STFW3N150, STH3N150-2
STP3N150, STW3N150
Datasheet
N-channel 1500 V, 2.5 A, 6 Ω typ., PowerMESH Power MOSFETs in TO-3PF, H 2 PAK-2, TO-220 and TO247 packages
TAB
TO-3PF
1
2
3
G(1)
TO-220
1
2
3
D(2, TAB)
S(3)
(TO-3PF, TO-220 and TO-247)
G(1)
TAB
2
1
3
TO-247
1
2
3
D(TAB)
Features
Order codes
STFW3N150
STH3N150-2
STP3N150
V
DS
1500 V
R
DS(on)
max.
9 Ω
I
D
2.5 A
P
TOT
63 W
140 W
STW3N150
• 100% avalanche tested
• Intrinsic capacitances and Qg minimized
• High speed switching
• Fully isolated TO-3PF plastic package, creepage distance path is 5.4 mm (typ.)
Applications
• Switching applications
S(2, 3)
AM15557v1
Description
These Power MOSFETs are designed using the STMicroelectronics consolidated strip-layout-based MESH OVERLAY process. The result is a product that matches or improves on the performance of comparable standard parts from other manufacturers.
Product status link
STFW3N150
STH3N150-2
STP3N150
STW3N150
DS5052 - Rev 12 - May 2020
For further information contact your local STMicroelectronics sales office.
www.st.com
1
STFW3N150, STH3N150-2, STP3N150, STW3N150
Electrical ratings
Electrical ratings
Table 1.
Symbol Parameter
V
DS
V
GS
Drain-source voltage
Gate-source voltage
I
D
Drain current (continuous) at T
C
= 25 °C
Drain current (continuous) at T
C
= 100 °C
I
DM
(2)
P
V
TOT
ISO
Drain current (pulsed)
Total power dissipation at T
C
= 25 °C
Insulation withstand voltage (RMS) from all three leads to external heat sink (t = 1 s; T
C
= 25 °C)
Derating factor
T stg
T
J
Storage temperature range
Operating junction temperature range
1. Limited by maximum junction temperature.
2. Pulse width limited by safe operating area.
Value
TO-3PF H 2 PAK-2 TO-220 TO-247
1500
±30
2.5
(1)
1.6
(1)
2.5
1.6
10
63 140
Unit
V
V
A
A
W
3.5
0.5
1.12
kV
W/°C
-55 to 150 °C
Table 2. Thermal data
Symbol Parameter
R thj-case
R thj-amb
R thj-pcb
(1)
Thermal resistance junction-case
Thermal resistance junction-ambient
Thermal resistance junction-pcb
1. When mounted on 1 inch 2 FR-4 board, 2 oz Cu.
Value
TO-3PF H 2 PAK-2 TO-220 TO-247
2 0.89
50 62.5
50
35
Unit
°C/W
°C/W
°C/W
Symbol
I
AR
E
AS
Table 3.
Parameter
Avalanche current, repetitive or not-repetitive
(pulse width limited by T
J
max)
Single pulse avalanche energy
(starting T
J
= 25 °C, I
D
= I
AR
, V
DD
= 50 V)
Max value
2.5
450
Unit
A mJ
DS5052 - Rev 12 page 2/22
2
STFW3N150, STH3N150-2, STP3N150, STW3N150
Electrical characteristics
Electrical characteristics
(T
C
= 25 °C unless otherwise specified)
Table 4. Static
Symbol
V
(BR)DSS
I
DSS
I
GSS
V
GS(th)
R
DS(on)
Parameter Test conditions
Drain-source breakdown voltage V
GS
= 0 V, I
D
= 1 mA
V
GS
= 0 V, V
DS
= 1500 V
Zero gate voltage drain current
V
GS
= 0 V, V
DS
= 1500 V, T
C
= 125 °C
(1)
Gate-body leakage current
Gate threshold voltage
V
DS
= 0 V, V
GS
= ±30 V
V
DS
= V
GS
, I
D
= 250 µA
Static drain-source on-resistance V
GS
= 10 V, I
D
= 1.3 A
1. Defined by design, not subject to production test.
Min.
Typ.
Max.
Unit
1500 V
10
µA
500
3 4
6
±100 nA
5
9
V
Ω
Table 5. Dynamic
Symbol
C iss
C oss
C rss
C oss eq.
(1)
Parameter
Input capacitance
Output capacitance
Reverse transfer capacitance
V
DS
Test conditions
= 25 V, f = 1 MHz, V
GS
= 0 V
Min.
-
-
-
Typ.
939
102
13.2
Max.
-
-
-
Unit pF
R g
Equivalent output capacitance
Gate input resistance
V
DS
= 0 to 1200 V, V
GS
= 0 V f = 1 MHz, gate DC Bias = 0, test signal level = 20 mV, I
D
= 0 A
-
100
4 -
pF
Ω
Q g
Q gs
Q gd
Total gate charge
Gate-source charge
Gate-drain charge
V
DD
= 1200 V, I
(see
D
= 2.5 A, V
GS
= 0 to 10 V
Figure 18. Test circuit for gate charge behavior )
-
-
-
29.3
4.6
17
-
-
nC
1. C oss eq.
is defined as a constant equivalent capacitance giving the same charging time as C oss
when V
DS
increases from 0 to 80% V
DSS
.
Symbol t d(on) t r t d(off) t f
Parameter
Turn-on delay time
Rise time
Turn-off delay time
Fall time
Table 6. Switching times
Test conditions
V
DD
= 750 V, I
D
= 1.25 A,
R
G
= 4.7 Ω, V
GS
= 10 V
(see
Figure 17. Test circuit for resistive load switching times
and
Figure 22. Switching time waveform )
Min.
Typ.
Max.
Unit
-
24
47
-
ns
-
45
61 -
-
DS5052 - Rev 12 page 3/22
STFW3N150, STH3N150-2, STP3N150, STW3N150
Electrical characteristics
Table 7. Source-drain diode
Symbol
I
SD
I
SDM
(1)
V
I
I
SD
(2)
t
Q
RRM t
Q rr rr rr rr
RRM
Parameter
Source-drain current
Source-drain current (pulsed)
Forward on voltage
Reverse recovery time
Reverse recovery charge
Reverse recovery current
Reverse recovery time
Reverse recovery charge
Reverse recovery current
Test conditions
V
GS
= 0 V, I
SD
= 2.5 A
I
SD
= 2.5 A, di/dt = 100 A/µs,
V
DD
= 60 V
(see
Figure 19. Test circuit for inductive load switching and diode recovery times )
I
SD
= 2.5 A, di/dt = 100 A/µs,
V
DD
= 60 V, T
J
= 150 °C
(see
Figure 19. Test circuit for inductive load switching and diode recovery times )
1. Pulse width is limited by safe operating area.
2. Pulse test: pulse duration = 300 µs, duty cycle 1.5%.
-
-
-
-
-
-
-
Min.
Typ.
Max.
Unit
2.5
A
10 A
1.6
410
2.4
V ns
µC
11.7
540
3.3
12.3
A ns
µC
A
DS5052 - Rev 12 page 4/22
STFW3N150, STH3N150-2, STP3N150, STW3N150
Electrical characteristics (curves)
2.1
Electrical characteristics (curves)
Figure 1. Safe operating area for TO-3PF
I
D
(A)
AM03941v1
10
1
0.1
0.01
0.1
O pe ra
Li m tio n in d by m ite
th is
a re ax
R a is
DS
(o n)
Tj=150°C
Tc=25°C
S inlge puls e
1 10 100 1000
10µs
100µs
1ms
10ms
V
DS
(V)
Figure 2. Thermal impedance for TO-3PF
K ZTH_TO3PF
10 -1
Z th
=k*R thj-c
10 -2
10 -5 10 -4 10 -3 10 -2 10 -1 10 0 t p
(s)
Figure 3. Safe operating area for H 2 PAK-2 and TO-220
HV37430
Figure 4. Thermal impedance for H 2 PAK-2 and TO-220
GC20540
Figure 5. Safe operating area for TO-247
HV37440
Figure 6. Thermal impedance for TO-247
GC20530
DS5052 - Rev 12 page 5/22
Figure 7. Output characteristics
HV37460
STFW3N150, STH3N150-2, STP3N150, STW3N150
Electrical characteristics (curves)
Figure 8. Transfer characteristics
HV37465
Figure 9. Normalized V
(BR)DSS
vs temperature
HV37470
Figure 10. Static drain-source on-resistance
HV37480
Figure 11. Gate charge vs gate-source voltage
HV37490
Figure 12. Capacitance variations
HV37500
DS5052 - Rev 12 page 6/22
Figure 13. Normalized gate threshold voltage vs temperature
HV37510
STFW3N150, STH3N150-2, STP3N150, STW3N150
Electrical characteristics (curves)
Figure 14. Normalized on resistance vs temperature
HV37520
Figure 15. Source-drain diode forward characteristics
HV37540
Figure 16. Maximum avalanche energy vs T
J
HV37530
DS5052 - Rev 12 page 7/22
STFW3N150, STH3N150-2, STP3N150, STW3N150
Test circuits
3
Test circuits
Figure 17. Test circuit for resistive load switching times
V
GS pulse width
V
D
R
G
R
L
+
2200
μF
3.3
μF
D.U.T.
V
DD
AM01468v1
Figure 19. Test circuit for inductive load switching and diode recovery times
Figure 18. Test circuit for gate charge behavior
12 V
V
GS pulse width
2200
μF
+
I
G
= CONST
2.7 kΩ
47 kΩ
1 kΩ
47 kΩ
100 nF
100 Ω
V
DD
1 kΩ
D.U.T.
V
G
AM01469v1
Figure 20. Unclamped inductive load test circuit
G
25 Ω
D
A
D.U.T.
S
B
+
_
R
G
A A fast diode
B
B
G
100 µH
D
D.U.T.
S
3.3
µF +
1000
µF
V
DD
AM01470v1
Figure 21. Unclamped inductive waveform
V (BR)DSS
V D
I DM
I D
V DD V
DD
AM01472v1
V i pulse width
V
D
L
I
D
+
2200
µF
3.3
µF
V
DD
D.U.T.
AM01471v1
0
Figure 22. Switching time waveform t d(on) t on t r t d(off) t off t f
90% 90%
10%
V
GS
V
DS
90%
10%
0 10%
AM01473v1
DS5052 - Rev 12 page 8/22
4
4.1
STFW3N150, STH3N150-2, STP3N150, STW3N150
Package information
Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com
. ECOPACK is an ST trademark.
TO-220 type A package information
Figure 23. TO-220 type A package outline
DS5052 - Rev 12
0015988_typeA_Rev_23 page 9/22
DS5052 - Rev 12
Dim.
e1
F
H1
E e
J1
L b1 c
A b
D
D1
L1
L20
L30
øP
Q
Slug flatness
STFW3N150, STH3N150-2, STP3N150, STW3N150
TO-220 type A package information
Table 8. TO-220 type A package mechanical data mm
Typ.
Min.
4.40
0.61
1.14
0.48
15.25
1.27
10.00
2.40
4.95
1.23
6.20
2.40
13.00
3.50
16.40
28.90
3.75
2.65
0.03
3.85
2.95
0.10
10.40
2.70
5.15
1.32
6.60
2.72
14.00
3.93
Max.
4.60
0.88
1.55
0.70
15.75
page 10/22
4.2
STFW3N150, STH3N150-2, STP3N150, STW3N150
H²PAK-2 package information
H²PAK-2 package information
Figure 24. H²PAK-2 package outline
DS5052 - Rev 12
8159712_9 page 11/22
Dim.
F
F2
H
H1
J1
L
L1
A
A1
C
D e
E
M
R
V
L2
L3
L4
STFW3N150, STH3N150-2, STP3N150, STW3N150
H²PAK-2 package information
Table 9. H²PAK-2 package mechanical data mm
Typ.
4.93
6.85
1.50
2.60
0.20
0°
10.00
7.40
2.49
15.30
1.27
8.95
4.98
0.50
0.78
1.14
Min.
4.30
0.03
1.17
-
Figure 25. H²PAK-2 recommended footprint
5.23
7.25
1.70
2.90
0.60
8°
10.40
7.80
2.69
15.80
1.40
9.35
5.18
0.90
0.85
1.70
Max.
4.70
0.20
1.37
Note: Dimensions are in mm.
DS5052 - Rev 12
8159712_9 page 12/22
4.3
STFW3N150, STH3N150-2, STP3N150, STW3N150
TO-247 package information
TO-247 package information
Figure 26. TO-247 package outline
DS5052 - Rev 12
0075325_9 page 13/22
Dim.
e
L
L1
D
E
A
A1 b b1 b2 c
L2
ØP
ØR
S
STFW3N150, STH3N150-2, STP3N150, STW3N150
TO-247 package information
Table 10. TO-247 package mechanical data mm
Typ.
Min.
4.85
2.20
1.0
2.0
3.0
0.40
19.85
15.45
5.30
14.20
3.70
5.45
18.50
3.55
4.50
5.30
5.50
Max.
5.15
2.60
1.40
2.40
3.40
0.80
20.15
15.75
5.60
14.80
4.30
3.65
5.50
5.70
DS5052 - Rev 12 page 14/22
4.4
STFW3N150, STH3N150-2, STP3N150, STW3N150
TO-3PF package information
TO-3PF package information
Figure 27. TO-3PF package outline
DS5052 - Rev 12
7627132_6 page 15/22
DS5052 - Rev 12
Dim.
F2
G
G1
H
L
L2
L3
D
D1
E
F
A
C
L7
N
R
Dia
L4
L5
L6
STFW3N150, STH3N150-2, STP3N150, STW3N150
TO-3PF package information
15.30
9.80
22.80
26.30
43.20
4.30
24.30
14.60
1.80
3.80
3.40
Table 11. TO-3PF mechanical data mm
Typ.
Min.
5.30
2.80
3.10
1.80
0.80
0.65
1.80
10.30
5.45
10.00
15.70
10.20
23.20
26.70
44.40
4.70
24.70
15.00
2.20
4.20
3.80
Max.
5.70
3.20
3.50
2.20
1.10
0.95
2.20
11.50
page 16/22
STFW3N150, STH3N150-2, STP3N150, STW3N150
Packing information
4.5
Packing information
T
Top cover tape
K0
B0
Figure 28. Tape outline
10 pitches cumulative tolerance on tape +/- 0.2 mm
P0 D P2
A0 P1
User direction of feed
D1
F
E
W
User direction of feed
R
Bending radius
AM08852v2
DS5052 - Rev 12 page 17/22
DS5052 - Rev 12
STFW3N150, STH3N150-2, STP3N150, STW3N150
Packing information
A
REEL DIMENSIONS
D
Figure 29. Reel outline
40 mm min.
Access hole
At slot location
B
C
Full radius
Tape slot
In core for
Tape start
T
N
G measured
At hub
Dim.
K0
P0
P1
E
F
A0
B0
D
D1
P2
R
T
W
4.8
3.9
11.9
1.9
50
0.25
23.7
Min.
10.5
15.7
1.5
1.59
1.65
11.4
Tape
Max.
10.7
15.9
1.6
1.61
1.85
11.6
5.0
4.1
12.1
2.1
Table 12. Tape and reel mechanical data
Reel mm
Dim.
G
N
T
A
B
C
D
Min.
Base quantity
Bulk quantity
1.5
12.8
20.2
24.4
100
0.35
24.3
mm
Max.
330
13.2
26.4
30.4
1000
1000 page 18/22
5
STFW3N150, STH3N150-2, STP3N150, STW3N150
Ordering information
Ordering information
Order codes
STFW3N150
STH3N150-2
STP3N150
STW3N150
Marking
3N150
H3N150
P3N150
3N150
Table 13. Order codes
Package
TO-3PF
H 2 PAK-2
TO-220
TO-247
Packing
Tube
Tape and reel
Tube
DS5052 - Rev 12 page 19/22
STFW3N150, STH3N150-2, STP3N150, STW3N150
Revision history
Date
12-Jan-2007
17-Apr-2007
14-May-2007
29-Aug-2007
09-Apr-2008
13-Feb-2009
01-Dec-2009
10-Dec-2009
29-Jun-2010
08-Feb-2013
18-Feb-2014
12-May-2020
Revision
1
2
3
4
5
6
7
8
9
10
11
12
Table 14. Document revision history
Changes
First release
Added new value on Table 6 .
The document has been reformatted
RDS(on) value changed, updated Figure 15
Added new package: TO-3PF
Added PTOT value for TO-3PF ( Table 2: Absolute maximum ratings )
– Document status promoted from preliminary data to datasheet
– Removed TO-220FH package and mechanical data
Corrected VISO value in Table 2: Absolute maximum ratings
Corrected unit in Table 3 .
– Minor text changes
– Modified: Table 3
– Changed: Figure 1
– Added: H 2 PAK-2 package
– Modified: Figure 1
– Updated: Figure 18 , 19 , 20 and 21
– Updated: Figure 27 and Table 11
– Updated: Section 4: Package mechanical data
– Minor text changes
Updated Section 5 Ordering information .
Minor text changes.
DS5052 - Rev 12 page 20/22
STFW3N150, STH3N150-2, STP3N150, STW3N150
Contents
Contents
1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2 Electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
2.1
Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
4 Package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
4.1
TO-220 type A package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.2
H²PAK-2 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.3
TO-247 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4.4
TO-3PF package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
4.5
Packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
5 Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
DS5052 - Rev 12 page 21/22
STFW3N150, STH3N150-2, STP3N150, STW3N150
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of
Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. For additional information about ST trademarks, please refer to www.st.com/trademarks . All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2020 STMicroelectronics – All rights reserved
DS5052 - Rev 12 page 22/22
