advertisement
RGB headset stand with
7.1 Surround Sound
English
Introduction
RGB headset stand with 7.1 Surround
Sound
Designed for gamers, EKSA RGB headset stand with 7.1
Surround Sound features immersive surround sound and cool dynamic RGB light. Its USB ports and 3.5mm ports enable the full range of headphones to deliver better audio experience.
7.1 Virtual Surround Sound Effect
RGB headset stand with 7.1 Surround Sound supports 7.1 virtual surround sound effect via usb ports or 3.5mm jacks. If you want a better 7.1 virtual surround sound effect, please download the eksa 7.1 virtual sound software to enhance the
7.1 virtual sound effect.
The download link of 7.1 software: https://www.eksa.net/download
RGB LED & Fingerprint-touch Switch
Combining 8 zones lights, RGB headset stand with 7.1
Surround Sound can bring you more environmental options. The fingerprint-touch switch enables you to quickly switch ON&OFF the RGB effect.
2 x Stable USB 2.0 Ports
USB 2.0 ports allow you to connect your peripheral easily and stably, and it fits the most devices.
2 in 1 Jack & 3.5mm Sound & Mic Jack
The RGB headset stand with 7.1 Surround Sound with three interfaces can cope with different headsets, such as
3.5mm 2 in 1 sound and microphone jack, 3.5mm sound jack and 3.5mm microphone jack.
Overview
Overview
Package Contents
Headset Holder
USB 2.0 port
3.5mm mic jack
3.5mm sound jack
3.5mm 2 in 1 (mic&sound) jack
USB 2.0 port
RGB LED (8 zones)
Fingerprint-touch light switch
Type-C power port
RGB headset stand with
7.1 Surround Sound
1 X EKSA RGB headset stand holder
1 X EKSA RGB headset stand base
1 x USB cable, 1.8m
1 x Screwdriver
5 x Screws (1*Screw for Spare Screw)
1 x User manual guide
How To Install?
Top
Headset Holder
Headset Stand Base
Getting Started
1. Connect the included USB cable to the Type-C power port on the back of the EKSA RGB headset stand, and connect the opposite end to a USB port on your PC for using.
2. Check USB Sound Setting: Settings-Sound- USB
Audio Device(Set as default input & output).
[ Control Panel ]
[ Hardware and Sound ]
[ Sound ]
[ USB PnP Audio Device]
[ Set as Default Device]
[ Green Check Mark]
[System
Preferences ]
[Input ]
[Output ]
[ Sound ]
[USB PNP Audio Device ]
[USB PNP Audio Device ]
1. Get 4 screws out to connect the holder and the base.
(Remain 1*spare screw for replacement)
2. Mount the 4 screws into the screw hole with screwdriver
3.After connecting to your PC, we recommend installing
EKSA RGB headset stand 7.1 Surround Sound
Driver( www.eksa.net/download ) on PC Windows system for better sound experience.
Q&A
Q1:
A:
Which port supports 7.1 virtual surround sound effect?
7.1 virtual surround sound effect can be used on each jack (usb ports and 3.5mm jacks).
Q2:
A:
Need I download any drivers for this headset stand from your website?
We recommend installing EKSA RGB headset stand
7.1 Surround Sound Driver( www.eksa.net/download ) on PC Windows system for better sound experience.
Q3:
A:
Q4:
A:
How can i turn off the light when i don’t want to use the light?
The light of RGB headset stand with 7.1 Surround
Sound can be turned off by fingerprint-touch switch.
What device does the usb ports support?
The 2.0 usb ports support most devices, you can plug your peripheral into this headset stand.
Q5:
A:
I bought a 3.5mm jack headset, can it achieve the 7.1 virtual sound effect via your headset stand?
Yes, because RGB headset stand with 7.1 Surround
Sound is a 7.1 virtual sound effect adapter. The 7.1 virtual sound effect can be achieved after you install the driver of it.
Warranty Card
Thank you for choosing EKSA. Please read this warranty card carefully.
What this warranty covers
EKSA offers you a warranty for the product you purchased according to the following terms:
1
2
3
The warranty for the product is for a period of 24 months since the day you purchased.
The warranty is only for the original consumer and is not assignable or transferable to any subsequent consumer.
During the warranty period, EKSA or its authorized service agents will replace defective product with new item or offer refund money.
Contact Us
Thank you for choosing EKSA. Hope you enjoy our product.
Having trouble using our products? Please email us at [email protected]
with faulty products. Please attach the video and the description of the product issue. We could solve the problem with more details timely.
We will respond you soon when we receive your email.
Email: [email protected]
Telephone: 00852-6940-4955
(Mon to Fri 9:00AM - 6:30PM, GMT+8 HKT)
advertisement
Related manuals
advertisement