Sprint Mobile Broadband

USB Modem by Sierra Wireless

AirCard

®

595U www.sprint.com

© 2007 Sprint Nextel. All rights reserved. No reproduction in whole or in part without prior written approval. Sprint, the “Going Forward” logo, and other trademarks are trademarks of Sprint Nextel.

Table of Contents

Welcome to Sprint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii

Section 1: Basics of Your Sprint Mobile Broadband USB Modem . . . . . . . . . . . . . . . . . .1

1A. Introducing the Sprint Mobile Broadband USB Modem . . . . . . . . . . . . . . . . . . . 3

Your Sprint Mobile Broadband USB Modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

CDMA Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

1B. Getting Started With Your Sprint Mobile Broadband USB Modem . . . . . . . . . 7

Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

The Sprint Mobile Broadband USB Modem Software . . . . . . . . . . . . . . . . . . . . . . . 10

Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Section 2: Installing the Sprint Mobile Broadband USB Modem . . . . . . . . . . . . . . . . . .13

2A. Installing the Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

2B. Inserting and Removing the Sprint Mobile Broadband USB Modem . . . . . . .19

Inserting the Sprint Mobile Broadband USB Modem . . . . . . . . . . . . . . . . . . . . . . . . 20

Removing the Sprint Mobile Broadband USB Modem . . . . . . . . . . . . . . . . . . . . . . . 20

2C. Setting Up Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Activating and Using Sprint Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Preactivated Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Non-preactivated Device: Activation Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Data Provisioning (IOTA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

2D. Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Visiting the Sprint Web Site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Contacting Sprint Customer Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Section 3: Using the Sprint Mobile Broadband USB Modem . . . . . . . . . . . . . . . . . . . . .29

3A. Your Sprint Mobile Broadband USB Modem: The Basics . . . . . . . . . . . . . . . . .31

Sprint Connection Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Starting Sprint Connection Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Starting Sprint Connection Manager Automatically . . . . . . . . . . . . . . . . . . . . . . . . 33

Sprint Connection Manager Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Connection States . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

System Tray Connection States . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Determining the Type of Coverage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Location-Based Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Powering the Device On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Controlling the Sprint Connection Manager Window . . . . . . . . . . . . . . . . . . . . . . . 43

Launching a Sprint Power Vision or Sprint Vision Connection . . . . . . . . . . . . . . . 45

Viewing the Amount of Data Transferred . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Ending a Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Online Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Displaying Your Phone Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Accessing Links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Uninstalling the Sprint Connection Manager Software . . . . . . . . . . . . . . . . . . . . . 54

3B. Menu Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Sprint Connection Manager Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

System Tray Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

3C. Changing the Settings of Sprint Connection Manager . . . . . . . . . . . . . . . . . . .59

Settings Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

General Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Sprint Vision Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Sprint Location Services Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

3D. Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

Viewing the Connection History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Viewing Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Running Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Updating the Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

About Sprint Mobile Broadband . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

3E. Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76

What is Sprint Connection Manager? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

If the connection is “always on,” am I always being billed? . . . . . . . . . . . . . . . . . . 77

How fast is the connection with Sprint Connection Manager? . . . . . . . . . . . . . . 77

Can I connect to a dial-up account like AOL or EarthLink? . . . . . . . . . . . . . . . . . . . 77

How do I get the location-enhanced Local Search feature? . . . . . . . . . . . . . . . . . . 77

Where do I find the location-enhanced Local Search feature? . . . . . . . . . . . . . . . 78

How do I use the location-enhanced Local Search feature? . . . . . . . . . . . . . . . . . 78

Where can I use GPS? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Once I connect to the network, how do I access my corporate network through a VPN? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

How can I optimize my settings to achieve the fastest speeds and conserve data when accessing my corporate network? . . . . . . . . . . . . . . . . . . . . . 78

Why won’t my laptop go into hibernation mode when using my

Sprint Mobile Broadband USB Modem? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

3F. Troubleshooting Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80

Problems, Causes, and Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

GO Button Is Unavailable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Searching for Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Cannot Connect to the Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Power LED Goes Off and On, and Then Stays Red . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Location-Based Services Don't Seem To Be Available . . . . . . . . . . . . . . . . . . . . . . . . 84

Could Not Prepare Data Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Unable To Prepare Data Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Sprint Connection Manager Stops Working After Upgrading Windows . . . . . . 85

Section 4: Technical Specifications and Regulatory Information . . . . . . . . . . . . . . . . .87

4A. Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89

LED Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Radio Frequency and Electrical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Software Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

Environmental Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Mechanical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

4B. Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94

Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

Patents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

Limitation of Liability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

Additional Information and Updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

Section 5: Safety Information and Terms & Conditions . . . . . . . . . . . . . . . . . . . . . . . 101

5A. Safety and Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

Important Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

Safety and Hazards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

5B. Terms and Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

Subscriber Agreement/General Terms and Conditions of Services . . . . . . . . . 106

Section 6: Glossary and Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123

6A. Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125

6B. Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129

Welcome to Sprint

We are committed to bringing you the best wireless technology available, and we built our network right from the start, so no matter where you are on the network, all your services will work the same.

When it comes to mobile connectivity, the Sprint Mobile Broadband USB modem offers more freedom than ever before. No wires, no cables, just access to your data when you need it. The power of the Internet and company data is truly at your fingertips.

This guide will familiarize you with our technology and with Sprint Connection

Manager SM software with location-enhanced Local Search and your new

Sprint Mobile Broadband USB modem through simple, easy-to-follow instructions.

Welcome and thank you for choosing Sprint.

i

ii

Introduction

This User’s Guide introduces you to Sprint service and all the features of your new wireless Sprint Mobile Broadband USB modem. It’s divided into six sections:

⽧

Section 1: Basics of Your Sprint Mobile Broadband USB Modem

⽧

Section 2: Installing the Sprint Mobile Broadband USB Modem

⽧

Section 3: Using the Sprint Mobile Broadband USB Modem

⽧

Section 4: Technical Specifications and Regulatory Information

⽧

Section 5: Safety Information and Terms & Conditions

⽧

Section 6: Glossary and Index

Throughout the guide, you’ll find tips that highlight special shortcuts and timely reminders to help you make the most of your wireless USB modem and services.

The Table of Contents and Index will help you locate specific information quickly.

The Sprint Connection Manager software includes extensive online help to guide you through the steps to use each feature.

You’ll get the most out of your new Sprint Mobile Broadband USB modem if you read each section of this document. However, if you’d like to get right to a specific feature, simply go to that page. Follow the instructions in that section and you’ll be ready to use your device in no time.

Tip: You can view this guide online or print it to keep on hand. If you’re viewing it online,

simply click a topic in the Table of Contents, a page number in the Index, or any page

or section reference. The PDF automatically displays the appropriate page.

Section 1

Basics of Your

Sprint Mobile Broadband USB Modem

2

S e c t i o n 1 A

Introducing the Sprint Mobile Broadband

USB Modem

In This Section

⽧

Your Sprint Mobile Broadband USB Modem

⽧

CDMA Networks

⽧

Package Contents

⽧

About This Guide

This section introduces the basic features and functions of your Sprint Mobile

Broadband USB modem, what is included with your device, and how to use this guide to get you started.

Section 1A: Introducing the Sprint Mobile Broadband USB Modem 3

4

Your Sprint Mobile Broadband USB Modem

The Sierra Wireless AirCard® 595U USB modem is a dual-band wireless USB modem. It enhances the functionality of your mobile or desktop computing devices by adding wireless data.

This device allows you to do the following (subject to feature availability), without using a landline phone or network:

䢇

Connect to the Internet, VPN, and corporate networks

䢇

Send and receive large email messages

䢇

Use Location-Based Services (on Windows® only)

䢇

Conduct video-conferencing

䢇

Access streaming, real-time media

䢇

Play games online

Your Sprint Mobile Broadband USB modem fits into a USB slot (available on most notebook and desktop PCs).

CDMA Networks

The Sprint Mobile Broadband USB modem operates over a type of wireless network called CDMA (Code Division Multiple Access).

To use the Sprint Mobile Broadband USB modem, you need an account that gives you access to the CDMA network. Some features described in this manual may not be available with your account. For details of the services and accounts available,

contact Sprint (page 27).

There are CDMA networks that operate in the frequency bands supported by the Sprint Mobile Broadband USB modem throughout North America and parts of

Latin America, Asia, and New Zealand. However, each service provider operates a network that covers a limited geographical area within the overall CDMA coverage area.

The fee for service may be higher when you are roaming (connecting to a network other than Sprint).

Sprint has “roaming” agreements with other service providers, so that you can get service outside of the coverage area of the network. (There may be additional charges for roaming service.)

Section 1A: Introducing the Sprint Mobile Broadband USB Modem

CDMA technology provides a variety of connectivity features, depending on your

Sprint account (actual speed depends on the network conditions):

䢇 1xEV-DO Rev. A (Sprint Power Vision SM ) supports Internet connections with data rates up to 3.1 Mbps (downlink from the network) and 1.8 Mbps (uplink to the network). Average data rates are 450-800 kbps (downlink from the network) and 300-400 kbps (uplink to the network).

䢇 1xEV-DO Rev. 0 (Sprint Power Vision) supports Internet connections with data rates up to 2.4 Mbps (downlink from the network) and 153 kbps (uplink to the network). Average data rates are 400-700 kbps (downlink from the network) and 40-80 kbps (uplink to the network).

䢇 1X (Sprint Vision) supports Internet connections with data rates up to 153 kbps.

You can set Sprint Connection Manager to automatically establish a packet data connection (Sprint Power Vision or Sprint Vision) when it starts.

You can also set Sprint Connection Manager so that, without running

Sprint Connection Manager, you can make a Sprint Power Vision or Sprint Vision connection simply by starting whatever application you want to use (such as your

Web browser or email application).

If the packet data connection is lost, the connection is restarted automatically.

This provides an “always-on” network connection (as far as permitted by network coverage). Once the connection is established, you can open your browser and connect to any Web site that is accessible through the Internet, or access other

Internet services (such as email).

The connection is “active” when data transmission is occurring. If data transmission stops for a period of time (determined by the network), the

connection becomes “dormant.” (See page 35.)

Tip: More information about CDMA networks is available on the CDMA Development

Group Web site, www.cdg.org

.

Tip:

For pointers on optimizing your settings, see “How can I optimize my settings to achieve the fastest speeds and conserve data when accessing my corporate network?” on page 78.

Section 1A: Introducing the Sprint Mobile Broadband USB Modem 5

Package Contents

Your Sprint Mobile Broadband USB modem package contains the following components:

䢇 Sprint Mobile Broadband USB modem by Sierra Wireless (Model AirCard 595U)

䢇 Rechargeable modem battery

䢇 Docking station with attached cable

䢇 Getting Started guide

䢇 Installation CD containing the Sprint Connection Manager software, warranty information, and this document

About This Guide

This user's guide is designed to provide you with all the information you need to install and use your Sprint Mobile Broadband USB modem by Sierra Wireless

(AirCard 595U).

Note: The comprehensive Getting Started guide that comes with the

Sprint Mobile Broadband USB modem should be sufficient for most installations.

䢇 Section 1 (which you are reading) gives you an overview of the Sprint Mobile

Broadband USB modem (AirCard 595U).

䢇 Section 2 provides step-by-step instructions for installing the Sprint Mobile

Broadband USB modem and Sprint Connection Manager software (page 13).

䢇 Section 3

provides step-by-step instructions on using the device (page 29).

䢇 Section 4 provides electrical, radio frequency, and other parameters of the

Sprint Mobile Broadband USB modem for those who require technical

information, as well as regulatory information (page 87).

䢇 Section 5 provides important safety and liability information and the Terms and

Conditions of use for the Sprint Mobile Broadband USB modem (page 101).

䢇 Section 6

include a glossary (page 125) and index (page 129).

6 Section 1A: Introducing the Sprint Mobile Broadband USB Modem

S e c t i o n 1 B

Getting Started With Your Sprint Mobile Broadband

USB Modem

In This Section

⽧

Getting Started

⽧

System Requirements

⽧

The Sprint Mobile Broadband USB Modem Software

⽧

Care and Maintenance

This section describes the basics of getting started with your Sprint Mobile

Broadband USB modem, and how to look after your device.

Section 1B: Getting Started With Your Sprint Mobile Broadband USB Modem 7

Getting Started

CAUTION: Do not insert the Sprint Mobile Broadband USB modem into the USB slot until you have installed and run the Sprint Connection Manager software, and the software displays “No device.”

Before you begin using your Sprint Mobile Broadband USB modem, you must:

1.

Check that your computer has the system requirements listed below (“System

Requirements”).

2.

Install the Sprint Connection Manager software, located on the installation

CD, onto your PC. See page 16.

3.

Start Sprint Connection Manager.

4.

Insert the battery into the Sprint Mobile Broadband USB modem, and insert the device into your computer; this installs the drivers for the device.

5.

Charge the battery for approximately two hours.

6.

Activate your Sprint account and configure the Sprint Mobile Broadband USB modem to use your account (unless the device has been preactivated). See

page 22.

System Requirements

The Sprint Mobile Broadband USB modem is supported on:

䢇 Windows Vista.

䢇 Windows XP (Home and Professional versions).

䢇 Windows 2000 with Service Pack 1 or later (Service Pack 4 is recommended),

with high encryption support. (See “High Encryption Requirements” on page 9.)

䢇 Mac OS X (supported through the Watcher TM Lite software—available from the

Sierra Wireless Web site at www.sierrawireless.com/support ).

8 Section 1B: Getting Started With Your Sprint Mobile Broadband USB Modem

To install and run the Sprint Mobile Broadband USB modem and accompanying

Sprint Connection Manager software, you will need the minimum system resources shown in the following table.

USB slots One USB slot. (If your computer’s USB slot is vertical, use the docking station. Do not use the Sprint Mobile Broadband USB modem in a USB hub or in a USB slot on a keyboard.)

Optical drive CD-ROM

Memory 32 MB

Disk space 32 MB

High Encryption Requirements

Depending on your configuration, an IOTA (Internet Over The Air) session may automatically start as part of the installation/activation process. IOTA requires high-security 128-bit encryption to establish a secure Internet connection to the

CDMA network. (For more information, see “Data Provisioning [IOTA]” on page 25.)

If you are running Windows Vista or Windows XP, your computer should already include high-security 128-bit encryption.

If you are running Windows 2000 with Internet Explorer

1.

Ensure you have installed the Windows 2000 High Encryption Pack: in Internet

Explorer, select Help > About Internet Explorer .

If you see “Cipher Strength: 128-bit,” then the High Encryption Pack is installed. Proceed to step 2.

If the High Encryption Pack is not installed, download and install it

( www.microsoft.com/windows2000/downloads/recommended/encryption ).

2.

If your version of Internet Explorer is earlier than 5.5, download and install the latest version ( www.microsoft.com/windows/ie/downloads ).

If you are running Windows 2000 with Netscape Communicator

Ensure your version of Netscape Communicator is 4.7 or higher.

To verify that your version supports 128-bit encryption:

1.

In Navigator, select Help > About Navigator .

– or –

In Netscape Communicator, select Help > About Communicator .

Section 1B: Getting Started With Your Sprint Mobile Broadband USB Modem 9

2.

See the section “Contains encryption software from RSA Data Security, Inc.”

If the next paragraph states “This version supports U.S. security,” you have

128-bit security.

If the paragraph states that you have International security, you have 40-bit security. Download a version that supports 128-bit security.

The Sprint Mobile Broadband USB Modem Software

The Sprint Mobile Broadband USB modem comes with the following software:

䢇 Sprint Connection Manager, which allows you to manage the device’s actions and monitor your connections

䢇 The driver software that forms the interface between the Sprint Mobile

Broadband USB modem and your Windows operating system

Before you insert the Sprint Mobile Broadband USB modem for the first time, you must install and then run the Sprint Connection Manager software. The driver software is installed the first time you insert the device into your computer.

Detailed instructions are provided beginning on page 16.

Care and Maintenance

As with any electronic device, the Sprint Mobile Broadband USB modem must be handled with care to ensure reliable operation. Follow these guidelines in using and storing the device:

䢇

The device should fit easily into your USB slot. Forcing the device into a slot may damage the connector pins.

䢇

Protect the device from liquids, dust, and excessive heat.

䢇 When not installed in your computer, store the device in a safe place.

䢇 Remove the device before storing or transporting your computer.

䢇

When inserting or removing the device, always grip it by the sides rather than the end.

䢇

To avoid the risk of explosion, use the same battery model when replacing the battery. Properly dispose of the used battery.

䢇

The device’s USB connector is adjustable to three positions. Do not force the hinge past the last position—this may break the connector. For more

information, see the picture on page 17.

10 Section 1B: Getting Started With Your Sprint Mobile Broadband USB Modem

䢇 Do not use the device with a handheld computer; it is designed only for notebook or desktop computers running Windows ® Vista, XP, 2000, or

Mac OS X.

䢇 Do not handle or operate the device while driving or operating a vehicle. Doing so may distract you from properly operating the vehicle. In some states and provinces, operating communication devices while in control of a vehicle is a criminal offense.

Section 1B: Getting Started With Your Sprint Mobile Broadband USB Modem 11

12

Section 2

Installing the Sprint Mobile

Broadband USB Modem

14

S e c t i o n 2 A

Installing the Software

In This Section

⽧

Getting Started

This section explains how to install your Sprint Connection Manager software.

The process may vary, depending on the operating system that you are running.

Section 2A: Installing the Software 15

Getting Started

Note: For comprehensive instructions on installing the Sprint Connection

Manager software and activating the device, see the Getting Started guide.

Before you can use your device, you must first install the device’s software and configure the device for your computer. The installation process consists of:

䢇 Software installation - Installing the Sprint Connection Manager software on your computer (described in this section).

䢇 Insertion of the rechargeable battery into the device

䢇 Device insertion and driver installation - Starting the Sprint Connection Manager software and inserting the device, which automatically installs the drivers on your computer.

䢇 Device activation and provisioning - Activating your Sprint account and

configuring the device to use your account. (See “Setting Up Service” on page 21.)

CAUTION: Do not insert the device into your computer’s USB slot before installing the software.

Note: Windows Vista and Windows 2000 users: You must log in with administrative privileges to install the software and drivers.

Windows XP users: You may need to log in with administrative privileges, depending on your Windows configuration.

1.

If the installation CD is not already in your CD-ROM drive, insert it.

16

The CD should autostart.

If the CD does not autostart, select Start > Run and enter d:\SCMInstaller.exe

, where d is the drive letter of your CD-ROM drive.

Section 2A: Installing the Software

2.

Use the Next and Back buttons to navigate through the wizard, noting the following:

䡲 You must select I accept the terms in the license agreement to indicate your acceptance of the terms of the license agreement to proceed with the installation.

䡲 Use the default settings for the Destination Folder unless you have special requirements and an advanced understanding of PC configuration. (The

Destination Folder dictates where the software is installed.)

3.

When the “Installation Complete!” window is displayed, click Finish .

4.

Run Sprint Connection Manager.

(Double-click the program’s icon [ ] on your desktop.)

5.

Wait for Sprint Connection Manager to start up and display “No device...”.

6.

Slide the front panel off the Sprint Mobile Broadband USB modem.

7.

Hold the battery so that the side with two white arrows faces up and the gold contact points on the end of the battery line up with the gold contact points on the Sprint Mobile Broadband USB modem. Insert the battery into the device.

Warning: To avoid the risk of explosion, use the same battery model when replacing the battery. Properly dispose of the used battery.

8.

Slide the front panel onto the device until the panel clicks into place.

9.

Slide the lever on the bottom of the device in the direction indicated by the triangle to release the device's USB connector.

10.

Adjust the USB connector to the desired angle. (The USB connector is adjustable to three positions—approximately 90, 135, and 160 degrees. Do not force the hinge past the last position—this may break the connector.)

Section 2A: Installing the Software 17

11.

Insert the device into your computer’s USB slot.

Alternatively, you can attach the docking station to your computer’s USB slot, and insert the device into the docking station.

Note: If your computer’s USB slot is vertical, use the docking station.

Do not insert the device into a USB hub or a USB slot on a keyboard.

Warning: If the orientation of your computer’s USB slot or the thickness of your computer are such that pressure is applied to the device’s end or side (as shown by the red circles in the drawings below), you may damage the device or your computer. In such cases, do not insert the device directly into your computer’s USB slot; use the docking station instead.

When the device is properly inserted, the Power LED is lit, and the battery starts to charge.

Windows detects the device and installs the drivers for it. This may take a few minutes. Once completed, Sprint Connection Manager should display

“Disconnected.”

12.

Charge the battery for approximately two hours.

Note: If you have an older version of Sprint Connection Manager and are experiencing problems during installation, use the Add/Remove Programs

Utility (see page 54) to remove the older version of Sprint Connection

Manager. Then reinstall the current version of Sprint Connection Manager from the Installation CD.

After you’ve charged the battery, proceed to configure the device to use your

account (if it was not preactivated); see “Activating and Using Sprint Service” on page 22. If your device is preactivated, after you’ve charged the battery, you are

ready to connect to the network; to learn about using the software, see “Your

Sprint Mobile Broadband USB Modem: The Basics” on page 31.

18 Section 2A: Installing the Software

S e c t i o n 2 B

Inserting and Removing the Sprint Mobile Broadband

USB Modem

In This Section

⽧

Inserting the Sprint Mobile Broadband USB Modem

⽧

Removing the Sprint Mobile Broadband USB Modem

This section describes how to properly insert the Sprint Mobile Broadband USB modem and remove it from your PC.

Section 2B: Inserting and Removing the Device 19

Inserting the Sprint Mobile Broadband USB Modem

To insert the Sprint Mobile Broadband USB modem into a notebook or desktop computer:

1.

Holding the Sprint Mobile Broadband USB modem by its sides, insert the device into the USB slot of your computer.

Alternatively, you can attach the docking station to your computer’s USB slot, and insert the device into the docking station.

Note: If your computer’s USB slot is vertical, use the docking station. Do not insert the Sprint Mobile Broadband USB modem into a USB hub or a USB slot on a keyboard.

When you insert the Sprint Mobile Broadband USB modem, the following should occur:

䢇 The first time the device is inserted, Windows detects the device and installs the drivers for it. This may take a few minutes. Once completed,

Sprint Connection Manager should display “Disconnected.” To connect to the network, click GO .

䢇 If sound effects are enabled, the PC beeps.

The Sprint Mobile Broadband USB modem is powered as soon as you insert it.

Removing the Sprint Mobile Broadband USB Modem

IMPORTANT!

When inserting or removing your device, always grip the device by its sides. Gripping the device by its end may damage the device.

To remove the Sprint Mobile Broadband USB modem:

1.

Exit Sprint Connection Manager if it is open (page 44).

2.

Remove the device from your computer’s USB slot by gripping both sides of the device and pulling straight out.

20 Section 2B: Inserting and Removing the Device

S e c t i o n 2 C

Setting Up Service

In This Section

⽧

Activating and Using Sprint Service

⽧

Preactivated Device

⽧

Non-preactivated Device: Activation Wizard

⽧

Data Provisioning (IOTA)

This section walks you through setting up service for your Sprint Mobile

Broadband USB modem, after you have installed the Sprint Connection Manager

software (page 16) and inserted the Sprint Mobile Broadband USB modem.

Section 2C: Setting Up Service 21

Activating and Using Sprint Service

Before using your Sprint Mobile Broadband USB modem, you must have a

Sprint wireless network account set up. The process of setting up an account is called activation.

When the Sprint Mobile Broadband USB modem is inserted and

Sprint Connection Manager is started, it will detect whether the device has been configured with an account (“preactivated”). If it has not, the Activation Wizard starts automatically.

Preactivated Device

If you received your Sprint Mobile Broadband USB modem in the mail or purchased it at a Sprint Store, it probably has already been activated.

To prevent unauthorized use, preactivated devices may have been set with a security lock. If so, Sprint Connection Manager displays the message “Device locked.”

To unlock your Sprint Mobile Broadband USB modem:

1.

Click the icon. (If is not visible, click to expand Sprint Connection

Manager.)

2.

In the Enter User Lock Code window, enter your four-digit lock code, and click

OK . For security purposes, the code is not visible as you type.

Tip: If you can’t recall your lock code, try using the last four digits of either your

Social Security number or your device’s phone number (MDN), or try 0000. If none of these work, call Sprint Customer Service at 1-888-211-4727.

After unlocking your preactivated Sprint Mobile Broadband USB modem, it is

ready for use. See “Using the Sprint Mobile Broadband USB Modem” on page 29.

22 Section 2C: Setting Up Service

Non-preactivated Device: Activation Wizard

If your device is not preactivated, please see the Getting Started guide included with your device.

If your Sprint Mobile Broadband USB modem is not preactivated,

Sprint Connection Manager automatically detects that no account has been configured when you run it for the first time. It then runs the Activation Wizard to guide you through the activation and configuration process.

To set up your account, you will be contacting Sprint.

Before you call Sprint, have these things ready:

䢇

A phone

䢇

Your Sprint Mobile Broadband USB modem

䢇

Your Social Security number

䢇

Your driver’s license number

䢇

The city and state where the device will be primarily used

䢇

A pen and paper to write down your account information. Your package includes a printed Getting Started guide, where you can record this information.

When you call Sprint, Sprint Customer Service will help you select your service plan and guide you through the activation process. They will also provide you with this information:

䢇 Your device’s activation code (gives you access to configure the account)

䢇 Your device’s phone number (MDN)

䢇 Your device’s MSID (Mobile System ID) code, used for WLNP (Wireless Local

Number Portability) and to determine whether you are “home” or “roaming”

Section 2C: Setting Up Service 23

Stepping Through the Activation Wizard

If the Activation Wizard has not started automatically:

1.

Ensure the Sprint Mobile Broadband USB modem is inserted, and

Sprint Connection Manager is running. If Sprint Connection Manager is not running, select:

(Windows Vista or Windows XP) Start > All Programs > Sprint > Sprint Mobile

Broadband (Sierra) .

(Windows 2000) Start > Programs > Sprint > Sprint Mobile Broadband (Sierra) .

Sprint Connection Manager should display “Disconnected.”

2.

If Sprint Connection Manager displays “Device locked,” unlock the device

(page 52).

3.

If Sprint Connection Manager displays “Device powered off,” power the device

on (page 38).

4.

Start the Activation Wizard: select MENU > Settings > Sprint Vision - Sierra

Wireless > Activation Wizard .

Once the Activation Wizard is running:

1.

To begin activation of the Sprint Mobile Broadband USB modem, click Next .

2.

Call Sprint at the phone number listed on the screen. Click Next .

3.

Give the account representative your ESN (Electronic Serial Number) or MEID

(Mobile Equipment IDentifier) number as displayed by the Activation Wizard.

Enter the activation code provided by the account representative and click Next .

4.

Enter the phone number (no spaces or hyphens) and, if not the same value as the phone number, the MSID value given by the account representative, and then click Next .

A confirmation window will be displayed.

5.

Confirm with the service representative that the information is correct. If it is, click Yes . If it isn't, click No , and re-enter the information.

6.

Click Finish to close the Activation Wizard.

7.

Wait a few moments for the Sprint Mobile Broadband USB modem to automatically reset. Depending on your configuration, an IOTA session may

automatically start. (See “Data Provisioning [IOTA]” on page 25.)

After Sprint sets up your account on the network, your Sprint Mobile Broadband

USB modem should be configured and ready for use.

24 Section 2C: Setting Up Service

Data Provisioning (IOTA)

IOTA (Internet Over The Air), supported by some service providers (including

Sprint), is an automated feature to perform account setup for you by making a connection to the CDMA network and using a secure Internet connection to download account parameters to your Sprint Mobile Broadband USB modem. To make this secure connection, IOTA requires that your computer support 128-bit

encryption. (See “High Encryption Requirements” on page 9.)

Depending on your configuration, the first time Sprint Connection Manager detects the activated device, an IOTA session may automatically start, during which status messages (“Updating User Profile…”) are displayed.

After this first activation, there may be changes to your account that require updating the parameters in the Sprint Mobile Broadband USB modem. If this is needed:

1.

In the Device Info & Diagnostics window (page 72), click

Update Data Profile .

(If this button is not displayed, remove and reinsert the device.)

2.

In the IOTA Provisioning window, click Yes .

Your Sprint Mobile Broadband USB modem then retrieves the updates to your data services account. Once the updates are successful, Sprint Connection

Manager is displayed (“Disconnected”). You can now connect to the network.

Section 2C: Setting Up Service 25

S e c t i o n 2 D

Getting Help

In This Section

⽧

Visiting the Sprint Web Site

⽧

Contacting Sprint Customer Service

⽧

Troubleshooting

This section describes where you can find more information on Sprint services, options, and troubleshooting problems you have encountered.

26 Section 2D: Getting Help

Visiting the Sprint Web Site

Stop by www.sprint.com

and log on to get up-to-date information on

Sprint services, options, and more.

You can also:

䢇

Review coverage maps.

䢇

Access your account information.

䢇

Add additional options to your service plan.

䢇

Check out frequently asked questions.

䢇

And more.

Contacting Sprint Customer Service

You can reach Sprint Customer Service by:

䢇 Logging on to your account at www.sprint.com

.

䢇 Calling us toll-free at 1-888-211-4727 .

䢇 Writing to us at Sprint Customer Service, P.O. Box 8077,

London, KY 40742.

Troubleshooting

The Online Help for Sprint Connection Manager (see page 49) includes

descriptions of most common error messages. Look in the Contents under

Troubleshooting.

For help with other problems:

䢇

See “Troubleshooting Tips” on page 80.

䢇

Consult the Sierra Wireless Web site at www.sierrawireless.com

, where you will find an extensive knowledge base that can be searched to address most problems, and the Installation Troubleshooting wizard (in the Support &

Download section).

䢇

Contact Sprint as noted above.

Section 2D: Getting Help 27

28

Using the Sprint Mobile

Broadband USB Modem

Section 3

30

S e c t i o n 3 A

Your Sprint Mobile Broadband USB Modem: The Basics

In This Section

⽧

Sprint Connection Manager

⽧

Starting Sprint Connection Manager

⽧

Starting Sprint Connection Manager Automatically

⽧

Sprint Connection Manager Window

⽧

Connection States

⽧

System Tray Connection States

⽧

Determining the Type of Coverage

⽧

Location-Based Services

⽧

Powering the Device On and Off

⽧

Controlling the Sprint Connection Manager Window

⽧

Launching a Sprint Power Vision or Sprint Vision Connection

⽧

Viewing the Amount of Data Transferred

⽧

Ending a Connection

⽧

Online Help

⽧

Displaying Your Phone Number

⽧

Security

⽧

Accessing Links

⽧

Uninstalling the Sprint Connection Manager Software

Your Sprint Mobile Broadband USB modem is packed with features that simplify your life and expand your ability to stay connected to the people and information that are important to you. This section guides you through the basic features of your Sprint Mobile Broadband USB modem.

Section 3A: Your Sprint Mobile Broadband USB Modem: The Basics 31

Sprint Connection Manager

Sprint Connection Manager is the application that allows you to manage and monitor the high-speed Sprint Power Vision (1xEV-DO) and Sprint Vision (1X) connection to the Sprint network. You use Sprint Connection Manager to:

䢇

Determine your signal strength and other network connection parameters (page 33).

䢇

Initiate data calls (page 45).

䢇

Access Location-Based Services (page 40).

䢇

View call statistics (page 70) and messages (page 35).

䢇

Customize features and options (page 60).

Tip: Without running Sprint Connection Manager, you can make a data connection simply by starting whatever application you want to use (such as your Web browser or email application). Prerequisites: you must have previously selected, in

Sprint Connection Manager, Enable NIC for data connections and GO automatically when ready

(page 64). However, to make use of other features of the Sprint Mobile

Broadband USB modem (including Location-Based Services), you must run

Sprint Connection Manager.

Starting Sprint Connection Manager

To start Sprint Connection Manager:

1.

Ensure the Sprint Mobile Broadband USB modem is inserted into your computer’s USB slot.

2.

Double-click the program’s icon ( ) on your desktop, or, from the Start menu on your Windows desktop, select:

(Windows Vista or Windows XP) All Programs > Sprint > Sprint Mobile Broadband

(Sierra) .

(Windows 2000) Programs > Sprint > Sprint Mobile Broadband (Sierra) .

When Sprint Connection Manager is running, it places an icon ( ) in the system

tray, usually at the right end of the taskbar. (See page 39.)

Tip: You can also set Sprint Connection Manager to launch automatically

whenever your device is detected. (See “Starting Sprint Connection

Manager Automatically” on page 33.)

32 Section 3A: Your Sprint Mobile Broadband USB Modem: The Basics

Starting Sprint Connection Manager Automatically

To set Sprint Connection Manager to start automatically (whenever your device is detected):

䊳

From the General option of the Settings window (page 61), select

Launch

Connection Manager automatically .

Note: Changes to this setting apply only after you restart Windows.

Tip: You can also set the connection to launch automatically whenever

available. (See “ GO automatically when ready ” on page 64.) These settings

provide an “always-on” connection, as long as you have network coverage.

Sprint Connection Manager Window

Menu Message area Indicator area Minimize Exit

Show/ hide details

Establish/ cancel a connection

The text (for example, “Connected” shown in the screenshot above) and icon(s) in

Sprint Connection Manager indicate the connection state (page 35), and also (only

when disconnected) the lock state (page 50) (locked

or unlocked ).

Section 3A: Your Sprint Mobile Broadband USB Modem: The Basics 33

34

Sprint Connection Manager may display, depending on the connection state, some of the following icons:

CDMA network signal strength, indicated by the number of bars.

The ToolTip indicates the type of coverage you have (for example, 1X and/or 1xEV-DO), and the signal strength, in dBm.

You are roaming. Roaming charges may apply.

If this icon is flashing, you are in a non-preferred roaming area, and you may not be able to complete your calls.

Tip: You can change the roaming option ("Roam Mode"; for example, to disable roaming, select Sprint), and also enable the Roam Guard feature (from

the Sprint Vision Settings window; page 63).

1xEV-DO Rev. A transmit/receive icon: a data connection is active.

The up arrow is animated (for example: ) when data is being transmitted to the network.

The down arrow is animated (for example: ) when data is being received from the network.

1xEV-DO Rev. 0 transmit/receive icon: a data connection is active.

The up arrow is animated (for example: ) when data is being transmitted to the network.

The down arrow is animated (for example: ) when data is being received from the network.

1xEV-DO (Rev. 0 and Rev. A) transmit/receive icon: the data connection is dormant. The up and down arrows are gray.

1X transmit/receive icon: a data connection is active.

The up arrow is black and animated when data is being transmitted to the network.

The down arrow is black and animated when data is being received from the network.

1X transmit/receive icon: the data connection is dormant. The up and down arrows are gray.

Section 3A: Your Sprint Mobile Broadband USB Modem: The Basics

Sprint Connection Manager has the following buttons and text:

䢇 Menu or the button — Displays the Sprint Connection Manager menu

(page 56).

䢇

— Expands Sprint Connection Manager and displays the amount of data transferred (when Connected), or, when disconnected, the lock status of your device (locked or unlocked ).

䢇

(Displayed when Sprint Connection Manager is expanded) — Hides the amount of data transferred and the lock status of your device.

䢇 (upper right corner of the window) — Minimizes Sprint Connection Manager

(page 44).

䢇 — Exits Sprint Connection Manager.

䢇 GO

— Starts the Sprint Power Vision or Sprint Vision connection (page 45).

䢇 Stop — Ends the connection (visible when a connection is established).

Connection States

Sprint Connection Manager can display various connection and interaction states, including:

䢇 No device

䢇 Initializing

䢇

Updating User Profile… (See “Data Provisioning [IOTA]” on page 25.)

䢇 Searching for service...

䢇 Disconnected

䢇 Connecting

䢇 Connected

䢇 Connected to NDIS

䢇 Device locked

䢇 Device powered off

Section 3A: Your Sprint Mobile Broadband USB Modem: The Basics 35

If you initiate Location-Based Services (page 40), a window may display

“Searching.”

Note: The system tray icon also indicates the connection state (page 16).

No device

Sprint Connection Manager did not detect the Sprint Mobile Broadband USB modem. The GO button is unavailable.

Insert the Sprint Mobile Broadband USB modem. If it is already inserted, remove and reinsert it; wait a few moments. If this message is still displayed, uninstall

(page 54) and reinstall Sprint Connection Manager, or contact Sprint (page 27).

Initializing

Sprint Connection Manager is attempting to establish communication with the

Sprint Mobile Broadband USB modem.

Searching for service...

Sprint Connection Manager is determining whether 1X or 1xEV-DO service is

available. If this message persists, see page 82.

Disconnected

Sprint Connection Manager is ready to make a connection to the network or to use Location-Based Services. The GO button is available; the signal strength icon

( ) and the roaming icon ( ) (if you’re roaming) are visible. If Sprint Connection

Manager is expanded, the lock icon ( or ) is visible.

36 Section 3A: Your Sprint Mobile Broadband USB Modem: The Basics

To connect to the network, click GO .

Connecting

Sprint Connection Manager is establishing a connection to the network.

Connected

The connection is established. In addition to the signal strength icon ( ) and the roaming icon ( ) (if you’re roaming), the transmit/receive icon ( for 1xEV-DO

Rev. A; for 1xEV-DO Rev. 0; for 1X) is also displayed.

If you expand Sprint Connection Manager ( ), the amount of data transferred is

shown. (See note on page 48.)

To end the connection, click Stop .

Connected to NDIS

This message applies only if you have selected Enable NIC for data connections

(page 64). For a description, see “Connected” (above).

Section 3A: Your Sprint Mobile Broadband USB Modem: The Basics 37

Device locked

The device is locked, so that others cannot use the device and your account. To use

most of the features, you must unlock the device (page 52)

.

Device powered off

The device has been powered off (through Menu > Power Off Modem ). To use the device, select Menu > Power On Modem .

For more information, see “Powering the Device On and Off” on page 42.

Searching

The device is requesting GPS satellite information from the network.

38 Section 3A: Your Sprint Mobile Broadband USB Modem: The Basics

System Tray Connection States

Sprint Connection Manager has an associated icon ( ) that appears in the system tray. The icon reflects the connection state.

Sprint Connection Manager is not ready to connect to the network.

Your Sprint Mobile Broadband USB modem is either locked

(“Device locked”; page 38), or not detected (“No device”; page 36),

or powered off (“Device powered off”; page 38).

Disconnected — Sprint Connection Manager is ready to make a

connection to the network (page 36), or

Connecting — Sprint Connection Manager is making a connection

to the network (page 37).

Connected — Connection is established to the network; data

transfer is in progress (page 37).

Dormant — Connection is established, but no data transfer is taking place.

Clicking the system tray icon toggles between displaying and minimizing

Sprint Connection Manager.

Right-clicking the icon displays the shortcut menu (page 58).

Section 3A: Your Sprint Mobile Broadband USB Modem: The Basics 39

Determining the Type of Coverage

The ToolTip over the signal strength indicator ( ) indicates the type of coverage you have (for example, 1X [synonym of 1xRTT] or 1xEV-DO):

Tip: The type of coverage is also displayed in the lower left part of the Device Info

& Diagnostics window under “Network Service” (page 73).

Location-Based Services

Location-Based Services (Location & Search Services) allow you to query the network for information on points of interest that are near your current location.

The network automatically determines your current location. All you have to do is specify the type of business that you are looking for (for example, a restaurant or hotel).

To use Location-Based Services:

䊳 In Sprint Connection Manager, click Menu > Location & Search Services .

Note:

If the menus and windows (page 40 and page 66) related to Location-Based

Services are unavailable in Sprint Connection Manager, see “Location-Based

Services Don't Seem To Be Available” on page 84.

40 Section 3A: Your Sprint Mobile Broadband USB Modem: The Basics

If the GPS fix is successful or if data from a recent GPS fix is available, then the

Sprint Nextel Location & Search window is displayed. The bottom part of the window displays location information (latitude and longitude) of your device, and the time that the location information was acquired.

From the Location & Search window, enter or select the type of item you want to find, and click Go .

If more than a preconfigured period of time has elapsed since the last time you’ve submitted a location search, a window is displayed asking whether you want to get an updated (GPS) position fix. (Depending on your account, you may be charged for each position fix or after you have performed a certain number of fixes.) If your current location is different from where you submitted your last location search, click Yes .

Note: Sprint Connection Manager uses Microsoft Internet Explorer to display the results of Location-Based Services.

Section 3A: Your Sprint Mobile Broadband USB Modem: The Basics 41

Internet Explorer opens and displays the results of your search query. In the search results of some mapping and search services, you can right-click your location to get additional information—for example, driving instructions.

From the Location & Search window, you can submit additional searches.

From the Settings window, you can specify the settings for Sprint Location

Services (page 66).

Powering the Device On and Off

If you are using your Sprint Mobile Broadband USB modem in an aircraft, hospital, or other environment where the device may cause interference, you can power the device off (without removing it from your USB slot), and still use other functions of your computer.

This also allows you to conserve your notebook computer’s battery and charge the device’s battery.

To power the device off:

1.

Close any active data connection (page 49).

2.

Select MENU > Power Off Modem .

When the device is powered off, the menu option switches to Power On Modem , and Sprint Connection Manager displays the message “Device powered off .”

To power the device on:

䊳 Select MENU > Power On Modem .

42 Section 3A: Your Sprint Mobile Broadband USB Modem: The Basics

Controlling the Sprint Connection Manager Window

Expanding Sprint Connection Manager

Sprint Connection Manager has two views: compact and expanded.

Compact view:

To expand Sprint Connection Manager, click . Sprint Connection Manager now also displays the amount of data transferred during the current connection, and

(only when disconnected) the lock state of the device (locked or unlocked ).

Expanded view:

To change back to the compact view, click .

Section 3A: Your Sprint Mobile Broadband USB Modem: The Basics 43

Minimizing Sprint Connection Manager

To save space on your screen for other programs, you can minimize Sprint Connection

Manager:

䊳 Click (in the upper right corner of Sprint Connection Manager).

– or –

Click the Sprint Connection Manager icon in the system tray.

– or –

Right-click the system tray icon and select Close Sprint Mobile Broadband .

You can use the system tray icon to monitor the connection state (page 39).

Tip:

You can set Sprint Connection Manager to start minimized. (See “ Start in system tray ” on page 62.)

Tip: You can prevent Sprint Connection Manager from minimizing by setting

Always on top

(page 62).

Restoring Sprint Connection Manager

To restore Sprint Connection Manager when it is minimized:

䊳 Click the Sprint Connection Manager icon in the system tray.

– or –

Right-click the system tray icon and select Open Sprint Mobile Broadband .

Exiting Sprint Connection Manager

To exit Sprint Connection Manager:

䊳 In Sprint Connection Manager, select Menu > Exit , or click the button,

– or –

Right-click the Sprint Connection Manager icon in the system tray and, from the shortcut menu, select Exit .

If you have not selected Enable NIC for data connections

(page 64) and a connection

is in progress, a window is displayed asking whether you want to disconnect the call. To end the connection and close Sprint Connection Manager, you must click

Yes .

44 Section 3A: Your Sprint Mobile Broadband USB Modem: The Basics

Sprint Connection Manager closes, and the Sprint Connection Manager icon disappears from the system tray.

Note: If you have selected Enable NIC for data connections

(page 64), after exiting

Sprint Connection Manager, you are still connected to the network (data may still be transferred). To manage the connection, use the Windows network connection icon in the system tray.

Launching a Sprint Power Vision or Sprint Vision

Connection

To launch a connection:

䊳

In Sprint Connection Manager, click GO . (If GO

is unavailable, see “GO Button Is

Unavailable” on page 82.)

Note: A connection is automatically established if, after you select Menu >

Location & Search Services , a GPS fix is successfully acquired.

When the connection is successfully established, the network welcome screen appears (unless you have turned off the display of the welcome screens; see

“ Always show Welcome Screens ” on page 64).

Sprint Connection Manager displays “Connected” or “Connected to NDIS”

(page 37).

You can now use your Web browser, perform data transfers, and so on.

Section 3A: Your Sprint Mobile Broadband USB Modem: The Basics 45

To monitor the status of the connection, you can use the text (page 35) and icons

(page 33) in Sprint Connection Manager, and the icon in the system tray (page 39).

You can also view the amount of data transferred (page 48).

Tip: You can optionally specify which application to automatically launch when

the connection is established. (See “Auto-launch Upon Network

Connection” on page 47.)

You can also set the connection to launch automatically whenever

available. (See “ GO automatically when ready ” on page 64.) If you also set

Sprint Connection Manager to launch automatically (see “ Launch

Connection Manager automatically ” on page 62), this can provide an

“always-on” connection, as long as you have network coverage.

You can have a connection established automatically—without running

Sprint Connection Manager—simply by starting whatever application you want to use (such as your Web browser or email application). Select Enable

NIC for data connections and GO automatically when ready

(page 64). However,

Sprint Connection Manager and its icon in the system tray won’t be available for you to monitor the status of the connection. Location-Based

Services also won’t be available.

Roam Guard

The Roam Guard feature, when enabled, displays a warning message if you are roaming and a data connection is established or about to be established. The message reminds you that roaming rates may apply.

46

From the window with the warning message, you can:

䢇 Turn off the warning message for this data session only ("Do not ask again during this data session").

䢇 Continue with the data connection ("Roam") (in which case you may be subject to roaming rates).

䢇 End the data connection ("Cancel").

Section 3A: Your Sprint Mobile Broadband USB Modem: The Basics

Note: This feature is available only if Roam Mode is set to Automatic (from the

Sprint Vision option of the Settings window; page 63).

To turn on the Roam Guard feature:

1.

From the Sprint Vision option of the Settings window, ensure Roam Mode is set to Automatic .

2.

Select Roam Guard .

To permanently turn off the Roam Guard feature:

䊳 From the Sprint Vision option of the Settings window, clear Roam Guard .

Auto-launch Upon Network Connection

You can optionally specify which application to automatically launch when a

Sprint Power Vision or Sprint Vision connection is established.

To specify which application to automatically launch:

1.

Ensure Sprint Connection Manager is running and not locked (page 51).

2.

Ensure that your Sprint Mobile Broadband USB modem is not powered off

(page 38).

3.

Select MENU > Settings > Sprint Vision - Sierra Wireless .

4.

Select Auto Launch .

5.

In the Auto-Launch Options window, select one of the following:

䡲 None — Do not auto-launch any application.

䡲 Website — Auto-launch Internet Explorer. In the URL field, specify the Web site (such as http://www.sierrawireless.com) you want to view on connection.

䡲 Microsoft VPN (PPTP) Connection — Auto-launch a Windows VPN connection.

Type in the address of the VPN connection, or, from the drop-down list, select the VPN connection.

䡲 Application (VPN client, etc.) — Auto-launch an installed VPN program, or any other program. In the field, enter the path to the program, or use the

Browse button to locate the program.

The changes are applied the next time you launch a connection.

Note: This feature functions only when Sprint Connection Manager is running.

Section 3A: Your Sprint Mobile Broadband USB Modem: The Basics 47

Viewing the Amount of Data Transferred

Note: Even though the number of bytes sent and received is displayed while the connection is running, this is not necessarily the actual amount of data being transmitted across the network. Do not use this information to estimate billing.

If you have selected Enable NIC for data connections

(page 64), after exiting

Sprint Connection Manager, you are still connected to the network. Data may still be transferred.

To view the number of bytes sent/received during the current connection:

䊳 If Sprint Connection Manager is not expanded, click the button.

The number of bytes sent/received during the current connection is displayed, in three significant digits (such as 581 kb, 1.23 Mb, 1.81 Mb).

Once you end the connection, the figures reset to zero.

To hide the part of Sprint Connection Manager that displays this information, click the button.

48 Section 3A: Your Sprint Mobile Broadband USB Modem: The Basics

Ending a Connection

To end a connection:

䊳 In Sprint Connection Manager, click Stop .

If you have not selected Enable NIC for data connections

(page 64) and you exit

Sprint Connection Manager while a connection is in progress, a window is displayed asking whether you want to disconnect the call. By clicking Yes , you can

end the connection and exit Sprint Connection Manager. (See “Exiting

Sprint Connection Manager” on page 44.)

If you have enabled GO automatically when ready , manually disconnecting will leave the device disconnected. It will not reconnect until one of the following occurs:

䢇 You make a connection through Sprint Connection Manager

䢇 A GPS fix is successfully acquired after you initiate Location-Based Services

(page 40)

䢇 You have selected Enable NIC for data connections and you remove and reinsert the device

䢇 You have not selected Enable NIC for data connections and you restart

Sprint Connection Manager

Online Help

Sprint Connection Manager includes extensive online help to provide operating hints and step-by-step instructions for getting the most from your Sprint Mobile

Broadband USB modem.

With Sprint Connection Manager running, you can access online help in several ways:

䢇 Press <F1> in any window.

䢇 From the Sprint Connection Manager window, select MENU > Help .

䢇 Right-click the system tray icon ( ) and select Help .

䢇 Click the Help button available in many windows.

The help file has a table of contents and an index.

Section 3A: Your Sprint Mobile Broadband USB Modem: The Basics 49

Displaying Your Phone Number

You can view your phone number in the Device Info & Diagnostics window

( Menu > Device Info & Diagnostics ).

Security

When it is disconnected, you can lock your Sprint Mobile Broadband USB modem so that others cannot use the device and your account. A four-digit lock code is needed to unlock the device.

You can set the Sprint Mobile Broadband USB modem to lock:

䢇

Whenever Sprint Connection Manager is started (page 51), or

䢇 Immediately (without restarting Sprint Connection Manager) — useful if you are lending your Sprint Mobile Broadband USB modem and PC or leaving it for a

short time (page 51).

Initial Lock Code

The initial lock code value is determined by your service provider.

For service provider configurations that do not require account activation, a default lock code is set at the factory to a value determined by the service

provider. For assistance, contact Sprint (page 27).

Configurations that use the Activation Wizard set the initial lock code to the last four digits of your account phone number whenever a new phone number is activated.

After activation, you can change the lock code (page 53) from the initial value to

any four-digit code you choose. (See “Warning Regarding the Lock Code” below.)

Note: The security lock code is reset to the last four digits of the phone number whenever an account is activated. This may change a custom value you have set.

Warning Regarding the Lock Code

If you lock the Sprint Mobile Broadband USB modem and forget the lock code, you will not be able to use the device until you receive assistance from Sprint.

50 Section 3A: Your Sprint Mobile Broadband USB Modem: The Basics

When the Sprint Mobile Broadband USB Modem Is Locked

When the Sprint Mobile Broadband USB modem is locked, you can:

䢇

Unlock the device (page 52).

䢇

Power off the device (page 42).

When the device is locked, you cannot:

䢇

Make data connections (the GO button is unavailable).

䢇

Use Location-Based Services.

䢇

Run the Activation Wizard.

Locking the Device

Warning: If you forget the lock code, you will not be able to use the device until you receive assistance from Sprint.

To lock the Sprint Mobile Broadband USB modem immediately:

1.

End any active connection. (You can lock the device only when it is

disconnected; page 36.)

2.

If Sprint Connection Manager is not expanded, click to expand it.

3.

Click the icon.

4.

In the Enter User Lock Code window, enter the lock code, and click OK .

When the device is locked, Sprint Connection Manager displays “Device locked,” and the lock icon is now . The GO button is unavailable.

Tip: You can also set the device to be locked upon startup of Sprint Connection

Manager, as described next.

Locking Upon Sprint Connection Manager Startup

To set the Sprint Mobile Broadband USB modem to lock as soon as Sprint Connection

Manager starts up:

1.

End any active connection. (You can lock the device only when disconnected;

see page 36.)

2.

If Sprint Connection Manager is not expanded, click to expand it.

3.

Click the lock icon ( or , depending on the current lock status).

Section 3A: Your Sprint Mobile Broadband USB Modem: The Basics 51

4.

In the Enter User Lock Code window, enter the lock code, and select Relock modem when program exits .

5.

Click OK .

Note: This setting takes effect only after you exit and restart Sprint Connection

Manager.

Unlocking the Device

When the device is locked, Sprint Connection Manager displays “Device locked,” and the lock icon is .

To unlock the device:

1.

If Sprint Connection Manager is not expanded, click to expand it.

2.

Click the icon.

3.

In the Enter User Lock Code window, enter the lock code, and click OK .

When the device is unlocked, Sprint Connection Manager no longer displays

“Device locked,” and the lock icon is .

52 Section 3A: Your Sprint Mobile Broadband USB Modem: The Basics

Changing the Lock Code

Warning: If you forget the lock code, you will not be able to use the device until you receive assistance from Sprint.

To change the lock code:

1.

In the Sprint Vision settings window, click User Lock Change .

The Change User Lock Code window is displayed:

2.

Enter the current lock code.

3.

Enter a new four-digit lock code.

4.

Enter the new lock code for confirmation.

5.

Click OK .

Accessing Links

For your convenience, Sprint Connection Manager includes links to Sprint products and services. To access these links:

1.

In Sprint Connection Manager, click Menu .

2.

Select Links .

Note: You cannot add or remove links from the Links menu. To add or remove links, use your Web browser.

Section 3A: Your Sprint Mobile Broadband USB Modem: The Basics 53

Uninstalling the Sprint Connection Manager Software

To remove the Sprint Connection Manager software from your computer, use the

Add/Remove Programs utility built into your Windows operating system.

1.

Exit Sprint Connection Manager (page 44).

2.

Remove the Sprint Mobile Broadband USB modem. (See “Removing the

Sprint Mobile Broadband USB Modem” on page 20.)

3.

Select Start > Control Panel and select:

(Windows Vista) Programs and Features .

(Windows XP or Windows 2000) Add/Remove Programs .

The Windows Add/Remove Programs utility will start. Be sure the Change or

Remove Programs feature is selected (default).

4.

From the list, select Sprint Mobile Broadband (Sierra) , and click Remove or

Uninstall .

54 Section 3A: Your Sprint Mobile Broadband USB Modem: The Basics

S e c t i o n 3 B

Menu Options

In This Section

⽧

Sprint Connection Manager Menu

⽧

System Tray Menu

This chapter describes each menu option you may encounter while using your

Sprint Mobile Broadband USB modem and the Sprint Connection Manager software.

Section 3B: Menu Options 55

Sprint Connection Manager Menu

Clicking Menu or the button, located in the upper left corner of

Sprint Connection Manager, displays the Sprint Connection Manager menu.

56

Note: Depending on your configuration and settings, not all menu options may be shown or enabled as described here.

Tip: You can also display the menu by positioning the cursor over the Menu text or button and then pressing the spacebar or Enter key on your keyboard.

To hide the menu, press Esc , or click outside the menu.

The following table describes the menu options:

Menu Item

Alert Log

Connection

History

Description

View a record of all alerts (for example, connection errors) that have been received while establishing and maintaining connections.

See “Viewing Alerts” on page 71.

View a record of connections established using your

Sprint Mobile Broadband USB modem (unavailable if the

Connection History is empty, or if Keep Connection History

[page 62] is not selected).

See “Viewing the Connection History” on page 70.

Section 3B: Menu Options

Menu Item

Device Info &

Diagnostics

Power Off

Modem

Location &

Search

Services

Software

Updates

Links

Help

About

Sprint Mobile

Broadband

Settings

Exit

Description

View information about your Sprint Mobile Broadband

USB modem and run diagnostic tests.

See “Running Diagnostics” on page 72.

Power off your Sprint Mobile Broadband USB modem.

See “Powering the Device On and Off” on page 42.

Query the network for information on points of interest that are near your current location.

See “Location-Based Services” on page 40.

Retrieve updates for Sprint Connection Manager and your

Sprint Mobile Broadband USB modem.

See “Updating the Software” on page 74.

Access links to Sprint products and services.

See “Accessing Links” on page 53.

Display the online Help, which has operating hints and stepby-step instructions for getting the most from your

Sprint Mobile Broadband USB modem.

See “Online Help” on page 49.

Display brief information about the Sprint Connection

Manager software. To close the window, click anywhere inside it.

See “About Sprint Mobile Broadband” on page 75.

Change the settings for Sprint Connection Manager. Contains submenu items:

䢇

General

: See “General Settings” on page 61.

䢇

Sprint Vision - Sierra Wireless

: See “Sprint Vision Settings” on page 63.

䢇

Sprint Location Services

: See “Sprint Location Services

Settings” on page 66.

Exits Sprint Connection Manager.

Section 3B: Menu Options 57

System Tray Menu

When you right-click the system tray icon ( ), a shortcut menu is displayed:

The following table describes the menu options:

Menu Item

Open/Close

Sprint Mobile

Broadband

Help

About

Sprint Mobile

Broadband

Exit

Description

Minimize Sprint Connection Manager ( Close ), or restore

( Open ) if Sprint Connection Manager is minimized.

Display the online Help.

Display brief information about the Sprint Connection

Manager software. To close the window, click anywhere inside it.

Exit Sprint Connection Manager.

58 Section 3B: Menu Options

S e c ti o n 3 C

Changing the Settings of Sprint Connection Manager

In This Section

⽧

Settings Window

⽧

General Settings

⽧

Sprint Vision Settings

⽧

Sprint Location Services Settings

This chapter describes the windows from which you can change the settings for

Sprint Connection Manager.

Section 3C: Changing the Settings of Sprint Connection Manager 59

Settings Window

Note:

Temporarily unavailable, if you have powered off the device (page 42).

From the Settings window, you can specify the settings for Sprint Connection

Manager.

1.

In Sprint Connection Manager, click Menu .

2.

Select Settings .

3.

From the drop-down list, select one of the following categories of settings:

䡲 General (general behavior of Sprint Connection Manager)

䡲 Sprint Vision - Sierra Wireless (behavior of your Sprint Power Vision/

Sprint Vision connection)

䡲 Sprint Location Services

4.

Make the appropriate changes to the settings (described in the following pages).

5.

To change other settings, repeat steps 3 and 4.

6.

Click OK .

Note: Changes to the setting Launch Connection Manager automatically apply only after you restart Windows. Changes to the setting Start in system tray apply only after you exit and restart Sprint Connection Manager.

Tip: You can also access the Settings window from the Connection History

window (page 70): click

File > Settings .

60 Section 3C: Changing the Settings of Sprint Connection Manager

General Settings

From the General option of the Settings window, you can specify settings that affect the general behavior of Sprint Connection Manager.

Section 3C: Changing the Settings of Sprint Connection Manager 61

The following table describes the options:

Menu Item

Play sound effects

Always on top

Start in system tray

Description

Play a clicking sound whenever an action is made in

Sprint Connection Manager.

Keep Sprint Connection Manager visible on your screen regardless of which applications are open.

Have Sprint Connection Manager start (minimized) in the system

tray on startup. (See “Restoring Sprint Connection Manager” on page 44.)

Have Sprint Connection Manager keep a log of your data

connections (page 70).

Keep

Connection

History

Launch

Connection

Manager automatically

Have Sprint Connection Manager start automatically (when your device is detected).

Tip: You can also set the Sprint Power Vision or Sprint Vision

connection to launch automatically whenever available (see “ GO automatically when ready ” on page 64). These settings provide an

“always-on” connection, as long as you have network coverage.

Have Sprint Connection Manager automatically check for

software updates (page 74).

Check for updates once per month

Check Now Check for software updates immediately.

Note: During the software update, Sprint Connection Manager will close. Before you initiate the software update, finish any Web browsing, data transfers, and so on.

Note: Changes to the setting Launch Connection Manager automatically apply only after you restart Windows. Changes to the setting Start in system tray apply only after you exit and restart Sprint Connection Manager.

62 Section 3C: Changing the Settings of Sprint Connection Manager

Sprint Vision Settings

From the Sprint Vision option of the Settings window, you can change the behavior of your Sprint Power Vision or Sprint Vision connection.

Section 3C: Changing the Settings of Sprint Connection Manager 63

The following table describes the options:

Menu Item

Always show

Welcome

Screens

GO automatically when ready

Enable NIC for data connections

Network

Mode:

Automatic

Network

Mode:

1xEV-DO

Only

Network

Mode:

1X Only

Roam Mode:

Sprint

Description

Display a welcome screen upon a successful connection to the network.

Automatically connect to the network after Sprint Connection

Manager starts, or whenever Sprint Connection Manager loses the network connection.

Tip: You can also set Sprint Connection Manager to start

automatically (see “ Launch Connection Manager automatically ” on page 62). These settings provide an “always-on” connection, as long

as you have network coverage.

You can have a connection established automatically, without having to run Sprint Connection Manager. Select Enable NIC for data connections (below) and GO automatically when ready .

Make a connection automatically, without running

Sprint Connection Manager—simply by starting whatever application you want to use (such as your Web browser or email application).

Note: GO automatically when ready must also be selected.

Location-Based Services are available only when Sprint Connection

Manager is running.

Attempt a Sprint Power Vision (1xEV-DO) connection and, if not successful, attempt the slower Sprint Vision (1X) connection.

Attempt only a Sprint Power Vision (1xEV-DO) connection.

Note: When in an area that has only Sprint Vision (1X) coverage, you won’t be able to connect to the network.

Attempt only a Sprint Vision (1X) connection (even when you are in Sprint Power Vision [1xEV-DO] coverage, which provides faster data transmission speeds).

Note: When in an area that has only Sprint Power Vision (1xEV-DO) coverage, you won’t be able to connect to the network.

Disable roaming when Sprint coverage is unavailable. You will be able to connect only when Sprint coverage is available.

64 Section 3C: Changing the Settings of Sprint Connection Manager

Menu Item

Roam Mode:

Automatic

Roam Mode:

Roam Only

Roam Mode:

Roam Guard

Activation

Wizard

User Lock

Change

Auto Launch

Description

Allow roaming when Sprint coverage is unavailable.

Note:

Roaming rates may apply. Roam Guard (page 46) can remind

you of this.

Allow only roaming.

Note:

Roaming rates may apply. Roam Guard (page 46) can remind

you of this.

Display a warning message when you are about to establish a data connection while roaming. For more information, see

“Roam Guard” on page 46.

Available only if Roam Mode is set to Automatic (page 65).

Note: If you proceed with the data connection, roaming rates may apply.

Used only when activating a Sprint Mobile Broadband USB modem, or when changing your device’s phone number

(page 23).

Change the security lock code of the Sprint Mobile Broadband

USB modem (page 53).

Optionally specify which application to automatically launch when a connection is established.

See “Auto-launch Upon Network Connection” on page 47.

Section 3C: Changing the Settings of Sprint Connection Manager 65

Sprint Location Services Settings

From the Sprint Location Services option of the Settings window, you can change the behavior of the Location-Based Services. (For more information on Location-

Based Services, see page 40.)

66 Section 3C: Changing the Settings of Sprint Connection Manager

The following table describes the options:

Menu Item

Enable

Location on

Device

Display

'Location &

Search

Services' on the menu

Do not show

Privacy

Consent

Agreement for 'Location

& Search

Services' menu

Microsoft Live

MapQuest

Yahoo! Maps

Google Maps

Description

Turn on support (by your device) for Location-Based Services.

Note: To use Location-Based Services, your account must also be configured appropriately. If you are unable to use Location-Based

Services, contact Sprint Customer Service (page 27).

Show or hide the Sprint Connection Manager menu item that displays the Sprint Nextel Location & Search window. For

more information on this window, see “Location-Based

Services” on page 40.

Note: If you hide this menu item, you won’t be able to access Location-

Based Services .

Prevent a Privacy Consent Agreement window from appearing every time you invoke Location-Based Services.

Specify which mapping and search service (for example,

Microsoft® Live, or Google™ Maps) Internet Explorer uses for

Location-Based Services.

Some mapping and search services may have data that is more current or accurate than that of other mapping and search services.

Section 3C: Changing the Settings of Sprint Connection Manager 67

Menu Item

Test GPS

Description

Verify that your device is able to obtain data for Location-

Based Services.

The results (including the number of satellites, latitude, longitude, and elevation information) are displayed to the right of the Test GPS button.

68 Section 3C: Changing the Settings of Sprint Connection Manager

S e c t i o n 3 D

Tools

In This Section

⽧

Viewing the Connection History

⽧

Viewing Alerts

⽧

Running Diagnostics

⽧

Updating the Software

⽧

About Sprint Mobile Broadband

This chapter describes various features you can use to view information about the

Sprint Mobile Broadband USB modem and the Sprint Connection Manager software.

Section 3D: Tools 69

Viewing the Connection History

Connection History displays a record of connections established using your

Sprint Mobile Broadband USB modem. You can sort records by connection name to easily distinguish between personal and business usage.

From this window you can also access the Settings window (page 60) (

File >

Settings ).

Note: For connections to be recorded, Keep Connection History must be enabled

(page 62).

To view the Connection History:

1.

In Sprint Connection Manager, click Menu .

2.

Select Connection History .

To sort the entries:

䊳 Click the button that contains the title of the column you want to sort by. (You can reverse the sort order by clicking the button again.)

– or –

Click an option under the Sort menu.

To export the entries to a text file:

1.

Select File > Export .

2.

Specify a file name and path.

3.

Click Save .

To copy one or more entry:

1.

Select the entries. (Click a single entry, or use Ctrl-click or Shift-click to select multiple entries; to select all entries, use Edit > Select All .)

2.

Select Edit > Copy .

3.

Paste the entries (for example, into a text file or email message).

70 Section 3D: Tools

To delete all entries:

䊳

Click the Clear button.

To delete one or more entry:

1.

Select the entries. (Click a single entry, or use Ctrl-click or Shift-click to select multiple entries.)

2.

Select Edit > Delete .

Viewing Alerts

The Alert Log displays a record of all alerts (for example, connection errors) that have been received while establishing and maintaining connections. You can use the Alert Log to help isolate and resolve connection issues.

To view the Alert Log:

1.

In Sprint Connection Manager, click Menu .

2.

Select Alert Log . (This menu option is unavailable if the alert log is empty.)

To sort the entries:

䊳

Click the button that contains the title of the column you want to sort by. (You can reverse the sort order by clicking the button again.)

– or –

Click an option under the Sort menu.

To export the entries to a text file:

1.

Select File > Export .

2.

Specify a file name and path.

3.

Click Save .

Section 3D: Tools 71

To copy one or more entry:

1.

Select the entries. (Click a single entry, or use Ctrl-click or Shift-click to select multiple entries; to select all entries, use Edit > Select All .)

2.

Select Edit > Copy .

3.

Paste the entries (for example, into a text file or email message).

To delete all entries:

䊳 Click the Clear button.

To delete one or more entry:

1.

Select the entries. (Click a single entry, or use Ctrl-click or Shift-click to select multiple entries.)

2.

Select Edit > Delete .

Running Diagnostics

To identify problems when connecting to the network, use the Device

Info & Diagnostics window. Device Info & Diagnostics evaluates issues with your

USB port, port configuration, network signal strength, Sprint Connection

Manager, and more. Once the program runs a diagnostics check, it recommends solutions.

The program also displays information such as your phone number.

Results of the diagnostics can be shared with a Sprint Customer Service Specialist, to assist that person with troubleshooting.

To access the Device Info & Diagnostics window:

1.

Ensure the Sprint Mobile Broadband USB modem is inserted.

2.

In Sprint Connection Manager, click Menu .

3.

Select Device Info & Diagnostics .

72 Section 3D: Tools

The tests automatically start when the window opens.

From the Device Info & Diagnostics window, you can view system information

(page 74) and save the system information to an RTF file.

From the Device Info & Diagnostics window, you can also update parameters in your Sprint Mobile Broadband USB modem:

䊳

Click Update Data Profile . (If this button is not displayed, remove and reinsert the device.)

Section 3D: Tools 73

Displaying System Information

The System Information window displays:

䢇 System Parameters: Information about your computer hardware and software.

䢇 Installed Files : Files related to Sprint Connection Manager.

䢇 Device Info & Diagnostics : Information about the Sprint Mobile Broadband USB modem (including its phone number), and results of various tests.

To display system information:

1.

Select Menu > Device Info & Diagnostics .

2.

In the Device Info & Diagnostics window, click System Information .

To save the information to a file (for example, if you are requested to send the report to your service provider representative):

1.

In the System Information window, click Create Report .

2.

Specify a file name and path.

3.

Click Save .

Updating the Software

From time to time, Sprint may release updates for Sprint Connection Manager and your Sprint Mobile Broadband USB modem. These updates may add features or improve network performance.

Note: During the software update, Sprint Connection Manager will close. Before you initiate the software update, finish any Web browsing, data transfers, and so on.

To update the software:

1.

Ensure you have a network connection.

2.

In Sprint Connection Manager, click Menu . Select Software Updates .

– or –

From the General option of the Settings window (page 60), click

Check Now .

You can also set the software to automatically check for updates once a month:

1.

In Sprint Connection Manager, click Menu and then select Settings .

2.

Select Check for updates once per month .

74 Section 3D: Tools

About Sprint Mobile Broadband

The About Sprint Mobile Broadband window displays information about the

Sprint Connection Manager software.

To display this window:

䊳

In Sprint Connection Manager, click Menu and then select About Sprint Mobile

Broadband .

– or –

Right-click the Sprint Connection Manager icon ( ) in the system tray and, from the shortcut menu, select About Sprint Mobile Broadband .

To close this window, click anywhere inside it.

Tip:

To display more information, you can run diagnostics (page 72).

Section 3D: Tools 75

Frequently Asked Questions

In This Section

⽧

What is Sprint Connection Manager?

⽧

If the connection is “always on,” am I always being billed?

⽧

How fast is the connection with Sprint Connection Manager?

⽧

Can I connect to a dial-up account like AOL or EarthLink?

⽧

How do I get the location-enhanced Local Search feature?

⽧

Where do I find the location-enhanced Local Search feature?

⽧

How do I use the location-enhanced Local Search feature?

⽧

Where can I use GPS?

⽧

Once I connect to the network, how do I access my corporate network through a VPN?

⽧

How can I optimize my settings to achieve the fastest speeds and conserve data when accessing my corporate network?

⽧

Why won’t my laptop go into hibernation mode when using my

Sprint Mobile Broadband USB Modem?

S e c t i o n 3 E

76 Section 3E: Frequently Asked Questions

What is Sprint Connection Manager?

Sprint Connection Manager is software that lets you connect to the Sprint Power

Vision or Sprint Vision network. Sprint Connection Manager takes advantage of the increased data speeds offered by the Sprint Mobile Broadband Network.

If the connection is “always on,” am I always being billed?

No. The connection to the network goes dormant after a period of inactivity, but the connection can be re-established faster than having to reconnect. Billing occurs only when data is passed across the network.

How fast is the connection with Sprint Connection

Manager?

The Sprint Mobile Broadband Network allows you to connect to the Internet at speeds of up to 3.1 Mbps (1xEV-DO Rev. A), 2.4 Mbps (1xEV-DO Rev. 0), or 144 kbps

(1X). Average connection speeds are:

For 1xEV-DO Rev. A: between 450 and 800 kbps downlink from the network, and between 300 and 400 kbps uplink to the network;

For 1xEV-DO Rev. 0: between 400 and 700 kbps downlink from the network, and between 40 and 80 kbps uplink to the network;

For 1X: between 40 and 80 kbps.

These speeds are faster than dial-up connection speeds.

Can I connect to a dial-up account like AOL or EarthLink?

No. The software does not support dial-up connections.

How do I get the location-enhanced Local Search feature?

The location-enhanced Local Search feature works only with GPS-capable data cards and the latest version of Sprint Connection Manager. The feature is available at no additional charge in the latest version of Sprint Connection

Manager.

Section 3E: Frequently Asked Questions 77

Where do I find the location-enhanced Local Search feature?

In Sprint Connection Manager, select Menu > Location & Search Services .

How do I use the location-enhanced Local Search feature?

When running Sprint Connection Manager, select Menu > Location & Search

Services . Some predefined, most frequently used queries are listed. There is also an option to run your own custom query.

Where can I use GPS?

GPS works wherever there is both Sprint CDMA network access and GPS access.

Note: In some locations where CDMA network access is available, GPS may not be available at this time. For the latest on service available by location, refer to Sprint Nextel Coverage maps.

Once I connect to the network, how do I access my corporate network through a VPN?

Once you complete a wireless connection, you may need to launch an extranet client provided by your company and supply the appropriate username and password to gain access. For support, contact your company help desk.

How can I optimize my settings to achieve the fastest speeds and conserve data when accessing my corporate network?

Depending on your corporate email client, you can optimize your settings by doing the following:

䢇 Work in “offline” mode, and connect only when you need to send or receive email.

䢇 Remove the Preview Pane, or use the AutoPreview for headers only.

78 Section 3E: Frequently Asked Questions

䢇 Save attachments to a desktop folder and then open from that folder, rather than opening the attachment directly from the message.

For more information, access the Microsoft white paper at: www.microsoft.com/office/outlook/evaluation/perform.doc

.

Why won’t my laptop go into hibernation mode when using my Sprint Mobile Broadband USB Modem?

If you’re using Windows 2000, you need to upgrade to Service Pack 4 from www.microsoft.com

.

Section 3E: Frequently Asked Questions 79

S e c ti o n 3 F

Troubleshooting Tips

In This Section

⽧

Problems, Causes, and Solutions

⽧

GO Button Is Unavailable

⽧

Searching for Service

⽧

Cannot Connect to the Network

⽧

Power LED Goes Off and On, and Then Stays Red

⽧

Location-Based Services Don't Seem To Be Available

⽧

Could Not Prepare Data Services

⽧

Unable To Prepare Data Services

⽧

Sprint Connection Manager Stops Working After Upgrading Windows

This section helps you diagnose and solve common problems you may experience while using your Sprint Mobile Broadband USB modem and the Sprint Connection

Manager software.

80 Section 3F: Troubleshooting Tips

Problems, Causes, and Solutions

When properly installed, the Sprint Mobile Broadband USB modem is a highly reliable product.

Most problems are caused by one of these issues:

䢇

Network coverage is not available (because of your “Network Mode” settings

[page 63], or because you are outside the network, or because of an account or

network problem).

䢇

The drivers were not properly installed because of a problem with your computer’s USB slot.

䢇

System resources required by the device are being used by other devices.

Tips when troubleshooting problems with your Sprint Mobile Broadband USB modem and software:

䢇

Ensure your device is inserted, not locked (page 51), and not powered off

(page 38).

䢇 Ensure the Power LED is green.

䢇

To determine the connection status, use the icons in the system tray (page 39),

and icons and messages in Sprint Connection Manager (page 33 and page 35).

䢇

The alert log might indicate the nature of the problem (page 71).

䢇

Run diagnostic tools supplied with Sprint Connection Manager (page 72).

䢇

Check the Frequently Asked Questions (page 76).

䢇

Use the resources listed in “Getting Help” (page 26).

䢇 Has Sprint Connection Manager stopped working after you’ve upgraded to a

different version of Windows (page 85)?

If, after reading this section, you are unable to resolve a problem, please visit www.sprint.com

or contact Sprint Customer Service. (See “Getting Help” on page 26.)

Section 3F: Troubleshooting Tips 81

GO Button Is Unavailable

Ensure the Sprint Mobile Broadband USB modem is properly inserted, not locked

(page 51), and not powered off (page 38).

If Sprint Connection Manager displays “Searching for service” for a long period of

time (for example, several minutes), see “Searching for Service” below.

If Roam Mode (from the Sprint Vision option of the Settings window) is set to

Sprint

, ensure you are not roaming, or change the setting (page 64). (You may be

subject to roaming rates.)

Searching for Service

If Sprint Connection Manager displays “Searching for service” for a long period of time (for example, several minutes), try one of the following:

䢇 Try reorienting your computer, or try adjusting the angle of the device’s USB

connector (see the picture on page 17).

䢇 If you are inside a building or near a structure that may be blocking the signal, change the position or location of your computer.

䢇 If Roam Mode (from the Sprint Vision option of the Settings window) is set to

Sprint , ensure you are within the network coverage area, or change the Roam

Mode setting. (You may be subject to roaming rates.)

䢇 If Roam Mode (from the Sprint Vision option of the Settings window) is set to

Roam Only , ensure you are roaming, or change the Roam Mode setting.

䢇 If Network Mode (from the Sprint Vision option of the Settings window) is set to

1X Only , and only 1xEV-DO coverage is available, either move to an area that has 1X coverage, or change the setting to Automatic or 1xEV-DO Only .

䢇

If Network Mode (from the Sprint Vision option of the Settings window) is set to

1xEV-DO Only , and only 1X coverage is available, either move to an area that has 1xEV-DO coverage, or change the setting to Automatic or 1X Only .

䢇 Check with Sprint — a network or account problem may be preventing the

Sprint Mobile Broadband USB modem from obtaining service.

82 Section 3F: Troubleshooting Tips

Cannot Connect to the Network

If you're having problems connecting, or there's no Sprint Power Vision (1x-EVDO) coverage in your area, set Network Mode (from the Sprint Vision option of the

Settings window) to 1X Only , and try to establish a connection.

If the connection is dropped as soon as it is established:

䊳

Charge the battery for at least 30 minutes if the Power LED is red. (If the connection still gets dropped as soon as it is established, continue with the following steps.)

– or –

1.

Select:

(Windows Vista) Start > Control Panel > Network and Sharing Center >

Manage Network Connections

(Windows XP) Start > Control Panel > Network Connections

(Windows 2000) Start > Settings > Control Panel > Network and Dial-Up

Connections

2.

Right-click Sprint Vision - Sierra Wireless , and select Properties .

3.

Select:

(Windows Vista) Options , and select PPP Settings .

(Windows XP) Networking tab, and select Settings .

4.

Ensure that “Enable LCP Extensions” is selected and “Negotiate multi-link for single link connections” is not selected.

5.

Click OK .

Power LED Goes Off and On, and Then Stays Red

This situation may occur under extreme usage conditions when you’re transmitting data in a coverage area with a weak signal.

1.

Wait until the Power LED turns green.

2.

Resume your connection.

䊳 If the Power LED still goes off, and then comes on again and stays red, charge the battery for at least 30 minutes.

Section 3F: Troubleshooting Tips 83

Location-Based Services Don't Seem To Be Available

If the menus or windows related to Location-Based Services are unavailable in

Sprint Connection Manager:

䊳

In the Settings window (page 60), check whether the drop-down list has a

Sprint Location Services option.

If the drop-down list does not have the Sprint Location Services option, then your account, your device, or both are not configured to support Location-Based

Services; contact Sprint Customer Service (page 27).

If the drop-down list has the Sprint Location Services option, select it and ensure that Enable Location on Device and Display 'Location & Search Services' on the menu are selected.

Could Not Prepare Data Services

See “Unable To Prepare Data Services” (page 84).

Unable To Prepare Data Services

Note: The message may appear as “Could not prepare data services. Please contact...”

The Sprint Mobile Broadband USB modem was unable to access the IOTA server to obtain data account parameters for you. This may be because the signal strength is poor or because the IOTA server is not responding.

䢇

Confirm you have sufficient signal strength. Try the actions listed for

“Searching for Service” (page 82).

䢇

Contact Sprint for assistance (page 27).

This message may indicate that your system does not support 128-bit encryption for high-security access to data provisioning. You will not be able to complete the

activation of data services until you upgrade your system’s security. (See “High

Encryption Requirements” on page 9.)

84 Section 3F: Troubleshooting Tips

Sprint Connection Manager Stops Working After

Upgrading Windows

Note: After the following steps, any changes you made to Sprint Connection

Manager settings will be lost; you will have to re-apply the changes.

If you’ve upgraded Windows, and Sprint Connection Manager stopped working:

1.

Uninstall Sprint Connection Manager (page 54).

2.

Reinstall Sprint Connection Manager (page 15).

Section 3F: Troubleshooting Tips 85

86

Section 4

Technical Specifications and

Regulatory Information

88

S e c t i o n 4 A

Technical Specifications

In This Section

⽧

LED Operation

⽧

Radio Frequency and Electrical Specifications

⽧

Software Specifications

⽧

Environmental Specifications

⽧

Mechanical Specifications

This section describes the LED and various specifications of your Sprint Mobile

Broadband USB modem.

Section 4A: Technical Specifications 89

LED Operation

Your device has two LED lights. The LEDs operate as follows:

LED

Data

Power

State

Off

Solid green

Green, blinking slowly

Green, blinking rapidly

Off

Indicates

The device has no power. The device may not be completely inserted into the computer, the computer may be in suspend mode (which powers down the device), or you have powered the device

off (page 42).

The device has power, has found a signal, and is ready to connect.

The device is powering up, or no service is available.

See “Searching for Service” on page 82.

The device is sending or receiving data.

Red

Green

The device has no power. The device may not be completely inserted into the computer, the computer may be in suspend mode (which powers down the device), or you have powered the device

off (page 42).

The device has power; the battery is low.

Charge the battery by inserting the device into the

USB slot of your computer. Alternatively, insert the device into the docking station, and attach the docking station to your computer.

The device has power; the battery is charged.

90 Section 4A: Technical Specifications

Radio Frequency and Electrical Specifications

Approvals

Voltage

Current

Compliant with:

IS-2000 Release 1.0 (CDMA (1X), IS-707-A Data, IS-856

(CDMA 1xEV-DO), IS-866, IS-878, IS-890,

CDMA Development Group

FCC (ID: N7N-MC5725U)

Industry Canada (ID: 2417C-MC5725U)

+5.0 Vdc from USB slot

Maximum:   500 mA (from USB port)

Typical data call current (talk mode), at 3.3 V:

285 mA (1X)

295 mA (1xEV-DO)

Standby: 2.75 mA (1xEV-DO/IS-2000 hybrid mode), at 3.3 V

200 mW (+23 dBm) Transmitter power

Transmit

Receive

PCS: 1805 to 1870 MHz

Cellular:   824 to 849 MHz

PCS:   1715 to 1780 MHz

Cellular:   868 to 894 MHz

GPS:   1575.42 MHz

1.25 MHz Channel spacing

Frequency stability

±150 Hz

Section 4A: Technical Specifications 91

Software Specifications

CDMA specification

Data service

SMS (IS-637)

FAX

IOTA

IS-2000 Release 0

IS-707A

Not supported

Not supported

Supported

Supported OTASP (IS-683A,

IS-683B, IS-683C)

OTAPA

PRL (preferred roaming list)

Authentication

Voice

NAM

E911

Supported

Supported

Supported

Not supported

Single

Not supported

Position Location Supported (Mobile Station based)

TTY/Accessibility Not supported

Mobile IP Supported

92 Section 4A: Technical Specifications

Environmental Specifications

-10 to +60°C Operating temperature

Storage temperature

Humidity

Vibration

Drop

-20 to +85°C

85%, non-condensing

Random vibration, 10 to 1000 Hz, nominal 6G RMS in each of 3 mutually perpendicular axes.

Test duration of 60 minutes for each axis, for a total test time of 3 hours (non-operating).

1 m on concrete on each of 6 faces, 2 times

Mechanical Specifications

Dimensions

(W x L x H)

39 mm x 93 mm x 20 mm

Power button Not supported

Headset jack Not supported

LED Red/green

Section 4A: Technical Specifications 93

S e c t i o n 4 B

Regulatory Information

In This Section

⽧

Regulatory Notices

⽧

Patents

⽧

Trademarks

⽧

Copyright

⽧

Limitation of Liability

⽧

Additional Information and Updates

This section contains important regulatory notices about your Sprint Mobile

Broadband USB modem, and also patent and other information.

94 Section 4B: Regulatory Information

Regulatory Notices

The design of the AirCard 595U USB modem complies with U.S. Federal

Communications Commission (FCC) and Industry Canada (IC) guidelines respecting safety levels of radio frequency (RF) exposure for portable devices, which in turn are consistent with the following safety standards previously set by

Canadian, U.S. and international standards bodies:

䢇 ANSI / IEEE C95.1-1999, IEEE Standard for Safety Levels with Respect to Human

Exposure to Radio Frequency Electromagnetic Fields, 3kHz to 300 GHz

䢇 National Council on Radiation Protection and Measurements (NCRP) Report 86,

1986, Biological Effects and Exposure Criteria for Radio Frequency

Electromagnetic Fields

䢇 Health Canada, Safety Code 6, 1999, Limits of Human Exposure to Radio frequency Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz

䢇 International Commission on Non-Ionising Radiation Protection (ICNIRP) 1998,

Guidelines for limiting exposure to time-varying electric, magnetic, and electromagnetic fields (up to 300 GHz)

FCC ID: N7N-MC5725U

CAUTION: The AirCard 595U USB modem has been tested for compliance with

FCC/IC RF exposure limits in the laptop computer(s) configurations with a horizontal USB slot and can be used in laptop computers with substantially similar physical dimensions, construction, and electrical and RF characteristics. This USB modem must not be colocated or operated in conjunction with any other antenna or transmitter. Use of this device in any other configuration may exceed the FCC RF

Exposure compliance limit. Note: If this USB modem is intended for use in any other portable device, you are responsible for separate approval to satisfy the SAR requirements of Part 2.1093 of FCC rules.

WARNING (EMI) - United States FCC Information - This equipment has been tested and found to comply with the limits for a class B computing device peripheral, pursuant to Parts 15, 22, and 24 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation.

Section 4B: Regulatory Information 95

96

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

䢇 Reorient or relocate the receiving antenna

䢇 Increase the separation between the equipment and receiver

䢇 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

䢇 Consult the dealer or an experienced radio/TV technician for help

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.

CAUTION: Any changes or modifications not expressly approved by Sprint

Communications Company L.P. could void the user’s authority to use the equipment.

WARNING (EMI) - Canada: This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference causing equipment standard entitled “Digital Apparatus,” ICES-003 of the

Department of Communications.

Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils numériques de Classe B préscrites dans la norme sur le matériel brouilleur: “Appareils Numériques,” NMB-003 édictée par le ministre des

Communications.

If you have purchased this product under a United States Government contract, it shall be subject to restrictions as set forth in subparagraph (c)(1)(ii) of Defense

Federal Acquisitions Regulations (DFARs) Section 252.227-7013 for Department of

Defense contracts, and as set forth in Federal Acquisitions Regulations (FARs)

Section 52.227-19 for civilian agency contracts or any successor regulations. If further government regulations apply, it is your responsibility to ensure compliance with such regulations.

Section 4B: Regulatory Information

Patents

Portions of this product are covered by some or all of the following US patents:

5,515,013 5,629,960 5,845,216 5,847,553 5,878,234

5,890,057 5,929,815 6,169,884 6,191,741 6,199,168

6,339,405 6,359,591 6,400,336 6,516,204 6,561,851

6,643,501 6,653,979 6,697,030 6,785,830 6,845,249

6,847,830 6,876,697 6,879,585 6,886,049 6,986,171

6,985,757 7,023,878 7,053,843 7,106,569 D442,170

D459,303 and other patents pending.

Licensed by QUALCOMM Incorporated under one or more of the following United States patents and/or their counterparts in other nations:

4901307 5056109 5101501 5109390 5228054

5267261 5267262 5337338 5414796 5416797

5490165 5504773 5506865 5511073 5535239

5544196 5568483 5600754 5657420 5659569

5710784 5778338

Manufactured or sold by Sierra Wireless or its licensees under one or more patents licensed from InterDigital Group.

Section 4B: Regulatory Information 97

Trademarks

Sprint, the “Going Forward” logo, and other trademarks are trademarks of

Sprint Nextel.

AirCard ® and “Heart of the Wireless Machine” ® are registered trademarks of Sierra

Wireless.

Sierra Wireless, the Sierra Wireless logo, Watcher, and the red wave design are trademarks of Sierra Wireless.

Windows ® is a registered trademark of Microsoft Corporation.

Mac OS is a trademark of Apple Inc., registered in the U.S. and other countries.

QUALCOMM ® is a registered trademark of QUALCOMM Incorporated.

InstallShield ® is a registered trademark and service mark of InstallShield

Corporation.

All other trademarks are property of their respective owners.

Copyright

©2007 Sprint Nextel. All rights reserved. No reproduction in whole or in part without prior written approval. Sprint, the “Going Forward” logo, and other trademarks are trademarks of Sprint Nextel.

©2007 Sierra Wireless. All rights reserved.

Document 2130751 Revision 2.0

98 Section 4B: Regulatory Information

Limitation of Liability

The information in this manual is subject to change without notice and does not represent a commitment on the part of Sierra Wireless. SIERRA WIRELESS AND ITS

AFFILIATES SPECIFICALLY DISCLAIM LIABILITY FOR ANY AND ALL DIRECT, INDIRECT,

SPECIAL, GENERAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY

DAMAGES INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS OR REVENUE OR

ANTICIPATED PROFITS OR REVENUE ARISING OUT OF THE USE OR INABILITY TO USE

ANY SIERRA WIRELESS PRODUCT, EVEN IF SIERRA WIRELESS AND/OR ITS AFFILIATES

HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR THEY ARE

FORESEEABLE OR FOR CLAIMS BY ANY THIRD PARTY.

Notwithstanding the foregoing, in no event shall Sierra Wireless and/or its affiliates aggregate liability arising under or in connection with the Sierra Wireless product, regardless of the number of events, occurrences, or claims giving rise to liability, be in excess of the price paid by the purchaser for the Sierra Wireless product.

Additional Information and Updates

For up-to-date product descriptions, documentation, application notes, firmware upgrades, troubleshooting tips, and press releases, visit: www.sierrawireless.com

Section 4B: Regulatory Information 99

100

Safety Information and

Terms & Conditions

Section 5

102

S e c t i o n 5 A

Safety and Notices

In This Section

⽧

Important Notice

⽧

Safety and Hazards

This section describes important guidelines regarding your Sprint Mobile

Broadband USB modem.

Section 5A: Safety and Notices 103

Important Notice

Because of the nature of wireless communications, transmission and reception of data can never be guaranteed. Data may be delayed, corrupted (i.e., have errors) or be totally lost. Although significant delays or losses of data are rare when wireless devices such as the Sprint Mobile Broadband USB modem by Sierra Wireless

(AirCard 595U) CDMA modem are used in a normal manner with a wellconstructed network, they should not be used in situations where failure to transmit or receive data could result in damage of any kind to the user or any other party, including but not limited to personal injury, death, or loss of property.

SPRINT SPECTRUM L.P. accepts no responsibility for damages of any kind resulting from delays or errors in data transmitted or received using the Sprint Mobile

Broadband USB modem by Sierra Wireless (AirCard 595U) CDMA modem, or for failure of the Sprint Mobile Broadband USB modem by Sierra Wireless

(AirCard 595U) to transmit or receive such data.

Safety and Hazards

Do not operate the Sprint Mobile Broadband USB modem by Sierra Wireless

(AirCard 595U) in areas where blasting is in progress, where explosive atmospheres may be present, near medical equipment, life support equipment, or any equipment which may be susceptible to any form of radio interference. In such areas, the Sprint Mobile Broadband USB modem by Sierra Wireless

(AirCard 595U) MUST BE POWERED OFF . It can transmit signals that could interfere with this equipment.

Do not operate the Sprint Mobile Broadband USB modem by Sierra Wireless

(AirCard 595U) in any aircraft, whether the aircraft is on the ground or in flight. In aircraft, the Sprint Mobile Broadband USB modem by Sierra Wireless

(AirCard 595U) MUST BE POWERED OFF . When operating, it can transmit signals that could interfere with various onboard systems.

The driver or operator of any vehicle should not operate the Sprint Mobile

Broadband USB modem by Sierra Wireless (AirCard 595U) while in control of a vehicle. Doing so will detract from the driver or operator's control and operation of that vehicle. In some jurisdictions, operating such communications devices while in control of a vehicle is an offense.

To avoid the risk of explosion, use the same battery model when replacing the battery. Properly dispose of the used battery.

104 Section 5A: Safety and Notices

S e c t i o n 5 B

Terms and Conditions

In This Section

⽧ Subscriber Agreement/General Terms and Conditions of Services

This section contains the terms and conditions of service for your Sprint Mobile

Broadband USB modem.

Section 5B: Terms and Conditions 105

Subscriber Agreement

General Terms and Conditions of Services

Please note these terms may not be the most current version. A current version of the terms is available at our Web site or upon request.

Para solicitar esta literatura en español, por favor visitar a www.sprint.com

.

Basic Definitions

In this document: (1) “we,” “us,” “our” mean Sprint Solutions, Inc. and its affiliates doing business as Sprint or Sprint PCS; (2) “you,” “your,” “customer,” and “user” mean an account holder or user with us; (3) “Device” means any phone, device, accessory or other product we sell to you or that is active on your account with us; and (4) “Service” means our offers, rate plans, options, wireless services or Devices on your account with us.

The Subscriber Agreement

The Subscriber Agreement (“Agreement”) is a contract under which we provide and you accept our Services. In addition to these Terms and Conditions of Service

(“Ts&Cs”), there are several parts to the Agreement, including, but not limited to, the detailed plan or other information on Services we provide or refer you to during the sales transaction, and any confirmation materials we may provide you.

It is important that you carefully read all of the terms of the Agreement.

Services Covered By These Ts&Cs & Additional Terms

These Ts&Cs apply to our standard wireless Services and any other Service we offer you that references these Ts&Cs. Different terms will apply to most business accounts. Additional terms will apply when you use certain Services, typically those you can access online (for example, picture/video Services, online forums, etc.). Additional terms will also apply if you activate Services as part of a bundle with another company’s services (for example, cable services, home phone services, etc.). The additional terms for bundled Services may either modify or replace certain provisions in these Ts&Cs, including terms relating to activation, invoicing/payment, and disputing charges. Also, a different dispute resolution provision may apply to services provided by another company (the dispute resolution provisions in this Agreement still apply to our Services). You will be provided details on any additional terms with your selection of any bundled

Service.

106 Section 5B: Terms and Conditions

Our Policies

Services are subject to our business policies, practices and procedures (“Policies”), including, but not limited to, our Privacy Policy and Acceptable Use Policy and

Visitor Agreement – both available at our Web site. You agree to all of our Policies when you use our Services. Our Policies are subject to change at anytime with or without notice.

When You Accept The Agreement

You must have the legal capacity to accept the Agreement. You accept the

Agreement when you do any of the following: (a) sign a contract with us on paper or electronically; (b) accept Agreement through an oral or electronic statement; (c) attempt to or in any way use the Services; (d) pay for the Services; or (e) open any package or start any program that says you are accepting the Agreement when doing so. If you don’t want to accept the Agreement, don’t do any of these things.

Term Commitments & Early Termination Fees

Many of the Services (for example, rate plans and Device discounts) that we offer require you to maintain certain Services with us for a minimum term, usually 1 or

2 years (“Term Commitment”). You will be charged a fee (“Early Termination Fee”) for each line of Service that you terminate early (i.e., prior to satisfying the Term

Commitment) or for each line of Service that we terminate early for good reason (for example, violating the payment or other terms of the Agreement). Early Termination

Fees are a part of our rates. Your exact Term Commitment and Early Termination

Fee may vary based on the Services you select and will be disclosed to you during the sales transaction. Carefully review any Term Commitment and Early Termination

Fee requirements prior to selecting Services. After you have satisfied your Term

Commitment, your Services continue on a month-to-month basis without any

Early Termination Fee, unless you agree to extend your Term Commitment or agree to a new Term Commitment – for example, by accepting a new rate plan or upgrading your Device. As explained directly below, there are instances when you will not be responsible for an Early Termination Fee for terminating Services early.

When You Don’t Have To Pay An Early Termination Fee

You aren’t responsible for paying an Early Termination Fee when terminating

Services: (a) provided on a month-to-month basis; (b) consistent with our published trial period return policy; or (c) in response to a materially adverse change we make to the Agreement as described directly below.

Section 5B: Terms and Conditions 107

Our Right To Change The Agreement & Your Related Rights

We may change any part of the Agreement at any time, including, but not limited to, rates, charges, how we calculate charges, or your terms of Service. We will provide you notice of material changes, and may provide you notice of non-material changes, in a manner consistent with this Agreement (see “Providing Notice Under This Agreement” paragraph). Except as provided below, if a change we make to the Agreement is material and has a material adverse effect on you, you may terminate each line of

Service materially affected without incurring an Early Termination Fee only if you:

(a) call us within 30 days after the effective date of the change; and (b) specifically advise us that you wish to cancel Services because of a material change to the

Agreement that we have made. If you do not cancel Service within 30 days of the change, an Early Termination Fee will apply if you terminate Services before the end of any applicable Term Commitment.

Our Right To Suspend Or Terminate Services

We can, without notice, suspend or terminate any Service at any time for any reason, including, but not limited to: (a) late payment; (b) exceeding an Account Spending

Limit (“ASL”); (c) harassing/threatening our employees or agents; (d) providing false information; (e) interfering with our operations; (f) using/suspicion of using

Services in any manner restricted by or inconsistent with the Agreement;

(g) breaching the Agreement, including our Policies; (h) providing false, inaccurate, dated or unverifiable identification or credit information, or becoming insolvent or bankrupt; (i) modifying a Device from its manufacturer specifications; or ( j) if we believe the action protects our interests, any customer’s interests or our network.

Your Ability To Change Services & When Changes Are Effective

You typically can change Services upon request. In some instances, changes may be conditioned on payment of an Early Termination Fee or certain other charges, or they may require you to accept a new Term Commitment. Changes to Services are usually effective at the start of your next full invoicing cycle. If the changes take place sooner, your invoice may reflect pro-rated charges for your old and new Services.

Your Right To Terminate Services

You can terminate Services at any time by calling us and requesting that we deactivate all Services. You’re responsible for all charges billed or incurred prior to deactivation. If Services are terminated before the end of your invoicing cycle, we

108 Section 5B: Terms and Conditions

won’t prorate charges to the date of termination and you won’t receive a credit or refund for any unused Services. Except as provided above, you must also pay us an

Early Termination Fee for each line of Service that you terminate early.

Credit Checks & Credit Information

We agree to provide you Services on the condition you have and maintain satisfactory credit according to our standards and policies. You agree to provide information we may request or complete any applications we may provide you to facilitate our review. We rely on the credit information you furnish, credit bureau reports or other data available from commercial credit reference services, and other information (such as payment history with us) to determine whether to provide or continue to provide you Services. The Services we offer you can vary based on your credit history. We may at any time, based on your credit history, withdraw or change Services, or place limits or conditions on the use of our

Services. You agree to provide us updated credit information upon request.

We may provide your payment history and other account billing/charge information to any credit reporting agency or industry clearinghouse.

Account Spending Limits (“ASL”)

An ASL is a temporary or permanent limit (typically based on credit history, payment history, or to prevent fraud) we place on the amount of unpaid charges you can accumulate on your account, regardless of when payment on those charges is due. We reserve the right to determine which charges count towards an

ASL. If you have an ASL, we may suspend your Services without prior notice if your account balance reaches the ASL, even if your account is not past due. We may impose or increase an ASL at any time with notice. An ASL is for our benefit only and should not be relied on by you to manage usage.

Deposits & Returning Deposits

We may at any time require a deposit, as a guarantee of payment, for you to establish or maintain Service (“Deposit”). By providing us a Deposit, you grant us a security interest for all current or future amounts owed to us. We may change the

Deposit at any time with notice. You can’t use a Deposit to make or delay payments. The Deposit, the length of time we hold the Deposit, and changes to the Deposit are determined based on your credit history, payment history and other factors. Unless prohibited by law, we may mix Deposits with our other funds and it won’t earn interest and we reserve the right to return the Deposit as a credit on your invoice at anytime. If your Services are terminated for any reason, we may keep and apply your Deposit to any outstanding charges. We’ll send any

Section 5B: Terms and Conditions 109

remaining portion of Deposit to your last known address within 90 days after your final invoice – if it is returned to us, we will forward it on to the appropriate state authorities to the extent required by law.

Restrictions On Using Services

You can’t use our Services: (a) to transmit content/messages that are, or in any manner that is, illegal, fraudulent, threatening, abusive, defamatory, or obscene;

(b) in a way that could cause damage or adversely affect our customers, reputation, network, property or Services; (c) to communicate any unsolicited commercial voice, text, SMS, or other message; (d) to infringe on the copyright of another, or upload or transmit any “virus”, “worm”, or malicious code; or (e) in any way prohibited by the terms of our Services, the Agreement or our Policies.

Your Device, Number & E-mail Address; Caller ID

We don’t manufacture any Device we might sell to you or that is associated with our Services, and we aren’t responsible for any defects, acts or omissions of the manufacturer. The only warranties on your Device are the limited warranties given to you by the manufacturer directly or that we pass through. Your Device is designed exclusively for use on our network and in other coverage areas we make available to you. It will not accept wireless service from another carrier. Except for any legal right you may have to port/transfer your phone number to another carrier, you have no and cannot gain any (for example, through publication, use, etc.) proprietary, ownership or other rights to any phone number, identification number, e-mail address or other identifier we assign to you, your Device or your account. We’ll notify you if we decide to change or reassign them.

Porting/Transferring Phone Numbers

We don’t guarantee that number transfers to or from us will be successful. If you authorize another carrier to transfer a number away from us, that is considered a request by you to us to terminate all of the Services associated with that number.

You’re responsible for all charges billed or incurred prior to deactivation and for any applicable Early Termination Fees.

Coverage; Where Your Device Will Work

Our coverage maps are available at our stores and at our Web site. The specific network coverage you get will depend on the radio transmissions your Device can pick up and Services you’ve chosen. Our coverage maps provide high level estimates of our coverage areas when using Services outdoors under optimal conditions.

110 Section 5B: Terms and Conditions

Coverage isn’t available everywhere. Estimating wireless coverage and signal strength is not an exact science. There are gaps in coverage within our estimated coverage areas that, along with other factors both within and beyond our control (network problems, software, signal strength, your Device, structures, buildings, weather, geography, topography, etc.), may result in dropped and blocked connections, slower data speeds, or otherwise impact the quality of Service. Services that rely on location information, such as E911 and GPS navigation, depend on your Device’s ability to acquire satellite signals (typically not available indoors) and network coverage.

Roaming

“Roaming” typically refers to coverage on another carrier’s network that we make available to you based on our agreements with other carriers. These agreements may change from time to time and roaming coverage is subject to change. Your ability to receive roaming coverage depends on the radio transmissions your

Device can pick up. You can pick up roaming coverage both within and outside our network coverage areas. Your Device will generally indicate when you’re roaming.

Depending on your Services, separate charges or limits on the amount of minutes used while roaming may apply. Certain Services may not be available or work the same when roaming (including data Services, voicemail, call waiting, etc.).

About Data Services & Content

Our data Services and your Device may allow you to access the internet, text, pictures, video, games, graphics, music, email, sound and other materials (“Data

Content”) or send Data Content elsewhere. Some Data Content is available from us or our vendors, while other Data Content can be accessed from others (third party Web sites, games, ringers, etc.). We make absolutely no guarantees about the Data Content you access on your Device. Data Content may be: (1) unsuitable for children/minors; (2) unreliable or inaccurate; or (3) offensive, indecent or objectionable.

You’re solely responsible for evaluating the Data Content accessed by you or anyone on your account. We strongly recommend you monitor data usage by children/minors.

Data Content from third parties may also harm your Device or its software. To protect our network, Services, or for other reasons, we may place restrictions on accessing certain Data Content (such as certain Web sites, applications, etc.), impose separate charges, limit throughput or the amount of data you can transfer, or otherwise limit or terminate Services. If we provide you storage for

Data Content you have purchased, we may delete the Data Content with notice or place restrictions/limits on the use of storage areas. You may not be able to make or receive voice calls while using data Services.

Section 5B: Terms and Conditions 111

Specific Terms & Restrictions On Using Data Services

In addition to the rules for using all of our other Services, unless we identify the

Service or Device you have selected as specifically intended for that purpose (for example, wireless routers, Data Link, etc.), you can’t use our data Services: (1) with server devices or host computer applications, or other systems that drive continuous heavy traffic or data sessions; and (2) as a substitute or backup for private lines or frame relay connections. We reserve the right to limit or suspend any heavy, continuous data usage that adversely impacts our network performance or hinders access to our network. If your Services include unlimited web or data access, you also can’t use your Device as a modem for computers or other equipment, unless we identify the Service or Device you have selected as specifically intended for that purpose (for example, with “phone as modem” plans, connection card plans, wireless router plans, etc.).

Activation & Miscellaneous Charges

Based on our Policies, we may charge activation, prepayment, reactivation, program or other fees to establish or maintain Services. Certain transactions may also be subject to a charge (for example, convenience payment, changing phone numbers, handset upgrades, etc.). You will be provided notice of these types of fees before we complete the requested transaction.

Account & Service Charges; Pro-rating; Unused Minutes

You are responsible for all charges associated with your account and the Services on your account, no matter who uses the Services. Charges include, but are not limited to, the monthly recurring charges, usage charges, taxes, surcharges and fees associated with your Services. These charges are described or referred to during the sales transaction, in our marketing materials, and in confirmation materials we may send to you.

How We Calculate Your Charges For Billing Purposes

Regular Voice Calls: We round up partial minutes of use to the next full minute.

Time starts when you press “Talk” or your Device connects to the network and stops when you press “End” or the network connection otherwise breaks. You’re charged for all calls that connect, even to answering machines. You won’t be charged for unanswered calls or if you get a busy signal. For incoming calls answered, you’re charged from the time shortly before the Device starts ringing until you press “End” or the network connection otherwise breaks. If charges vary depending on the time of day that you place or receive calls (e.g., Nights and

112 Section 5B: Terms and Conditions

Weekend plans), you’re charged for the entire call based on the rate that applies to the time period in which the call starts.

iDEN Walkie-Talkie Charges: Charges for walkie-talkie calls are billed to the person who starts the call and calculated by multiplying the duration of the call by the applicable rate and number of participants. You’re charged at least 6 seconds of airtime for each call you start; subsequent communications in the same call are rounded up to and billed to the next second. Time begins when you press any button to start a walkie-talkie call and ends approximately 6 seconds after completion of a communication to which no participant responds – subsequent walkie-talkie communications are considered new calls. Depending on your plan, nationwide, international or group walkie-talkie calls may use the local walkietalkie minutes in your plan and result in additional charges. Responses to call alert transmissions are treated as new walkie-talkie transmissions even when responding within 6 seconds of receiving the alert.

Data Usage: Unless we specifically tell you otherwise, data usage is measured in bytes, kilobytes and megabytes – not in minutes/time. 1024 bytes equals

1 kilobyte (“KB”), and 1024 KB equals 1 megabyte. Bytes are rounded up to kilobytes, so you will be charged at least 1 KB for each data usage session (“data session”). Rounding occurs at the end of each data session, and sometimes during a data session. Depending on your data Services, usage may be charged against an allowance or on a fixed price per KB. If you are charged on a fixed price per KB, any fractional cents will be rounded up to the next cent. You are charged for all data directed to your Device’s internet address, including data sessions you did not initiate and for incomplete transfers. As long as your Device is connected to our data network, you may incur data charges. Examples of data you will be charged for includes the size of a requested file or Data Content (game, ringer, etc.), web page graphics (logos, pictures, banners, advertisement, etc.), additional data used in accessing, transporting and routing the file on our network, data from partial or interrupted downloads, re-sent data, and data associated with unsuccessful attempts to reach Web sites or use applications. These data charges are in addition to any charges for the Data Content itself (game, ringer, etc.). Data used and charged to you will vary widely, even between identical actions or data sessions. Estimates of data usage – for example, the size of downloadable files – are not reliable predictors of actual usage. Your bill won’t separately list the number of KB attributed to a specific action/data session.

Section 5B: Terms and Conditions 113

Your Bill

Your bill provides you notice of your charges. It reflects monthly recurring charges

(usually billed one bill cycle in advance) and usage/transaction specific charges

(usually billed in the bill cycle in which they’re incurred). Some usage charges, such as those that depend on usage information from a third party, may be billed in subsequent bill cycles and result in higher than expected charges for that month. Bill cycles and dates may change from time to time. Your bill may also include other important notices (for example, changes to this Agreement, to your

Service, legal notices, etc.). Your paper bill may not include individual call detail.

Your call detail is available online. Paper bills with call detail may be subject to an additional charge. If you choose internet billing, you will not receive paper bills.

Your Payments; Late Fees

Payment is due in full as stated on your bill. If we do not receive payment in full by the date specified on your bill, a late payment charge, which may be charged at the highest rate permissible by law, may be applied to the total unpaid balance.

We may also charge you any costs we pay to a collection agency to collect unpaid balances from you. If we bill you for amounts on behalf of a third party, payments received are first applied to our charges. You may be charged additional fees for certain methods of payment. We may charge you, up to the highest amount permitted by law, for returned checks or other payments paid by you and denied for any reason by a financial institution. Acceptance of payments (even if marked

“paid in full”) does not waive our right to collect all amounts that you owe us. We may restrict your payment methods to cashier’s check, money order, or other similar secure form of payment at any time for good reason.

Taxes & Government Fees

You agree to pay all federal, state and local taxes, fees and other assessments that we’re required by law to collect on the Services we provide you and remit to the government. These charges may change from time to time without advance notice. If you’re claiming any tax exemption, you must provide us with a valid exemption certificate. Tax exemptions generally won’t be applied retroactively.

Surcharges

You agree to pay the surcharges, fees and other charges that we assess to recoup our government costs or costs of complying with certain government programs

(“Surcharges”). Surcharges aren’t taxes or government mandated charges; they’re charges we choose to collect from you. Surcharges are subject to change, sometimes on

114 Section 5B: Terms and Conditions

a monthly or quarterly basis. Examples of Surcharges include, but are not limited to:

Universal Service Fund, E911, Federal Programs Cost Recovery, Federal Wireless

Number Pooling and Portability, and gross receipts charges. We will make efforts to provide you notice of any changes to Surcharges in a manner consistent with this Agreement (see “Providing Notice Under This Agreement” paragraph).

However, since most Surcharges are based on amounts set by the government or based on government formulas, it will not always be possible to provide advance notice of new Surcharges or changes in the amount of existing Surcharges.

Information on Surcharges is provided during the sales transaction and is available at our Web site.

Disputing Charges - You Must Still Pay Undisputed Charges

Any dispute to a charge on your bill must be made within 60 days of the date of the bill that initially contained the charge. Disputes can only be made by calling or writing us as directed on your invoice or elsewhere. You accept all charges not properly disputed within the above time period – undisputed charges must still be paid as stated on your bill.

Protecting Our Network & Services

We can take any action to: (1) protect our network, our rights and interests, or the rights of others; or (2) optimize or improve the overall use of our network and

Services. Some of these actions may interrupt or prevent legitimate communications and usage – for example, message filtering/blocking software to prevent SPAM or viruses, limiting throughput, limiting access to certain Web sites, applications or other Data Content, etc. For additional information on what we do to protect our customers, network, Services and equipment, see our Acceptable

Use Policy and Visitor Agreement at our Web site.

Your Privacy

You agree to the terms of our Privacy Policy, available at our Web site, when you use our Services. This policy may change from time to time, so review this policy with regularity and care. Among other things, the policy includes important information on what information we collect about you, how we use that information, and with whom we share that information (for example, to provide you certain Services, to protect our rights and interests, to respond to legal process, to facilitate a merger, etc.). Also, to ensure the quality of our Services and for other lawful purposes, we may also monitor or record calls between us (for example, your conversations with our customer service or sales departments).

115

If you do not agree with the terms of our Privacy Policy, do not purchase or use our Services.

Location Based Services

Our network generally knows the location of your Device when it is outdoors and turned on. By using various technologies to locate your Device, we can provide enhanced emergency 911 services, and optional location-sensitive services provided by us or a third party. Environmental factors (such as structures, buildings, weather, geography, landscape, and topography) can significantly impact the ability to access your Device’s location information and use of location-sensitive services. The terms and conditions of any location-sensitive service that you purchase from us may provide more information about how location information is used and disclosed. Use of some of location-sensitive services may require network coverage. If any Device on your account uses a location-sensitive service, you (the accountholder) must clearly and regularly notify the actual user of your Device that their location may be tracked or discovered. For additional information on location-sensitive services, see our Privacy Policy at our

Web site.

911 Or Other Emergency Calls

Public Safety Officials advise that when making 911 or other emergency calls, you should always be prepared to provide your location information.

Unlike traditional wireline phones, depending on a number of factors (e.g., whether your Device is

GPS enabled, where you are, whether local emergency service providers have upgraded their equipment, etc.), 911 operators may not know your phone number, your location or the location of your Device. In certain circumstances, an emergency call may be routed to a state patrol dispatcher or alternative location set by local emergency service providers. Enhanced 911 service (“E911”), where enabled by local emergency authorities, uses GPS technology to provide location information. Even when available, however, E911 does not always provide accurate location information. If your Device is indoors or for some other reason cannot acquire a satellite signal, you may not be located. Some Devices have a safety feature that prevents use of the keypad after dialing 911 – you should follow voice prompts when interacting with emergency service providers employing IVR systems to screen calls.

If Your Device Is Lost or Stolen

Call us immediately if your Device is lost or stolen because you may be responsible for usage charges before you notify us of the alleged loss or theft. You agree to

116 Section 5B: Terms and Conditions

cooperate if we choose to investigate the matter (provide facts, sworn statements, etc.). We may not waive any Early Termination Fees if you choose to terminate Services as a result of loss or theft of your Device.

Disclaimer of Warranties

WE MAKE NO REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING (TO THE EXTENT ALLOWED BY LAW) ANY IMPLIED WARRANTY OF

MERCHANTABILITY, NON-INFRINGEMENT OR FITNESS FOR A PARTICULAR

PURPOSE CONCERNING YOUR SERVICES (INCLUDING YOUR DEVICE). WE DON’T

PROMISE UNINTERRUPTED OR ERROR-FREE SERVICES AND DON’T AUTHORIZE

ANYONE TO MAKE WARRANTIES ON OUR BEHALF.

You Agree We Are Not Responsible For Certain Problems

You agree that neither we nor our vendors, suppliers or licensors are responsible for any damages resulting from: (a) anything done or not done by someone else;

(b) providing or failing to provide Services, including, but not limited to, deficiencies or problems with a Device or network coverage (for example, dropped, blocked, interrupted calls/messages, etc.); (c) traffic or other accidents, or any health-related claims relating to our Services; (d) Data Content or information accessed while using our Services; (e) an interruption or failure in accessing or attempting to access emergency services from a Device, including through 911, Enhanced 911 or otherwise; (f) interrupted, failed, or inaccurate location information services, (g) information or communication that is blocked by a spam filter, or (h) things beyond our control, including acts of God (for example, weather-related phenomena, fire, earthquake, hurricane, etc.), riot, strike, war, terrorism or government orders or acts.

You Agree Our Liability Is Limited - No Consequential Damages.

TO THE EXTENT ALLOWED BY LAW, OUR LIABILITY FOR MONETARY DAMAGES FOR

ANY CLAIMS YOU MAY HAVE AGAINST US IS LIMITED TO NO MORE THAN THE

PROPORTIONATE AMOUNT OF THE SERVICE CHARGES ATTRIBUTABLE TO THE

AFFECTED PERIOD. UNDER NO CIRCUMSTANCES ARE WE LIABLE FOR ANY

INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR SPECIAL DAMAGES OF ANY NATURE

WHATSOEVER ARISING OUT OF OR RELATED TO PROVIDING OR FAILING TO

PROVIDE SERVICES IN CONNECTION WITH A DEVICE, INCLUDING, BUT NOT

LIMITED TO, LOST PROFITS, LOSS OF BUSINESS, OR COST OF REPLACEMENT

PRODUCTS AND SERVICES.

Section 5B: Terms and Conditions 117

DISPUTE RESOLUTION

We Agree To First Contact Each Other With Any Disputes

We each agree to first contact each other with any disputes and provide a written description of the problem, all relevant documents/information and the proposed resolution. You agree to contact us with disputes by calling or writing us as instructed on your invoice. We will contact you by letter to your billing address or on your Device.

Instead Of Suing In Court, We Each Agree To Arbitrate Disputes

We each agree to finally settle all disputes (as defined and subject to any specific exceptions below) only by arbitration. In arbitration, there’s no judge or jury and review is limited. However, just as a court would, the arbitrator must honor the terms and limitations in the Agreement and can award the same damages and relief, including any attorney’s fees authorized by law. The arbitrator’s decision and award is final and binding, with some exceptions under the Federal

Arbitration Act (“FAA”), and judgment on the award may be entered in any court with jurisdiction. We each also agree as follows:

(1) “Disputes” are any claims or controversies against each other related in any way to our Services or the Agreement, including, but not limited to, coverage, Devices, privacy, or advertising, even if it arises after Services have terminated – this includes claims you bring against our employees, agents, affiliates or other representatives, or that we bring against you.

(2) If either of us wants to arbitrate a dispute, we agree to send written notice to the other providing a description of the dispute, previous efforts to resolve the dispute, all supporting documents/information, and the proposed resolution.

Notice to you will be sent to your billing address and notice to us will be sent to:

General Counsel; Arbitration Office; 2001 Edmund Halley Drive VARESP0513-502;

Reston, Virginia 20191. We agree to make attempts to resolve the dispute. If we cannot resolve the dispute within forty-five (45) days of receipt of the notice to arbitrate, then we may submit the dispute to formal arbitration.

(3) The FAA applies to this Agreement and arbitration provision. We each agree the FAA’s provisions, not state law, govern all questions of whether a dispute is subject to arbitration.

(4) The arbitration will be administered by the International Institute for Conflict

Prevention and Resolution (“CPR”) under its arbitration rules. If any of the CPR’s rules conflict with the terms of the Agreement, the terms of the Agreement apply.

118 Section 5B: Terms and Conditions

You can obtain procedures, rules, and fee information from the CPR at

1-212-949-6490 or www.cpradr.org

.

(5) Unless we each agree otherwise, the Arbitration will be conducted by a single neutral arbitrator and will take place in the county of your last billing address. The federal or state law that applies to the Agreement will also apply during the arbitration.

(6) We each agree not to pursue arbitration on a classwide basis. We each agree that any arbitration will be solely between you and us (not brought on behalf of or together with another individual’s claim). If for any reason this restriction is found unenforceable, then our agreement to arbitrate doesn’t apply.

(7) We each are responsible for our respective costs relating to counsel, experts, and witnesses, as well as any other costs relating to the arbitration. However, we will cover any arbitration administrative or filing fees above: (a) $25 if you are seeking less than $1,000 from us; or (b) the equivalent court filing fees for a court action in the appropriate jurisdiction if you are seeking $1,000 or more from us.

Exceptions To Our Agreement To Arbitrate Disputes

Either of us may bring qualifying claims in small claims court. In addition, this arbitration provision does not prevent you from filing your dispute with any federal, state or local government agency that can, if the law allows, seek relief against us on your behalf.

Section 5B: Terms and Conditions 119

No Class Actions

TO THE EXTENT ALLOWED BY LAW, WE EACH WAIVE ANY RIGHT TO PURSUE

DISPUTES ON A CLASSWIDE BASIS; THAT IS, TO EITHER JOIN A CLAIM WITH THE

CLAIM OF ANY OTHER PERSON OR ENTITY, OR ASSERT A CLAIM IN A

REPRESENTATIVE CAPACITY ON BEHALF OF ANYONE ELSE IN ANY LAWSUIT,

ARBITRATION OR OTHER PROCEEDING.

No Trial By Jury

TO THE EXTENT ALLOWED BY LAW, WE EACH WAIVE ANY RIGHT TO TRIAL BY JURY

IN ANY LAWSUIT, ARBITRATION OR OTHER PROCEEDING.

Indemnification

You agree to indemnify, defend and hold us harmless from any claims arising out of your actions, including, but not limited to, failing to provide appropriate notices regarding location-sensitive services (see “Location Based Services” paragraph), or violating this Agreement, any applicable law or regulation or the rights of any third party.

Providing Notice To Each Other Under The Agreement

Except as the Agreement specifically provides otherwise, you must provide us notice by calling or writing us as instructed on your invoice. We will provide you notice in your bill, correspondence to your last known billing address, to any fax number or e-mail address you’ve provided us, by calling you on your home phone or Device, by voice message on your Device or home phone, or by text message on your Device.

Other Important Terms

Subject to federal law or unless the Agreement specifically provides otherwise, this Agreement is governed solely by the laws of the state encompassing the area code assigned to your Device, without regard to the conflicts of law rules of that state. If either of us waives or doesn’t enforce a requirement under this

Agreement in an instance, we don’t waive our right to later enforce that requirement. Except as the Agreement specifically provides otherwise, if any part of the Agreement is held invalid or unenforceable, the rest of this Agreement remains in full force and effect. This Agreement isn’t for the benefit of any 3rd party except our corporate parents, affiliates, subsidiaries, agents, and predecessors and successors in interest. You can’t assign the Agreement or any of your rights or duties under it. We can assign the Agreement. The Agreement and

120 Section 5B: Terms and Conditions

the documents it incorporates make up the entire agreement between us and replaces all prior written or spoken agreements – you can’t rely on any contradictory documents or statements by sales or service representatives. The rights, obligations and commitments in the Agreement that, by their nature, would logically continue beyond the termination of Services (including, but not limited to, those relating to billing, payment, 911, dispute resolution, no class action, no jury trial), survive termination of Services.

© 2007 Sprint Nextel. All rights reserved. No reproduction in whole or in part without prior written approval. Sprint, the “Going Forward” logo and other trademarks are trademarks of Sprint Nextel. iDEN is a trademark of Motorola, Inc.

Section 5B: Terms and Conditions 121

122

Glossary and Index

Section 6

Glossary

1X

One Times Radio Transmission Technology (the “one times” refers to the frequency spectrum). Also known as Sprint Vision. Supports Internet connections with data rates up to 153 kbps. Actual speed depends on the network conditions.

Compare to 1xEV-DO.

1xEV-DO

A high-speed standard for cellular packet data communications. Also known as

Sprint Power Vision.

1xEV-DO Rev. A supports Internet connections with data rates up to 3.1 Mbps

(downlink from the network) and 1.8 Mbps (uplink to the network). Average data rates are 450-800 kbps (downlink from the network) and 300-400 kbps (uplink to the network).

1xEV-DO Rev. 0 supports Internet connections with data rates up to 2.4 Mbps

(downlink from the network) and 153 kbps (uplink to the network). Average data rates are 400-700 kbps (downlink from the network) and 40-80 kbps (uplink to the network)

Actual speed depends on the network conditions. Compare to 1X.

bps bits per second —The actual data speed over the transmission medium.

broadband

High-speed wireless services optimized for data. Sprint Mobile Broadband is the next evolutionary step for the Sprint Power Vision Network.

CDMA

Code Division Multiple Access —A wideband spread spectrum technique used in digital cellular, personal communications services, and other wireless networks.

Wide channels (1.25 MHz) are obtained through spread spectrum transmissions, thus allowing many active users to share the same channel. Each user is assigned a unique digital code, which differentiates the individual conversations on the same channel.

dBm decibels relative to 1 milliwatt

Glossary 125

dormant

The network switches the data connection into dormant mode if there is no traffic on the connection for some time. When you resume data traffic, the high-speed data connection becomes active.

ESN

Electronic Serial Number—The unique serial number assigned to the device for cellular network use. Either the ESN or MEID is on the label on the device (under the battery), and is also displayed in the Device Info & Diagnostics window

(page 72). See also MEID.

FCC

Federal Communications Commission —The U.S. federal agency that is responsible for interstate and foreign communications. The FCC regulates commercial and private radio spectrum management, sets rates for communications services, determines standards for equipment, and controls broadcast licensing. Consult www.fcc.gov

.

fix

GPS location information obtained from the network.

GPS

Global Positioning System —A system that uses a series of 24 geosynchronous satellites to provide location data.

IS

Interim Standard —After receiving industry consensus, the TIA forwards the standard to ANSI for approval.

kbps kilobits per second —Actually 1000, not 1024, as used in computer memory size measurements of kilobytes.

LAN

Local Area Network

LED

Light Emitting Diode —A semiconductor diode that emits visible or infrared light.

Mbps

Megabits per second.

126 Glossary

MEID

Mobile Equipment Identifier —The unique second-generation serial number assigned to the Sprint Mobile Broadband USB modem for cellular network use.

Either the MEID or ESN is on the label on the device (under the battery), and is also

displayed in the Device Info & Diagnostics window (page 72). Compare to ESN.

MHz megahertz —One million cycles per second

PCS

Personal Communications Services —A cellular communication infrastructure.

roaming

A cellular subscriber is in an area where service is obtained from a cellular service provider other than Sprint.

Sprint Connection Manager

Software that allows you to manage the Sprint Mobile Broadband USB modem’s actions and monitor your connections.

Sprint Mobile Broadband

High-speed wireless services optimized for data. Sprint Mobile Broadband is the next evolutionary step for the Sprint Power Vision Network.

Sprint Power Vision

Sprint’s advanced multimedia third generation services available on the network.

See 1xEV-DO.

Sprint Vision

Sprint’s advanced multimedia third generation services available on the network.

See 1X.

Glossary 127

system tray

Usually located in the bottom right of the screen (near the clock). When

Sprint Connection Manager is running, it places an icon in this area, which you

can use to monitor the connection state (page 39). If you right-click the icon, a

shortcut menu is displayed (page 58):

TIA

Telecommunications Industry Association —A standards-setting trade organization, whose members provide communications and information technology products, systems, distribution services, and professional services in the United States and around the world. Consult www.tiaonline.org

.

ToolTip

Text that displays when you position the mouse pointer over an area of the screen

(for example, over an indicator).

VPN

Virtual Private Network

WAN

Wide Area Network

128 Glossary

Index

Symbols

84

Numerics

1-888-211-4727 27

1X Only (Network Mode) 64

1X, 1xEV-DO

description 5

amount of data transferred 48

application to automatically launch upon

network connection 47

automatically connecting when ready 64

cannot connect 83

connecting 45

coverage, determining 40

dormant indicator 34

ending a connection 49

icons 34 roaming indicator 34 transmit/receive indicator 34

warning when roaming 46

1xEV-DO Only (Network Mode) 64

3G

see 1X, 1xEV-DO

A

About Sprint Mobile Broadband 75

accessibility 92

account

accessing 27

setting up 22

Activating and Using Sprint Service 22 activating the device 22 activation 22

activation code 24

Activation Wizard

overview 22

Activation Wizard button 65

aircraft 42, 104

Alert Log 71 alerts 71

always on

description 5

billing 77

set 33

Always on top 62

Always show Welcome screens 64

Always-on connection 5

Index

amount of data transferred 48

antenna, adjusting 17

AOL 77

approvals 91

assistance 27, 49

authentication 92

auto-launch Sprint Connection Manager 33

Auto-launch upon network connection 47

Automatic (Network Mode) 64

Automatic (roaming option) 65

automatically connecting to network 64

automatically starting Sprint Connection

Manager 33

AutoPreview 78

B

basics 31

battery

warning 17

charging 18

inserting into device 17

replacing 10

behavior when the device is locked 51

billing, and always on 77

blasting 104

bookmarks 53

business usage 70

C

call duration 70

cannot connect to the network 83

care and maintenance 10

CDMA

networks 4 roaming - description 4

signal strength indicator 34

specification 92

changing the lock code 53

channel spacing 91

charging the battery 18

Check for updates once per month 62

Check Now button 62

Clear Log 71

Close Sprint Connection Manager 44

Close Sprint Mobile Broadband 44

compact view of Sprint Connection

Manager 43

conditions of service 105

Connected 37

connected icon 39

129

Connected to NDIS 37

Connecting 37

connecting 45

connecting automatically 64

connecting icon 39

connection

1X or 1xEV-DO (Network Mode) 64

alert log 71

Always-on 5

amount of data transferred 48

application to automatically launch upon

network connection 47

automatically connecting when ready 64

cannot connect 83

diagnostics 72

ending 49

establishing 45

history 70

issues 71

launching 45 making 45

Network Mode 64

states 35, 39

warning when roaming 46

Connection History 70

Connection Manager

see Sprint Connection Manager

connection states 39

Consent Agreement for ’Location & Search

Services’ menu 67

contents of package 6

Could not prepare data services 84

coverage maps 27

coverage type, determining 40

Create Report 74

current 91

customer support 27

D

Data LED 90

data profile 25 data provisioning 25

data speeds 77

data transferred, amount of 48

default connection 45

deleting Sprint Connection Manager 54

Device Info & Diagnostics 72

Device Locked 38

Device powered off 38, 42

device, powering off 42

130

diagnostics 72

dial-up account 77

dimensions 93

Disconnected 36

disconnected icon 39

disconnecting 49

disk space required 9

Display ’Location & Search Services’ on the

menu 67

Displaying system information 74

Do not show Privacy Consent Agreement for

’Location & Search Services’ menu 67

document number 98

dormant icon 39

driver installation 20

drop test 93

E

E911 92

editing

Sprint Connection Manager settings 60

Sprint Power Vision/Sprint Vision

connection 63

electrical specifications 91

electronic serial number 24

elevation information 68

Enable Location on Device 67

Enable NIC for data connections 64

encryption - required for IOTA 9

ending a connection 49

environmental specifications 93

error messages - viewing 71

ESN 24

EV-DO. See 1X, 1xEV-DO.

exiting Sprint Connection Manager 44

expanded view of Sprint Connection

Manager 43 expanding Sprint Connection Manager 43

explosion risk if incorrect battery used 17

F

FAQ 76

favorites 53

fax 92

FCC

compliance 95

ID 95

firmware upgrades 99

forgot the lock code 50

Index

frequencies, transmit and receive 91 frequency stability 91

Frequently Asked Questions 76

G

General options in Settings window 61

Getting Help 26

Getting Started 7

global positioning system (GPS). See

Location & Search Services

glossary 125

GO automatically when ready 64

GO button 45

GO button is unavailable 82

Google Maps 67

GPS Testing 68

GPS. See Location & Search Services

H

hard drive space required 9 hardware requirements 9

hazards 104

headset jack 93

Help

overview 27

alert log 71

contact number 27

device info and diagnostics 72 diagnostics 72

frequently asked questions 76

menu options 55

online Help 49

Sprint Customer Service 27

Sprint.com 27

tests 72

troubleshooting 80

hibernation mode 79

high encryption 9

history 70

hospital 42

humidity 93

I icons

Sprint Connection Manager 34

system tray 39

IMSI_S 24

indicators

Sprint Connection Manager 34

system tray 39

information, system 72

Index

initial lock code 50

Initializing 36

inserting the device 20

installation

overview 7

Installed files 74

interference 42

Internet Over The Air 25

introduction ii

invoice, requesting a copy of 27

IOTA (Internet Over The Air)

description 25

IOTA Provisioning window 25

Unable to prepare data services 84

K

Keep Connection History 62

knowledge base 27

L

latitude 68

Launch Connection Manager automatically

62

LBS (Location-Based Services). See Location

& Search Services

LEDs 90

liability, limitation of 99

life support equipment 104

light (LED) 90

Limitation of Liability 99

links, access 53

Location & Search Services

frequently asked questions 77

settings 66

troubleshooting 84

using 40

Location-Based Services. See Location &

Search Services

lock code

overview 50

changing 53

initial lock code 50 warning 50

lock device

immediately 51 upon startup 51

locked device

behavior when the device is locked 51

changing the lock code 53

initial lock code 50

131

unlocking the device 52

log, alert 71

log, connection 70

longitude 68

M

Mac OS X 8

maintenance 10

making a connection

1X or 1xEV-DO (Network Mode) 64 always on 64

amount of data transferred 48

application to automatically launch upon

network connection 47

automatically 64

cannot connect 83

connecting to Sprint Power Vision/Sprint

Vision 45

Network Mode 64

map services 67

Mapping and Search Service 67

MapQuest 67

maps, coverage 27

MDN 24

medical equipment 104

MEID 24

memory required 9

Menu

all options 55

About Sprint Mobile Broadband 75

Alert Log 71

Connection History 70

Device Info & Diagnostics 72

Exit 49

Links 53

Location & Search Services 40

Menu button 35

Settings 60

Software Updates 74

system tray menu 58

Menu button 35

menu options

Location & Search Services menu 40

Sprint Connection Manager menu 55

system tray menu 58

messages - viewing 71

Microsoft Live 67

Microsoft VPN (PPTP) Connection 47

minimizing Sprint Connection Manager

immediately 44

on startup 62

132

minus sign in Sprint Connection Manager

43

Mobile IP 92

MS-Based position location 92

MSID (Mobile System ID) 23, 24

N

NAM 92

NDIS

Connected to NDIS 37

network

See Sprint National Network network interface card (NIC) 64

Network Mode 64

NIC 64

No device 36

non-preactivated device 23

non-preferred roaming area 34

notices - safety and regulatory 95, 103

number of satellites 68

O

on top, always 62

online Help 49

operating systems supported 8

operating temperature 93

optimizing performance 78

OTAPA 92

OTASP 92

P

package contents 6

patents 97

performance, improving 78

personal usage 70

phone number

during Activation Wizard 24

Sprint Mobile Broadband USB modem 50

planes 104

Play sound effects 62

plus sign (+) in Sprint Connection Manager

43

port configuration 72

position location 92

See also Location & Search Services

power button 93

powering the device on and off 42

Power LED 90

Power Vision, Sprint (1xEV-DO). See 1X,

1xEV-DO.

Index

powered off 38, 42

PPTP - Microsoft VPN (PPTP) Connection 47

preactivated device 22

preferred roaming list 92

Preview Pane 78

Privacy Consent Agreement 67

PRL 92

problems 80

products, Sprint 53

profile - data 25

properties of connection, changing 63

provisioning 22, 25

Q questions

See troubleshooting

R

radio frequency specifications 91 receive frequencies 91

records of connection history 70

regulatory information 94

regulatory notices 95

Relock modem when program exits 51

removing Sprint Connection Manager 54

removing the device 20

report of system information 74

requirements, system 8

restoring Sprint Connection Manager 44

RF specifications 91

Roam Guard 46

Roam Mode 64

Roam Only (roaming option) 65

roaming

description 4

display warning message 46

indicator 34

PRL 92

settings 64

RSSI 34, 72

Running Diagnostics 72

S

Safety and Hazards 104

Safety and Notices 103

satellites, number of 68

Search Services 40, 67

Searching 38

Searching for service 36, 82

security

Index

overview of user lock 50 warning 50

behavior when the device is locked 51

changing the lock code 53

high encryption - required for IOTA 9

IOTA - high encryption requirement 9

lock device immediately 51 lock device upon startup 51

unlocking the device 52

service plan, adding options 27

service, conditions of 105

service, searching for 82

services, Sprint 53

Setting Up Service 21

Settings window

overview 60

General 61

Sprint Location Services 66

Sprint Vision 63

shortcut menu 58

show Welcome screens 64

signal strength

diagnostic tests 72

indicator 34

SMS 92

software

components 10

lock device immediately 51 lock device upon startup 51

menu options 55

minimizing 44

minimizing on startup 62

removing 54

restore minimized 44

specifications 92

uninstalling 54

unlocking the device 52

updating 74

upgrading Windows 85

user lock 50

version information 75

Windows, upgrading 85

Software Updates 74

sound effects, play 62

specifications

environmental 93 mechanical 93

radio frequency and electrical 91

software 92

speeds, data transmission 77

Sprint (roaming option) 64

133

Sprint Connection Manager

overview 32

1X or 1xEV-DO connection (Network

Mode) 64

About Sprint Mobile Broadband 75

amount of data transferred 48

application to automatically launch upon

network connection 47

automatically connecting when ready 64

cannot connect 83

closing 44

configuring 60

expanding Sprint Connection Manager

43

FAQ 76 frequently asked questions 76

icons 34

icons in system tray 39

links 53

Location-Based Services 40

menu options 55

minimizing 44

minimizing on startup 62

Network Mode 64

removing 54

restoring 44

security features 50

settings 60

starting 32

starting automatically 33

stopped working after Windows upgrade

85

system tray menu 58

uninstalling 54

updating 74

upgrading Windows 85

version information 75

window overview 33

Windows upgrade 85

Sprint Connection Manager settings

1X or 1xEV-DO connection (Network

Mode) 64

changing 60

General 61

Sprint Location Services 66

Sprint Vision 63

Sprint Connection Manager stopped working after I’ve upgraded to a different

version of Windows 85

Sprint Customer Service 27

Sprint Location Services

settings 66

134

troubleshooting 84

using 40

Sprint Mobile Broadband USB modem

inserting 20

phone number 50

Sprint National Network

1X or 1xEV-DO connection (Network

Mode) 64 always on connection 64

amount of data transferred 48

application to automatically launch upon

network connection 47

automatically connecting when ready 64

availability status 72

cannot connect 83

CDMA wireless network, description 4

connecting 45

coverage, determining 40

frequently asked questions 76

Location-Based Services 40

roaming indicator 34

roaming options 64

signal strength indicator 34

Sprint Power Vision (1xEV-DO). See 1X,

1xEV-DO.

Sprint products and services 53

Sprint roaming 64

Sprint services

Sprint Customer Service 27

Sprint Vision

1X or 1xEV-DO connection (Network

Mode) 64

Always show Welcome screens 64

amount of data transferred 48

application to automatically launch upon

network connection 47

automatically connecting when ready 64

cannot connect 83

connecting 45

coverage, determining 40

disconnecting 49 ending a connection 49

Network Mode 64

settings 63

warning when roaming 46

See also 1X, 1xEV-DO.

Sprint web site 27

Sprint, contacting 27 sprint.com 27

standby current 91

Start in system tray 62

Index

starting a connection application to automatically launch upon

network connection 47

automatically connecting when ready 64

immediately 45

specify 1X or 1xEV-DO connection

(Network Mode) 64

warning when roaming 46

starting Sprint Connection Manager

automatically 33

manually 32

states of connection 35

status information 72

status of connection 35

Stop button 49

storage temperature 93

support 27

suspend mode 90

system information 72, 74

System parameters 74

system requirements 8

system tray

connection states 39 icons 39

menu 58 shortcut menu 58

start in 62

T taskbar icon

shortcut menu 44

technical specifications 89

technical support 27

telephone number of device 50

temperature (operating, and storage) 93

Terms and Conditions 105

terms and definitions (glossary) 125

Test GPS 68

tests, diagnostic 72

trademarks 98

transferred data, amount of 48

transmission speeds 77

transmit frequencies 91

transmit/receive icon 34

transmitter power 91

troubleshooting

common causes of problems 81

alert log 71

cannot connect 83

contact information 27

Index

Could not prepare data services 84

FAQ 76

GO button is unavailable 82

Location-Based Services 84

run diagnostic tests 72

searching for service 82

stopped working after Windows upgrade

85

Troubleshooting wizard 27

Unable to prepare data services 84

wizard 27

Troubleshooting wizard 27

TTY 92

type of coverage, determining 40

U

uninstalling Sprint Connection Manager 54

unlocking the device

initial lock code 50

instructions 52

Update Data Profile 25

updates, checking for latest 99

updating the software 74

Updating User Profile… 25

upgrading Windows 85

URL to automatically launch upon network

connection 47

URLs - favorites 53

USB port 72

user lock

overview 50 warning 50

changing the lock code 53

lock device immediately 51 lock device upon startup 51

unlocking the device 52

User Lock Change button 65

V

vehicle, operating 104

version information 75

vibration 93

Viewing your phone number 50

views of Sprint Connection Manager 43

Vision

see Sprint Vision, and 1X, 1xEV-DO

Vista 8

voice support 92

voltage 91

VPN 78

135

VPN program to automatically launch upon

network connection 47

W warning

explosion risk if incorrect battery used 17

lock code, regarding 50

roaming, display message 46

warranty 6

weak signal 82

Web site automatically launch upon network

connection 47

favorites 53

Sprint.com 27

Welcome screen, always show 64

white paper 78

Windows

auto-launch Sprint Connection Manager

62

upgrading 85

versions supported 8

wizard

Activation Wizard 22

Troubleshooting 27 www.sprint.com 27

Y

Yahoo! Maps 67

136 Index