STB35N60DM2
N-channel 600 V, 0.094
Ω typ., 28 A MDmesh™ DM2
Power MOSFET in a D²PAK package
Datasheet - production data
TAB
1
3
D2PAK
Features
Order code V
DS
R
DS(on) max.
I
D
P
TOT
STB35N60DM2 600 V 0.110
Ω
28 A 210 W
Fast-recovery body diode
Extremely low gate charge and input capacitance
Low on-resistance
100% avalanche tested
Extremely high dv/dt ruggedness
Zener-protected
Figure 1: Internal schematic diagram
Order code
STB35N60DM2
Applications
Switching applications
Description
This high voltage N-channel Power MOSFET is part of the MDmesh™ DM2 fast recovery diode series. It offers very low recovery charge (Q rr
) and time (t rr
) combined with low R
DS(on)
, rendering it suitable for the most demanding high efficiency converters and ideal for bridge topologies and
ZVS phase-shift converters.
Table 1: Device summary
Marking Package Packing
35N60DM2 D²PAK Tape and reel
September 2015 DocID028331 Rev 1
This is information on a product in full production.
1/15 www.st.com
Contents
Contents
STB35N60DM2
1 Electrical ratings ............................................................................. 3
2 Electrical characteristics ................................................................ 4
2.1
Electrical characteristics (curves) ...................................................... 6
3 Test circuits ..................................................................................... 8
4 Package information ....................................................................... 9
4.1
4.2
D²PAK (TO-263) type A package information ................................... 9
D²PAK packing information ............................................................. 12
5 Revision history ............................................................................ 14
2/15 DocID028331 Rev 1
STB35N60DM2
1 Electrical ratings
Symbol
V
GS
I
D
I
DM
(1)
P
TOT
dv/dt
(2) dv/dt
(3)
T stg
T j
Table 2: Absolute maximum ratings
Parameter
Gate-source voltage
Drain current (continuous) at T case
= 25 °C
Drain current (continuous) at T case
= 100 °C
Drain current (pulsed)
Total dissipation at T case
= 25 °C
Peak diode recovery voltage slope
MOSFET dv/dt ruggedness
Storage temperature
Operating junction temperature
Notes:
(1)
Pulse width is limited by safe operating area.
(2)
I
SD
≤ 28 A, di/dt=900 A/μs; V
DS
peak < V
(BR)DSS
,V
DD
= 400.
(3)
V
DS
≤ 480 V.
Symbol
Table 3: Thermal data
Parameter
R thj-case
R
thj-pcb
(1)
Thermal resistance junction-case
Thermal resistance junction-pcb
Notes:
(1)
When mounted on a 1-inch² FR-4, 2 Oz copper board.
Symbol
Table 4: Avalanche characteristics
Parameter
I
AR
E
AS
(1)
Avalanche current, repetitive or not repetitive
Single pulse avalanche energy
Notes:
(1)
starting T j
= 25 °C, I
D
= I
AR
, V
DD
= 50 V.
Electrical ratings
Value
±25
28
17
112
210
50
50
-55 to 150
Unit
V
A
A
W
V/ns
°C
Value
0.6
30
Unit
°C/W
Value
6
650
Unit
A mJ
DocID028331 Rev 1 3/15
Electrical characteristics
2 Electrical characteristics
STB35N60DM2
(T case
= 25 °C unless otherwise specified)
Symbol Parameter
Table 5: Static
Test conditions
V
(BR)DSS
Drain-source breakdown voltage
V
GS
= 0 V, I
D
= 1 mA
I
DSS
Zero gate voltage drain current
V
GS
= 0 V, V
DS
= 600 V
V
GS
= 0 V, V
DS
= 600 V,
T case
= 125 °C
I
GSS
Gate-body leakage current
V
GS(th)
Gate threshold voltage
R
DS(on)
Static drain-source onresistance
V
DS
= 0 V, V
GS
= ±25 V
V
DS
= V
GS
, I
D
= 250 µA
V
GS
= 10 V, I
D
= 14 A
Symbol
Table 6: Dynamic
Test conditions
C iss
C oss
C rss
C
oss eq.
(1)
R
G
Q g
Q gs
Q gd
Parameter
Input capacitance
Output capacitance
Reverse transfer capacitance
Equivalent output capacitance
Intrinsic gate resistance
Total gate charge
Gate-source charge
Gate-drain charge
V
DS
= 100 V, f = 1 MHz, V
GS
= 0 V
V
DS
= 0 to 480 V, V
GS
= 0 V f = 1 MHz, I
D
= 0 A
V
DD
= 480 V, I
D
= 28 A, V
GS
= 10 V (see
Figure 15: "Test circuit for gate charge behavior" )
Min. Typ. Max. Unit
600
3
-
-
4
14.6
24.2
10
100
±5
5
-
-
V
µA
µA
V
0.094 0.11
Ω
Min. Typ. Max. Unit
-
-
-
-
-
-
2400
110
2.8
190
4.3
54
-
-
-
-
-
- pF pF
Ω nC
Notes:
(1)
C oss eq.
is defined as a constant equivalent capacitance giving the same charging time as C oss
when V
DS increases from 0 to 80% V
DSS
.
4/15 DocID028331 Rev 1
STB35N60DM2
Symbol Parameter t t d(on) t r d(off) t f
Turn-on delay time
Rise time
Turn-off delay time
Fall time
Table 7: Switching times
Test conditions
V
DD
= 300 V, I
D
= 14 A R
G
= 4.7 Ω,
V
GS
= 10 V (see Figure 14: "Test circuit for resistive load switching times" and Figure 19:
"Switching time waveform" )
Electrical characteristics
Min. Typ. Max. Unit
-
-
-
-
21.2
17
68
10.7
-
-
-
- ns
Table 8: Source-drain diode
Test conditions Min. Typ. Max. Unit Symbol Parameter
I
I
SD
SDM
V
I
I
SD
t
Q
RRM t
Q rr rr rr rr
RRM
(1)
(2)
Source-drain current
Source-drain current
(pulsed)
Forward on voltage
Reverse recovery time
Reverse recovery charge
Reverse recovery current
Reverse recovery time
Reverse recovery charge
Reverse recovery current
V
GS
= 0 V, I
SD
= 28 A
I
SD
= 28 A, di/dt = 100 A/µs, V
DD
= 60 V
(see Figure 16: "Test circuit for inductive load switching and diode recovery times" )
I
SD
= 28 A, di/dt = 100 A/µs, V
DD
= 60 V,
T j
= 150 °C (see Figure 16: "Test circuit for inductive load switching and diode recovery times" )
-
-
-
-
-
-
-
-
-
120
572
10.2
215
1.89
17.7
28
112
1.6
A
A
V ns nC
A ns
µC
A
Notes:
(1)
Pulse width is limited by safe operating area.
(2)
Pulse test: pulse duration = 300 µs, duty cycle 1.5%.
Symbol
Table 9: Gate-source Zener diode
Parameter Test conditions Min. Typ. Max. Unit
V
(BR)GSO
Gate-source breakdown voltage I
GS
= ±250 µA, I
D
= 0 A ±30 - - V
The built-in back-to-back Zener diodes are specifically designed to enhance the ESD performance of the device. The Zener voltage facilitates efficient and cost-effective device integrity protection, thus eliminating the need for additional external componentry.
DocID028331 Rev 1 5/15
Electrical characteristics
2.1 Electrical characteristics (curves)
Figure 2: Safe operating area
STB35N60DM2
Figure 3: Thermal impedance
K
δ=0.5
0.2
0.1
10 -1
0.05
0.02
Zth= K*Rthj-c
δ= tp/ Ƭ
0.01
Single pulse
10 -2
10 -5 10 -4 10 -3 10 -2 tp
Ƭ
10 -1 t
P
(s)
Figure 4: Output characteristics Figure 5: Transfer characteristics
6/15
Figure 6: Gate charge vs gate-source voltage Figure 7: Static drain-source on-resistance
DocID028331 Rev 1
STB35N60DM2
Figure 8: Capacitance variations
Electrical characteristics
Figure 9: Normalized gate threshold voltage vs temperature
Figure 10: Normalized on-resistance vs temperature
Figure 11: Normalized V(BR)DSS vs temperature
Figure 12: Output capacitance stored energy
Figure 13: Source-drain diode forward characteristics
DocID028331 Rev 1 7/15
Test circuits
3 Test circuits
Figure 14: Test circuit for resistive load switching times
STB35N60DM2
Figure 15: Test circuit for gate charge behavior
8/15
Figure 16: Test circuit for inductive load switching and diode recovery times
Figure 17: Unclamped inductive load test circuit
Figure 18: Unclamped inductive waveform
Figure 19: Switching time waveform
DocID028331 Rev 1
STB35N60DM2
4
4.1
Package information
Package information
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK
®
packages, depending on their level of environmental compliance. ECOPACK
® specifications, grade definitions and product status are available at: www.st.com
.
ECOPACK
®
is an ST trademark.
D²PAK (TO-263) type A package information
Figure 20: D²PAK (TO-263) type A package outline
DocID028331 Rev 1
0079457_A_rev22
9/15
Package information
Dim.
D2
E
E1
E2 e e1
H c c2
D
D1
A
A1 b b2
J1
L
L1
L2
R
V2
Table 10: D²PAK (TO-263) type A package mechanical data mm
Min. Typ.
STB35N60DM2
Max.
4.88
15
2.49
2.29
1.27
1.30
4.40
0.03
0.70
1.14
0.45
1.23
8.95
7.50
1.10
10
8.50
6.85
0.4
7.75
1.30
8.70
7.05
2.54
5.28
15.85
2.69
2.79
1.40
1.75
4.60
0.23
0.93
1.70
0.60
1.36
9.35
8.00
1.50
10.40
8.90
7.25
0° 8°
10/15 DocID028331 Rev 1
STB35N60DM2 Package information
Figure 21: D²PAK (TO-263) recommended footprint (dimensions are in mm)
DocID028331 Rev 1 11/15
Package information
4.2 D²PAK packing information
Figure 22: Tape
STB35N60DM2
12/15 DocID028331 Rev 1
STB35N60DM2
Figure 23: Reel
Package information
Dim.
K0
P0
P1
P2
R
T
W
A0
B0
D
D1
E
F
Table 11: D²PAK tape and reel mechanical data
Tape Reel mm
Dim.
Min.
4.8
3.9
11.9
1.9
50
0.25
23.7
10.5
15.7
1.5
1.59
1.65
11.4
Max.
10.7
15.9
1.6
1.61
1.85
11.6
5.0
4.1
12.1
2.1
0.35
24.3
A
B
C
D
G
N
T
Base qty
Bulk qty
Min.
1.5
12.8
20.2
24.4
100 mm
Max.
330
13.2
26.4
30.4
1000
1000
DocID028331 Rev 1 13/15
Revision history
5
STB35N60DM2
Revision history
Date
08-Sep-2015
Table 12: Document revision history
Revision
1
Changes
Initial version
14/15 DocID028331 Rev 1
STB35N60DM2
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2015 STMicroelectronics
– All rights reserved
DocID028331 Rev 1 15/15
