MODEL PART DIAGRAM

FRONT

Control Panel

Front Panel

BACK

Handle

Air Outlet

Vent

Power Plug

PACKAGE CONTENTS

Unit

(1) Pre-Filter

(1) Washable AOC

TM

(1) True HEPA Filter

Carbon Filter

Remote

Control

User Manual

Remote Control and User Manual will be located on the top insert after the box is opened.

WHERE TO USE

12~18 in

12~18 in

Allow 12 ~ 18 in. of space between TVs, radios, and other electronics

Electromagnetic interference from certain electronics may cause product malfunction.

Place indoors away from direct sunlight

Direct exposure may cause product malfunction or failure.

Only place on hard, flat surfaces

Flimsy or slanted surfaces may result in abnormal noise and vibrations.

Allow at least 12 ~ 18 in. from walls for maximum air flow

1

4-STAGE AIR PURIFICATION

1 Pre-Filter 2 Washable AOC™ Carbon Filter 3 True HEPA Filter 4 PlasmaWave ®

01. Pre-Filter

Designed to catch larger airborne particles found indoors.

03. True HEPA Filter

Winix True HEPA captures 99.99%* of airborne allergens

LQFOXGLQJSROOHQGXVWVPRNHSHWGDQGHUDQGRWKHUXOWUDͤQH

SDUWLFOHVDVVPDOODVPLFURQV

*Based on independent laboratory tests conducted

RQLQDQLPDWHSDUWLFOHVDVVPDOODVPLFURQV

MAINTENANCE

02. Washable AOC™ Carbon Filter

Reduces VOCs and household odors from cooking, pets, and smoke.

04. PlasmaWave ®

Winix PlasmaWave Technology may help to reduce airbone contaminants*.

*Tested by an independent third-party laboratory.

Visit www.winixamerica.com for more details.

When to Replace Filters

Filter

Pre-Filter

Washable AOC™

Carbon Filter

True HEPA Filter

Indicator Light none

When to Service

Clean once every 14 days

* Clean once ever\PRQWKV

When to Replace

Permanent

Last Approx. 12 months

Can NOT be WASHED

• When the Check Filter Indicator LED is on, it is time to replace the True HEPA Filter and Washable AOC™ Carbon Filter.

• IntervDOVEHWZHHQͤOWHUreplacement may vary depending on environment.

* Filter performance may decrease after each wash and depending on contamination level prior to washing.

4

CONTROL PANEL

01 02 03 04 05 06 07 08

09 10

01. Auto Indicator

Indicates whether Auto Mode is enabled or disabled.

02. Sleep Indicator

Indicates whether Sleep Mode is enabled or disabled.

03. PlasmaWave ® Indicator

Indicates whether PlasmaWave ® disabled.

is enabled or

04. Fan Speed Indicator

Indicates the current fan speed.

05. Timer Indicator

If timer has been set, the LED light indicates the set time of operation.

06. Filter Replacement Indicator

/('OLJKWLQGLFDWHVZKHQLWLVWLPHWRFKDQJHWKHͤOWHr.

07. Light Sensor

Detects the amount of ambient light in the environment.

08. Smart Sensor

Detects the amount of odorous gas in the environment. When in Auto mode, the fan speed adjusts according to the detected amount of gas.

11

2

12 13 14 15

09. Power Button

Turns the unit on or off.

'XULQJWKHͤUVWVHFRQGVRISRZHULQJXSWKH$LU

Quality Indicator will cycle through Blue, Amber and Red colors. Smart Sensor takes approximately

4minutes to detect the air quality in the environment before normal operation begins.

10. Mode Button

Press to cycle through to set the mode of operation

(Auto, Sleep). The unit will default to Auto with

PlasmaWave ® HQDEOHGZKHQͤUVWSRZHred on.

Auto Mode:

• Auto Mode automatically adjusts fan speeds according to your indoor air quality. The fan speed will adjust to low when air quality is good, medium when fair, and to high when poor.

Sleep Mode:

• Fan speed will automatically set to minimum speed

(lower than 'Low') which will be nearly silent.

• When Sleep Mode is active, PlasmaWave ® disabled, but it can be turned back on.

will be

INITIAL OPERATION

Latch

1. Remove the front panel by grasping its upper edge and gently pulling forward.

03

02

01

4. ,QVWDOOWKHͤOWHUVXQWLOWKe\ͤWVHFXrely in place.

True HEPA Filter (back)

Washable AOC™ Carbon Filter (middle)

3re-Filter (front)

Latch

11. PlasmaWave ® Button

Enables or disables PlasmaWave ® .

"When the unit is running, you may hear a chirping or buzzing sound. The sound is from large particles passing through PlasmaWave ® not signify product failure."

, it is normal and does

Press the PlasmaWave ® button when the unit is on to enable or disable this feature.

12. Air Quality Indicator

Color coded LED light indicates one of three levels of Air

Quality: Red (poor), Amber (fair), and Blue (good).

REMOTE CONTROL

Operates in a 20 foot radius:

D

A

C

B

• (A) Power: Turns the unit on or off.

• (B) Auto: Enables Auto Mode.

• (C) Fan Speed: Enables manual operation of the fan speeds.

• (D) Turbo: Enters Manual Mode and directly sets the fan speed to Turbo.

How to replace your remote’s battery:

1. Flip over your remote and open

1.A

1.B

battery tray.

1.A: Pinch the lever in while,

1.B: Pulling the battery tray out.

2.A

2. Insert battery into the battery tray as shown.

2.A: Make sure the polarities [+]

[-] match when placing in the tray.

3.A

Close the battery tray.

3.A: Reinsert battery tray into remote until you hear a "click" sound.

ę KHHSDOOXVHGEDWWHULHV&5LQVDfe place.

3

13. Fan Speed Button

Enables manual operation of the unit's fan speeds.

• Press to cycle through and set the desired fan speed

(Low, Medium, High, Turbo).

14. Timer Button

Press to cycle through and set desired length of operation (1hr, 4hr, 8hr, [NO TIMER]).

15. Filter Reset Button

After rHSODFLQJWKHͤOWHr, turn on the unit and then use a thin object, such as a paper clip, to press the Filter

Reset Button for 5 seconds.

W A R N I N G

• Incorrect battery usage may cause battery fluid leakage and/or damage.

• When not using remote for extended periods of time, remove the battery.

• Avoid dropping or damaging the remote.

• WARNING: Chemical Burn Hazard. Keep batteries away from children.

• This product contains a lithium button/coin cell battery. If a new or used lithium button/coin cell battery is swallowed or enters the body, it can cause severe internal burns and can lead to death in as little as

2 hours.

• Always completely secure the battery compartment.

• If the battery compartment does not close securely, stop using the product, remove the batteries, and keep it away from children.

• If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

• The batteries should be disposed of properly, including keeping them away from children. Even used batteries may cause injury.

REPLACING FILTERS

Resetting Filter Life:

After replacing your True HEPA Filter, place the Pre-Filter back in and close the Front

Panel. While the unit is on, hold the Filter

Reset Button for at least 5 seconds until you hear the beep. After the beep, the Filter

Replacement Indicator will disappear.

Your Winix True HEPA is now reset.

CLEANING CARE

Cleaning the Filters: Cleaning the Exterior & Interior:

2. Remove the Pre-Filter, then the plastic bag of

ͤOWHUVEHKLQGLW

5. $IWHUͤOWHUVDre installed, close the front panel.

RemovHͤOWHUVIrom protective plastic bag.

5

6. Insert the power cord into an electrical outlet.

Use a vacuum cleaner or soft brush to clean the

Pre-Filter

• If it is excessively soiled, rinse in room temperature water.

• Do not use detergent or soap.

• $OORZWKHͤOWHUWRGry for 24 hours or more before using.

• Intervals between ͤlter cleaning may vary depending on the air quality in the environment.

To clean the Washable AOC™ Carbon Filter, remove from unit and rinse under lightly running room temperature water.

• Do not use detergent or soap.

• $OORZWKHͤOWHUWRGry for 24 hours or more before using.

• Do not use hot water ovHU o F.

N O T I C E

Do not use benzene, alcohol, or other volatile fluids, which may cause damage or discoloration.

6

1. Open the front panel and clean the interior with a vacuum cleaner.

• A hand vacuum or hose attachment will work best.

2. Dampen a cloth with room temperature water and wipe down the interior and exterior of the unit.

Wipe the unit down with a clean, dry cloth.

• Ensure no moisture remains before plugging the unit back in.

* For optimal performance, clean every 1 - 2 months.

N O T I C E

• When cleaning the unit, always unplug the power cord

ͤUVWDQGWKHQZDLWXQWLOWKHXQLWKDVFRROHGGRZQ

• Never disassemble, repair, or modify this unit yourself.

• Do not use flammable sprays or liquid detergents.

• Do not allow children to clean or maintain the unit.

• Before cleaning or maintaining, ensure unit is unplugged.

SAFETY AND CAUTIONS

Before operating this equipment, carefully read and follow these safety cautions.

EnsurHͤOWHUVDre inserted before running unit.

5XQQLQJWKHXQLWZLWKRXWͤOWHUVFDQVKRrten the lifespan of the unit and cause electric shock or injury.

Be sure foreign objects are NOT inserted into the vents on the unit.

Objects can include pins, rods, and coins.

Do not touch any part of the interior of the unit with wet hands.

The high voltage may cause electric shock.

Ensure unit intake and outlet vents do not become blocked.

Blockage may lead to increased internal termperatures causing product failure and deformation.

Do not use the unit as a step stool or place heavy objects on the unit.

Personal injury may occur or product failure and deformation.

W A R N I N G

Follow these instructions to reduce the risk of serious injury or death and to reduce risk of damaging the unit.

• If the power cord is damaged, it must be replaced by a special cord. Reassembly is available from the manufacturer or its service agent.

• This appliance is not intended for use by a person

(including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge of the unit, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

• This unit is not intended to be used to preserve documents or art conservation.

7

Do not pull on the power cord when unplugging the unit.

Do not tie or knot the power cord when unit is in operation.

If the unit becomes submerged in water, unplug it and contact customer service.

Do not unplug or move the unit while in operation.

Do not plug additional appliances into the same outlet or power supply.

Do not touch the plug with wet hands.

Unplug the unit when not in operation for extended periods of time.

Do not place around heating elements.

Do not use around mist or fumes from industrial oil or around large quantities of metallic dust.

The cord can become damaged by forcefully bending, pulling, twisting, bundling, pinching or placing heavy objects on it.

Do not install in any sort of motor or transport vehicle (trucks, boats, ships, etc.).

Do not place in an area with excessive amounts of noxious gases.

Do not place near any flammable materials

(aerosols, fuel, gases, etc.).

Do not have the unit facing into wind or drafts.

Do not place below any electrical outlet.

Do not place in excessively humid areas where the unit may become wet.

Do not place unit closer than 12 inches from the wall during operation. It may cause condensation on the wall and the surrounding area.

FREQUENTLY ASKED QUESTIONS

The unit does not turn on at all.

• Is the plug securely attached to the outlet?

- Make sure the outlet has power going to it and ensure the plug is secured.

• Is there a power outage?

- Check to see if other lights and electrical equipment are working and try again.

The unit doesn’t work in Auto Mode.

• Has Auto Mode been selected?

- Press the Fan Speed button until Auto Mode is selected.

• Is the sensor blocked or clogged?

- Wipe Smart Sensor with wet cloth, then dry.

It vibrates and makes a lot of noise.

• Is it running on a slanted or uneven surface?

- Move the unit to a hard, flat, even area.

The power plug and outlet feel hot.

• Is the plug securely plugged in?

- Make sure the plug is properly plugged into the outlet.

There is a strange smell.

• Is it being used in a place with a lot of smoke, dust, or odors?

- Clean the air intakes on either side and clean the

Pre-Filter.

- Replace the Washable AOC™ Carbon Filter and

True HEPA Filter.

The fan strength is weak. The unit is not purifying the air.

• Is the Check Filter Indicator light on?

- &KDQJHWKHͤOWHUVDVrequired.

The display panel is dim.

• Is the Light Sensor blocked by debris?

- When Auto Mode is on, Sleep Mode is automatically activated when the Light Sensor detects that the room is dark.

PRODUCT WARRANTY

The terms of the warranty are as follows:

1. This product is manufactured under stringent quality control and inspections.

2. The warranty will be voided if product failure is a result of negligence or misuse by the consumer.

3. A proof of purchase must be presented upon claiming a Product Warranty.

4. Store the proof of purchase in a safe place or register your product on winixamerica.com to upload your proof of purchase.

5. This warranty is valid only in the USA and Canada.

* for more information visit

https://winixamerica.com/terms-and-conditions/

Product Name

Model Name

Purchase Date

Warranty Period

Place of Purchase

Place of Purchase tel.

Customer

Address

Name

Tel.

$LU3XULͤHU

5500-2

Two (2) Years

After purchase, be sure to complete all of the above information.

9

SAFETY INSTRUCTIONS

Thank you for purFKDVLQJD:LQL[DLUSXULͤHr. This product is for household use only.

IMPORTANT CAUTIONS FOR USING YOUR AIR PURIFIER:

WARNING: Follow the instructions in this manual to reduce the risk of electric shock, short cirFXLWDQGRUͤre.

• Do not repair or modify the unit yourself.

• All repairs should be completed b\DTXDOLͤHG:LQL[ technician.

• The plug for this unit is polarized with one blade wider than the other. Do not force the plug into an electrical outlet. Do not alter the plug in any way. If the plug does

QRWͤWLQWRWKHRXWOHWreverse the plug. If it still does not

ͤW, contact a qualiͤHd technician to install a proper outlet.

• Do not use if the power cord or plug is damaged or the connection to the wall outlet is loose.

• Use AC 120 V only.

• Do not damage, break, forcefully bend, pull, twist, bundle, coat, pinch, or place heavy objects on the power cord.

• Periodically remove dust from the power plug. This will reduce the risk of shock due to humidity build up.

• Remove the power plug from the outlet before cleaning the unit. When removing the power plug, grasp by holding the plug itself, never hold by the cord.

• If the power plug is damaged, it must be replaced by the manufacturHURUDTXDOLͤHGWHFKQLFLDQ

• Remove the power plug from the outlet when not in use.

• Do not handle the power plug with wet hands.

• Do not operate the unit when using indoor smokegenerating insecticides.

• Do not clean unit with benzene or paint thinner.

Do not spray insecticides on the unit.

• Do not use the unit where it is humid or where the unit may become wet, such as the bathroom.

• Do not inserWͤQJHUVRUIRreign objects into air intake or outlet.

• Do not use the unit near flammable gases. Do not use near cigarettes, incense, or other spark-creating items.

• Unit will not remove carbon monoxide emitted from heating appliances or other sources.

• Unplugging the product disconnects the remote functions.

IMPORTANT PRECAUTIONS FOR USING YOUR AIR PURIFIER:

• Do not block the intake or outlet vents.

• Do not use near hot objects, such as a stove.

• Do not use where the unit may come into contact with steam.

• Do not use the unit on its side.

• Keep away from products that generate oily residue, such as a deep fryer.

• Do not use detergent to clean the unit.

• 'RQRWRSHUDWHZLWKRXWDͤOWHr.

• Do not wash and reuse the True HEPA Filter.

• Hold the handle on the back of the unit to transport.

• Do not hold by the front panel.

• Do not stick any small objects into the air outlet vents or fan.

BATTERY IN REMOTE CONTROL:

• This product contains a button battery.

If swallowed, it could cause severe injury or death in just two hours. Seek medical attention immediately.

• "In French: Cet article contient une pile bouton. De graves blessures ou la mort pourraient suivre dans les deux heures suivant I'ingestion. Demander I'aide de professionnels de la santé sur le champ."

8

UNIT SPECIFICATIONS

Model Name

Power Voltage

Power Rate

Veriͤed Room Size

Dimensions

Weight

Replacement Filter

5500-2

AC 120 V / 60 Hz b: bVTIW bLQ(W™bLQ'™bLQ+ bOEV

Filter H/SKU: 116130

The exterior, design, and prRGXFWVSHFLͤFDWLRQVPay be changed without prior notice to improve product performance.

WDUQLQJ&KDQJHVRUPRGLͤFDWLRQVWRWKLVXQLWQRWH[Sressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic

Development Canada's license-exempt RSS(s). Operation is subject to the following two conditions:

• This device may not cause interference.

• This device must accept any interference, including interference that may cause undesired operation of the device.

"In French: Cet appareil contient des émetteurs/récepteurs exemptés de licence et conformes aux normes Innovation,

Science et Economic. RSS(s) sans licence de Développement Canada. Le fonctionnement est soumis aux deux conditions suivantes:

• cet appareil ne doit pas causer d’interférences nuisibles, et

• cet appareil doit accepter toute interférence reçue, y compris les interférences pouvant provoquer un fonctionnement non souhaité."

10

AIR PURIFIER

Model

Use & Care

Guide

5500-2

• The product warranty is printed on the back of this guide.

• This product is manufactured for use only in USA / CA.

• This product is suitable for 120 V only.

The enerJ\HIͤFLHQF\RIWKLV(1(5*<6TAR cerWLͤHGPRGHOLVPHDVXred based on a ratio between the model’s CADR for smoke and the electrical energy it consumes, or CADR/Watt.

User Manual

Contact Winix for product related inquiries and customer service

• Dedicated Call Center:

ȧ

(877) 699-4649

• Website: www.winixamerica.com

To expedite service, please specify the model name and number, the nature of the problem, your contact information, and your address.

2610-0253-05 Rev.0