advertisement
![PCE PCE-SD 600 SST Legal for Trade Balance Datasheet | Manualzz PCE PCE-SD 600 SST Legal for Trade Balance Datasheet | Manualzz](http://s3.manualzz.com/store/data/064477664_1-94e27f63f473a76a0121b4c9bfe1f3aa-360x466.png)
Pallet Scale PCE-SD 600 SST
Calibratable stainless steel drive-through pallet scale up to 600 kg / resolution 0.2 kg / corrosion and acid resistant / protection class IP 65 / IP 68 / low overall height /
very robust design / incl. an access ramp and calibration
Before delivery, the calibratable stainless steel drive-on scale is calibrated for its location of use according to calibration class III and is then approved for two years in all of Europe for calibration class III. The stainless steel drive-through scale is made of solid corrosion and acidresistant steel. The weighing platform of the stainless steel ramp scale has encapsulated weighing cells that withstand the harshest conditions with the IP 68 protection class. The drive-on ramp is easy to drive on thanks to the low height of the stainless steel drive-through scale and, as required, can be used as a drive-on ramp or as a drive-through scale using a second optionally available drive-through ramp. The fixing plates included in the scope of delivery ensure that the calibrated stainless steel drive-through scales stand securely and prevent the ramps from slipping. The stainless steel display of the drive-through scale is IP 65 protected and can be conveniently mounted on the table, on the wall or on the optionally available stainless steel tripod. The functional package of the calibrated stainless steel drive-through scale is very extensive.
Functions such as auto tare, piece counting function, saving a fixed tare weight, recipe function, summing function and more make work much easier. The stainless steel ramp scale is ideal if you do not want to install a scale into the floor. Simply set up the drive-through scale on a level hall floor, connect the control terminal and you can start weighing. For the calibrated stainless steel drive-on scale, we offer an RS-232, USB,
LAN interface and 4..20 mA or 0 ... 10 V analog outputs or three switching outputs.
Calibrated according to M III
Statistics function
Sum up several weighings
Percent % comparative weighing
Filter (reaction time) adjustable
Animal weighing function
Piece counting function
Maximum value display
Mixed recipe weighing
Tolerance determination weight min / ok / max
A tare value can be saved
Adjustable automatic switch-off
Gross / Net key on the display
Optional: USB, LAN or 4-20 mA
Specifications
Technical Data
Model
Weighing range
600 kg
Resolutio n
0.2 kg
Min.* Weight Usable area
PCE-SD 600SST 4 kg 250 kg 860 x 1000 mm
* The minimum load is the load from which the calibration authority checks the accuracy. The verifiable drive-through scale also shows smaller weights, but these may not be used in legal transactions .
Calibration calibratable according to class M III (delivered calibrated)
Taring range
Settling time
Display over the full weighing range
< 3 s high-contrast LED with 20 mm digit height
Weighing units
Interface kg / pieces / lb optional RS-232 / USB / LAN / 4-20 mA / 0-10V
Operating temperature -10 ... +40 °C
Protection class
Power supply
Cells IP68 / Display IP65 (without connections)
~230V, 50Hz, 8VA (Schuko plug)
More information
More product info
Similar products
advertisement
Related manuals
advertisement