HD-120
e-drum module user manual
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: +49 (0) 9546 9223-0
Internet: www.thomann.de
15.02.2022, ID: 461227 (V2) Software V1.8
Table of contents
Table of contents
1 General information................................................................................................................................. 5
1.1 Further information........................................................................................................................... 6
1.2 Notational conventions.................................................................................................................... 7
1.3 Symbols and signal words............................................................................................................... 9
2 Safety instructions.................................................................................................................................. 11
3 Features....................................................................................................................................................... 13
4 Installation.................................................................................................................................................. 14
5 Connections and controls................................................................................................................... 16
6 Operating.................................................................................................................................................... 21
6.1 Functions............................................................................................................................................. 21
6.2 Selecting drum kits.......................................................................................................................... 22
6.3 Playing the drum kit........................................................................................................................ 24
6.4 Metronome function....................................................................................................................... 25
6.5 Adjusting the pedals....................................................................................................................... 27
6.6 MIDI implementation..................................................................................................................... 28
HD-120
3
Table of contents
7 Technical specifications....................................................................................................................... 33
8 Plug and connection assignment.................................................................................................... 35
9 Cleaning....................................................................................................................................................... 37
10 Protecting the environment.............................................................................................................. 38
e-drum module
4
General information
1 General information
This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the device to another user, be sure that they also receive this manual.
Our products and user manuals are subject to a process of continuous development. We there‐ fore reserve the right to make changes without notice. Please refer to the latest version of the user manual which is ready for download under www.thomann.de
.
HD-120
5
General information
1.1 Further information
On our website ( www.thomann.de) you will find lots of further information and details on the following points:
Download
Keyword search
Service
This manual is also available as PDF file for you to download.
Use the search function in the electronic version to find the topics of interest for you quickly.
Online guides
Our online guides provide detailed information on technical basics and terms.
Personal consultation For personal consultation please contact our technical hotline.
If you have any problems with the device the customer service will gladly assist you.
e-drum module
6
General information
1.2 Notational conventions
This manual uses the following notational conventions:
Letterings The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
Displays Texts and values displayed on the device are marked by quotation marks and italics.
Examples: ‘24ch’ , ‘OFF’ .
HD-120
7
General information
Instructions
Cross-references
The individual steps of an instruction are numbered consecutively. The result of a step is indented and highlighted by an arrow.
Example:
1.
Switch on the device.
2.
Press [Auto] .
ð Automatic operation is started.
3.
Switch off the device.
References to other locations in this manual are identified by an arrow and the specified page number. In the electronic version of the manual, you can click the cross-reference to jump to the specified location.
Example: See Ä ‘Cross-references’ on page 8 .
e-drum module
8
General information
1.3 Symbols and signal words
In this section you will find an overview of the meaning of symbols and signal words that are used in this manual.
Signal word
DANGER!
CAUTION!
NOTICE!
Meaning
This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided.
This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in minor injury if it is not avoided.
This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in material and environmental damage if it is not avoided.
HD-120
9
General information
Warning signs Type of danger
Warning – danger zone.
10 e-drum module
Safety instructions
2 Safety instructions
Intended use Drum modules are intended to be used for converting digital trigger signals from drum pads to various percussion sounds. Use the unit only as described in this manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
This device may be used only by persons with sufficient physical, sensorial, and intellectual abilities and having corresponding knowledge and experience. Other persons may use this device only if they are supervised or instructed by a person who is responsible for their safety.
Safety
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the unit. They could swallow the pieces and choke! Never let children unattended use electrical devices.
HD-120
11
Safety instructions
CAUTION!
Possible hearing damage
With loudspeakers or headphones connected, the device can produce volume levels that may cause temporary or permanent hearing impairment. Do not operate the device permanently at a high volume level. Decrease the volume level immediately if you experience ringing in your ears or hearing impairment.
NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and strong vibrations. Only operate the device within the ambient conditions specified in the chapter
‘Technical specifications’ of this user manual. Avoid heavy temperature fluctuations and do not switch the device on immediately after it was exposed to temperature fluctuations (for example after transport at low outside temperatures). Dust and dirt inside can damage the unit. When operated in harmful ambient conditions (dust, smoke, nicotine, fog, etc.), the unit should be maintained by qualified service personnel at regular intervals to prevent overheating and other malfunction.
NOTICE!
External power supply
The device is powered by an external power supply. Before connecting the external power supply, ensure that the input voltage (AC outlet) matches the voltage rating of the device and that the AC outlet is protected by a residual current circuit breaker. Failure to do so could result in damage to the device and possibly the user. Unplug the external power supply before electrical storms occur and when the device is unused for long periods of time to reduce the risk of electric shock or fire.
e-drum module
12
3 Features
n Space-saving, complete e-drum set for beginners n 12 preprogrammed drum kits n Metronome n Connections for headphones, AUX, USB and MIDI n including drum track, cabling, sticks, stick holders, headphones and seat
Features
HD-120
13
Installation
4 Installation
Setup, connecting pads and pedals
Setup and assembly of the pads and pedals are described in detail in the enclosed assembly guide. Finally check that all cables between the pads and the e-drum module have been prop‐ erly connected.
Connecting the power adapter Connect the included power adapter to the 9V input of the e-drum module. Then plug the mains plug into the socket.
Connecting headphones
Connecting audio devices
Connect your stereo headphones to the phones output of the drum module.
Connect the inputs of your amplifier or active monitors to the [OUTPUT] sockets of the drum module.
Connecting a CD or MP3 player Connect a CD or MP3 player to the input socket [AUX] IN of the drum module.
e-drum module
14
Connecting USB devices
Installation
Connect external MIDI devices or your computer to the USB port of the drum module.
HD-120
15
Connections and controls
5 Connections and controls
Front panel
,
+
*
)
( ' & % $ e-drum module
16
ö
#
6
7
4
5
1
2
3
Display
[DC 9V]
Connection socket for the power adapter
Selects an option or sets a value.
Turns the metronome on and off.
Selects an option or sets a value.
[VOLUME]
Volume control. Controls the volume of the drum kits.
Pressing turns the device on. Holding down turns the device off.
HD-120
Connections and controls
17
8
Connections and controls
[OUTPUT]
Line output for external audio devices, designed as 3.5 mm jack socket
9
10
11
Headphones output, designed as 3.5 mm stereo jack socket.
[AUX]
Input for external audio devices like MP3 or CD players, designed as 3.5 mm stereo jack socket.
[USB]
USB MIDI port, designed as USB-B socket e-drum module
18
Rear panel
.
-
HD-120
Connections and controls
19
12
13
Connections and controls
Holder for attaching the drum module to the drum set
Connection socket for connecting cable to the drum set, designed as 25-pin D-sub connector socket
20 e-drum module
Operating
6 Operating
6.1 Functions
Turning on / off
Adjusting the volume
Software version
Check all cable connections for correct fit before turning on
Before switching on, turn the [VOLUME] control to minimum.
Press to turn the drum module on. Press and hold to turn the drum module off.
To adjust the volume, hit a pad and at the same time adjust the volume of the drum module with the [VOLUME] control.
To display the system information, press and hold for 3 seconds with the device switched on. The current software version is displayed.
HD-120
21
Operating
Reset to factory defaults To reset the drum module to factory settings, turn it off first. Press and hold and simulta‐ neously. The display shows ‘CLr’ . The drum module is reset to factory default settings.
6.2 Selecting drum kits
A drum kit is a compilation in which a certain sound (Voice) and several sound parameters are assigned to each pad. Selecting different drum kits lets you customise the sound in seconds to the desired music genre.
e-drum module
22
Selecting a drum kit To select a certain drum kit, proceed as follows:
Press or to select the desired drum kit.
ð The current kit name and kit number are displayed.
The following drum sets are available:
4
5
6
2
3
Number
1
Drum kit
Rock Kit
Jazz Kit
Funk Kit
Metal Kit
Elec Kit
Rock Live
Number
7
8
9
10
11
12
Drum kit
Metal Live
Elec Live
GM Standard
GM Room
GM Power
Percussion
Operating
HD-120
23
Operating
6.3 Playing the drum kit
Like on an acoustic drum kit, the pads respond to different playing techniques and dynamics.
All pads are velocity sensitive. Some voices change their timbre depending on the punch used.
n Bass Drum
– Change the sound of the bass drum by striking the pedal with different strength and speed.
n Hi-hat
Change the sound of the hi-hat by combining pedal and stroke techniques in different ways.
– Strike the Hi-hat pad without pressing the pedal.
– Strike the Hi-hat pad with fully pressed pedal.
– Step on the hi-hat pedal without hitting the hi-hat pad.
– Play the Hi-hat with fully pressed pedal and then open it suddenly.
e-drum module
24
Operating
6.4 Metronome function
Switch on the drum module. Press to turn the metronome on. While the metronome is on, the indicator LED of the button is flashing.
Settings
1.
Press to turn the metronome on.
2.
To set the desired tempo, press and hold until the display shows ‘b - (number)’ .
3.
Use or to set a value between ‘1’ and ‘5’ for the time signatures 1/4 … 5/4.
4.
Press to exit the setting mode.
5.
To turn off the metronome, press again .
Volume
1.
Press to turn the metronome on.
2.
To set the desired volume of the metronome, press and hold and simultaneously until the display shows ‘Lu(number)’ .
HD-120
25
Operating
3.
Use or to set a value between ‘0’ (silent) and ‘9’ (maximum).
4.
Press to exit the setting mode.
5.
To turn off the metronome, press again .
26 e-drum module
Operating
6.5 Adjusting the pedals
Temperature fluctuations or humidity can alter the sensitivity of the pedals. To reset the sensi‐ tivity of the pedals to factory defaults:
1.
While the drum module is switched off, simultaneously press and hold and .
ð The display shows ‘bdF’ .
2.
Step on the bass drum pedal and hold the pedal in this position.
ð flashes green and orange during bass drum pedal setup.
3.
When stops flashing, the bass drum pedal setup is finished. Now release the bass drum pedal.
ð The display shows ‘HHF’ .
4.
Step on the Hi-hat pedal and hold the pedal in this position.
ð flashes green and orange during Hi-hat pedal setup.
5.
lights red, the Hi-hat pedal setup is finished. Now release the Hi-hat pedal.
HD-120
27
Operating
ð Pedal adjustment is complete.
6.6 MIDI implementation
Connect the drum module to a synthesizer or PC via the USB-MIDI interface to use the MIDI function.
Function
Basic channel
Mode
Note number
Default
Changed
Default
Messages
Altered
Transmitted
10
No
No
No
********
0…127
Recognized
1-8, 10-16
No
Mode 3
No
********
0…127
Remarks e-drum module
28
Function
Velocity
Aftertouch
Pitch bend
Control change
6
7
10
4
5
0
1
True voice
Note ON
Note OFF
Keys
Channels
No
No
No
No
No
No
No
No
No
No
Transmitted
********
1…127
No
HD-120
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Yes
Yes
Recognized
0…127
1…127
1…127
Operating
Remarks
Bank select
Modulation
Foot control
Portamento time
Data entry
Volume
Pan
29
Operating
Function
67
71
72
73
11
64
65
66
74
80
81
91
93
30
No
No
No
No
No
No
No
No
No
No
Transmitted
No
No
No e-drum module
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Recognized
Yes
Yes
Yes
Remarks
Expression
Sustain pedal
Portamento ON/OFF
Sostenuto pedal
Soft pedal
Resonance
Release time
Attack Time
Cut off
Reverb program
Chorus program
Reverb level
Chorus level
Function
Program change
System exclusive
System common
120
121
123
System real time
Aux messages
Song Position
Song Select
Tune
Clock
Command
Local ON/OFF
All Notes OFF
No
No
No
No
No
No
No
No
No
Transmitted
No
No
No
HD-120
No
No
No
No
No
Yes
Yes
No
No
Recognized
Yes
Yes
Yes
Operating
Remarks
All Sound Off
Reset All Controllers
All Notes Off
31
Operating
Function
Active Sense
Reset
Transmitted
Yes
No
Recognized
No
No
Remarks
Mode 1: Omni on, poly. Mode 2: Omni on, mono. Mode 3: Omni off, poly. Mode 4: Omni off, mono.
e-drum module
32
Technical specifications
7 Technical specifications
Input connections
Output connections
Drum kits
Power supply
Operating voltage
Dimensions (W × H × D)
Weight
Power supply
AUX in
Signal transmission drum set
Line out
Headphones
MIDI
12
External power adapter, 100 - 240 V 50/60 Hz
9 V / 300 mA , centre negative
451 mm × 726 mm × 286 mm
20.5 kg
Connector socket for external power adapter
1 × 3.5 mm stereo phone socket
1 × D-sub connector socket, 25-pin
1 × 3.5 mm jack socket
1 × 3.5 mm stereo phone socket
USB-B
HD-120
33
Technical specifications
Ambient conditions
Further information
Rack included
Seat included
Bass drum pedal included
Headphones included
Mesh Head Pads
Stereo pads
Number of direct outputs
Temperature range
Relative humidity
No
No
0
Yes
Yes
Yes
Yes e-drum module
34
0 °C…40 °C
20 %…80 % (non-condensing)
Plug and connection assignment
8 Plug and connection assignment
Introduction This chapter will help you select the right cables and plugs to connect your valuable equip‐ ment in such a way that a perfect sound experience is ensured.
Please note these advices, because especially in ‘Sound & Light’ caution is indicated: Even if a plug fits into the socket, an incorrect connection may result in a destroyed power amp, a short circuit or ‘just’ in poor transmission quality!
Balanced and unbalanced trans‐ mission
Unbalanced transmission is mainly used in semi-professional environment and in hifi use.
Instrument cables with two conductors (one core plus shielding) are typical representatives of the unbalanced transmission. One conductor is ground and shielding while the signal is trans‐ mitted through the core.
Unbalanced transmission is susceptible to electromagnetic interference, especially at low levels, such as microphone signals and when using long cables.
In a professional environment, therefore, the balanced transmission is preferred, because this enables an undisturbed transmission of signals over long distances. In addition to the conduc‐ tors ‘Ground’ and ‘Signal’, in a balanced transmission a second core is added. This also transfers the signal, but phase-shifted by 180°.
HD-120
35
Plug and connection assignment
Since the interference affects both cores equally, by subtracting the phase-shifted signals, the interfering signal is completely neutralized. The result is a pure signal without any noise inter‐ ference.
Three-pole 1/8" mini phone jack
(stereo, unbalanced)
1
2
3
Signal (left)
Signal (right)
Ground, shielding e-drum module
36
9 Cleaning
Device components
Cleaning
Clean the externally accessible device parts regularly. The frequency of cleaning depends on the operating environment: wet, smoky or particularly dirty surroundings can cause more accumulation of dirt on the device parts.
n Clean with a soft dry cloth.
n Stubborn dirt can be removed with a slightly dampened cloth.
n Never use cleaners containing alcohol or thinner.
n Do not place vinyl objects on the device, as vinyl may stick to the surface or cause it to discolour.
HD-120
37
Protecting the environment
10 Protecting the environment
Disposal of the packaging mate‐ rial
For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling.
Ensure that plastic bags, packaging, etc. are properly disposed of.
Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Disposal of your old device
This product is subject to the European Waste Electrical and Electronic Equipment Directive
(WEEE) in its currently valid version. Do not dispose with your normal household waste.
Dispose of this device through an approved waste disposal firm or through your local waste facility. When discarding the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility.
e-drum module
38
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de
