MC4558
Wide bandwidth dual bipolar operational amplifier
Datasheet
−
production data
Features
■
■
■
■
■
■
Internally compensated
Short-circuit protection
Gain and phase match between amplifier
Low power consumption
Pin-to-pin compatible with MC1458/LM358
Gain bandwidth (at 100 kHz): 5.5 MHz
Description
The MC4558 is a high performance monolithic dual operational amplifier.
The circuit combines all of the outstanding features of the MC1458, and in addition possesses three times the unity gain bandwidth of the industry standard.
N
DIP8
(Plastic package)
D
SO-8
(Plastic micropackage)
P
TSSOP8
(Thin shrink small outline package)
0VUQVU
*OWFSUJOHJOQVU
/POJOWFSUJOHJOQVU
7
$$
Pin connections (top view)
7$$
0VUQVU
*OWFSUJOHJOQVU
/POJOWFSUJOHJOQVU
Table 1.
Device summary
Order codes Temperature range
MC4558CN
MC4558CD/CDT
MC4558CPT
MC4558ID/IDT
0 °C to +70 °C
-40 °C to +105 °C
April 2012
This is information on a product in full production.
Package
DIP8
SO-8
TSSOP8
SO-8
Doc ID 2181 Rev 3
Packing
Tube
Tube or tape & reel
Tape & reel
Tube or tape & reel
Marking
MC4558CN
4558C
4558I
1/11 www.st.com
11
Absolute maximum ratings
1 Absolute maximum ratings
MC4558
Table 2.
Symbol
Key parameters and their absolute maximum ratings
Parameter MC4558I MC4558C Unit
V
CC
V i
(1)
V
T
P
R id
(2) tot oper thja
ESD
Supply voltage
Input voltage
Differential input voltage
Power dissipation
Output short-circuit duration
Operating free-air temperature range
Thermal resistance junction-to-ambient:
SO-8
TSSOP8
DIP8
HBM: Human body model
(3)
MM: Machine model
(4)
CDM: Charged device model
±22
±15
±30
680
Infinite
-40 to +105
125
120
85
500
200
1500
0 to +70
V
V
V mW
°C
°C/W
V
1.
Input voltage is with respect to the midpoint between Vcc+ and Vcc-. Its value must never exceed 15 V or the magnitude of Vcc, whichever is less.
2.
Differential voltages are the non-inverting input terminal with respect to the inverting input terminal.
3.
Human body model, 100 pF discharged through a 1.5 k
Ω resistor into pin of device.
4.
Machine model ESD, a 200 pF cap is charged to the specified voltage, then discharged directly into the IC with no external series resistor (internal resistor < 5
Ω
), into pin of device.
Table 3.
Symbol
V
CC
Operating conditions
Supply voltage
Parameter Min.
±2
Max.
±20
Unit
V
2/11 Doc ID 2181 Rev 3
MC4558
2 Typical application schematic
Figure 1.
Schematic diagram (1/2MC4558)
L 8
Typical application schematic
7
$$
*OWFSUJOHJOQVU
/POJOWFSUJOHJOQVU
8
8
8
0VUQVU
Q'
L 8
Q'
L 8
8
L 8 L 8
7
$$
Doc ID 2181 Rev 3 3/11
Electrical characteristics MC4558
Table 4.
Symbol
V io
I io
I ib
A vd
SVR
I
CC
V icm
CMR
I os
V o
SR t r
K
OV
R i
C i
R o
B
Electrical characteristics for V
CC
= ±15 V, T amb
= 25 °C (unless otherwise specified)
Parameter Min.
Typ.
Max.
Unit
Input offset voltage (R s
≤ 10k Ω )
T amb
= +25°C
T min
. ≤ amb
T max.
Input offset current
T amb
= +25°C
T min
. ≤ amb
T max.
Input bias current
T amb
= +25°C
T min
. ≤ amb
T max.
Large signal voltage gain (R
L
= 2k Ω , V o
= ±10V)
T amb
= +25°C
T min
. ≤ amb
T max.
Supply voltage rejection ratio (R s
≤ 10k Ω )
T amb
= +25°C
T min
. ≤ amb
T max.
Supply current, all amplifiers, no load
T amb
= +25°C
T min
. ≤ amb
T max.
Input common mode voltage range
T amb
= +25°C
T min
. ≤ amb
T max.
Common-mode rejection ratio (R s
≤ 10k Ω )
T amb
= +25°C
T min
. ≤ amb
T max.
Output short-circuit current
50
25
77
77
±12
±12
70
70
10
1
20
50
200
90
2.3
90
20
5
6
100
200
400
500
4.5
6
40 mV nA nA
V/mV dB mA
V dB mA
Output voltage swing
T amb
= +25°C R
L
= 10k Ω
R
L
T
R
= 2k Ω min
L
. T amb
= 2k Ω
≤ max.
R
L
= 10k
Ω
Slew rate
V i
= ±10, R
L
= 2k Ω , C
L
= 100pF, T amb
= 25°C, unity gain
Rise time
V i
= ±20mV, R
L
= 2k Ω , C
L
= 100pF, T amb
= 25°C, unity gain
Overshoot
V i
= ±20mV, R
L
= 2k Ω , C
L
= 100pF, T amb
= 25°C, unity gain
Input resistance
Input capacitance
Output resistance
Unity gain bandwidth
±12
±10
±12
±10
1.5
0.3
±14
±13
2.2
0.3
15
2
1.4
75
2.8
V
V/µs
µs
%
M Ω pF
Ω
MHz
4/11 Doc ID 2181 Rev 3
MC4558 Electrical characteristics
Table 4.
Symbol
GBP
THD e n
V
O1
/V
O2
Electrical characteristics for V
CC
= ±15 V, T amb
= 25 °C (unless otherwise specified)
Parameter Min.
Typ.
Max.
Unit
Gain bandwidth product
V i
= 10mV, R
L
= 2k Ω , C
L
= 100pF, f = 100kHz, T amb
= 25°C
Total harmonic distortion f = 1kHz, A v
= 20dB, R
L
= 2k Ω , V o
= 2V pp
, C
L
= 100pF, T amb
= 25°C
Equivalent input noise voltage (R
S
= 100 Ω , f = 1kHz)
5.5
0.008
12
MHz
%
Channel separation 120
Hz dB
Doc ID 2181 Rev 3 5/11
Electrical characteristics MC4558
Figure 2.
Transient response test circuit Figure 3.
Positive output voltage swing vs. load resistance
04$*--04$01&
7
*
3
$
-
04$*--04$01&
Figure 4.
Open loop frequency response Figure 5.
Negative output voltage swing vs. load resistance
Figure 6.
Phase margin vs. frequency Figure 7.
Power bandwidth
6/11 Doc ID 2181 Rev 3
MC4558
4 Package mechanical data
Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK
®
packages, depending on their level of environmental compliance. ECOPACK
® specifications, grade definitions and product status are available at: www.st.com
.
ECOPACK
®
is an ST trademark.
Figure 8.
DIP8 package
Plastic DIP-8 MECHANICAL DATA
MIN.
mm.
TYP
3.3
MAX.
MIN.
inch
TYP.
0.130
MAX.
DIM.
I
L
Z e e3 e4
F b b1
D
E
A a1
B
B1
0.7
1.39
0.91
0.38
0.44
0.5
8.8
2.54
7.62
7.62
3.3
1.65
1.04
0.5
9.8
7.1
4.8
1.6
0.028
0.055
0.036
0.015
0.017
0.020
0.346
0.100
0.300
0.300
0.130
0.065
0.041
0.020
0.386
0.280
0.189
0.063
Doc ID 2181 Rev 3
P001F
7/11
Package mechanical data
Figure 9.
SO-8 package
DIM.
D
E e
H h
L k ddd
A
A1
A2
B
C
0.33
0.19
4.80
3.80
MIN.
1.35
0.10
1.10
5.80
0.25
0.40
SO-8 MECHANICAL DATA mm.
TYP
0.51
0.25
5.00
4.00
MAX.
1.75
0.25
1.65
MIN.
0.053
0.04
0.043
0.013
0.007
0.189
0.150
1.27
6.20
0.50
0.228
0.010
1.27
0.1
8 ˚ (max.)
0.016
inch
TYP.
0.050
0.244
0.020
0.050
0.04
MAX.
0.069
0.010
0.065
0.020
0.010
0.197
0.157
MC4558
0016023/C
8/11 Doc ID 2181 Rev 3
MC4558 Package mechanical data
DIM.
c
D
E
E1 e
K
L
L1
A
A1
A2 b
Figure 10.
TSSOP8 package
MIN.
0.05
0.80
0.19
0.09
2.90
6.20
4.30
0˚
0.45
TSSOP8 MECHANICAL DATA mm.
TYP MIN.
1.00
3.00
6.40
4.40
0.65
MAX.
1.2
0.15
1.05
0.30
0.20
3.10
6.60
4.50
0.002
0.031
0.007
0.004
0.114
0.244
0.169
8˚
0.75
0˚
0.018
0.60
1 inch
TYP.
0.039
0.118
0.252
0.173
0.0256
0.024
0.039
MAX.
0.047
0.006
0.041
0.012
0.008
0.122
0.260
0.177
8˚
0.030
Doc ID 2181 Rev 3
0079397/D
9/11
Revision history MC4558
Table 5.
Date
Oct-2001
Document revision history
Revision
1 Initial release.
Oct-2005
13-Apr-2012
2
3
Changes
The following changes were made in this revision:
–
Table 3.: Operating conditions on page 2
updated with Vcc min. and max.
– Addition of supplementary data in
Table 2.: Key parameters and their absolute maximum ratings on page 2
Minor grammatical and formatting changes throughout.
– ESD MM changed from 500 V to 200 V in
Table 2: Key parameters and their absolute maximum ratings
– Order codes MC4558IN and MC4558IPT removed from
Table 1.:
Device summary
– Minor text and formatting changes throughout.
10/11 Doc ID 2181 Rev 3
MC4558
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2012 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
Doc ID 2181 Rev 3 11/11
