Model:LAPIS

Manufacturer:ULTRASONE AG

FCC ID:2A3Z5-LAPIS

Quick Start Guide

Smart Touch

Select area Select area

Power Box Functional Button

Your Top Experience

Hybrid Active noise cancellation for immersive sound.

New drives and diaphragms deliver full and richer sound.

Playtime lasts for over 9 hours from single charge and the wireless charging case delivers more than 45 hours of battery life.

TYPE-C charging cable.

Ergonomic mechanical design.

Power and Bluetooth

Th e earphones work with any Bluetoothenabled device-mobile phones, tablets, laptops, desktops, and TVs will connect wirelessly with the HONSENN earphones.

Stept1:

Open the charging box and the headset will automatically turn on.For the first use, please press and hold the button of the charging box for 3 seconds and enter the

Bluetooth pairing mode. The next time you use the headset, it will automatically connect to the last connected device. (Take the headset out of the electric box and press and hold for 3 seconds to turn off the touch, and then press and hold for 3 seconds to turn on).

Bluetooth Menu

LAPIS

Stept2:

Go to the Bluetooth menu in your device, and select " LAPIS ". It may take a few moments to appear.The operation method is as follows:

Attention please:

If it fails to connect successfully or other questions, please reboot the earphones or put them back into the power box, and long press 10s power box button to unpair earphones and clear the paring records, then enter pairing mode.

After use, please put the earphones back into the power box.

Noise Cancelling & Transparency

Switch Normal modes / ANC / Transparency by touch.

Normal modes, Press and hold the left/right ear for 1S to turn on the

ANC modes.

ANC on , press and hold the left/right ear for 1S to turn on the transparent modes.

Transparency on, press and hold the left/right ear for 1S to turn on the normal modes.

ANC(Active Noise Cancellation): Reduce unwanted background noise.

Transparency: Stay aware of surroundings while listening to music.

Call

Answer a call: Click left/right touch area.

Hang up the call: Click the left/right touch area to hang up the current call and restore the state before the call.

Reject a call: Long press the 1S left/right touch area to reject the call.

Note: The ANC function cannot be operated during a call.

Cancel an outgoing call: Click the left/right touch area.

Click left/right Touch area to answer a third-party incoming call,while hang up the current call.

Please use the USB-C cable we provided.

Why? Not all USB-C cables will work with the HONSENN ANC

Earphones. There are different charging standards that are outside of our control.

For example: your laptop's USB-C charger will NOT charge the earphones.

If you need to use a third party charger, it should originate in a

USB-A connection.

Volume and Playback Control

Play/pause music: Click the left/right touch area.

Next song: Double-click the left earphone touch button.

Previous song: triple-click the left earphone touch button.

Voice assistant: Double-click the touch area of the right ear to control the voice assistant on/off.

What will you get?

HONSENN Wireless earphones

Charging Case

Type-C Charging Cable

Spare Ear Tips

Manual

X2

X1

X1

X2

X1

Charging Case LED Indicator

LED Battery Life

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.