Geryst BE1037 True Wireless Earbuds User Guide

 BE1037
TRUE WIRELESS EARBUDS
Please read this manual carefully before using the product
and keep it in a safe place.
What's in the box?
Wireless Earbuds
Charging Case
Eartips (S,L)
Type-C Cable User Manual
o IL
Product Diagram
LED Indicator / Microphone
MFB button
Charging Pin
Type-C charging port
LED Indicator
(D Charging
e Remove the protective film from the earbuds when using
for the first time.
e Fully charge both earbuds and the charging case before
the first-time using.
e To prevent damage, use the provided USB-C cable.
e Fully dry off the earbuds and the USB port before charging.
IN If the charging case has run out of battery. Charging case
will enter deep-sleep state, it will not light up while charging.
Keep charging for 20 mins till the case light up to activate the
charging case.
(2) LED Behavior
EN EN 3
1%~25%(Power)
25%~50%(Power)
50%~75%(Power)
75%~100%(Power)
e Select "BE1037" from the list of
Each earbud could be used independently
(4\ Pairing your earbuds
e Both of the earbuds will turn on automatically and start pairing
when taking out the earbuds from the charging case.
devices shown
Note:
When the earbuds are powered on, the earbuds
will connect with the device they paired on last
time automatically.
4
6) Function
Power On
OS.
Click and hold R and L for 3 seconds
Power Off
Os.
Pause the music first, Click and hold
R and L for 5 seconds
dé
Play / Pause
Os.
Click (R/L)
Next Track
Os.
Double-Click (R)
Previous Track
Os.
Double-Click (L)
Volume UP/Down
Click and hold the MFB button of Left earbuds to turn
up the volume. Click and hold the MFB button of Right
earbuds to turn down the volume.
C
Answer / hang up
Os.
Click (R/L)
Reject
Os.
Double Click (R / L)
9
Voice-Assistant | Os.
Triple Click (В / L)
(6) Reset and Reconnecting
If the 2 earbuds can't paired sucessfully or you can't connect the
earbuds with your phone, please try to repairing it as the steps
as below:
Step1: Delete the bluetooth connection record on your phone.
Step2: Turn on the 2 earbuds at the same time, and click the
MFB of the earbuds 5 times quickly till they enter pairing mode.
X5
A Specification
Input DC 5V/1A
Version V5.1
Profile A2DP,AVRCP, HFP, HSP
Maximum Working Range 10m(without obstacle)
Earbuds battery life Up to 6 hours(various by volume and audio content)
Earbud Charging Time About 1.5 hours
Earbud Battery Capacity 50mAh
Charging Case Battery Capacity 500mah
About 80 9
6
Product Weight