advertisement
MRD 4400
Modular Receiver Decoder
The MRD 4400 Receiver Decoder is the latest in Sencore’s long line of professional integrated receiver/decoders for distribution and monitoring applications. Latest-generation components ensure that the MRD 4400 provides the most complete feature set and the best value for a broad swath of common receiver/decoder applications. The product supports decoding of SD or HD video, encoded as HEVC, H.264 or
MPEG2, as well as up to four audio services.
The additional audio handling capability makes the MRD 4400 the perfect solution for video distributors looking to meet upcoming descriptive video requirements, while continuing to support surround, stereo, and SAP services.
As customer demands evolve, units purchased for SD decoding can be upgraded to HD via a simple software license, and with the included digital video output, video monitoring is as easy as finding the nearest standard consumer television or PC monitor.
With built-in ASI input/output capability, as well as available satellite and IP interfaces, the MRD
4400 is adaptable to most decoder use cases.
The receiver also maintains Sencore’s long tradition of ease of use, with a web interface accessible via all major browsers and complete control of the unit via the front panel keypad, and is backed by Sencore’s best-in-class ProCare support.
KEY FEATURES
• Support for All Common Video Formats
√ HEVC, H.264, MPEG2 HD or SD video
√ All formats auto-detected and switchable on-the-fly
• Up to 4 services of audio decoding or SDI pass-through with support for all major audio formats
• Dual SDI auto-switching outputs
• Built-in ASI I/O for maximum value and flexibility
• Available 8VSB/QAM-B, IP, RF satellite and
DVB-T/T2/C/C2/ISBD-T inputs
• Full complement of ancillary data output in ANC and VBI
• Closed-caption or auto-scaling subtitle overlays for monitoring or burn-in applications
• Intuitive, straightforward web interface
• Full control, status, and alarm monitoring via SNMP
APPLICATIONS
• Turn-around and Back-haul Distribution Feeds
Receive network and live feeds via RF, ASI, or IP, and simultaneously demodulate, de-encapsulate, encapsulate, and decode for local processing and reencode requirements.
• Upgrade Existing Installations
Replace existing receiver decoders to meet emerging video distribution challenges, including the need for more audio services or the transition to HEVC.
Experience industry-leading ease of use and interoperability coupled with low cost of ownership.
• Monitor Any Video Feed
Leverage quick set-up and automatic, decode-anything operation to monitor video feeds operationally or in an engineering lab.
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
AVAILABLE VIDEO DECODER MODULES
MRD 44041 ASI I/O, SDI and Analog Outputs, Discrete Audio,
Genlock Support
MRD 44040 ASI I/O, SDI and Analog Outputs, Discrete Audio
MRD 44001 ASI I/O, SDI Outputs, and Genlock Support
MRD 44000 ASI I/O and SDI Outputs
Additional Discrete Interfaces (available on MRD 44041 and 44040)
Composite Video Output: 1x 75Ω BNC
AES Audio Outputs:
Analog Audio Outputs:
NTSC, PAL-B/G/I/D/M/N
4x 75Ω BNC
2x 15 pin D-Sub (4 Stereo Services)
4x XLR Breakout Cable Available
4x BNC Breakout Cable Available
Terminal Block Cable Available
Genlock Interface (available on MRD 44041 and 44001)
Genlock Input: 1x 75Ω BNC
COMMON VIDEO DECODER FEATURES
Base Decoding (SD 4:2:0)
Video Profile/Levels: MPEG2 MP@ML
H.264 up to MP@L3
HEVC Decode License
Enables HEVC Decoding:
MRD 44765
Requires MRD 44265 Option
HD Decoding License
Additional Profile/Levels:
Additional Output Formats:
MPEG2 MP@HL
H.264 up to [email protected]
MRD 44710
HEVC up to MP@MT L4 (with License)
1920x1080i @ 25, 29.97, 30
1920x1080p @ 23.97, 24, 25, 29.97, 30
1280x720p @ 50, 59.94, 60
Additional Base Video Features
Frame Synchronization Modes: PCR-Recovered Clock
Aspect Ratio Conversion
Genlock Reference (if equipped)
Manual Selection:
Automatic Selection:
Letterbox, Center-Cut, Anamorphic
Follows AFD Codes
Output Formats: 720x576i @ 25
720x480i @ 29.97
Output Interfaces:
SD/HD-SDI:
SDI Format Support:
Digital Video:
2x 75Ω BNC
Determined by Decode License
1x HDMI-type Connector
Simultaneous SD Video Output Module
Mirrored SD SDI Outputs:
Composite Video Output:
2x 75Ω BNC
1x 75Ω BNC
NTSC, PAL-B/G/I/D/M/N
MRD 600
Simultaneous SD Video Output Module with Genlock
Mirrored SD SDI Outputs: 2x 75Ω BNC
Composite Video Output: 1x 75Ω BNC
NTSC, PAL-B/G/I/D/M/N
MRD 601
HEVC Decoding Daughter Board
Enables HEVC Licensing:
MRD 44265
Requires MRD 44765 License for decoding functionality
MRD 4400
Modular Receiver Decoder
Video Overlay Support
Closed Caption Overlays: CEA-608, CEA-708, or SCTE-20
DVB-Subtitle Overlays:
Base Audio Decoding Features
Number of Audio Services:
Audio Codecs Supported:
Output Formats:
HD/SD with Auto Scaling (EN 300743)
2 Standard, Up to 4 Available
Dolby Digital (AC-3) & Plus (EAC-3)
AAC-LC, HE-AAC, & HE-AACv2
MPEG1L2 & MPEG2L2
Linear PCM & Dolby E (Pass-through)
Digital Pass-through
PCM (Downmixed for 5.1 Sources)
Analog (Downmixed for 5.1 Sources)
Discrete Channel Audio Output License
Adds Output Formats:
MRD 44851
PCM (Decoded Discrete channels for
5.1 Sources)
Analog (Decoded Discrete channels for 5.1 Sources)
4 Service Audio Decode License
Additional Audio Services:
MRD 44840
2 Services (Total of 4 Services)
Base Audio Output Features
SDI Embedded Audio Output: 4 Audio Pairs
Ancillary Data Support
SDI ANC Data Types: AFD (SMPTE 2016)
Closed Captions (CEA-708)
OP-47 (SMPTE RDD-08)
SMPTE RDD-11
SCTE 127 (SMPTE 2031)
EN301775 (SMPTE 2031)
Time Code (SMPTE 12M-2)
SCTE 104 (SMPTE 2010 with License)
VBI Waveforms (SDI/Composite): Line 21 Captions (CEA-608)
TVG2X, AMOL-48/96 (SCTE-127)
Teletext/WSS/VPS (EN301775)
SCTE 35 to SCTE 104/Relay Output License MRD 44992
Cablelabs ESAM POIS Interface License MRD 44993
Included Transport Stream Input/Output Features
ASI Input/Output:
Supported Bitrate:
2 x 75Ω BNC
250 Kbps to 200 Mbps
BISS Descrambling License
Supported Modes:
Multi-BISS Support:
MRD 44921
Mode 1, Mode E, Injected ID
Up to 12 Separate Keys
DVB-CI Multi-Service License
With DVB-CI Module:
MRD 44991
Enables Multi-service Descrambling
PID/Service Filtering License
Filtering:
MRD 44928
10 Independent TS (MPTS or SPTS)
created; output via IP or ASI
Table Regeneration (DVB Mode): PAT regeneration
Table Pass-through (DVB Mode): PMT, CAT, NIT pass-through Table
Regeneration (DVB Mode): PAT, SDT
Table Pass-through (DVB Mode): PMT, CAT, NIT, EIT, RST, TDT, TOT
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
MRD 4400
Modular Receiver Decoder
DVB-CI DESCRAMBLING MODULE MRD 421
Physical Interface: Adds two DVB-CI CAM Slots
Without Multi-Service License: Descrambles Decoded Service Only
With Multi-Service License: Number of Services limited by CAM
IP INPUT/OUTPUT MODULE
Physical Interface:
Input Format:
Output Format:
MPE De-encapsulation:
IP Encapsulation:
Addressing:
IGMP compatibility:
Per TS Bitrate:
MPEG/IP FEC Output License
Additional Output Formats:
MRD 127
2x RJ45, 10/100/1000 Auto-Negotiate
UDP or RTP
Constant Bitrate or Null-Stripped
RTP Header Extensions Supported
SMPTE 2022/CoP3 FEC Supported
UDP, RTP (with License)
Up to 2 PIDs
Up to 60Mbps per MPE PID
1 to 7 TS Packets per IP Packet
Unicast or Multicast
Version 1, 2 & 3
250 Kbps to 200 Mbps
MRD 44925
RTP and Header Extensions
SMPTE 2022/CoP3 FEC Supported
DVB-S/S2 INPUT MODULE
Physical Interface:
Frequency Range:
Symbol Rates:
DVB-S Modulation Modes:
DVB-S2 Modulation Modes:
LNB Power:
Control Tone Support:
Supported Roll-off Factors:
MRD 116
4x 75Ω F-Type
950-2150 MHz
1-45 MSps
QPSK (All FEC Rates)
QPSK/8PSK (All FEC Rates)
16/32APSK (with License)
Off/13/14/18/19VDC @ 450mA
22 kHz On/Off
0.35, 0.25, 0.20, 0.15, 0.10, 0.05
DVB-S2 Advanced Feature License MRD 44916
Additional Modulation Modes: 16/32/64APSK (All FEC Rates)
VCM Demodulation Support
Multistream Support (Single ISI)
DVB-S/S2/S2X INPUT MODULE MRD 116A
Physical Interface:
Frequency Range:
Symbol Rates:
4x 75Ω F-Type
950-2150 MHz
1-72 MSps with 8PSK/QPSK
1-60 Msps with 16APSK and higher
DVB-S Modulation Modes: QPSK (All FEC Rates)
DVB-S2/S2X Modulation Modes: QPSK/8PSK (All FEC Rates)
16/32/64APSK (with License)
LNB Power:
Control Tone Support:
Supported Roll-off Factors:
Off/13/14/18/19VDC @ 450mA
22 kHz On/Off
0.35, 0.25, 0.20, 0.15, 0.10, 0.05
DVB-S2/S2X Advanced Feature License MRD 44916
Additional Modulation Modes: 16/32/64APSK (All FEC Rates)
VCM Demodulation Support
Multistream Support (Single ISI)
8VSB/QAM-B INPUT MODULE
Physical Interface: 75Ω F-Type
Frequency Range:
Sensitivity:
8VSB Standard:
8VSB Channel Plans:
QAM Standard:
QAM Channel Plans:
QAM Constellations:
MRD 101
50-1000 MHz
-34 to +40 dBmV (A74 Compliant)
ATSC A/53E
Broadcast
ITU Annex B/SCTE DVS-031
FCC, IRC, HRC
QAM64, QAM256
BROADCOM TURBOPSK INPUT MODULE MRD 111
Physical Interface:
Frequency Range:
1x 75Ω F-Type
950-2150 MHz
Symbol Rates:
DVB-S Modulation Modes:
1-30 Msps
QPSK (All FEC Rates)
TurboPSK Modulation Modes: QPSK /8PSK (All FEC Rates)
DVB-T/T2/C/C2/ISDB-T INPUT MODULE
Physical Interface: 1x 75Ω F-Type
Frequency Range:
Bandwidth:
Constellations:
DVB-T:
DVB-T2:
DVB-C:
DVB-C2:
ISDB-T:
MRD 115
42-1002 MHz
1.7MHz, 5 MHz, 6MHz, 7MHz, 8MHz
QPSK, QAM16, QAM64 (All FEC Rates)
QPSK, QAM16, QAM64, QAM256 (All
FEC Rates)
QAM16, QAM32, QAM64, QAM128,
QAM256 (All FEC Rates)
QAM16, QAM64, QAM256,
QAM1024, QAM4096 (All FEC Rates)
QPSK, QAM16, QAM64 (All FEC Rates)
MANAGEMENT
Connector:
Protocols:
User Interfaces:
Automation Interfaces:
Firmware Updates:
RJ-45 10/100 - Auto Negotiating
HTTP and SNMP
Full control via web GUI
Full control via front panel
Full status and control via SNMP
Configurable SNMP traps
Web services API available
Syslog message logging
Via Web GUI
DIMENSIONS/POWER
Height:
Width:
Depth:
Power:
Supply Options:
1 RU, 1.72” (44 mm)
1 RU, 17.2” (437 mm)
14.6” (370 mm)
100-240 VAC 50/60 Hz
Single AC Power Supply (Standard)
Dual AC Power Supply
ENVIRONMENTAL CONDITIONS
Operating Temp:
Storage Temp:
0° to 50°C
-40°C to 65°C
Relative Operating Humidity: <95% (non-condensing)
Specifications Subject To Change Without Notice Rev
03-20 © Toner Cable Equipment, Inc.
969 Horsham Road l Horsham, Pennsylvania 19044 USA l Phone: 215-675-2053 Fax: 215-675-7543 l [email protected]
advertisement
Related manuals
advertisement