GAO 552446 Operating Instructions
Add to My manuals3 Pages
GAO 552446 is a digital day switch time with light. It can be operated and programmed via buttons and a LC display. The product should be connected to an earthed mains socket; the mains voltage should be 230 V/AC, 50 Hz. The power consumption of the device connected to the socket of the weekday timer switch may not exceed 3680 W. It has a child lock, and it's not a toy and must be kept out of the reach of children. It can be used in dry, enclosed indoor areas and must not get damp or wet. It's important to not overload the weekday timer switch and observe the maximum connected load.
advertisement
![GAO 552446 Operating Instructions | Manualzz GAO 552446 Operating Instructions | Manualzz](http://s3.manualzz.com/store/data/065089813_1-4d2504f9410e60f060c2a228d5115480-360x466.png)
Operating instructions
Digital day switch timer with light
Intended use
The product is equipped with a power outlet which can be switched on and off via the integrated timer. It can be operated and programmed via buttons and a LC display.
As a special feature, a blue backlight, which is used not only for better readability of the display, but can also be used as a night light, can be activated for the LC display.
The product should be connected to an earthed mains socket; the mains voltage should be
230 V/AC, 50 Hz.
The power consumption of the device connected to the socket of the weekday timer switch may not exceed 3680 W.
The product may only be used in dry, enclosed spaces.
Always observe the safety instructions included in these operating instructions. Read the operating instructions thoroughly before using the product. Keep the operating manual for later reference or pass it on to other users of the weekday timer switch.
Any use, other than the one described above, may damage the product. Moreover, this involves hazards such as e.g. short circuit, fi re, electric shock, etc. It is not allowed to modify or rebuild any part of the product!
This product complies with the applicable national and European requirements. All names of companies and products are the trademarks of the respective owner. All rights reserved.
Explanation of Symbols, Inscriptions
This symbol indicates a health hazard, e.g. electric shock.
The exclamation mark indicates speci fi c risks associated with handling, function and use.
☞
The “Hand“ symbol indicates special tips and operating information.
The product is only intended to be placed and used in dry, enclosed indoor areas; it must not get damp or wet.
Contents
Safety Instructions
The warranty will be void in the event of damage caused by failure to observe these safety instructions! We do not assume any liability for any consequential damage!
We do not assume any liability for material and personal damage caused by improper use or non-compliance with the safety instructions. The warranty will be void in such cases!
a) General instructions
The unauthorised conversion and/or modi fi cation of the product is not permitted for safety and approval reasons (CE). Do not open/disassemble! Contains no customer-serviceable parts.
Maintenance or repair works must always be carried out by quali fi ed experts who are familiar with the hazards involved and with the relevant regulations.
The device is designed according to safety class I. It may only be used when connected to an earthed mains socket.
The power outlet of the weekday timer switch is equipped with a child lock. Only when the prongs of a power plug are placed in both openings of the socket at the same time will the mechanism release the opening.
Even so, be especially careful if children are around. Children cannot see the dangers arising from the incorrect use of electrical devices. There is a risk of a life-threatening electric shock!
The product is not a toy and must be kept out of the reach of children. Position the product so it is out of the reach of children.
Do not carelessly leave the packaging material lying around since this may become a dangerous toy for children.
Handle the product with care, it can be damaged by impacts, blows, or accidental drops, even from a low height.
b) Operation
The product may be used only in dry, enclosed indoor areas; it must not get damp or wet! Never place the product in direct vicinity of a bathroom, shower, bathtub or the like. Lethal hazard due to electric shock!
Never plug in or unplug the plug-in power unit with damp or wet hands. There is a risk of a life-threatening electric shock!
The product must not be exposed to extremes of temperature, direct sunlight or strong vibrations.
Do not operate the device in environments where there are high levels of dust, fl ammable gases, vapours or solvents. There is a danger of fi re and explosion!
Never connect the product to the power supply immediately after it has been transferred from a cold room into a warm one (e.g. during transport). The condensation that develops in such cases could damage the device or cause an electric shock!
Allow the product to reach room temperature. Wait until the condensation has evaporated. This might take several hours. Only after this should the product be plugged in to the power supply and put into use.
Ventilators, heaters, heat fans or heaters with open elements should never be left unattended. We recommend that you do not connect such devices to the weekday timer switch. Fire hazard!
Always pull the plug of a device connected to the weekday timer switch out of its socket only at the appropriate gripping surfaces; never pull the plug out by the fl ex!
Do not overload the weekday timer switch. Observe the maximum connected load in the chapter “Technical Data”.
Do not connect in series! This can lead to overloading of the weekday timer switch!
Fire hazard!
Do not operate while covered! At higher connected loads, the weekday timer switch becomes warm, which can lead to overheating and potentially a fi re if covered!
Current-free only when the plug is withdrawn! Pull the weekday timer switch out of the mains outlet.
Do not use the product if it is damaged. There is a risk of a life-threatening electric shock!
In this case, dispose of the product in an environmentally correct manner.
A safe operation can no longer be assumed, if:
- the product shows visible signs of damage,
- the product does not work at all or works poorly (leaking smoke or a smell of burning, audible cracking noises, discolouration to the product or the adjacent surfaces)
- the product was stored under unfavourable conditions
- it was exposed to heavy loads during transport
Always pull the weekday timer switch out of the mains socket before cleaning it or when the device will not be in use for a long time.
Only use the device in a temperate climate, never in a tropical climate.
Never pour any liquids above or next to the product. It can cause fi re or perilous electric shock danger. If any liquid has still managed to enter the device, immediately turn off the power supply to the mains socket at which the weekday timer switch is connected (turn off the fuse / circuit breaker / residual current operated circuit breaker of the associated circuits). Only then can you unplug the weekday timer switch from the mains socket and contact a specialist. Do not use the product anymore.
In commercial institutions, the accident prevention regulations of the employer’s liability insurance association for electrical systems and operating facilities are to be observed!
If you have any questions that are not answered in this manual, please contact the seller of the weekday timer switch or another specialist.
Getting Started, Use
Follow the safety instructions and the other information in this operation manual.
Plug the weekday timer switch into a regular earthed mains socket (wall socket).
☞
Upon delivery, the internal NiMH battery securing the settings in case of power cut
(or when plugging the weekday switch timer) is empty.
The power supply for the LCD display is buffered with the NiMH, which can result in non-optimal display contrast after start-up. After about 1-2 hours, the NiMH battery should be charged to the extent that the display contrast has become normal.
The NiMH battery is fully charged after about 20 hours; when unplugging the weekday timer switch from the mains voltage (e.g. during storage), the settings / programming is maintained at full charge for about max. 10 months.
Setting the time
fl y press the “MENU” button several times, until the desired time function appears.
☞ Important
Always set the winter time (even during summer). Summer time can then be activated by pressing the respective button, see next chapter “Switching between summer and winter time”.
fl ashes on the top of the display.
fl y press the “OK” button.
fl ashing; set the hours with the “+1” or “-1” button (keep the respective button pressed down for quick setting).
Press the “OK” button brie fl y to con fi rm.
fl ashing; set the minutes with the “+1” or “-1” button (keep the respective button pressed down for quick setting). Every time when the minutes are set, the seconds are simultaneously reset to “00”.
Press the “OK” button brie fl y to con fi rm and the day of the week starts fl ashing again.
fl y press the “MENU” button to complete the setting mode.
Switching between summer and winter time
fl y press the “MENU” button several times, until the desired time function appears.
fl y e.g. with a toothpick. This will switch between summer and winter time
☞
When summer time is activated, “+1” will appear at the bottom of the display.
Keep in mind that the switch on/off times are delayed when summer time is activated. That means that the device is switched on and off at the programmed times
(winter time) and not at the time displayed by the clock (summer time).
Programming of switching on/off times
fl y press the “MENU” button when the time is displayed.
The rst switch on time of the fi rst program group appears in the display, “PROG” is shown in the bottom left of the display and “1 ON” fl ashes (switch on time for program group 1).
☞
A program group always consists of a switch on time and a switch off time that must be programmed one after the other.
If you have only programmed a switch on time by accident, the connected device will not be switched off until another program group is activated.
Therefore you should always program the switch on time fi rst and then the respective switch off time (e.g. for program group “1 ON”: Switch on at 07:00, program group “1 OFF”: Switch off at 08:00)
and “OFF” for switch off time.
switch on/off times. For a quick adjustment, hold the corresponding button for a longer period of time.
1 ON <-> 1 OFF <-> 2 ON <-> 2 OFF........16 ON <-> 16 OFF <-> 1 ON <-> .....
left of the display, brie fl y press the “OK” button.
tended now fl ashes in the top of the display. Select the desired combination (or an individual day) using the “+1” or “-1” button. Quick adjustment is possible by keeping the respective button “+1” or “-1” pressed for a longer period of time.
MO TU WE TH FR SA SU Each day of the week, Monday to Sunday
MO > TU > WE > TH > FR > SA > SU Individual day
MO WE FR Monday, Wednesday and Friday
TU TH SA
SA SU
MO TU WE
Tuesday, Thursday, Saturday
Saturday, Sunday
Monday, Tuesday, Wednesday
TH FR SA
MO TU WE TH FR
Thursday, Friday, Saturday
Monday to Friday
MO TU WE TH FR SA Monday to Saturday
☞
The abbreviations stand for the following days:
(MO = Monday, TU = Tuesday, WE = Wednesday, TH = Thursday, FR = Friday,
SA = Saturday, SU = Sunday
fi rm the selection of the day of the week (or a combination of weekdays) by brie fl y pressing the “OK” button.
fl ashing; set the hours with the “+1” or “-1” button (keep the respective button pressed down for quick setting).
fl ashing; set the minutes with the “+1” or “-1” button (keep the respective button pressed down for quick setting).
fl ashes again.
☞ Press the “MENU” button 2x brie time display.
fl y to leave the program mode and to return to the
Choose operating mode
fl y press the “MENU” button several times, until the desired time function appears.
fl y several time (and pressing the hand symbol), the desired operating mode can be selected.
The operating mode is shown at the bottom of the display.
“ON” Mains socket/device is switched on
“OFF”
“AUTO ON”
Mains socket/device is switched off
Automatic operation is activated, the mains socket or the device remains switched on until the switching program switches them off again.
“AUTO OFF” Automatic operation is activated, the mains socket or the device remains switched off until the switching program switches them on again.
Deactivating/activating a program group
You can temporarily deactivate a program group you previously set, e.g. during holidays. The settings will be kept but the switching program is no longer executed.
With this function, different switching scenarios can be programmed and selected when desired without having to re-programme.
Proceed as follows:
fl y press the “MENU” button when the time is displayed.
The rst switch on time of the fi rst program group appears in the display, “PROG” is shown in the display and “1 ON” fl ashes (switch on time for program group 1).
switch on/off times. For a quick adjustment, hold the corresponding button for a longer period of time.
1 ON <-> 1 OFF <-> 2 ON <-> 2 OFF........16 ON <-> 16 OFF <-> 1 ON <-> .....
fl y press the counter-sunk “RCL” button using a toothpick.
The following appears on the display: “- - : - -”.
The switch on time or switch off time of the program group is deactivated and will not be carried out (a programmed on/off time will not be deleted, however – only the execution of the switching program is deactivated).
Use the “+1” or “-1” button to select one program group after another and their respective switch on/off times.
☞
Note:
Always deactivated the switch off time (e.g. “5 ON”) as well as the switch off time
(“5 OFF”) of the respective program group.
If a deactivated program group ("- - : - -") is to be re-activated, go to the program mode as described above and select the desired program group using the “+1” or “-1” button. Then, press the counter-sunk "RCL" button brie fl y with a toothpick.
Then “- -: - -” will disappear and the day of the week re-appears as well as the time for the switch on and switch off time of the respective program group.
☞ Press the “MENU” button 2x brie time display.
fl y to leave the program mode and to return to the
Countdown Mode
In the countdown mode, a time of maximal 99 hours, 59 minutes, 59 seconds can be set.
Depending on the operating mode of the weekday switch timer, the device is switched off or on after the timer has counted down.
☞ Operating mode “ON” or “AUTO ON” (mains socket/device is switched connected device is switched off after the timer has counted down on ): The
Operating mode “OFF” or “AUTO OFF” (mains socket/device is switched off ): The connected device is switched on after the timer has counted down
When the countdown mode was started, all automatic switching programs are deactivated for the duration of the countdown! That means that the device is not switched on or of at the times and weekdays programmed in the program group until the timer has counted down.
Setting the timer and start of the countdown timer:
right and the hours of the timer fl ash “0:00:00”.
Maintenance and Cleaning
cing. Therefore, do not open/dismantle it. Maintenance or repairs may only be performed by quali fi ed personnel or a specialised repair shop. pull it completely out of the mains socket (the wall socket). All settings are saved due to the integrated NiMH battery.
scratches and could also cause damage to the display and touchscreen!
Do not use abrasive cleaning agents, cleaning alcohol or other chemical solutions, since these could damage the housing or even impair operation.
Disposal
Dispose of the unserviceable product according to the relevant statutory regulations!
pressed down for quick setting).
Press the “OK” button brie fl y to con fi rm.
fl ashing; set the minutes with the “+1” or “-1” button (keep the respective button pressed down for quick setting).
Press the “OK” button brie fl y to con fi rm.
fl ashing; set the seconds with the “+1” or “-1” button (keep the respective button pressed down for quick setting).
fl y.
it is switched on or off.
☞
When the weekday switch timer is in “ON” or “AUTO ON” mode (socket/device is switched on), the connected device is switched off when the timer has counted down.
When the weekday switch timer is in “OFF” or “AUTO OFF” mode (socket/device is switched off), the connected device is switched on when the timer has counted down.
Early termination of the countdown timer: the timer is shown in the display.
☞
The countdown timer cannot be reset as long as the weekday switch timer shows the time or the programmed switching times!
fl y e.g. with a toothpick.
The countdown timer is then reset to “0:00:00”, the hours of the timer fl ash again (you can now set a new time and restart the countdown timer as described above).
fl y to leave the setting mode and to return to the time display.
Alternatively, do not press any button for 2 minutes.
This deactivates the countdown timer and the weekday switch timer continues with its normal switching program.
Random function
With the random function, the set switch on/off times are delayed by 4 to 32 minutes.
☞ The random function can only be used for program times of the program groups, but not for the countdown timer.
To turn the random function on or off, press the “-1” button brie fl y.
When the random function is turned on “RND“ is fl ashing on the bottom right in the display.
Reset
In order to reset the weekday switch timer to the factory settings and to delete all programming, keep the countersunk “RST” button pressed for several seconds. All display segments are shown in the display, then the weekday switch timer is ready for operation.
☞ Note:
All settings and programming are lost upon reset!
Activating the lighting of the LC display/night light function
Use the “ ” button to switch the display light on or off.
The light can also be used as night light due to its large size and brightness.
Technical Data
Operating voltage ................. 230 V/AC, 50 Hz
Switching capacity ................ max. 3680 W
Protection class .................... I
Model: ................................... Relay; 1-pole disconnection
Child-proof lock ..................... yes, integrated in socket
Switch times per day ............ 16 on/off programs
Shortest switching duration .. 1 min
Countdown timer .................. 1 min to a max. of 99 h, 59 min, 59 s
Data storage ......................... with an internal NiMH battery (max. approx. 10 months with fully charged battery)
Ambient temperature ............ 0 °C to +40 °C
Ambient humidity .................. 0% to 90% relative humidity, not condensing
Dimensions ........................... 70.5 x 132 x 37 mm (W x H x D, without plug)
Weight .................................. 200 g
advertisement