Menu Select button directly below
Rcl to view the next member of the scan list.
4 Perform one of the following actions to select another channel that needs to be added or deleted
then repeat step 3 . Otherwise, proceed to the next
step.
• or to the desired channel.
• Use the keypad to enter the desired channel name.
• Use the 16-Position Select knob to select the channel.
5 Perform one of the following actions:
• Move the Scan List Programming switch out of programming position.
•
Press to exit scan list programming and return to the Home screen.
See Viewing and Changing the Priority Status on
page 81 for more information on how to add and/or change the priority of the currently displayed channel in the scan list.
Changing the Scan List Status
1 Perform one of the following actions:
• Long press the preprogrammed Scan List
Programming button (side button).
• Move the preprogrammed Scan List
Programming switch to programming position.
The display shows the programming mode icon and the first list member.
2 or to the member you want to edit.
3 Perform one of the following actions:
• Press the Select button once to add the currently displayed channel to the scan list.
• Press the Select button one or more times to change the scan list status icon of the currently displayed channel.
4 Perform one of the following actions:
• or to select more list members whose scan status you want to change.
• Use the keypad to go directly to that scan list member.
• Use the 16-Position Select knob to select another scan list member.
5 Move the Scan List Programming switch out of programming position.
Viewing and Changing the Priority Status
Perform one of the following actions:
• Press the Menu Select button directly below
Sel one or more times to change the priority status of the current displayed channel.
• Press the Select button one or more times to toggle between different status of the Scan List status icon of the current displayed channel.
The radio shows one of following priority status icons and scenarios:
• A Scan icon indicates that the current channel is in the scan list as a non-priority channel. The
LED lights up solid green.
• A Priority-Two Channel Scan icon indicates that the current channel is in the scan list as the Priority-Two channel. The LED blinks green.
• A Priority-One Channel Scan icon indicates that the current channel is in the scan list as the Priority-One channel. The LED rapidly blinks green. You hear all traffic on the Priority-
One channel, regardless of traffic on nonpriority channels.
• No icon indicates that the current channel is deleted from the scan list.
Scan
This feature allows you to monitor traffic on different channels by scanning a preprogrammed list of channels.
English
81
82
Turning Scan On or Off
Perform one of the following actions:
• Press the preprogrammed Scan button to toggle Scan On or Scan Off to initiate or stop scan.
•
• Turn the preprogrammed Scan switch to the
Scan on or Scan off position to initiate or stop scan.
or to Scan and press the Menu Select button directly below Scan .
If the scan is enabled, the display shows Scan on and the scan status icon.
If the scan is disabled, the display shows Scan Off .
Only)
The radio returns to the Home screen.
Making a Dynamic Priority Change (Conventional Scan
While the radio is scanning, the dynamic priority change feature allows you to temporarily change any channel in a scan list (except for the Priority-One channel) to the Priority-Two channel.
This change remains in effect until scan is turned off.
Scan then reverts to the preprogrammed (original) setting.
Making a Dynamic Priority Change via the preprogrammed Dynamic Priority button: a) When the radio locks onto the channel designated as the new Priority-Two channel, press the preprogrammed Dynamic Priority button.
The radio continues scanning the remaining channels in the list.
Deleting a Nuisance Channel
If a channel continually generates unwanted calls or noise (termed a “nuisance” channel), you can temporarily remove the unwanted channel from the scan list.
This capability does not apply to priority channels or the designated transmit channel.
When the radio is locked onto the channel to be deleted, perform one of the following actions:
• Press the preprogrammed Nuisance Delete button.
English
•
or to Nuis and press the Menu Select button directly below Nuis .
The radio continues scanning the remaining channels in the list.
Restoring a Nuisance Channel
To restore the deleted nuisance channel, perform one of the following actions:
• Stop and restart a scan.
• Mode change to another channel and back to the original channel.
• Turn off the radio and then turn it on again.
Nuisance mode delete can be disabled by the system administrator.
Depending on how your radio is programmed, when you make an Enhanced Private Call, the radio either automatically sends a call alert page if there is no answer after the maximum ring time, or when you press the PTT button.
Note:
This feature must be preprogrammed by a qualified radio technician.
Receiving a Call Alert Page
When you receive a Call Alert page, you hear four repeating alert tones and the LED blinks green. The call received icons blinks and the display shows Page received .
Press any button to clear the Call Alert page.
Call Alert Paging
This feature allows your radio to work like a pager.
Even if other users are away from their radios, or if they are unable to hear their radios, you can send them an individual Call Alert page. You can also verify if a radio is active on the system.
on page 62 or
Private Call (Trunking Only) on page 62 for more
information on returning the call.
Sending a Call Alert Page
The following methods are options on how to send a call alert page. The result of all the methods is the same. You can use the options interchangeably
English
83
84
English depending on your preference and the programmed functions.
Note:
If the feature inactivity timer is enabled, your radio automatically exits the feature when your radio is left idle long enough for the time to expire. You hear the Menu Inactive Exit Tone upon feature exit.
• Sending a call alert page via the preprogrammed
Quick Access (One-Touch) Call Alert Paging button: a) Press the preprogrammed Quick Access
(One-Touch) Call Alert Paging button to send a page to the preprogrammed ID.
The display shows Paging...<Number> .
If the call alert page is sent successfully, you hear a tone and the display shows Ack received .
The radio returns to the Home screen.
If the call alert page is not acknowledged, you hear a low tone and the display shows No acknowledge . Press the Menu Select button directly below Ok to return to the main screen for Contacts.
• Sending a call alert page via the radio menu Page : a) or to
Page .
b) Press the Menu Select button directly below
Page .
c) Press the Menu Select button directly below
Cnts to view the required ID, or to the required ID, or use the keypad to enter the required ID.
d) Press the PTT button to send the page.
The display shows Paging...<Number> .
If the call alert page is sent successfully, you hear a tone and the display shows Ack received .
The radio returns to the Home screen.
If the call alert page is not acknowledged, you hear a low tone and the display shows No acknowledge . Press the Menu Select button directly below Ok to return to the main screen of Contacts.
• Sending a call alert page via the radio menu Call : a) or to
Call .
b) Press the Menu Select button directly below
Call .
c) or to select the alias or ID, and press the
PTT button to initiate the call.
If the target radio does not respond after a preprogrammed period of time, the display shows Send page?
.
d) To send the call alert page, press the Menu
Select button directly below Yes . To exit the screen without sending the call alert page, press the Menu Select button directly below
No .
The display shows Paging...<Alias> .
If the call alert page is sent successfully, you hear a tone and the display shows Ack received .
The radio returns to the Home screen.
If the call alert page is not acknowledged, you hear a low tone and the display shows No acknowledge . Press the Menu Select button directly below Ok to return to the main screen of Contacts.
Quick Call II (ASTRO P25 Digital Trunking and
Conventional)
This feature allows the user to broadcast a series of distinct, recognizable tones before a voice transmission from the dispatcher or a radio.
The broadcasting dispatcher or radio user can select this alert tone transmission to be sent to an individual
Talkgroup or over the entire system. Specific tone or series of tones are pre-programmed into the radios to allow the dispatcher or supervisor to select a list of tones to broadcast before they make their voice transmission. Each tone is distinctive to indicate different situation or different broadcaster. The transmitting radio also plays back the tones for the broadcaster to listen.
Note:
The receiving radios must be configured with the Quick Call II tone in order for the radio to sound the selected tone and also to sound a preconfigured alert tone after the selected tone has sound.
English
85
Initiating a Quick Call II Transmission
The broadcasting or transmitting radio must be preprogrammed to see the tone in the Quick Call II tone list. The receiving radio must also be preprogrammed to decode the tone to broadcast.
1
or to QCII , and press the Menu Select button directly below QCII .
2 or to select the tone to broadcast.
3 Press the PTT to broadcast the selected tone, or press and hold the PTT to broadcast the selected tone and transmit with your vocal transmission.
You hear the radio sounds the selected tone. You can begin your call after the tone ends.
4 Release PTT to listen.
86
Emergency Operation
The Emergency feature is used to indicate a critical situation.
If the Top (Orange) button is preprogrammed to send an emergency signal, this signal overrides any other communication over the selected channel.
English
Your radio supports the following Emergency modes:
• Emergency Alarm
• Emergency Call (Trunking Only)
• Emergency Alarm with Emergency Call
• Silent Emergency Alarm
Check with your dealer or system administrator for more information on the programming of this feature.
Each channel can only assigned one of the
Emergency modes above. The radio responds differently when pressing the preprogrammed
Emergency button in each channel.
Note:
To exit emergency at any time, press and hold the preprogrammed Emergency button for about a second. This timer is programmable from 0 – 6250 milliseconds by a qualified technician.
The radio operates in the normal dispatch manner while in Emergency Call, except if enabled, it returns to one of the following:
Tactical/Non-
Revert
The radio sends emergency alarm and/or make emergency call on
Non-Tactical/
Revert for
Conventional system
Non-Tactical/
Revert for
Trunking system the current selected channel.
The radio reverts to the preprogrammed emergency channel to send alarm and/or make emergency call.
The radio reverts to the preprogrammed emergency talkgroup to send alarm and/or make emergency call.
Man Down is an alternate way to activate the
Emergency feature on the condition the Emergency must be set up for this feature to operate.
on page 94 for details.
Sending an Emergency Alarm
This feature allows you to send a data transmission, which identifies the radio sending the emergency, to the dispatcher.
Note:
The default timer of Emergency button press to activate Emergency is 50 milliseconds. This timer is programmable from 50 – 6200 milliseconds by a qualified technician.
Press the preprogrammed Emergency button.
One of the following scenarios occurs:
• The display shows Emergency on the current zone and channel. You hear a short mediumpitched tone and the LED blinks red momentarily.
• The radio sounds a short low-pitched tone to indicate that the selected channel does not support emergency and rejects to launch emergency mode.
When you receive the dispatcher’s acknowledgment, the display shows Ack received . Four tones sound, the alarm ends, and the radio exits the Emergency Alarm mode.
If no acknowledgement is received, the display shows
No acknowledge . The alarm ends when the timer expires and the radio exits the Emergency Alarm mode.
English
87
Sending an Emergency Call (Trunking Only)
This feature gives your radio priority access to a talkgroup.
1 Press the preprogrammed Emergency button.
One of the following scenarios occurs:
• The display shows Emergency on the current zone and channel. You hear a short mediumpitched tone and the LED blinks red momentarily.
• You hear the radio sounds a short low-pitched tone to indicate the selected channel does not support emergency and rejects to launch emergency mode.
2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
3 Press and hold the PTT button. Speak clearly into the microphone.
4 Release the PTT button to end the transmission and wait for a response from the dispatcher.
5 To exit Emergency Call, press and hold the preprogrammed Emergency button for about a second.
Sending an Emergency Alarm with Emergency Call
This feature gives your radio priority access on a channel for conventional system, and to a talkgroup for trunking system.
1 Press the preprogrammed Emergency button.
If successful, the display shows Emergency on the current zone and channel. You hear a short, medium-pitched tone and the LED blinks red momentarily.
The radio exits Emergency Alarm and enters the
Emergency Call state when one of the following scenarios occur:
• You receive the dispatcher acknowledgment.
The display shows Ack received .
• You receive no acknowledgement. The display shows No acknowledge .
• You press the PTT button while in the
Emergency Alarm mode.
88
English
If unsuccessful, you hear the radio sounds a short low-pitched tone to indicate the selected channel does not support emergency and rejects to launch emergency mode.
2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
3 Press and hold the PTT button. Speak clearly into the microphone.
4 Release the PTT button to end the transmission and wait for a response from the dispatcher.
5 To exit Emergency Call, press and hold the preprogrammed Emergency button for about a second.
Turning off the radio also cancels the emergency state.
Sending a Silent Emergency Alarm
This feature allows you to send an Emergency Alarm to the system without triggering any audio or visual indicators.
1 Press the preprogrammed Emergency button.
The display shows no changes, the LED does not light up, and you hear no tones. The silent emergency state continues until you perform the next step.
2 Perform one of the following actions:
• You press and hold the preprogrammed
Emergency button for about a second to exit the Silent Emergency Alarm mode.
• Press and release the PTT button to exit the
Silent Emergency Alarm mode and enter regular dispatch or Emergency Call mode.
Change of Channels during Emergency
For ALL Emergency transmissions, when changing channels:
• If the new channel is also preprogrammed for
Emergency, you can change channels while in
Emergency operation. The emergency alarm or call continues on the new channel.
• If the new channel is not preprogrammed for
Emergency, the display shows No emergency , and you hear an invalid tone until you exit the
Emergency state or change to a channel preprogrammed for Emergency.
89
English
90
Emergency Keep-Alive Feature
This feature, when enabled, prevents the radio from being turned off via the On/Off Control Knob when the radio is in the Emergency state.
Note:
The radio only exits the Emergency state using one of the ways mentioned in the previous sections.
See Sending an Emergency Alarm on page
87,
Sending an Emergency Call (Trunking
on page 88,
Alarm with Emergency Call on page 88, or
Sending a Silent Emergency Alarm
on page
89.
Emergency Find Me
The Emergency Find Me (EFM) feature is an additional emergency feature providing information to the nearby radios, utilizing the Bluetooth Low Energy
(BT-LE) transmission from a radio. In an emergency situation, when the user press the pre-programmed
Emergency button, there will be periodic Emergency
Find Me beacon transmitted from the radio along with the other existing emergency activities. The radios which are near to the transmitting radio and capable
English of receiving BT-LE signals would receive the beacon transmission. The range of EFM beacon depends on the environment in which the radios are located.
Check with your dealer or system administrator for more information on the programming of this feature.
Sending and Receiving Emergency Find Me
Beacon
1 Press the pre-programmed Emergency button to transmit the EFM beacon.
The receiving radio displays Beacon RX and the transmitting radio Contact ID or alias on the radio display. In the case of multiple radios transmitting at one time, the receiving radio displays Multiple
Beacon RX .
2 Press the menu Bcon . The receiving radio displays the transmitting radios Contact ID and one of the following RSSI values based on the signal strength received:
• RSSI-Excellent
• RSSI-Good
• RSSI-Fair
• RSSI-Poor
Note:
RSSI-Poor will be shown if the distance between transmit radio and receive radios are more than 8 to 10 meters in an open environment.
Fireground (Conventional Only)
The portable Fireground Communications System is designed for deployment at an incident scene. It consists of five central components:
• Your APX portable radios
• Incident Management Software
• Command Terminal
• Radio Frequency (RF) Modem
• DVRS (Optional)
These components provide on-scene and inbuilding radio coverage, and enhanced personnel accountability and monitoring.
The radio helps to indicate your presence on the scene if it is in the range of the Incident Commander command terminal.
Each Fireground Communication System radio automatically reports your radio ID on the commander mobile command terminal. Your name, riding position and sector are all can be configured to be seen at the
Commander’s command terminal.
If you have a critical situation, you can press the
Emergency button which activates an alarm on the
Incident Management Software at the command terminal.
The Fireground signals transmission is always exchanging data between your radio and the RF
Modem and command terminal. The status of your radio includes:
• Powering up or down the radio
• Automatic response to Polling
• Response to Evacuation commands
• Pressing the PTT button to make voice transmission
• Sending an Emergency Alarm and Call
Entering Fireground Zone Channel
1 Upon powering up, perform one of the following actions:
91
English
92
English
• If the Fireground Zone Channel is set as default, you hear gurgle tone and the home screen. You are in Fireground zone channel.
• If the Fireground Zone Channel is set as default, but you hear a short, low-pitched tone, the display shows Reg failed to indicate that the command terminal does not respond to
Fireground Zone Channel. Get a qualified technician for assistance.
• If your home channel is not Fireground Zone
Channel, toggle or change the radio zone channel to Fireground Zone Channel.
2 Listen for a transmission. Adjust the Volume
Control Knob if necessary.
3 Perform one of the following actions:
• Press and hold the preprogrammed Volume
Set button to hear the volume set tone. Adjust the Volume Control Knob if necessary.
Release the Volume Set button.
• At the desired Fireground zone and channel, press the preprogrammed Monitor button and listen for activity. Adjust the Volume Control
Knob if necessary.
• If your radio is working in Fireground Zone
Channel, proceed to next step.
4 Press and hold the PTT button to transmit. The
LED lights up solid red while transmitting. Talk into the microphone clearly if needed.
5 Release the PTT button to receive.
You hear a Transmit End Tone.
Responding to Evacuation Indicator
When Incident Commander triggers Evacuation signal from his command terminal, the RF Modem updates everyone in the Fireground Communication System with the order to evacuate the incident site.
Your radio sounds the Evacuation Tone at the profile maximum alert tone volume level. The display shows
EVACUATE .
Perform one of the following actions:
• Move the Volume Control Knob to adjust the volume of the Evacuation Tone from full volume.
• Perform any action on the radio other than volume adjustments to cancel the evacuation indications and update the command terminal.
• If preprogrammed with Manual
Acknowledgement of Evacuation Command, pressing the PTT button shall cancel the indications and acknowledge the command terminal.
Tactical Public Safety (TPS) (Conventional
Only)
TPS enabled the user of a group to identify a transmission starts and ends clearly by displaying the caller name or ID on the radio display.
Using TPS Normal Transmission
At TPS Zone Channel, perform one of the following actions:
• Press PTT button to transmit. Talk clearly into the microphone. Release PTT button to listen.
• Receive and listen to call, the radio displays the caller’s name or ID.
Using TPS Emergency Transmission
The following are two important alert tones designed for this feature.
Emergency
Beacon
Emergency
Call De-Key
Sidetone
During Emergency if the TPS radio user pushes the Emergency button, the radio sounds a Beacon at the maximum volume of the radio at radio’s internal speaker and it is not adjustable. This beacon goes to silent when user presses the PTT button for voice transmission.
The radio sounds an alert tone to remind radio user that the
Emergency Mode is still active after user releases the PTT button for an
Emergency call transmission. The volume of loudness depends on the maximum tone at your radio profile.
1 Press the Emergency button to enter Emergency
Mode.
You hear Emergency Beacon.
2 Press PTT button to make Emergency Call.
3 Release to listen.
You hear Emergency Call De-Key Sidetone. After a short pause, you hear Emergency Beacon.
English
93
94
Man Down
Man Down condition is determined based upon the radio tilt angle or a combination of radio tilt angle and the lack of radio motion.
Man Down feature is an alternate way to activate the
Emergency feature if Emergency has been programmed in your radio.
Note:
This feature could be preprogrammed for all channels that support Emergency feature or could be preprogrammed specifically to a zone and channel which has Emergency feature.
Consult your agent or qualified technician for more details.
Your radio automatically activates Emergency Alarm or Call when the radio achieves or passes a tilt angle threshold or a combination of the angle threshold and radio motion below the motion sensitivity level, depending upon how the radio is programmed. The radio must stay in this condition for a preprogrammed
English
4 Long press Emergency button to exit Emergency mode and cancel Emergency Beacon.
amount of time before the Emergency Alarm or Call is activated.
Note:
It is recommended that an Emergency button is preprogrammed in order to allow the user to exit the emergency condition.
The Man Down feature provides a Clear function to the user. After a Man Down condition has been detected, the user can press a preprogrammed Clear button or preprogrammed Menu Select button to cancel the Man Down condition. The radio remains in the Man Down state without triggering an emergency condition until the radio is moved out of the Man
Down state, at which point Man Down functionality resumes.
The Man Down feature has three phases:
1 The radio senses the Man Down condition and
Pre-Alert Timer is initiated.
2 Man Down condition continues for the time duration defined in the Pre-Alert Timer field. At the end of this time, the radio alerts the user on the
Man Down status with an audible alert tone and
Man-Down text on the screen. The Post-Alert
Timer also initiates at this point.
3 Man Down condition continues for the time duration defined in the Post-Alert Timer field. Once the timer expires, the Emergency alarm is transmitted. The Man Down Clear function is used in this phase to cancel the Man Down condition.
The following scenarios affect the timers:
• Pressing the PTT button suspends the Man Down timers; releasing the PTT button re-initiates the
Pre-Alert Timer.
• Pressing other buttons on the radio does not impact these timers.
• Repositioning the radio exits the Man Down feature, which stops and resets the timers.
• Pressing a preprogrammed Clear button or pressing a Menu Select button preprogrammed for Clear stops and resets the timers. The timers do not restart until the radio is repositioned.
Note:
Emergency must be set up for this feature to operate. For details on operating the
Emergency alerts, please see Emergency
on page 86.
If the radio is preprogrammed to horizontal only, it must be worn in a vertical position otherwise the Man Down alert may be inadvertently triggered.
When the radio is programmed with Man
Down feature, special care is required when charging the radio with a wall mounted charger. See
Radio on page 181 for details.
Pre-Alert Timer
This timer sets the amount of time that a Man Down condition must be present before the radio-user is warned of the Man Down condition.
When the radio detects that it has returned to the vertical position or when the radio detects motion, the
Pre-Alert timer stops and is reset.
The Pre-Alert timer reinitiates when the radio detects it is in the horizontal position or motionless again.
Post-Alert Timer
This timer sets the amount of time the radio needs to remain in the Man Down condition before the
Emergency alarm is transmitted. When the Post-Alert
Timer is initiated, the radio alerts the user with an audible tone and displays the “ Man-Down ” text.
95
English
96
on page 97 to exit
Man Down feature.
Radio Alerts When Man Down Feature is Triggered
The Man Down alert tone volume is directly related to the radio speaker volume. Ensure that the radio speaker volume is loud enough so that the user does not miss the Post-Alert tone.
Note:
If the radio is programmed with Silent
Emergency, the radio inhibits the alert tone and visual alert associated with the emergency feature.
If the radio is programmed in Surveillance
Mode, the radio inhibits all tones and lights on the radio including the Man Down tones.
Triggering Emergency
When the user does not clear the Man Down condition and the Post-Alert Timer comes to an end,
Emergency Alarm or call is triggered. The radio sends emergency message to units within the same
Talkgroup. The radio also sends ID number and GPS coordinates to dispatcher if these features are enabled. User can exit Emergency following the
Emergency procedure. See Emergency Operation
on page 86 for details.
Note:
At this point the Man Down features is complete. Use normal Emergency procedures to cancel Emergency transmissions.
Radio Alerts When Man Down Enhanced is Triggered
Note:
This feature is to be preprogrammed specifically to a zone and channel which supports Emergency feature.
The volume and repetition duration of Man
Down Enhanced alert tone could be customized and preprogrammed to suite the required situation.
Consult your agent or qualified technician for more details.
When the radio initiates Man Down Enhanced, you hear the Critical Man Down Continuous alert tone from the radio speaker. The volume of this tone is set to the louder of the preprogrammed minimum level or the current radio speaker level. This acts as a beacon to find the radio.
English
Note:
If the radio is programmed with Silent
Emergency, the radio inhibits the alert tone and visual alert associated with the emergency feature.
If the radio is programmed in Surveillance
Mode, the alert tone can be heard from the radio speaker.
Once the alert tone is active, changing to another channel with different setup triggers a different response from the radio as described next.
• The alert tone is inhibited when you change to a channel without Emergency feature.
• The alert tone is inhibited when you change to a channel with Emergency but no Man Down feature.
• The current alert tone is inhibited and is replaced with a different alert tone when you change to a channel with Emergency and different Man Down configuration.
• The alert tone continues when you change to a channel with Emergency and similar Man Down configuration.
Exiting Man Down Feature
If you are not in a real Man Down situation, you should exit the Man Down feature and prevent emergency from going off with the following operation.
Perform one of the following actions:
• Repositioning the radio or shaking the radio
(when motion sensitivity is enabled).
• Press the preprogrammed Man Down Clear button to exit.
• Press the Menu Select button below Clr to exit.
Re-Initiating Man Down
After exiting the Emergency Operation when the radio is still in Man Down condition (tilted achieving threshold angle or motionless), user must first exit
Man Down condition to then reinitiate the Man Down feature.
Return the radio to the vertical position or shake the radio (when motion sensitivity is enabled).
English
97
98
Testing the Man Down Feature
Enable the Emergency feature with Silent Alarm disabled, but not in Surveillance Mode before running this test on the radio.
1 Turn the radio on and place in the vertical position, for at least 5 seconds.
2 Lay the radio down in the horizontal position.
3 Wait for alert tone.
One of the following scenarios occurs:
• The radio alerts with audible tone and displays
Man-Down .
• If no tone is heard, make sure that the Man Down feature is enabled on your radio. If Man Down feature was not enabled, please enable it and
• If the Man Down feature is enabled and no tone is heard, send the radio to a qualified technician.
Automatic Registration Service (ARS)
This feature provides an automated data application registration for the radio. When you turn on the radio, the device automatically registers with the server.
Data applications within the fixed network can determine the presence of a device on the system and send data to the device. For example: Text
Messaging Service (TMS).
The Automatic Registration Service for the radio consists of two (2) modes:
• ARS Server Mode (default mode)
• ARS Non-Server Mode
Note:
The default ARS mode can be changed by a qualified radio technician using the radio’s programming software.
Selecting or Changing the ARS Mode
The following methods are options on how to select or change the ARS Mode. The result of all the methods is the same. You can use the options interchangeably depending on your preference and the programmed functions.
English
• Selecting or Changing the ARS mode via 16-
Position Select knob: a) Once the zone you want is displayed, turn the preprogrammed 16-Position Select knob to the desired mode.
• Selecting or Changing the ARS mode via the radio menu: a) or to
Chan .
b) Press the Menu Select button directly below
Chan .
The display shows the current channel name.
c) or to the required channel or mode.
One of the following scenarios occur:
• In ARS Server Mode, the display shows the zone and ARS server channel.
• In ARS Non-Server Mode, the display shows the zone and ARS non-server channel.
• If the channel or mode selected is unprogrammed, the display shows
Unprogrammed . Repeat this step.
d) Press Sel to confirm the displayed channel.
User Login Feature
This feature allows you as the user to be associated with the radio. With this association, every data application (Example: Text Messaging Service) takes on a friendly username.
You can still send text messages without logging in as a user. The user login feature only enables the recipient of your message to identify you as the sender by assigning a username to your message.
Note:
A predefined username that is set more than the maximum allowed characters is an invalid name.
Logging In as a User
1 Perform one of the following actions:
•
• Press the preprogrammed User Login button.
or to User and press the Menu Select button directly below User .
The display shows the User Login screen.
2 Perform one of the following actions:
English
99
100
English
• or to [ID Entry] and press the Menu
Select button directly below Edit to enter ID. A blinking cursor appears on the screen. Use the
keypad to type or edit a user name. Press the
Menu Select button directly below Ok to submit.
• or to scroll through the list of predefined user names. Press the Menu Select button directly below Sel to select the predefined user name.
• Press and hold or to scroll through the list of predefined user names at a fast scroll rate. Press the Menu Select button directly below Sel to select the predefined user name.
If the ID is invalid, the display shows momentary
Invalid ID .
3 Enter your Personal Identification Number (PIN) number.
4 Press the Menu Select button directly below Logn .
One of the following scenarios occurs:
• In ARS Server Mode, the display shows the
User Login Indicator icon, the ID, and In progress , with Cncl .
• In ARS Non-Server Mode, the display shows the User Login Indicator icon, the ID, and
Logged in , with Logt and Exit .
• In non-ARS enabled mode, the display shows
Offline , with Logt and Exit .
One of the following scenarios occurs:
• If the user name is invalid, login fails and the user login failure indicator (IP indicator) icon blinks. The display also shows momentary Login failed .
• If the PIN is invalid, login fails and the user login failure indicator (IP indicator) icon blinks. The display also shows momentary Login failed .
• Wait for the logged in confirmation screen. If the login process is successful, the display shows the successful user login indicator (IP indicator) icon and Logged in , with Logt and Exit .
Note:
To cancel the login process and return to the initial user login screen, press the Menu
Select button directly below Cncl .
Logging Out
When you have logged in or you are using Offline mode, you can log out.
Note:
Private data refers to all messages in the text messaging Inbox, Draft, and Sent folder. The next user is able to access the Inbox, Draft and Sent messages if private data is not deleted.
1 Press the Menu Select button directly below Logt .
One of the following scenarios will occur:
• The display shows Clear private data?
. Proceed to the next step.
• If the Delete Messages On Session End feature is enabled, the radio clears the private data and returns to User Login screen.
2 Perform one of the following actions:
• Select Yes to clear all your private data. The display shows momentary Private data cleared .
• Select No to keep your private data.
Text Messaging Service (TMS)
This features allows you to quickly send and receive messages and run database queries directly from your radios. The maximum length of characters for a text message is 200.
The types of text messages available:
• A new text message (free form message).
• A predefined message (quick text message).
• An edited quick text message.
• A query (ASTRO 25 Advanced Messaging
Solution).
Note:
Query is only supported within ASTRO 25
Advanced Messaging Solution. See Two-
on page 113 and
ASTRO 25 Advanced Messaging Solution on
page 112 for details.
The main menu consists of the following options:
• Inbox
• Compose
• Drafts
• Sent
Note:
See Status Icons on page 41 for more
information on the TMS icons and
101
English
102
on page 47 for more information on each menu option.
Accessing the Messaging Features
1 Perform one of the following actions:
• Press the Data Feature button or the preprogrammed TMS Feature button to access the TMS feature screen.
• Press and hold the Data Feature button or the preprogrammed TMS Feature button to access the Inbox.
• Follow the procedure described next to access this feature via the radio menu.
2
or to TMS .
3 Press the Menu Select button directly below TMS to access the TMS feature screen.
4 or to scroll through the main menu options.
Note:
The radio automatically exits the feature, if the feature inactivity timer is enabled, when the radio is left idle and the timer expires.
You will hear the Menu Inactive Exit Tone upon feature exit.
Press the Menu Select button directly below Back at any time to return to the previous screen.
Composing and Sending a New Text Message
During the uppercase and lowercase mode, multitapping the keys only scrolls through the letters. For example, A -> B -> C , a -> b -> c .
During the numeric mode, except for the keypad only enters the numeric digits.
, pressing
Subsequent presses of the same key inserts the same digit to the text message (no multi-tap).
1
or to TMS .
2 Press the Menu Select button directly below TMS to access the TMS feature screen.
3 Perform one of the following actions:
• or to Compose and press the Menu
Select button directly below Sel .
English
• Press the Menu Select button directly below
Exit to return to the Home screen.
4 or to Text Message and press the Menu
Select button directly below Sel to compose a new message.
A blinking cursor appears on the Compose screen.
5 Use the keypad to type or edit your message.
6 Press the Menu Select button directly below Optn once the message is composed.
7 or to Send Message and press the Menu
Select button directly below Sel .
8 Perform one of the following actions:
•
• or to scroll through the address list and highlight the required address.
or to [Other Recpnt] and press the Menu
Select button below Edit . When a blinking cursor appears in the Enter Address screen, use the keypad to type the address entry.
9 Press the Menu Select button directly below Send or press the PTT button to send the message.
The display shows the Send Message screen and
Sending msg .
If the message is sent, you hear a tone and the display shows Msg sent .
If the message is not sent, you hear a low tone, the display shows Send failed and returns to the main TMS screen.
Note:
You can append a priority status and/or a request reply to your message. See
Status and Request Reply of a New Text
information.
You can also select the Save to Drafts option to save your message in the Drafts folder to send it at a later time. See
Accessing the Drafts Folder on page 109
for more information.
Sending a Quick Text Message
Quick Text messages are messages that are predefined and usually consist of messages that are used most frequently.
103
English
104
English
Each Quick Text message or Query has a maximum length of 50 characters. You can select the required text from the Quick Text or Query.
1 Perform one of the following actions:
• To access this feature via a preprogrammed button, press the preprogrammed Quick Text button and proceed to Step 4.
• To access this feature via the menu, proceed to the next step.
2
or to TMS and press the Menu Select button directly below TMS to access the TMS feature screen.
3 Perform one of the following actions:
• or to Compose and press the Menu
Select button directly below Sel .
• Press the Menu Select button directly below
Exit to return to the Home screen.
4 or to Quick Text and press the Menu Select button directly below Sel for a predefined message.
5 or to scroll through the list of messages and press the Menu Select button directly below Sel to select the required message.
The message appears on the Compose screen, with a blinking cursor at the end of it. Use the keypad to edit the message, if required.
6 Press the Menu Select button directly below Optn .
7 or to Send Message and press the Menu
Select button directly below Sel .
8 Perform one of the following actions:
•
• or to scroll through the address list and highlight the required address.
or to [Other Recpnt] and press the Menu
Select button below Edit . When a blinking cursor appears on the Enter Address screen.
Use the keypad to type the address entry.
9 Press the Menu Select button directly below Send or press the PTT button to send the message.
The display shows the Send Message screen and
Sending msg .
If the message is sent, you hear a tone and the display shows Msg sent .
If the message is not sent, you hear a low tone, the display shows Send failed and returns to the main TMS screen.
Note:
You can append a priority status and/or a request reply to your message. See
Status and Request Reply of a New Text
information.
Priority Status and Request Reply of a New Text
Message
Before sending your message, you can append a priority status and/or a request reply to your message.
Appending a Priority Status to a Text Message
Ensure that an outgoing message is composed to allow you to perform this procedure. See
Composing and Sending a New Text Message on page 102 for
more information.
Note:
The Priority Status icon on a message does not imply that the message gets higher priority over the other messages when it is being transmitted. It is just an indication that can be embedded into a message to let the receiver know that the message is important.
1 Press the Menu Select button directly below Optn .
2 or to Mark Important and press the Menu
Select button directly below Sel to indicate the message is important.
The priority status icon appears beside the normal message icon on the label bar.
Removing a Priority Status from a Text Message
Ensure there is an outgoing message composed to allow you to perform this procedure. See
Composing and Sending a New Text Message on page 102 for
more information.
1 Press the Menu Select button directly below Optn .
2 or to Mark as Normal and press the Menu
Select button directly below Sel to remove the priority status from the message.
The display shows the normal message icon on the label bar.
105
English
106
English
Appending a Request Reply to a Text Message
Ensure that an outgoing message is composed to allow you to perform this procedure. See
Composing and Sending a New Text Message on page 102 for
more information
1 Press the Menu Select button directly below Optn .
2 or to Req Reply and press the Menu Select button directly below Sel to request for a reply.
The request reply icon appears beside the normal message icon on the label bar.
Removing a Request Reply from a Text Message
Ensure that an outgoing message is composed to allow you to perform this procedure. See
Composing and Sending a New Text Message on page 102 for
more information.
1 Press the Menu Select button directly below Optn .
2 or to No Req Reply and press the Menu
Select button directly below Sel to remove the priority status from the message.
The display shows the normal message icon on the label bar.
Appending a Priority Status and a Reply Request to a Text Message
Ensure that an outgoing message is composed to allow you to perform this procedure. See
Composing and Sending a New Text Message on page 102 for
more information.
1 Press the Menu Select button directly below Optn .
2 or to Mark Important and press the Menu
Select button directly below Sel to indicate the message is important.
3 or to Req Reply and press the Menu Select button directly below Sel to request for a reply.
The priority status and request reply icons appear beside the normal message icon on the label bar.
Removing a Priority Status and a Reply Request from a Text Message
Ensure that a outgoing message is composed to allow you to perform this procedure. See
Composing and Sending a New Text Message on page 102 for
more information.
1 Press the Menu Select button directly below Optn .
2 or to Mark Important and press the Menu
Select button directly below Sel to remove the priority status icon.
3 or to No Req Reply and press the Menu
Select button directly below Sel to remove the reply status icon.
The display shows the normal message icon on the label bar.
Receiving a Text Message
Note:
When you receive a message that is flagged with the “Request Reply” icon, you must manually respond to the sender that you have received the message. The system will not automatically send back a notification that the radio has received such message.
The following methods are options on how to receive a text message. The result of all the methods is the same. You can use the options interchangeably depending on your preference and the programmed functions.
• Receiving a text message via the Data Feature button or the TMS Feature button: a) When you receive a message, press and hold the preprogrammed Data Feature button or the
TMS Feature button to access the Inbox.
The display shows a list of aliases or IDs, with the sender of the latest received message on top.
• Receiving a text message via the radio menu: a) When the new message icon appears and the display shows momentary New msg , press the
Menu Select button directly below TMS to access the Inbox.
The display shows a list of aliases or IDs, with the sender of the latest received message on top.
Viewing a Text Message from the Inbox
The Inbox can hold up to thirty (30) messages.
Note:
or to read the message if the content fills more than one screen.
1 Perform one of the following actions:
107
English
108
English
•
• Press the preprogrammed Data Feature button or the TMS Feature button to access the TMS feature screen. or to Inbox and press the
Menu Select button below Sel .
• Press and hold the preprogrammed Data
Feature button or the TMS Feature button to access the Inbox.
or to TMS and press the Menu Select button directly below TMS to access the TMS feature screen. or to Inbox and press the
Menu Select button below Sel .
The display shows a list of aliases or IDs, with the sender of the latest received message on top.
2 or to the required aliases or ID and press the Menu Select button below Sel to view the message.
While on the view message screen, press the
Menu Select button directly below Optn , Del , or
Back to access the option.
• Select Optn to configure the message settings.
• Select Del to delete the message.
• Select Back to return to the previous screen.
Note:
The icon at the top right corner of the screen indicates the status of the message.
See
Indicators on page 45 for more information.
Replying to a Received Text Message
Note:
The original date and time stamp, address and message content is automatically appended to the reply message.
1 or to the required aliases or ID and press the Menu Select button below Sel to view the message.
2 Press the Menu Select button directly below Rply to reply to a message.
3 Perform one of the following actions:
•
• or to Text Message and press the Menu
Select button directly below Sel .
or to Quick Text and press the Menu
Select button directly below Sel for a predefined message.
• or to scroll through the list of messages and press the Menu Select button directly below Sel to select the required message.
One of the following scenarios occurs:
• A blinking cursor appears on the Compose screen.
• The predefined message appears on the
Compose screen, with a blinking cursor at the end of it.
4 Use the keypad to type or edit your message.
5 Press the Menu Select button directly below Optn once you have completed the message.
6 or to Send Message and press the Menu
Select button directly below Sel to send the message.
The display shows the Send Message screen and
Sending msg .
Note:
Press the Menu Select button directly below
Back at any time to return to the previous screen.
You can append a priority status and/or a
request reply to your message. See Priority
Status and Request Reply of a New Text
on page 105 for more information.
Accessing the Drafts Folder
This folder stores the messages that were saved previously. The Drafts folder can hold up to 10 messages. The oldest draft in the folder is deleted when the 11th message comes in.
1
or to TMS .
2 Press the Menu Select button directly below TMS to access the TMS feature screen.
3 or to Drafts and press the Menu Select button below Sel .
The display shows a list of drafts, with the latest text message drafted on top.
4 or to the required text message and press the Menu Select button below Sel to view the message.
Press the Menu Select button directly below Edit ,
Del , or Back to access the option.
109
English
110
English
• Select Edit to edit the message before sending it.
• Select Del to delete the message.
• Select Back to return to the previous screen.
Sent Text Messages
Once a message is sent to another radio, it is saved in the Sent folder. The most recent sent text message is always added to the top of the Sent list.
The Sent folder is capable of storing a maximum of ten (10) last sent messages. When the folder is full, the oldest message in the folder is deleted when the
11th message comes in.
Viewing a Sent Text Message
1 Perform one of the following actions:
•
• Press the preprogrammed Data Feature button or the TMS Feature button to access the TMS feature screen.
or to TMS and press the Menu Select button directly below TMS to access the TMS feature screen.
2 or to Sent and press the Menu Select button below Sel .
The display shows a list of aliases or IDs, with the recipient of latest sent message on top.
3 or to the required aliases or ID and press the Menu Select button below Sel to view the message.
While on the view message screen, press the
Menu Select button directly below Optn , Del or
Back to access the option.
• Select Optn to configure the message settings.
• Select Del to delete the message.
• Select Back to return to the previous screen.
Note:
The icon at the top right corner of the screen indicates the status of the message.
See
Indicators on page 45 for more information.
Sending a Sent Text Message
1 Press the Menu Select button directly below Optn while viewing the message.
2 or to Send Message and press the Menu
Select button directly below Sel .
3 Perform one of the following actions:
•
• or to scroll through the address list and highlight the required address.
or to [Other Recpnt] and press the Menu
Select button below Edit . When a blinking cursor appears in the Enter Address screen, use the keypad to type the address entry.
4 Press the Menu Select button below Send or the
PTT button to send the message.
The display shows the Send Message screen and
Sending msg .
Note:
Press the Menu Select button directly below Back at any time to return to the previous screen.
You can append a priority status and/or a request reply to your message. See
Status and Request Reply of a New Text
information.
Deleting a Text Message
1 From the Inbox, Draft, or Sent screen, or to scroll through the messages.
2 Press the Menu Select button directly below Del to delete the current message.
Deleting All Text Messages
1 Perform one of the following actions:
•
• Press the Data Feature button or the preprogrammed TMS Feature button to access the Messaging feature screen.
or to TMS and press the Menu Select button directly below TMS to access the TMS feature screen.
2 or to Inbox or Sent then press the Menu
Select button below Clr to select all messages in the selected folder.
The display shows Del All?
.
3 Perform one of the following actions:
111
English
• Press the Menu Select button directly below
Yes to delete all the messages in the selected folder.
• Press the Menu Select button directly below
No to return to the main TMS feature screen.
112
ASTRO 25 Advanced Messaging Solution
The ASTRO 25 Advanced Messaging Solution allows you to quickly send and receive messages and run database queries directly from your data-enabled
Motorola two-way radios. Federal mandate requires
Two-Factor Authentication when querying Federal and State databases. With this advance messaging solution you have the ability enable Two-Factor
Authentication.
With Query and Two-Factor Authentication, you can use a secure system logon to initiate and receive key information on people, vehicles and properties when doing the regular security patrol. You can access to local or external databases such as the National
Crime Information Center (NCIC), for "Hot Hits" on priors and warrants. Query and Two-Factor
Authentication has Criminal Justice Information
Services (CJIS) security compliance for queries.
With this Advanced Messaging Solution, ARS functionality splits between two protocols:
• ARS for Device Registration
• New User Authentication for User Login
TMS functionality splits between two protocols:
• TMS for messaging
• New Service Advertisement for service availabilities
The radio with Two-Factor capabilities are backward compatible with the existing device registration system and TMS servers.
System Setup for ASTRO Advanced Messaging
Solution
Your user name, unit ID and password all need to be provisioned in PremierOne ™ . Your user account in
PremierOne needs to be linked to an RSA account specifying a token to be used with the Two-Factor passcode.
The radios caches the user name, unit ID and or
Single Factor password in the codeplug, this allows the radio to automatically log in to use Single Factor authentication upon power up or mode change. The
Two-Factor passcode is not stored in the codeplug.
English
You can upgrade the Single Factor session to a Two-
Factor session by entering the Two-Factor passcode only. After an interruption (for example mode change,
DSR switch over, power loss), the radio is capable of restoring the active session in its current state as long as the session is active in the server.
Note:
Power loss and power down are different activities, power down occurs when the user intentionally powers off the radio, power loss is when the battery dies or is removed from the unit.
Two-Factor Authentication
Two-Factor Authentication is an extension of existing
ARS and TMS operation. This feature allows you to authenticate yourself with a username, unit ID, password and passcode.
The purpose of this feature is to allow the sender of a text message to address a specific user of the radio, so the message is delivered to the user, not to the radio which may have any user using it at the time.
Secondly, this feature supports query authentication requirements so the query service knows which user originated a query.
You can still send text messages without logging in as a user. The user login feature only enables the recipient of your message to identify you as the sender by assigning a username to your message.
Note:
A predefined username that is set more than the maximum allowed characters is an invalid name.
Logging in via the Two-Factor Authentication
1 Perform one of the following actions:
•
• Press the preprogrammed User Login button.
or to User , and press the Menu Select button directly below User .
The display shows the User Login screen.
2 Perform one of the following actions:
•
• or to [ID Entry] and press the Menu
Select button directly below Edit . A blinking cursor appears. Use the keypad to type or edit a username. Press the Menu Select button directly below Ok to submit.
or to scroll through the list of predefined usernames. Press the Menu Select button 113
English
114
English directly below Sel to select the predefined username.
• Press and hold or to scroll through the list of predefined usernames at a fast scroll rate. Press the Menu Select button directly below Sel to select the predefined username.
If the selected predefined username has more than the maximum allowed characters, or an invalid character in it, the display shows momentary Invalid ID .
3 For radio enabled with Unit ID, perform one of the following actions:
•
•
or to [UnitID Entry] and press the Menu
Select button directly below Edit . A blinking cursor appears. Use the keypad to type or edit a Unit ID. Press the Menu Select button directly below Ok to submit.
or to scroll through the list of predefined
Unit IDs. Press the Menu Select button directly below Sel to select the predefined Unit ID.
• Press and hold or to scroll through the list of predefined Unit IDs at a fast scroll rate.
Press the Menu Select button directly below
Sel to select the predefined Unit ID.
If the selected predefined Unit ID has more than the maximum allowed characters, or an invalid character in it, the display shows momentary
Invalid UnitID .
4 Enter your password when you see a blinking cursor.
5 Press the Menu Select button directly below Logn or Ok .
If only one-factor is enabled, the display shows 1F logged at the status. The login operation is complete.
If login fails, the display shows momentary Login failed . The display returns to User Login screen.
6 For radio enabled with two-factor login, enter your passcode when you see a blinking cursor.
7 Press the Menu Select button directly below Logn .
The display shows In progress .
If the login fails, the display shows momentary 2F pscd failed . Press the Menu Select button directly below
Pscd to re-enter passcode. If successful, the display shows User Login screen with 2F logged in status to indicate Two-Factor Authentication complete.
Logging out of Two-Factor Authentication
Note:
Private data refers to all messages in the text messaging Inbox, Draft, and Sent folder. The next user is able to access the Inbox, Draft and Sent messages if private data is not deleted.
Radio which is successfully logged in to the secured system receives advertisement from the server that the access to the data for query is enabled.
1 Press the Menu Select button directly below Logt .
One of the following scenarios occurs:
• The display shows Clear private data?
.
• If the Delete Messages On Session End feature is enabled, the display shows momentary Private data cleared .
2 Select Yes to clear all your private data or select
No to keep your private data.
If you select Yes , the display shows momentary
Private data cleared .
Sending a Query
This feature is available for radio users who have successfully logged in with the Two-Factor
Authentication. Query is a special form of Quick Text marked with a flag that is replied or dispatched in normal TMS message. The query template needs to be configured in the quick test list of the CPS. You can choose from the quick text list, including queries if present.
You shall receive a service advertisement message to indicate the Query is available after you have successfully logged in the radio with a Two-Factor
Authentication.
Note:
The query server must be selected as the destination so that it can receive the query message and respond the query with text message. The query server must be an entry in the data user list in the CPS.
1 Perform one of the following actions:
• To access this feature via a preprogrammed button, press the preprogrammed TMS Query
.
115
English
116
English
• To access this feature via the menu, proceed to the next step.
2
or to TMS and press the Menu Select button directly below TMS to access the TMS feature screen.
3 Perform one of the following actions:
• or to Compose and press the Menu
Select button directly below Sel .
• Press the Menu Select button directly below
Exit to return to the Home screen.
4 or to Query and press the Menu Select button directly below Sel for a predefined message.
5 or to scroll through the list of messages and press the Menu Select button directly below Sel to select the required message.
The message appears on the Compose screen, with a blinking cursor at the end of it.
6 Use the keypad to edit the message, if required.
7 Press the Menu Select button directly below Optn .
8 or to Send Message and press the Menu
Select button directly below Sel .
9 Perform one of the following actions:
•
• or to scroll through the address list and highlight the required address.
or to [Other Recpnt] and press the Menu
Select button below Edit . A blinking cursor appears on the Enter Address screen. Use the keypad to type the address entry.
10 Press the Menu Select button below Send or the
PTT button to send the message.
The display shows the Send Message screen and
Sending msg .
If the message is sent, you hear a tone and the display shows Msg sent .
If the message is not sent, you hear a low tone, the display shows Send failed and returns to the main TMS screen.
Note:
The server responds to your query with the required report in text messages.
You can append a priority status and/or a request reply to your message. See
Status and Request Reply of a New Text
information.
Receiving a Query
You shall receive the information you have requested in TMS format.
When you receive a query, you hear a unique, highpitched chirp and the display shows the message icon flagged with “Priority”. The display shows momentary
New msg .
To access the Inbox, press and hold the Data
Feature button or the preprogrammed TMS
Feature button or press the Menu Select button directly below TMS .
The display shows a list of aliases or IDs, with the sender of the latest received message on top.
Secure Operations
Secure radio operation provides the highest commercially available level of voice security on both trunked and conventional channels.
Unlike other forms of security, Motorola digital encryption provides signaling that makes it virtually impossible for others to decode any part of an encrypted message.
Selecting Secure Transmissions
Turn the preprogrammed Secure/Clear switch to the secure position.
Note:
If the selected channel is preprogrammed for clear-only operation, when you press the PTT button, you hear an invalid mode tone and the display shows Clear TX only .
The radio does not transmit until you set the Secure/Clear switch to the clear position.
If the “Ignore Secure/Clear Switch when
Strapped” programming option is enabled, the radio transmits without displaying any
117
English
messages in the strapped mode of operation, regardless of the Secure/Clear switch setting. This option must be preprogrammed by a qualified radio technician.
The Secure/Clear switch only applies when the radio is transmitting.
118
Selecting Clear Transmissions
Turn the preprogrammed Secure/Clear switch to the clear position.
Note:
If the selected channel is preprogrammed for secure-only operation, when you press the PTT button, you hear an invalid mode tone and the display shows Secure TX only .
The radio does not transmit until you set the Secure/ Clear switch to the secure position.
You can request to configure the radio to ignore the clear voice or insecured transmission when the radio is in secured transmission. Check with your agent for details.
If the “Ignore Secure/Clear Switch when
Strapped” programming option is enabled, the radio transmits without displaying any messages in the strapped mode of operation, regardless of the Secure/Clear switch setting. This option must be preprogrammed by a qualified radio technician.
The Secure/Clear switch only applies when the radio is transmitting.
Managing Encryption
Loading an Encryption Key
Note:
Refer to the key-variable loader (KVL) manual for equipment connections and setup.
1 Attach the KVL to your radio.
The display shows Keyloading , and all other radio functions, except for power down, backlight, and volume, are locked out.
2 Select the required keys and press the Menu
Select button directly below LOAD on the KVL.
This loads the encryption keys into your radio.
English
When the key has been loaded successfully, one of the following scenarios occurs:
• You hear the radio sounds a short tone for singlekey radios.
• You hear the radio sounds an alternating tone for multikey radios.
The KVL indicates that keyload is successful.
Multikey Feature
This feature allows the radio to be equipped with different encryption keys and supports the DES-OFB algorithm.
There are two types:
Conventional
Multikey
The encryption keys can be tied
(strapped), on a one-per-channel basis, through Customer
Programming Software. In addition, you can have operator-selectable keys, operator-selectable keysets, and operator-selectable key erasure. If talkgroups are enabled in conventional, then the encryption keys are strapped to the talkgroups.
Trunked
Multikey
If the radio is used for both conventional and trunked applications, strap the encryption keys for trunking on a per-talkgroup or announcement-group basis. In addition, a different key can be strapped to other features, such as dynamic regrouping, failsoft, or emergency talkgroup. You can have operator-selectable key erasure.
Selecting an Encryption Key
1
or to Key .
2 Press the Menu Select button directly below Key .
The display shows the last user-selected and stored encryption key, and the available menu selections.
3 or to scroll through the encryption keys or use the keypad to enter the number of the desired key.
4 Perform one of the following actions:
119
English
120
English
• Press the Menu Select button directly below
Sel to save the newly selected key and return to the Home screen.
•
Press , the PTT button, or the Menu Select button directly below Exit .
• Turn the 16-Position Select knob to exit.
Note:
When the selected key is erased, you hear a momentary keyfail tone and the display shows Key fail .
When the selected key is not allowed, you hear a momentary illegal key tone and the display shows Illegal key .
Selecting a Keyset
This feature allows you to select one or more groups of several encryption keys from among the available keys stored in the radio.
For example, you could have a group of three keys structured to one keyset, and another group of three different keys structured to another keyset; by changing keysets, you would automatically switch from one set of keys to the other.
Every channel to which one of the original keys was tied now has the equivalent new key instead.
1
or to KSet and press the Menu Select button directly below KSet .
The display shows the last user-selected and stored keyset, and the available keyset menu selections.
2 or to scroll through the keysets or use the keypad to enter the number of the desired keyset.
3 Press the Menu Select button directly below Sel to save the newly selected keyset.
The radio exits keyset selection and returns to the
Home screen.
Note:
Press , the PTT button, or the Exit menu selection, or turn the 16-Position Select knob to exit this menu at any time without changing the keyset selection.
Erasing the Selected Encryption Keys
This feature allows you to erase all or selected encryption keys.
The following methods are options on how to erase the selected encryption keys. The result of all the methods is the same. You can use the options interchangeably depending on your preference and the programmed functions.
• Erasing the selected encryption keys via the radio menu: a) or to
Eras and press the Menu Select button directly below Eras .
The display shows the last user-selected and stored encryption key, and the available menu selections.
b) or to the desired encryption key or use the keypad to enter the number of the desired key.
c) Press the Menu Select button directly below
Optn .
The display shows the available key erase options.
d) or to the required option and press the
Menu Select button directly below Sel .
e) Select Erase all keys?
or Erase single key?
by pressing the Menu Select button below Yes to erase the encryption key(s) in the radio.
You can return to the previous screen by pressing the Menu Select button below No .
• Erasing the single key in radios with the single-key option and erasing all keys in radios with the multikey option via the preprogrammed Top Side
(Select) button and Top (Orange) button: a) Press and hold the Top Side (Select) button.
b) While holding Top Side (Select) button down, press the Top (Orange) button.
The display shows Please wait . When all the encryption keys have been erased, the display shows All keys erased .
Note:
Do not press the Top (Orange) button before pressing the Top Side (Select) button, unless you are in an emergency situation as this sends an emergency alarm.
Requesting an Over-the-Air Rekey (ASTRO
Conventional Only)
Ensure that the Unique Shadow Key (USK) is loaded into the radio with the key-variable loader (KVL) before the rekey request can be sent. Refer to your
121
English
122
English local key management supervisor for more information.
This feature, also known as OTAR, allows the dispatcher to reprogram the encryption keys in the radio remotely. The dispatcher performs the rekey operation upon receiving a rekey request from the user.
1
or to Reky .
2 Press the Menu Select button directly below Reky .
3 Perform one of the following actions:
• Press the PTT button to send the rekey request.
•
Press the PTT button again, or the or
Emergency button, to exit the feature and transmit in normal mode.
If the rekey operation fails, you hear a bad-key tone and the display shows Rekey fail .
Note:
The rekey operation failure indicates that your radio does not contain the Unique
Shadow Key (USK).
MDC Over-the-Air Rekeying (OTAR) Page
This feature allows you to view or define MDC Overthe-Air Rekeying (OTAR) features. It is applied only when operating in secure encrypted mode and only for conventional communications. In additional to
Rekey Requests, OTAR transmissions include
Delayed Acknowledgements, and Power-up
Acknowledgements.
Some of the options selected may also need to be set up at the Key Management Controller (KMC) site to work properly.
Note:
This feature must be preprogrammed by a qualified radio technician. Check with your dealer or system administrator for more information.
Infinite UKEK Retention
This feature enables Unique Key Encryption Key
(UKEK) to be permanently stored in the radio even when all of the encryption keys is erased. Without this
UKEK key, the radio could not be over the air rekeyed.
Note:
This feature must be preprogrammed by a qualified radio technician. Check with your dealer or system administrator for more information.
Hear Clear
Note:
This feature must be preprogrammed by a qualified radio technician. Check with your dealer or system administrator for more information.
There are two components of Hear Clear.
Companding Reduces the channel noise, e.g.
OTA transmission, that is predominantly present in UHF2 and
900 MHz channel with the following features.
Compressor Reduces the background noise flow and the speech signal at transmitting radio.
Expander Expands the speech while the noise flow remains the same at receiving radio.
Random FM
Noise
Canceller
(Flutter
Fighter)
Reduces the unwanted effects of random FM noise pulses caused by channel fading under high Signal-to-
Noise (S/N) conditions such as in a moving transportation. The fading effects, heard as audio pops and clicks, are cancelled without affecting the desired audio signal.
The Random FM Noise Canceller operates only in receive mode.
Security
Radio Lock
This feature changes your radio to a more robust security system that protects the use of the secure encryption keys.
123
English
124
English
If this feature is enabled in your radio by a qualified radio technician, when you turn the radio on, the display shows Radio locked .
Unlocking Your Radio
1 Enter your numeric password.
Secure-equipped radios – 6 to 8 characters.
Clear radios – 0 to 8 characters.
2 Perform one of the following actions:
• Press the Menu Select button directly below
Sel to enter the code.
• Press the Menu Select button directly below
Del to delete any unwanted characters.
• Press the Menu Select button directly below
Cncl to exit the feature.
If the password is correct, the radio unlocks.
If the password is incorrect, the display show
Incorrect password and the radio remains locked.
If you enter three incorrect passwords in a row, the display shows Deadlock . Turn the radio off and then on, and begin again at Step
.
Important:
For Secure Radios Only – After a total of
17 consecutive incorrect passwords
(turning the radio off and on does not reset this number), the radio erases all of its encryption keys and shows Deadlock . See a qualified radio technician.
If you forget the password, enter ******** to erase all keys and revert the password in the radio back to the default password of
01234567.
Changing Your Password
1
or to Pswd .
2 Press the Menu Select button directly below Pswd .
The display shows Change Password screen.
3 or to Unlock Pswd .
4 Press the Menu Select button directly below Sel .
5 Enter the old password.
6 Press the Menu Select button directly below Ok .
7 Enter the new password.
8 Press the Menu Select button directly below Sel .
9 Re-enter the new password.
10 Press the Menu Select button directly below Sel .
The password is updated.
If the two passwords do not match, repeat Steps
through
.
Note:
If you enter three incorrect old passwords, the radio exits the password feature. You cannot access this feature again until you turn the radio off and on.
Changing Your Tactical Inhibit Password
1
or to Pswd .
2 Press the Menu Select button directly below Pswd .
The display shows Change Password screen.
3 or to Tactical Inh Encode Pswd .
4 Press the Menu Select button directly below Sel .
5 Enter the old password.
6 Press the Menu Select button directly below Ok .
7 Enter the new password.
8 Press the Menu Select button directly below Sel .
9 Re-enter the new password.
10 Press the Menu Select button directly below Sel .
The password is updated.
If the two passwords do not match, repeat Steps
through
.
Note:
If you enter three incorrect old passwords, the radio exits the password feature. You cannot access this feature again until you turn the radio off and on.
Enabling or Disabling the Radio Lock Feature
(Secure Radios Only)
This feature allows you to enable or disable the radio lock feature. It is programmable by a qualified radio technician.
125
English
1
or to Logf .
2 Press the Menu Select button directly below Logf .
One of the following results occur.:
• The display shows Pswd enabled , indicating that the radio lock feature is enabled.
• The display shows Pswd disabled , indicating that the radio lock feature is disabled.
126
Radio Stun and Kill
Radio Stun
This feature allows you to stun another radio by sending an over the air command using the menu on your radio. This feature prevents an unauthorized user from using the radio. Once the radio is stunned, a password is required to re-activate the stunned radio.
Using Radio Stun
1
or to Stun .
2 Press the Menu Select button directly below Stun .
The display shows Enter Password .
English
3 Use the keypad to enter your Tactical Inhibit
Encode Password.
4 Press the Menu Select button directly below Ok .
The display shows radio Contact IDs.
5 Perform one of the following actions:
• or to the required ID.
• Press the Menu Select button directly below
LNum to go to the last number dialed.
• Use the keypad to enter the required ID.
• Press the Menu Select button directly below
Send to initiate command.
If the receiving radio does not have encryption key to decrypt the received command, your radio display shows Ack received .
If the receiving radio does not have encryption key to decrypt the received encrypted command, your radio display shows Decrypt failed .
If the receiving radio is powered off, your radio display shows No Acknowledgement .
Once the receiving radio received the command, its screen locked and request for password.
Note:
To un-stun a radio, follow the procedure in
Unlocking Your Radio on page 124.
Radio Kill
This feature allows you to render your radio or another radio inoperable if the radio is misplaced or lost. When a radio is killed, the display turns blank and all functions of the radio are not usable.
The killed radio can only be recovered from KILL with a special device. Consult an authorized and qualified technician for details.
Using Remote Kill to Kill Another Radio
Remote Kill allows you to render another radio inoperable by sending an over the air command using the menu on your radio.
1
or to Kill .
2 Press the Menu Select button directly below Kill .
The display shows Enter Password .
3 Use the keypad to enter your Tactical Inhibit
Encode Password.
4 Press the Menu Select button directly below Ok .
The display shows radio Contact IDs.
5 Perform one of the following actions:
• or to the required ID.
• Press the Menu Select button directly below
LNum to go to the last number dialed.
• Use the keypad to enter the required ID.
• Press the Menu Select button directly below
Send to initiate command.
If the receiving radio received the command, your radio display shows Ack received .
If the receiving radio does not have encryption key to decrypt the received encrypted command, your radio display shows Decrypt failed .
If the receiving radio is powered off or already killed, your radio display shows No
Acknowledgement .
Once the receiving radio received the command, its screen turns blank, the killed radio is inoperable.
127
English
Using Direct Kill to Kill Your Own Radio
Direct Kill allows you to make your own radio inoperable.
Press and hold the Top Side button then press the Orange button until the display turns blank and becomes inoperable.
128
Global Positioning System / Global
Navigation Satellite System
The Global Navigation Satellite System (GNSS) in the radio uses information from the Global Positioning
System (GPS) to determine the approximate geographical location of your radio. The geographical location is expressed as latitude and longitude or
Military Grid Reference System (MGRS) format per request from customers.
Note:
This feature is addressed as GPS across the manual as the naming convention of the buttons and strings remain the same as the legacy feature of GPS.
The availability and accuracy of this location information (and the amount of time that it takes to calculate it) varies depending on the environment in which you are using the GPS feature.
For example, GPS location fixes are difficult to obtain indoors, in covered locations, between high buildings, or in situations where you have not established a clear broad view of the sky.
Once GPS is enabled, the radio displays the GPS icon on the screen. The dispatcher can always request the system to determine the real-time location coordinates of the radio.
GPS Operation
The GPS technology uses radio signals from earth orbiting satellites, to establish the location coordinates, maximizing your view of clear unobstructed sky is essential for optimum performance.
Where adequate signals from multiple satellites are not available (usually because you cannot establish a view of a wide area of the sky), the GPS feature of your radio will not work. Such situations include but are not limited to:
• Underground locations
English
• Inside of buildings, trains, or other covered vehicles
• Under any other metal or concrete roof or structure
• Between tall buildings or under dense tree-cover
• In temperature extremes outside the operating limits of your radio
Even where location information can be calculated in such situations, it may take longer to do so, and your location estimate may not be as accurate. Therefore, in any emergency situation, always report your location to your dispatcher.
Keep in mind that the accuracy of the location information and the time it takes to obtain it varies depending upon circumstances, particularly the ability to receive signals from an adequate number of satellites.
Note:
Even where adequate signals from multiple satellites are available, your GPS feature only provides an approximate location, usually within 10 meters from your actual location, but sometimes farther away.
The satellites used by the GPS feature are controlled by the U.S. government and are subject to changes implemented in accordance with the Department of
Defense GPS user policy and the Federal Radio
Navigation Plan. These changes may affect the performance of the GPS feature on your radio.
GPS Performance Enhancement
Sometimes, the GPS feature may be unable to complete a location calculation successfully. You then see a message indicating that your radio cannot connect to enough visible satellites.
To maximize the ability of your radio to determine a fix, take note of the following guidelines:
• For your initial fix, hold the radio in the face position.
• Stay in the open. The GPS feature works best where there is nothing between your radio and a large amount of open sky.
The Outdoor Location Feature (Using GPS)
This feature allows you to determine your current location using a location menu, as well as your current distance and bearing in relation to another
129
English
130
English location. Radio location may be requested and reported over-the-air.
Your radio stores up to a maximum of sixty (60) programmable location coordinates, also known as waypoints. When the memory is full, the next waypoints automatically replaces the oldest waypoints in the radio.
The radio also stores four (4) preprogrammed waypoints. These coordinates cannot be deleted.
The following table shows the differences between programmable waypoints and preprogrammed waypoints.
Programmable Waypoints
User-configurable location coordinates.
Preprogrammed Waypoints
Fixed location coordinates:
• Home
• Emergency
• Last Known Location
• Destination
Programmable Waypoints
Preprogrammed Waypoints
Only the alias is editable, not the coordinates.
The Home and Destination coordinates are editable.
Coordinates can be deleted one at a time, or all at once.
Coordinates cannot be deleted.
Note:
The radio automatically exits the feature, if the feature inactivity timer is enabled, when the radio is left idle and the timer expires. You hear the Menu Inactive Exit Tone upon feature exit.
Military Grid Reference System (MGRS) Coordinates
This feature can only be enabled through CPS configuration. When the MGRS coordinate is enabled, all location coordinates are displayed in MGRS format, including the editable locations in GPS.
Accessing the Outdoor Location Feature
Note:
An ON radio menu may be present on the
Location menu screen if it is preprogrammed by the dealer or system administrator.
Press the preprogrammed GPS button to toggle the
Outdoor Location feature to on or follow the following procedure to access this feature via the radio menu.
1
or to Loc .
2 Press the Menu Select button directly below Loc .
The display shows Location off .
3 Perform one of the following actions:
• To obtain a location fix, press the Menu Select button directly below On .
• Press the Menu Select button directly below
Optn . or to Turn On GPS and press the
Menu Select button directly below Sel .
The front display shows the MGRS or latitude/ longitude location, time, and date of the last successful location fix.
4 To obtain a new location fix, press the Menu
Select button directly below Rfsh .
The top line temporarily displays Please wait while the new location is being determined. While the new location is being determined, the location signal can be a solid or blinking icon.
Once the location coordinates are fixed, the display shows the current location along with the
UTC (Zulu) time and date that the location fix was obtained.
The location coordinates are updated automatically every 5 seconds while the location signal is present.
If the radio fails to get a location fix, the display shows No service and returns to the previous display.
5 To return to the Home screen, press , the PTT button, the preprogrammed GPS button or the
Menu Select button directly below Exit .
Saving a Waypoint
Ensure that your radio shows the current location on the screen.
131
English
132
English
1 Press the Menu Select button directly below Optn .
2 Perform one of the following actions:
•
•
• or to Save as Waypt and press the Menu
Select button directly below Sel .
or to Save as Home and press the Menu
Select button directly below Sel and proceed to step
or to Save as Dest.
and press the Menu
Select button directly below Sel and proceed to step
A blinking cursor appears in the screen.
3 Use the keypad to edit the auto-generated waypoint, if required, or press the Menu Select button directly below Cncl to return to the Location main screen.
4 Press the Menu Select button directly below Ok once you are done.
One of the following scenarios occur:
• The display shows Current loc saved as
<Waypoint name> .
• The display shows Current loc saved as [Home] .
• The display shows Current loc saved as
[Destination] .
5 To return to the Home screen, press , the PTT button, the preprogrammed GPS button or the
Menu Select button directly below Exit .
Viewing a Saved Waypoint
Ensure your radio shows the current location on the screen.
1 Press the Menu Select button directly below Optn .
2 or to Waypoints and press the Menu Select button directly below Sel .
The display shows a list of waypoints.
3 Perform one of the following actions:
•
• or to scroll through the list.
or to select a waypoint to view the location information in full.
4 Press the Menu Select button directly below Optn .
5 To view the MGRS or latitude/longitude location, time and date of the selected waypoint, or to
View and press the Menu Select button directly below Sel .
6 To return to the previous screen, press the Menu
Select button directly below Back , or to return to the Home screen, press , the PTT button, or the preprogrammed GPS button.
6 Perform one of the following actions:
•
• Press the Menu Select button directly below
Ok once you are done.
Press the Menu Select button directly below
Cncl to return to the Waypoints main screen.
Editing the Alias of a Waypoint
Ensure your radio shows the current location on the screen.
1 Press the Menu Select button directly below Optn
2 or to Waypoints and press the Menu Select button directly below Sel .
The display shows a list of waypoints.
.
7 The display shows <Waypoint name> Updated and the radio returns to the Waypoints main screen.
8 Perform one of the following actions:
• Press the Menu Select button directly below
Back to return to the previous screen.
•
Press , the PTT button, or the preprogrammed GPS button to return to the
Home screen.
3 or to the required saved waypoint, and press the Menu Select button directly below Optn .
4 or to Edit name and press the Menu Select button directly below Sel .
A blinking cursor appears in the Edit Name screen.
Editing the Coordinates of a Waypoint
Note:
Only the preprogrammed coordinates of Home and Destination can be edited by the user.
Ensure your radio shows the current location on the screen.
5 Use the keypad to edit the alias.
1 Press the Menu Select button directly below Optn .
133
English
134
English
2 or to Waypoints and press the Menu Select button directly below Sel .
The display shows a list of waypoints.
3 Perform one of the following actions:
•
• or to [Home] and press the Menu Select button directly below Optn .
or to [Destination] and press the Menu
Select button directly below Optn .
4 or to Edit location and press the Menu
Select button directly below Sel .
The first number blinks.
5 Utilize the following control buttons to select the number/coordinates if required, then press the
Menu Select button directly below Edit to change the number/coordinates.
•
Press to move to the previous number/ coordinates.
•
Press to move to the next number/ coordinates.
A blinking cursor appears in the Edit Location screen.
6 Utilize the following control buttons or menu to change the number/coordinates if required then press the Menu Select button directly below Ok once.
•
Press to move one space to the left.
•
Press to move one space to the right.
• Press the Menu Select button directly below
Del to delete any unwanted characters.
• Press the Menu Select button directly below
Cncl to return to the previous screen
7 Press the Menu Select button directly below Ok once complete setting up the new Home or
Destination.
One of the following scenarios occurs:
• The display shows [Home] Updated and the radio returns to the Waypoints main screen.
• The display shows [Destination] Updated and the radio returns to the Waypoints main screen.
Deleting a Single Saved Waypoint
Ensure your radio shows the current location on the screen.
1 Press the Menu Select button directly below Optn .
2 or to Waypoints and press the Menu Select button directly below Sel .
The display shows a list of waypoints.
3 Perform one of the following actions:
• or to the required saved waypoint, and press the Menu Select button directly below
Optn . or to Edit name and press the Menu
Select button directly below Del .
• Press the Menu Select button directly below
Del .
4 The display shows Delete <Waypoint name>
Confirm?
.
5 Press the Menu Select button directly below Yes to delete the waypoint or press the Menu Select button directly below No to return to the Waypoints main screen.
The display shows <Waypoint name>deleted .
Deleting All Saved Waypoints
Ensure your radio shows the current location on the screen.
Note:
You cannot delete any of the preprogrammed waypoints.
1 Press the Menu Select button directly below Optn .
2 or to Waypoints and press the Menu Select button directly below Sel .
The display shows a list of waypoints.
3 or to the required saved waypoint, and press the Menu Select button directly below Optn .
4 or to Delete All and press the Menu Select button directly below Sel .
The display shows Delete All saved waypnts
Confirm?
.
5 Press the Menu Select button directly below Yes to delete all waypoints or press the Menu Select button directly below No to return to the Waypoints main screen.
135
English
136
The display shows All saved waypnts deleted .
Measuring the Distance and Bearing from a Saved
Waypoint
Ensure your radio shows the current location on the screen.
1 Press the Menu Select button directly below Optn .
2 or to Dist frm here and press the Menu
Select button directly below Sel .
The display shows a list of waypoints.
3 or to the required waypoint and press the
Menu Select button directly below Sel .
The display shows the distance and bearing from the current to the selected coordinates.
Location Feature in Emergency Mode
When the Emergency feature is activated by pressing the emergency button, the radio exits the Location menu and returns to the Home (default) screen so that you can see which channel the emergency signal is going out on.
However, you may re-enter the Location menu while still in emergency mode, provided that Silent
Emergency has not been activated.
If you have turned Location off using the ON/OFF menu key, it automatically turns back on when
Emergency is activated.
If there is a solid location signal during Emergency, the current location and the location information received is saved as Emergency and Last Known
Location waypoints, respectively.
Peer-Location on the Display (ASTRO Conventional only)
This feature is only available for radio-to-radio voice transmissions, dispatch call and selective call in conventional ASTRO system. For radio-to-radio transmission, in order to allow the radio to show peerlocation, the voice should be directly sent from one radio to another radio without passing through any infrastructure facility such as repeaters, phone or
DVRS system. Both the transmitting radio and receiving radio must be configured to enable them to send and/or receive the GPS coordinates. You can check with your nearest qualified technician for more details.
English
Note:
If the receiving radio is operating in a Mixed
Mode channel, only if its voice transmission is via conventional ASTRO system then it can receive the location coordinates of its peers.
This feature is also operable in a Scan Active channel or Scan Talkback channel.
Upon receiving a voice transmission with GPS coordinates enabled on the receiving radio, the display shows the coordinates available in full or in short coordinates. There are two different formats available. Refer to the following list for the details shown in the Peer-Location quick text. Consult your agent to pick the best format to configure to your radio.
Full location coordinates
•
• PTT ID (This is optional.)
Longitude and latitude
• Relative distance or direction.
Short location coordinates
•
• PTT ID (This is optional.)
Longitude and latitude
Note:
If the transmitting radio is stale at its location after a period of time, the receiving radio display shows ID:<PTT ID> Last Knwn Loc:
<Coordinates> . The ID:<PTT ID> and <distance> are optional details depending on the requirements of usage.
If the transmitting radio does not have GPS or the receiving radio could not decode the GPS signal of the received signal, the receiving radio display shows ID:<PTT ID> Unknown
Loc . The PTT ID is optional to be shown on the display per requirements of usage.
Geofence (ASTRO 25 Trunking System)
Geofence is a virtual perimeter based on the GPS to define a geographical area on earth.
When the radio enters the predefined Geofence area, your radio receives the Dynamic Regroup command from the system and immediately connects to a
Dynamic Regroup talkgroup. The radio display shows the new selected Dynamic Regrouped talkgroup with green intelligent light for your attention.
137
English
138
On top of that, additional features are Voice
Announcement of the new channel, and also direct content display of a text message to indicate that you are currently at Geofence area. Check with your nearest qualified technician on the requirements for these enhancements to work in Geofence.
Any new text messages received at Geofence shall have its content displayed immediately on the radio display.
Note:
If the radio is set up in DVRS, only mobile radio is supported for this feature.
Entering the Geofence Area
The Voice Announcement and TMS display in this feature are optional. They must be configured to enable you to hear and see these indicators.
When the radio enters a Geofence area, the radio immediately sends a message ACK back to the system.
The radio searches the current zone for the channel with same talkgroup assigned as the Dynamic
Talkgroup and also with same system ID of current
English trunk system. Once matched, the radio display shows the first matched and connected channel alias.
If there is no channel with matched Talkgroup ID and trunk system ID, the radio display shows the channel alias of <DYNAMIC talkgroup> .
Once the radio is connected, you hear a dynamic regroup tone, the radio display shows <DYNAMIC channel> with temporary green color intelligent backlight and you hear a Voice Announcement.
Note:
When the radio loss the GPS signal the GPS icon blinks and the radio sounds two highpitched tones repetitively to indicate GPS fails to operate. The radio display shows red intelligent light.
Note:
If the first matched channel is not configured with Voice Announcement, no Voice
Announcement is played.
The system sends a message to your radio. The radio display shows a direct text message content without any user operation. This message indicates you are currently present in a Geofence area. This TMS
remains open on the display until user presses exit/ home to exit this screen.
Note:
If there is another incoming text message before you exit the previous message, the message screen shall be refreshed to show the latest message.
The following procedure guides you to exit the text message received.
Press the Menu Select button below Exit or to return to Home screen.
The other operations are the same as normal dynamic regroup command.
When the radio exits the Geofence area, your radio reverts to original channel or newly assigned talkgroup. The radio display shows the new channel together with Voice Announcement to indicate the changes. Voice Announcement of the new channel only works if that channel is configured with Voice
Announcement.
Trunking System Controls
Operating in Failsoft System
The failsoft system ensures continuous radio communications during a trunked system failure. If a trunking system fails completely, the radio goes into failsoft operation and automatically switches to its failsoft channel.
During failsoft operation, your radio transmits and receives in conventional operation on a predetermined frequency. You hear a mediumpitched tone and the display shows Failsoft .
When the trunking system returns to normal operation, your radio automatically leaves failsoft operation and returns to trunked operation.
To continue, in Failsoft, to communicate with other talkgroups, refer to the following procedure.
1 Rotate the Mode Knob to change to a different repeater frequency.
2 Press the PTT button to talk, and release the button to listen.
139
English
140
Out-of-Range Radio
When your radio goes out of the range of the system, it can no longer lock onto a control channel.
You hear a low-pitched tone and/or the display shows the currently selected zone/channel combination and
Out of range . Your radio remains in this out-of-range condition until it locks onto a control channel, it locks onto a failsoft channel, or it is turned off.
Site Trunking Feature
If the zone controller loses communication with any site, that site reverts to site trunking.
The display shows the currently selected zone/ channel combination and Site trunking .
Note:
When this occurs, you can communicate only with other radios within your trunking site.
Locking and Unlocking a Site
This feature allows your radio to lock onto a specific site and not roam among wide-area talkgroup sites.
This feature should be used with caution, since it inhibits roaming to another site in a wide-area system.
You can toggle the lock state between locked and unlocked by pressing the preprogrammed Site Lock/
Unlock button.
Follow the following procedure to lock and unlock a site via the radio menu.
1
or to Site .
2 Press the Menu Select button directly below Site .
3 Perform one of the following actions:
• To lock the site, press the Menu Select button directly below Lock . The display shows Site locked .
• To unlock the site, press the Menu Select button directly below Unlk . The display shows
Site unlocked .
The radio saves the new site lock state and returns to the Home screen.
Site Display and Search Button
The Site Display and Site Search button allows you to view the name of the current site or force your radio to change to a new one.
English
Viewing the Current Site
Perform one of the following actions:
•
• Press the preprogrammed Site Displ/Srch button.
or to RSSI and press the Menu Select button directly below RSSI .
The display shows momentary the name of the current site and its corresponding received signal strength indicator (RSSI).
Changing the Current Site
Perform one of the following actions:
• Press and hold down the preprogrammed Site
Displ/Srch button.
• Press and hold down the Menu Select button directly below RSSI .
You hear a tone and the display shows momentary Scanning site .
When the radio finds a new site, it returns to the
Home screen.
Mission Critical Wireless - Bluetooth
®
-
This feature allows your radio to extend its functionality by connecting to external proprietary
Motorola accessories.
Note:
It is recommended to use Motorola proprietary
Mission Critical Wireless (MCW) devices with
APX radios during Mission Critical operations as other Bluetooth ® devices may or may not meet the mission critical standard.
Your radio must be preprogrammed to allow you to use this feature.
The use of this feature requires the "Full
Feature" expansion board together with the
Bluetooth Software.
The default setting for Bluetooth-enabled radio is
Bluetooth on. See
Turning Off the Bluetooth on page
142 to turn off the Bluetooth.
Currently your radio supports the following Bluetooth devices or profiles.
• Headset (HSP)
• Dial Up Networking (DUN) 141
English
142
• Personal Area Networking (PAN)
• Serial Port (SPP)
Turning On Bluetooth
The following methods are options on how to turn on the Bluetooth. The result of all the methods is the same. You can use the options interchangeably depending on your preference and the programmed functions.
• Turning on the Bluetooth via the radio menu BT : a) or to
BT . To access the Bluetooth feature screen, press the Menu Select button directly below BT .
b) or to Status and press the Menu Select button directly below On .
The display shows Status On , and appears.
If Bluetooth fails to launch, the display shows
Bluetooth on failed .
c) To return to the Home screen, press the Menu
Select button directly below Exit .
• Turning on the Bluetooth via the preprogrammed button: a) Press the preprogrammed button to turn on the
Bluetooth.
You hear a short, medium-pitched tone. The display shows momentary Bluetooth on , and appears.
If Bluetooth fails to launch, the display shows
Bluetooth on failed .
Turning Off the Bluetooth
The following methods are options on how to turn off the Bluetooth. The result of all the methods is the same. You can use the options interchangeably depending on your preference and the programmed functions.
• Turning off the Bluetooth via the radio menu BT : a) or to
BT . To access the Bluetooth feature screen, press the Menu Select button directly below BT .
b) or to Status and press the Menu Select button directly below Off .
The display shows Status Off , and disappears.
English
c) To return to the Home screen, press the Menu
Select button directly below Exit .
• Turning off the Bluetooth via the preprogrammed button: a) Press the preprogrammed button to turn off the
Bluetooth.
You hear a short, medium-pitched tone. The display shows momentary Bluetooth off and disappears.
Re-Pair Timer
There are two options for configuring the Bluetooth pairing type of the radio. The type defines the duration the radio and the accessory retain the pairing information.
Immediate (For MCW accessories only.) When the radio and/or device is turned off after pairing, the keys are lost. Due to this, when your radio and your device are turned on again, they are unable to reconnect. The user must re-pair the devices to re-establish a new set of
pairing keys. See Pairing with Low
Infinite
Frequency-Motorola Proximity Pairing
on page 145 and
Standard Pairing Feature on page 147.
(For all Bluetooth devices.) When the radio and/or device are turned off after pairing, keys are not lost. When the radio and the device are turned on again, they can resume the Bluetooth connection without user intervention.
Re-Pair Timer Options
Re-Pair Timer Scenarios
Immediate
(For MCW Accessories only)
• When the radio is powered off, pairing key is lost immediately, and accessory attempts to pair again. If pairing is unsuccessful within the Drop Timer value, the accessory automatically powers off.
• When the accessory is powered off, all keys are lost immediately, and the user must re-pair the devices.
143
English
Re-Pair Timer Options
Re-Pair Timer Scenarios
• When the device loses Bluetooth connection, the device will attempt to re-establish Bluetooth
Connection within the Drop Timer value.
Infinite (For all
Bluetooth devices)
• When the radio is powered off, the accessory attempts to re-establish the Bluetooth Connection for a period of time depending upon the Drop Timer value. If the device fails to reconnect within the period, the accessory then powers off.
Bluetooth Drop Timer
The Bluetooth Drop Timer has two different settings and functions, depending upon the selection of the
Re-Pair Timer.
144
English
Re-Pair Timer
Options
Description
Immediate
(For MCW Accessories only)
0 – 15 minutes programmable buffer time to re-establish the Bluetooth Connection when the Bluetooth signal is out of range.
If either device powers off, the pairing keys are immediately cleared from both devices and the devices must re-pair.
Infinite (For all
Bluetooth devices)
This Timer only applies to the accessory. The programmable timer choices are: 0 – 15 minutes, 2 hours, 4 hours or 8 hours.
Do note there are exceptions for
Operation Critical Wireless (OCW) headset and PTT which are preprogrammed to 8 hours.
This timer is a "stay alive" timer where the accessory remains on without the device reconnecting before powering off. The radio remains on until the user powers off
Re-Pair Timer
Options
Description the radio. The radio and accessory remains paired indefinitely. Once the device re-connect, the timer is reset.
The radio could not control the Drop Timer of
Personal Area Networking (PAN), Dial-Up Networking
(DUN), Commercial Off- The-Shelf (COTS) and data services. It depends on the specifications of these external devices.
Check with your dealer or system administrator for more information about these timers.
To establish the Bluetooth Connection, see
Pairing with Low Frequency-Motorola Proximity Pairing (LF-
on page 147 .
Pairing with Low Frequency-Motorola Proximity Pairing
(LF-MPP) Feature
Ensure that Bluetooth feature of your radio is on and the Bluetooth tones are enabled.
Bluetooth tones, Bluetooth menu and preprogrammed buttons must be preprogrammed by a qualified radio technician. Check with your dealer or system administrator for more information.
The range of Bluetooth operation when using a MCW accessory is 10 meters line-of-sight communication.
This is an unobstructed path between the location of the signal transmitter (your radio) and the location of the receiver (your device or accessory).
Obstacles that can cause an obstruction in the line-ofsight include trees, buildings, mountains, cars and etc.
It is not recommended that you leave your radio behind and expect your accessory to work with a high degree of reliability when they are separated.
At the fringe areas of reception, both voice and tone quality will start to sound "garbled" or "broken". To correct this problem, simply position the accessory and radio closer to each other (within the 10 meter defined range) to re-establish clear audio reception.
Note:
Once a COTS headset is paired to your radio, it is always connected. Therefore the battery life of the accessory is aligned with the Talk
145
English
146
English
Time power consumption, not the Standby
Time consumption.
Turn on the accessory. Then, place it close to the radio aligning the Bluetooth Pairing Location (a blue dot) on the radio to the Bluetooth Pairing
Location (a blue dot) on the accessory.
If the pairing process is successful, you hear an incremental-pitched tone. The radio begins to connect to the device.
If the pairing process fails, you hear a short, lowpitched tone. The display shows Bluetooth pairing failed . Repeat this step.
The radio tries to establish connection with the device once paired.
Note:
If the connection fails within 6 seconds, you hear a decremental-pitched tone to indicate that the device is unpaired. The display shows
<Device Type> unpaired . Repeat this step to reinitiate the pairing process.
If the connection is successful, you hear an incremental-pitched tone. The display shows <Device
Type> connected and the Bluetooth icon turns from to .
If the radio has the pairing record of the device and the connection fails, you hear a short, low-pitched tone. The display shows <Device Type> connect failed .
Radio Indications of Lost Bluetooth Connection
The radio shows
The starts blinking for up to 10 seconds. You hear a decremental-pitched tone. The display shows
<Device Type> connected , and
alternating with disconnected
is replaced by a persistent .
.
If the Bluetooth device successfully re-connects before the Bluetooth 10 second Re-Connection Timer expires, the display shows momentary <Device Type>
stops blinking, or if the Bluetooth device fails to re-connect within 10 seconds, the blinking
when the device has a Bluetooth connection. Below is the scenario and radio indications when the connection is interrupted.
Standard Pairing Feature
Note:
Bluetooth tones, Bluetooth menu and preprogrammed buttons must be preprogrammed by a qualified radio technician. Check with your dealer or system administrator for more information.
Once a COTS headset is paired to your radio, it is always connected. Therefore the battery life of the accessory is aligned with the Talk time power consumption, not the Standby time consumption.
The Bluetooth Standard Pairing feature enables your
Bluetooth enabled radio to search for other Bluetooth enabled and discoverable device. Once the device is discovered, you can initiate your radio to send a pairing request to pair with the device.
This feature also enables your Bluetooth enabled radio to be visible to another Bluetooth enabled device and receive request to pair from other device.
The Standard Pairing feature supports pairing
Authentication Personal Pairing Number or PIN which ensure your radio recognizes the correct device to pair. The PIN must be exchanged with the radio or the device before the pairing completes. Your radio prompts for the Authentication PIN when needed.
Refer to your device’s manual for details about the
Bluetooth Authentication PIN of your device if needed.
Searching and Pairing the Bluetooth Device
Ensure the Bluetooth on your device is turned on and is set to Discoverable in order to enable your radio to detect your device in Bluetooth.
Bluetooth Search in Bluetooth Standard Pairing method is used to scan for other Bluetooth devices nearby. It is set to off by default.
1 Perform one of the following actions:
•
• Press the preprogrammed Bluetooth Search button.
or to BT . Press the Menu Select button directly below BT to access the Bluetooth feature screen. or to Search Devices and press the Menu Select button directly below
On .
If successful, the display shows Searching for BT devices followed by the names of Bluetooth devices found, if any. When the search timer 147
English
148
English expires, Available Dev screen shows a list of
Bluetooth devices found. To stop the search before the search timer expires, press the preprogrammed Bluetooth Search button or the
Menu Select button below Stop .
If the feature fails to initiate, the radio sounds a short, low-pitched tone. The screen shows BT
Search failed . Press the Menu Select button below
Back to return to Bluetooth feature screen, or press or the Menu Select button below Exit to return to Home screen.
2 or to the device name and press the Menu
Select button directly below Sel to connect to the device.
The radio starts pairing to the device.
To continue with Bluetooth pairing, see Pairing with
Low Frequency-Motorola Proximity Pairing (LF-MPP)
on page 145.
Turning On Bluetooth Visibility
Turning Bluetooth visibility to on enables other
Bluetooth devices to search for your radio. The visibility of the Bluetooth is set to off by default.
The following methods are options on how to turn on
Bluetooth visibility. The result of all the methods is the same. You can use the options interchangeably depending on your preference and the programmed functions.
• Turn on Bluetooth visibility via radio menu BT : a) or to
BT . Press the Menu Select button directly below BT to access the Bluetooth feature screen.
b) or to Visibility and press the Menu
Select button directly below On .
The status changes to Visible to all . Visibility mode is enabled.
When the timer expires, the status changes to
Visibility failed . Repeat the procedure to turn on
Bluetooth visibility.
• Turn on Bluetooth visibility via the preprogrammed button.
a) Press the preprogrammed button to enable the
Bluetooth visibility feature.
You hear a short, medium-pitched tone. The display shows momentary Visible to all .
Visibility mode is enabled.
When the timer expires, the display shows momentary Visibility failed . Repeat the procedure to turn on Bluetooth visibility.
Note:
Press the preprogrammed button to toggle the Bluetooth visibility on or off.
Receiving Pairing Request from other Devices
When your radio receives a pairing request from other device, the display shows <Device Friendly Name>pair request .
Press the Menu Select button below Ok to accept or Cncl to refuse pairing request.
Turning Off Bluetooth Visibility
Ensure that Bluetooth Visibility is turned on.
The following methods are options on how to turn off
Bluetooth visibility. The result of all the methods is the same. You can use the options interchangeably depending on your preference and the programmed functions.
• Turn off Bluetooth visibility via radio menu BT : a) or to
BT . Press the Menu Select button directly below BT to access the Bluetooth feature screen.
b) or to Visibility and press the Menu
Select button directly below Off .
The display shows Visibility Off .
When the timer expires, the status changes to
Visibility off failed . Repeat this step to turn off
Bluetooth visibility.
c) To return to the Home screen, press the Menu
Select button directly below Exit .
• To disable the Bluetooth visibility, press the preprogrammed button.
You hear a short, medium-pitched tone. The display shows momentary Visibility Off . Visibility mode is disabled.
When the timer expires, the status changes to
Visibility off failed . Repeat this step to turn off
Bluetooth visibility.
PIN Authentication in Pairing
For the security of your radio, Bluetooth Pairing PIN feature is designed to enable your radio to verify the 149
English
150
English correct device to pair before initiating the pairing.
Authentic PIN is used for the verification.
Note:
The compare PIN authentication method is only applicable for Bluetooth version 2.1 and above.
Pairing the Authentication PIN when Receiving a
Pairing Request
1 When the radio display shows <Device Friendly
Name> pair request , perform one of the following actions:
• To accept, press the Menu Select button below Ok .
• To reject, press the Menu Select button below
Cncl .
Your radio only supports HSP, DUN, PAN and
SPP Bluetooth profiles.
When the pairing timer expires, the display shows
<Device Friendly Name> pair canceled and return to
Home screen.
If you choose to accept the pairing process, the display shows Compare PIN: XXXXXX .
If you choose to reject the pairing process, the display shows Cancel pairing in progress...
followed by <Device Friendly Name> pair canceled and return to Home screen.
2 Perform one of the following actions when the display shows Compare PIN: XXXXXX .:
• Press the Menu Select button below Ok if the
PIN is correct.
• Press the Menu Select button below Cncl to reject if the PIN number is incorrect. The display shows Cancel pairing in progress...
followed by <Device Friendly Name> pair canceled and return to Home screen.
When the PIN authentication timer expires, the display shows <Device Friendly Name>pair canceled and return to Home screen.
If successful, the display shows Pairing in progress....
, <Device Friendly Name> paired followed by <Device Friendly Name>connected .
If unsuccessful, one of the following scenarios will occur:
• The display shows <Device Friendly Name> pair failed (if the pairing timer expires).
• The display shows <Device Friendly Name> connect failed (if the connecting timer expires).
If the PIN is correct but the profiles are not supported, the display shows BT profiles not supported . The display returns to Home screen.
Pairing the Authentication PIN with the Generated
Numeric PIN
Follow the procedure in Searching and Pairing the
Bluetooth Device on page 147 to search for available
Bluetooth devices. Start pairing with the
Authentication PIN by following the steps described next.
1 or to the required device. Press the Menu
Select button directly below Sel to initiate pairing.
Your radio only supports HSP, DUN, PAN and
SPP Bluetooth profiles.
If successful, the display shows Pairing in progress...
followed by a randomly generated numeric PIN, Compare PIN: XXXXXX .
If unsuccessful, the display shows BT profiles not supported . The display returns to Available Dev screen.
2 Press Ok to continue pairing the radio and the device.
The pairing process can be canceled by pressing the Menu Select button below Cncl .
If successful, the display shows Pairing in progress , <Device Friendly Name> paired , Connecting in progress...
followed by <Device Friendly
Name>connected . The display returns to the
Bluetooth feature screen.
If unsuccessful, one of the following scenarios will occur:
• The display shows <Device Friendly Name> pair failed (if the PIN numbers are different).
• <Device Friendly Name> connect failed (if the connection fails).
The display returns to Available Dev screen.
Pairing the Authentication PIN by Manually
Keying in the Same PIN
Follow the procedure in
Bluetooth Device on page 147 to search for available
Bluetooth devices. Start pairing with the
151
English
152
English
Authentication PIN by following the steps described next.
1 or to the required device. Press the Menu
Select button directly below Sel to initiate pairing.
Your radio only supports HSP, DUN, PAN and
SPP Bluetooth profiles.
If successful, the display shows Pairing in progress...
followed by a request for PIN number. A blinking cursor appears below the Enter PIN: .
If unsuccessful, the display shows BT profiles not supported . The display returns to Available Dev screen.
2 Use the keypad to enter the PIN. Press to move one space to the left. Press to move one space to the right. Press the Menu Select button directly below Del to delete.
3 Press Ok to continue pairing the radio and the device. Enter the same PIN number on the device.
The pairing process can be canceled by pressing the Menu Select button below Cncl .
If successful, the display shows Pairing in progress , <Device Friendly Name> paired , Connecting in progress...
followed by <Device Friendly
Name>connected . The display returns to the
Bluetooth feature screen.
If unsuccessful, one of the following scenarios will occur:
• The display shows <Device Friendly Name> PIN auth fail (if the PIN numbers are different).
• <Device Friendly Name> connect failed (if the connection fails).
The display returns to Available Dev screen.
Turning On the Bluetooth Audio (Routing the Audio from the Radio to the Headset)
The following methods are options on how to turn on the Bluetooth audio. The result of all the methods is the same. You can use the options interchangeably depending on your preference and the programmed functions.
• Turning on the Bluetooth audio via radio menu BT :
a) or to
BT . Press the Menu Select button directly below BT to access the Bluetooth feature screen.
b) or to Bluetooth spkr and press the Menu
Select button directly below On .
The display shows On .
c) To return to the Home screen, press the Menu
Select button directly below Exit .
• Turning on the Bluetooth audio via the preprogrammed button: a) To route the audio routing from the radio to the headset, short press the preprogrammed button.
You hear a short, medium-pitched tone. The display shows Headset on .
Turning Off the Bluetooth Audio (Routing the Audio from the Headset to the Radio)
The following methods are options on how to turn off the Bluetooth Audio. The result of all the methods is the same. You can use the options interchangeably depending on your preference and the programmed functions.
• Turning off the Bluetooth audio via radio menu BT : a) or to
BT . Press the Menu Select button directly below BT to access the Bluetooth feature screen.
b) or to Bluetooth spkr and press the Menu
Select button directly below Off .
The display shows Off .
c) To return to the Home screen, press the Menu
Select button directly below Exit .
• Turning off the Bluetooth audio via the preprogrammed button: a) To route the audio routing from the headset to the radio, press the preprogrammed button.
You hear a short, medium-pitched tone. The display shows Speaker on .
Adjusting the Volume of the Radio from Bluetooth
Audio Device
Ensure that the Bluetooth audio device is connected to the radio.
Your radio can only control the volume of MCW and
OCW Bluetooth enabled audio device. If the radio is paired with other Bluetooth enabled audio device, its volume is independent from the APX radio. In this case, the volume is only adjustable on the device.
153
English
154
Adjust volume up/down on the Bluetooth audio device.
The radio display shows Volume XX , and you hear a short, medium-pitched tone.
Viewing and Clearing the Bluetooth Device Information
1
or to BT . Press the Menu Select button directly below BT to access the Bluetooth feature screen.
2 or to Devices .
Once the display highlights the Devices , the display shows XX connected alternates with XX paired .
3 Press the Menu Select button directly below Sel .
4 If there are devices being paired or connected, or along the list of <Device Friendly Name> to see the status of each device.
If there are no active Bluetooth devices being paired or connected, the display shows No devices .
5 Perform one of the following actions:
• To clear the device from the list, or to the required device, press the Menu Select button directly below Clr .
English
• To exit from this function, press the Menu
Select button directly below Back to return to the previous screen without deleting the device name.
If Clr is selected, the display shows <Device
Friendly Name> clear?
.
6 Press the Menu Select button directly below Yes or No to proceed delete the device or to exit this function and return to previous screen.
If the device is deleted successfully, the display shows <Device Friendly Name> cleared to indicate clearing is successful.
If the device is not deleted successfully, you hear the radio sounds a short, low-pitched tone. The display shows <Device Friendly Name> clear failed . The display returns to previous screen.
Note:
If Re-Pair Timer is set to infinite and you clear keys on the radio, you must clear keys on all previously paired devices as well. (Please see your accessories manual for further details.)
Clearing All Bluetooth Devices Information
The following methods are options on how to clear all
Bluetooth devices information. The result of all the methods is the same. You can use the options interchangeably depending on your preference and the programmed functions.
• Clearing all Bluetooth devices information via the preprogrammed Bluetooth On/Off button: a) Long press the preprogrammed Bluetooth
On/Off button.
You hear a short, medium-pitched tone. The display shows Please wait to indicate clearing is in progress.
If successful, the display shows All BT devices cleared .
If unsuccessful, you hear the radio sounds a short, low-pitched tone. The display shows
Clear all BT devices failed . The display returns to
Bluetooth feature screen.
• Clearing all Bluetooth devices information via the radio menu Clr : a) or to Devices and press the Menu Select button directly below Clr .
You hear a short, medium-pitched tone. The display shows Clear all BT devices?
.
b) Press the Menu Select button directly below
Yes to proceed.
The display shows Please wait to indicate clearing is in progress.
If successful, the display shows All BT devices cleared .
If unsuccessful, you hear the radio sounds a short, low-pitched tone. The display shows
Clear all BT devices failed . The display returns to
Bluetooth feature screen.
Note:
If Re-Pair Timer is set to infinite and you clear keys on the radio, you must clear keys on all previously paired devices as well. (Please see your accessories manual for further details.)
Editing the Bluetooth Friendly Name
Your radio must be preprogrammed to allow you to use this feature.
155
English
156
1
or to BT . Press the Menu Select button directly below BT to access the Bluetooth feature screen.
2 or to Friendly name and press the Menu
Select button directly below Edit .
A blinking cursor appears in the Friendly Name screen.
3 Use the keypad to edit the text.
4 Perform one of the following actions:
• Press the Menu Select button directly below
Ok to save the new Friendly Name and return to the Bluetooth feature screen.
• Press the Menu Select button directly below
Cncl to return to the Bluetooth feature screen.
Over-the-Air Programming (POP 25, ASTRO
25, ASTRO Conventional)
This feature enables configuration data and firmware to be upgraded to your radio over-the-air. Full use of the radio is retained during the data transfer without interrupting communication. For ASTRO 25 and
ASTRO Conventional, the upgrade pauses to give priorities to voice call, and continues after the voice call ended. For Wi-Fi
®
, the upgrade process runs concurrently with voice calls.
Once a configuration upgrade is downloaded to your radio, you can install new changes immediately or delay changes to be installed on the radio when it is being powered up.
Your radio can also be configured to allow you to accept or reject an upgrade.
Note:
This feature must be preprogrammed by a qualified radio technician. Check with your dealer or system administrator for more information.
Responding to the Notification of Upgrade
1 The display shows Upgrade?
and two short, medium- pitched tones sounds every 30 seconds until the user makes a choice of accepting, delaying, or rejecting the request
2 Perform one of the following actions:
• Press the Menu Select button below Acpt to accept the request to upgrade immediately.
English
• Press the Menu Select button below Dlay to delay the request to upgrade.
• Press the Menu Select button below Rej to reject the request to upgrade.
One of the following scenarios occurs:
• If you choose to accept, the display shows
Programming Dont power off to indicate the upgrade is about to begin. The radio resets to install the upgrade. In the case of configuration data upgrade, this process only takes a few seconds. In the case of firmware upgrade, the installation takes several minutes.
Note:
The radio cannot be used while the upgrade is being installed. Therefore, make sure to only accept the upgrade at a convenient time when immediate radio use is not required.
• If you choose to delay, a configuration data upgrade is installed automatically at the next power up. However, in the case of a firmware upgrade, the radio prompts Upgrade?
again at the next power up.
• If you choose to reject, the display shows Upg
Aborted . The radio continues to function with the current configuration until it gets reprogrammed.
Note:
If your radio has problems upgrading over-theair, consult a qualified technician for details.
Voice Announcement
This feature enables the radio to audibly indicate the current feature mode, zone or channel the user has just assigned. This audio indicator can be customized per customer requirements. This is typically useful when the user is in a difficult condition to read the content shown on the display.
Each voice announcement is within a limit of three seconds maximum. The sum duration of all different voice announcements in a radio shall be no more than 1000 seconds.
Note:
This feature must be preprogrammed by a qualified radio technician.
Check with your agent if Voice Announcement is available for the feature you need.
157
English
158
English
The two options of priority for the Voice
Announcement available are:
High Enables the voice of the feature to announce even when the radio is receiving calls.
Low Disables the voice of the feature from announcing when the radio is receiving calls.
You hear a voice announcement when the features below are preprogrammed in the radio.
• The radio powers up. The radio announces the current zone and channel it is transmitting.
• Press the preprogrammed voice announcement button (which specifically programmed to playback the current zone and channel). The radio announces the current zone and channel it is transmitting.
Note:
Pressing this preprogrammed playback button enables the voice feature to announce in High priority.
All the three programmable buttons at the side of the radio support this feature.
• Change to a new zone. The radio announces the current zone and channel it is transmitting.
• Change to a new channel remaining within the current zone. The radio announces the current channel.
• Press either the Menu Select button or preprogrammed button or switch of the radio to launch or terminate Scan, PL Disabled,
Talkaround/Direct or Transmit Inhibit. The radio announces the corresponding feature activation or deactivation.
Site Selectable Alerts (ASTRO 25)
A Site Selectable Alert (SSA) is an Intelligent Lighting indicator together with audio alert sent to radios at a site or a few sites to notify the users when there is a special situation that they need to be aware of. Only authorized radios are enabled to send SSA.
Upon the activation of a SSA, the receiving radios display the alert alias and generate the periodic alert tone.
Note:
Alert alias, alert tone, and alert period can be preprogrammed. Alert period is the duration for the radio to repeat the alert tone. An interval of 5 seconds might impact the battery
life of the radio. Check with your dealer or system administrator for more details.
When mixing SSA with received voice audio, the SSA alert is reduced in volume to ensure that the voice message is still heard clearly.
Therefore, it is important that the SSA audio files are created with clear loud audio to ensure they can still be heard clearly when played at reduced levels.
Sending SSA Notification to Single Site
1
or to SSA .
2 Press the Menu Select button directly below SSA .
The display shows the Site Alert screen.
3 or to Start Alert and press the Menu Select button directly below Sel .
The display shows the Select Site screen.
4 or to the desired Site Alias. Press the Menu
Select button directly below Sel .
The display shows the Select Alert screen.
5 or to select the desired Alert Alias and press the Menu Select button directly below Send .
The display shows Sending req .
If radio is out of range, roaming to a foreign system or in a failsoft situation, the display shows
Req failed .
If the request is successful, the display shows Req successful .
If the site is not available, the display shows <Site
Alias> not available .
If the site does not exist, the display shows <Site
Alias> does not exist .
6 To return to the Home screen, press the Menu
Select button directly below Exit .
If you are at the site designated to receive this alert, you can hear an alert tone repeated periodically. The display shows the <Alert Alias> with the intelligent lighting at Home screen.
Sending SSA Notification to Single Site Via Manual
Entry
1
or to SSA .
2 Press the Menu Select button directly below SSA .
159
English
160
English
The display shows the Site Alert screen.
3 or to Start Alert and press the Menu Select button directly below Sel .
The display shows the Select Site screen.
4 or to [SiteID Entry] to send alert via manual entry. Press the Menu Select button directly below Edit .
The display shows the Enter SiteID screen.
5 Key in the desired Site ID and press the Menu
Select button directly below Ok .
If a correct Site ID is entered, the display shows the Select Alert screen.
If a wrong Site ID is entered, the display shows
Invalid ID and prompts to enter the Site ID again.
6 or to select the desired Alert Alias and press the Menu Select button directly below Send .
The display shows Sending req .
If radio is out of range, roaming to a foreign system or in a failsoft situation, the display shows
Req failed .
If the request is successful, the display shows Req successful .
If the site is not available, the display shows <Site
ID> not available .
If the site does not exist, the display shows <Site
ID>does not exist .
7 To return to the Home screen, press the Menu
Select button directly below Exit .
If you are at the site designated to receive this alert, you can hear an alert tone repeated periodically. The display shows the <Alert Alias> with the intelligent lighting at Home screen.
Sending SSA Notification to All Sites
1
or to SSA .
2 Press the Menu Select button directly below SSA .
The display shows the Site Alert screen.
3 or to Start Alert and press the Menu Select button directly below Sel .
The display shows the Select Site screen.
4 or to [All Sites] and press the Menu Select button directly below Sel .
The display shows the Select Alert screen.
5 or to select the desired Alert Alias and press the Menu Select button directly below Send .
The display shows Sending req .
If radio is out of range, roaming to a foreign system or in a failsoft situation, the display shows
Req failed .
If the request is successful, the display shows Req successful .
If one or more sites are not available, the display shows Not all sites available . Repeat 3 .
6 To return to the Home screen, press the Menu
Select button directly below Exit .
If you are at the site designated to receive this alert, you can hear an alert tone repeated periodically. The display shows the <Alert Alias> with the intelligent lighting at Home screen.
Sending SSA Notification to All Available Sites
1
or to SSA .
2 Press the Menu Select button directly below SSA .
The display shows the Site Alert screen.
3 or to Start Alert and press the Menu Select button directly below Sel .
The display shows the Select Site screen.
4 or to [All Avail] and press the Menu Select button directly below Sel .
The display shows the Select Alert screen.
5 or to select the desired Alert Alias and press the Menu Select button directly below Send .
The display shows Sending req .
If radio is out of range, roaming to a foreign system or in a failsoft situation, the display shows
Req failed .
If the request is successful, the display shows Req successful .
6 To return to the Home screen, press the Menu
Select button directly below Exit .
161
English
162
If you are at the site designated to receive this alert, you can hear an alert tone repeated periodically. The display shows the <Alert Alias> with the intelligent lighting at Home screen.
Stopping SSA Notification of a Single Site
1
or to SSA .
2 Press the Menu Select button directly below SSA .
The display shows the Site Alert screen.
3 or to Stop Alert and press the Menu Select button directly below Sel .
The display shows the Select Site screen.
4 or to select the desired Site Alias and press the Menu Select button directly below Send .
The display shows Sending req .
If radio is out of range, roaming to a foreign system or in a failsoft situation, the display shows
Req failed .
If the request is successful, the display shows Req successful .
If the site is not available, the display shows <Site
Alias> not available .
If the site does not exist, the display shows <Site
Alias>does not exist .
5 To return to the Home screen, press the Menu
Select button directly below Exit .
The SSA Alert for the designated site stops.
Stopping SSA Notification of a Single Site Via Manual
Entry
1
or to SSA .
2 Press the Menu Select button directly below SSA .
The display shows the Site Alert screen.
3 or to Stop Alert and press the Menu Select button directly below Sel .
The display shows the Select Site screen.
4 or to [SiteID Entry] and press the Menu
Select button directly below Edit .
The display shows the Enter SiteID screen.
5 Key in the required Site ID and press the Menu
Select button directly below Send .
One of the following scenarios occur:
English
• If a wrong Site ID is entered, the display shows
Invalid ID and prompts to enter the Site ID again.
• If a correct Site ID is entered, the display shows Sending req .
• If the request is successful, the display shows
Req successful .
• If the single site is not available, the display shows <Site ID> not available .
• If the single site does not exist, the display shows <Site ID> does not exist .
6 To return to the Home screen, press the Menu
Select button directly below Exit .
The SSA Alert for the designated site stops.
Stopping SSA Notification of All Sites
1
or to SSA .
2 Press the Menu Select button directly below SSA .
The display shows the Site Alert screen.
3 or to Stop Alert and press the Menu Select button directly below Sel .
The display shows the Select Site screen.
4 or to [All Sites] and press the Menu Select button directly below Send .
The display shows Sending req .
If radio is out of range, roaming to a foreign system or in a failsoft situation, the display shows
Req failed .
If the request is successful, the display shows Req successful .
If one or more sites are not available, the display shows Not all sites available
5 To return to the Home screen, press the Menu
Select button directly below Exit .
The SSA Alert for all sites stop.
Stopping SSA Notification of All Available Sites
1
or to SSA .
2 Press the Menu Select button directly below SSA .
The display shows the Site Alert screen.
3 or to Stop Alert and press the Menu Select button directly below Sel .
163
English
The display shows the Select Site screen.
4 or to [All Avail] and press the Menu Select button directly below Send .
The display shows Sending req .
If radio is out of range, roaming to a foreign system or in a failsoft situation, the display shows
Req failed .
If the request is successful, the display shows Req successful .
5 To return to the Home screen, press the Menu
Select button directly below Exit .
The SSA Alert for all available sites stop.
164
Wi-Fi
This feature allows you to turn Wi-Fi ® on or off. Wi-Fi can be used for wireless programming of the radio with the Radio Management tool.
Note:
Wi-Fi Network Name (SSID) for the radio to connect to must be preprogrammed by a qualified radio technician. Check with your dealer or system administrator for more information
Turning Wi-Fi On or Off
The following methods are options on how to turn Wi-
Fi
®
on or off. The result of all the methods is the same. You can use the options interchangeably depending on your preference and the programmed functions.
• Turning Wi-Fi on or off via the preprogrammed button: a) To toggle the Wi-Fi on or off, press the preprogrammed Wi-Fi button.
This button must be preprogrammed by a qualified radio technician. Check with your dealer or system administrator for more information.
• Turning Wi-Fi on or off via the radio menu button: a) or to
WiFi and press the Menu Select button directly below WiFi .
• If the display shows WiFi Status being Off , press the Menu Select button directly below On .
English
• If the display shows WiFi Status as Searching,
Connecting, Connected or No Service , press the
Menu Select button directly below Off to turn
Wi-Fi off.
Checking the Wi-Fi Configuration and Status of the
Radio
1 Perform one of the following actions:
•
• Long press the preprogrammed Wi-Fi button.
or to WiFi and press the Menu Select button directly below WiFi .
The display shows the current status of the Wi-Fi ® as described next.
Searching Looking for available Wi-Fi networks that have been preprogrammed into the radio.
Connecting In the process of connecting to a found Wi-Fi network.
Connected Connected to one of the preprogrammed Wi-Fi networks.
No Service No available networks or connection with one of the networks failed.
If the radio is Wi-Fi connected, you see a Wi-Fi signal strength indicator, on the front display.
In addition, the WiFi menu shows Connected under the connection Status heading, what network you are connected to under the Network heading, and the signal strength to that network under the Sig
Strength heading.
2 Press to exit.
Utilities
Viewing Recent Calls
This feature allows you to view the recent incoming and outgoing call information of the following call types:
• Call Alert
• Selective Call
• Private Call
• Phone Call (Outgoing Only)
165
English
166
English
•
• Emergency Call (Incoming Only)
Note:
The radio can also be preprogrammed to log only the radio IDs associated with incoming
Dispatch Calls. Check with your dealer or system administrator for more information.
The following methods are options on how to view recent calls. The result of all the methods is the same.
You can use the options interchangeably depending on your preference and the programmed functions.
• Viewing recent calls via the preprogrammed
Recent Calls button: a) Press the preprogrammed Recent Calls button.
b) or to scroll through the list.
c) To return to the Home screen, press the Menu
Select button directly below Exit , press or the PTT button.
Viewing recent calls via the radio menu: a) or to
Rcnt .
b) Press the Menu Select button directly below
Rcnt to access the Recent Calls feature screen.
c) or button.
to scroll through the list.
d) To return to the Home screen, press the Menu
Select button directly below Exit , or the PTT
The radio automatically exits the feature, if the feature inactivity timer is enabled, when the radio is left idle and the timer expires. You will hear the Menu Inactive
Exit Tone upon feature exit.
Using the Flip Display
This feature allows you to flip the content of the top display upside down. It is particularly useful when you would like to read the top display while the radio is still in the carry holder attached to your belt.
To flip the display, press and hold the preprogrammed Light/Flip button
Selecting a Basic Zone Bank
The Basic Zone Select feature must to be preprogrammed to the 3-position A-B-C switch, while the Basic Zone Bank feature must be preprogrammed to any side button or Top (Orange) button before you can use this feature.
This feature allows twice as many zones to be accessed from a switch, doubling the amount of switch positions.
Use the preprogrammed Basic Zone Bank button to toggle the position between Bank 1 and Bank 2.
The top display shows the status icons ( A , B , C , D ,
E or F ) or the zone name based on the bank and switch position selected.
Note:
See the
Zone Bank 2 icons for more information on
the status icons.
Selecting an Enhanced Zone Bank
This feature is created in order to allow users to communicate in more zones. An Enhanced Zone
Bank (EZB) consists of three zones. This also means each icon A , B , C , ... or Y consist of three zones. You can use the preprogrammed 3-position A-B-C switch to select the first, second or third zone in an EZB.
This feature allows user to navigate from up to 75 zones in 25 EZBs.
Note:
The Zone Select feature must to be preprogrammed to the 3-position A-B-C switch, while the Enhanced Zone Bank feature must be preprogrammed to any side button or
Top (Orange) button before you can use this feature.
1 Press the preprogrammed EZB Up or EZB Down button to scroll the EZB up or down or press and hold the preprogrammed EZB Up or EZB Down button to fast scroll the EZB up or down.
2 Turn the 3-Position A/B/C Switch to select the first, second or third zone in the selected EZB.
Selecting the Power Level
Note:
This feature must be preprogrammed by a qualified radio technician.
This feature enables you to reduce the transmit power level for specific case that requires a lower power level. You can select the power level at which your radio transmits. The radio always turns on to the default setting. These reduced transmit power level settings do not affect the receiving performance of
167
English
168
English your radio, nor diminish the overall quality of the audio and data functionality of the radio given the following conditions.
Power level Low enables a shorter transmitting distance and to conserve power. Power level High enables a longer transmitting distance.
The following methods are options on how to select the power level. The result of all the methods is the same. You can use the options interchangeably depending on your preference and the programmed functions.
• Selecting the Power Level via the Transmit
Power Level switch: a) Use the preprogrammed Transmit Power
Level switch to toggle the power level between low and high power.
• Selecting the Power Level via the radio menu: a) or to
Pwr .
b) Press the Menu Select button directly below
Pwr .
The display shows Low power and the low power icon or the display shows High power and the high power icon.
Selecting a Radio Profile
This feature allows you to manually switch the visual and audio settings of the radio. The display, backlight, alert tones, and audio settings are defined according to the preprogrammed radio settings of each radio profile.
Please refer to a qualified technician for more information.
Note:
The radio automatically exits the feature, if the feature inactivity timer is enabled, when the radio is left idle and the timer expires. You will hear the Menu Inactive Exit Tone upon feature exit.
The following methods are options on how to select a radio profile. The result of all the methods is the same. You can use the options interchangeably depending on your preference and the programmed functions.
• Selecting a radio profile via the preprogrammed
Profile button: a) Press the preprogrammed Profile button.
b) or to scroll through the menu selections.
c) Press the Menu Select button directly below
Sel to select the required radio profile, or press the Menu Select button directly below Exit to exit the screen without making any changes.
The radio returns to the Home screen. The profile name on the Home screen indicates the current selected radio profile.
• Selecting a radio profile via the radio menu: a) or to
Prfl and press the Menu Select button directly below Prfl to access the Profiles feature screen.
b) or to scroll through the menu selections.
c) Press the Menu Select button directly below
Sel to select the required radio profile, or press the Menu Select button directly below Exit to exit the screen without making any changes.
The radio returns to the Home screen. The profile name on the Home screen indicates the current selected radio profile.
Enabling and Disabling the Radio Alias
This feature allows you to display or hide the radio alias (name).
Press the Menu Select button directly below
MyID .
The display shows momentary Radio ID off , and the radio alias disappears from the Home screen or the display shows momentary Radio ID on , and the radio alias appears on the Home screen.
Controlling the Display Backlight
You can enable or disable the radio’s display backlight as needed, if poor light conditions make the display or keypad difficult to read.
Depending on how your radio is preprogrammed, you can also maintain a minimum backlight level on the radio's front display.
Note:
The backlight setting also affects the Menu
Select buttons, the Navigation button and the
keypad backlighting accordingly.
169
English
170
The backlight remains on for a preprogrammed time before it automatically turns off completely or returns to the minimum backlight level.
Perform one of the following actions:
• To toggle the backlight on or off, press the preprogrammed Light/Flip button.
• To turn the backlight on, press any key of the
keypad, the Menu Select or Navigation button, or any programmable radio controls or buttons.
Turning the Controls and Keypad Buttons Tones On or
Off
•
You can enable and disable the tones of Navigation buttons, controls and keypad if needed.
Turning the tones on or off via the preprogrammed
Mute button: a) To turn the tones off or on, press the preprogrammed Mute button.
Locking and Unlocking the Keypad and Controls
You can lock the keypad, programmable buttons, rotary knobs, and switches of your radio to avoid inadvertent entry. Check with your dealer or qualified technician for best selection to suit your usage.
1 Toggle the preprogrammed Keypad/Control Lock button or switch to on.
The display shows Kypd/Ctrl Lock .
2 Toggle again to unlock the controls.
• Turning the tones on or off via the radio menu: a) or to
Mute .
b) Press the Menu Select button directly below
Mute .
The display shows momentary Tones off , indicating that the tones are disabled or the display shows momentary Tones on , and you hear a short tone indicating that the tones are enabled.
Turning Voice Mute On or Off
You can enable and disable voice transmission, if needed.
The following methods are options on how to turn
Voice Mute on or off. The result of all the methods is
English
the same. You can use the options interchangeably depending on your preference and the programmed functions.
• Turning Voice Mute off or on via the preprogrammed Voice Mute button: a) To turn the feature off or on, press the preprogrammed Voice Mute button.
• Turning Voice Mute on or off via the radio menu: a) or to
VMut .
b) Press the Menu Select button directly below
VMut .
The display shows momentary Voice mute off , and you hear a short tone, indicating that the feature is disabled or the display shows momentary Voice mute on , and you hear a short tone, indicating that the feature is enabled.
Using the Time-Out Timer
This feature turns off the transmitter of your radio.
You cannot transmit longer than the preset timer setting.
If you attempt to do so, the radio automatically stops your transmission, and you hear a talk-prohibit tone.
The timer is defaulted at 60 seconds, but it can be preprogrammed from 3 to 120 seconds, in 15-second intervals, or it can be disabled entirely for each radio mode, by a qualified radio technician.
Note:
You hear a brief, low-pitched, warning tone four seconds before the transmission times out.
1 Hold down the PTT button longer than the preprogrammed time.
You hear a short, low-pitched warning tone, the transmission is cut-off, and the LED goes out until you release the PTT button.
2 Release the PTT button.
The timer resets.
3 To re-transmit, press the PTT button.
The time-out timer restarts and the LED lights up solid red.
Time and Date Setup
You can set the time and date for your radio.
Settings:
171
English
172
English
• The default time setting is a 12-hour clock. The display shows 12:00AM .
• The AM/PM selection is not available for the 24hour clock setting.
• The default setting for the domestic date shows
MDY .
Note:
Check with your dealer or system administrator for additional programmable settings for this feature.
Editing the Time and Date
1
or to Clck .
2 Press the Menu Select button directly below Clck .
The display shows the current setting of the radio.
3 Press the Menu Select button directly below Edit .
The first item blinks.
4 Perform one of the following actions:
•
• or to change the selected item.
or one or more times to move to an item you wish to change. or to change the selected item.
• Press the Menu Select button directly below
Exit to exit the screen without making any changes and return to the Home screen.
5 Perform one of the following actions:
• Press the Menu Select button directly below
Ok once you have finished to save your changes and return to the Home screen.
• Press the Menu Select button directly below
Cncl to discard all changes and return to the
Home screen.
Press at any time to return to the Home screen without saving your changes.
Note:
If a call arrives while the radio is in the clock-setting menu, the radio exits clock setting and displays the call information.
Any changes made before the call is not saved.
Using Conventional Squelch Operation Features
This feature filters out unwanted calls with low signal strength or channels that have a higher than normal background noise.
Analog Options
Tone Private Line (PL), Digital Private-Line (DPL), and carrier squelch can be available
(preprogrammed) per channel.
Mode
Carrier squelch (C)
PL or DPL
Result
You hear all traffic on a channel.
The radio responds only to your messages.
Digital Options
One or more of the following options may be preprogrammed in your radio. Check with your dealer or system administrator for more information.
Option
Digital Carrier-Operated
Squelch (COS)
Normal Squelch
Result
You hear any digital traffic.
You hear any digital traffic having the correct network access code.
Option
Selective Switch
Result
You hear any digital traffic having the correct network access code and correct talkgroup.
Using the PL Defeat Feature
This feature allows you to override any coded squelch
(DPL or PL) that might be preprogrammed to a channel. The radio also unmutes to any digital activity on a digital channel.
Place the preprogrammed PL Defeat switch in the
PL Defeat position.
One of the following scenarios occurs:
• You hear any activity on the channel.
• The radio is muted if no activity is present.
Note:
When this feature is active, the Carrier
Squelch status indicator is displayed.
Digital PTT ID Support
This feature allows you to see the radio ID (number) of the radio from whom you are currently receiving a 173
English
transmission. This ID, consisting up to a maximum of eight characters, can be viewed by both the receiving radio and the dispatcher.
The ID number of your radio is also automatically sent every time the PTT button is pressed. This is a perchannel feature. For digital voice transmissions, the
ID of your radio is sent continuously during the voice message.
Smart PTT Feature (Conventional Only)
Smart PTT is a per-personality, programmable feature used in conventional radio systems to keep radio users from talking over other radio conversations.
When smart PTT is enabled in your radio, you cannot transmit on an active channel.
If you try to transmit on an active smart-PTT channel, you hear an alert tone, and the transmission is inhibited. The LED lights up solid yellow to indicate that the channel is busy.
The following table shows the variations of smart
PTT:
174
English
Mode
Transmit Inhibit on Busy Channel with Carrier
Description
You cannot transmit if any traffic is detected on the channel.
Transmit Inhibit on Busy Channel with Wrong
Squelch Code
You cannot transmit on an active channel with a squelch code or (if secure-equipped) encryption key other than your own. If the PL code is the same as yours, the transmission is not prevented.
Quick-Key Override
Your radio must be preprogrammed to allow you to use Quick-
Key Override. This feature can work in conjunction with either of the two above variations. You can override the transmit-inhibit state by quick-keying the radio. In other words, two PTT button presses within the preprogrammed time limit.
Transmit Inhibit
This feature is available for APCO 25 trunking, Type II trunking and Conventional operations for all APX radios.
When Transmit Inhibit feature is enabled, the radio stops all transmission including voice and data. The radio could receive messages but not replying the acknowledgement request of the received message.
User could physically control the transmission of the radio especially during operation in hazardous environments with this feature. An environment is considered hazardous when the power emitted by the radio power amplifier could initiate an explosion or other dangerous reactions.
When the Transmit Inhibit feature is disabled, the radio functions according to its normal operations.
The radio sounds alert tone when user enters or exits this feature and also when PTT is pressed.
Note:
Acknowledgement of any messages required from the radio is not transmitted if the Transmit
Inhibition is enabled.
Enabling Transmit Inhibition
Perform one of the following actions:
•
• Switch the preprogrammed Transmit Inhibit switch to Transmit Inhibit enabled.
or to TxIn below TxIn .
. Press the Menu Select button
• Press the Transmit Inhibit programmable button.
Note:
If the user has disabled TX Inhibit via the menu and then moves the switch to the position where TX Inhibit is enabled, the new value overwrites the menu value.
The display shows Tx inhibit on . You hear a sequence of short, low high tones to indicate transmission is inhibited.
Pressing PTT triggers the radio sounds a constant short, low pitched tone (reject tone).
Note:
The status of the Transmit Inhibit does not change after the radio powers up.
175
English
176
Disabling Transmit Inhibition
Perform one of the following actions:
•
• Switch the preprogrammed Transmit Inhibit switch to Transmit Inhibit disabled position.
or to TxIn below TxIn .
. Press the Menu Select button
• Press the Transmit Inhibit programmable button.
Note:
If the user has disabled TX Inhibit via the softkey and then moves the switch to the position where TX Inhibit is enabled, the new value overwrites the menu value.
The display shows Tx inhibit off . You hear a sequence of short, high low tone (Transmit Inhibit
Off tone) to indicate transmission is back to normal operation.
IMPRES Battery Annunciator
This feature displays the current capacity and charges cycles of your battery when an IMPRES ™
Battery is powering your radio. This feature must be enabled in your radio to see the information.
The information shown are:
Charge
Percentage
Remaining
Capacity
Estimated
Charges
Percentage of current battery capacity.
Remaining power of the battery in mAh.
Number of charges cycles the battery has gone through.
Accessing the Battery Info screen
1
or to Batt .
2 Press the Menu Select button directly below
The display shows the details of the battery.
3 To return to the Home screen, press the Menu
Select button directly below Exit .
General Radio Information
Your radio contains information on the following:
• Radio Information
• IP Display
• Control Assignments
• Soft ID (If enabled)
Batt .
English
Note:
The radio automatically exits the feature, if the feature inactivity timer is enabled, when the radio is left idle and the timer expires. You hear the Menu Inactive Exit Tone upon feature exit.
Accessing the Radio Information
This feature displays the following radio information:
• Host Version
• Secure Version
• Model Number
• ESN
• Flash Code
• Tuning Version
• Option Board Type (optional)
• Option Board Bluetooth Address (optional)
• Expansion Board Type (optional)
• DSP Version
• KG (Secure Algorithm)
• Serial Number
• Flash Size & Type
• RF Band(s)
• Processor Version
• Option Board Serial Number (optional)
• Option Board Software Version (optional)
• Language Pack ID and Version (only when the language of the display is set to non-English)
Note:
To return to the Home screen, press at any time.
1 Perform one of the following actions:
•
• Press the preprogrammed Info button.
or to Info and press the Menu Select button directly below Info .
2 or to Radio Info and press the Menu Select button directly below Sel .
The display shows the Information screen.
3 Perform one of the following actions:
• or to scroll through the various information.
• To return to the previous screen, press the
Menu Select button directly below Back .
•
Press to return to the Home screen .
177
English
178
English
Viewing the IP Information
This feature displays the device name, IP address, and status of your radio.
Note:
The device name of your radio is preprogrammed. Check with your dealer or system administrator for more information.
1 Perform one of the following actions:
•
• Press the preprogrammed Info button.
or to Info and press the Menu Select button directly below Info .
2 or to IP Info and press the Menu Select button directly below Sel .
The display shows the IP Info screen.
3 Perform one of the following actions:
• or to scroll through the various information.
• Press the Menu Select button directly below
Back to return to the previous screen.
•
Press to return to the Home screen.
Viewing the Control Assignments
This feature displays the programmable radio functions assigned to the controls of your radio for the currently selected channel.
on page 29 for more information on the various programmable features of your radio.
1 Perform one of the following actions:
•
• Press the preprogrammed Info button.
or to Info and press the Menu Select button directly below Info .
2 or to Control map and press the Menu
Select button directly below Sel .
The display shows the Control Map screen.
3 Perform one of the following actions:
• or to scroll through the various information.
• Press the Menu Select button directly below
Back to return to the previous screen.
•
Press to return to the Home screen.
Editing the Soft ID
Your radio must be preprogrammed to allow you to use this feature.
This feature allows you to change your username.
1 Perform one of the following actions:
•
• Press the preprogrammed Info button.
or to Info and press the Menu Select button directly below Info .
2 or to Soft ID and press the Menu Select button directly below Sel .
The display shows the current Soft ID.
3 Perform one of the following actions:
• Press the Menu Select button directly below
Edit to edit the current Soft ID.
• Press the Menu Select button directly below
Back to return to the previous screen.
A blinking cursor appears in the Edit Soft ID screen.
4 Use the keypad to edit the text.
5 Perform one of the following actions:
• Press the Menu Select button directly below
Ok to save the new Soft ID and return to the previous screen.
• Press the Menu Select button directly below
Cncl to return to the previous screen.
179
English
Helpful Tips
Radio Care
Caution:
• Your radio casting has a vent port that allows for pressure equalization in the radio. Never poke this vent with any objects, such as needles, tweezers, or screwdrivers.This could create leak paths into the radio and the radio’s submergibility will be lost.
A
180
English
• (For APX 6000/APX 6000Li R Radios Only)
Your radio is designed to be submerged to a maximum depth of 6 feet, with a maximum submersion time of 2 hours.
Exceeding either maximum limit may result in damage to the radio.
• (For APX 6000/APX 6000Li R Radios Only)
Elastomer technology materials used for seals in rugged portable radios can age with time and environmental exposure.
Therefore, Motorola recommends that rugged radios be checked annually as a preventive measure in order to assure the watertight integrity of the radio. Motorola details the disassembly, test, and reassembly procedures along with necessary test equipment needed to inspect, maintain and troubleshoot radio seals in the radio’s service manual.
• If the radio battery contact area has been submerged in water, dry and clean the radio battery contacts before attaching a battery to the radio. Otherwise, the water could short-circuit the radio.
• If the radio has been submerged in water, shake the radio well so that any water that may be trapped inside the speaker grille and microphone port can be removed.
Otherwise, the water will decrease the audio quality of the radio.
• Do not disassemble the radio. This could damage radio seals and result in leak paths into the radio. Any radio maintenance should be performed only by a qualified radio technician.
Cleaning Your Radio
Caution:
Do not use solvents to clean your radio as most chemicals may permanently damage the radio housing and textures.
Do not submerge the radio in the detergent solution.
To clean the external surfaces of your radio, follow the procedure described next.
1 Combine one teaspoon of mild dishwashing detergent to one gallon of water (0.5% solution).
2 Apply the solution sparingly with a stiff, nonmetallic, shortbristled brush, making sure excess detergent does not get entrapped near the connectors, controls or crevices. Dry the radio thoroughly with a soft, lint-free cloth.
3 Clean battery contacts with a lint-free cloth to remove dirt or grease.
Proper Ways to Handle the Radio
• Do not pound, drop, or throw the radio unnecessarily. Never carry the radio by the antenna.
• Avoid subjecting the radio to an excess of liquids.
Do not submerge the radio unless it is ruggedized.
(APX 6000/APX 6000Li R model)
• Avoid subjecting the radio to corrosives, solvents or chemicals.
• Do not disassemble the radio.
• Caution:
Do not use the radio without an accessory connector or a dust cover in place as contamination can build up on the contacts.
• When charging the radio using a wall mounted charger, the radio must be turned off. Otherwise, the Man Down Alert and Emergency may be accidentally triggered.
181
English
Radio Service and Repair
Proper repair and maintenance procedures will assure efficient operation and long life for this product. A Motorola maintenance agreement will provide expert service to keep this and all other communication equipment in perfect operating condition. A nationwide service organization is provided by Motorola to support maintenance services. Through its maintenance and installation program, Motorola makes available the finest service to those desiring reliable, continuous communications on a contract basis. For a contract service agreement, please contact your nearest Motorola service or sales representative, or an authorized Motorola dealer.
Battery Care
182
Battery Charge Status
Your radio can indicate the battery’s charge status through:
• the LED and sounds.
• the fuel gauge icon on the display.
You can also check the battery charge status via the menu entry. See
on page 176 for more information.
English
LED and Sounds
When your battery is low:
• the LED blinks red when the PTT button is pressed.
• you hear a low-battery “chirp” (short, high-pitched tone).
Fuel Gauge Icons
A blinking fuel gauge icon ( ) is displayed only when the battery voltage drops to low level. In this case, replace the battery with a fully charged one.
Gauge Battery Charge
76% to 100% full [3]
Top Display:
51% to 75%
[3]
Gauge
Top Display:
Battery Charge
26% to 50%
[3]
Top Display:
11% to 25%
[3]
Top Display:
3
These are for IMPRES
™
battery operation only.
Gauge
Top Display:
Battery Charge
10% or less (at 10%, the gauge begins blinking)
Battery Recycling and Disposal
In the U.S. and Canada, Motorola participates in the nationwide Rechargeable Battery Recycling
Corporation (RBRC) program for battery collection and recycling. Many retailers and dealers participate in this program.
For the location of the drop-off facility closest to you, access RBRC's Internet web site at www.rbrc.com
or call 1-800-8-BATTERY. This internet site and telephone number also provide other useful
183
English
184
English information concerning recycling options for consumers, businesses, and governmental agencies.
Accessories
The accessory link below is for APX radios. Not all accessories are FCC certified to operate with all APX models and/or bandsplits. Please refer to the specific
APX radio price pages for a list of FCC certified accessories or contact your sales representative for accessory compatibility.
http://www.motorolasolutions.com/APX
Note:
GPS only antenna is only used in either a single band UHF or 700/800 application where the Public Safety Microphone (PSM) is used with the corresponding PSM antenna. This antenna is only for GPS reception and cannot be used for receive/transmit operation at UHF,
VHF or 700/800. This antenna is never to be used on the PSM.
185
English
Maritime Radio Use in the VHF
Frequency Range
Special Channel Assignments
186
Emergency Channel
If you are in imminent and grave danger at sea and require emergency assistance, use VHF Channel 16 to send a distress call to nearby vessels and the
United States Coast Guard. Transmit the following information, in this order:
1 “MAYDAY, MAYDAY, MAYDAY.”
2 “THIS IS _____________________, CALL SIGN
__________.” State the name of the vessel in distress 3 times, followed by the call sign or other identification of the vessel, stated 3 times.
3 Repeat “MAYDAY” and the name of the vessel.
4 “WE ARE LOCATED AT
_______________________.” State the position of the vessel in distress, using any information that will help responders to locate you, e.g.:
• latitude and longitude
• bearing (state whether you are using true or magnetic north)
• distance to a well-known landmark
• vessel course, speed or destination
5 State the nature of the distress.
6 Specify what kind of assistance you need.
7 State the number of persons on board and the number needing medical attention, if any.
8 Mention any other information that would be helpful to responders, such as type of vessel, vessel length and/or tonnage, hull color, etc.
9 “OVER.”
10 Wait for a response.
11 If you do not receive an immediate response, remain by the radio and repeat the transmission at intervals until you receive a response. Be prepared to follow any instructions given to you.
Non-Commercial Call Channel
For non-commercial transmissions, such as fishing reports, rendezvous arrangements, repair scheduling, or berthing information, use VHF Channel 9.
Operating Frequency Requirements
A radio designated for shipboard use must comply with Federal Communications Commission Rule Part
80 as follows:
English
• on ships subject to Part II of Title III of the
Communications Act, the radio must be capable of operating on the 156.800 MHz frequency.
• on ships subject to the Safety Convention, the radio must be capable of operating:
• in the simplex mode on the ship station transmitting frequencies specified in the
156.025 – 157.425 MHz frequency band, and
• in the semiduplex mode on the two frequency channels specified in the table below.
Note:
Simplex channels 3, 21, 23, 61, 64, 81, 82, and 83 cannot be lawfully used by the general public in US waters.
Additional information about operating requirements in the Maritime Services can be obtained from the full text of FCC Rule Part 80 and from the US Coast Guard.
Table 1: VHF Marine Channel List
Channel Number
Frequency (MHz)
Transmit Receive
10
11
12
13**
6
7
8
9
14
15**
16
17**
*
4
5
1
2
156.050
156.100
156.150
156.200
156.250
156.300
156.350
156.400
156.450
156.500
156.550
156.600
156.650
156.700
156.750
156.800
156.850
160.650
160.700
160.750
160.800
160.850
–
160.950
–
156.450
156.500
156.550
156.600
156.650
156.700
156.750
156.800
156.850
187
English
188
English
27
28
60
*
*
24
25
26
62
63
*
65
18
19
20
*
22
156.900
156.950
157.000
157.050
157.100
157.150
157.200
157.250
157.300
157.350
157.400
156.025
156.075
156.125
156.175
156.225
156.275
161.500
161.550
161.600
161.650
161.700
161.750
161.800
161.850
161.900
161.950
162.000
160.625
160.675
160.725
160.775
160.825
160.875
76
77**
78
79
72
73
74
75
80
*
*
*
66
67**
68
69
71
156.325
156.375
156.425
156.475
156.575
156.625
156.675
156.725
***
***
156.875
156.925
156.975
157.025
157.075
157.125
157.175
160.925
156.375
156.425
156.475
156.575
–
156.675
156.725
***
***
–
161.525
161.575
161.625
161.675
161.725
161.775
84
85
86
87
88
157.225
157.275
157.325
157.375
157.425
161.825
161.875
161.925
161.975
162.025
Note:
* Simplex channels 3, 21, 23, 61, 64, 81, 82, and 83 cannot be lawfully used by the general public in US waters.
** Low power (1 W) only.
*** Guard band.
Note:
A – in the Receive column indicates that the channel is transmit only.
Declaration of Compliance for the Use of
Distress and Safety Frequencies
The radio equipment does not employ a modulation other than the internationally adopted modulation for maritime use when it operates on the distress and safety frequencies specified in RSS-182 Section 7.3.
Technical Parameters for Interfacing External
Data Sources
Input Voltage (Volts
Peak-topeak)
RS232
18V
Max Data
Rate
28 kb/s
Impedance 5000 ohm
USB
3.6V
12 Mb/s
90 ohm
SB9600
5V
9.6 kb/s
120 ohm
189
English
190
Glossary
This glossary is a list of specialized terms used in this manual.
ACK
Active Channel
Analog Signal
ARS
ASTRO 25
ASTRO
Conventional
Autoscan
Bluetooth
Acknowledgment of communication.
A channel that has traffic on it.
An RF signal that has a continuous nature rather than a pulsed or discrete nature.
Automatic Registration Service
Motorola standard for wireless digital trunked communications.
Motorola standard for wireless digital conventional communications.
A feature that allows the radio to automatically scan the members of a scan list.
Bluetooth is an open wireless technology standard for exchanging data over short
English distances from fixed and mobile devices with high levels of security.
Bluetooth Pairing Bluetooth pairing occurs when two bluetooth devices exchanged a passkey to form a paired Bluetooth wireless connection.
Call Alert Privately page an individual by sending an audible tone.
Carrier Squelch Feature that responds to the presence of an RF carrier by opening or unmuting (turning on) a receiver’s audio circuit. A squelch circuit silences the radio when no signal is being received so that the user does not have to listen to “noise”.
Central Controller A software-controlled, computer-driven device that receives and generates data for the trunked radios assigned to it. It monitors and directs the
Channel operations of the trunked repeaters.
A group of characteristics such as transmit/ receive frequency pairs, radio parameters, and encryption encoding.
Control Channel In a trunking system, one of the channels that is used to provide a continuous, two-way/ data communications path between the central controller and all radios on the system.
Conventional Typically refers to radio-to-radio communications, sometimes through a repeater (see
Trunking).
Conventional
Scan List
COTS
Cursor
A scan list that includes only conventional channels.
Commercial Off-The-Shelf
A visual tracking marker (a blinking line) that indicates a location on the display.
Deadlock
Digital Private
Line (DPL)
Digital Signal
Dispatcher
DSP
Dynamic
Regrouping
DSR
EID
Displayed by the radio after three failed attempts to unlock the radio. The radio must be powered off and on prior to another attempt.
A type of coded squelch using data bursts. Similar to PL except a digital code is used instead of a tone.
An RF signal that has a pulsed, or discrete, nature, rather than a continuous nature.
An individual who has radio system management duties.
Digital Signal Processing
A feature that allows the dispatcher to temporarily reassign selected radios to a single special channel so they can communicate with each other.
Dynamic System Resilience
Encrypted Integrated Data 191
English
192
English
ESN
Failsoft
FCC
FM
Hang Up
Home screen
IV&D
KVL
LCD
LED
Electrical Serial Number
A feature that allows communications to take place even though the central controller has failed. Each trunked repeater in the system transmits a data word informing every radio that the system has gone into failsoft.
Federal Communications
Commission.
Frequency Modulation
Disconnect.
The first display information after the radio completes its self test.
Integrated Voice and Data
Key-variable loader: A device for loading encryption keys into the radio.
Liquid crystal display.
Light-emitting diode.
Li-Ion
Man Down
MCW
MDC
Menu Entry
Monitor
Lithium ion.
A life-saving feature that senses the radio user may be in trouble by monitoring the whether the radio is in a vertical or horizontal position or whether the radio is motionless.
When this feature is triggered, the radio alerts the user with audio and visual alerts. It can also trigger Emergency Alarm the Post-Alert Timer is not cancelled.
Mission Critical Wireless
Motorola Data Communication
A software-activated feature shown at the bottom of the display – selection of these features is controlled by the
, , and buttons.
Check channel activity by pressing the Monitor button. If the channel is clear, you hear
Multi-System
Talkgroup Scan
List
Network Access
Code
NiMH
Non-Tactical/
Revert
OCW
OTAR static. If the channel is in use, you hear conversation. It also serves as a way to check the volume level of the radio, since the radio “opens the squelch” when the monitor button is pressed.
A scan list that can include both talkgroups (trunked) and channels (conventional).
Network Access Code (NAC) operates on digital channels to reduce voice channel interference between adjacent systems and sites.
Nickel-metal-hydride.
The user talks on a preprogrammed emergency channel. The emergency alarm is sent out on this same channel.
Operation Critical Wireless
Over-the-air rekeying.
Page
Personality
PIN
PremierOne
A one-way alert, with audio and/or display messages.
A set of unique features specific to a radio.
Personal Identification Number
A software application which streamlines critical real time operations and simplifies system administration to deliver accurate, consistent and integrated information remotely to the requestors.
Preprogrammed Refers to a software feature that has been activated by a qualified radio technician.
Private
(Conversation)
Call
A feature that lets you have a private conversation with another radio user in the talkgroup.
Private Line (PL) A sub-audible tone that is transmitted such that only receivers decoding the tone receives it.
193
English
194
English
Programmable
PTT
Radio Frequency
(RF)
Repeater
Selective Call
Refers to a radio control that can have a radio feature assigned to it.
Push-To-Talk. The PTT button engages the transmitter and puts the radio in transmit (send) operation when pressed.
The part of the general frequency spectrum between the audio and infrared light regions (about 10 kHz to
10,000,000 MHz).
A conventional radio feature, where you talk through a receive/transmit facility that retransmits received signals, in order to improve communications range and coverage.
A feature that allows you to call a selected individual, intended to provide privacy and to eliminate the annoyance of having to listen to
Selective Switch Any digital P25 traffic having the correct Network Access
Code and the correct talkgroup.
Squelch conversations of no interest to you.
Special electronic circuitry, added to the receiver of a radio, that reduces, or cuts off, unwanted signals before they are heard in the speaker.
SSI
Standby
Synchronous Serial Interface
An operating condition whereby the radio’s speaker is muted but still continues to receive data.
Status Calls
Tactical/ Non-
Revert
Pre-defined text messages that allow the user to send a conditional message without talking.
The user talks on the channel that was selected before the radio entered the emergency state.
Talkaround
Talkgroup
Bypass a repeater and talk directly to another unit for easy local unit-to-unit communications.
An organization or group of radio users who communicate with each other using the same communication path.
Text Messaging Service TMS
Trunking The automatic sharing of communications paths between a large number of users (see
Conventional).
Trunking Priority
Monitor Scan List
A scan list that includes talkgroups that are all from the same trunking system.
USK
UTC
Unique Shadow Key.
Coordinated Universal Time.
The international time standard
(formerly Greenwich Mean
Time, or GMT). Zero hours
UTC is midnight in Greenwich,
England, which is located at 0
Zone degrees longitude. Everything east of Greenwich (up to 180 degrees) is later in time; everything west is earlier.
There are 42 time authorities around the world that are constantly synchronizing with each other. Abbreviated as
UTC (English backronym =
Universal Time, Coordinated), it is also known as Zulu (Z) Time.
A grouping of channels.
195
English
196
Limited Warranty
MOTOROLA COMMUNICATION PRODUCTS
I. WHAT THIS WARRANTY COVERS AND FOR
HOW LONG:
MOTOROLA SOLUTIONS, INC. (“MOTOROLA”) warrants the MOTOROLA manufactured
Communication Products listed below (“Product”) against defects in material and workmanship under normal use and service for a period of time from the date of purchase as scheduled below:
ASTRO APX 6000/APX
6000Li Portable Units
Product Accessories
One (1) Year
One (1) Year
MOTOROLA, at its option, will at no charge either repair the Product (with new or reconditioned parts), replace it (with a new or reconditioned Product), or refund the purchase price of the Product during the warranty period provided it is returned in accordance with the terms of this warranty. Replaced parts or boards are warranted for the balance of the original
English applicable warranty period. All replaced parts of
Product shall become the property of MOTOROLA.
This express limited warranty is extended by
MOTOROLA to the original end user purchaser only and is not assignable or transferable to any other party. This is the complete warranty for the Product manufactured by MOTOROLA. MOTOROLA assumes no obligations or liability for additions or modifications to this warranty unless made in writing and signed by an officer of MOTOROLA.
Unless made in a separate agreement between
MOTOROLA and the original end user purchaser,
MOTOROLA does not warrant the installation, maintenance or service of the Product.
MOTOROLA cannot be responsible in any way for any ancillary equipment not furnished by MOTOROLA which is attached to or used in connection with the
Product, or for operation of the Product with any ancillary equipment, and all such equipment is expressly excluded from this warranty. Because each system which may use the Product is unique,
MOTOROLA disclaims liability for range, coverage, or operation of the system as a whole under this warranty.
MOTOROLA offers the following optional extended service contracts.
SERVICE FROM THE START (SfS)
COMPREHENSIVE
Provides for extended hardware repair coverage
INCLUDING CHEMICAL, LIQUID, FIRE, AND
OTHER PHYSICAL DAMAGE. Comprehensive coverage is available in conjunction with
MOTOROLA’S standard Commercial Warranty and starts from the FIRST DAY the radio is put into use.
Service performed under this plan consists of repair or replacement of the covered equipment as set forth in the terms and conditions. Repairs will be made only at the designated MOTOROLA repair depot. Local services are not included. MOTOROLA will pay the inbound shipping charges only with use of the
MOTOROLA designated delivery service.
MOTOROLA will pay for outbound shipping via
MOTOROLA'S normal shipping methods.
SERVICE FROM THE START (SfS) LITE
Provides extended hardware normal wear and tear repair coverage beginning AFTER MOTOROLA’S standard Commercial Warranty period expires.
Service performed under this plan consists of repair of the covered equipment as set forth in the terms and conditions. Repairs will be made only at the designated MOTOROLA repair depot. Local services are not included. MOTOROLA will pay for outbound shipping via MOTOROLA'S normal shipping methods.
II. GENERAL PROVISIONS:
This warranty sets forth the full extent of
MOTOROLA'S responsibilities regarding the Product.
Repair, replacement or refund of the purchase price, at MOTOROLA’s option, is the exclusive remedy.
THIS WARRANTY IS GIVEN IN LIEU OF ALL
OTHER EXPRESS WARRANTIES. IMPLIED
WARRANTIES, INCLUDING WITHOUT LIMITATION,
IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED TO THE DURATION OF THIS
LIMITED WARRANTY. IN NO EVENT SHALL
MOTOROLA BE LIABLE FOR DAMAGES IN
EXCESS OF THE PURCHASE PRICE OF THE
PRODUCT, FOR ANY LOSS OF USE, LOSS OF
TIME, INCONVENIENCE, COMMERCIAL LOSS,
LOST PROFITS OR SAVINGS OR OTHER
INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OR
INABILITY TO USE SUCH PRODUCT, TO THE
197
English
FULL EXTENT SUCH MAY BE DISCLAIMED BY
LAW.
III. STATE LAW RIGHTS:
SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LIMITATION ON
HOW LONG AN IMPLIED WARRANTY LASTS, SO
THE ABOVE LIMITATION OR EXCLUSIONS MAY
NOT APPLY.
This warranty gives specific legal rights, and there may be other rights which may vary from state to state.
198
IV. HOW TO GET WARRANTY SERVICE:
You must provide proof of purchase (bearing the date of purchase and Product item serial number) in order to receive warranty service and, also, deliver or send the Product item, transportation and insurance prepaid, to an authorized warranty service location.
Warranty service will be provided by MOTOROLA through one of its authorized warranty service locations. If you first contact the company which sold you the Product (e.g., dealer or communication service provider), it can facilitate your obtaining warranty service. You can also call MOTOROLA at
1-800-927-2744 US/Canada.
V. WHAT THIS WARRANTY DOES NOT
COVER:
1 Defects or damage resulting from use of the
Product in other than its normal and customary manner.
2 Defects or damage from misuse, accident, water, or neglect.
3 Defects or damage from improper testing, operation, maintenance, installation, alteration, modification, or adjustment.
4 Breakage or damage to antennas unless caused directly by defects in material workmanship.
5 A Product subjected to unauthorized Product modifications, disassembles or repairs (including, without limitation, the addition to the Product of non-MOTOROLA supplied equipment) which adversely affect performance of the Product or interfere with MOTOROLA's normal warranty inspection and testing of the Product to verify any warranty claim.
6 Product which has had the serial number removed or made illegible.
English
7 Rechargeable batteries if:
• any of the seals on the battery enclosure of cells are broken or show evidence of tampering.
• the damage or defect is caused by charging or using the battery in equipment or service other than the Product for which it is specified.
8 Freight costs to the repair depot.
9 A Product which, due to illegal or unauthorized alteration of the software/firmware in the Product, does not function in accordance with
MOTOROLA’s published specifications or the FCC certification labeling in effect for the Product at the time the Product was initially distributed from
MOTOROLA.
10 Scratches or other cosmetic damage to Product surfaces that does not affect the operation of the
Product.
11 Normal and customary wear and tear.
VI. PATENT AND SOFTWARE PROVISIONS:
MOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a United States patent, and MOTOROLA will pay those costs and damages finally awarded against the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following:
1 that MOTOROLA will be notified promptly in writing by such purchaser of any notice of such claim,
2 that MOTOROLA will have sole control of the defense of such suit and all negotiations for its settlement or compromise, and
3 should the Product or parts become, or in
MOTOROLA’s opinion be likely to become, the subject of a claim of infringement of a United
States patent, that such purchaser will permit
MOTOROLA, at its option and expense, either to procure for such purchaser the right to continue using the Product or parts or to replace or modify the same so that it becomes non-infringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or parts as established by MOTOROLA.
MOTOROLA will have no liability with respect to any claim of patent infringement which is based upon the
199
English
200
English combination of the Product or parts furnished hereunder with software, apparatus or devices not furnished by MOTOROLA, nor will MOTOROLA have any liability for the use of ancillary equipment or software not furnished by MOTOROLA which is attached to or used in connection with the Product.
The foregoing states the entire liability of
MOTOROLA with respect to infringement of patents by the Product or any parts thereof.
Laws in the United States and other countries preserve for MOTOROLA certain exclusive rights for copyrighted MOTOROLA software such as the exclusive rights to reproduce in copies and distribute copies of such MOTOROLA software. MOTOROLA software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modified in any way, or used to produce any derivative thereof. No other use including, without limitation, alteration, modification, reproduction, distribution, or reverse engineering of such
MOTOROLA software or exercise of rights in such
MOTOROLA software is permitted. No license is granted by implication, estoppel or otherwise under
MOTOROLA patent rights or copyrights.
VII. GOVERNING LAW:
This Warranty is governed by the laws of the State of
Illinois, U.S.A.
VIII. For Australia Only
This warranty is given by Motorola Solutions Australia
Pty Limited (ABN 16 004 742 312) of Tally Ho
Business Park, 10 Wesley Court. Burwood East,
Victoria.
Our goods come with guarantees that cannot be excluded under the Australia Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Motorola Solutions Australia’s limited warranty above is in addition to any rights and remedies you may have under the Australian Consumer Law. If you have any queries, please call Motorola Solutions Australia at 1800 457 439. You may also visit our website: http://www.motorolasolutions.com/XA-EN/Pages/
Contact_Us for the most updated warranty terms.
APX6000_M3_BackCover_HalfLetter_P299C.fm Page 2 Monday, November 3, 2014 5:20 PM
Motorola Solutions, Inc.
1303 East Algonquin Road
Schaumburg, Illinois 60196 U.S.A.
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license.
All other trademarks are the property of their respective owners. ©
2010 – 201 6 Motorola Solutions, Inc. All rights reserved.
Feb 201 6
*68012001079*
68012001079-J C
advertisement
Related manuals
advertisement
Table of contents
- 3 Contents
- 11 Declaration of Conformity
- 13 Important Safety Information
- 14 Software Version
- 14 Notice to Users (FCC and Industry Canada)
- 15 Consignes de sécurité importantes
- 16 Version logicielle
- 16 Avis aux utilisateurs (FCC et Industrie Canada)
- 17 Computer Software Copyrights
- 18 Documentation Copyrights
- 19 Disclaimer
- 20 Getting Started
- 20 How to Use This Guide
- 20 Notations Used in This Manual
- 20 Additional Performance Enhancement
- 21 ASTRO 25 Enhanced Data
- 21 Dynamic System Resilience (DSR)
- 21 CrossTalk Prevention
- 21 Encrypted Integrated Data (EID)
- 21 SecureNet
- 21 Conventional Talkgroup and Radio Scan Enhancements
- 22 What Your Dealer/System Administrator Can Tell You
- 23 Preparing Your Radio for Use
- 23 Charging the Battery
- 23 Attaching the Battery
- 24 Attaching the Antenna
- 25 Removing and Attaching the Accessory Connector Cover
- 26 Using the Carry Holder
- 28 Turning On the Radio
- 29 Adjusting the Volume
- 30 Identifying Radio Controls
- 30 Radio Parts and Controls
- 31 Programmable Features
- 32 Assignable Radio Functions
- 35 Assignable Settings or Utility Functions
- 36 Accessing the Preprogrammed Functions
- 36 Menu Select Buttons
- 37 Home Button
- 37 4-Way Navigation Button
- 37 Data Feature Button
- 37 Keypad
- 38 Keypad Characters – Uppercase Mode
- 39 Keypad Characters – Lowercase Mode
- 40 Keypad Characters – Numeric Mode
- 41 Keypad Characters – Hexadecimal Mode
- 42 Push-To-Talk (PTT) Button
- 43 Identifying Status Indicators
- 43 Status Icons
- 47 Text Messaging Service (TMS) Indicators
- 48 TMS Status Icons
- 49 TMS Menu Options
- 49 Call Type Icons
- 50 LED Indicator
- 51 Intelligent Lighting Indicators
- 52 Alert Tones
- 56 Phone Call Displays and Alerts
- 58 General Radio Operation
- 58 Selecting a Zone
- 58 Selecting a Radio Channel
- 59 Selecting a Channel via Channel Search Button
- 60 Mode Select Feature
- 60 Saving a Zone and a Channel to a Softkey
- 61 Saving a Zone and a Channel to a Button
- 61 Receiving and Responding to a Radio Call
- 61 Receiving and Responding to a Talkgroup Call
- 62 Receiving and Responding to a Private Call (Trunking Only)
- 63 Receiving and Responding to a Telephone Call (Trunking Only)
- 63 Methods to Make a Radio Call
- 64 Making a Talkgroup Call
- 64 Making a Private Call (Trunking Only)
- 65 Making an Enhanced Private Call (Trunking Only)
- 66 Making a Telephone Call (Trunking Only)
- 67 Switching Between Repeater or Direct Operation Button
- 67 Monitor Feature
- 67 Monitoring a Channel
- 68 Monitoring Conventional Mode
- 69 Advanced Features
- 69 Advanced Call Features
- 69 Selective Call (ASTRO Conventional Only)
- 69 Receiving a Selective Call
- 69 Making a Selective Call
- 70 Talkgroup Call Feature (Conventional Operation Only)
- 70 Selecting a Talkgroup
- 71 Sending a Status Call
- 71 Responding to the Dynamic Regrouping Feature (Trunking Only)
- 72 Requesting a Reprogram (Trunking Only)
- 72 Classification of Regrouped Radios
- 73 Dynamic Zone Programming (DZP)
- 73 Entering the Dynamic Zone to Select a Dynamic Channel
- 74 Saving a Channel in the Dynamic Zone from List Selection
- 74 Saving a Channel in the Dynamic Zone from Channel Name
- 75 Deleting a Channel in the Dynamic Zone
- 75 Contacts
- 76 Making a Private Call from Contacts
- 77 Adding a New Contact Entry
- 78 Deleting a Contact Entry
- 78 Adding a Contact to a Call List
- 79 Removing a Contact from a Call List
- 79 Methods of Contact Editing in a Call List
- 79 Editing an Entry Alias
- 80 Editing as Entry ID
- 80 Editing a Call Type
- 81 Viewing Details of a Contact
- 81 Scan Lists
- 81 Viewing a Scan List
- 81 Editing the Scan List
- 82 Changing the Scan List Status
- 83 Viewing and Changing the Priority Status
- 83 Scan
- 84 Turning Scan On or Off
- 84 Making a Dynamic Priority Change (Conventional Scan Only)
- 84 Deleting a Nuisance Channel
- 85 Restoring a Nuisance Channel
- 85 Call Alert Paging
- 85 Receiving a Call Alert Page
- 85 Sending a Call Alert Page
- 87 Quick Call II (ASTRO P25 Digital Trunking and Conventional)
- 88 Initiating a Quick Call II Transmission
- 88 Emergency Operation
- 89 Sending an Emergency Alarm
- 90 Sending an Emergency Call (Trunking Only)
- 90 Sending an Emergency Alarm with Emergency Call
- 91 Sending a Silent Emergency Alarm
- 91 Change of Channels during Emergency
- 92 Emergency Keep-Alive Feature
- 92 Emergency Find Me
- 92 Sending and Receiving Emergency Find Me Beacon
- 93 Fireground (Conventional Only)
- 93 Entering Fireground Zone Channel
- 94 Responding to Evacuation Indicator
- 95 Tactical Public Safety (TPS) (Conventional Only)
- 95 Using TPS Normal Transmission
- 95 Using TPS Emergency Transmission
- 96 Man Down
- 97 Pre-Alert Timer
- 97 Post-Alert Timer
- 98 Radio Alerts When Man Down Feature is Triggered
- 98 Triggering Emergency
- 98 Radio Alerts When Man Down Enhanced is Triggered
- 99 Exiting Man Down Feature
- 99 Re-Initiating Man Down
- 100 Testing the Man Down Feature
- 100 Automatic Registration Service (ARS)
- 100 Selecting or Changing the ARS Mode
- 101 User Login Feature
- 101 Logging In as a User
- 102 Logging Out
- 103 Text Messaging Service (TMS)
- 104 Accessing the Messaging Features
- 104 Composing and Sending a New Text Message
- 105 Sending a Quick Text Message
- 107 Priority Status and Request Reply of a New Text Message
- 107 Appending a Priority Status to a Text Message
- 107 Removing a Priority Status from a Text Message
- 108 Appending a Request Reply to a Text Message
- 108 Removing a Request Reply from a Text Message
- 108 Appending a Priority Status and a Reply Request to a Text Message
- 108 Removing a Priority Status and a Reply Request from a Text Message
- 109 Receiving a Text Message
- 109 Viewing a Text Message from the Inbox
- 110 Replying to a Received Text Message
- 111 Accessing the Drafts Folder
- 112 Sent Text Messages
- 112 Viewing a Sent Text Message
- 112 Sending a Sent Text Message
- 113 Deleting a Text Message
- 113 Deleting All Text Messages
- 114 ASTRO 25 Advanced Messaging Solution
- 114 System Setup for ASTRO Advanced Messaging Solution
- 115 Two-Factor Authentication
- 115 Logging in via the Two-Factor Authentication
- 117 Logging out of Two-Factor Authentication
- 117 Sending a Query
- 119 Receiving a Query
- 119 Secure Operations
- 119 Selecting Secure Transmissions
- 120 Selecting Clear Transmissions
- 120 Managing Encryption
- 120 Loading an Encryption Key
- 121 Multikey Feature
- 121 Selecting an Encryption Key
- 122 Selecting a Keyset
- 122 Erasing the Selected Encryption Keys
- 123 Requesting an Over-the-Air Rekey (ASTRO Conventional Only)
- 124 MDC Over-the-Air Rekeying (OTAR) Page
- 124 Infinite UKEK Retention
- 125 Hear Clear
- 125 Security
- 125 Radio Lock
- 126 Unlocking Your Radio
- 126 Changing Your Password
- 127 Changing Your Tactical Inhibit Password
- 127 Enabling or Disabling the Radio Lock Feature (Secure Radios Only)
- 128 Radio Stun and Kill
- 128 Radio Stun
- 128 Using Radio Stun
- 129 Radio Kill
- 129 Using Remote Kill to Kill Another Radio
- 130 Using Direct Kill to Kill Your Own Radio
- 130 Global Positioning System / Global Navigation Satellite System
- 130 GPS Operation
- 131 GPS Performance Enhancement
- 131 The Outdoor Location Feature (Using GPS)
- 132 Military Grid Reference System (MGRS) Coordinates
- 133 Accessing the Outdoor Location Feature
- 133 Saving a Waypoint
- 134 Viewing a Saved Waypoint
- 135 Editing the Alias of a Waypoint
- 135 Editing the Coordinates of a Waypoint
- 136 Deleting a Single Saved Waypoint
- 137 Deleting All Saved Waypoints
- 138 Measuring the Distance and Bearing from a Saved Waypoint
- 138 Location Feature in Emergency Mode
- 138 Peer-Location on the Display (ASTRO Conventional only)
- 139 Geofence (ASTRO 25 Trunking System)
- 140 Entering the Geofence Area
- 141 Trunking System Controls
- 141 Operating in Failsoft System
- 142 Out-of-Range Radio
- 142 Site Trunking Feature
- 142 Locking and Unlocking a Site
- 142 Site Display and Search Button
- 143 Viewing the Current Site
- 143 Changing the Current Site
- 143 Mission Critical Wireless - Bluetooth®-
- 144 Turning On Bluetooth
- 144 Turning Off the Bluetooth
- 145 Re-Pair Timer
- 146 Bluetooth Drop Timer
- 147 Pairing with Low Frequency-Motorola Proximity Pairing (LF-MPP) Feature
- 148 Radio Indications of Lost Bluetooth Connection
- 149 Standard Pairing Feature
- 149 Searching and Pairing the Bluetooth Device
- 150 Turning On Bluetooth Visibility
- 151 Receiving Pairing Request from other Devices
- 151 Turning Off Bluetooth Visibility
- 151 PIN Authentication in Pairing
- 152 Pairing the Authentication PIN when Receiving a Pairing Request
- 153 Pairing the Authentication PIN with the Generated Numeric PIN
- 153 Pairing the Authentication PIN by Manually Keying in the Same PIN
- 154 Turning On the Bluetooth Audio (Routing the Audio from the Radio to the Headset)
- 155 Turning Off the Bluetooth Audio (Routing the Audio from the Headset to the Radio)
- 155 Adjusting the Volume of the Radio from Bluetooth Audio Device
- 156 Viewing and Clearing the Bluetooth Device Information
- 157 Clearing All Bluetooth Devices Information
- 157 Editing the Bluetooth Friendly Name
- 158 Over-the-Air Programming (POP 25, ASTRO 25, ASTRO Conventional)
- 158 Responding to the Notification of Upgrade
- 159 Voice Announcement
- 160 Site Selectable Alerts (ASTRO 25)
- 161 Sending SSA Notification to Single Site
- 161 Sending SSA Notification to Single Site Via Manual Entry
- 162 Sending SSA Notification to All Sites
- 163 Sending SSA Notification to All Available Sites
- 164 Stopping SSA Notification of a Single Site
- 164 Stopping SSA Notification of a Single Site Via Manual Entry
- 165 Stopping SSA Notification of All Sites
- 165 Stopping SSA Notification of All Available Sites
- 166 Wi-Fi
- 166 Turning Wi-Fi On or Off
- 167 Checking the Wi-Fi Configuration and Status of the Radio
- 167 Utilities
- 167 Viewing Recent Calls
- 168 Using the Flip Display
- 168 Selecting a Basic Zone Bank
- 169 Selecting an Enhanced Zone Bank
- 169 Selecting the Power Level
- 170 Selecting a Radio Profile
- 171 Enabling and Disabling the Radio Alias
- 171 Controlling the Display Backlight
- 172 Locking and Unlocking the Keypad and Controls
- 172 Turning the Controls and Keypad Buttons Tones On or Off
- 172 Turning Voice Mute On or Off
- 173 Using the Time-Out Timer
- 173 Time and Date Setup
- 174 Editing the Time and Date
- 174 Using Conventional Squelch Operation Features
- 175 Analog Options
- 175 Digital Options
- 175 Using the PL Defeat Feature
- 175 Digital PTT ID Support
- 176 Smart PTT Feature (Conventional Only)
- 177 Transmit Inhibit
- 177 Enabling Transmit Inhibition
- 178 Disabling Transmit Inhibition
- 178 IMPRES Battery Annunciator
- 178 Accessing the Battery Info screen
- 178 General Radio Information
- 179 Accessing the Radio Information
- 180 Viewing the IP Information
- 180 Viewing the Control Assignments
- 181 Editing the Soft ID
- 182 Helpful Tips
- 182 Radio Care
- 183 Cleaning Your Radio
- 183 Proper Ways to Handle the Radio
- 184 Radio Service and Repair
- 184 Battery Care
- 184 Battery Charge Status
- 184 LED and Sounds
- 184 Fuel Gauge Icons
- 185 Battery Recycling and Disposal
- 187 Accessories
- 188 Maritime Radio Use in the VHF Frequency Range
- 188 Special Channel Assignments
- 188 Emergency Channel
- 188 Non-Commercial Call Channel
- 188 Operating Frequency Requirements
- 191 Declaration of Compliance for the Use of Distress and Safety Frequencies
- 191 Technical Parameters for Interfacing External Data Sources
- 192 Glossary
- 198 Limited Warranty
- 198 MOTOROLA COMMUNICATION PRODUCTS
- 198 I. WHAT THIS WARRANTY COVERS AND FOR HOW LONG:
- 199 II. GENERAL PROVISIONS:
- 200 III. STATE LAW RIGHTS:
- 200 IV. HOW TO GET WARRANTY SERVICE:
- 200 V. WHAT THIS WARRANTY DOES NOT COVER:
- 201 VI. PATENT AND SOFTWARE PROVISIONS:
- 202 VII. GOVERNING LAW:
- 202 VIII. For Australia Only