TIP32C
Power transistor
Applications
■
Linear and swithing industrial equipment
Description
The TIP32C is a silicon Epitaxial-base PNP power transistor in Jedec TO-220 plastic package. It is intented for use in medium power linear and switching applications.
The complementary NPN type is TIP31C.
.
TO-220
1
2
3
Internal schematic diagram
Order codes
Part number Marking
TIP32C TIP32C
Package
TO-220
Packing
Tube
November 2006 Rev 2 1/8 www.st.com
8
Absolute maximum ratings
Table 1.
Symbol
V
CBO
V
CEO
V
EBO
I
C
I
CM
I
B
P
TOT
T stg
T
J
Absolute maximum ratings
Parameter
Collector-base voltage (I
E
= 0)
Collector-emitter voltage (I
B
= 0)
Emitte-base voltage (I
C
= 0)
Collector current
Collector peak current (t
P
< 5ms)
Base current
Total dissipation at T case
= 25°C
T amb
= 25°C
Storage temperature
Max. operating junction temperature
TIP32C
Value
-5
-1
40
2
-100
-100
-5
-3
-65 to 150
150
Unit
A
A
W
W
°C
°C
V
A
V
V
2/8
TIP32C Electrical characteristics
(T case
= 25°C; unless otherwise specified)
Table 2.
Symbol
Electrical characteristics
Parameter Test Conditions
V
I
I
I
CEO
CES
EBO
CEO(sus
(1)
Collector cut-off current
(I
B
= 0)
Collector cut-off current
(V
BE
= 0)
Emitter cut-off current
(I
C
= 0)
Collector-emitter sustaining voltage
(I
B
= 0)
V
CE(sat)
(1)
Collector-emitter saturation voltage
I
I
V
V
V
C
CB
CB
EB
C
=-60V
=-100V
=-5V
= -30mA
= -3A _ I
B
= 375mA
V
BE(on)
(1) Base-emitter voltage I
C
= -3A _ V
CE
=-4V h
FE
(1) DC current gain
I
C
= -1A V
CE
=-4V
I
C
= -3A _ V
CE
=-4V
1. Pulsed duration = 300 ms, duty cycle ≥ 1.5%.
-100
25
10
Min.
Typ.
Max.
Unit
-0.3
mA
-0.2
mA
-1 mA
V
-1.2
-1.8
V
V
50
3/8
Electrical characteristics
Figure 1.
Safe operating area Figure 2.
Derating Curves
TIP32C
Figure 3.
DC current gain Figure 4.
Collector-emitter saturation voltage
Figure 5.
Base-emitter saturation voltage
4/8
TIP32C Package Mechanical Data
In order to meet environmental requirements, ST offers these devices in
ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97.
The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com
5/8
Package Mechanical Data
DIM.
H1
J1
L
L1
L20
L30
øP
Q
E e c
D e1
F
A b b1
MIN.
4.40
0.61
1.15
0.49
15.25
10
2.40
4.95
1.23
6.20
2.40
13
3.50
3.75
2.65
TO-220 MECHANICAL DATA mm.
TYP MAX.
4.60
0.88
1.70
0.70
15.75
10.40
2.70
5.15
1.32
6.60
2.72
14
3.93
MIN.
0.173
0.024
0.045
0.019
0.60
0.393
0.094
0.194
0.048
0.244
0.094
0.511
0.137
16.40
28.90
3.85
2.95
0.147
0.104
inch
TYP.
0.645
1.137
MAX.
0.181
0.034
0.066
0.027
0.620
0.409
0.106
0.202
0.052
0.256
0.107
0.551
0.154
0.151
0.116
TIP32C
6/8
TIP32C
Table 3.
Date
10-Oct-1999
15-Nov-2006
Revision history
Revision
1
2
Changes
Initial Release
The document has been reformatted
Revision History
7/8
TIP32C
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2006 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
8/8
