STBR3008-Y
Datasheet
Automotive 800 V, 30 A bridge rectifier diode
A1
K
DO-247
A
K
K
A
A
NC
D²PAK HV
Product status link
STBR3008-Y
Product summary
Symbol Value
I
F(AV)
V
RRM
T j
V
F
(typ.)
30 A
800 V
-40 to +175 °C
1.0 V
Features
• AEC-Q101 qualified
• Ultra low conduction losses
• Ultra-low reverse losses
• High junction temperature capability (+175 °C)
• V
RRM
guaranteed from -40 to +175 °C
• D 2 PAK HV creepage distance (anode to cathode) = 5.38 mm min. (with top coating)
• PPAP capable
• ECOPACK2 compliant for DO-247
• ECOPACK1 compliant for D 2 PAK HV
Applications
• On board charger (OBC)
• Charging stations
• Bridge function
Description
The high quality design of this diode has produced a device with consistently reproducible characteristics and intrinsic ruggedness. These characteristics make it ideal for heavy duty applications that demand long term reliability like automotive applications.
Thanks to its ultra-low conduction losses, the STBR3008-Y is especially suitable for use as input bridge diode in battery chargers or charging stations.
DS13076 - Rev 3 - June 2020
For further information contact your local STMicroelectronics sales office.
www.st.com
1
STBR3008-Y
Characteristics
Characteristics
Table 1. Absolute ratings (limiting values at 25 °C, unless otherwise specified)
Symbol
V
RRM
V
RSM
I
F(RMS)
I
F(AV)
I
FSM
T stg
T j
Repetitive peak reverse voltage
Non-repetitive surge reverse voltage
Forward rms current
Average forward current
Surge non repetitive forward current
Storage temperature range
Operating junction temperature
Parameter
T j
= -40 °C to +175 °C t p
= 10 ms square
T
C
= 160 °C, δ = 0.5 square wave t p
= 10 ms sinusoidal
Value
800
900
45
30
350
-65 to +175
-40 to +175
A
A
A
Unit
V
V
°C
°C
Symbol
R th(j-c)
R th(j-c)
Junction to case (DO-247)
Junction to case (D²PAK HV)
Table 2. Thermal parameters
Parameter
Typ.
value
Unit
0.35
°C/W
0.40
°C/W
For more information, please refer to the following application note :
• AN5088 : Rectifiers thermal management, handling and mounting recommendations
Symbol
I
R
(1)
V
F
(2)
Parameter
Reverse leakage current
Forward voltage drop
Table 3. Static electrical characteristics
T j
= 25 °C
T j
= 150 °C
T j
= 25 °C
T j
= 150 °C
Test conditions
I
V
F
R
= V
RRM
= 30 A
1. Pulse test: t p
= 5 ms, δ < 2%
2. Pulse test: t p
= 380 µs, δ < 2%
Min.
Typ.
Max.
Unit
2
µA
10 100
-
1.00
0.88
1.10
0.97
V
To evaluate the conduction losses, use the following equation:
P = 0.75 x I
F(AV)
+ 0.0073 x I
F
2
(RMS)
For more information, please refer to the following application notes related to the power losses:
• AN604: Calculation of conduction losses in a power rectifier
• AN4021: Calculation of reverse losses in a power diode
DS13076 - Rev 3 page 2/12
STBR3008-Y
Characteristics (curves)
1.1
Characteristics (curves)
Figure 1. Average forward power dissipation versus average forward current
50
P(W)
δ = 0.5
40
δ = 0.2
30
δ = 0.05
δ = 0.1
δ = 1
20
T
10
0
0 5 10 15
I
F(AV)
(A)
20 25 30
δ =tp/T
35 tp
40
Figure 2. Forward voltage drop versus forward current
(typical values)
1.0E+03
1.0E+02
1.0E+01
1.0E+00
1.0E-01
1.0E-02
0.0
0.4
T j
=150 °C
0.8
T j
=25 °C
1.2
1.6
Figure 3. Forward voltage drop versus forward current
(maximum values)
1.0E+03
1.0E+02
1.0E+01
1.0E+00
1.0E-01
1.0E-02
0.0
0.4
T j
=150 °C
0.8
T j
=25 °C
1.2
1.6
Figure 4. Relative variation of thermal impedance junction to case versus pulse duration
Z th(j-c)
/R th(j-c)
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
1.E-03
Single pulse
1.E-02 1.E-01 1.E+00
DS13076 - Rev 3 page 3/12
STBR3008-Y
Characteristics (curves)
Figure 5. Junction capacitance versus reverse voltage applied (typical values)
1000
C(pF)
100
10
1 10 100 1000
F=1 MHz
V
OSC
T j
=30 mV
RMS
=25 °C
10000
Figure 6. Relative variation of non-repetitive peak surge forward current versus pulse duration (sinusoidal waveform)
4.0
I
FSM
(t p
) / I
FSM
(10ms)
3.5
3.0
2.5
2.0
1.5
1.0
0.1
1.0
t p
(ms)
10.0
Figure 7. Relative variation of non-repetitive peak surge forward current versus initial junction temperature
(sinusoidal waveform)
1.2
I
FSM
(T j
) / I
FSM
(25°C)
1.0
0.8
0.6
0.4
0.2
0.0
25 50 75 100 125 150
T j
(°C)
175
Figure 8. Non repetitive surge peak forward current versus number of cycles
400
350
300
250
200
150
100
50
0
1
I
FSM
( A)
One cycle Number of cycles
10
F = 50 Hz
T j
initial = 25 °C
100
DS13076 - Rev 3 page 4/12
2
2.1
STBR3008-Y
Package information
Package information
•
•
•
•
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com
. ECOPACK is an ST trademark.
DO-247 package information
Epoxy meets UL94, V0
Cooling method: by conduction (C)
Recommended torque value: 0.8 N·m (DO-247)
Maximum torque value: 1.0 N·m (DO-247)
Figure 9. DO-247 package outline
V
V Dia
H
0.10
A
L
L5
L3
V2
G
F
L2
F2
F3
L1
L4
D
M E
DS13076 - Rev 3 page 5/12
DS13076 - Rev 3
Ref.
L2
L3
L4
L5
M
V
V2
Dia.
F3
G
H
L
L1
F
F2
A
D
E
STBR3008-Y
DO-247 package information
Min.
4.85
2.20
0.40
1.00
Table 4. DO-247 package mechanical data
Dimensions
Millimeters
Max.
5.15
2.60
0.80
1.40
Min.
0.191
0.086
0.015
0.039
2.00 typ.
2.00
2.40
0.078
10.90 typ.
15.45
19.85
3.70
15.75
20.15
4.30
0.608
0.781
0.145
18.50 typ.
14.20
14.80
0.559
34.60 typ.
5.50 typ.
2.00
3.00
0.078
5°
60°
3.55
3.65
0.139
Inches
0.078 typ.
0.429 typ.
0.728 typ.
1.362 typ.
0.216 typ.
5°
60°
Max.
0.203
0.102
0.031
0.055
0.094
0.620
0.793
0.169
0.582
0.118
0.143
page 6/12
2.2
STBR3008-Y
D²PAK high voltage package information
•
D²PAK high voltage package information
Epoxy meets UL94, V0
Figure 10. D²PAK high voltage package outline
DS13076 - Rev 3 page 7/12
DS13076 - Rev 3
Ref.
F
F2
H
H1
J1
L
L1
A
A1
C
D e
E
M
R
V
L2
L3
L4
STBR3008-Y
D²PAK high voltage package information
Table 5. D²PAK high voltage package mechanical data
Dimensions
Typ.
4.93
6.85
1.5
2.6
0.20
0°
10.00
7.40
2.49
15.30
1.27
8.95
4.98
0.50
0.78
1.14
Min.
4.30
0.03
1.17
Figure 11. D²PAK high voltage footprint in mm
10,58
5.23
7.25
1.7
2.9
0.60
8°
10.40
7.80
2.69
15.80
1.40
9.35
5.18
0.90
0.85
1.70
Max.
4.70
0.20
1.37
5,10
7,46
15,95
3,40
1,20
5,08 page 8/12
STBR3008-Y
D²PAK high voltage package information
2.2.1
Note:
Creepage distance between anode and cathode
Symbol
Cd
A-K1
Cd
A-K2
Table 6. Creepage distance between anode and cathode
Parameter
Minimum creepage distance between A and K1 (with top coating)
Minimum creepage distance between A and K2 (without top coating)
D²PAK HV
Value Unit
5.38
3.48
mm
D²PAK HV creepage distance (anode to cathode) = 5.38 mm min. (refer to IEC 60664-1)
Figure 12. Creepage with top coating
Figure 13. Creepage without top coating
DS13076 - Rev 3 page 9/12
3
STBR3008-Y
Ordering information
Ordering information
Order code
STBR3008WY
STBR3008G2Y-TR
Table 7. Ordering information
Marking
STBR3008WY
BR3008G2Y
Package
DO-247
D²PAK HV
Weight
4.4 g
1.48 g
Base qty.
30
1000
Delivery mode
Tube
Tape and reel
DS13076 - Rev 3 page 10/12
STBR3008-Y
Revision history
Date
17-Jul-2019
13-May-2020
03-Jun-2020
Revision
1
2
3
Table 8. Document revision history
Changes
First issue.
Added D 2 PAK HV package information.
Updated Section 2.2 D²PAK high voltage package information .
DS13076 - Rev 3 page 11/12
STBR3008-Y
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of
Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. For additional information about ST trademarks, please refer to www.st.com/trademarks . All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2020 STMicroelectronics – All rights reserved
DS13076 - Rev 3 page 12/12
