Model: CAM/WM/WIFI/BAT
Thank you for your purchase. Questions, comments
or feedback? We'd love to hear from you.
Visit feit.com/help for support.
SMART OUTDOOR CAMERA
IMPORTANT SAFETY INSTRUCTIONS
AND INSTALLATION GUIDE
_\
o ON
Works with
a Feit Electric app
°
Only supports
2.4GHz Wi-Fi
Networks
READ BEFORE INSTALLATION.
SAVE THESE INSTRUCTIONS.
Questions, problems, missing parts? Before returning to the store,
contact Feit Electric Customer Service
8 a.m. - 5 p.m., PST, Monday - Friday
FEIT.COM
REVO13
We appreciate the trust and confidence you have placed in Feit Electric through the purchase of this product. We strive to
continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your
home improvement needs. Thank you for choosing Feit Electric.
Table of Contents
Safety Information .....................,.,.,.,,,,.... 2
FCC Statement...................,.,.,.,.,.,.,.,.,., 2
Warranty .... cc cece cence eee ro 2
Pre-Assembly ............,..,.,.,,.,.,..,.,.,,..... 3
Parts of the Camera ....,...,..,...,,.,.,..,.,.,,.,.., 3
Bracket (A) Installation. ..................,......,,.... 4
Bracket (В) Installation. ....................,..,..,,.... 5
App SOU... cocoa 6
Need Help?......................................... 6
Troubleshooting....................,.,.,.,.,.,.,.,., 7
Safety Information |
IMPORTANT SAFEGUARDS:
CAUTION: Please read all information carefully
ALWAYS FOLLOW BASIC SAFETY PRECAUTIONS
before installation.
WHEN USING ELECTRICAL PRODUCTS,
ESPECIALLY WHEN CHILDREN ARE PRESENT. CAUTION: Intended for outdoor use. May be used
indoors.
CAUTION: CONTAINS NON-REPLACEABLE
Supplier’s Declaration of Conformity: LITHIUM-ION BATTERY(IES).
47 CFR § 2.1077 Compliance Information
Responsible Party:
Feit Electric Company
4901 Gregg Road,
Pico Rivera, CA 90660, USA
562-463-2852
Unique Identifier:
CAM/WM/WIFI/BAT
CAUTION: Only use 5VDC 1A adapter (not included)
for charging. Risk of fire, explosion, and burns. Do not
disassemble, crush, or incinerate. Intended for indoor
and outdoor use. This product is not user-serviceable.
Do not attempt to open the product enclosure for any
reason. Reliable operating temperature is -4°F to
122°F (-20°C to 50°C).
РРР
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the
equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an
experienced radio/TV technician for help. Any changes or modifications not expressly approved by the manufacturer could
void the user's authority to operate the equipment. CAN ICES-005 (B).
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
The device can be used in mobile (min 7.87 in.) exposure condition without restriction.
Limited Warranty
This product is warrantied to be free from defects in workmanship and materials for up to 1 year from date of purchase. If
the product fails within the warranty period, please visit feit.com/help for instructions on replacement/refund or call
866.326.BULB. REPLACEMENT OR REFUND IS YOUR SOLE REMEDY. EXCEPT TO THE EXTENT PROHIBITED BY
APPLICABLE LAW, ANY IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.
LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IS HEREBY EXPRESSLY EXCLUDED. Some states and provinces
do not allow the exclusion of incidental or consequential damages, so the above limitation or exclusion may not apply to
you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state or
province to province.
2 FEIT ELECTRIC COMPANY | PICO RIVERA, CA | www.feit.com
Pre-Assembly
TOOLS REQUIRED TO MOUNT CAMERA
|
®
PHILLIPS PENCIL POWER DRILL
SCREW DRIVER
HARDWARE INCLUDED
ua de tal
A NOTE: Hardware not shown to actual size.
FF
Part | Description Quantity
AA Smart Outdoor Camera 1
BB USB Cord 1
CC Mounting Screws 9
DD Mounting Anchors 9
EE Metal Mounting Bracket 1
FF Adjustable Mounting Bracket 1
Description
NOTE: Before installing, fully charge the battery using the
provided USB Cord (BB) by plugging it into a power source.
обобобо
95020202
om | L 200000005
ens Reset 0002050
|
Photosensor | N 25
O Micro USB
PIR |
D Charging LED
A Indicator
LI
Status Light Speaker
Microphone
Power Button
SD Card Slot
Input Power (Micro USB): 5VDC, Max. 1A
Power Button Press and hold the button for 3 seconds to turn On/Off the camera.
Blinking RED = Pairing Mode
Status Light Solid RED = No Wi-Fi Connection
Blinking BLUE = Connecting to Wi-Fi
Solid BLUE = Connected to Wi-Fi
Add 128GB or less microSD card to enable recording (not included).
SD Card Slot Only supports microSD card with FAT32 format.
Reset Press and hold for 5 seconds on the Reset button to reset the camera.
Charging LED Solid Red: Battery is charging
Indicator Solid Blue: Charging is complete
Battery Capacity | 9600mAh (contains two 21700 non-replaceable lithium-ion batteries)
3 FEIT ELECTRIC COMPANY | PICO RIVERA, CA | www.feit.com
Wall Mount Installation |
1 Mark Screw Positions
Mark screw positions using the
Adjustable Mounting Bracket (FF)
on your wall.
2 Inserting the Mounting Anchors
Drill holes at the marked points if install-
ing on a hard surface such as concrete or
brick. Insert Mounting Anchors (DD) into
holes. You can skip this step if installing
on wood or siding.
<= ГП _
4 Attaching the Camera
Push and hold the Power Button on the
back of your Smart Outdoor Camera (AA)
until it turns On. Twist the Smart Outdoor
Camera (AA) onto the Adjustable
Mounting Bracket (FF).
Adjustable
mount
provides
360° swivel
and 90° of
tilt.
3 Attaching the Bracket
Use the Mounting Screws (CC) to attach
the Adjustable Mounting Bracket (FF) to
the wall.
AN VANA \ \
5 Adjust Camera
Adjust the camera angle as desired.
Tighten the thumbscrew and white
knob when finished.
O.
CA
Y
After adjusting the camera angle,
rotate the thumbscrew and white knob
to lock the position.
4
FEIT ELECTRIC COMPANY | PICO RIVERA, СА | www feit.com
Magnet Mount Installation |
1 Mark Screw Positions 4 Attaching the Camera
Mark screw positions using the Push and hold the Power Button on
Metal Mounting Bracket (EE) the back of your Smart Outdoor
on your wall. Camera (AA) until it turns On. Attach
EE the Smart Outdoor Camera (AA) to
the Metal Mounting Bracket (EE).
O) EE
2 Inserting the Mounting Anchors
Drill holes at the marked points if install-
ing on a hard surface such as concrete or
brick. Insert Mounting Anchors (DD) into ()
holes. You can skip this step if installing
on wood or siding. 7 7
— ES a DD
3 Attaching the Bracket
Use the Mounting Screws (CC) to
attach the Metal Mounting Bracket
(EE) to the wall.
EE
ql
Front View
5 FEIT ELECTRIC COMPANY | PICO RIVERA, CA | www.feit.com
APP Setup |
Download and install the Feit Electric app
e Search for the Feit Electric app in the
App Store or Google Play Store.
e Download and install the Feit Electric Feit Electric App
app on your smart device.
2, Download on the
a App Store
Хх Google play
Set up the smart indoor camera using the Feit Electric app
e Check to be sure the camera is in
pairing mode. The RED indicator light
must be blinking rapidly to connect.
If not already blinking, press and nn == u =
hold the Reset Button until you hear Feit v e esas
an audible tone. Use the Feit Electric a
app to complete the set up.
e Tap Add Device or the + sign, then
select Camera and confirm. You will
be prompted to enter your Wi-Fi
network and password. ee Hold the phone approximately 6-12
e Follow the directions in the app to ly inches from the camera and wait
pair your device using the QR code. It for the tone.
may take 2-3 attempts.
e You can find more pairing methods
in the dropdown menu on the device é
set-up page.
ojo]
LE]
Be sure to connect to a 2.4 GHz Wi-Fi network | |
that covers your installation location.
Need Help?
Thank you for your purchase.
Questions, comments or feedback?
We’d love to hear from you.
Visit feit.com/help for support
or connect with us:
@FeitElectric @FeitElectricinc feitelectriclighting
[m]
le
—
[m]
6 FEIT ELECTRIC COMPANY | PICO RIVERA, CA | www.feit.com
Troubleshooting |
PROBLEM CORRECTIVE ACTION
Camera will not
connect to my
Wi-Fi network
e Make sure the LED is blinking red. If the LED is not blinking red, you will need to press and
hold Reset Button located behind the cover at the back of the camera (see the Description section).
e Make sure the Wi-Fi network is a 2.4GHz network, device will not connect to a 5GHz network.
e Test your Wi-Fi network with other devices such as your phone or computer to make sure it is
operating properly.
e The Wi-Fi connection may be out of range during pairing. Use your phone to check range, it is
recommended to have at least 2 signal bars showing for proper connection.
e Your Wi-Fi network password is case sensitive, make sure you are entering it correctly.
The camera
is offline
e There could be a temporary issue with your internet connection (e.g., service disruption).
Please try again in a few minutes.
e Make sure your Wi-Fi router is turned On.
e The camera may not have power to it, make sure the wall switch and breaker is in the On position.
e Make sure the camera is getting a good signal from your Wi-Fi router. Use your phone to
check range, it is recommended to have at least 2 signal bars showing for proper connection.
e The camera may have been disconnected from your Wi-Fi network, press and hold Reset
Button (see the Description section) until you see a blinking red LED and hear an audible tone.
What do the
blinking
LEDs mean?
e Blinking RED = Pairing Mode
e Solid RED = No Wi-Fi Connection
e Blinking BLUE = Connecting to Wi-Fi
e Solid BLUE = Connected to Wi-Fi
Live video stream
is slow to load
Camera streaming issues may be caused by any of the following:
e Your phone's cellular connection, which relies on mobile coverage.
e Limited internet bandwidth at home. For example, other video streaming services running at the same time
on your network can cause congestion slowing down the internet upload and download speeds.
e Wi-Fi reception may not be stable or work reliably if the camera's Wi-Fi signal strength is less than 2
signal bars. You may need to install a Wi-Fi repeater or extender to boost the Wi-Fi signal.
How do | reset the
camera to reenter
pairing mode?
e Press and hold reset button located at the back of the camera (see the Description section) until you see a
blinking red LED and hear an audible tone.
The camera is not
recording
e Make sure Record Button is turned On in app, under SD Card Settings. This is located in the Settings menu
on the upper right corner in the control panel.
e Make sure that the microSD card is installed correctly. To confirm the camera is recognizing the microSD
card, go to the SD Card Settings in the Settings menu and make sure microSD Card Capacity menu shows
Total Capacity, Used and Free Space. If this does not appear you may consider reformatting the
microSD card.
WARNING: Reformatting microSD card will delete all videos stored on card. Please go through the
troubleshooting section before doing so or contact our Customer Support Team.
How can | check the
available space on the
SD Card?
e In the Settings menu under SD Card Settings, you will see Used Space and Free Space.
Note: Camera only supports 128GB or less microSD cards with FAT32 format.
What happens when
the microSD card
reaches full capacity?
e Once the microSD card reaches full capacity, new videos will start rewriting (deleting) over
the oldest videos.
Can | use a new
microSD card if | do
not want to record
over existing videos?
e Yes, you can use a new microSD card if you do not want to record over existing videos by removing the
back cover on the camera and replacing the existing microSD card with a new one as long as it does not
exceed 128GB. Once this is completed you will need to format the microSD card by going to the SD Card
Settings in the Settings menu and pressing Format SD Card then Confirm.
WARNING: Reformatting microSD card will delete all content stored on card.
SD™, microSD™, and SDHC™ are trademarks or registered trademarks of SD-3C, LLC in the United States, other
countries, or both.
7 FEIT ELECTRIC COMPANY | PICO RIVERA, CA | www.feit.com
">
