AIROHA T1 Pods True Wireless Earbuds User Guide

User Guide

V5.0 True Wireless Earbuds

Model: T1 Pods

Introduction:

1 . Silicon Rubber Loops / Ear Hooks Stabilizer

Mic Loop LED Indicator capacity it remains just press the power button and the LED lights on it will show you.

Note: The earbuds originally come with loops, you can change them into ear hooks for intense activities.

2. Ear tips

L

3. Earbuds

Main Button

M S

Left Side Right Side

4. Charging case

Led Indicator

01

Power Button

Button

Note: when the charging box is asleep, to know how much battery

02

5. Perfect Fit

Micro usb charging port

Twist in the ear canal forward or back to lock in for your best fit, you will enjoy great sounding music.

03

First Time Use

1. Press button to open box

Button

2. Take earbuds out and peel the film from the bottom of earbuds and then put them back into case.

3. Take earbuds out and wait for them to pair with each other. After successful pairing, one earphone will flash GREEN and RED quickly.

4. Turn on Bluetooth function on the phone, scan and search for " T1 Pods ", click to connect.

Automatic re-connection to your phone

(Bluetooth function must be active on phone)

After first successful pairing between your device and the earbuds, the next time you take any earphone or both out, it/they will automatically on and connect back to your device (battery volume of charging box should be active).

IMPORTANT: Remember to remove protective film from the bottom of earbuds. Earbuds will not be able to charge if this film is not removed.

Peel the film

04 05

Functions of Main Button:

Main Button Left Side Right Side Mic

Music play/pause: Short press the button of L or R earphone once when music is playing

Previous song: Quick press the MFB button of earphone L twice

Next song: Quick press the MFB button of earphone R twice

Volume up: Long press R side when music is playing

Volume down: Long press L side when music is playing

Reject call: Long press the button of L or R earphone for 3 seconds

Answer call: Short press button L or R earphone once

End call: Short press the button L or R earphone once

Redial last outgoing number: Quick press the button of L or

R earphone twice when music app is not playing

Activate iPhone Siri or Android Voice Assistant: Quick press the button of L or R earphone 3 times

06

Battery low reminding: when the battery is running low, you will hear voice prompt “low battery, please charge” and the indicator light flashes red fast.

Power on

When both earbuds are power off, long press each earbud for 3 seconds to power them on with voice prompt "power on". OR take them out from charging case, they will power on automatically.

Power Off

When music/audio pauses, long press R earbud for 5 seconds to power it off with voice prompt "power off" and do same for L side.

OR put them into charging case, both earbuds will power off.

Charging the earbuds

Put both earbuds into the charging base. The indicator light will be solid RED while charging and off after fully charged.

Note: when charging the earbuds, we need to put the earbuds at the right position inside the charging case. Press and move the earbuds if necessary until red light is on.

07

Contact Pin for Charging

Change Mono Mode into Stereo Mode

Take one earphone from charging box, pair it with your phone, it’s in mono mode now.

Take out another one, it will power on automatically and connect with previous one. Now it’s in stereo mode. Simple and easy!

Re-charging the charging case

When the charging case is low in voltage, please recharge. To

08 do this, simply insert the supplied micro USB cable into the micro USB port on the back of the case, and connect the other end into a USB main power source. Allow a couple of hours for the case to recharge. The LED indicators will flash WHITE while charging and will turn into solid WHITE after fully charged.

Re-pair 2 earbuds

If 2 earbuds fail to pair with each other and they both flash green and red, quick press both earbuds 2 times, they will connect with each other and one is flashing green and red.

Now you can search “T1 Pods” on your phone and click to connect.

09

Specifications:

Bluetooth version: 5.0 + EDR

Supported Profiles: HSP, HFP, A2DP, AVRCP

Frequency Response: 2.4-2.480GHz

Operation Distance: 10m obstacle-free

Talk Time: 6.0 hours

Music Time: 5.5 hours

Charing Time: 1.0 hours

Standby Time: 100 hours

Earbuds capacity: 50mAh for each earbud

Charging box capacity: 500mAh (charge the 2 earbuds for 3 times)

Weight and Size for Earbuds: 5g x 2, 24*16*25mm

Weight and Size for Charging box: 39g, 75*41*30mm

Features:

1. Dual channels (2 earphones can work independently, put one into charging box, the other one still working)

2. Automatic power on and pairing with phone after taking out from charging box

3. Volume up/down control, next/previous song control

10

4. Receive call, end call, reject call, redial

5. Activate Siri or Voice assistant

6. Ergonomic in-ear design for secure and comfortable fit

7. Nice sound with bass

Safety Instructions:

1. To avoid hearing damage, make sure that the volume on music player is turned down before connecting your earbuds.

After placing earbuds in your ears, gradually turn up the volume until you reach a comfortable listening level.

2. Avoid storage in high temperatures, such as in a hot vehicle or in direct sunlight.

3. Do not expose the earbuds or any of its supplied parts to rain or other liquids.

4. Do not drop or cause undue impact to the earbuds.

5. Do not use any dilutant or volatile liquid to clean the product.

6. Do not use headphones when it’s unsafe to do so—while operating a vehicle, crossing streets, or during any activity or in an environment where your full attention to your surroundings is required.

7. Do not store other items in the case, as this may result in contamination.

11