STD60NF55L
STD60NF55L-1
N-channel 55V - 0.012
Ω
- 60A - DPAK/IPAK
STripFET™ II Power MOSFET
General features
Type
STD60NF55L-1
STD60NF55L
V
DSS
55V
55V
■ Low threshold drive
R
DS(on)
<0.015
Ω
<0.015
Ω
I
D
60A
60A
Description
This MOSFET is the latest development of
STMicroelectronics unique “Single Feature
Size™” strip-based process. The resulting transistor shows extremely high packing density for low on-resistance, rugged avalance characteristics and less critical alignment steps therefore a remarkable manufacturing reproducibility.
Applications
■ Switching application
DPAK
1
3
IPAK
Internal schematic diagram
1
2
3
Order codes
Part number
STD60NF55LT4
STD60NF55L-1
Marking
D60NF55L
D60NF55L
Package
DPAK
IPAK
Packaging
Tape & reel
Tube
July 2006 Rev 6 1/14 www.st.com
14
5
6
3
4
1
2
Contents
Contents
STD60NF55L - STD60NF55L-1
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Packing mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2/14
STD60NF55L - STD60NF55L-1 Electrical ratings
Table 1.
Symbol
Absolute maximum ratings
Parameter
V
DS
V
GS
I
D
I
D
I
DM
(1)
P tot
Drain-source voltage (V
Gate- source voltage
GS
= 0)
Drain current (continuous) at T
Drain current (continuous) at T
Drain current (pulsed)
C
C
= 25°C
= 100°C
Total dissipation at T
C
= 25°C
Derating Factor dv/dt
(2)
E
AS
(3)
T stg
T j
Peak diode recovery voltage slop
Single pulse avalanche energy
Storage temperature
Max. operating junction temperature
1.
Pulse width limited by safe operating area.
2.
I
SD
≤
40A, di/dt
≤
350A/µs, V
DD
≤
BR)DSS
, Tj
≤
JMAX
.
3.
Starting T j
= 25 o
C, I
D
= 17.5A, V
DD
=24V e
Table 2.
Thermal data
Rthj-case Thermal resistance junction-case max
Rthj-amb Thermal resistance junction-to ambient max
T
J
Maximum lead temperature for soldering purpose
Value
55
± 15
60
42
240
110
0.73
16
400
-55 to 175
1.36
62.5
275
Unit
V
V
A
A
A
W
W/°C
V/ns mJ
°C
°C/W
°C/W
°C
3/14
Electrical characteristics STD60NF55L - STD60NF55L-1
(T
CASE
=25°C unless otherwise specified)
Table 3.
Symbol
On/off states
Parameter
V
(BR)DSS
Drain-source breakdown voltage
V
I
I
DSS
GSS
GS(th)
R
DS(on)
Zero gate voltage drain current (V
GS
= 0)
Gate-body leakage current (V
DS
= 0)
Gate threshold voltage
Static drain-source on resistance
Test conditions
I
D
= 250µA, V
GS
=0
V
DS
= Max rating
V
DS
= Max rating,
T
C
= 125°C
V
GS
= ± 15V
V
DS
= V
GS
, I
D
= 250µA
V
GS
= 10V, I
D
= 30A
V
GS
= 4.5V, I
D
= 30A
Min.
55
1
Typ.
Max.
Unit
V
1
10
±100
0.012
0.014
2
0.015
0.017
µA
µA nA
V
Ω
Ω
Table 4.
Symbol
Dynamic
Parameter Test conditions g fs
C
C
C
(1) iss oss rss
Forward transconductance
Input capacitance
Output capacitance
Reverse transfer capacitance
V
V
V
DS
DS
GS
= 10V, I
= 25V, f = 1MHz,
= 0
D
= 30A t d(on) t r t d(off) t f
Q g
Q gs
Q gd
Turn-on delay time
Rise time
Turn-off delay time
Fall time
Total gate charge
Gate-source charge
Gate-drain charge
V
DD
R
G
(see
V
DD
V
GS
= 25V, I
D
= 4.7
Ω V
GS
= 4.5V
Figure 12
= 40V, I
D
= 5V, R
(see
1.
Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %.
G
= 30A
= 60A,
Figure 13
= 4.7
Ω
)
)
Min.
Typ.
Max.
Unit
35 S
1950
390
130
30
180
80
35
40
10
20
56 pF pF pF ns ns ns ns nC nC nC
4/14
STD60NF55L - STD60NF55L-1 Electrical characteristics
Table 5.
Symbol
Source drain diode
Parameter Test conditions
I
SD
I
SDM
(1)
Source-drain current
Source-drain current
(pulsed)
V
SD
(2) t rr
Q rr
I
RRM
Forward on voltage
Reverse recovery time
Reverse recovery charge
Reverse recovery current
I
SD
= 60A, V
GS
= 0
I
SD
= 40A, di/dt = 100A/µs,
V
DD
= 25V, T j
= 150°C
(see
Figure 14 )
1.
Pulse width limited by safe operating area.
2.
Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %
Min.
Typ.
Max.
Unit
65
130
4
60
240
1.3
A
A
V ns nC
A
5/14
Electrical characteristics
Figure 1.
Safe operating area
STD60NF55L - STD60NF55L-1
Figure 2.
Thermal impedance
Figure 3.
Output characterisics Figure 4.
Transfer characteristics
Figure 5.
Transconductance Figure 6.
Static drain-source on resistance
6/14
STD60NF55L - STD60NF55L-1 Electrical characteristics
Figure 7.
Gate charge vs gate-source voltage Figure 8.
Capacitance variations
Figure 9.
Normalized gate threshold voltage vs temperature
Figure 10. Normalized on resistance vs temperature
Figure 11. Source-drain diode forward characteristics
7/14
Test circuit
3 Test circuit
Figure 12. Switching times test circuit for resistive load
STD60NF55L - STD60NF55L-1
Figure 13. Gate charge test circuit
Figure 14. Test circuit for inductive load switching and diode recovery times
Figure 15. Unclamped Inductive load test circuit
Figure 16. Unclamped inductive waveform Figure 17. Switching time waveform
8/14
STD60NF55L - STD60NF55L-1
4 Package mechanical data
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com
9/14
Package mechanical data STD60NF55L - STD60NF55L-1
DIM.
D1
E
E1 e e1
H b4
C
C2
D
A
A1
A2
B
L
(L1)
L2
L4
R
V2
4.4
9.35
1
0.6
0°
MIN.
2.2
0.9
0.03
0.64
5.2
0.45
0.48
6
6.4
DPAK MECHANICAL DATA
mm.
TYP
5.1
4.7
2.28
MAX.
2.4
1.1
0.23
0.9
5.4
0.6
0.6
6.2
6.6
MIN.
0.086
0.035
0.001
0.025
0.204
0.017
0.019
0.236
0.252
4.6
10.1
0.173
0.368
0.039
2.8
0.8
0.2
1
8°
0.023
0° inch
TYP.
0.200
0.185
0.090
0.110
0.031
0.008
MAX.
0.094
0.043
0.009
0.035
0.212
0.023
0.023
0.244
0.260
0.181
0.397
0.039
8°
0068772-F
10/14
STD60NF55L - STD60NF55L-1 Package mechanical data
DIM.
G
H
L
L1
L2
C
C2
D
E
B2
B3
B5
B6
A
A1
A3
B
0.45
0.48
6
6.4
4.4
15.9
9
0.8
MIN.
2.2
0.9
0.7
0.64
5.2
TO-251 (IPAK) MECHANICAL DATA
mm
TYP.
0.3
0.8
0.95
0.6
0.6
6.2
6.6
4.6
16.3
9.4
1.2
1
MAX.
2.4
MIN.
0.086
1.1
0.035
1.3 0.027
0.9
5.4
0.85
0.025
0.204
0.017
0.019
0.236
0.252
0.173
0.626
0.354
0.031
inch
TYP.
0.012
0.031
H
0.037
0.023
0.023
0.244
0.260
0.181
0.641
0.370
0.047
0.039
MAX.
0.094
0.043
0.051
0.031
0.212
0.033
L2 D
L
L1
0068771-E
11/14
Packing mechanical data
5 Packing mechanical data
DPAK FOOTPRINT
STD60NF55L - STD60NF55L-1
12/14
All dimensions are in millimeters
TAPE MECHANICAL DATA mm inch
DIM.
MIN.
MAX.
MIN.
MAX.
D1
E
F
K0
A0
B0
B1
D
P0
P1
P2
R
W
6.8
7 0.267 0.275
10.4
10.6
0.409 0.417
1.5
1.5
12.1
1.6
0.476
0.059 0.063
0.059
1.65
1.85
0.065 0.073
7.4
7.6
0.291 0.299
2.55
2.75
0.100 0.108
3.9
7.9
4.1
8.1
0.153 0.161
0.311
0.319
1.9
40
2.1
0.075 0.082
1.574
15.7
16.3
0.618
0.641
TAPE AND REEL SHIPMENT
G
N
T
A
B
C
D
REEL MECHANICAL DATA mm inch
DIM.
MIN.
MAX.
MIN.
MAX.
330 12.992
1.5
0.059
12.8
13.2
0.504
0.520
20.2
0.795
16.4
18.4
0.645
0.724
50 1.968
22.4
0.881
BASE QTY
2500
BULK QTY
2500
STD60NF55L - STD60NF55L-1 Revision history
Table 6.
Date
Revision history
Revision
14-Mar-2005
18-May-2005
18-Nov-2005
19-Jul-2006
3
4
5
6
Changes
Preliminary version
New package inserted: IPAK
Changed value in
Table 4 (Rise Time from 18 to 180ns)
New template, no content change
13/14
STD60NF55L - STD60NF55L-1
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2006 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
14/14
