CONNECTION
COLOR SETTING SETUP
COLOR SETTING SETUP
CONNECTING THE UNIT TO AN EXTERNAL DVD GAME USING THE A/V CABLE (NOT
SHARPNESS
MIO
SHARPNESS
BRIGHTNESS
00
INCLUDED)
BRIGHTNESS
00
CONTRAST
00
CONTRAST
00
GAMMA
NONE
GAMMA
NONE
HUE
00
HUE
00
SATURATION
00
SATURATION
00
LUMA DELAY
1T
LUMA DELAY
1T
HUE
MIO
SATURATION
HUE
SATURATION
0
0
Composite Video (YELLOW)
Right Audio (RED)
Left Audio (WHITE)
HUE
SATURATION
You can set the Hue (for NTSC) to your
liking. Press PLAY/SAVE or the RIGHT
arrow to enter the Hue control, then press
the
UP or
DOWN arrow to adjust the
image. Press the
LEFT arrow to go
back to the menu.
PREFERENCE PAGE
Page 6 of 25 pages
PREFERENCE PAGE
TV TYPE
PAL
PAL
TV TYPE
PAL
PBC
OFF
MULTI
NTSC
PBC
OFF
PARENTAL
DVD
GAME
You can set the Saturation to your liking.
Press PLAY/SAVE or the
RIGHT arrow
to enter the Saturation control, then press
the
UP or
DOWN arrow to adjust the
image. Press the
LEFT arrow to go back
to the menu.
PARENTAL
DEFAULT
DEFAULT
SET TV STANDARO
SET PBC STATE
Select this menu item to set up your
preferred video output format. PAL is
commonly used in Europe and NTSC
is commonly used in the USA and Japan.
Select MULTI only if your TV supports
both formats, the output signal will follow
automatically the video format on the
DVD disc.
ON
OFF
For VCD and SVCD, this selection turns
ON or OFF the Playback Control (PBC)
function. VCD or SVCD media have PBC
menu's that contains the track list. The
default PBC state is set to ON. In OFF
mode, no tracks can be selected.
Page 19 of 25 pages
BASIC OPERATIONS
COLOR SETTING SETUP
COLOR SETTING SETUP
SHARPNESS
MIO
SHARPNESS
MIO
BRIGHTNESS
00
BRIGHTNESS
00
CONTRAST
00
CONTRAST
00
GAMMA
NONE
GAMMA
NONE
HUE
00
HUE
00
SATURATION
00
SATURATION
00
LUMA DELAY
1T
LUMA DELAY
1T
BRIGHTNESS
PAL-NTSC Selection
To set up The Multimedia player according to the connected TFT LCD monitor and video
signal system, to play a DVD or any other video discs, follow these guidelines:
If the TFT LCD monitor is NTSC, press the N/P button on The Multimedia
Player until you see NTSC on your screen.
CONTRAST
You can set the Brightness to your liking.
Press PLAY or the
RIGHT arrow to
enter the brightness control, then press
the
UP or
DOWN arrow to adjust
the image. Press the
LEFT arrow to
go back to the menu.
BRIGHTNESS
You can set the Contrast to your liking.
Press PLAY or the
RIGHT arrow to
enter the brightness control, then press
the
UP or
DOWN arrow to adjust
the image. Press the
LEFT arrow to
go back to the menu.
CONTRAST
0
0
CONTRAST
BRIGHTNESS
COLOR SETTING SETUP
COLOR SETTING SETUP
SHARPNESS
MIO
SHARPNESS
BRIGHTNESS
00
BRIGHTNESS
00
CONTRAST
00
CONTRAST
00
If the TFT LCD monitor is PAL, select PAL by pressing the N/P button on the
Until you see PAL on your screen:
If the TFT LCD monitor supports both PAL and NTSC, select MULTI by Pressing
The N/P button until you see MULTI on your screen.
Disc loading
Load one disc with the label side facing upwards and make sure you do not touch the
data side with your fingers.
Note:
Do not touch the content side of a disc
Do not stick any paper or stickers on a disc.
Do not force the disc in place, it is possible
You damage the disc or the unit itself, if a disc is
not placed correctly on the guides in the disc
tray.
MIO
GAMMA
NONE
HIGH
GAMMA
NONE
HUE
00
MEDIUM
HUE
00
SATURATION
00
LOW
SATURATION
00
LUMA DELAY
1T
NONE
LUMA DELAY
1T
Finger prints and dust on the disc surface can affect the sound and picture quality. Clean the
discs regularly with a soft cotton cloth from the disc center to the outside of the disc. Do not clean
in circular motions.
0T
1T
Do not use any kind of solvent, such as diluting agent, gasoline, liquid detergent, and gasoline l
iquid detergent antistatic aerosol used for vinyl, this may cause serious disc damage.
Keep discs away from direct sunlight or any heat source
GAMMA
LUMA DELAY
Gamma refers to the exponent between
video or pixel values and the displayed
brightness. You can set the Gamma to
these choices and your liking.
Luma Delay You can adjust the luminance
delay by selecting one of these choices to
best suit the brightness of your TV.
Page 18 of 25 pages
The Multimedia player is a precision device. If the optical pick-up lens and disc drive parts
become dirty or worn down, picture quality will become poor. To obtain a clear picture, regular
inspection and maintenance are recommended every 1,000 hours of use, depending on the
operating environment.
Once the disc is loaded, the unit will automatically start reading the disk and it will take
a few seconds to download the disc initial data, thereafter the disc type will be displayed
in the left upper corner of the LCD screen and the unit will start playing the disc.
Page 7 of 25 pages
Pause / Stop / Play
When a disc is playing press the PAUSE button on the remote control or on the
Multimedia player to pause the session. Press the PLAY button on the remote
control or the Multimedia player to resume playing the disc.
3D PROCESSING PAGE
PRO LOGIC II
REVERB MODE
OFF
Press the STOP button once on the remote control or The Multimedia player to
stop playing a disc. The unit will memorize the position on the disk and will continue to
play from that position if the PLAY button on the remote control or The Multimedia
player is pressed.
VIDEO SETUP PAGE
OFF
CONCERT
LIVING ROOM
HALL
BATHROOM
CAVE
ARENA
CHURCH
COLOR SETTING
REVERB MODE
Press STOP STOP twice to completely stop playing a disc. When the PLAY button
on the remote control or the Multimedia player is pressed hereafter, the unit will not
resume playing from the position the disc was interrupted at. Note: The Disc continues to
spin for approximately 4 minutes after pressing the stop button.
Select menu items
In either the disc menu or the setup menu:
(1) Press the /
/
/
GOTO VIDEO SETUP PAGE
Select 3D PROCESSING to set up your
preferred 3D mode. Press PLAY to enter
this selection and to set up your preferred
Audio mode for a better surround effect.
Press PLAY/SAVE or the RIGHT arrow
to enter this selection.
Select this menu item to set up your Video
Quality modes. Press PLAY to enter this
selection.
arrow buttons to move between selectable items.
(2) Press the PLAY button to confirm and/or execute a selection
HDCD SETUP PAGE
FILTER
ADVANCED OPERATION
1X
COLOR SETTING SETUP
OFF
1X
2X
Select a specific on-disc Menu section
When the DVD disc contains an on-disc menu, you can display and access this menu
by pressing either the MENU button on the Remote Control. (Note: PBC must be turned
on.)
(1) Press the MENU button. You will now see the menu of the DVD (if available) and
the selection choices in this menu.
(2) Press one of the arrow buttons to scroll
through the displayed (sub) menu items. Press PLAY to confirm the selection.
(3) Alternatively, use the Number buttons to make a selection. For example: To
select the 13th song, press 10+ then 3
FILTER
SHARPNESS
MIO
HIGH
BRIGHTNESS
00
MEDIUM
CONTRAST
00
LOW
GAMMA
NONE
HUE
00
SATURATION
00
LUMA DELAY
1T
SHARPNESS
Select HDCD to set up your preferred
Audio mode for HDCD. Press PLAY to
enter this selection and to set up your
preferred filter mode for HDCD
(default is 1X).
You can set the picture sharpness to these
choices. If a video image is light, select the
LOW option. If a video image is dark, select
the HIGH option.
1x = 48K Sampling, 2x = 96K Sampling
Audio CD discs, track selection
Load an Audio disc, upon reading the disc, you can select/play songs via the number
buttons. If the track number is lower than 10, press a number button 0 9 to select the
desired track. For example: to select the 8th track, press number button 8. To select track
numbers beyond 10, first press the 10+ button, followed by a single digit number button
0 9 For example: To select the 12th song, press button 10+ and then press button 2.
Page 8 of 25 pages
Page 17 of 25 pages
Fast Forward
AUDIO SETUP PAGE
EQUALIZER PAGE
ANALOG AUDIO SET UP
SOUND MODE
OFF
EQUALIZER
3D PROCESSING
BASS BOOST
SUPER BASS
OFF
OFF
HDCD
TREBLE BOOST
OFF
GOTO AUDIO SETUP PAGE
SELECT EQUALIZER TYPE
Press PLAY to enter the Analog Audio
setup page. The page hereunder will
be shown:
STR
EQUALIZER Select this menu item to
set up your preferred Equalizer mode.
Press PLAY to enter this selection.
You can select one of these preset
Equalizer modes to adjust the audio
signal to your best liking.
ANALOG AUDIO SETUP PAGE
DOWNMIX
OFF
ROCK
POP
LIVE
DANCE
TECHNO
CLASSIC
SOFT
LT/RT
While the video is playing press the Fast Forward FWD
button on either the
Multimedia player or the remote control to play the video in Fast Forward (FFWD)
mode. Five different speeds are available and depend on the number of times this
button is pressed in sequence.
2x
2x
4x
4x
8x
8x
16x
32x
16x
32x
Normal play
Normal play
(DVD)
(Other Discs)
Fast Backward
While the video is playing press the Fast Backward button
REV on either the
Multimedia player R or the remote control to play the video in Fast Backward (FRWD)
mode. Five different speeds are available and depend on the number of times this
button is pressed in sequence.
2x
2x
4x
4x
8x
8x
16x
16x
32x
32x
Normal play
Normal play
(DVD)
(Other Discs)
STEREO
EQUALIZER PAGE
SOUND MODE
OFF
BASS BOOST
SUPER BASS
OFF
OFF
TREBLE BOOST
OFF
Skip to the next chapter or track
ON
OFF
SET DOWNMIX MODE
Set sound mix output mode:
press the
RIGHT arrow to enter the
sub-menu. If you want analog stereo
signals, set the sound mode to
"STEREO",press the
DOWN arrow
once to move the selection to
"STEREO", than press PLAY.
If you want to have Dolby Pro Logic
stereo (the decoded signal will create
a 2ch reality simulating effect via the
R/L connectors), select "LT/RT", then
press PLAY.
Skip to the previous chapter or track
BASS BOOST
EQUALIZER PAGE
SOUND MODE
OFF
BASS BOOST
SUPER BASS
OFF
OFF
TREBLE BOOST
OFF
ON
OFF
There are two options to select a next track.
1) Press either the PREVIOUS
or the NEXT
button as described above.
2) Press one or more of the NUMBER 0 9, 10+ buttons to enter the desired track
number to be played. When the screen is displaying a
then this function is
not available. This might have one of the following reasons: A) The tracks on
the disks are not numbered; B) The entered number is incorrect; C) PBC is on
press the PBC button on the remote control to switch PBC off.
EQUALIZER PAGE
SOUND MODE
OFF
BASS BOOST
SUPER BASS
OFF
OFF
TREBLE BOOST
OFF
When a DVD disc is played, press the PREVIOUS button
on either the remote
control or The Multimedia player to skip to the previous chapter. When other discs
are played, press this button to skip to the previous track. Note: Whether this function
works depends on the disc type in use.
Select a track
SUPER BASS
You can select one of these modes to
adjust the Bass and Treble signal to
your best liking. ON will switch the
selected mode on and OFF will switch
it back to normal Audio playback.
Note: Please be advised that sometimes the BASS on an Audio CD or
DVD is already very low, using the
Bass Boost or Super Bass can overload
your speakers resulting in poor sound
quality.
When a DVD disc is played, press the NEXT button
on either the remote control or
The Multimedia player to skip to the next chapter. When other discs are played,
press this button to skip to the next track. Note: Whether this function works depends
on the disc type in use.
ON
OFF
Display the track list
With PBC switched on and while the DVD disc is played, press MENU to display the
track list. Select a track with the up or down arrow and press PLAY to confirm your
track selection.
TREBLE BOOST
Page 16 of 25 pages
Page 9 of 25 pages
Repeat
While a disc is playing press the REPEAT button to select one of the available repeat
modes.
1) For DVD discs;
a. press REPEAT to repeat a chapter
b. press REPEAT again to repeat a title
When playing a DVD disc and you have
selected ON, then the screen will show
the angle mark. This will give you the
possibility to view multi angle DVD's.
(whether this functions works, depends
on the disc type in use.) When you have
selected OFF, no angle mark will be
shown on the screen.
To select the language for your On Screen
Display (OSD) use this menu item. There
are multiple languages available.
c. press REPEAT again repeat all
d. press REPEAT again to exit the repeat mode.
GENERAL SETUP PAGE
GENERAL SETUP PAGE
TV DISPLAY
PS
TV DISPLAY
PS
2) For non-DVD discs and when PBC is switched off;
ANGLE MARK
OSD LANGUAGE
ON
ENG
ANGLE MARK
OSD LANGUAGE
ON
ENG
CAPTIONS
OFF
ON
CAPTIONS
OFF
a. press REPEAT to repeat a track
SCREEN SAVER
ON
OFF
SCREEN SAVER
ON
LAST MEMORY
ON
LAST MEMORY
ON
ON
OFF
b. press REPEAT again to repeat the whole disc
c. press REPEAT again to exit the repeat mode
CAPTIONS
SCREEN SAVER
Select Subtitle Language
Press the SUBTITLE button to select the caption language e.g. English, Dutch,
Spanish, etc. Press the SUBTITLE button various times until you have selected
the desired language available.
ON: To display captions. (Subtitles)
OFF: Captions will not be displayed.
(No Subtitles)
Note: Whether this function works depends on the disc type in use.
On Screen Display (OSD)
When there is no activity with the Player
for some time, a screen saver will start to
prevent damage to the screen. Select ON
to activate the screen saver function or
select OFF to deactivate this function
GENERAL SETUP PAGE
The DISPLAY button can be pressed on the remote control to check the playing time
and the remaining time for each title/chapter/track. Also, it can display the remaining
time for the whole discs.
For DVD discs
TV DISPLAY
PS
ANGLE MARK
OSD LANGUAGE
ON
ENG
CAPTIONS
OFF
SCREEN SAVER
ON
LAST MEMORY
ON
ON
OFF
Press the DISPLAY button once, the screen will show the elapsed time for the
current title..
TITLE ELAPSED
T: 01/01 C: 02/25
00:06:08
Press the DISPLAY button twice, the screen will show the remaining time for title.
SET LAST MEMORY STATE
ON: Each time when you turn off the player, it will memorize the last play time. So if you
turn on the player the next time and the same disc is played, it will resume play from
the last memory point.
OFF : Disable the last memory function
TITLE REMAIN
T: 01/01 C: 02/25
1:30:08
Page 10 of 25 pages
Page 15 of 25 pages
4:3LB Allow you to see movies in their original aspect
ratio. The entire frame of the movie will be displayed.
16:9 recorded movies will occupy a smaller portion of
the screen and you will see black margins above and
below the picture.
For CD discs
To check for example the remaining time when playing the 2nd song, press the DISPLAY
button. The screen shows TC . This is the current track played.
TC
T:04/10
00:03:08
Press the DISPLAY button twice and the screen will show the remaining time for the
current track.
TR
T:04/10
00:03:08
4:3PS The movie will be shown full screen without any
black margins, but parts of the image will be cut of from
the right and left side.
Press the DISPLAY button for a third time and the screen will show the elapsed time for
the current disc.
Press the DISPLAY button for a 4th time and the screen will show the elapsed time for
the current chapter.
16:9 Allow you to see movies in their original aspect
ratio, when connected to a wide screen TV. The entire
frame of the movie will be displayed.
FM Frequency
Push this button to select the frequency and at the same time the monitor will show you
which frequency you have selected . So you can adjust the frequency on the radio
according to the frequency showed on the monitor.
ZOOM
16:9 Note: depending the DVD screen format (e.g. 2.35
:1), the wide screen setting may still have black margins
above and below the picture.
GENERAL SETUP PAGE
TV DISPLAY
PS
ANGLE MARK
OSD LANGUAGE
ON
ENG
CAPTIONS
OFF
This feature is used to zoom-in and zoom-out the video image of the motion pictures or
still images when playing DVD discs.
There are 3 levels of zoom-in available, pressing the ZOOM button several times to
increase the zoom factor in the following sequence:
GENERAL SETUP PAGE
ON
OFF
TV DISPLAY
PS
ANGLE MARK
OSD LANGUAGE
ON
ENG
CAPTIONS
OFF
ENGLISH
GERMAN
FRENCH
SPANISH
SCREEN SAVER
ON
SCREEN SAVER
ON
ITALIAN
LAST MEMORY
ON
LAST MEMORY
ON
PORTUGUESE
DUTCH
DANISH
SET ANGLE MARK
SET OSD LANGUAGE
Page 14 of 25 pages
Page 11 of 25 pages
Hereafter there are also three levels to zoom-out, press the ZOOM button several times
to decrease the zoom factor in the following sequence:
SYSTEM SETTINGS
Press SETUP on the Remote Control to enter the system setting main menu.
Current item
GENERAL SETUP PAGE
The explanation to
the current item.
Press the /
(Panning).
/
/
TV DISPLAY
Wide
ANGLE MARK
OSD LANGUAGE
CAPTIONS
ON
ENG
OFF
SCREEN SAVER
ON
LAST MEMORY
ON
GOTO GENERAL SETUP PAGE
arrow buttons to move the zoomed picture over your screen
To return to normal screen size, press the ZOOM for the 7th time.
On the Remote Control, press either the
UP or
DOWN or
LEFT or
RIGHT
arrow buttons to move to the desired menu item and press PLAY to select the menu item
Memory Play
The Multimedia player can memorize the last stop point and play form this point
onwards when the unit is switched on again or when play is press again.
When playing, press the STOP button once to stop the playback. The Multimedia player
will memorize the current position on the disc. Press the PLAY button to start
playing from the last memorized position. Pressing the STOP button twice will clear the
memorized position from the memory and if play is resumed, the disc will be played
from the beginning.
GENERAL SETUP PAGE
TV DISPLAY
PS
4:3 PANSCAN
ANGLE MARK
OSD LANGUAGE
ON
ENG
4:3 LETTERBOX
CAPTIONS
OFF
SCREEN SAVER
ON
LAST MEMORY
ON
16:9
SET TV DISPLAY MODE
Slow play:
While playing , push [SLOW] to play film slowly at different speed. You can play slow
forward or backward, four shift speed are available for either of them. Push [SLOW]
once, the speed decreases by one shift , finally it returns to normal state.
Set TV Display mode to the correct ratio:
Press the
RIGHT arrow button to enter the sub-menu. If you want to set the screen
to "WIDE", press the
DOWN arrow twice to move your selection until the "WIDE"
item is selected, now press PLAY.
Press SETUP to exit these system settings
Note: three screen ratio modes are available, 16:9 WIDE, 4:3LB (Letterbox) and 4:3PS
(Pan Scan). Different disc formats will display different images depending this
setting and the screen size used.. Hereunder is an example of the different
choices and the relation between the disc format and screen ratio. of the
different choices and the relation
Page 12 of 25 pages
Page 13 of 25 pages
">
