Tenda
Quick Installation Guide
This Installation Guide is for installation instruction only. For more
product or function details, please visit www.tendacn.com.
AC1200 Smart Dual-Band WiFi Router
Model: AC6
Packing List
e Wireless Router * 1
® Power Adapter * 1
e Ethernet Cable * 1
e Quick Installation Guide*1
Scan to download Tenda App.
Available on the Apple App
Store and Google Play Store
If any item is incorrect, missing or damaged, please keep the original package and
contact local reseller or distributor immediately.
Technical
Support
Shenzhen Tenda Technology Co., Ltd.
6-8 Floor, Tower E3, No. 1001, Zhongshanyuan Road, Nanshan District,
Shenzhen, China. 518052
Canada Hotline: 1-888-998-8966
HongKong Hotline: 00852-81931998
Skype: Tendasz
Website: http://www.tendacn.com
Set up the Router
If you use this router to replace an original one and you have set up a dial-up connection on the original router, start from step 1. Otherwise, start from step 2.
Step 1: Migrate the PPPoE user name and password from the
original router.
Power on the original router and this router, and connect the WAN port of the original router to
one of LAN ports of this router using an Ethernet cable. When all port indicators of this router
stay on for 3 seconds, the PPPoE user name and password are migrated to this router. Then
remove the Ethernet cable.
LAN
4 к
) Fr оо ¢ | >|
ЗЛРТУ 2 1 WAN POWER WIFI RST/WPS
= 7
LT
u AC6
EE Ethernet Cable
Original Router
Step 2: Connect the new router.
Connect devices to the router.
wee ee ee A A A A A A A A A A A ee ee ee ee ee ee ee ee ee ee ee ee Ke
Wireless Connection
Use the WiFi name on the label at the bottom of the router to
connect the wireless devices to the wireless network.
No default WiFi password is set.
Wired Connection
Use an Ethernet cable to connect your computer to a LAN port
of the router.
И ee
E)
| Сна С m) ©) оо 14
Connect your cable with internet connectivity to your router
based on your internet connection type.
3/IPTV 2 1 Y POWER WIFI RST/WPS
L_—
AN
py т |
Co Jarre Ethernet Cable __) Lu Ethernet Cable — |
Ethernet Cable
Step 3: Configure the new router.
1 Start aweb browser on a device connected to the router, enter tendawifi.com or
192.168.0.1 in the address bar, and press Enter.
S © | @ tendawifi.com
pr? |
If you have migrated your PPPoE user name and password, the ISP User Name and
ISP Password are populated automatically. In that case, click Next.
Please select your connection type.
As detected,your connection type may be: PPPoE
Connection Type: [ PPPoE y]
ISP User Name: [admin |
ISP Password: | sees |
2 Click Start. (If the page does not appear, refer to Q1 in FAO.)
4 Customize a WiFi name, WiFi password (for connecting to the WiFi network) and login 5
password (for logging in to the web UI of the router), and then click Next.
Tenda
Tenda Router
Quick Setup Wizard
WiFi Settings
3 Select your internet connection type, and set the required parameters.
Please select your connection type.
As detected,your connection type may be: PPPoE
Connection Type: | PPPoE 2
ISP User Name: | Enter the user name from your ISP. |
ISP Password: | Enter the password from your ISP. |
Import PPPoE user name and password from
the original router.
Skip
Reconnect your wireless devices to the router using the new WiFi name and password if
you have changed them. Then, you can access the internet through your wired and
wireless devices.
Jo >
О Set the WiFi password as the login password of the admin
account.
т. The PPPoE user name and password have
E-mail: [email protected] been imported from the original router. | E | O
Next
Copyright Skip
© 2017 Shenzhen Tenda Technology Co., Ltd. All rights reserved.
Tenda is a registered trademark legally held by Shenzhen Tenda Technology Co., Ltd. Other brand and
product names mentioned herein are trademarks or registered trademarks of their respective holders.
Specifications are subject to change without notice.
Appendix Join Your WiFi
Settings Wi-Fi Enter the password for“Tenda_xxxxxx” Settings WI-FI
| mode cane Enter Password O si | Networks Networks Networks
Airplane Mode OFF Airplane Mode OFF
Wi-Fi connected wen © ON Wi-Fi ТепЧа_хххххх anal aa WW : F :
Bluetooth Off Choose a Network... Password ....u.0..©. © Bluetooth off Choose a Network... | u | . .
Do Not Disturb = Tenda_xxxxxx een OFF ChinaNet-YJ3M WW | = E |
Notifications
General
Sounds
Brightness & Wallpaper
Picture Frame
Privacy
iCloud
Mail, Contacts, Calendars
Notes
Reminders
Tenda_xxxxxx
Tenda_xxxxxx
JOSHUA
Other...
Askto Join Networks
before joining anew network.
Notifications
General
Sounds
Brightness & Wallpaper
Picture Frame
Privacy
iCloud
Mail, Contacts, Calendars
Notes
Reminders
Tenda_xxxxxx
dianshang
JOSHUA
Other...
Askto Join Networks
ically. fno
before joining a new network.
Tenda_XXXXXX
Tenda_4DBDC8
Tenda_O25DC4
У Connect autornatically
0) Co ct
Tenda_XXXXXX
Enter the network security key
©
| Cancel |
ll
ll
(48 Next |
al
Cig & (
AN
oO Click the Settings O) Click Wi-Fi.
© Enter the WiFi password.
Connected successfully!
and click Connect.
® Click the icon “fil in the lower-right
corner of your desktop.
O) Select your WiFi name from the list,
© Enterthe WiFi password (network
security key) of your WiFi.
@) Click Next.
icon.
© Click ON/OFF button to open © Click Join to jointhe
Wi-Fi. wireless network.
© Find the name of the network
you wish to connect and click
it.
LED Indicator Status Description Button Description
Solid on The router is starting. Hold it down for about 8 seconds until all LED indicators blink once to restore
factory settings of the router.
SYS Blinking The system is working properly. WPS/RST Press it to enable the WPS feature of the router. Within 2 minutes after the
- feature is enabled, enable the WPS feature of a wireless device to establish а
Off The router is not connected to a power supply properly, or WPS connection between the router and the wireless device.
not connected to a power supply.
Solid on The LAN port is connected properly. WIFI Press this button to turn on/off WiFi of the router.
1/23 Blinking The LAN portis transmitting or receiving data. POWER Connect it to a power source using the included power adapter
Off The LAN port is not connected, or not connected properly.
WAN Connect this port using an Ethernet cable with internet connectivity
Solid on The WAN port is connected properly.
1/2 These ports can be connected to computers, switches, and so on.
WAN Blinking The WAN port is transmitting or receiving data.
It's a LAN port by default. If the IPTV feature is enabled, it severs as an IPTV
3/IPTV o . b TV
Off The WAN port is not connected, or not connected properly. port. Connect it to a set top box or smart T V.
Solid on The WiFi operates at 2.4 GHz.
246 Blinking The router is transmitting or receiving data wirelessly at 2.4
GHz.
Off The WiFi feature is disabled at 2.4 GHz. Е А О
Solid оп The WiFi operates at 5 GHz.
5G Blinking Ene routeris transmitting or receiving data wirelessly at 5 ОТ: What should | doif | cannot access the web Ul of the router at
tendawifi.com or 192.168.0.1?
Off The WiFi feature is disabled at 5 GHz. АТ: Тгу the following methods:
e Ensure that the connection between the router and your computer
Solid on for 2 wat . .
min->off [The WPS negotiation process succeeds. is correct. If you connect to the router wirelessly, ensure that the
connected WiFi network belongs to the router.
WPS Blinking [Therouteris performing WPS negotiation. e Set the computer to obtain an IP address automatically.
o
off e The router does not perform WPS negotiation. Clear the cache of you rweb browser. .
+ The WPS feature is disabled. e Use another web browser or computer to try again.
e
Reset the router. Power on the router, hold down the RST/WPS button
for about 8 seconds.
Q2:What should | do if | cannot access the internet after configuring
internet settings?
A2:Try the following methods:
e Verify that the router is connected properly. If you use a mobile phone
to access the internet through the router, verify that your mobile
phone is connected to the WiFi network properly.
Set the computer to obtain an IP address automatically.
Use an Ethernet cable to connect your computer to the router, log in
to the router web UI, change the WiFi name and password of the router,
and reconnect to the WiFi network.
Clone the MAC address of your computer to your router.
Contact your ISP for help.
ОЗ: What should | do if | forget the WiFi password?
A3:Try the following methods:
e Checkit on the web UI of the router.
e Ifyou forget the login password as well, reset the router to factory
default settings by holding down the WPS/RST button on the back
panel of the router for 8 seconds. Then you can set a login password
and WiFi password again.
Operating Temperature: 0 °C - 40°C
Operating Humidity: 10% - 90% RH, non-condensing
x
Mmmm RECYCLING
This product bears the selective sorting symbol for Waste electrical and
electronic equipment (WEEE). This means that this product must be
handled pursuant to European directive 2012/19/EU in order to be recycled
or dismantled to minimize its impact on the environment.
User has the choice to give his product to a competent recycling
organization or to the retailer when he buys a new electrical or electronic
equipment.
Connected Al)
ll
ll
Tenda_XXXXXX
Tenda_4DBDC8
Tenda_O25DC4
Connected successfully!
CE
CE Mark Warning
This is a Class B product. Ina domestic environment, this product may cause
radio interference, in which case the user may be required to take adequate
measures.
Operations т the 5.15-5.25GHz band are restricted to indoor use only.
This equipment should be installed and operated with minimum distance
20cm between the radiator & your body.
NOTE: (1) The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment. (2)
To avoid unnecessary radiation interference, it is recommended to use a
shielded RJ45 cable.
Declaration of Conformity
Hereby, SHENZHEN TENDA TECHNOLOGY CO., LTD. declares that the radio
equipment type AC6 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following
internet address: http://www.tendacn.com/en/service/download-cata-
101.html
Operate Frequency:
2.4G: EU/2400-2483.5MHz (CH1-CH13)
5G: EU/5150-5250MHz (CH36-CH48)
EIRP Power (Max.):
2.4GHz: 19.67dBm
5GHz: 22.21dBm
Software Version:V15.03.06.XX
A ci Caution:
Adapter Model: BNO52-A09009E
Manufacture: SHENZHEN HEWEISHUN NETWORK TECHNOLOGY CO. LTD.
Input: 100 - 240 V ~ 50/60 Hz 0.3 A
Output: Э\ = 1.0А
=:DCVoltage
FC ЕН
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device is restricted to be used in the indoor.
Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with minimum distance
20cm between the radiator & your body.
Caution:
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this
equipment.
This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
NOTE: (1) The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment. (2)
To avoid unnecessary radiation interference, it is recommended to use a
shielded RJ45 cable.
">
