advertisement
MRD 2600
Modular Receiver
The MRD 2600 receiver shares the professionalgrade front-end collection from Sencore’s newest decoder designs, but removes the baseband video and audio components. This makes it a costeffective solution for single-transponder, multiservice descrambling or single channel digital turnaround applications.
With available satellite, terrestrial (8VSB, QAM-B,
DVB-T/T2/C/C2/ISDB-T), ASI, and IP input modules, in conjunction with dual-CAM DVB-CI and BISS descrambling, the MRD 2600 is ideally suited for transport stream input/output. The product is a perfect to feed internal IP distribution or front transcode infrastructure which is missing critical
RF interfaces, especially where density is not a key requirement.
The MRD 2600 provides a wide range of control options, including full configuration and status through the front panel and a clean, easy-to-use web GUI. It also features a full SNMP interface, including configurable traps on alarms for easy integration into an control system, and as with all
Sencore products, Sencore’s professional support team is just a phone call away in the unlikely event that questions should arise.
KEY FEATURES
• Built-in ASI I/O for maximum value and flexibility
• Available IP and RF satellite I/O modules:
√ 8VSB/QAM-B receiver designed for A74
√ DVB-T/T2/C/C2/ISDB-T receiver
√ TurboPSK Interface with full mode support
√ IP Interface with redundant receive paths
√ Dual, mirrored TS over IP transmission
• Flexible descrambling support
√ Two DVB-CI Interfaces supporting up to 100Mbps
√ Flexible per-PID/service configuration
√ Built-in BISS Mode 1, Mode E and multi-key
√ Up to 12 Independent BISS keys supported
• Easy-to-use web interface
• Full control, status, and alarm monitoring via SNMP
APPLICATIONS
• Multi-Service DVB-CI Decryption
Downlink a DVB-S/S2/S2X transponder, descramble with up to two professional DVB-CI CAMs, and output an IP
MPTS to downstream transcoders or decoders.
• 8VSB Reception and Turnaround
Receive local stations and output for backhaul as ASI and IP. 8VSB input interface designed for strenuous A74 reception conditions.
• Satellite Reception and BISS Descrambling
Simple solution for BISS, BISS-E, or Multi-BISS decryption. Transmit transport steam in the clear via ASI or IP for additional processing.
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
BASE UNIT FEATURES
ASI Input:
ASI Output:
Supported Bitrate:
1x 75Ω BNC
1x 75Ω BNC
250 Kbps to 200 Mbps
MRD 26000
BISS Descrambling License
Supported Modes:
Multi-BISS Support:
DVB-CI Multi-Service
With DVB-CI Module:
Up to 12 Separate Keys
MRD 26921
Mode 1, Mode E, Injected ID
MRD 26991
Enables Multi-service Descrambling
PID/Service Filtering License
Filtering:
MRD 26928
10 Independent TS (MPTS or SPTS)
created; output via IP or ASI
Table Regeneration (DVB Mode): PAT regeneration
Table Pass-through (DVB Mode): PMT, CAT, NIT pass-through Table
Regeneration (DVB Mode): PAT, SDT
Table Pass-through (DVB Mode): PMT, CAT, NIT, EIT, RST, TDT, TOT
DVB-CI DESCRAMBLING MODULE
MRD 421
Physical Interface: Adds two DVB-CI CAM Slots
Without Multi-Service License: Descrambles Decoded Service Only
With Multi-Service License: Number of Services limited by CAM
IP INPUT/OUTPUT MODULE
Physical Interface:
Input Format:
Output Format:
MPE De-encapsulation:
IP Encapsulation:
Addressing:
IGMP compatibility:
Per TS Bitrate:
MRD 127
2x RJ45, 10/100/1000 Auto-Negotiate
UDP or RTP
Constant Bitrate or Null-Stripped
RTP Header Extensions Supported
SMPTE 2022/CoP3 FEC Supported
UDP
Up to 2 PIDs
Up to 60Mbps per MPE PID
1 to 7 TS Packets per IP Packet
Unicast or Multicast
Version 1, 2 & 3
250 Kbps to 200 Mbps
MPEG/IP FEC Output License
Additional Output Formats:
MRD 26925
RTP and Header Extensions
SMPTE 2022/CoP3 FEC Supported
DVB-S/S2 INPUT MODULE
Physical Interface:
Frequency Range:
Symbol Rates:
DVB-S Modulation Modes:
DVB-S2 Modulation Modes:
LNB Power:
Control Tone Support:
Supported Roll-off Factors:
MRD 116
4x 75Ω F-Type
950-2150 MHz
1-45 MSps
QPSK (All FEC Rates)
QPSK/8PSK (All FEC Rates)
16/32APSK (with License)
Off/13/14/18/19VDC @ 450mA
22 kHz On/Off
0.35, 0.25, 0.20, 0.15, 0.10, 0.05
DVB-S2 Advanced Feature License MRD 26916
Additional Modulation Modes: 16/32/64APSK (All FEC Rates)
VCM Demodulation Support
Multistream Support (Single ISI)
MRD 2600
Modular Receiver
DVB-S/S2/S2X INPUT MODULE
MRD 116A
Physical Interface:
Frequency Range:
Symbol Rates:
4x 75Ω F-Type
950-2150 MHz
1-72 MSps with 8PSK/QPSK
1-60 Msps with 16APSK and higher
DVB-S Modulation Modes: QPSK (All FEC Rates)
DVB-S2/S2X Modulation Modes: QPSK/8PSK (All FEC Rates)
LNB Power:
16/32/64APSK (with License)
Off/13/14/18/19VDC @ 450mA
Control Tone Support:
Supported Roll-off Factors:
22 kHz On/Off
0.35, 0.25, 0.20, 0.15, 0.10, 0.05
DVB-S2/S2X Advanced Feature License MRD 26916
Additional Modulation Modes: 16/32/64APSK (All FEC Rates)
VCM Demodulation Support
Multistream Support (Single ISI)
8VSB/QAM-B INPUT MODULE
Physical Interface:
Frequency Range:
Sensitivity:
MRD 101
1x 75Ω F-Type
50-1000 MHz
-34 to +40 dBmV (A74 Compliant)
8VSB Standard:
8VSB Channel Plans:
QAM Standard:
QAM Channel Plans:
QAM Constellations:
ATSC A/53E
Broadcast
ITU Annex B/SCTE DVS-031
FCC, IRC, HRC
QAM64, QAM256
BROADCOM TURBOPSK INPUT MODULE
Physical Interface: 1x 75Ω F-Type
Frequency Range:
Symbol Rates:
950-2150 MHz
1-30 MSps
DVB-S Modulation Modes: QPSK (All FEC Rates)
TurboPSK Modulation Modes: QPSK /8PSK (All FEC Rates)
MRD 111
DVB-T/T2/C/C2/ISDB-T INPUT MODULE
Physical Interface: 1x 75Ω F-Type
Frequency Range:
Bandwidth:
Constellations:
DVB-T:
DVB-T2:
DVB-C:
DVB-C2:
ISDB-T:
MRD 115
42-1002 MHz
1.7MHz, 5 MHz, 6MHz, 7MHz, 8MHz
QPSK, QAM16, QAM64 (All FEC Rates)
QPSK, QAM16, QAM64, QAM256 (All
FEC Rates)
QAM16, QAM32, QAM64, QAM128,
QAM256 (All FEC Rates)
QAM16, QAM64, QAM256,
QAM1024, QAM4096 (All FEC Rates)
QPSK, QAM16, QAM64 (All FEC Rates)
MANAGEMENT
Connector:
Protocols:
User Interfaces:
Automation Interfaces:
Firmware Updates:
RJ-45 10/100 - Auto Negotiating
HTTP and SNMP
Full control via web GUI
Full control via front panel
Full status and control via SNMP
Configurable SNMP traps
Web services API available
Syslog message logging
Via Web GUI
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
MRD 2600
Modular Receiver
DIMENSIONS/POWER
Height:
Width:
Depth:
Power:
Supply Options:
1 RU, 1.72” (44 mm)
1 RU, 17.2” (437 mm)
14.6” (370 mm)
100-240 VAC 50/60 Hz
36-72 VDC
Single AC Power Supply (Standard)
Dual AC Power Supply
Single DC Power Supply
ENVIRONMENTAL CONDITIONS
Operating Temp:
Storage Temp:
0° to 45°C
-40°C to 65°C
Relative Operating Humidity: <95% (non-condensing)
Specifications Subject To Change Without Notice Rev
03-20 © Toner Cable Equipment, Inc.
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
advertisement