V2300 SERIES

OWNER’S MANUAL

V2312 V2315 V2318S

TABLE OF CONTENTS

VARI V2312 and V2315 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

VARI V2318S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11

Warranty/Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

WELCOME

The Harbinger VARI 2300 Series Powered Speakers each combine at least 2000 watts of peak power with sound optimizing DSP and versatile inputs, outputs and controls, delivering premium sound reproduction with great flexibility.

V2312 12-inch 2-way Powered Speaker with Bluetooth Audio Input

- 12-inch speaker plus high precision high frequency compression driver

- Bluetooth audio input, dual mic/instrument inputs, dedicated stereo line input and aux input -- all available simultaneously

- DSP providing selectable Voicings, easily adjustable Bass and Treble, a transparent and dynamic limiter, and high precision crossover for extremely accurate, high fidelity sound

- Innovative Smart Stereo™ capability, with easy volume and tone control for both speakers from the master unit

- Versatile cabinet allowing free-standing, pole mounted, and lay-flat floor monitor placement

V2315 15-inch 2-way Powered Speaker with Bluetooth Audio Input

- All the same DSP, input, output, control and usage capabilities as the V2312

- A larger 15-inch speaker, delivering additional volume

V2318S 18-inch Powered Subwoofer with Easy-Roll Casters

- Add a V2318S to bring high impact to your powered speaker setup, compatible with V2312, V2315 and all other powered speakers

- DSP provides a transparent and dynamic limiter, and high precision crossover for extremely accurate, high fidelity sound

- Includes adjustable crossover and phase for optimal pairing with any powered speakers

V2300 SERIES OWNER’S MANUAL

2

QUICK START GUIDE: SINGLE V2312/V2315

SETTING UP / HELPFUL TIPS

• Position the VARI speaker in the desired location, and ensure the speaker is stable.

• Make sure the Power Switch is off.

• Turn Channel 1, 2, and 3 knobs to minimum.

• Turn Bass and Treble to center/straight up.

VARI Series speakers can be used as Main Speakers or Monitor Speakers.

MAKING THE CONNECTIONS

• Connect sources to Channel 1, 2 and 3 input jacks as desired. (All these input jacks can be used at once, along with Bluetooth audio input.)

Floor Monitor

CHECK SWITCHES

• Check that Mono / Stereo Master / Link In switch is set to Mono.

• Check that Channel 1 and Channel 2 switches match sources: Mic for microphones, Guitar for acoustic guitar or pedalboard output, Line for mixers, keyboards and other electronics.

POWERING UP

• Power on any devices connected to input jacks.

• Turn up the output volume of all sources.

• Turn Channel 1, 2 and 3 knobs to desired levels.

BLUETOOTH AUDIO INPUT

• From your Bluetooth audio source device, look for V2312 or V2315 and select it.

• See next page for Bluetooth Troubleshooting in case of difficulty.

FRONT LED LIGHT

• Check that rear panel button for FRONT LED is pressed in (On/Limit position)

• When front LED lights red, limiter is being triggered, and Channel 1, 2, and 3 knobs may need to be turned down

FOR FLOOR MONITOR USE

• Press rear panel VOICINGS button to light Floor Monitor/Wall LED.

3

Main

Speaker stand not included

V2300 SERIES OWNER’S MANUAL

1

SMART STEREO™ WITH V2312/V2315

4

2 3

A pair of VARI 2312 or 2315 speakers can operate together as a Smart

Stereo™ system, giving you control of the sound and volume of both speakers from the first master speaker, and optimally distributing all audio inputs to both speakers for rich stereo sound.

Channel 1 and 2 inputs are routed mono to both VARI’s, while all Channel 3 inputs are routed in split stereo to the VARI’s.

1 Connect all inputs and make all sound settings on the first (left) unit only.

The second (right) unit’s inputs and controls are all disabled when it is set to Link In.

2 Set the switch on first unit to Stereo Master.

3 Set the switch on second unit to Link In.

4 Connect an XLR (microphone) cable from the first unit’s OUT jack to the second unit’s LINK IN.

BLUETOOTH

®

TROUBLESHOOTING

These steps should resolve any Bluetooth trouble you may encounter:

• Power off the V2312 or V2315 and leave it off

• On your Apple iOS device

1. Open Settings app, select Bluetooth

2. If V2312 or V2315 is listed under MY DEVICES, touch info button, tap to Forget This Device

3. Turn off Bluetooth, wait 10 seconds, turn on Bluetooth

• On your Android device

1. Open Settings, select Bluetooth

2. If V2312 or V2315 is listed under Paired Devices, touch gear Icon, and tap to Unpair

3. Turn off Bluetooth, wait 10 seconds, turn on Bluetooth

• Then power on your V2312 or V2315, and Bluetooth LED should flash

• You should now be able to connect to V2312 or V2315 via Bluetooth

V2300 SERIES OWNER’S MANUAL

4

V2312/V2315 BACK PANEL

1

2

3

7

8

5

6

10

9

13

11

12

14 15 16

4

1

VOICINGS

Pressing the button selects from the available voicings (tunings) for different applications:

- Standard: for general use including music playback

- Vocal Boost: for public speaking, may also be helpful for solo performers who are singing along with acoustic guitar

- Live: for live band main PA speakers

- Floor Monitor/Wall: for enhanced clarity and reduced feedback potential for floor monitors, also may be helpful to avoid excessive bass from wall mounted speakers

2

CHANNEL 1 AND 2 KNOBS

These knobs set the volume for the inputs below them

3

MIC/GUITAR/LINE SWITCHES

Set these to match the type of source connected to the input below them

- Mic: for microphones, or line level sources with low output volumes

- Guitar: for acoustic guitar or guitar pedal board

- Line: for line level sources

4

CHANNEL 1 AND 2 INPUT JACKS

Connect XLR or 1/4-inch cables

5

CHANNEL 3 KNOB

Sets the volume for all the inputs below, including Bluetooth audio, aux and line inputs

6

BLUETOOTH AUDIO INPUT

Bluetooth audio input is automatically enabled each time you turn the speaker on, will automatically reconnect to the previous Bluetooth audio source if it is available, and will otherwise be available for Bluetooth pairing from a source audio device such as a smartphone.

- To pair, look for V2312 or V2315 from your Bluetooth audio source device.

- LED is lit solid when currently paired, blinking when available for pairing, and off if Bluetooth has been disabled by a press of the

Bluetooth Off button.

- On/Pair button forces any currently connected Bluetooth audio source to disconnect, and makes the speaker available for pairing.

- Off button disables Bluetooth. (Bluetooth will be re-enabled next time you turn power off and on, or if you press the On/Pair button.)

7

AUX INPUT

Audio from smartphones, computers and other consumer audio devices can be connected here

5

8

BALANCED LINE INPUTS

Balanced or unbalanced line level sources can be connected here

9

BASS AND TREBLE KNOBS

Adjust the sound of your speaker

10

MONO / STEREO MASTER / LINK IN SWITCH

- Mono: This speaker will output mono audio, and send mono audio to the OUT jack so it’s available for any other speaker or sound system.

- Stereo Master: This speaker will operate as the master speaker of a

Smart Stereo(TM) pair. Use a mic cable to connect this speaker’s OUT to the LINK IN jack of a second speaker of the same type. All inputs should be connected to the first master speaker, which will also set the volume and tone of both speakers.

- Link In: Use this setting for the second speaker of a Smart Stereo(TM) pair. The audio from the LINK IN will be routed directly to the power amp and speaker, with all other inputs and controls being ignored. This can also be used to accept mono audio from a previous speaker, with that previous speaker determining volume and tone.

11

OUT JACK

Configured by 10

switch

- Mono: sends out mono audio

- Stereo Master: sends out right audio, for second speaker’s LINK IN

- Link In: sends out the same audio received at the LINK IN jack

12

LINK IN JACK

Activated only when 10

switch is set to LINK IN

13

FRONT LED SWITCH

- On: Front LED is lit white when power is on

- On/Limit: LED lights red when limiter is active, and otherwise is lit white

If limiter is continuously or frequently active, turn down Channel 1, 2 or 3 knobs to reduce volume

14

Connect power cable here.

15

If the speaker will not power on and you suspect its fuse may have blown, turn off the power switch, and open the fuse compartment using a small flat blade screwdriver. If metal strip in fuse is broken, replace with T5AL

250V fuse.

16

Switches the power on and off

V2300 SERIES OWNER’S MANUAL

V2318S QUICK START GUIDE

SETTING UP / HELPFUL TIPS

• Position the VARI speaker in the desired location, and ensure the speaker is stable.

• Make sure the Power Switch is off.

• Make certain Level knob is turned down.

MAKING THE CONNECTIONS

• Plug connections to Input 1 and 2 from Outputs of signal source.

POWERING UP

• Turn on the power to any devices plugged into Input 1 or Input 2.

• Power ON the speaker.

• Slowly turn the Level knob to 12 o’clock.

• Slowly turn up the source volume to the desired level.

SIGNAL/LIMIT

• The SIGNAL/LIMIT LED will light up WHITE when the speaker is receiving a signal. If the limiter is triggered, the LED will turn RED and the MASTER

VOLUME should be turned down.

LINKING MULTIPLE SUBWOOFERS

• If linking multiple subwoofers, plug the Line Output connection of the first subwoofer to the INPUT connection of second subwoofer, and continue the daisy chain to the next speaker.

• Switch Output Crossover Off.

• Turn the Power On in the order of the audio signal to prevent unwanted

“pops”. First On / Last Off.

HOOK UP DIAGRAMS

SMART STEREO

™

WITH VARI V2318S

To operate a pair of VARI V2312 or V2315 speakers in Smart Stereo™ along with VARI V2318S sub(s):

• Connect your main stereo audio source directly to VARI V2318S inputs

• Set V2318S OUTPUT crossover to 120Hz

• Connect VARI V2318S OUTPUT 1 to Channel 3 LEFT(MONO) input on first V2312 or V2315 (this is the speaker you have set up as the Stereo

Master unit)

• Connect VARI 2318S OUTPUT 2 to Channel 3 RIGHT input on that same speaker

• Note that volume for the V2318S is set from its own knob, it is not affected by the Stereo Master unit’s volume

• Note that you can use the other inputs on the Stereo Master unit, but they will not be routed through the sub

V2300 SERIES OWNER’S MANUAL

6

3

V2318S BACK PANEL

4

2

1

6 7

5 8

9 10 11

1

INPUTS 1 AND 2

These combo inputs are designed for either TRS or XLR balanced plugs at line level, either from a mixer or another speaker. The source can be either mono or stereo.

2

OUTPUTS 1 AND 2

These outputs feed through the signal(s) received from the input(s). If the crossover is not switched off, the output signal(s) will be altered by the crossover, which removes audio below the selected frequency, to allow your speakers that are fed by the sub to focus all their energy and fidelity on reproducing signals above the selected frequency.

3

OUTPUT CROSSOVER

This switch controls the high precision DSP crossover. Select 120Hz or

90Hz to have the audio below the selected frequency filtered out of the output signals. Select Off to disable the crossover, and output the same full range audio received at the outputs.

4

PHASE

This switch lets you “flip” (reverse) the phase on the power amp 180 degrees when needed to match the polarity of speakers that may operate with opposite polarity to the V2318S, or to account for a phase difference due to the physical distance between the sub and the full range speakers it is operating with. When set to 0, phase is uneffected. When set to 180, the phase of the power amp and internal speaker will be reversed.

5

FRONT LED

- ON: front LED lights white when power is on.

- ON/L: front LED lights red when limiter is triggered, and otherwise is lit

white when power is on.

- OFF: front LED is disabled.

6

POWER LED

Lights when power is on.

7

SIGNAL/LIMIT LED

Lights white when the speaker is receiving signal, and red when the limiter is triggered. If the limiter is triggered continuously, the 8 should be turned down.

Level knob

8

LEVEL KNOB

Sets volume of internal speaker.

9

IEC POWER INPUT

Plug in the IEC AC cable here.

10

FUSE CARRIER

If the speaker will not power on and you suspect its fuse may have blown, turn off the power switch, and open the fuse compartment using a small flat blade screwdriver. If metal strip in fuse is broken, replace with T6.3AL

250V fuse.

11

POWER SWITCH

Turns the VARI subwoofer on or off.

7

V2300 SERIES OWNER’S MANUAL

HARBINGER VARI Series

Amplifier

Speaker

Dimensions and

Weights

DSP

Limiter

Smart Stereo

Input 1

Input 2

Input 3

Link In

Out Jack

Power Output

Bass EQ Knob

Treble EQ Knob

Volume

Power Input

Features

Type

Frequency Response

Max SPL@1M

HF Driver

LF Driver

Cabinet

Grille

Suspension Points

Pole Mount

Product Dimensions

Packaging Size

Net Weight

Gross Weight

V2312/V2315 SPECIFICATIONS

V2312

Selectable Voicing (Standard, Vocal Boost, Live, Floor

Monitor/Wall) and Bass and Treble knobs all control the internal DSP to customize the sound

Transparent, dynamic DSP limiter for ideal sound quality and system protection at maximum volume

A pair of speakers can be connected for unified volume and tone control from the first master speaker, with optimal distribution of mono and audio signals between both speakers

XLR and 1/4-inch TRS balanced/unbalanced compatible audio input with Mic/Guitar/Line Switch and Input Gain Control

XLR and 1/4-inch TRS balanced/unbalanced compatible audio input with Mic/Guitar/Line Switch and Input Gain Control

Stereo Line: Left/mono and right 1/4-inch TRS balanced/unbalanced compatible audio line inputs

Aux: 1/8-inch mini TRS unbalanced input (-10dB)

Bluetooth Audio: with On/Pair and Off buttons plus LED

V2315

Selectable Voicing (Standard, Vocal Boost, Live, Floor

Monitor/Wall) and Bass and Treble knobs all control the internal DSP to customize the sound

Transparent, dynamic DSP limiter for ideal sound quality and system protection at maximum volume

A pair of speakers can be connected for unified volume and tone control from the first master speaker, with optimal distribution of mono and audio signals between both speakers

XLR and 1/4-inch TRS balanced/unbalanced compatible audio input with Mic/Guitar/Line Switch and Input Gain Control

XLR and 1/4-inch TRS balanced/unbalanced compatible audio input with Mic/Guitar/Line Switch and Input Gain Control

Stereo Line: Left/mono and right 1/4-inch TRS balanced/unbalanced compatible audio line inputs

Aux: 1/8-inch mini TRS unbalanced input (-10dB)

Bluetooth Audio: with On/Pair and Off buttons plus LED

XLR balanced +4dBv audio input XLR balanced +4dBv audio input

XLR balanced +4dBv audio output

2000 Watts Peak

+/-12dB Shelf, 100Hz

+/-12dB Shelf at 10kHz volume control per channel

115V/60 Hz

Removable AC Power Cord

Front LED, configurable to indicate power or power/ limiter

Voicing button and 4 voicing indicator LEDs

12˝ 2-way vented design

40-20K Hz

126dB

Compression Driver, 8 Ohm

12˝ Driver, 4 Ohm

Polypropolene, with rubber surfaced handles and feet

1.2mm steel

V2312 Is Not Designed For Suspension

35mm stand pole with M6 screw

14.2” x 14.2” x 24.1”

18.1” x 18.1” x 28.1”

35 pounds

45 pounds

XLR balanced +4dBv audio output

2000 Watts Peak

+/-12dB Shelf, 100Hz

+/-12dB Shelf at 10kHz volume control per channel

115V/60 Hz

Removable AC Power Cord

Front LED, configurable to indicate power or power/ limiter

Voicing button and 4 voicing indicator LEDs

15˝ 2-way vented design

40-20K Hz

127dB

Compression Driver, 8 Ohm

15˝ Driver, 4 Ohm

Polypropolene, with rubber surfaced handles and feet

1.2mm steel

V2315 Is Not Designed For Suspension

35mm stand pole with M6 screw

16.5” x 15.0” x 27.1”

20.1” x 19.5” x 31.1”

41 pounds

50 pounds

V2300 SERIES OWNER’S MANUAL

8

HARBINGER VARI Series

Amplifier

Speaker

Dimensions and Weights

V2318S

Inputs

Outputs

Power Output

Volume

Power Input

Features

V2318S SPECIFICATIONS

Type

Frequency Response

Max Output SPL@1M

Impedance

Woofer

Cabinet

Grille

Pole

Features

Unit Size

Package Size

Unit Weight

Package Weight

2 XLR / TRS LINE input

2 XLR line output

600 watts RMS @ 8 Ohms / 2400 watts Peak

Main volume control

100-120 Volt ~60Hz 500W power draw

Class D+ switching power design

Defeatable front LED with selectable power/limiter indication

Rear panel power and signal/clip LEDs

High precision digital crossover

Transparent, dynamic DSP limiter

Active vented subwoofer

35-150Hz

134dB

8 Ohm

18˝ subwoofer

Plywood with black Polyurea painted finish

1.5mm steel

35mm stand pole

Rubber corner edge protection

(4) Easy-roll, lockable, rotating 3-inch casters

24.4 x 20.5 x 26.0 inches (without casters)

28.3 x 24.4 x 32.1 inches

86 pounds

99 pounds

9

V2300 SERIES OWNER’S MANUAL

IMPORTANT SAFETY INSTRUCTIONS

Please keep this instruction manual for future reference and for the duration of owning the VARI powered loudspeaker. Please carefully read and understand the instructions inside this owner’s manual before attempting to operate your new powered loudspeaker.

This instruction manual includes essential safety information regarding the use and maintenance of the amplifier. Take special care to heed all warning symbols and signs inside this manual and those printed on the amplifier on the back of the loudspeaker.

WARNING

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE AMPLIFIER

TO WATER/MOISTURE, NOR SHOULD YOU OPERATE THE AMPLIFIER

NEAR ANY WATER SOURCE.

The exclamation point triangular symbol is intended to alert the user to the presence of important operating and maintenance(servicing) instructions in the user manual accompanying the Amplifier.

The lightning flash with an arrow triangular symbol is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure, and may be of sufficient magnitude to constitute a risk of electric shock.

WARNING

Handle the power supply cord with care.

Do not damage or deform it as it may cause electric shock or malfunction when used. Hold the plug attachment when removing from wall outlet. Do not pull on the power cord.

IMPORTANT SAFETY PRECAUTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15. POWER SOURCES – This product should be operated only from the type of power source indicated on the rating label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company.

16. WALL OR CEILING MOUNTING – The product should never be mounted to a wall or ceiling.

17. Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

18. OBJECT AND LIQUID ENTRY – Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.

19. Water and Moisture: This product should be kept away from direct contact with liquids. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

20. Keep the speaker system out of extended or intense direct sun light.

21. No containers filled with any type of liquid should be placed on or near the speaker system.

22. SERVICING – The user should not attempt any service to the speaker and/or amplifier beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel.

23. VENTILATION – Slots and openings in the amplifier are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack.

4. Follow all Instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. DO NOT turn on the VARI amplifier module before connecting all other external devices.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at

SHOCK DO NOT REMOVE COVER (OR BACK) NO plugs, convenience receptacles, and the point where they exit from the

SERVICING TO QUALIFIED PERSONAL apparatus.

11. Only use attachment/accessories specified by the manufacturer.

12. Use only the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

connected to a main socket outlet with a protective earthing connection.

25. ACCESSORIES – Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product.

26. When moving or not using the appliance, secure the power cord (e.g., wrap it with a cable tie). Be careful not to damage the power cord.

Before using it again, make sure the power cord has not been damaged.

If the power cord has been damaged at all, bring the unit and cord to a qualified service technician for repair or replacement as specified by the manufacturer.

27. LIGHTNING – For added protection during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the product due to lightning and power-line surges.

28. REPLACEMENT PARTS – When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock, or other hazards.

V2300 SERIES OWNER’S MANUAL

10

IMPORTANT SAFETY INSTRUCTIONS

To prevent electric shock, do not use a polarized plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.

RISK OF

ELECTRIC SHOCK

DO NOT OPEN

ELECTRIC SHOCK

DO NOT OPEN

RISQUE DE CHOC

ELECTRIQUE NE

PAS OUVRIR

ELECTRIQUE NE

PAS OUVRIR

RISK OF

ELECTRIC SHOCK

DO NOT OPEN

CAUTION: To reduce the risk of electric shock, do not

RISQUE DE CHOC

ELECTRIQUE NE

PAS OUVRIR

à l’humidité.

CAUTION: To reduce the risk of electric shock, do not remove chassis. No user-serviceable parts inside.

Refer servicing to qualified service personnel.

d’électrocution, ne pas exposer ce matérial à la pluie ou

AVERTISEEMENT: Pour réduire les risques d’incendie et d’électrocution, ne pas exposer ce matérial à la pluie ou

à l’humidité.

HEARING DAMAGE AND PROLONGED EXPOSURE TO

EXCESSIVE SPLs

Harbinger VARI Series powered loudspeakers are capable of producing extremely loud volume levels that can cause permanent hearing damage to performers, production crews or the audience. Hearing protection is recommended during long-term exposure to high SPLs (sound pressure levels).

Remember, if it hurts, it is definitely too loud! Long term exposure to high SPLs first causes temporary threshold shifts; limiting your ability to hear the actual loudness and exercise good judgment. Repeated long term exposure to high

SPLs will cause permanent hearing loss.

Please note the recommended exposure limits in the accompanying table.

More information about these limits is available on the US government

Occupational Safety and Health (OSHA) website at: www.osha.gov.

Permissible Noise Exposures (1)

THIS SYMBOL IS INTENDED TO ALERT THE USER TO THE PRESENCE

OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING)

INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE UNIT.

APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING

AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES,

SHALL BE PLACED ON THE APPARATUS.

Duration per day, hours

3

2

1.5

1

8

6

4

0.5

0.25 or less

Sound level dBA slow response

90

92

95

97

100

102

105

110

115

FCC STATEMENTS

1. Caution: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

2. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

WARNING: To reduce the risk of fire or shock do not expose this equipment to rain or moisture.

AVERTISEEMENT: Pour réduire les risques

AVERTISEEMENT: Pour réduire les risques d’incendie et d’électrocution, ne pas exposer ce matérial à la pluie ou à l’humidité.

RISK OF

WARNING: To reduce the risk of fire or shock do not expose this equipment to rain or moisture.

DO NOT OPEN

RISQUE DE CHOC

ELECTRIQUE NE

PAS OUVRIR

PAS OUVRIR

AVERTISEEMENT: Pour réduire les risques d’incendie et d’électrocution, ne pas exposer ce matérial à la pluie ou à l’humidité.

11 interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

V2300 SERIES OWNER’S MANUAL

RISK OF

ELECTRIC SHOCK

DO NOT OPEN

RISQUE DE CHOC

ELECTRIQUE NE

PAS OUVRIR

WARRANTY/CUSTOMER SUPPORT

2 YEAR HARBINGER LIMITED WARRANTY

Harbinger provides, to the original purchaser, a two (2) year limited warranty on materials and workmanship on all Harbinger cabinets, loudspeaker and amplifier components from the date of purchase.

For warranty support, please visit our website at www.HarbingerProAudio.

com , or contact our Support Team at 888-286-1809 for assistance. Harbinger will repair or replace the unit at Harbinger’s discretion.

This warranty does not cover service or parts to repair damage caused by neglect, abuse, normal wear and tear and cosmetic appearance to the cabinetry not directly attributed to defects in materials or workmanship. Also excluded from coverage are damages caused directly or indirectly due to any service, repair(s), or modifications of the cabinet, which has not been authorized or approved by Harbinger. This two (2) year warranty does not cover service or parts to repair damage caused by accident, disaster, misuse, abuse, burnt voice-coils, over-powering, negligence, inadequate packing or inadequate shipping procedures.

The sole and exclusive remedy of the foregoing limited warranty shall be limited to the repair or replacement of any defective or non-conforming component. All warranties including, but not limited to, the express warranty and the implied warranties of merchantability and fitness for a particular purpose are limited to the two (2) year warranty period. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you. There are no express warranties beyond those stated here. In the event that applicable law does not allow the limitation of the duration of the implied warranties to the warranty period, then the duration of the implied warranties shall be limited to as long as is provided by applicable law. No warranties apply after that period.

Retailer and manufacturer shall not be liable for damages based upon inconvenience, loss of use of product, loss of time, interrupted operation or commercial loss or any other incidental or consequential damages including but not limited to lost profits, downtime, goodwill, damage to or replacement of equipment and property, and any costs of recovering, reprogramming, or reproducing any program or data stored in equipment that is used with

Harbinger products. This guarantee gives you specific legal rights; you may have other legal rights, which vary from state to state.

Harbinger

P.O. Box 5111, Thousand Oaks, CA 91359-5111

All trademarks and registered trademarks mentioned herein are recognized as the property of their respective holders.

1901-18333938

V2300 SERIES OWNER’S MANUAL

12