PESA PRO-HD2HDMI User manual

PRO-HD2HDMI

SDI/3G-HD-SD to HDMI Converter

User Manual

Made in Taiwan rev.1008

103 Quality Circle, Suite 210 | Huntsville, Alabama 35806 | Tel: (256) 726-9222 | Fax: (256) 726-9268 | Email: [email protected]

Safety and Notice

The PRO-HD2HDMI SDI/3G-HD-SD to HDMI Converter has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the PRO-HD2HDMI should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. z Follow all instructions and warnings marked on this unit. z Do not attempt to service this unit yourself, except where explained in this manual. z Provide proper ventilation and air circulation and do not use near water. z Keep objects that might damage the device and assure that the placement of this unit is on a stable surface. z Use only the power adapter and power cords and connection cables designed for this unit. z Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.

Warranty Information

PESA Switching Systems, Inc., (PESA) warrants this equipment against defective workmanship or materials for a period of one (1) year from date of shipment. The sole warranty responsibility of PESA, shall be to replace or repair product proved to be defective. During the warranty period, defective parts will be replaced at no charge. Labor to repair or replace defective parts covered under the warranty will be performed at no charge at PESA. This warranty covers only products manufactured by PESA, and the components used in their manufacture. The warranty on assembled products sold by PESA., but manufactured by others shall be that of the original manufacturer. This warranty does not include shipping damage or damage caused by abuse, neglect, tampering by unauthorized personnel, damage inadvertently caused by the user, preventative maintenance, or any equipment or part thereof whose serial number has been removed or defaced. Neither the seller nor the manufacturer shall be liable for any injury, loss or damage, direct or consequential, arising out of the inability to use the product. Before using, user shall determine the suitability of the product for the intended use, and user assumes all risk and liability whatsoever in connection therewith. This warranty is effective only at the PESA factory in Huntsville, Alabama, USA. If possible, retain the original packing material for use in the unlikely event that your equipment must be returned to the PESA factory. When shipping your equipment, the shipping charges must be prepaid. The repaired unit will be returned to you, freight prepaid. This warranty is exclusive and in lieu of all other warranties, whether expressed or implied, including the implied warranties of merchantability and fitness for a particular purpose.

INTRODUCTION

The PRO-HD2HDMI SDI/3G-HD-SD to HDMI Converter provides a cost effective way to convert 3G/HD/SD-SDI signal to HDMI compliant format. The conversion between SDI and

HDMI is pure digital and guarantees no loss transformation for both audio and video. Plus, with up to 8 channels audio support, 7.1 channel or 5.1 channel audio becomes available. The

PRO-HD2HDMI also provides 2 low jitter and re-clocked outputs for daisy chain or multiple monitors.

Features

z Supports 3G-SDI formats(SMPTE 425M, Level A): 1080p @50/59.94/60Hz (4:2:2) z Supports high-definition (HD-SDI) formats: 1080i @50/59.94/60Hz, 720p @50/59.94/60Hz z Supports standard-definition (SD-SDI) formats: NTSC @59.94Hz, PAL @50Hz z Auto 3G/HD/SD-SDI detection z HDMI founder Silicon Image chipsets embedded for superior compatibility and reliability z Easy installation with wall mounting design z External DIP switch configuration

~ 1 ~

Specifications & Package Contents

Model Name

Technical

Role of usage

SDI standards

Auto 3G/HD/SD-SDI detection

Video bandwidth

Video support

Input signal

Output signal

Audio mode

Synchronization mode

Eye pattern characteristics

Cable equalization

Loop-out

Audio support

PCB stack-up

PRO-HD2HDMI

Format converter

3G-SDI, HD-SDI & SD-SDI

Yes

2.970 Gbps & 2.970/1.001 Gbps

[3G] – 1080p50/59.94/60 (4:2:2)

[HD] – 720p @50/59.94/60Hz, 1080i @50/59.94/60Hz,

1080p @24/30Hz

[SD] – NTSC @59.94Hz, PAL @50Hz

[SD] SMPTE 259M; [HD] SMPTE 292M & 296M;

[3G-SDI] SMPTE 424M & 425M

HDMI

7.1ch / 5.1ch / Stereo

Internal synchronization or external synchronization

Extra low alignment jitter 0.05UI at HD

[3G] up to 200ft; [HD] up to 500ft; [SD] up to 1000ft

2 equalized and reclocked SDI loop-outs

Yes

4-layer board (impedance control

− differential 100Ω; single 50Ω)

Output

HDMI connector

BNC connector

DIP switch

Mechanical

1x HDMI + 2x SDI

Type A (19-pin female)

3G 75

Ω inter-locked socket

4-pin mode selection

Dimensions

L x W x H

Model

Package

Weight Model

Fixedness

Power supply

Power consumption

Operation temperature

Storage temperature

Relative humidity

Package Contents

6.9”x4.7”x1” / 175 x 120 x 25mm

6.9”x10.4”x3” / 174 x 264 x 77mm

1.1 lbs / 515g

Wall mounting and latch-locking power jacks

5V 2A DC

1 Watt (max)

32-104

°F / 0-40°C

-4-140

°F / -20-60°C

20-90% RH (no condensation)

1x PRO-HD2HDMI

1x 5V power supply unit

1x User manual

~ 2 ~

Input Panel

PANEL DESCRIPTION

SDI/HD-SD INPUT: Plug in a coaxial cable to be linked to one SDI source device.

Signal LED: Indication of the existence of SDI signal

SDI/HD-SD OUTPUT: Plug in a coaxial cable to be linked to one SDI local device

Output Panel

HDMI OUTPUT: Connect a HDMI male-male cable to be linked to one HDMI device.

+5V DC: Connect to a 5V DC latch-locking power supply unit.

~ 3 ~

Bottom Panel

A 4-pin DIP switch is used for user interface, and users can access this switch from the bottom of the unit.

Pin No. 1 2 3 4

ON (½) DVI mode Stereo Audio group 3&4 Audio mute on

OFF (¾) HDMI mode

Notice

7.1ch Audio group 1&2

1. Factory default for 4-pin DIP: OFF-OFF-OFF-OFF (¾¾¾¾)

Audio mute off

2. The PRO-HD2HDMI mainly checks the audio channel in audio group 1&2 or 3&4. Please adjust DIP switch pin-3 beneath the device for setup.

3. Some HDMI enabled TV may not be able to decipher multiple channel audio. If so, please set the DIP switch pin no.1 to ON(½) first to check if the audio output is normal then check if the multiple audio channel support is available.

4. The PRO-HD2HDMI supports audio sample frequency at 48kHz only.

5. When the stereo audio mode is chosen, either Channel 1 & Channel 2 of audio group 1 or audio group 3 are the audio output.

INSTALLATION

Connection Diagram

SDI

SDI

SDI Cable

HDMI Cable

PRO-HD2HDMI

HDMI

~ 4 ~

SUPPORTED RESOLUTIONS

3G-SDI INPUT

1080p @ 50 / 59.94 / 60Hz SMPTE 424M / 425M (4:2:2)

720p @ 50Hz

720p @ 59.94 / 60Hz

1080i @ 25Hz

1080i @ 29.97 / 30Hz

1080p @ 23.98 / 24Hz

1080p @ 25Hz

1080p @ 29.97 / 30Hz

HD-SDI INPUT

SMPTE 296M -3

SMPTE 296M -1, -2

SMPTE 274M -6

SMPTE 274M -4, -5

SMPTE 274M -10, -11

SMPTE 274M -9

SMPTE 274M -7, -8

NTSC

SD-SDI INPUT

PAL B, D, G, H, I

~ 5 ~

PRO-HD2HDMI

SDI/3G-HD-SD to HDMI Converter

PESA Switching Systems, Inc.

103 Quality Circle, Suite 210

Huntsville, Alabama 35806

Tel: +1 (256) 726-9222

Fax: +1 (256) 726-9268

Email: [email protected]