2STA1695
High power PNP epitaxial planar bipolar transistor
Features
■
■
■
■
High breakdown voltage V
CEO
= -140 V
Complementary to 2STC4468
Typical f t
= 20 MHz
Fully characterized at 125 °C
Applications
■ Audio power amplifier
Description
This device is an PNP transistor manufactured using BiT-LA (Bipolar transistor for linear amplifier) technology. The resulting transistor exhibits good gain linearity behavior. Recommended for 70 W to
100 W high fidelity audio frequency amplifier output stages.
TO-3P
1
2
3
Figure 1.
Internal schematic diagram
Table 1.
Device summary
Order code
2STA1695
Marking
2STA1695
Package
TO-3P
Packaging
Tube
February 2012 Doc ID 13599 Rev 3 1/10 www.st.com
10
Electrical ratings 2STA1695
Table 2.
Symbol
Absolute maximum ratings
Parameter
V
CBO
V
CEO
V
EBO
I
C
I
CM
P tot
T stg
T
J
Collector-base voltage (I
E
= 0)
Collector-emitter voltage (I
B
= 0)
Emitter-base voltage (I
C
= 0)
Collector current
Collector peak current (t
P
< 5 ms)
Total dissipation at T c
= 25 °C
Storage temperature
Max. operating junction temperature
Table 3.
Symbol
R thj-case
R thj-amb
Thermal data
Parameter
Thermal resistance junction-case max
Thermal resistance junction-ambient max
Value
-140
-140
-6
-10
-20
100
-65 to 150
150
Value
1.25
35.7
Unit
V
V
V
A
A
W
°C
°C
Unit
°C/W
°C/W
2/10 Doc ID 13599 Rev 3
2STA1695 Electrical characteristics
(T
case
= 25
°C
;
unless otherwise specified)
Table 4.
Symbol
Electrical characteristics
Parameter Test conditions Min.
Typ.
Max.
Unit
V
V
I
I
CBO
EBO
(BR)CEO
(BR)CBO
Collector cut-off current
(I
E
= 0)
Emitter cut-off current
V
CB
= -140 V
V
EB
= -6 V
(I
C
= 0)
Collector-emitter breakdown voltage (I
B
= 0)
I
C
= -50 mA
Collector-base breakdown voltage (I
E
= 0)
I
C
= -100 µA
V
(BR)EBO
(1)
Emitter-base breakdown voltage (I
C
= 0)
I
E
= -1 mA
V
CE(sat)
(1)
V
BE
(1)
Collector-emitter saturation voltage
Base-emitter voltage
I
C
= -5 A I
B
= -500 mA
I
C
= -7 A I
B
= -700 mA
V
CE
= -5 V I
C
= -5 A h f
FE
T
DC current gain
Transition frequency
I
C
= -3 A V
CE
= -4 V
I
C
= -5 A V
CE
= -4 V
I
C
= -0.5 A V
CE
= -12 V
C
CBO
Collector-base capacitance
(I
E
= 0)
Resistive load
V
CB
= -10 V f = 1 MHz t on t stg t f
Turn-on time
Storage time
Fall time
I
I
C
= -5 A V
B1
= -I
B2
1.
Pulsed: Pulse duration = 300 µs, duty cycle
≤
1.5 %
CC
= -0.5 A
= -60 V
-140
-140
-6
70
50
20
225
0.24
1.2
0.24
-0.1
-0.1
-0.5
-0.7
-1.3
140
µA
µA
V
V
V
V
V
V
MHz pF
µs
µs
µs
Doc ID 13599 Rev 3 3/10
Electrical characteristics 2STA1695
characteristics
Figure 2.
Safe operating area Figure 3.
Power derating versus temperature
0OWERDERATINGVERSUSTEMPERATURE
0
4/4
7
7ITHINFINITEHEATSINK
Figure 4.
Output characteristics
7ITHOUTHEATSINK
4
O
#
!-V
Figure 5.
DC current gain
Figure 6.
Collector-emitter saturation voltage Figure 7.
Base-emitter voltage
4/10 Doc ID 13599 Rev 3
2STA1695
Figure 8.
Base-emitter voltage
Electrical characteristics
Figure 9.
Resistive load switching test circuit
1) Fast electronic switch
2) Non-inductive resistor
Doc ID 13599 Rev 3 5/10
Package mechanical data
3 Package mechanical data
2STA1695
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK
®
packages, depending on their level of environmental compliance. ECOPACK
® specifications, grade definitions and product status are available at: www.st.com
.
ECOPACK
®
is an ST trademark.
6/10 Doc ID 13599 Rev 3
2STA1695 Package mechanical data
Table 5.
TO-3P mechanical data mm
Dim.
Min. Typ. Max
A 4.60 5
A1 1.45 1.50 1.65
A2 1.20 1.40 1.60
b 0.80 1 1.20
b1 1.80 b2 2.80
2.20
3.20
c 0.55 0.60 0.75
D 19.70 19.90 20.10
D1 13.90
E 15.40 15.80
E1 13.60
E2 9.60 e 5.15 5.45 5.75
L 19.50 20 20.50
L1 3.50
L2 18.20 18.40 18.60
øP 3.10 3.30
Q 5
Q1 3.80
Doc ID 13599 Rev 3 7/10
Package mechanical data
Figure 10.
TO-3P package dimensions
2STA1695
8/10 Doc ID 13599 Rev 3
8045950_A
2STA1695 Revision history
Table 6.
Date
Document revision history
18-May-2007
06-Nov-2008
07-Feb-2012
Revision
1
2
3
Changes
Initial release
Document status promoted from preliminary data to datasheet.
–
Figure 3 inserted
– Mechanical data updated
Doc ID 13599 Rev 3 9/10
2STA1695
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2012 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
10/10 Doc ID 13599 Rev 3
