DISH 21.1 IR, UHF, 20.1 remote control, receiver, TV, DVD player, VCR User guide

Below you will find brief information for remote control 21.1 IR, remote control 21.1 UHF, remote control 20.1. The document describes how to configure and use the remote control, including inserting batteries, using the System Wizard, making the remote work with your DISH Network receiver, using the SAT Mode, TV Mode, DVD Mode, and DVR functions. It also explains how to program the remote to control other devices, including TVs, DVD players, VCRs, and audio amplifiers. If you need help using the remote control, you can find the necessary information in this document.

PDF

Document

Remote User Guide

Safety Instructions

You must keep safety in mind while using this device. Keep these and any other instructions for future reference.

Observe Warnings: Carefully follow all warnings on the device and in the operating instructions.

Heat: Do NOT place the device near heat sources such as radiators, stoves, heat registers, or other appliances that produce heat.

Care and Use

Cleaning: Do NOT use liquid, abrasive, solvent, or aerosol cleaners. Use a damp cloth for cleaning.

When Not in Use: Remove the batteries if this device is to be left unattended or unused for a long period of time.

Refer servicing to qualified personnel when a solid object or liquid has fallen onto or into the device.

Do NOT attempt to service this device. Refer all servicing to qualified personnel. Opening covers other than the battery cover will void the warranty.

Publishing Information

The information in this User Guide may change without notice.

Revisions may be issued to tell you about such changes.

Send comments or questions about this User Guide to [email protected] or

Technical Publications, EchoStar Technologies L.L.C,

90 Inverness Drive Circle East, Englewood, Colorado 80112.

Document Number: 180532

Printed in

DISH Network is a trademark and service mark of DISH

Network.

All product names, trade names, or corporate names mentioned in this User Guide are acknowledged to be the proprietary property of the registered owners.

Configuring the 20.1 Remote

The 20.1 remote does not require any configuration. Go to Insert the Batteries (page 2) .

Configuring the 21.1 Remote

Complete the following steps to configure your remote.

Pull the remote battery cover off.

Decide whether to use IR or UHF signals for the remote. Use UHF signals if you do not have a clear line of sight between the remote and the receiver.

Set UHF/IR SWITCH to either

UHF or IR. If your remote has a blank, black key, continue to

Insert the Batteries on page 2.

If your remote shows a “1” or a

“2” on the bottom, you can pull out this key and flip it to the other number (2 to 1 and 1 to 2). To separate the key from the remote, insert your thumbnail or a coin in the crease. Remove the key by grasping at the bottom.

Insert the key you wish to use to designate the remote and slide into place. Usually a 1 = TV1 and a 2 = TV2. For remotes showing the blank, black key, leave this key as it is.

Insert the Batteries

Pull the remote battery cover off.

Insert 4 AAA batteries, making sure to match the plus (+) ends with the plus markings on the battery case.

Replace the remote battery cover.

Using System Wizard

Note : Not all receivers support System Wizard. If

System Wizard does not appear, continue with page 4 or page 5 to make your remote work with your receiver.

Use System Wizard initially to set up the remote to work with the receiver. System Wizard can also store/ restore your remote settings. Note : If your batteries are low, replace them before beginning.

Press and hold 0 until

System Wizard message appears. Make sure the remote and receiver are in line of sight.

If first time in System

Wizard, follow instructions provided.

When green checkmark displays, select

Advanced to store/ restore remote settings.

3 Follow the on-screen options.

Select Continue to return to Live TV.

Making 20.1 and 21.1 IR

Remote Work with Receiver

For 20.1 and 21.1 IR

Use the following instructions to configure your remote while using IR signals.

Note : Use these instructions if your receiver does not support System Wizard.

Turn your receiver and

TV on, and press

SYSTEM INFO on the front of the receiver.

Confirm that you see the System

Info screen.

Press RECORD on your remote. The receiver then matches the remote’s address.

Confirm that your remote operates your receiver by pressing remote buttons.

If this is not working, go back to step 3.

Making 21.1 UHF Remote

Work with Receiver

For 21.1 UHF

Use the following instructions if you have configured your remote to use

UHF signals.

Note : Use these instructions if your receiver does not support System Wizard.

Verify the UHF antenna is installed on the back of the receiver.

2 Turn your receiver and

TV on, and press

SYSTEM INFO on the front of the receiver.

Confirm that you see the System

Info screen.

Press RECORD on your remote. The remote address will probably change on the screen.

Confirm that your remote operates your receiver by pressing remote buttons. If this is not working, go back to step 4.

SAT Mode

SAT

To use the features described in this section, make sure you are in SAT mode by pressing the SAT Mode button.

Note : Some features may not be available depending on your receiver model.

Input

Press once for Input

Press and hold for Recover

Receiver Menu

Access receiver features and settings

Press this button for

SAT Mode

Receiver Power & TV Power

Top button turns the receiver on/off

Bottom button turns the TV on/off

Page Buttons

Page up/down in menus

Program Guide

Display current and future satellite program listings

Browse

See what is on other channels while watching TV

Volume and

Mute Buttons

Control TV volume

Programming required

Themes

Search for programs using Themes

Recall

Return to last

TV channel viewed

Info

Get info on programs

Search

Search for a program

Shortcut Keys

(for future use)

Cancel

Return to previous menu or to watching a program

Arrow/Select

Buttons

Channel up/down, navigate through menus, and select a desired option

Digital Video

Recorder (DVR)

Buttons

Pause live TV and play or record programming

Format

Format the picture to the desired width to match the program

you are viewing

Picture-In-Picture

(PIP) Buttons

Watch two separate programs at once

(in Single Mode)

DishHOME

Explore interactive

TV features

View Satellite

Programming

Exit out of any menu/guide and return to viewing live TV

Number Buttons

Enter a channel number or navigate through menus

System Wizard

Press and hold to fix remote control issues and sync data

TV Mode

Input

Switch between

TV inputs

TV Menu

Access menu features available on some TVs

Mute

Turn TV volume on or off

Recall

Return to last

TV channel viewed

Press this button for

TV Mode

Receiver Power

& TV Power

Turn the TV on/off

Volume

Control TV volume

Up/Down

Arrow Buttons

Channel up/ down on TV

Number Buttons

Enter a desired channel number on TV

Picture-In-Picture

(PIP) Buttons

Display PIP features on some TVs with

PIP capabilities

DVD Mode

DVD

DVD/VCR Power

& TV Power

Top button turns the

DVD player/VCR power on and off

Bottom button turns the TV on and off

Input

Switch VCR between its TV & VCR mode

Back

Rewind a videotape or reverse a DVD

Stop

Stop playing a DVD, stop playing or recording a videotape

Record

Record on a videotape

Press this button for

DVD Mode

Up/Down

Arrow Buttons

Channel up/ down on VCR

Pause

Pause a videotape or DVD

FWD

Forward a videotape or DVD

Play

Play a videotape or DVD

Number Buttons

Enter a channel number for DVD

DVR Functions

Press twice to go to the list of recorded programs.

Plays a live or recorded program.

Pauses a live or recorded program.

Stops recording a program.

Records a program.

Press BACK once to reverse the program four times as fast as normal play. Press BACK twice to reverse at

15 times normal speed, three times to reverse at 60 times normal speed, and four times to reverse at 300 times normal speed. The on-screen bar shows how far you’ve gone. For a live program, you can only reverse back to the last channel change or back one hour, whichever occurs first.

Press SKIP BACK to skip back about

10 seconds in a program.

Press FWD (Forward) once to fast- forward through the program four times normal speed. Press FWD twice to forward at 15 times normal speed, three times to forward at 60 times normal speed, and four times to forward at 300 times normal speed.

DVR Functions, continued

The on-screen bar shows how far you’ve gone. Of course, you cannot forward into the part of a live program that has not been broadcast yet.

Press and release to skip forward through recorded programs. Press and hold before releasing to fast-forward quickly (x4). If pressed and released once in fast-forward mode, forwarding video increases to second speed (x60).

Press SKIP FWD to skip ahead about

30 seconds in the program.

Press PAUSE and then press BACK to reverse the program in slow motion at 1/4 the speed of normal play. Press

BACK again to reverse at normal speed.

Press PAUSE and then press FWD to forward the program in slow motion at

1/15 the speed of normal play. Press

FWD twice to forward at 1/4 as fast as normal play. Press FWD three times to play the program. Of course, you cannot forward a live program that has not been broadcast yet.

Press PAUSE and then press SKIP

BACK to reverse the recording frameby-frame.

Press PAUSE and then press SKIP

FWD to advance the recording frameby-frame.

Programming Remote to

Control Another Device

Entering a Code

1 Turn the device and receiver on.

TV Codes

This table contains the manufacturer codes for programming the remote control to operate your TV. If your TV brand is not listed or if the codes do not work, the remote may not control your TV. In some cases, codes may operate some, but not all buttons, shown in this guide.

Note: If programming a second TV in AUX mode, press 0 before entering the TV code.

Abex 658

ABS 721

Accurian 623

Acer 511

Admiral 514 521 532

533 572 665 675 726 739

740 834 835

Advent 502 653 842 912

Aiko 524 727 778

Aiwa 667

Akai 506 520 592 601 612 622

627 652 680 684 738 750 754

794 795 807 808 858 865 866

906 907 908

Alaron

A-Mark

532

Albatron 692 804

Alienware

804

721

America Action 541 657 682

Ampro 691

Amtron

Anam 541 657 682

Anam National

AOC

541 657

505 506 519 520 582 620

627 653 654 913

Apex Digital 542 552

574 595 743 744 745 757

759 771 815

Archer

Astar

804

594

ASA 514 665

524 528 531 541

565 623 624 657 678 682 697

719 727 778 810 816 832

Autovox

Aventura

514 665

527 569 694

733 841 846

Axion 636

Bang & Olufsen 514 665

Barco 770 824 825 826 828

Baycraft

Baysonic

Belcor

536

682

505 627 773

Bell & Howell

Benq 511 535

590 611 675 683

Bradford 541 657 682

Brillian 558

Brionvega

Brockwood

514 665

Broksonic

505 627

533 622 648 682

726 748 750 752 754 834 865

866 899 908 byd:sign 792

C & M 804

Candle

536 627 654

Capehart

Carnivale

Carver

627

506 520 627

621 656 674 761

792 818 897

CCE 528 816

Celebrity 500 640 652

677 758 781 783 795 797

798 837 844

Celera 743 744 745 815

Century 514 665

Changhong

697

743 744 745 815

Cineral

Circuit City

Citizen

627

506 516 520 523 524

536 590 622 627 654 655 657

658 664 680 702 727 750 754

778 865 866 908

Clarion

Coby

541 657 682

Colt

607 626 633

660

627 654

Table continued on next page

Find the brand name of the device listed in the code tables that start on page 29.

Press and hold the Mode button until all the other

Mode buttons light up. Once

Mode buttons are lit, release the button.

For AUX Mode only . Press

0 for second TV.

1 for a second DVD/VCR.

2 for a tuner, amplifier, or audio receiver.

Enter one of the three-digit device codes from the table using buttons on the number pad, such as device code

560.

If you want to program

Limited Mode, see Placing

Remote in Limited Mode on page 15.

Programming Remote to

Control Another Device

Entering a Code, continued

5 Press POUND (#). The

Mode button flashes three times.

6 Turn device on and try other buttons to make sure the device responds the way you expect. If you want to try another code, begin from

Step 1 again.

7 Turn off the device.

8 If you are unable to find a code that works or if all the keys are not supported, go to Learning From Another

Device’s Remote on page

24 to program the key to the

DISH Network remote.

If you are unable to find a code that works, try the instructions for Scanning the Remote Database on page 13.

Programming Remote to

Control Another Device

Scanning the Remote Database

1 Turn the device and receiver on.

Press and hold the correct

Mode button for the device until all Mode buttons light up.

Skip this step if programming

TV or DVD Mode buttons.

For AUX Mode only . Press

0 for second TV.

1 for second DVD/VCR.

2 for tuner, amplifier, or audio receiver.

Press the STAR (*) button.

Press and release UP ARROW slowly. When the device turns off, continue to Step 5. If the device remains on, continue pressing UP ARROW. When all codes have been tried, the

Mode button flashes eight times.

Try Learning From Another

Device’s Remote on page 24.

Press POUND (#). The Mode button flashes three times.

Turn the device on and try other buttons to make sure the device responds the way you expect.

If not, try another code by returning to Step 1.

Displaying Device Code

To identify the device code that your remote control is using, complete the following steps:

1 Press and hold the Mode button until all the Mode buttons light up and then release it. When you release the Mode button, the selected Mode button flashes.

2 Press and release POUND

(#) twice.

The Mode button flashes a number of times corresponding to the value of the stored device code. For example, if the stored device code is 593, the Mode button flashes five times, pauses, flashes nine times, pauses, and flashes three times. A quick flash is for zero.

For AUX mode : The first group of flashes tells you what the AUX mode controls, then the following flashes tell you each digit of the device’s code.

Record the stored device code in the Reference Table on the inside back cover.

Placing Remote in Limited

Mode

Limited Mode locks out all the device mode operations except for the device’s power, Mute, and Volume. This prevents you from accidentally tuning away from satellite programming.

Note : Limited Mode cannot be used with audio amplifiers.

Press and hold the TV, DVD, or AUX Mode button until all

Mode buttons light up.

2 Press PAGE UP to activate.

Press PAGE DOWN to take the remote out of Limited

Mode.

Press POUND (#).

SAT Auto-Tune

SAT Auto-Tune programs into the remote control the correct TV channel used for viewing your paid programming. If you are experiencing fuzzy, snowy, blue, or black screens, it might be due to the TV being set to the wrong channel. Using the SAT Auto-

Tune feature helps prevent these screen issues from occurring on TVs connected to the receiver’s modulated output (usually TV2). Use SAT Auto-Tune to program the correct TV channel for satellite viewing into the remote control. When TV is pressed and released, the remote sends that channel to the TV, ensuring that the TV is on the correct channel for viewing your paid programming.

This feature is enabled by default; however, if you want to use this feature, the channel must be programmed by following the steps in Setting SAT Auto-Tune Channel .

Setting SAT Auto-Tune Channel

Make sure the remote control operates your TV.

Press and hold TV for three seconds until all four Mode buttons are lit.

Press STAR (*).

Enter the channel used for viewing (two or three digits in range of 002 to 125), for example channel “10” or “010.”

5 Press POUND (#). The Mode button flashes three times to indicate programming was successful.

Press SAT. The channel changes.

Enabling and Disabling SAT

Auto-Tune

Note : SAT Auto-Tune is enabled by default; however, the channel must be set (see Setting SAT Auto-Tune

Channel on page 16).

1 Press and hold SAT for three seconds until all four Mode buttons are lit.

Press STAR (*).

Press VOLUME UP to enable

SAT Auto-Tune or VOLUME

DOWN to disable.

Press POUND (#).

Removing SAT Auto-Tune Channel

Press and hold the TV mode button until it stays lit.

Press STAR (*).

Enter 00 or 000.

Press POUND (#).

Setting Auto-Tune for

DVD/VCR

You can set Auto-Tune for your DVD and/or

VCR. Auto-Tune allows you to return to the channel for your DVD/VCR output when you accidentally change the channel or video input.

1 Make sure the remote control operates your DVD/VCR.

2 Press and hold DVD for three seconds until all four Mode buttons are lit.

Press STAR (*).

Enter the channel used for viewing (two or three digits in range of 002 to 125), for example channel “03” or

“004”.

Press POUND (#). The Mode button flashes three times to indicate programming was successful.

Removing Auto-Tune for

DVD/VCR

If you want to remove Auto-Tune for your DVD and/or VCR, follow the steps below.

Press and hold DVD until it stays lit.

Press STAR (*).

Enter 00 or 000.

Press POUND (#).

Recovering Your Picture

Use the RECOVER button to get back to watching satellite programming if you accidentally change channels or inputs on your TV, DVD, and/ or VCR. To use this feature, you must set up

Auto-Tune for your TV (see page 16) and for your

DVD/VCR (see page 18).

Note : RECOVER only works if the remote control has been set up to control the TV and/or DVD/VCR, if connected. If the RECOVER button is used, the TV channel programmed for SAT Auto-Tune is also the channel that is sent to the

TV. RECOVER first tries to tune your TV to channel 3, then channel 4, and then other video inputs with each press of the

RECOVER button. You may need to press the RECOVER button up to 30 times to recover your satellite TV video.

1 Press and hold RECOVER until all Mode buttons light up.

2 If you see the System Info screen, proceed to step 4.

Otherwise, continue to step 3.

Press RECOVER again and wait until the Mode lights stop flashing. If you see the

System Info screen, go to step 4. If not, repeat this step until you see the screen.

Press SELECT to resume watching TV.

Control Amplifier Volume

When the remote control is set up to operate your

TV, the MUTE and VOLUME buttons adjust your

TV volume when in SAT mode. To use the remote to adjust the volume of a remote-controllable audio receiver or amplifier instead of adjusting the TV’s volume setting, use the steps on this page.

1 Press and hold AUX until all

Mode buttons are lit, then release it. The AUX mode button blinks.

Press POUND (#).

Press the plus (+) side of the

VOLUME button.

Press the 0 number button.

Press POUND (#). The AUX mode button flashes three times.

Make sure the remote controls the amplifier’s volume in other modes:

Press SAT.

Press the plus (+) and minus

(-) sides of the VOLUME button.

8 Your tuner/amplifier’s volume changes, and the AUX mode button lights.

Control TV Volume

Use this procedure to change from having the remote adjust the volume of a audio receiver or amplifier to having the remote adjust the TV’s volume. When the remote control is set up to operate your TV, the MUTE and VOLUME buttons adjust your TV volume when in SAT mode.

1 Press and hold TV until all

Mode buttons are lit, then release it. The TV mode button blinks.

Press POUND (#).

Press the plus (+) side of the

VOLUME button.

Press the 0 number button.

Press POUND (#). The TV mode button flashes three times.

Make sure the remote controls the TV’s volume in other modes:

Press SAT.

Press the plus (+) and minus

(-) sides of the VOLUME button.

Your TV’s volume changes, and the TV mode button lights.

Programming Remote to Control

Second Receiver in AUX Mode

If you have another DISH Network receiver installed, you can use this remote control in AUX mode to operate your new receiver. AUX mode uses only IR signals, so the line of sight to the second receiver must be unobstructed. You can program the remote control to operate any other

DISH Network receiver except where UHF is used, such as TV2 on DISH Network receivers.

Turn on the second receiver and open System Info screen.

Write down the TV2 address that is shown.

Press and hold AUX until all

Mode buttons light up, then release the button. AUX flashes.

Use the Number Pad on the remote control to enter a 3, followed by the address in step 2.

Press POUND (#). AUX flashes three times.

Press RECORD to verify that the address in the remote control now matches the address for the receiver.

Learning From Another

Device’s Remote

Use this procedure if you are unable to find a code that allows your DISH Network remote to control your device. This procedure is also applicable if, after you have programmed your DISH Network remote to control your device (in TV, DVD, or AUX modes), some of the commands are not functioning as you expect.

The learning function of your DISH Network remote control can support these commands.

The remote control can learn commands in one of two ways:

• You can follow the instructions for using device codes to program a specific mode, and then learn commands that add new or overwrite existing functions of the remote control’s buttons in this mode. For this type of learning, any button without a learned command keeps the previous command (if any) for that device code.

• Each button on this remote learns a command from the device’s original remote control. For this type of learning, any button without a learned command keeps the previous command (if any) for that device code.

Learning can occur only in TV, DVD, or AUX modes.

The Mode buttons (SAT, TV, DVD, and AUX) cannot learn a command. For each Mode button, the POWER button can be learned to turn the devices associated with that Mode on and off.

Note : The TV Power button turns the TV on and off in all Modes. It cannot be learned.

Note : The remote times out if a button isn’t pressed within 20 seconds. If the remote times out, then the learning process needs to start over again.

To teach the DISH Network remote control specific commands for another device, complete the following steps.

Learning from Another

Device’s Remote, continued

Ensure the DISH Network remote control is programmed to the desired remote address

(see page 4 or 5).

Place both the DISH Network remote and the original device’s remote control on a flat, stable surface. Point the front of the original device’s remote to face the small square (IR window) on the front, left-hand side of the DISH Network remote, as shown below. The remotes should be no more than

3” apart.

On the DISH Network remote, press and hold the

Mode button you want to use for the device until all the Mode buttons light up (approximately three seconds), and then release it. The selected Mode button blinks continuously.

To start learning commands for this mode, select one of the following choices:

• If you’ve found a code for the device, first program the code using the instructions for

Entering a Code on page 11 or Scanning the

Remote Database on page 13. If the device code has been programmed, press and release

RECALL (the Mode light goes off when

RECALL is pressed and comes on when released), then hold the RECORD button until the Mode button is lit again (about three seconds). The Mode button remains lit while learning.

• If the device code has not been programmed for that device or if you are unable to find a code, press and hold the RECORD button until the

Mode button is lit (about three seconds). The button remains lit while learning.

Learning from Another

Device’s Remote, continued

On the DISH Network remote, press the button you want to teach. The Mode light goes off and comes back on.

On the original device’s remote control, press and hold the button you want learned until the Mode light goes out and comes back on. You may need to press the button on the original remote several times for the DISH Network remote to learn the command.

• If the DISH Network remote learns the command, the Mode light blinks off and then back on.

• If the Mode light blinks three times or remains lit, the DISH Network remote did not learn the command.

After a button has learned a command successfully, repeat step 5 and step 6 until all commands you want have been learned.

Press one of the Mode buttons on the DISH Network remote to end the learning sequence. This saves all the commands for that mode and exits learning to return to normal remote control operation.

To cancel learning, do not press any buttons on either remote control for at least 30 seconds. The

DISH Network remote control times out and returns to normal operation.

Note : If the remote control batteries are too low for learning, all the Mode buttons blink quickly eight times. Learning ends without saving learned commands, and the remote returns to normal operation. Change the batteries and begin learning again.

Note : No learned commands are saved if the DISH

Network remote control times out before completion.

Discrete Codes

Discrete On and Off IR-only remote-control commands are used by installers when programming macro commands into universal remotes. Using an On-only or Off-only command is more effective than a toggle On/Off command when trying to ensure the receiver is reliably in one state or the other.

1 Program the DISH

Network remote to the desired remote address

(see Changing the Remote and Receiver Address, page 28).

Hold SAT until all Mode buttons light, then release the button.

Press POWER (not TV

POWER).

Press VOLUME UP for discrete power on. Press

VOLUME DOWN for discrete power off.

Press any other button when done to end this procedure.

Changing the Remote and

Receiver Address

If you notice that your receiver is changing channels or opening menus, but you’re not using the remote control, changing the address should fix the problem.

1 Press SYSTEM INFO on the receiver’s front panel.

Write down the TV2 remote address shown on the System Info screen.

Press and hold SAT on your remote control for about three seconds, until all the Mode buttons light up, and then release SAT.

3 Add one to the address that you wrote down in step 1, and use the

NUMBER PAD to enter that number (between 1 and 28).

Press POUND (#).

Press RECORD.

Press several buttons on the remote to make sure it is working as expected.

TV Codes

Note: If programming a second TV in AUX mode, press 0 before entering the TV code.

Abex 658

ABS 721

Accurian 623

Acer 511

Admiral 514 521 532 533 572

665 675 726 739 740 834 835

Advent 502 653 842 912

Aiko 524 727 778

Aiwa 667

Akai 506 520 592 601 612 622

627 652 680 684 738 750 754

794 795 807 808 858 865 866

906 907 908

Alaron 532

Albatron 692 804

Alienware 721

A-Mark 804

America Action 541 657 682

Ampro 691

Amtron 657

Anam 541 657 682

Anam National 541 657

AOC 505 506 519 520 582 620

627 653 654 913

Apex Digital 542 552 574 595

743 744 745 757 759 771 815

Archer 804

Astar 594

ASA 514 665

Audiovox 524 528 531 541

565 623 624 657 678 682 697

719 727 778 810 816 832

Autovox 514 665

Aventura 527 569 694 733

841 846

Axion 636

Bang & Olufsen 514 665

Barco 770 824 825 826 828

Baycraft 536

Baysonic 682

Belcor 505 627 773

Bell & Howell 590 611 675 683

Benq 511 535

Bradford 541 657 682

Brillian 558

Brionvega 514 665

Brockwood 505 627

Broksonic 533 622 648 682

726 748 750 752 754 834 865

866 899 908 byd:sign 792

C & M 804

Candle 506 520 523 536 627

654

Capehart 627

Carnivale 506 520 627

Carver 621 656 674 761 792

818 897

CCE 528 816

Celebrity 500 640 652 677 758

781 783 795 797 798 837 844

Celera 743 744 745 815

Century 514 665

Changhong 743 744 745 815

Cineral 697

Circuit City 627

Citizen 506 516 520 523 524

536 590 622 627 654 655 657

658 664 680 702 727 750 754

778 865 866 908

Clarion 541 657 682

Coby 607 626 633

Colortyme 627 654

Colt 660

Table continued on next page

TV Codes, continued

Commercial Solutions 503 522

645 650 749 776 779 805 830 831

859 863 864

Concerto 523 627 654

Contec 541 655 657 658 682

Craig 536 541 657 682 694

Crosley 500 621 640 656 674

677 758 761 781 783 792 795

797 798 818 837 844 897

Crown 536 541 655 656 657

658 682 702 761

CTX 804

Curtis 537 539 573 903 915

Curtis Mathes 503 506 516

520 521 528 530 531 572 590

611 621 627 641 645 650 654

655 656 658 674 675 680 683

697 702 719 738 739 740 749

755 761 776 792 794 818 830

832 863 864 897

CXC 541 657 682

CyberPower 721

Cytron 537 539 903 904

Daewoo 505 524 528 530 531

590 611 627 630 653 654 655

658 664 684 697 702 719 727

778 816 832 853

Daytron 505 627 654 658

Dell 518 676 772 773 774

Delta 909

Denon 786

Diamond Vision 546 643 659

Dimensia 503 645 830

DISH Network 742

Disney 529 559

Dixi 566 761 897

Dumont 501 505 627 711 775

813

Durabrand 527 529 533 541

559 564 569 587 627 632 657

682 694 718 726 733 834 841

843 846

Dwin 572 739

Dynex 538 585 698 701 706

EchoStar 742 763

Table continued on next page

Electroband 500 640 652 677

758 781 783 795 797 798 837

844

Electrograph 507 581 609 710

746 753 763 801

Electrohome 533 627 652 654

726 795 834

Element 567 568 591 669 723

724 902

Emerson 505 527 528 529 530

531 532 533 536 541 559 564

569 587 590 611 618 627 632

643 646 654 655 657 658 664

668 672 679 682 683 694 697

702 718 719 726 733 748 752

756 764 767 777 816 829 832

834 838 839 841 846 899

Emprex 597

Envision 506 519 520 620

627 654

Epson 708

ESA 527 569 587 601 618 632

646 679 694 733 767 777 829

838 839 841 846

Fisher 590 595 611 683

Fujitsu 532 536 602 603 694

Funai 500 527 532 541 569

587 618 640 657 677 679 682

694 733 756 758 777 781 783

795 797 798 829 837 838 839

841 844 846

Futuretech 541 657 682 694

Gateway 507 511 535 581 609

710 721 746 753 763 801

General Electric 503 508 522

528 531 544 564 627 645 650

654 661 690 697 718 719 742

749 776 779 805 830 831 832

859 863 864

GFM 527 529 559 569 618

679 694 733 777 829 838 839

841 846

TV Codes, continued

Gibralter 501 505 506 520 627

711 775 813

Go Video 696

Goldi 566

Goldstar 505 506 520 523 564

566 627 653 654 655 658 702

718 720 761 897

GPX 532

Gradiente 540

Granada 627

Grand 627

Grundig 603

Grunpy 532 541 657 682

Haier 515 571 693 843

Hallmark 564 627 654 718

Harley Davidson 532 756

Harman/Kardon 621 627 656

674 761 792 818 897

Harvard 541 657 682

Havermy 521 572 739 740

Helios 901 905

Hello Kitty 528 531 697 719

832

Hewlett Packard 599 712 721

911

Hisense 759

Hitachi 517 523 547 549 554

555 606 627 637 638 654 655

658 675 688 709 756 786 788

789 790 791

Howard Computers 721

HP 599 712 721 911

Hush 721

Hyundai 695 iBUYPOWER 721

Ilo 529 559 588 596 625 668

764

IMA 657

Infinity 566 621 656 674 761

792 818 897

InFocus 616

Initial 596 625

Insignia 527 533 537 538 539

543 550 553 569 585 618 671

679 694 698 701 726 728 733

Table continued on next page

751 766 773 777 809 829 834

838 839 841 846 857 903

Inteq 501 711 775 813

JBL 566 621 656 674 761 792

818 897

JC Penney see Penney

JCB 500 640 652 677 758 781

783 795 797 798 837 844

Jensen 502 537 539 627 653

654 842 903 912

JVC 508 517 533 557 570 642

649 655 658 662 688 713 714

715 726 735 736 737 812 817 834

Kawasho 627 652 654 795

KDS 591 669 902

KEC 541 657 682

Kenwood 505 506 520 627

654 716

KLH 595 743 744 745 815

Kloss 627 657

Konka 510

KTV 506 520 541 627 655 657

658 682 702

LG 501 503 522 545 553 564

615 627 650 653 654 693 711

718 720 730 766 773 775 779

804 805 809 813 830 831 859

Linksys 721

Lloyd’s 627 756

Lloytron 658

Loewe 566 656 761 897

Logik 675

Luce 699

Luxman 523 627 654

LXI 503 526 564 566 590 595

611 621 627 631 635 645 650

654 656 674 683 718 744 749

761 768 771 776 785 792 818

830 863 864 897

M. Wards see Wards

MAG 591 669 902

Magnasonic 664 756

TV Codes, continued

Magnavox 506 507 508 517

520 527 532 536 550 560 563

566 569 581 609 618 621 625

627 646 654 656 674 679 688

694 710 733 746 747 753 756

761 762 763 767 777 782 792

801 818 827 828 829 838 839

841 846 876 887 888 891 892

893 894 897

Magnin 661

Majestic 675

Marantz 506 520 550 560 563

566 604 608 621 627 654 656

674 747 761 792 818 836 897

Matsushita 512 577 619 634

685 689 700 729 734 765 780

784 819 820 821 822 823

Maxent 507 581 609 710 746

753 763 801

Media Center PC 721

Megapower 804

Megatron 564 627 654 718

Memorex 504 529 532 533

559 564 590 611 613 627 648

653 654 675 680 683 684 718

725 726 752 787 799 834 869

876 899

MGA 504 505 506 520 564

613 627 653 654 661 718 725

787 799

Microsoft 721

Midland 501 508 645 650 655

658 702 711 730 749 775 776

813 863 864

Mind 721

Mintek 596 625

Mitsubishi 504 505 517 521

564 572 613 614 627 653 654

688 718 725 739 740 787 799

Mitsui 769

Monivision 692 804

Montgomery Wards see

Wards

Motorola 521 572 739 740 835

Table continued on next page

MTC 505 506 516 520 523 627

653 654 680

Multitech 541 657 682

Multivision 810

NAD 526 564 595 627 631 635

637 654 718 744 768 771 785

NEC 505 506 517 520 523 604

608 610 627 653 654 687 688

731 732 904

NetTV 507 581 586 609 710

746 753 763 801

Nikkai 613

Nikko 506 520 524 564 627

654 718 727 778

Niveus Media 721

Norcent 519 579 759

Northgate 721

Norwood Micro 588

Noshi 681

Novabeam 627

NTC 524 727 778

Nyon 627

Olevia 523 564 578 580 654

910 914

Onwa 541 657 682

Optimus 512 577 590 611 619

634 637 685 689 700 729 734

756 765 780 784 819 820 821

822 823 869 876

Optonica 521 572 739 740 835

Orion 532 533 538 694 726

748 752 834 899

Panasonic 508 509 512 576

577 619 634 644 647 656 685

689 700 729 734 761 765 780

784 811 819 820 821 822 823

860 861 862 867 868 869 870

871 872 873 874 875 876 877

878 879 880 881 882 883 884

885 886 889 890 895 896 897

900

Panavision 734 811

TV Codes, continued

Penney 503 505 506 508 516

520 525 526 543 564 595 627

631 635 645 650 653 654 655

658 661 680 681 690 702 718

720 728 730 744 749 768 776

771 785 830 857 863 864

Petters 534

Philco 505 506 514 520 527

529 532 536 559 569 618 621

627 653 654 655 656 658 665

668 674 679 694 733 761 764

777 792 818 829 838 839 841

846 897

Philips 514 525 527 548 550

560 563 566 621 625 627 655

656 658 665 674 747 761 770

782 792 818 824 825 826 827

828 839 876 887 888 891 892

893 894 897

Pilot 505 506 520 627 655 658

702

Pioneer 547 561 576 604 608

627 637 654

Plasmsync 610

Polaroid 534 537 539 550 588

591 627 669 670 671 678 743

744 745 751 766 773 814 815

901 902 903 905

Portland 505 524 528 530 531

627 653 654 655 658 697 702

719 727 778 832

Price Club 680

Prima 502 653 673 674 842

912

Princeton 562 804

Prism 508

Proscan 503 506 520 522 645

650 705 742 749 776 779 805

830 831 859 863 864

Proton 536 564 627 654 655

658 718

Protron 589

Proview 591 669 902

Pulsar 501 505 627 711 775

813

Quasar 508 512 577 619 634

685 689 700 729 734 765 780

784 819 820 821 822 823 860

861 862 867 868 869 870 871

872 873 874 875 876 877 878

879 880 881 882 883 884 885

886 889 890 895 896

Radio Shack 503 505 506 520

541 564 590 611 627 645 650

655 657 658 662 682 683 702

718 749 756 776 830 863 864

RCA 503 505 508 521 522 530

544 547 627 630 636 637 639

641 645 650 651 653 654 661

671 681 686 690 740 742 749

751 776 779 805 830 831 859

863 864 902 916

Realistic 503 505 506 520 541

564 590 607 611 627 645 654

655 657 658 682 683 702 718

730 830

Ricavision 721

Runco 501 506 520 604 608

627 711 775 813

Sampo 506 507 520 581 609

627 654 655 658 702 710 746

753 763 801

Samsung 505 506 516 520

523 564 566 601 627 653 654

655 658 680 684 702 707 717

718 738 755 761 794 833 858

897

Samsux 655 658 702

Sansei 697

Sansui 527 533 569 622 694

726 733 748 750 752 754 756

834 841 846 865 866 899 908

Sanyo 517 590 611 621 627

656 661 674 683 688 761 792

818 840 897

SBR 566 761 897

Sceptre 677

Schneider 566 761 897

Scimitsu 505 773

Table continued on next page

TV Codes, continued

Scotch 564 627 654 718

Scott 505 532 541 564 627

654 655 657 658 682 718

Sears 503 523 526 527 532

558 564 569 590 595 611 621

627 631 635 645 650 654 656

658 674 683 694 718 733 744

749 756 761 768 771 776 785

792 818 830 841 846 863 864

897

Seimitsu 627

Semivox 682

Semp 595 771

Sharp 521 546 556 572 605

627 628 629 654 655 658 663

702 739 740 803 835 836 898

Sharper Image 703

Sheng Chia 521 572 739 740

Shogun 505 627

Signature 621 656 674 675

761 792 818 897

Simpson 536

Solavox 613

Sole 699

Sony 500 513 640 652 677

721 756 758 781 783 795 796

797 798 806 837 844 845

Soundesign 532 536 541 564

627 654 657 682 718

Spectricon 520 627

Spectroniq 591 669 902

Squareview 527 569 694 733

841 846

SSS 505 541 627 657 682

Stack 9 721

Starlite 541 657 682

Studio Experience 692

Superscan 521 572 583 646

739 740 741 767 777

Supra 523 627

Supreme 500 640 652 677

758 781 783 795 797 798 807

837 844

SVA 515 618 679 759 777 829

838 839 901 905

Table continued on next page

Sylvania 506 520 527 529 536

559 566 567 568 569 618 621

627 646 654 656 668 672 674

679 694 723 724 733 756 761

764 767 777 792 818 829 838

839 841 846 888 897

Symphonic 527 541 569 587

632 646 657 679 682 694 733

756 767 841 846

Syntax 523 558 564 578 580

654 910 914

Systemax 721

Tagar Systems 721

Tandy 521 572 739 740 835

Tatung 511 535 588

Teac 586

Technics 508 512 577 619 634

685 689 700 729 734 765 780

784 819 820 821 822 823

Technol ACE 532

Techview 590 683

Techwood 508 523 627 654

Teco 704

Teknika 504 505 512 516 523

524 532 536 541 613 621 627

644 653 654 655 656 657 658

674 675 680 682 685 702 725

727 761 778 787 792 799 818

897

Telecaption 688

Telefunken 738 794

Thomas 627 756

TMK 523 564 627 654 718

TNCi 501 711 775 813

Toshiba 516 517 526 590 595

610 611 615 617 622 631 635

644 666 680 683 688 721 744

750 754 755 768 771 785 793

800 802 847 848 849 850 851

852 854 855 865 866 908 909

Totevision 655 658 702

Touch 721

Toyomenko 627

TV Codes, continued

Trutech 529 559 584

TVS 533 726 834

Ultra 589

US Logic 588

V Inc . 562 575

Vector Research 506 520 627

VEOS 558

Victor 557 735 736 737

Vidikron 604 608 621 656 674

761 792 818 897

Vidtech 505 517 564 627 653

654 688 718

Viewsonic 507 551 562 575

579 581 582 583 600 606 609

620 710 721 741 746 753 760

763 789 796 801

Viore 907 915

Vizio 511 535 551 562 575 583

593 598 741 773

Voodoo 721

Wards 500 501 503 505 506

508 516 520 526 532 536 541

564 590 595 611 621 627 631

635 640 641 645 653 654 656

657 674 675 677 681 682 711

718 749 758 761 768 775 776

781 783 785 792 795 797 798

813 818 830 837 844 863 864

897

Waycon 526 595 631 635 768

785

Westinghouse 528 531 551

562 574 575 652 697 719 795

797 798 809 832 856

White Westinghouse 528 530

533 726 816 832 834

Yamaha 505 506 520 606 627

653 654 789

York 627

Zenith 500 501 506 520 524

530 533 553 555 564 615 627

638 640 645 675 677 711 718

720 726 727 748 749 752 756

758 766 773 775 776 778 781

783 795 797 798 809 813 834

837 844 853 863 864 899

Zonda 804

ZT Group 721

VCR Codes

This table contains the manufacturer codes for programming the remote control to operate your VCR. If your VCR brand is not listed or if the codes do not work, the remote may not control your VCR. In some cases, codes may operate some, but not all, buttons shown in this guide.

Note : If programming your VCR in AUX mode, press 1 before entering the VCR code.

ABS 792

Accurian 544 588

Admiral 607 918

Adventura 544 588 594

Aiwa 501 512 544 588 594

676 678

Akai 513 515 516 518 525 568

682 772

Alienware 792

Allegro 502 522 529 533 678

779

American High 554

Americast 917

Apex Digital 517 851

ASA 556 801

Asha 591 675

Audio Dynamics 592

Audiovox 512 676 678

Bang & Olufsen 794

Beaumark 591 675

Bell & Howell 549 581

Broksonic 506 508 511 515 516

525 550 559

Calix 512 676 678

Candle 534 592 594 675 676

678

Canon 554

CineVision 502 522 529 678

779

Citizen 512 515 516 525 534

536 591 592 594 675 676 678

796

Colortyme 592

Craig 512 591 675 676 678

789

Crosley 544 588

Curtis Mathes 513 528 554

585 591 592 594 605 607 614

628 649 675 682 773 774

Cybernex 591 675

Cyberpower 792

Daewoo 502 522 529 534 536

559 588 678 779 796

Davidson 544 594

DBX 592

Dell 792

DiamondVision 532 641

Dimensia 585 607 649

Dumont 549

Durabrand 533 592 594

Dynatech 544 588 594

Electrohome 512 567 676 678

Electrophonic 512 676 678

Emerson 506 508 512 518 519

531 534 536 544 550 554 559

567 568 588 594 676 678 756

796 798 803 804

Emerex 500 790

ESA 502 522 529 531 678 779

803 804

Finlandia 549

Finlux 549 556 801

Fisher 549 581 789

Fuji 554 772

Funai 519 544 588 594 756

798 803 804

Garrard 544 588 594

Gateway 792

General Electric 528 541 554

585 591 605 607 649 675 773

774

GFM 519 803

Table continued on next page

VCR Codes, continued

Go Video 502 507 522 524

529 591 675 678 779 912

Goldstar 502 507 512 522 529

592 594 676 678 779

Goodmans 585

Gradiente 544 588 594

Granada 549

Grundig 556 801

Harley Davidson 544 588 594

Harman/Kardon 568 592 594

Headquarter 581

Hewlett Packard/HP 792

Hi-Q 789

Hitachi 513 514 544 588 594

595 682 776

Howard Computers 792

HP see Hewlett Packard

Humax 521 910 911

Hush 792 iBUYPOWER 792

Insignia 507 803

Instant Replay 554

ITT 675

JC Penney see Penney

JCL 554

Jensen 513 595 682 776

JVC 513 523 526 527 545 561

562 581 592 594 682 795

KEC 512 676 678

Kenwood 513 523 526 527 562

581 592 594 682 795

Kodak 512 554 676 678

LG 502 507 522 529 676 678

779

Linksys 792

Lloyd’s 544 588 594

Luxor 567

LXI 512 676 678

M. Wards see Wards

Magnasonic 536 756 796

Magnavox 519 531 533 544

554 556 588 594 756 783 797

798 801 803 804

Magnin 591 675 676 678

Table continued on next page

Marantz 554 556 581 585 592

594 801

Marta 512 676 678

Matsushita 554 614 628 799

806

Media Center PC 792

MEI 554

Memorex 506 512 515 516

525 533 544 549 550 554 581

585 588 591 594 607 614 628

675 676 678 770 771 777 780

781 782 784 786 787 788 789

799 806 809 918

MGA 512 567 568 591 675

MGN Technology 591 675

Microsoft 792

Midland 591

Mind 792

Minolta 595 776

Mitsubishi 512 523 526 527

562 567 568 595 607 776 795

Montgomery Wards see

Wards

Motorola 554 607 918

MTC 544 588 591 594 675

Multitech 544 588 591 594

NAD 507

NEC 513 523 526 527 549 562

581 592 594 682 795

Nikko 512 676 678

Nikon 791

Niveus Media 792

Noblex 591 675

Northgate 792

Olympus 554

Onkyo 783

Optimus 512 549 581 607 614

628 676 678 756 770 771 777

780 781 782 784 786 787 788

799 806 809 918

Optonica 585

Orion 550 559

VCR Codes, continued

Panasonic 554 614 628 672

770 771 777 780 781 782 783

784 786 787 788 791 799 806

809 810 912

Penney 512 554 581 591 592

594 595 675 676 678 776

Pentax 594 595 776

Pentex Research 592 594

Philco 554

Philips 520 554 556 585 783

801 803 804 911

Pilot 512 676 678

Pioneer 523 526 527 562 776

795

Polaroid 517 530

Presidian 519 804

Profitronic 591 675

Proscan 528 585 605 607 649

773 774

Pulsar 533

Quarter 581

Quartz 581

Quasar 554 614 628 770 771

786 799 806

RadioShack 512 544 581 588

594 676 678

Radix 512 676 678

Randex 512 676 678

RCA 518 528 539 541 554 585

591 595 605 607 649 675 773

774 775 776

Realistic 512 534 544 549 554

581 585 588 594 607 676 678

789 918

Ricavision 792

Ricoh 791

Rio 502 522 529 678 779

Runco 533

Salora 567

Samsung 506 524 534 591

675 755 807

Sanky 533 607 918

Sansui 513 515 516 523 525

526 527 544 550 562 588 594

682 795

Sanyo 515 516 525 549 581

591 675 789

SBR 556 801

Sceptre 549 581

Scott 508 534 559 567

Sears 512 544 549 554 581

588 594 595 676 678 776 789

Sharp 512 585 607 918

Shintom 595 772

Shogun 591 675

Singer 554 791

Signature 554

Sonic Blue 502 522 529 678

779 907 912

Sony 500 544 554 588 594

768 772 778 790 791 792 919

Stack 9 792

STS 554

Superscan 531 798 804

Sylvania 519 531 544 554 556

567 588 594 756 797 798 801

803 804

Symphonic 519 531 544 588

594 756 804

Systemax 792

Tagar Systems 792

Tandy 581

Tashiko 512 676 678

Tatung 513 682

Teac 513 544 588 594 682

Technics 554 614 628

Teknika 512 544 554 588 594

676 678

Thomas 544 588 594

Tivo 510 520 521 537 548 905

906 908 909 910 911

TMK 591 675

Toshiba 513 515 516 525 534

537 538 542 543 567 682 769

776 783 792

Totevision 512 591 675 676

678

Touch 792

Table continued on next page

VCR Codes, continued

UltimateTV 649

Unitech 591 675

Urban Concepts 672 783

Vector Research 534 592 594

Victor 561 562

Video Concepts 534 568 592

Videomagic 512 676 678

Videosonic 591 675

Viewsonic 792

Villain 544 588 594

Voodoo 792

Wards 512 528 533 534 544

554 585 588 591 592 594 595

605 607 649 675 676 678 772

773 774 776 789 918

White Westinghouse 588

XR-1000 544 554 588 594

Yamaha 581 592 594 682

Zenith 500 502 507 512 522

529 533 544 588 594 678 772

779 783 791

ZT Group 792

DVD Player Codes

This table contains the manufacturer codes for programming the remote control to operate your DVD Player. If your DVD

Player brand is not listed or if the codes do not work, the remote may not control your DVD Player. In some cases, codes may operate some, but not all, buttons shown in this guide. Note: If programming a DVD Player in AUX mode, press 1 before entering the DVD Player code.

Accurian 602 617 619 658 661

674 764 829

Advent 572 759

Aiwa 694

Akai 646 656 709 725 740 751

752 754 814 815

Alco 765

Allegro 626 683

Amphion Media Works 586

711

AMW 586 711

Anam 688

Apex Digital 580 589 635 654

655 666 710 744 757 835 839

851

Apple 642

Archos 885

Arrgo 833

Aspire Digital 558 598

Astar 612

Audiovox 580 589 630 666 710

765 826 835 837

Axion 867

B&K 701

Bang & Olufsen 569 580

BBK 566

Bel Canto Design 719 878

Blaupunkt 580 589 666 710

835

Blue Parade 719

BOSE 758 811

Broksonic 646 656 709 725

752 754 814 815

California Audio Labs 662 697

699 716 733 737 840 841 855

Cambridge SoundWorks 870

CAVS 708

CineVision 626 683

Citizen 646 656 709 725 754

814 815

Classic 695 826 882

Coby 557 634 636 761

Criterion 712

Curtis 685

Curtis Mathes 684

CyberHome 833

Cytron 904

Daewoo 626 630 657 683 852

859

Daytek 711

Denon 578 662 697 699 700

716 718 733 737 840 841 855

892

Desay 598

Diamond Vision 637 641

Disney 617 619 658 661 674

764 829

Dual 871

Durabrand 826 833 848

DVD2000 699 716

Eltax 685

Emerson 570 617 619 631 639

645 650 651 658 661 674 679

764 829

Enterprise 824

ESA 570 587 631 639 650 651

679

Eastech 587

Entiveo 587

Fisher 609 659 705

Funai 570 617 619 631 658

661 674 679 764 829

Gateway 610 870

Table continued on next page

DVD Player Codes, continued

General Electric 580 589 616

666 702 703 710 720 749 816

835 842

GFM 570 617 619 631 658 661

674 679 764 829

Go Video 610 611 615 626 673

683 691 692 693 741 820 821

822 824 826 896 899

Goldstar 611 615 626 673 683

824 899

GPX 704 826 882

Gradiente 699 716 723 745

Greenhill 580 589 666 710 835

Grundig 565 577 630 852 874

Harman/Kardon 715

Hitachi 606 652 660 668 705

706 707 823 844 860 866

Hiteker 654 655 744 839 iLive 856

Ilo 837

Initial 580 589 666 710 835

837

Insignia 570 617 619 631 647

658 661 673 674 679 717 738

764 824 829 857 871

Integra 551 583 584 719 890

Irradio 601 608

Jamo 728

JBL 715

Jensen 557 759

JMB 656 815

JVC 553 603 604 620 621 622

623 625 689 746 850 861 862

863 872 898

Jwin 742

Kawasaki 765

Kendo 848

Kenwood 579 662 697 699 700

716 733 737 840 841 855

KLH 580 589 666 710 765 835

Konka 753

Koss 564 723 745 873

Lasonic 593

Landel 680

Lenoxx 560 826

Table continued on next page

Lexicon 743

LG 611 615 626 673 683 824

899

Lifetec 634

Liquid Video 564

Liteon 602 610

Logix 852

Lumatron 673 824

Luxman 844

Luxor 848

Magnavox 565 570 572 577 601

608 617 619 631 639 650 651 658

661 672 674 679 764 803 804 829

854 874

Marantz 565 577 874

McIntosh 830 831 832 836

838 843 858

Memorex 646 656 658 709

725 754 760 814 815

Microsoft 576 616 702 703

720 749 816 842

Mintek 580 589 666 681 710

835

Mitsubishi 767

Momitsu 748

NAD 507 611 615 664 673 824

899

Nakamichi 596

Nesa 580 589 666 710 835

Next Base 680

Nexxtech 599 871

Niro 750

Norcent 634 711 871

Onkyo 551 583 584 672 890

Oppo 566 878 885

Oritron 564 723 745

Panasonic 624 627 638 662

663 672 687 697 699 714 716

733 734 737 813 840 841 855

Philco 617 619 658 661 674

764 829

DVD Player Codes, continued

Philips 565 572 574 577 601

608 610 617 619 658 661 672

674 698 713 743 764 766 829

848 854 873 874

Pioneer 653 665 686 719 812

877 878 879 880

Polaroid 586 617 635 636 640

647 651 677 851

Polk Audio 565 577 874

Portland 751

Presidian 617 619 658 661

674 764 829

Prima 759

Proceed 654 655 744 839

Proscan 616 702 703 720 749

816 842

Provision 761

Pye 674

Qwestar 723 745

RCA 580 583 584 589 616 647

666 688 690 702 703 710 719

720 749 760 765 816 835 842

867 901

Regent 560

Rio 626 683

Rotel 553 850 861 862 863

Rowa 555

Saba 762

Sampo 724 865

Samsung 571 606 643 644

652 662 667 668 691 693 697

699 716 733 737 740 741 747

805 820 821 823 840 841 844

845 849 855 864 866 869 875

881 895 896 900

Sansui 646 656 709 725 754

814 815

Sanyo 609 646 656 659 705

709 725 754 814 815

Schneider 601 608

Sensory Science 610

Sharp 573 617 619 658 661

669 674 696 727 750 764 829

865 903

Sharper Image 763

Sherwood 751 870

Sherwood Newcastle 870

Shinco 589

Shinsonic 681 731 837

SonicBlue 626 683

Sony 582 613 618 632 670

671 729 730 731 817 818 827

830 831 832 836 838 843 846

847 858 868 883 884 902

Sungale 597

Superscan 531 570 639 650

651 803 804

SVA 800

Sylvania 531 570 617 619 631

639 645 650 651 658 661 674

679 764 803 804 829

Symphonic 531 617 619 639

650 651 658 661 674 764 803

804 829

Teac 732 765

Technics 662 697 699 716 733

737 840 841 855

Technosonic 886

Techwood 664

Terapin 887

Theta Digital 719

TiVo 888

Toshiba 575 583 584 646 648

656 672 709 721 725 735 736

754 814 815 819 825 828 834

876 888 893 894

Trutech 833

Urban Concepts 672

US Logic 681

Venturer 765

Vizio 726 897

Westinghouse 629

Xbox 576 616 702 703 720

749 816 842

Yamaha 565 577 601 602 608

662 697 699 716 733 737 739

840 841 853 855 874 889 891

YBA 711

Zenith 611 615 626 672 673

683 824 899

Tuner/Amplifier Codes

This table contains the manufacturer codes for programming the remote control to operate your tuner/amplifier. If your tuner/amplifier is not listed or if the codes do not work, the remote may not control your turner/amplifier. In some cases, codes may operate some, but not all, buttons shown in this guide. Note: If programming a tuner/amplifier in AUX mode, press 2 before entering the Tuner/Amplifier code.

Accuphase 690

Acoustic Research 703 853

Acurus 691

ADC 652 664

Adcom 644 673

Admiral 747

ADS 748

Advent 860

Aiwa 636 667 681 683 685

718 720 725 730 839

Akai 740

Alco 659

Altec Lansing 738

AMC 770 855

Amphion Media Works 660

Amplifier Technologies 710

AMW 660

Anam 653 776

Angstrom 692

Anthem 750

Apex Digital 812

Aragon 691

Arcam 725 726

Atlantic Technology 712

Audio Research 751

AudioSource 693

Audiotronic 685

Audiovox 659 826

B&K 752

Bang & Olufsen 676

Bel Canto Design 694 710

BOSE 639 656 704 753 761

Boston Acoustics 713

Brumester 647

California Audio Labs 686

Cambridge SoundWorks 831

Capetronic 652 664 798

Carver 681 685 718 720 725

Cary Audio Design 689

Casio 717

CCE 802

Cinema Sound 696

Clarinette 717

Classe 697

Classic 802 819

Coby 679 728 731 780 811

815 834

Counterpoint 754

Craig 856

Creative 723

Criterion 734

Crown 857

Curtis 731 777 780 811 815

Curtis Mathes 772

Daewoo 727

Dell 729

Denon 669 670 680 682 696

744 759 760 762 792 809

Dimensia 703 853

Durabrand 698

EAD 756

Eclipse 665

Elan 699

Emerson 820

Enlightened Audio Designs

756

ESA 757

Fisher 824 850

Fosgate 700 712

Garrard 758 851

Gateway 743 831 833

Glory Horse 728

Go Video 742

Table continued on next page

Tuner/Amplifier Codes, continued

Goldstar 814

GPX 834

Hafler 758

Harman/Kardon 640 685 714

725

Hitachi 850 iLive 835

Initial 735 789 826

Insignia 711 770 825

Integra 650 695 785 788 790

791 838

Jamo 837

JBL 642

JC Penney see Penney

Jensen 775 860

JVC 637 652 663 664 728 755

786 827 848

Kenwood 658 662 668 774

795 828 829 830 840

KLH 659 812

Klipsch 691

Knoll Systems 701

Koss 739

Lasonic 746

Left Coast 640

Lenoxx 698 736

Lexicon 724

LG 814 836

Linn 685 725

Liquid Video 739

Lloyd’s 717

Logitech 702

M. Wards see Wards

Magnavox 652 664 685 717

725

Magnum Dynalab 858

Marantz 640 645 685 725 764

787 854

Mark Levinson 705

McIntosh 645 706 764

MCS 719

Memorex 777

Midiland 707

Mitsubishi 859

Modulaire 717

Mondial 691

Table continued on next page

Motorola 737

NAD 648

Nakamichi 649 658

NEC 641

Nexxtech 711 825

Nikko 708

Niro 779

Norcent 711 731 780 811 815

825 834

Nova 731 780 811 815 834

Omnifi 745

Onkyo 650 671 695 785 788 790

791 822 838

Optimus 635 652 653 664 772

775 798 824 842 845

Oritron 739

Outlaw 712

Panasonic 643 672 677 678

715 749 768 783 797 799 804

805 808 810 816 817 818 821

843

Parasound 647

Penney 717

Philco 781

Philips 640 685 716 721 725

726 751 860

Pioneer 635 652 664 666 675

767 772 798 806 813 842 844

845

Polaroid 679 812

Polk Audio 640 645 685 725

764

Prima 860

Proscan 703 852 853

Pyle 782

Quasar 799

RadioShack 728

RCA 635 652 653 659 664 675

703 719 772 776 842 845 852

853

Realistic 717 747

Regent 736

Rio 661 729

Rotel 674

Tuner/Amplifier Codes, continued

Saba 741

Samsung 688 807

Sansui 685 719 725

Sanyo 824 850

Sharp 832

Sharper Image 728

Sherwood 743 770 831 833

Sherwood Newcastle 743 833

Shinsonic 735 789 826

Shure 641

Sonic Blue 661 729 742

Sonic Frontiers 750

Sony 638 654 683 730 765 766

769 771 773 778 784 793 794

803 846

Soundesign 708

Soundmatters 763

SpeakerCraft 763

Stereophonics 635 842 845

Sunfire 658 840

Symphonic 747

TAG McLaren 796

Teac 653 659 851

Technics 643 672 768 804 805

808 810 843

Techwood 798

Thomson 800

Thorens 685

Toshiba 675 822

Vector Research 801

Venturer 659

Victor 637 827

Vizio 709 831

Wards 635 685 725 730 853

Yamaha 646 650 651 655 657

663 684 687 732 733 786 823

841 847 848 849

Yorx 708 717

Zenith 814

DVR Codes

This table contains the manufacturer codes for programming the remote control to operate your DVR. If your DVR brand is not listed or if the codes do not work, the remote may not control your DVR. In some cases, codes may operate some, but not all, buttons shown in this guide. Note: If programming a DVR in AUX mode, press 1 before entering the DVR code.

ABS 792

Alienware 792

Americast 917

Bang & Olufsen 794

BellSouth 917

CyberPower 792

Dell 792

Director 913

Gateway 792 870

General Instrument 913

GOI 722

Hewlett Packard 792

HNS 521

Howard Computers 792

HP 792

HTS 722

Hughes Network Systems

521 910

Humax 910

Hush 792 iBUYPOWER 792

Jerrold 913

JVC 722 746

Linksys 792

Media Center PC 792

Microsoft 576 616 702 703

792 842

Mind 792

Motorola 913

Niveus Media 792

Northgate 792

Pace 914

Panasonic 687 697 733 907

Philips 521 548 574 601 608

610 619 658 661 674 698 713

743 829 848 854 906 910

Pioneer 653 686 878 914

Proscan 616 702 703 842 916

RCA 521 580 583 584 589 647

688 702 703 710 760 867 911

916

ReplayTV 907 912

Samsung 521 662 693 697

733 737 747 823 840 841 855

864

Scientific Atlanta 914

Sharp 573 619 658 661 674

696 750 764 829

Sonic Blue 626 907

Sony 510 792 905 908 909

Stack 9 792

Supercable 915

Systemax 792

Tagar Systems 792

Tivo 510 520 548 905 906 908

909 910 911

Toshiba 709 721 725 754 792

876 888

Touch 792

UltimateTV 916

Viewsonic 792

Voodoo 792

Zenith 615 626 683 899 917

ZT Group 792

Combo Codes

This following tables contain the manufacturer codes for programming the remote control to operate combined devices. If your combined device brand is not listed or if the codes do not work, the remote may not control your combined device. In some cases, codes may operate some, but not all, buttons shown in this guide.

TV/VCR Codes

Note : Program the remote control in TV mode using the TV code and then in DVD mode (or in AUX─press 1 before entering the VCR code) using the VCR code.

Aiwa

TV Code 667

VCR Code 501

America Action

TV Code 541 657 662 682

Audiovox

TV Code 541 657 662 682

Bang & Olufsen

TV Code 665

VCR Code 537

Broksonic

TV Code 748 752 899

Citizen

TV Code 664

VCR Code 536 796

Colt

TV Code 660

VCR Code 535

Curtis Mathes

TV Code 755

Daewoo

TV Code 664

VCR Code 536 796

Emerson

General Electric

TV Code 645 661 749 776

863 864

VCR Code 591 675

GoldStar

VCR Code 676

Gradiente

TV Code 540

Harley Davidson

TV Code 756

VCR Code 533 544 588

Hitachi

TV Code 756

VCR Code 533 544 588

JVC

TV Code 557 649 735 736

737

VCR Code 545

Lloyd’s

TV Code 756

VCR Code 533 544 588

Magnasonic

TV Code 664 756

VCR Code 536 756 796

TV Code 664 748 752 756

899

VCR Code 536 756 796

Funai

TV Code 756

VCR Code 533 544 588

Magnin

TV Code 661

VCR Code 591 675

MGA

TV Code 661

VCR Code 591 675

Table continued on next page

Combo Codes, continued

Magnavox

TV Code 756 876 887

888 891 892

893 894

VCR Code 533 544 588

756 797

Memorex

TV Code 869

VCR Code 614 628 676

770 771 777

780 781 782

783 784 786

787 788 799

806 809

Optimus

TV Code 756 869

VCR Code 614 628 756

770 771 777

780 781 782

783 784 786

787 788 799

806 809

Orion

TV Code 748 752 899

Pansonic

TV Code 647 765 811

860 861 862

867 868 869

870 871 872

873 874 875

877 878 879

880 881 882

883 884 885

886 889 890

895 900

VCR Code 614 628 770

771 777 780

781 782 783

784 786 787

788 799 806

809

TV/VCR Codes, continued

Penney

TV Code 661

VCR Code 591 675 676

Philips

TV Code 876 887 891 892

893 894

VCR Code 801

RadioShack

TV Code 756

VCR Code 533 544 588

Quasar

TV Code 860 868 869 870

VCR Code 614 628 799 806

RCA

TV Code 641 645 661 776

863 864

VCR Code 591 675

Samsung

TV Code 755

VCR Code 755 775 807

Sansui

TV Code 748 752 756 899

VCR Code 533 544 588

Sanyo

TV Code 661

VCR Code 591 675

Sears

TV Code 756

VCR Code 533 544 588 676

Sharp

TV Code 521 546 556 740

Sony

TV Code 500 640 677 756

758 781 783 795

797 798 837 844

VCR Code 533 544 588

Sylvania

TV Code 887 888 891 892

893 894

VCR Code 797

Table continued on next page

Combo Codes, continued

TV/VCR Codes, continued

Symphonic

TV Code 756

VCR Code 533 544 588 756

Thomas

TV Code 756

VCR Code 533 544 588

Toshiba

TV Code 617 666 755

VCR Code 538 542 543 769

776

Zenith

TV Code 748 752 756 899

VCR Code 533 544 588

Combo Codes, continued

TV/DVD Codes

Note : Program the remote control in TV mode using the TV code and then in DVD mode (or in

AUX─press 1 before entering the DVD code) using the DVD code.

Accurian

TV Code 623

AEG

TV Code 624

Advent

DVD Code 759

Akai

TV Code 612 622 624 750

754 807 808 865

866 906 908

DVD Code 515 516 525 646

656 709 725 754

814 815

Apex Digital

TV Code 552

DVD Code 635 757

Audiovox

TV Code 624

DVD Code 630

Axion

TV Code 636

DVD Code 867

Broksonic

TV Code 622 754 865 866

908

DVD Code 515 516 525 646

656 709 725 752

754 814 815

Bush

TV Code 750 754

DVD Code 634

Citizen

TV Code 622 750 754 865

866 908

DVD Code 515 516 525 646

656 709 725 754

814 815

Conia

TV Code 743 815

Coby

DVD Code 634 636

Curtis

TV Code 573

Cytron

TV Code 904

DVD Code 904

Denver

TV Code 624

Diamond Vision

TV Code 643

DVD Code 637

Dynex

TV Code 698 701 706

Emerson

TV Code 618 643 668 672

679

764 777 829 838

839

DVD Code 570 617 619 631

645 658 661 674

679 764 829

ESA

TV Code 618 679 777 829

838 839

DVD Code 570 631 679

Funai

TV Code 618 679 777 829

838 839

DVD Code 570 631 679

GFM

TV Code 618 679 777 829

838 839

DVD Code 570 631 679

Goodmans

DVD Code 634

Grundig

TV Code 750 754

Table continued on next page

Combo Codes, continued

TV/DVD Codes, continued

Haier

TV Code 693

Hitachi

TV Code 786 788 790 791 iLo

TV Code 625

Initial

TV Code 625

Insignia

TV Code 618 671 679 698

751 777 829 838

839

DVD Code 570 631 647 679

Jensen

DVD Code 759

JVC

TV Code 662

Konka

TV Code 510

DVD Code 753

TV Code 553 561 766 773

809

Magnavox

TV Code 618 625 646 679

767 777 782 829

838 839

DVD Code 570 631 679

Mintek

TV Code 625

Mirror

DVD Code 634

Panasonic

TV Code 644 811 869

DVD Code 663

Polaroid

TV Code 534 678 751

DVD Code 635 636 647 677

Prima

DVD Code 759

RCA

TV Code 503 522 636 637

639 650 671 742

751 763 779 805

831 859

DVD Code 647 867

Samsung

TV Code 680 684

DVD Code 740

Sansui

TV Code 622 750 865 866

908

DVD Code 515 516 525 646

709 725 775 814

815

Sharp

TV Code 546 556 605 898

DVD Code 573

Sylvania

TV Code 567 568 618 668

672 679 723 724

764 777 829 838

839

DVD Code 570 617 619 631

645 658 661 674

679 764 829 815

Toshiba

TV Code 622 666 750 754

Viore

771 793 802 847

848 849 850 851

852 854 855 865

866 908

DVD Code 515 516 525 646

648 656 709 725

754 814 815

TV Code 915

Westinghouse

DVD Code 629

Combo Codes, continued

DVD/VCR Codes

Note : Program the remote control in DVD mode using one of the listed DVD codes, and then in AUX mode, first pressing 1 and then using the listed VCR code.

Accurian

DVD Code 617 619 658 661

674 764 829

VCR Code 533 544 588

Allegro

DVD Code 626 683

VCR Code 502 522 529 678

779

Apex Digital

DVD Code 517 851

VCR Code 517 851

Broksonic

DVD Code 515 516 525 646

656 709 725 754

814 815

VCR Code 511

CineVision

DVD Code 626 683

VCR Code 502 522 529 678

779

Daewoo

DVD Code 626 683

VCR Code 502 522 529 678

779

Emerson

DVD Code 617 619 658 661

674 764 829

VCR Code 519

Funai

DVD Code 617 619 658 661

674 764 829

VCR Code 519

GFM

DVD Code 617 619 658 661

674 764 829

VCR Code 519

Go Video

DVD Code 507 524 611 615

626 673 683 692

691 693 741 820

821 822 824 896

899

VCR Code 502 522 529 678

779

GoldStar

DVD Code 507 611 615 673

824 899

VCR Code 502 522 529 678

779

Hitachi

DVD Code 660 706 707 860

VCR Code 533 544 588

JVC

DVD Code 622 623 689

VCR Code 503 561

DVD Code 507 611 615 673

824 899

VCR Code 502 522 529 678

779

Magnavox

DVD Code 617 619 658 661

674 764 829

VCR Code 533 544 588 519

Memorex

DVD Code 515 516 525 646

656 709 725 754

814 815

Panasonic

DVD Code 624

VCR Code 777 780

Philips

DVD Code 617 619 658 661

674 764 829

Polaroid

DVD Code 517 851

VCR Code 517 851

Combo Codes, continued

DVD/VCR Codes, continued

Presidian

DVD Code 617 619 658 661

674 764 829

VCR Code 519

RCA

DVD Code 616 690 702 703

720 749 816 842

VCR Code 528 605 607 649

773 774

Rio

VCR Code 502 522 529 678

779

Samsung

DVD Code 524 667 691 693

741 820 821 896

Sansui

DVD Code 515 516 525 646

656 709 725 754

814 815

VCR Code 515

Sanyo

DVD Code 609 659

VCR Code 549 581

Sharp

DVD Code 573 669 727 903

VCR Code 573 585

Sony

DVD Code 613 618 629 729

730 731 768 778

817 818 847 883

VCR Code 618 768 778

Sylvania

DVD Code 617 619 658 661

674 764 829

VCR Code 519 533 544 588

756

Symphonic

DVD Code 617 619 658 661

674 764 829

VCR Code 519 533 544 588

Toshiba

DVD Code 575 672 735 736

819 825 828 834

888

VCR Code 672 783

Zenith

DVD Code 507 611 615 626

673 683 824 899

VCR Code 502 522 529 678

779

TV/DVD/Tuner Codes

Note : Program the remote control in TV mode using the

TV code and then in DVD mode and then in AUX mode

(press 2 before entering the tuner code) using the tuner code.

Panasonic

TV Code 811

DVD Code 734

Tuner Code 678

Combo Codes, continued

TV/DVD/VCR Codes

Note : Program the remote control in TV mode using the TV code and then in DVD mode using the DVD code, and then in AUX mode (press 1 before entering the VCR code) using the VCR code.

Akai

TV Code 680 684

DVD Code 740

Broksonic

TV Code 648

DVD Code 656 752

Diamond Vision

TV Code 659

DVD Code 532 641

VCR Code 532 641

Emerson

TV Code 646 767

DVD Code 531 570 639 650

651 803 804

ESA

TV Code 646 747

DVD Code 531 570 639 650

651 803 804

Insignia

TV Code 618 679 777 829

838 839

Funai

VCR Code 531 798

Magnavox

TV Code 618 646 679 767

777 829 838 839

DVD Code 531 570 639 650

651 803 804

VCR Code 531 798

Memorex

TV Code 648

Panasonic

TV Code 647 811 860 861

862 867 868 869

870 871 872 873

874 875 876 877

878 879 880 881

882 883 884 885

886 889 890 895

896 900

DVD Code 638 734 810 813

VCR Code 810 813

Polaroid

DVD Code 530 640

VCR Code 530 640

RCA

DVD Code 541 775 901

VCR Code 541 775 901

Samsung

TV Code 680 684

Sharp

DVD Code 573 669 727 903

VCR Code 573

Superscan

DVD Code 531 570 639 650

651 803 804

Sylvania

TV Code 646 767

DVD Code 531 570 639 650

651 803 804

Symphonic

TV Code 646 767

DVD Code 531 570 639 650

651 803 804

Toshiba

TV Code 617

DVD Code 893 894

Troubleshooting

Use this information if you have a problem using the remote. To solve a particular problem, do the following:

• Find the information that relates to the problem you are experiencing. Try the suggested solution for that problem.

• Make sure your remote control has fresh batteries. If you see the Remote Battery Low warning on your TV screen, it is time to change the batteries. Follow the instructions on page 2.

• Make sure you have a direct line of sight between the remote and the receiver.

• Visit www.dishnetwork.com

While performing a remote control procedure, the remote control stops working.

What to do: Start over again. If you don’t press a button for 20-30 seconds in a programming sequence, the remote shuts off its programming function.

When you press a button on the remote control, the equipment doesn’t do what you expect.

What to do: Point the remote control directly at the

TV, with no objects blocking the signal path. The remote control uses IR signals to control the receiver.

IR signals travel less than 40 feet, and cannot go through walls or other solid objects.

If the batteries are missing or dead, replace them with fresh AAA-size batteries. If the remote has fresh batteries, check whether you put them in correctly.

If you didn’t, take them out and put them in the right way.

When you try to enter TV programming mode, all the mode LEDs flash.

What to do: Replace the batteries (see page 2).

Troubleshooting, continued

Your remote control does not work well.

What to do: Move your receiver to different locations. For best results, place the receiver as high as possible, above all other equipment in your entertainment center. There may be IR interference from objects near the receiver.

Your picture is snowy (or black or blue).

What to do: Make sure your TV is tuned to the correct channel. You may have accidentally changed the channel on your TV. Check the Reference Table to see what channel your TV is tuned to. Program SAT

Auto-Tune to avoid this in the future (see SAT Auto-

Tune on page 16).

When you press the remote control MUTE or

VOLUME button, nothing happens.

What to do: Program the remote to control your TV.

See Programming Remote to Control Another Device on page 11 or page 13.

The receiver does things even though you haven’t pressed any remote control buttons.

What to do : See Changing the Remote and Receiver

Address on page 28 for instructions to correct the possibility of UHF signals from a neighbor’s remote controlling your receiver.

Your remote control isn’t working.

What to do: Make sure the remote control is in the correct mode (SAT, TV, DVD, or AUX).

Make sure you are using the correct remote control

(TV1 or TV2) for your locations (applicable to multiroom receivers only).

Change the batteries as described on page 2.

If you have a 21.1 remote, check the UHF/IR switch setting as described on page 1.

Troubleshooting, continued

Your UHF Pro remote control does not work well from far away.

What to do: Make sure the UHF antenna is connected to the receiver and not touching anything else.

Vary the angle of the receiver’s UHF antenna.

Locate the UHF antenna tip away from other electronics equipment or metal surfaces, even if separated by wooden shelving.

Move the receiver to different locations. For best results, place the receiver as high as possible, above all other equipment in your entertainment center.

Place the UHF antenna outside the entertainment center by using a coaxial cable to connect it to the receiver.

Move any nearby off-air antenna away from the UHF remote antenna. Do not place an off-air antenna on your receiver.

Your PIP (Picture-In-Picture) button isn’t working.

What to do: If your receiver isn’t in Single Mode, press the MODE button on the front panel (if available).

Verify your receiver has the PIP feature. If your receiver is not PIP capable, contact DISH Network about upgrading to a receiver with the PIP feature.

Limited Warranty

This Limited Warranty is a legal document. Keep it in a safe place. Remember to keep your Sales Receipt for warranty service. We will consider any items you return without a copy of the Proof of Purchase to be out of warranty.

This warranty extends only to the original user (“you,” “your”) of the DISH

Network remote control and is limited to the purchase price of the remote control. EchoStar Technologies L.L.C., formerly known as EchoStar

Technologies Corporation, and its affiliated companies (“we,” “our,” “us”) warrant this remote control against defects in materials or workmanship as follows.

For one year from the original date of purchase, if we find the remote control is defective subject to the limits of this warranty, we will replace the remote at no charge for parts or labor. We warrant any such work done against defects in materials or workmanship for the remaining part of the original warranty period.

This warranty does not cover installation of the DISH Network System; consumer instruction; physical set up or adjustment of any consumer electronic equipment; remote control batteries; signal reception problems; loss of use of the equipment; unused programming charges due to equipment malfunction; cosmetic damage; damage due to lightning, electrical or telephone line surges, fire, flood, or other acts of Nature; accident; misuse; abuse; repair or alteration by other than our factory service; negligence; commercial or institutional use; improper or neglected maintenance; equipment sold AS IS or WITH ALL FAULTS; equipment removal or reinstallation; shipping damage if the equipment was not packed and shipped in the manner we prescribe; nor equipment purchased, serviced, or operated outside the contiguous United States of America.

REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR

EXCLUSIVE REMEDY. WE SHALL NOT BE HELD LIABLE FOR ANY

INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY

EXPRESSED OR IMPLIED WARRANTY ON THIS DEVICE, NOR FOR ANY

INCIDENTAL OR CONSEQUENTIAL DAMAGE RESULTING FROM THE USE

OF, OR INABILITY TO USE, THIS DEVICE. UNDER NO CIRCUMSTANCES

SHALL OUR LIABILITY, IF ANY, EXCEED THE PURCHASE PRICE

PAID FOR THIS DEVICE. EXCEPT TO THE EXTENT PROHIBITED BY

APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE ON THIS DEVICE IS LIMITED IN

DURATION TO THE DURATION OF THIS WARRANTY. WE RESERVE THE

RIGHT TO REFUSE TO HONOR THIS WARRANTY IF WE DETERMINE

ANY OF THE ABOVE EXCEPTIONS TO HAVE CAUSED THIS DEVICE NOT

TO HAVE PERFORMED PROPERLY. THIS WARRANTY SHALL BE VOID IF

ANY FACTORY-APPLIED IDENTIFICATION MARK, INCLUDING BUT NOT

LIMITED TO SERIAL OR CONDITIONAL ACCESS NUMBERS, HAS BEEN

ALTERED OR REMOVED. THIS WARRANTY SHALL ALSO BE VOID IF THE

DEVICE HAS BEEN OPENED BY AN UNAUTHORIZED PERSON (with the exception of opening the battery cover).

This warranty gives you specific legal rights which may vary from state to state. Some states do not allow the exclusion or limitations of incidental or consequential damages, or allow limitations on the duration of an implied warranty, so those limitations may not apply to you.

Accessory Warranty

An accessory is any DISH Network branded equipment, displaying the DISH Network logo, excluding the receiver, Smart Card, cables and hookups, and non-mechanical components. A oneyear warranty becomes effective upon the activation of the DISH system or date of purchase, if bought separately. A proof of purchase is required to verify the purchase date. If an accessory has an expired warranty, no exchange will be issued. You may purchase replacement accessories from DISH Network or your local retailer.

If You Need Help

1. Review this User Guide .

2. See Troubleshooting on page 55.

3. Visit www.dishnetwork.com/chat for 24/7 support.

4. Call the Customer Service Center at

1-800-333-DISH (3474) .

Regulatory Factors

This device complies with Part 15 of FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference,

and

2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications to this device may void your authority to operate this equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by following one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

Reference Table

Write down your remote address, channel numbers/ inputs, TV, VCR, DVD player, and stereo equipment codes as you program them for future reference.

Remote Address

Channel or Input for

Cable Programming

If you enter a “1” as the last number of your code, your remote is in Limited Mode (see page 15 for more details).

TV Code

(Optional)

VCR/DVD Player Code

Auxiliary Equipment Code

(Optional)

To read out your remote codes, see page 14 for instructions.

For all your customer needs, go to www.dishnetwork.com/chat or call the Customer Service center at 1-800-333-DISH (3474)

180532

Hello! I am an AI chatbot specifically trained to assist you with the DVD player VCR User guide. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant is out of keyboard. Please, try again later.

Key features

Easy setup
Control multiple devices
Programmable buttons
DVR functions
SAT Auto-Tune
RECOVER button

Frequently asked questions

The specific steps are outlined in the document, depending on your remote model it will have specific instructions. If your receiver supports System Wizard, follow the instructions for using it to set up your remote. You may also need to use the manual instructions for configuring the 20.1 or 21.1 remote.

The RECOVER button is used to return to watching your satellite programming if you accidentally switch channels or change the input on your TV or DVD player. You must first set up Auto-Tune for your TV and DVD player. RECOVER will try to tune your TV to channel 3, then channel 4, and then other video inputs with each press of the button.

You can program your remote to control other devices such as your TV, DVD player, and even a second DISH Network receiver. You can use codes from the tables in the document to program the remote, or you can teach it specific commands from another remote control. You can also use the remote to control the volume of an amplifier or audio receiver. Read the document for specific instructions and features.