LISTED
MODEL
90-FS-PRV-25
Factory Set (2-1/2-inch)
Pressure Reducing Valve
• Sensitive and Accurate Pressure Control
• Complies with NFPA for Class I Systems
• UL/ ULC Listed
The Cla-Val 2 ½” Model 90-FS-PRV-25 Is a UL/ULC listed Factory
Set pressure reducing valve which can be used as a standpipe valve, floor control valve and a checking device.
The valve is in compliance with NFPA for Class I systems and can handle “Flow” and “No Flow” conditions and rated for systems up to a maximum inlet pressure of 400 psi.
A brass body is standard but can be supplied with a chrome plate finish. An optional Supervisory Switch is available at an additional charge.
End Connection Options
• Female NPT x Male Hose - Angle - (FM)
• Female NPT x Female NPT- Straight - (SF)
• Groove x Groove - Angle - (GG)
Dimensions
Female x Male
• Groove x Groove -Straight -(SG)
• Groove x Male Outlet -Angle - (GM)
Groove x Male
2.5
Factory Set
Female x Male
Groove x Male
A AA BØ
10-1/2" (264.1) 10-3/4" (274.1) 6-1/4" (158.8)
12" (302.5) 12-1/4" (312.5) 6-1/4" (158.8)
C
2-3/4" (66.7)
3-3/4" (96.3)
D
3-1/4" (79.4)
3-1/4" (79.4)
CLA-VAL
1701 Placentia Avenue • Costa Mesa CA 92627 • Phone: 949-722-4800 • E-mail: [email protected] • Website cla-val.com
Copyright Cla-Val 2021 Printed in USA Specifications subject to change without notice.
E-90-FS-PRV-25 R-02/2021
