RYOBI RLT26CDS 26cc Petrol Line Trimmer User`s manual
Ryobi RLT26CDS is a powerful and versatile tool that can help you tackle various tasks in your garden. With its 26cc engine and 17-inch cutting swath, it can easily cut through thick grass and weeds. The bump-feed trimmer head makes it easy to advance the line, and the adjustable handle and shaft allow you to customize the trimmer to your height and comfort level. The trimmer also features a guard to protect plants and flowers from accidental damage, making it an ideal choice for precision trimming around flower beds and other delicate areas.
विज्ञापन
विज्ञापन
RLT26CDS
SV
DA
NO
FI
HU
CS
RU
FR
EN
DE
ES
IT
PT
NL
ET
LT
LV
SK
BG
RO
PL
SL
HR
COUPE-BORDURES
STRING TRIMMER
KANTENSCHNEIDER
RECORTADORA DE HILO
TAGLIABORDI
APARADOR DE RELVA
GRASTRIMMER
MANUEL D’UTILISATION 1
USER’S MANUAL 10
BEDIENUNGSANLEITUNG 18
MANUAL DE UTILIZACIÓN
MANUALE D’USO
27
36
MANUAL DE UTILIZAÇÃO 45
GEBRUIKERSHANDLEIDING 54
TRIMMER
TRÅDTRIMMER
TRÅDTRIMMER
SIIMALEIKKURI
INSTRUKTIONSBOK 63
BRUGERVEJLEDNING 71
BRUKSANVISNING 79
KÄYTTÄJÄN KÄSIKIRJA 87
SZEGÉLYVÁGÓ HASZNÁLATI ÚTMUTATÓ 95
STRUNOVÁ SEKAČKA NÁVOD K OBSLUZE 104
ÅÖçáéäéëÄ êìäéÇéÑëíÇé èé ùäëèãìÄíÄñàà
TRIMMER MANUAL DE UTILIZARE
112
121
PODKASZARKA DO OBRZEŻY INSTRUKCJA OBSŁUGI 130
KOSILNICA Z NITKO
©I©A»
UPORABNIŠKI PRIROČNIK
KORISNI»KI PRIRU»NIK
139
148
ŽOLIAPJOVĖ
ROKAS PĻAUJMAŠĪNA
STRUNOVÁ KOSAČKA - VYŽÍNAČ
íêàåÖê
NAUDOJIMO VADOVAS
LIETOTĀJA ROKASGRĀMATA
NÁVOD NA POUŽITIE
êöäéÇéÑëíÇé áÄ ìèéíêÖÅÄ
166
175
184
193
Important!
It is essential that you read the instructions in this manual before mounting and operating this machine.
960401009-03.indd AI 2010/4/28 4:56
Attention !
Important!
Achtung!
¡Atención!
Attenzione!
Atenção!
Let op !
Observera!
OBS!
Advarsel!
Huomio!
Figyelem!
!
Atenie!
Uwaga!
Důležité upozornění!
ÇÌËχÌËe!
Pomembno!
Upozorenje!
Dikkat!
Tähtis!
Dėmesio!
Uzmanību!
Upzornenie!
ÇÌËχÌËÂ!
Il est indispensable que vous lisiez les instructions contenues dans ce manuel avant le montage et la mise en service de l’appareil.
It is essential that you read the instructions in this manual before mounting and operating this machine.
Bitte lesen Sie unbedingt vor Montage und Inbetriebnahme die Hinweise dieser Bedienungsanleitung.
Es imprescindible que lea las instrucciones de este manual antes del montaje y de la puesta en servicio.
Prima di procedere al montaggio e alla messa in funzione, è indispensabile leggere attentamente le istruzioni del presente manuale.
É indispensável ler as instruções deste manual antes de montar e pôr em serviço.
Het is absoluut noodzakelijk vóór montage en inbedrijfstelling de aanwijzingen in deze handleiding te lezen.
Det är nödvändigt att läsa instruktionerna i denna bruksanvisning före montering och driftsättning.
Denne brugsanvisning skal læses igennem inden montering og ibrugtagning.
Vennligst les instruksjonene i denne bruksanvisningen før du monterer og tar i bruk maskinen.
On ehdottoman välttämätöntä lukea tässä käyttöohjeessa annetut ohjeet ennen asennusta ja käyttöönottoa.
Feltétlenül fontos, hogy a jelen használati útmutatóban foglalt előírásokat az
összeszerelés és az üzembe helyezés ellőt elolvassa!
Před montáží nářadí a uvedením do provozu je nutné si přečíst následující pokyny.
èee‰ Ò·ÓÍÓÈ Ë Á‡ÔÛÒÍÓÏ ËÌÒÚÛÏeÌÚ‡ ÌeÓ·ıÓ‰ËÏÓ ÔÓ˜eÒÚ¸ ËÌÒÚÛ͈ËË ËÁ ̇ÒÚÓfl˘e„Ó
ÛÍÓ‚Ó‰ÒÚ‚‡.
Este indispensabil sã citii instruciunile coninute în acest mod de utilizare înainte de montaj i de punerea în funciune.
Przed montowaniem i uruchomieniem, koniecznie musicie się Państwo zapoznać z zaleceniami zawartymi w niniejszym sposobie użycia.
Zelo pomembno je, da pred namestitvijo in prvo uporabo te naprave preberete navodila v tem priročniku.
Vaæno je da upute u ovom KorisniËkom priruËniku proËitate prije postavljanja i uporabe ovog alata.
Montajdan ve aletin kullanımına başlamadan bu kılavuzda bulunan talimatları okumanız gerekmektedir.
Lugege enne seadme kokkupanekut ja kasutamist kindlasti läbi selles juhendis sisalduvad eeskirjad ja juhised!
Prieš surinkdami ir paleisdami aparatą į darbą, reikia, kad jūs perskaitytumėte šiame vadove esančias instrukcijas.
Ir ļoti būtiski, lai jūs izlasītu norādījumus, kas sniegti šajā rokasgrāmatā, pirms ķeraties pie ierīces montēšanas un iedarbināšanas!
Je dôležité, aby ste si pred montážou a spustením zariadenia prečítali pokyny, ktoré sa nachádzajú v tomto návode.
èÂ‰Ë Ò„ÎÓ·fl‚‡ÌÂ Ë ÔÛÒ͇Ì ̇ χ¯Ë̇ڇ  ‚‡ÊÌÓ ‰‡ ÔÓ˜ÂÚÂÚ ËÌÒÚÛ͈ËËÚ ‚
˙ÍÓ‚Ó‰ÒÚ‚ÓÚÓ Á‡ ÛÔÓÚ·‡.
960401009-03.indd AII 2010/4/28 4:56
FR EN DE ES IT PT NL SV DA NO FI HU CS RU RO PL SL HR ET LT LV SK BG
English(Original instructions)
SYMBOLS
Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and safer.
NAME EXPLANATION
Safety Alert Symbol Indicates danger, warning or caution. It means attention!!! Your safety is involved.
Read Your Operator's
Manual
Wear eye, hearing and head protection
Keep bystanders away
Your manual contains special messages to bring attention to potential safety concerns as well as operating and servicing information. Please read all the information carefully to ensure satisfaction and safe use.
Wear eye, hearing and head protection when operating this equipment.
Keep all bystanders at least 15 m away.
Ricochet
No blade
RPM Decal
Boots
Gloves
No Smoking
Danger of Ricochet.
Do not install any type of blade on this unit.
Rotational direction and maximum speed of the shaft for the cutting attachment.
Wear non-slip safety footwear when using this equipment.
Wear non-slip, heavy-duty gloves.
Do not smoke when mixing fuel or filling fuel tank.
Petrol
Oil
Mix Petrol and Oil
Use unleaded gasoline intended for motor vehicle use with an octane rating of 91 ([R+M]/2) or higher.
Use synthetic 2-stroke oil for air cooled engines.
Mix the fuel mix thoroughly and also each time before refuelling.
960401009-03.indd 10 2010/4/28 4:56
FR EN DE ES IT PT NL SV DA NO FI HU CS RU RO PL SL HR ET LT LV SK BG
English(Original instructions)
SYMBOLS
NAME EXPLANATION
Switch On/Off Switch
I = ON to Run
O = OFF to Stop
Conforms to all regulatory standards in the country in the EU where the product is purchased.
Thank you for buying a Ryobi trimmer.
Your new trimmer has been engineered and manufactured to Ryobi’s high standard for dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
INTENDED USE
This product should only be used outdoors.
The product is intended for cutting long grass, weed, and similar vegetation at or about ground level. The cutting plane should be approximately parallel to the ground surface. The product should not be used to cut or trim hedges, bushes or other vegetation where the cutting plane is not parallel to the ground surface.
WARNING
To reduce the risk of injury, the user must read and understand the operator’s manual.
WARNING
Do not attempt to operate this trimmer until you have read thoroughly and understood completely all instructions, safety rules etc contained in this manual. Failure to comply may result in accidents involving fire, electric shock or serious personal injury. Save operator’s manual and review frequently for continuing safe operation, and instructing others who may use this tool.
READ ALL INSTRUCTIONS.
GENERAL SAFETY RULES
Q
Q
Q
Q
For safe operation, read and understand all instructions before using the trimmer. Follow all safety instructions. Failure to follow all safety instructions listed below, can result in serious personal injury.
Do not allow children or untrained individuals to use this unit.
Never start or run the engine in a closed or poorly ventilated area; breathing exhaust fumes can kill.
Clear the work area before each use. Remove all objects such as rocks, broken glass, nails, wire, or string which can be thrown or become entangled in the bump head.
Q
Q
Q
Q
Q
Q
Q
Q
Wear full eye and hearing protection while operating this unit.
Wear heavy long pants, boots, and gloves. Do not wear loose fitting clothing, short pants, jewellery of any kind, or use with bare feet.
Secure long hair so it is above shoulder level to prevent entanglement in any moving parts.
Keep all bystanders, children, and pets at least 15 m away.
Do not operate this unit when you are tired, ill, or under the influence of alcohol, drugs, or medication.
Do not operate in poor lighting.
Keep firm footing and balance. Do not overreach.
Overreaching can result in loss of balance or exposure to hot surfaces.
Keep all parts of your body away from any moving part.
Q
Q
Q
Q
Do not touch area around the muffler or cylinder of the trimmer, these parts get hot from operation.
Always stop the engine and remove the spark plug wire before making any adjustments or repairs except for carburetor adjustments.
Inspect the unit before each use for loose fasteners, fuel leaks, etc. Replace any damaged parts before use.
The string head will rotate during carburetor adjustments.
Q It has been reported that vibrations from hand-held tools may contribute to a condition called Raynaud’s
Syndrome in certain individuals. Symptoms may include tingling, numbness and blanching of the fingers, usually apparent upon exposure to cold.
Q
Q
Hereditary factors, exposure to cold and dampness, diet, smoking and work practices are all thought to contribute to the development of these symptoms.
It is presently unknown what, if any, vibrations or extent of exposure may contribute to the condition. There are measures that can be taken by the operator to possibly reduce the effects of vibration: a) Keep your body warm in cold weather. When operating the unit wear gloves to keep the hands and wrists warm. It is reported that cold weather is a major factor contributing to Raynaud’s Syndrome.
b) After each period of operation, exercise to increase blood circulation.
960401009-03.indd 11 2010/4/28 4:56
FR EN DE ES IT PT NL SV DA NO FI HU CS RU RO PL SL HR ET LT LV SK BG
English(Original instructions) c) Take frequent work breaks. Limit the amount of exposure per day.
Q If you experience any of the symptoms of this condition, immediately discontinue use and see your physician about these symptoms.
Q
Q
Q
Q
Q
Keep the tool well maintained, fasteners tightened and worn parts replaced.
Mix and store fuel in a container approved for fuel.
Mix fuel outdoors where there are no sparks or flames.
Wipe up any fuel spillage. Move 9 m away from refueling site before starting engine.
Stop the engine and allow to cool before refueling or storing the unit.
Allow the engine to cool; empty the fuel tank and secure the unit from moving before transporting in a vehicle.
SPECIFIC SAFETY RULES FOR TRIMMER USE
Q
Q
Q
Q
Q
Replace bump head if cracked, chipped, or damaged in anyway. Be sure the bump head is properly installed and securely fastened. Failure to do so can cause serious injury.
Make sure all guards, straps, deflectors and handles are properly and securely attached.
Use only the manufacturer's replacement line in the cutting head. Do not use any other cutting attachment.
Never operate unit without the safety guard in place and in good condition.
Maintain a firm grip on both handles while trimming.
Keep bump head below waist level. Never cut with the bump head located over 76 cm or more above the ground.
SPECIFICATION
Weight
- Without fuel, without string head, without guard
- Without fuel with string head
Fuel tank volume
Cutting swath
Engine displacement
Line diameter
Maximum engine performance
(in accordance with ISO 8893)
(kg)
[cm 3 or (L)]
(mm)
(cm 3 / cc)
(mm)
(kW)
Maximum rotational frequency of the the spindle
Engine speed (rotational frequency) at recommended max. spindle rotational frequency
Engine speed (rotational frequency) at idle
Fuel consumption (in accordance with ISO 8893) at max.
(min-
(min-
(min-
1
1
1
)
)
) engine performance
Specific fuel consumption
(in accordance with ISO 8893) at max. engine performance
Vibration level idling
- Front handle
- Rear handle
Vibration level racing
- Front handle
- Rear handle
Sound pressure level
(in accordance with EN ISO 22868)
Measured sound pressure level
Sound power level (in accordance with EN ISO 22868)
[kg/h or (L/h)]
[g/kW.h or (L/kW.h)]
(m/s 2
(m/s 2 )
)
[LpA (dB A)]
(dB A)
[LwA (dB A)]
RLT26CDS
3.98
4.35
250 or ( 0.25
)
432
26
2.0
0.65
12,000
12,000
2,800-3,800
0.33 or (0.45)
508 or (0.7)
7.7
4.5
11.1
12.9
100
108
109
960401009-03.indd 12 2010/4/28 4:56
FR EN DE ES IT PT NL SV DA NO FI HU CS RU RO PL SL HR ET LT LV SK BG
English(Original instructions)
DESCRIPTION
Wear eye protection and ear protection.
Please refer to Fig.1
1. Primer Bulb
2. Choke Lever
3. Fuel Cap
4. Starter Grip
5. On / Off Switch
6. Throttle Trigger
7. Rear Handle
8. Front Handle
9. Shaft
10. Safety Guard
11. Bump Head
12. Cutting Line
13. Knob
14. Throttle Lock
15. Idle Speed Screw
Keep all bystanders, especially children and pets, at least 15 m from the operating area.
FUEL AND REFUELING
Q
Q
Q
Q
HANDLING THE FUEL SAFELY
Q
Always handle fuel with care, it is highly flammable.
Always refuel outdoors where there are no sparks and flames. Do not inhale fuel vapors.
Do not let petrol or oil come in contact with your skin.
Keep petrol and oil away from the eyes. If petrol or oil comes in contact with the eyes, wash them immediately with clean water. If irritation is still present, see a doctor immediately.
Clean up spilled petrol immediately.
ASSEMBLY
Please refer to Fig. 2.
WARNING
If any parts are damaged or missing, do not operate this tool until the parts are replaced.
Failure to heed this warning could result in serious personal injury.
WARNING
Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
WARNING
To prevent accidental starting that could cause serious personal injury, always disconnect the engine spark plug wire from the spark plug when assembling parts.
WARNING
Never attach or adjust any attachment while power head is running. Failure to stop the engine may cause serious personal injury.
MIXING THE FUEL
(Fig. 3)
Q
Q
Q
Q
Q
Q
Q
This product is powered by a 2-stroke engine and requires pre-mixing petrol and 2-stroke oil. Pre-mix unleaded petrol and 2-stroke engine oil in a clean container approved for petrol.
This engine is certified to operate on unleaded petrol intended for automotive use with an octane rating of 91 ([R + M] / 2) or higher.
Do not use any type of pre-mixed petrol / oil from fuel service stations, this includes the pre-mixed petrol / oil intended for use in mopeds, motorcycles, etc.
Use synthetic 2-stroke oil only. Do not use automotive oil or 2-stroke outboard oil.
Mix 2% synthetic 2-stroke oil into the petrol. This is a
50:1 ratio.
Mix the fuel thoroughly and also each time before fueling.
Mix in small quantities. Do not mix quantities larger than usable in a 30 day period. Synthetic 2-stroke oil containing a fuel stabilizer is recommended.
WARNING
Be certain the knob is fully tightened before operating equipment; check it periodically for tightness during use to avoid serious injury.
OPERATION
Read the operation manual and follow all warnings and safety instructions.
FILLING THE TANK
Q
Q
Q
C l e a n s u r fa c e a r o u n d f u e l c a p t o p r eve n t contamination.
Loosen fuel cap slowly to release pressure and to keep fuel from escaping around the cap.
Carefully pour fuel mixture into the tank. Avoid spillage.
960401009-03.indd 13 2010/4/28 4:56
FR EN DE ES IT PT NL SV DA NO FI HU CS RU RO PL SL HR ET LT LV SK BG
English(Original instructions)
Q Prior to replacing the fuel cap, clean and inspect the gasket.
Q Immediately replace fuel cap and hand tighten.
Wipe up any fuel spillage. Move 9 m away from refueling site before starting engine.
Note: It is normal for smoke to be emitted from a new engine during and after first use.
WARNING
Always shut off engine before fueling. Never add fuel to a machine with a running or hot engine.
Move at least 9 m from refueling site before starting engine. Do not smoke!
1 Litre + 20 ml =
2 Litres + 40 ml =
3 Litres + 60 ml =
4 Litres + 80 ml =
5 Litres + 100 ml =
50:1 (2%)
OPERATING THE TRIMMER (Fig. 5)
Hold the trimmer with the right hand on the rear handle and the left hand on the front handle. Keep a firm grip with both hands while in operation. Trimmer should be held at a comfortable position with the rear handle about hip height.
Always operate trimmer at full throttle.
Cut tall grass from the top down. This will prevent grass from wrapping around the shaft housing and bump head which may cause damage from overheating. If grass becomes wrapped around the bump head, stop the engine, disconnect the spark plug wire, and remove the grass. Prolonged cutting at partial throttle will result in oil dripping from the silencer.
CUTTING TIPS (Fig. 6)
When cutting make sure the cutter head is at a slight angle as shown while still approximately parallel to the ground surface. In tall grass cut from the top down to ensure the moving parts do not get tangled with the long grass.
Move the head in steady strokes from right to left as you work through the grass.
STARTING AND STOPPING (Fig. 4)
WARNING
Never start or run the engine inside a closed or poorly ventilated area; breathing exhaust fumes can kill.
NOTE: Be sure to return the stop switch to the "I" (RUN) position before trying to start unit.
To start a cold engine:
DO NOT squeeze the throttle trigger until the engine starts and runs.
Lay the trimmer on a flat, bare surface.
PRIME - Press the primer bulb 10 times.
SET the start lever to the START position.
PULL the rope quickly and sharply straight up until the engine starts.
Then squeeze the trigger to run.
NOTE: Squeezing and releasing the throttle trigger releases the start lever to the RUN position.
If the engine stalls, set the start lever to the RUN position
" ". Then pull starter rope until the unit starts.
To start a warm engine:
Make sure carburettor is set to RUN position .
PULL the rope quickly and sharply straight up until the engine starts.
To stop the engine:
Press and hold the switch in the stop the engine stops.
“ O ” position until
ADVANCING THE LINE (Fig. 7)
If the line becomes short, tap the head on the ground as shown to extend more line. Take care not to ‘crash’ it against a hard surface.
MAINTENANCE
WARNING
Use only original manufacturer's replacement parts, accessories and attachments. Failure to do so can cause possible injury, poor performance and may void your warranty.
You may make adjustments and repairs described here. For other repairs, have the trimmer serviced by an authorised service agent.
Consequences of improper maintenance may include excess carbon deposits resulting in loss of performance and discharge of black oily residue dripping from the silencer.
Make sure all guards, straps, deflectors and handles are properly and securely attached to avoid the risk of personal injury.
the cutting attachment must not rotate in idle mode. If this requirement is not satisfied, the idle speed needs adjustment (Fig.10) or the machine needs an urgent maintenance by a qualified technician.
960401009-03.indd 14 2010/4/28 4:56
FR EN DE ES IT PT NL SV DA NO FI HU CS RU RO PL SL HR ET LT LV SK BG
English(Original instructions)
SPOOL REPLACEMENT (Fig. 11)
LINE REPLACEMENT (Fig. 11)
Ensure the unit is in the off position
Remove the spark plug lead, to prevent accidental starting.
Use 2.4mm diameter monofilament string.
Cut one piece of string approximately 6.0m in length
Rotate knob on string head until line on knob aligns with arrows on top of string head.
Insert one end of string into eyelet located on the side of the string head and push until string comes out through eyelet on the other side. Continue to push string through the string head until the middle section of the string is inside the string head and string outside the string head is evenly divided on each side.
Rotate the knob on the string head counterclockwise to wind the string
Wind the string until approximately 20cm remains protruding from the string head.
SPARK ARRESTOR
The spark arrestor must be cleaned or replaced every
25 hours or yearly to ensure proper performance of your product. Spark arrestors may be in different locations depending on the model purchased. Please contact your nearest service dealer for the location of the spark arrestor for your model.
FUEL CAP
WARNING
A leaking fuel cap is a fire hazard and must be replaced immediately.
The fuel cap contains a non-service able filter and a check valve. A clogged fuel filter will cause poor engine performance. If performance improves when the fuel cap is loosened, check valve may be faulty or filter clogged.
Replace fuel cap if required.
SPARK PLUG REPLACEMENT (Fig. 9)
This engine uses a Champion RCJ-6Y or NGK BPMR7A spark plug with .05 in. electrode gap. Use an exact replacement and replace annually.
C L E A N I N G T H E E X H A U S T P O R T A N D
SILENCER
Depending on the type of fuel used, the type and amount of oil used, and/or your operating conditions, the exhaust port and silencer may become blocked with carbon deposits. If you notice a power loss with your petrol powered tool, a qualified service technician will need to remove these deposits to restore performance.
IDLE SPEED ADJUSTMENT (Fig. 10)
If the cutting attachment turns at idle, the idle speed screw needs adjusting on the engine. Turn the idle speed screw counterclockwise to reduce the idle RPM and stop the cutting attachment movement. If the cutting attachment still moves at idle speed, contact a service dealer for adjustment and discontinue use until the repair is made.
STORING THE PRODUCT
Clean all foreign material from the product. Store idle unit indoors in a dry, well-ventilated area that is in- accessible to children. Keep away from corrosive agents such as garden chemicals.
Abide by all ISO and local regulations for the safe storage and handling of petrol.
When storing 1 month or longer:
Drain all fuel from tank into a container approved for petrol. Run engine until it stops.
CLEANING THE AIR FILTER SCREEN (Fig. 8)
For proper performance and long life, keep air filter screen clean.
Remove the air filter cover by pushing down on the latch with your thumb while gently pulling on the cover.
Brush the air filter screen lightly to clean.
Replace the air filter cover by inserting the tabs on the bottom of the cover into the slots on the air filter base; push the cover up until it latches securely in place.
960401009-03.indd 15 2010/4/28 4:56
FR EN DE ES IT PT NL SV DA NO FI HU CS RU RO PL SL HR ET LT LV SK BG
English(Original instructions)
TROUBLESHOOTING
IF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM, CONTACT YOUR AUTHORISED SERVICE DEALER.
PROBLEM POSSIBLE CAUSE SOLUTION
Engine will not start.
1. Power switch is off.
2. No spark.
3. No fuel.
4. Engine is flooded.
5. Starter rope now harder to pull than when new.
Engine starts but will not idle long enough to engage throttle
Temperature can effect engine idle time and rpm.
1. Make sure Switch is in the ON or "I" position
2. The spark plug may be damaged, remove it and check for dirt and cracks. Replace with a new spark plug.
3. Push primer bulb until bulb is full of fuel. If bulb does not fill, primary fuel delivery sys tem is blocked.
Con tact a servicing dealer. If prim er bulb fills, engine may be flooded, proceed to next item.
4. Remove spark plug, turn unit so spark plug hole is aimed at the ground. Set start lever to “ ” position and pull starter cord 10 to 15 times. This will clear excess fuel from en gine. Remove any fuel which splashed on the product. Clean and reinstall spark plug. Clean up any spilled fuel and move at least
9m away before restarting. Pull starter three times with with start lever at “ ”. If en gine does not start, set start lever to “ ” position and repeat normal starting pro ce dure. If engine still fails to start, repeat pro ce dure with a new spark plug.
5. Contact a servicing dealer.
Flip start lever to RUN “ until engine starts.
” position and pull starter
Engine does not stop when switch is turned off
Engine starts but will not ac cel er ate.
Electrical connection is loose/ unplugged
Engine requires approximately three minutes to warm up.
Set the start lever to CHOKE “ ” to stop the engine.
Immediately stop using the product. Check electrical connection on the bottom of the trimmer and make sure it is properly connected. Contact servicing dealer if the problem persists.
Allow engine to completely warm up. If engine does not accelerate after three minutes, contact a ser vic ing dealer.
Engine starts but will only run at high speed at half choke.
Carburetor requires adjustment.
Contact a ser vic ing dealer.
Engine does not reach full speed and emits ex ces sive smoke.
Engine starts, runs, and accelerates but will not idle.
1. Check oil fuel mixture.
2. Air filter is dirty.
3. Spark arrestor screen is dirty.
1. Use fresh fuel and the correct 2-stroke oil mix.
2. Clean air filter. Refer to Clean ing the Air Filter
Screen earlier in this manual.
3. Contact a servicing dealer.
Idle speed screw on carburetor requires adjustment
Turn idle speed screw clockwise to increase idle speed.
(Fig.10) Ensure that after adjustment the cutting head does not rotate at idle. Contact servicing dealer if the problem persists.
960401009-03.indd 16 2010/4/28 4:56
FR EN DE ES IT PT NL SV DA NO FI HU CS RU RO PL SL HR ET LT LV SK BG
English(Original instructions)
Line will not advance.
1. Line welded to itself.
2. Not enough line on spool.
3. Line worn too short.
4. Line tangled on spool.
5. Engine speed too slow.
1. Lubricate with silicone spray.
2. Install more line. Refer to “Line Replacement” earlier in this manual.
3. Pull lines while alternately pressing down on and releasing bump head.
4. Remove line from spool and rewind. Refer to “Line
Replacement” earlier in this manual.
5. Advance line at full throttle.
G r a s s w r a p s r o u n d shaft h o u s i n g a n d b u m p head.
1. Cutting tall grass at ground level.
2. Operating trimmer at part throttle.
1. Cut tall grass from the top down.
2. Operate trimmer at full throttle.
Bump knob hard to turn.
S c r e w s t h r e a d s d i r t y o r damaged.
Clean threads and lubricate with grease - if no improvement, replace bump knob.
Oil drips from silencer.
1. Operating trimmer at part throttle.
2. Check oil/fuel mixture.
3. Air filter dirty.
1. Operate trimmer at full throttle.
2. Use fresh fuel and the correct synthetic 2-stroke oil mix.
3. Clean per instruction in Maintenance Section.
NOTE: If your unit exhibits speci c performance problem(s) where the Troubleshooting section recommends a clockwise screw adjustment on the carburetor and no adjustments have been made since original purchase, the unit should be taken to an authorised service centre for repair. In most cases, the needed adjustment is a simple task for the trained service representative.
960401009-03.indd 17
17
2010/4/28 4:56
डाउनलोड
सार्वजनिक लिंक अपडेट किया गया
आपकी चैट का सार्वजनिक लिंक अपडेट कर दिया गया है. You may view and manage your chat links after registration here.
दस्तावेज़ सार्वजनिक लिंक
विज्ञापन
