Pallet Scale PCE-SD 300 SST

 

Calibratable stainless steel drive-through scale up to 300 kg / resolution 0.1 kg / corrosion and acid resistant / protection class IP 65 / IP 68 / low overall height /

very robust design / incl. an access ramp and calibration

Before delivery, the calibratable stainless steel drive-on scale is calibrated for its location of use according to calibration class III and is then approved for two years in all of Europe for calibration class III. The stainless steel drive-through scale is made of solid corrosion and acidresistant steel. The weighing platform of the stainless steel ramp scale has encapsulated weighing cells that withstand the harshest conditions with the IP 68 protection class. The drive-on ramp is easy to drive on thanks to the low height of the stainless steel drive-through scale and, as required, can be used as a drive-on ramp or as a drive-through scale using a second optionally available drive-through ramp. The fixing plates included in the scope of delivery ensure that the calibrated stainless steel drive-through scales stand securely and prevent the ramps from slipping. The stainless steel display of the drive-through scale is IP 65 protected and can be conveniently mounted on the table, on the wall or on the optionally available stainless steel tripod. The functional package of the calibrated stainless steel drive-through scale is very extensive.

Functions such as auto tare, piece counting function, saving a fixed tare weight, recipe function, summing function and more make work much easier. The stainless steel ramp scale is ideal if you do not want to install a scale into the floor. Simply set up the drive-through scale on a level hall floor, connect the control terminal and you can start weighing. For the calibrated stainless steel drive-on scale, we offer an RS-232, USB,

LAN interface and 4..20 mA or 0 ... 10 V analog outputs or three switching outputs.

Calibrated according to M III

Statistics function

Sum up several weighings

Percent % comparative weighing

Filter (reaction time) adjustable

Animal weighing function

Piece counting function

Maximum value display

Mixed recipe weighing

Tolerance determination weight min / ok / max

A tare value can be saved

Adjustable automatic switch-off

Gross / Net key on the display

Optional: USB, LAN or 4-20 mA

Specifications

Technical Data

Model

Weighing range

300 kg

Resolutio n

0.1 kg

Min.* Weight Usable area

PCE-SD 300SST 2 kg 160 kg 860 x 1000 mm

* The minimum load is the load from which the calibration authority checks the accuracy. The verifiable drive-through scale also shows smaller weights, but these may not be used in legal transactions .

Calibration calibratable according to class M III (delivered calibrated)

Taring range

Settling time

Display over the full weighing range

< 3 s high-contrast LED with 20 mm digit height

Weighing units

Interface kg / pieces / lb optional RS-232 / USB / LAN / 4-20 mA / 0-10V

Operating temperature -10 ... +40 °C

Protection class

Power supply

Cells IP68 / Display IP65 (without connections)

~230V, 50Hz, 8VA (Schuko plug)

More information

More product info



Similar products

