EFM TWS Pelion Sports Earbuds User Manual

LISTENING TO MUSIC:

Now you have properly paired and connected your earbuds to your phone, the rest is easy. To play music, launch your favourite music player app (eg. Spotify, Apple music etc) and start playing your songs.

1. To pause music, click the button on MFB earphone once.

2. To resume music, press the button on the MFB earphone.

3. Next tracks, Long press the button for 2 seconds on the

R MFB

4. Previous tracks, Long press the button for 2 seconds on the L MFB

CALLS & VOICE COMMANDS:

When earbuds are connected to your phone, you can answer and control the incoming calls.

Answer / End a Call

When a call comes in while you are wearing the earbuds, you will hear a notification sound from your earphone.

1. To answer a call, click the button on the earphone once.

2. To end a call, click the button once again.

3. To transfer a call during call mode, press and hold button for 2 seconds.

Click Action

Single click

Press & Hold

2 seconds

Phone call

Answer or end a call

Transfer call during call mode

VOICE COMMANDS:

Double click the MFB earphone to activate Siri or Google

Assistant. You will hear ‘Voice Dial’ prompt from the earphone.

You can start dictating commands to Siri or Google Assistant.

Click Action

Double click

Phone call

Activate Siri or Google Assistant

TURN EARBUDS OFF AND ON:

There are two ways you can turn the earbuds Off/On:

WITH charging pod and WITHOUT the charging pod.

The easiest way to turn earbuds on/off is with the charging pod.

Turn Earphones Off/On

WITH Charging Pod

To turn off the earbuds, put earbuds back into charging pod.

Turn Earphones Off/On

WITHOUT Charging Pod

You can turn earbuds on/off without using the charging pod.

To turn off earbuds, press and hold the button on both the earbuds for 5 seconds until you hear notification’ from both earbuds Both earbuds will turn off together.

To turn on earbuds, press the button on BOTH earbuds for 5 seconds you will hear ‘notification’ from both earbuds.

The EFM® 2 Year WARRANTY

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

EFM® will happily repair or replace defective goods for up to 2 years from the date of purchase. This warranty is against defects in the EFM® goods purchased and does not cover damage caused by the incorrect use or installation of the goods, or by modifications, or by accident.

To claim under the warranty, you need to return the faulty product to the place of purchase (at your expense) with a valid proof of purchase. If you are not able to return the product to the place of purchase, you can contact:

EFM Customer Service Department

61 Belmont Avenue, Belmont WA 6104

P: 1300 069 336 (1300 0 MYEFM)

E: [email protected]

Important:

The 2 Year Warranty covers EFM® product and not your device. Whilst we stand by our products, EFM® will not be liable to any damages caused to your device from accidental impact. For more information visit myefm.com/warrantysupport myefm.com

T W S P E L I O N t r u e w i r e l e s s s t e r e o H D e a r b u d s u s e r ‘ s m a n u a l

INTRODUCTION:

Thank you for choosing the EFM ® TWS Pelion Wireless HD

Earbuds! You can use this product with all IOS and Android compatible Bluetooth ® devices to stream music and enjoy handsfree calling. In order to get the best results when using these earbuds, please read this manual first.

PACK CONTENTS:

− 1 x EFM® TWS Pelion Eearbuds & Charging Pod

− 1 x 25cm USB Charging Cable

− 1 x User Manual

− 3 x Earbud Tips

(Sizes: Small / Medium / Large)

− 2 x Sports Earbud gels (Sizes: Small / Medium)

− 1 x Sports Ear hook

SPECIFICATIONS:

− Frequency Response: 20Hz - 20KHZ

− Sensitivity: 91±3dB

− Driver: 6mm Dynamic

FEATURES:

− IPX7 Water Proof

− Handsfree function

− 5.5 days standby time / 6 hours music and talk time

− Wireless microphone / multi-function control (10m range)

− Voice commands: Activate Siri or Google Assistant

− SAFETY PRECAUTIONS:

1. Keep this product and its charging cable away from excessive heat.

2. Do not operate this device with a damaged cable or after it has malfunctioned or has been damaged in any manner.

3. Do not disassemble this product.

TECHNICAL SPECIFICATIONS:

General Headset Features

Standard

Bluetooth ® Headset Profile

Bluetooth Specification V5.0

Support

Bluetooth ® Hands Free Profile Support

Bluetooth ® A2DP Profile Support

Bluetooth ® AVRCP Profile

Support TWS

Support

Support

Theoretical range in open field <10m without obstruction

Re-program the firmware

Battery

None

3.7V, 60mAh Lithium polymer Battery (type)

Stand By (Paired mode)

Talk Time

Battery Charging Case

5.5 days

6 hours

500mAh

Charging time < 3.5 hours

OVERVIEW DIAGRAM:

Charging Contact

Charging Pod

Charging Contact

Input Port

Micro USB

LED Indicator

Left Multi-Function

Button (LMFB)

Microphone

HOW TO USE/GENERAL FUNCTIONS:

Desired Result Required Action

Power On Simply remove earphones from the

Charging Pod, if the earbuds are off, press the L/R MFB for 2 seconds to turn back on, the earphone will automatically go into pairing mode.

Power Off

Pairing

Place earphones into the Charging Pod or press and hold for 5 seconds.

1. Activate the Bluetooth ® function on our device and select EFM Pelion.

The earbuds will automatically pair with the device.

2. Press the ‘YES’ soft key on the phone to connect to the headset, pairing is successful.

3. Earphones distance range up to

10 metre and working range is 180 seconds.

Play / Pause

Next Track

Single click the R/L Multi-Function Button.

Long Press R MFB for 2 seconds

Previous Track Long Press L MFB for 2 seconds

Answer / End

Call

Single click MFB when call is incoming.

Transfer Call

Voice

To transfer call during call mode, press & hold Multi-Function button for 2 seconds.

Voice Assistant Double Press the MFB button

Reject

Microphone Call

Press & Hold the Multi-Function button for 2 seconds

General Notes

• For Voice dial, your mobile phone must support this function.

(check the mobile phone manual)

Make sure all Bluetooth fucntions is off, turn off earbuds and press the MFB on both earbuds for 10 seconds, white & red

LED will flash, once the resset is success a white & red LED will repeated flash 5x.

CHARGING YOUR EARBUDS AND

CHARGING POD:

Fully charge the battery for 3-4 hours before using the earbuds for the first time, or when they have been unused for extended periods. The charging pod has a built-in Power

Bank and is charged along with the earbuds. You can charge the earbuds by placing them into the charging pod without connecting to a power outlet.

1. Place the earbuds into the charging pod, the LED indicator on each earbud will be on when charging and turn off when fully charged

2. Connect one side of the supplied cable to the charging port of charging case and connect the other side to any

USB power source. The Charging Pod will indicate its charging status by a flashing white light.

3. When the device is fully charged, the LED will stop flashing.

Earphones

Charging Pod

CHARGING STATUS

LED will be disappears when fully charged

White LED light when fully charged

WEARING YOUR EARBUDS:

The earbuds come with comfortable silicone buds for your everyday use. Try all the different size earbuds that are provided in the package to find the best fit for your ears. You can get the best audio quality when the earbuds seal your ear canal.

NOTE: Your left and right ears may need different size earbuds.

Insert the earbuds with the earbuds directed towards your ear canal. Twist gently until they fit comfortably and fell secure in your ears.

CONNECTING EARBUDS TO YOUR PHONE:

1. Take earphone from the charging pod to enter pairing mode.

2. Turn on Bluetooth ® on your phone and select EFM Pelion to pair with this earphone.

3. When the earphones are not on the charging box, and earphones are power off. Press the MFB (multi-function button) on both earphones for 2 seconds to turn on the earphones. The earphones will automatically enter pairing mode

4. After this earphone is successfully paired with your phone,

TWS can remember up to three Bluetooth devices. You just need to repeat the above steps to pair with another

Bluetooth device. The earbuds will only automatically connect with the last paired Bluetooth device.

AUTOMATIC CONNECTION:

Now you have properly set up your earbuds, they will connect to your phone automatically from now on.

Auto Connect

Earphones are automatically connected to your phone when you pull them out of the charging pod.

Auto Off

Earphones are turned off automatically when you put them into the charging pod.