Model: CAM/DOOR/WIFI
LECLVIC
Thank you for your purchase. Questions, comments
or feedback? We’d love to hear from you.
Visit feit.com/help for support.
SMART VIDEO DOORBELL
IMPORTANT SAFETY INSTRUCTIONS
AND INSTALLATION GUIDE
Works with
Feit Electric app
AS
Only supports
2.4GHz Wi-Fi
Networks
==
READ BEFORE INSTALLATION.
SAVE THESE INSTRUCTIONS.
Questions, problems, missing parts? Before returning to the store,
contact Feit Electric Customer Service
8 a.m. - 5 p.m., PST, Monday - Friday
FEIT.COM
REVO19
We appreciate the trust and confidence you have placed in Feit Electric through the purchase of this product. We strive to
continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your
home improvement needs. Thank you for choosing Feit Electric.
Table of Contents
Safety Information..................,.,.,.,.,... 2 Mounting& Installation = 5
FCC Statement ..................,,.........,.... 2 Power Kit Installation = = 6-7
Warranty. ..................4 ss os 2 APPSetup...........,..,,.,,..,, sus 7
Pre-Assembly.................................. 3 Need Help? ......,..,....,,.,.,,.,..,.,,.,.,,.,. 7
Description ..................,.,..,......,..... 4 Troubleshooting: ee 8
Safety Information PLEASE READ BEFORE INSTALLING!
IMPORTANT SAFEGUARDS:
ALWAYS FOLLOW BASIC SAFETY PRECAUTIONS WHEN USING ELECTRICAL PRODUCTS, ESPECIALLY WHEN CHILDREN ARE PRESENT.
CAUTION: Your transformer should match the normal operation voltage. Do not use DC power supplies with
wired chimes. Not all chimes are compatible with the Smart Doorbell.
Mechanical Chime — For 12-24VAC normal operation, install the Power Kit to give consistent power to your
Smart Doorbell. Choose “Mechanical Chime” setting in the app after pairing the device to function properly. Check your
Brei the Power Kit is buzzing or hot to touch. Your wiring may be wrong. Consult a professional electrician for
urther assistance.
Digital Chime — For 12-24VAC normal operation, DO NOT install the Power Kit. Choose “None” setting in the app after
pairing the device to function properly.
Intercom System — Incompatible with the Smart Doorbell.
A CAUTION: Requires a transformer (not A CAUTION: Intended for outdoor use. May be
included): 12-24VAC 60Hz. This product is
not user-serviceable. Do not attempt to used indoors.
open the product enclosure for any reason.
Before installing your smart video doorbell, CAUTION: If you are unfamiliar or inexperienced with
thoroughly review enclosed installation guide. If your home’s electrical systems, contact a certified
you do not have sufficient electrical wiring electrician for assistance.
experience, please refer to a do-it-yourself
wiring handbook or have your smart video | WARNING: This product may represent а possible
doorbell installed by a qualified licensed shock or fire hazard if improperly installed or attached
electrician. Reliable operating temperature is in an :
0 0 0 0 y way. Product should be installed in accordance
“4 F to 122 F (20 Cto 50 С). This product must with the owner’s manual, current electrical codes
iratallation code by a person familiar with the and/or the current National Electric Code (NEC).
construction and operation of the product and RISK OF ELECTRIC SHOCK: Turn off the main
hazards involved. Min. 90°C supply conductors. power at the circuit breaker before installing.
Supplier’s Declaration of Conformity: 47 CFR § 2.1077 Compliance Information
Responsible Party: Feit Electric Company, 4901 Gregg Road, Pico Rivera, CA 90660, USA 562-463-2852
Unique Identifier: CAM/DOOR/WIFI
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio |
communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the
equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an
experienced radio/TV technician for help. Any changes or modifications not expressly approved by the manufacturer could
void the user's authority to operate the equipment. CAN ICES-005 (B).
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
The device can be used in mobile (min 7.87 in.) exposure condition without restriction.
Limited Warranty |
This product is warrantied to be free from defects in workmanship and materials for up to 1 year from date of purchase. If
the product fails within the warranty period, please visit feit.com/help for instructions on replacement/refund or call
866.326.BULB. REPLACEMENT OR REFUND IS YOUR SOLE REMEDY. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ANY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.
LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IS HEREBY EXPRESSLY EXCLUDED. Some states and
provinces do not allow the exclusion of incidental or consequential damages, so the above limitation or exclusion may not
apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to
state or province to province.
2 FEIT ELECTRIC COMPANY | PICO RIVERA, CA | www. feit.com
Pre-Assembly |
TOOLS REQUIRED TO MOUNT THE DOORBELL
ТО
PHILLIPS PENCIL POWER DRILL
SCREW DRIVER
HARDWARE INCLUDED
A NOTE: Hardware not shown to actual size.
JE CR, ! EE FF & GG
Part Description Quantity
AA Smart Video Doorbell 1
KK Double-Sided Tape
LL Wire Terminal Block
MM Wire Terminal Extenders
BB Mounting Plate 1
CC Angle Wall Mount 1
DD Power Kit 1
EE Mounting Screws 6
FF Mounting Anchors 6
GG Angle Wall Mount Screws 2
HH Star-shaped Screw 1
Il Reset Pin 1
JJ Star-shaped Screwdriver 1
1
1
2
2
NN Terminal Screws
3 FEIT ELECTRIC COMPANY | PICO RIVERA, CA | www. feit.com
Description |
Lens
| External Power Port
Microphone o
WY
Status Light
( USB RST
Doorbell
Button G5
Reset L eso | Speaker
Tæt(C ©) E |
Micro USB — ый SD Card Slot
Item Description
External 12-24VAG 10VA transformer (not included) for a single doorbell application.
Power Port For two doorbells ringing the same mechanical chime box, there needs to
be 20 or 30 VA transformer.
Doorbell Button | Press to activate the doorbell.
Status Light e Blinking RED = Pairing Mode
e Solid RED = No Wi-Fi Connection
e Blinking BLUE = Connecting to Wi-Fi
e Solid BLUE = Connected to Wi-Fi
SD Card Slot Add 128GB or less microSD card to enable recording (not included).
Only supports microSD card with FAT32 format.
Reset Press and hold for 5 seconds with the Reset Pin (Il) to reset the doorbell.
4 FEIT ELECTRIC COMPANY | PICO RIVERA, CA | www. feit.com
Mounting & Installation |
À Shut Off the Power A installing the Smart Video Doorbell
Shut Off the power to your doorbell at the Attach your doorbell wires to the External
circuit or fuse breaker before installing. Power Port on the back of your Smart Video
Doorbell (AA). Use the provided Wire
O Extenders (MM) and Wire Terminal Block
—| (LL) if your existing doorbell wires are too
Pak roy short. Tighten the Terminal Screws (NN)
with the screwdriver. Attach the Smart
Video Doorbell (AA) onto the Mounting Plate
ol
e || ® (ВВ). Then secure it with a Star-Shaped
O x Screw (HH) at the bottom of the Smart
Video Doorbell (AA), using the Star-shaped
Screwdriver (JJ).
2 Mark Screw P ositions . NOTE: Your existing doorbell wires can go
Mark screw positions using the Mounting to any terminal on the External Power Port.
Plate (BB) on your wall.
Sy
a AT
> 00 I
wi | BB | [el | 12-2avac 4 Г > АА
Г > Se NJ
| JU AAN
> wy 7
© A BB 4 > À
a HH
3 Installing the Mounting Plate
Drill holes at the marked points if installing on a hard surface such as concrete or
brick. Insert Mounting Anchors (FF) into holes. You can skip this step if installing on
wood or siding. Fig. 1
== Ale
| EE
- BB
Use the Mounting Screws (EE) to
attach the Mounting Plate (BB) to
the wall (see Fig.1).
1111171717
ет
à
Optional Angled Wall Mount: Use the Mounting Fig. 2a Fig. 2b
Screws (EE) to attach the Angle Wall Mount (CC) to <— CC __ BB
the wall, then attach the Mounting Plate (BB) to the | — I С NG
Angle Wall Mount (CC). Use the Angle Wall Mount — = и |
Screws (GG) to screw in the Mounting Plate (BB) = =
(see Fig. 2a & 2b). ИГ Е | = GG
™ —
NOTE: Feed your doorbell wires through | | — —
A the center hole before mounting. Y I № i 9)) “ug
5 FEIT ELECTRIC COMPANY | PICO RIVERA, CA | www. feit.com
Power Kit Installation
Turn Off Power
Shut Off power to your doorbell and mechanical
chime at the circuit or fuse breaker before installing.
Ring your doorbell again to confirm the power is Off.
You will not be able to hear any sound.
NOTE: Your transformer should match the normal operation
= voltage. Do not use DC power supplies with wired chimes. Not all
chimes are compatible with the Smart Doorbell.
Mechanical Chime — For 12-24VAC normal operation, install the Power
Kit to give consistent power to your Smart Doorbell. Choose “Mechanical
Chime” setting in the app after pairing the device to function properly.
Check your installation if the Power Kit is buzzing or hot to touch. Your
wiring may be wrong. Consult a professional electrician for further
assistance.
Digital Chime — For 12-24VAC normal operation, DO NOT install the
Power Kit. Choose “None” setting in the app after pairing the device to
function properly.
Intercom System — Incompatible with the Smart Doorbell.
2 Locate Existing Mechanical Chime
Locate your existing mechanical chime. It is a
box that produces the sound when your
doorbell is pressed. Remove the cover (here is
an example of a mechanical chime).
REAR TRANS FRONT
—_ 1 а
3 Install Power Kit
Slightly unscrew the “FRONT” terminal and “TRANS” terminal. Connect each wire of the
Power Kit (DD) to each screw. It does not matter which wire connects to which screw.
Leave the existing doorbell wires and tighten both screws.
Locate the Power Kit (DD) included in the packaging.
The transformer terminal is usually labeled TRANS,
T, AC or 0. The front terminal is usually labeled
FRONT, F, 1 or C1.
| —
>= |
6 FEIT ELECTRIC COMPANY | PICO RIVERA, СА | www.feit.com
Power Kit Installation
A Replace The Cover
Use the included Double-Sided Tape (KK) to stick on the back of the Power Kit (DD).
Position the Power Kit (DD) where space is available. It is important that the wires DO
NOT interfere with any moving mechanical parts of the chime. Replace the cover.
==
APP Setup
—
Download and install the Feit Electric app
e Search for the Feit Electric app in the
App Store or Google Play Store.
e Download and install the Feit Electric
app on your smart device.
Feit Electric App
Set up the smart video doorbell using the Feit Electric app
e Check to be sure the camera is in pairing mode.
The RED indicator light must be blinking rapidly to
connect. If not already blinking, press and hold the
Reset Button until you hear an audible tone. Use
the Feit Electric app to complete the set up.
e Tap Add Device or the + sign, then select Camera
and confirm. You will be prompted to enter your
Wi-Fi network and password.
e Follow the directions in the app to pair your device
using the QR code. It may take 2-3 attempts.
e You can find more pairing methods in the drop
down menu on the device set-up page.
Be sure to connect to a 2.4 GHz Wi-Fi network
that covers your installation location.
8:217
eit v
> т
all = 2:267 + =,
Cance |
= E
="
чи"
Hold the phone approximately 6-12
м inches from the doorbell and wait
for the tone.
O) =
| |
Need Help?
Thank you for your purchase.
Questions, comments or feedback?
We'd love to hear from you.
Visit feit.com/help for support
or connect with us:
Ob Ao
т
[=]
„mil [|
@FeitElectric @FeitElectriclnc feitelectriclighting
FEIT ELECTRIC COMPANY | PICO RIVERA, CA | www. feit.com
Troubleshooting
PROBLEM
CORRECTIVE ACTION
Doorbell will not connect
to my Wi-Fi network
+ Make sure the LED is blinking red. If the LED is not blinking red, you will
need to press and hold Reset Button located at the bottom of the doorbell
(see the Description section).
¢ Make sure the Wi-Fi network is a 2.4GHz network, device will not connect to
a 5GHz network.
« Test your Wi-Fi network with other devices such as your phone or computer
to make sure it is operating properly.
* The Wi-Fi connection may be out of range during pairing. Use your phone to
check range, it is recommended to have at least 2 signal bars showing for
proper connection.
¢ Your Wi-Fi network password is case sensitive, make sure you are entering
it correctly.
The doorbell is offline
* There could be a temporary issue with your internet connection (e.g., service
disruption). Please try again in a few minutes.
¢ Make sure your Wi-Fi router is turned On.
« The doorbell may not have power to it, make sure the wall switch and breaker is
in the On position.
¢ Make sure the doorbell is getting a good signal from your Wi-Fi router. Use your
phone to check range, it is recommended to have at least 2 signal bars showing
for proper connection.
¢ The doorbell may have been disconnected from your Wi-Fi network, press and
hold Reset Button (see the Description section) until you see a blinking red LED
and hear an audible tone.
What do the blinking
LEDs mean?
¢ Blinking RED = Pairing Mode
¢ Solid RED = No Wi-Fi Connection
¢ Blinking BLUE = Connecting to Wi-Fi
« Solid BLUE = Connected to Wi-Fi
Live video stream is
slow to load
Doorbell streaming issues may be caused by any of the following:
« Your phone's cellular connection, which relies on mobile coverage.
* Limited internet bandwidth at home. For example, other video streaming
services running at the same time on your network can cause congestion
slowing down the internet upload and download speeds.
Wi-Fi reception may not be stable or work reliably if the doorbell's Wi-Fi signal
strength is less than 2 signal bars. You may need to install a Wi-Fi repeater or
extender to boost the Wi-Fi signal.
How do | reset the doorbell
to reenter pairing mode?
Press and hold reset button located at the bottom of the doorbell (see the
Description section) until you see a blinking red LED and hear an audible tone.
The doorbell is not
recording
Make sure you have added optional microSD card (not included).
Make sure Record Button is turned On in app, under SD Card Settings.
This is located in the upper right corner in the control panel.
Make sure that the microSD card is installed correctly. To confirm the doorbell
is recognizing the microSD card, go to the SD Card Settings in the Settings
menu and make sure microSD Card Capacity menu shows Total Capacity,
Used and Free Space. lf this does not appear you may consider reformatting
the microSD card.
WARNING: Reformatting microSD card will delete all videos stored on
card. Please go through the troubleshooting section before doing so or
contact our Customer Support Team.
How do | set the doorbell
to Event or Continuous
Recording?
In the Settings menu under SD Card Settings make sure Record Button is
turned On and then select Event Recording or Continuous Recording.
How can | check the
available space on the
SD Card?
In the Settings menu under SD Card Settings, you will see Used Space and
Free Space.
Note: Doorbell only supports 128GB or less microSD cards with FAT32 format.
What happens when the
microSD card reaches
full capacity?
Once the microSD card reaches full capacity, new videos will start rewriting
(deleting) over the oldest videos.
Can | use a new microSD
card if | do not want to
record over existing videos?
Yes, you can use a new microSD card if you do not want to record over existing
videos by removing the doorbell from the mounting plate and replacing the
existing microSD card with a new one as long as it does not exceed 128GB.
Once this is completed you will need to format the microSD card by going to the
SD Card Settings in the Settings menu and pressing Format SD Card then Confirm.
WARNING: Reformatting microSD card will delete all content stored
on card.
SD™, microSD™, and SDHC™ are trademarks or registered trademarks of SD-3C, LLC in the United States, other countries, or both.
8 FEIT ELECTRIC COMPANY | PICO RIVERA, CA | www. feit.com
">
