Modular Receiver

MRD 2600

The MRD 2600 receiver shares the professionalgrade front-end collection from Sencore’s newest decoder designs, but removes the baseband video and audio components. This makes it a costeffective solution for single-transponder, multiservice descrambling or single channel digital turnaround applications.

With available satellite, terrestrial (8VSB, QAM-B,

DVB-T/T2/C/C2/ISDB-T), ASI, and IP input modules, in conjunction with dual-CAM DVB-CI and BISS descrambling, the MRD 2600 is ideally suited for transport stream input/output. The product is a perfect to feed internal IP distribution or front transcode infrastructure which is missing critical

RF interfaces, especially where density is not a key requirement.

The MRD 2600 provides a wide range of control options, including full configuration and status through the front panel and a clean, easy-to-use web GUI. It also features a full SNMP interface, including configurable traps on alarms for easy integration into an control system, and as with all

Sencore products, Sencore’s professional support team is just a phone call away in the unlikely event that questions should arise.

KEY FEATURES

• Built-in ASI I/O for maximum value and flexibility

• Available IP and RF satellite I/O modules:

√ 8VSB/QAM-B receiver designed for A74

√ DVB-T/T2/C/C2/ISDB-T receiver

√ TurboPSK Interface with full mode support

√ IP Interface with redundant receive paths

√ Dual, mirrored TS over IP transmission

• Flexible descrambling support

√ Two DVB-CI Interfaces supporting up to 100Mbps

√ Flexible per-PID/service configuration

√ Built-in BISS Mode 1/E/2/CA and multi-key

√ Up to 12 Independent BISS keys supported

• Easy-to-use web interface

• Full control, status, and alarm monitoring via SNMP

APPLICATIONS

• Multi-Service DVB-CI Decryption

Downlink a DVB-S/S2/S2X transponder, descramble with up to two professional DVB-CI CAMs, and output an IP

MPTS to downstream transcoders or decoders.

• 8VSB Reception and Turnaround

Receive local stations and output for backhaul as ASI and IP. 8VSB input interface designed for strenuous A74 reception conditions.

• Satellite Reception and BISS Descrambling

Simple solution for BISS-1/E/2/CA and Multi-BISS descrambling. Transmit transport steam in the clear via

ASI or IP for additional processing.

SPECIFICATIONS

Modular Receiver MRD 2600

BASE UNIT FEATURES MRD 26000

ASI Input/Output:

Supported Bitrate:

2x 75Ω BNC

250 Kbps to 200 Mbps

BISS-1 Descrambling License

Supported Modes:

MRD 26921

Mode 0, Mode 1 with Session Word

Multi-BISS Support:

Mode E with SW and Injected ID

Up to 12 Separate Keys

BISS-2/CA Descrambling License

Supported Modes:

MRD 26922

Mode 0, Mode 1 with Session Word

Mode E with SW and Injected ID

Mode CA with Injected Private Key

Multi-BISS Support:

Mode CA with Buried Private Key

Up to 12 Separate Keys

DVB-CI Multi-Service

With DVB-CI Module:

MRD 26991

Enables Multi-service Descrambling

PID/Service Filtering License

Filtering:

MRD 26928

5 Independent TS (MPTS or SPTS)

created; output via IP or ASI

Table Regeneration (DVB Mode): PAT regeneration

Table Pass-through (DVB Mode): PMT, CAT, NIT pass-through Table

Regeneration (DVB Mode): PAT, SDT

Table Pass-through (DVB Mode): PMT, CAT, NIT, EIT, RST, TDT, TOT

DVB-CI DESCRAMBLING MODULE MRD 421

Physical Interface: Adds two DVB-CI CAM Slots

Without Multi-Service License: Descrambles Decoded Service Only

With Multi-Service License: Number of Services limited by CAM

IP INPUT/OUTPUT MODULE

Physical Interface:

Input Format:

Output Format:

MPE De-encapsulation:

IP Encapsulation:

Addressing:

IGMP compatibility:

Per TS Bitrate:

MRD 127

2x RJ45, 10/100/1000 Auto-Negotiate

UDP or RTP

Constant Bitrate or Null-Stripped

RTP Header Extensions Supported

SMPTE 2022/CoP3 FEC Supported

UDP

Up to 2 PIDs

Up to 60Mbps per MPE PID

1 to 7 TS Packets per IP Packet

Unicast or Multicast

Version 1, 2 & 3

250 Kbps to 200 Mbps

MPEG/IP FEC Output License

Additional Output Formats:

MRD 26925

RTP and Header Extensions

SMPTE 2022/CoP3 FEC Supported

8VSB/QAM-B INPUT MODULE

Physical Interface:

Frequency Range:

Sensitivity:

MRD 101

1x 75Ω F-Type

50-1000 MHz

-34 to +40 dBmV (A74 Compliant)

8VSB Standard:

8VSB Channel Plans:

QAM Standard:

QAM Channel Plans:

QAM Constellations:

ATSC A/53E

Broadcast

ITU Annex B/SCTE DVS-031

FCC, IRC, HRC

QAM64, QAM256

DVB-S/S2 INPUT MODULE MRD 116

Physical Interface:

Frequency Range:

Symbol Rates:

DVB-S Modulation Modes:

DVB-S2 Modulation Modes:

LNB Power:

Control Tone Support:

Supported Roll-off Factors:

4x 75Ω F-Type

950-2150 MHz

1-45 MSps

QPSK (All FEC Rates)

QPSK/8PSK (All FEC Rates)

16/32APSK (with License)

Off/13/14/18/19VDC @ 450mA

22 kHz On/Off

0.35, 0.25, 0.20, 0.15, 0.10, 0.05

DVB-S2 Advanced Feature License MRD 26916

Additional Modulation Modes: 16/32/64APSK (All FEC Rates)

VCM Demodulation Support

Multistream Support (Single ISI)

DVB-S/S2/S2X INPUT MODULE MRD 116A

Physical Interface:

Frequency Range:

Symbol Rates:

4x 75Ω F-Type

950-2150 MHz

1-72 MSps with 8PSK/QPSK

1-60 Msps with 16APSK and higher

DVB-S Modulation Modes: QPSK (All FEC Rates)

DVB-S2/S2X Modulation Modes: QPSK/8PSK (All FEC Rates)

LNB Power:

16/32/64APSK (with License)

Off/13/14/18/19VDC @ 450mA

Control Tone Support:

Supported Roll-off Factors:

22 kHz On/Off

0.35, 0.25, 0.20, 0.15, 0.10, 0.05

DVB-S2/S2X Advanced Feature License MRD 26916

Additional Modulation Modes: 16/32/64APSK (All FEC Rates)

VCM Demodulation Support

Multistream Support (Single ISI)

BROADCOM TURBOPSK INPUT MODULE

Physical Interface: 1x 75Ω F-Type

Frequency Range:

Symbol Rates:

950-2150 MHz

1-30 MSps

DVB-S Modulation Modes: QPSK (All FEC Rates)

TurboPSK Modulation Modes: QPSK /8PSK (All FEC Rates)

MRD 111

DVB-T/T2/C/C2/ISDB-T INPUT MODULE

Physical Interface: 1x 75Ω F-Type

Frequency Range:

Bandwidth:

Constellations:

DVB-T:

DVB-T2:

DVB-C:

DVB-C2:

ISDB-T:

MRD 115

42-1002 MHz

1.7MHz, 5 MHz, 6MHz, 7MHz, 8MHz

QPSK, QAM16, QAM64 (All FEC Rates)

QPSK, QAM16, QAM64, QAM256 (All

FEC Rates)

QAM16, QAM32, QAM64, QAM128,

QAM256 (All FEC Rates)

QAM16, QAM64, QAM256,

QAM1024, QAM4096 (All FEC Rates)

QPSK, QAM16, QAM64 (All FEC Rates)

+1.605.978.4600

www.sencore.com

SPECIFICATIONS

Modular Receiver MRD 2600

MANAGEMENT

Connector:

Protocols:

User Interfaces:

Automation Interfaces:

Firmware Updates:

Authentication:

RJ-45 10/100 - Auto Negotiating

HTTP and SNMP

Full control via web GUI

Full control via front panel

Full status and control via SNMP

Configurable SNMP traps

Web services API available

Syslog message logging

Via Web GUI

Local Login, TACACS+

DIMENSIONS/POWER

Height:

Width:

Depth:

Power:

Supply Options:

1 RU, 1.72” (44 mm)

1 RU, 17.2” (437 mm)

14.6” (370 mm)

100-240 VAC 50/60 Hz

Single AC Power Supply (Standard)

Dual AC Power Supply

ENVIRONMENTAL CONDITIONS

Operating Temp:

Storage Temp:

0° to 45°C

-40°C to 65°C

Relative Operating Humidity: <95% (non-condensing)

+1.605.978.4600

www.sencore.com